HP StorageWorks 8/80 SAN Switch & 8/80 SAN Switch Power ... · Frame Filtering Built-in Web browser...
13
The HP StorageWorks 8/80 SAN Switch is ideal for medium- to large-sized organizations that need a scalable, high- availability solution that will facilitate consolidation and the flexibility to meet rapidly evolving storage requirements. Whether an organization's requirements call for a standalone high port count switch, a high port count core switch, or a large building block for a tiered enterprise fabric, the 8/80 SAN Switch provides the highest performance, highest scalability, availability, and best investment protection available to meet the needs of today's consolidated virtual data center. To support mission-critical environments, the 8/80 SAN Switch features a non-blocking architecture with as many as 80 ports concurrently active at 8 Gbit/sec full duplex with no over-subscription-providing an aggregate bandwidth of 1280 Gbit/sec. Inter-Switch Link (ISL) trunking can supply up to 64 Gbit/sec of balanced data throughput to reduce congestion and increase bandwidth. It also supports new virtualization technologies that are driving efficiency and flexibility benefits. For example, organizations that have deployed virtual server environments require higher levels of connectivity for consolidation and higher levels of performance to cost-effectively meet the demands of virtual data centers. The 8/80 SAN Switch is an 8Gb Fibre Channel Switch and delivers up to 80 ports in a 2u footprint. The switch is available in two models with a 16 port upgrade license to add ports non-disruptively: HP StorageWorks 8/80 SAN Switch Power Pack+ with 48 active ports and value added software HP StorageWorks 8/80 SAN Switch with 48 active ports (Base) The density of the 8/80 SAN Switch uniquely enables fan-out from the core of the data center fabric with less than half the number of switch devices to manage compared to traditional 32- or 40-port edge switches. When deployed as a core SAN fabric switch, the fully enabled 80 port SAN Switch provides a single-switch core footprint that is ideal for SAN fan-out using lower-density B-series switches. This single-domain solution is ideal for environments that have high port count needs but do not require the capabilities of a director-class fabric core. The 8/80 SAN Switch provides a reliable SAN foundation by employing enterprise-class availability features such as hot- swappable, redundant, and integrated fan and power supply assemblies. Moreover, hot code load and activation help maximize application uptime with faster system upgrades and maintenance to reduce the dependency on scheduled outages. Combined with a wide range of diagnostic and monitoring functions, these capabilities help provide a highly available SAN environment. As an option for connecting switches in a fabric, the 8/80 SAN Switch provides Fibre Channel Integrated Routing capabilities. Integrated Routing provides native Fibre Channel Routing on a per-port basis rather than limiting routing to special-purpose routing switches or blades. Integrated Routing uses EX_Ports to import/export devices between fabrics, enabling selective device sharing while maintaining remote fabric isolation for higher levels of scalability and fault isolation The 8/80 SAN Switch Power Pack+ includes the 8/80 SAN Switch (Base) with additional software: Adaptive Networking, Fabric Watch, ISL Trunking, Extended Fabric, and Performance Monitor. Power Pack+ software provides the SAN administrator with the necessary tools to monitor the health and performance of the network, while also ensuring the highest levels of security, scalability and manageability. Enhanced Power Pack+ capabilities are based on the new Adaptive Networking software, a suite of tools for optimizing fabric behavior and ensuring ample bandwidth for mission-critical applications. Power Pack+ software enables infrastructure management through a single-pane-of-glass The 8/80 SAN Switch enables organizations to use 4 Gbit/sec SFPs today and upgrade to 8 Gbit/sec SFPs, so they can fully leverage their existing IT resources and seamlessly incorporate new capabilities as necessary. QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SAN Switch Power Pack+ /B-Series Family Overview DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 1
Transcript of HP StorageWorks 8/80 SAN Switch & 8/80 SAN Switch Power ... · Frame Filtering Built-in Web browser...
The HP StorageWorks 8/80 SAN Switch is ideal for medium- to large-sized organizations that need a scalable, high-availability solution that will facilitate consolidation and the flexibility to meet rapidly evolving storage requirements. Whetheran organization's requirements call for a standalone high port count switch, a high port count core switch, or a large buildingblock for a tiered enterprise fabric, the 8/80 SAN Switch provides the highest performance, highest scalability, availability,and best investment protection available to meet the needs of today's consolidated virtual data center.
To support mission-critical environments, the 8/80 SAN Switch features a non-blocking architecture with as many as 80ports concurrently active at 8 Gbit/sec full duplex with no over-subscription-providing an aggregate bandwidth of 1280Gbit/sec. Inter-Switch Link (ISL) trunking can supply up to 64 Gbit/sec of balanced data throughput to reduce congestionand increase bandwidth. It also supports new virtualization technologies that are driving efficiency and flexibility benefits. Forexample, organizations that have deployed virtual server environments require higher levels of connectivity for consolidationand higher levels of performance to cost-effectively meet the demands of virtual data centers.
The 8/80 SAN Switch is an 8Gb Fibre Channel Switch and delivers up to 80 ports in a 2u footprint. The switch is available intwo models with a 16 port upgrade license to add ports non-disruptively:
HP StorageWorks 8/80 SAN Switch Power Pack+ with 48 active ports and value added softwareHP StorageWorks 8/80 SAN Switch with 48 active ports (Base)
The density of the 8/80 SAN Switch uniquely enables fan-out from the core of the data center fabric with less than half thenumber of switch devices to manage compared to traditional 32- or 40-port edge switches. When deployed as a core SANfabric switch, the fully enabled 80 port SAN Switch provides a single-switch core footprint that is ideal for SAN fan-out usinglower-density B-series switches. This single-domain solution is ideal for environments that have high port count needs butdo not require the capabilities of a director-class fabric core.
The 8/80 SAN Switch provides a reliable SAN foundation by employing enterprise-class availability features such as hot-swappable, redundant, and integrated fan and power supply assemblies. Moreover, hot code load and activation helpmaximize application uptime with faster system upgrades and maintenance to reduce the dependency on scheduledoutages. Combined with a wide range of diagnostic and monitoring functions, these capabilities help provide a highlyavailable SAN environment.
As an option for connecting switches in a fabric, the 8/80 SAN Switch provides Fibre Channel Integrated Routingcapabilities. Integrated Routing provides native Fibre Channel Routing on a per-port basis rather than limiting routing tospecial-purpose routing switches or blades. Integrated Routing uses EX_Ports to import/export devices between fabrics,enabling selective device sharing while maintaining remote fabric isolation for higher levels of scalability and fault isolation
The 8/80 SAN Switch Power Pack+ includes the 8/80 SAN Switch (Base) with additional software: Adaptive Networking,Fabric Watch, ISL Trunking, Extended Fabric, and Performance Monitor. Power Pack+ software provides the SANadministrator with the necessary tools to monitor the health and performance of the network, while also ensuring thehighest levels of security, scalability and manageability. Enhanced Power Pack+ capabilities are based on the new AdaptiveNetworking software, a suite of tools for optimizing fabric behavior and ensuring ample bandwidth for mission-criticalapplications. Power Pack+ software enables infrastructure management through a single-pane-of-glass
The 8/80 SAN Switch enables organizations to use 4 Gbit/sec SFPs today and upgrade to 8 Gbit/sec SFPs, so they canfully leverage their existing IT resources and seamlessly incorporate new capabilities as necessary.
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Overview
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 1
Key Features and BenefitsOffers best-in-class port density and scalability for enterprise SAN switchesDelivers full 8 Gbit/sec 1:1 performance for up to 80 ports in a single-domain, optimized 2U form factorIncreases network performance with enhanced Inter-Switch Link (ISL) Trunking, which enables a high-speed datapath up to 64 Gbit/secProtects existing device investments with auto-sensing 1, 2, 4, and 8 Gbit/sec capabilitiesFeatures Ports on Demand capabilities for fast, easy, and cost-effective scalability from 48 to 80 ports in 16-portincrementsMeets high-availability requirements with redundant, hot-pluggable components, non-disruptive software upgrades,and hot code activation for a wide range of SAN configurationsProvides Adaptive Networking services such as Quality of Service (QoS) to help optimize application performance inconsolidated, virtual environmentsLeverages intelligent B-series SAN management and monitoring tools to increase operational efficiency andmaximize SAN investments.
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Features and Benefits
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 2
8/80 SAN Switch Simplifies enterprise SAN deployment by combining higher port count density withexceptional scalability, performance and reliabilityDelivers 48, 64, or 80-ports in a 2U enclosureMeets enterprise level availability requirements with redundant, hot pluggable components,no-single-points-of-failure within the switchProvides 1 Gb, 2 Gb, 4Gb, 8Gb/s* performanceEmploys optional Inter-Switch Link (ISL) Trunking to provide a high-speed data pathbetween switches which enables a high speed data path between 8Gb/s switches up to 64Gbit/sec
*Full 8Gb/s end to end storage performance requires 8 Gb/s HBAs, 8Gb/s controllers, and 8Gb/sswitches. 8Gb/s ISL performance can be obtained between two 8Gb/s switches.
Configuration Support http://h18000.www1.hp.com/products/storageworks/san/documentation.html
High-availabilityfeatures
Redundant, hot swappable cooling fansRedundant, hot swappable power suppliesEnhanced Fault Detection Logic
Parity protection on all data paths and system memory
Advanced FabricServices
Hardware and Software Enforced ZoningFrame FilteringBuilt-in Web browser management tools
Cabinet Support HP StorageWorks (22U, 36U and 42U) 9000 and 10000 G1 Series, (25U, 33U and 41U)HP System/e, and the new 42U HP 10000 G2 SeriesNOTE: To order factory integration, add 0D1 after the part number on your sales order.
Software Components, Standard, Base ModelsFrame Filtering An ASIC based capability that enables new applications and features. The switch has the ability to
"view" the first 64 bytes of the Fibre Channel frame. At this time, Frame Filtering enablesadvanced capabilities such as Advanced Zoning and Advanced Performance Monitoring.
Advanced Zoning WWN Zoning and Access Control are enforced by hardware that provides the same simpleadministration previously enforced only with software. Administrators can organize a physicalfabric into logical groups and prevent unauthorized access by devices outside the Zone.
Web Tools Web Tools is an intuitive and easy-to-use graphical interface that enables organizations tomonitor and manage SAN fabrics. Tasks can be performed through a Java-capable Web browserfrom a standard laptop, desktop PC or workstation from any location within the enterprise.
Software Components, Optional8/80 SAN Switch PowerPack+ Software Bundle
The Power Pack+ Software Bundle comes with the 8/80 SAN Switch Power Pack+ or as anoptional software bundle for the 8/80 SAN Switch. It includes the following:
Adaptive NetworkingFabric WatchPerformance MonitorExtended FabricISL Trunking
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Product Highlights
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 3
Adaptive Networking Adaptive Networking (AN) is an optional family of technologies which allow flexible control oftraffic movement within the fabric which deliver application aware management of fabricresources. Applications may be used with multiple protocols and multiple classes of service. Itincludes the following features:
Ingress Rate Limiting:
Allows the ingress bandwidth of a port to be throttled to a rate lower than negotiated with the SANnode. This could be very useful for enterprises offering stepped levels of service and enforcingSLAs.
Quality of Service (QoS):
Enables zones with high, medium, and low priorities within a fabric on a zone by zone basis. Thiscan be very useful for prioritizing array replication over MANs and WANs over less critical traffic.
Traffic Isolation Zones:
Defines paths through a fabric for some or all nodes. Failover allows a non-preferred path to beused if the preferred fails. TIZs use failover by default but it can be disabled if traffic should stop ifa preferred path fails. TIZ can be used to manually map out traffic flows within a fabric based onapplication, priority, and topology.
Fabric Watch Fabric Watch is an optional license which enables each switch to monitor the SAN for potentialfaults and automatically alert network managers to problems before they become failures. FabricWatch tracks a variety of SAN fabric elements, events, and counters. Monitoring fabric-wideevents, ports, SFPs, and environmental parameters permits early fault detection and isolation aswell as performance measurement. Each switch in the SAN needs its own Fabric Watch license.
Advanced PerformanceMonitor
This optional enabling technology helps administrators monitor and watch specific fabric metrics -- from a SID (Source ID) to a DID (Destination ID) -- so they can fine-tune and scale the fabricmore efficiently. Plus, Advanced Performance Monitoring includes the ability for early warningdetection of hot spots within the fabric, a powerful tool for maintaining overall balancedperformance.
Top Talkers is a component of Advanced Performance Monitoring and tracks the top traffic flowsfor hosts and targets for a switch port or a switch. Top Talkers can help identify the ports thatneed certain Quality of Service (QoS) attributes or it can help determine portions of the physicaltopology that need reconfiguration.
Extended Fabric Optional license which extends all of the scalability, reliability, and performance benefits of FibreChannel Storage Area Networks (SANs) beyond the native 10 km distance specified by the FibreChannel standard.
ISL Trunking For high performance enhanced Trunking, this optional license logically groups up to eight E-ports to provide a high bandwidth trunk between two switches. Each 8Gb switch needs its ownlicense. The switch operating system views the trunk as a single, high bandwidth resource (up to64Gb) when routing connections between 8G switches. Connections are load-balanced acrossthe individual links, which comprise the logical trunk group.
Fabric Manager The optional Fabric Manager is a highly scalable, Java-based application that manages multipleswitches and multiple fabrics (up to eight) in real time, helping SAN administrators with SANconfiguration, monitoring, dynamic provisioning, and daily management. SAN administrators gainrapid access to critical SAN information across multiple personality fabrics.
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Product Highlights
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 4
Integrated Routing Integrated Routing is an optional license which provides native Fibre Channel Routing (FRC) on aper-port basis, rather than limiting routing ports to those on a dedicated routing blade or switch.Just like traditional FCR, Integrated Routing uses EX_Ports to import/export devices betweenfabrics, enabling selective device sharing while maintaining remote fabric isolation. IntegratedRouting provides architecture flexibility to route on a port-by-port basis, enabling increasedscalability and fault isolation.
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Product Highlights
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 5
Warranty (1-1-1) Hardware Warranty - One-year on-site warranty, normal business hours, next businessday response, installation not included.NOTE: The hardware warranty covers firmware and embedded non-saleable software.Saleable software carries its own warranty, see below.Software Warranty - HP warrants only that the software media will be free of physical defects fora period of ninety (90) days from delivery.
EXCLUSIVE REMEDY: The entire liability of HP and its suppliers and your exclusive remedy forsoftware that does not conform to this Limited Warranty shall be the repair or replacement of thedefective media. This warranty and remedy are subject to your returning the defective mediaduring the warranty period to HP in the country in which you obtained the software.
HP Service & WarrantySupport
HP Service & Warranty Support Additional Warranty protection and/or HP Installation packagescan be purchased.NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center fordetails. HP provides a one-year, hardware limited warranty, fully supported by a worldwidenetwork of resellers and service providers. The first year of Rights to New License Version andstandard business day, standard business hours telephone support is included with the purchaseof an HP Power Pack+. In order to continue to receive telephone support and Rights to NewLicense Version after the first year, the purchase of a software support contract or Care Pack isrequired.In addition, available service offerings include a full range of HP Care Pack packaged hardwareand software services:
InstallationExtended coverage hours and enhanced response timesSystem management and performance services
For more information on warranty and support options, please visit our Web site at:http://www.hp.com/hps/tech/storage/supp/.
Software ProductServices
Stand-alone telephone supportRights to new license versionMedia and documentation updates
Hardware ProductServices
Installation servicesOn-site maintenance (includes warranty support)Response time upgrades during the warranty periodPost-warranty coverage
HP Care Pack ServicesWarranty UpgradeOptions
Service offerings include a full range of Customer HP Care Pack services for both hardware andsoftware services:
Response - Upgrade on-site response from next business day to same day 4-hoursCoverage - Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hoursDuration - Select duration of coverage for a period of 1, 3, or 5 years
NOTE: Recommended service for these set of switches is SUPPORT PLUS 24Additional Warranty protection and/or HP Installation packages can be purchased.NOTE: Certain restrictions and exclusions apply. Consult the HP Customer Support Center fordetails
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Service and Support, HP Care Pack, and Warranty Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 6
HP Care PackInformation
HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specificduration and hours of coverage.
HP Care Pack is not available for less than the product's warranty duration.HP Care Pack is available for sale anytime during the warranty period for most products,but the commencement date will be the same as the Warranty Start Date (delivery date toend user customer). Proof of purchase may be required.HP Care Pack services are prepaid.
For additional HP Care Pack (hardware & software) information, as well as orderable partnumbers, please refer to the URL listed below:http://h20219.www2.hp.com/services/cache/10950-0-0-225-121.html
Additional Services Installation service; SAN Solution service; SAN-Environmental Support service; SAN Architectureservice; Proactive 24For more information on these and other service options, please contact any of our worldwidesales offices or visit our Web site at: http://www.hp.com/hps/support
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Service and Support, HP Care Pack, and Warranty Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 7
Features 8/8 SAN SwitchBase and 8/8 SAN
Switch
8/24 SAN SwitchBase
8/40 SAN Switchand 8/40 SANSwitch Power
Pack+
8/80 SAN Switchand 8/80 SANSwitch Power
Pack+
DC SAN BackboneDirector Power
Pack+
TargetedEnvironment
Workgroups,Departments
Workgroups,Departments
Workgroups,Departments
Workgroups,Departments
Data Centers
Port Bandwidth 8Gbit/sec 8Gbit/sec 8Gbit/sec 8Gbit/sec 8Gbit/secAggregate device
bandwidth128 - 384 Gbit/sec
end-to-end256 - 384 Gbit/sec
end-to-end384 - 640 Gbit/sec
end-to-end768 - 1280 Gbit/sec
end-to-end6.5 Tbit/sec end-to-
endOS Support NOTE: Please Refer to SAN Design Guide
http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguideStorage system
supportXP, EVA, MSA
Ports 8 Enabled24 Max
16 Enabled24 Max
24 Enabled40 Max
48 Enabled80 Max
Up to 384
SFP B-series B-series B-series B-series B-seriesAdvancedTrunking
Optional Upgrade Included with PowerPack+ or Optional
Upgrade
Included with PowerPack+ or Optional
Upgrade
Included with PowerPack+ or Optional
Upgrade
Included with PowerPack+ or Optional
UpgradeAdaptive
NetworkingOptional Upgrade Included with Power
Pack+ or OptionalUpgrade
Included with PowerPack+ or Optional
Upgrade
Included with PowerPack+ or Optional
Upgrade
Included with PowerPack+ or Optional
UpgradeForm factor 1U 1U 1U 2U 14U
Zoning Software Yes (Included) Yes (Included) Yes (Included) Yes (Included) Yes (Included)Hot plug,redundant
power supplies
No No Yes Yes Yes
Hot plug fans No No Yes Yes Yes
Features 4/8 SAN SwitchBase and 4/8 SAN
Switch
4/16 SAN Switchand 4/16 SANSwitch Power
Pack
4/32B SAN Switchand 4/32B SANSwitch Power
Pack
4/64 SAN Switchand 4/64 SANSwitch Power
Pack
4/256 SAN Directorand 4/256 SANDirector Power
PackTargeted
EnvironmentWorkgroups,Departments
Workgroups,Departments
Workgroups,Departments
Workgroups,Departments
Data Centers
Port Bandwidth 4Gbit/sec 4Gbit/sec 4Gbit/sec 4Gbit/sec 4Gbit/secAggregate device
bandwidth64 Gbit/sec end-to-
end128 Gbit/sec end-
to-end128-256 Gbit/sec
end-to-end512 Gbit/sec end-
to-end3.2 Tbit/sec end-to-
endOS Support NOTE: Please Refer to SAN Design Guide
http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguideStorage system
supportXP, EVA, MSA
Ports 8 Enabled16 Max
16 Enabled 16 Min32 Max
32 Min64 Max
Up to 384
SFP HP HP HP HP HPAdvancedTrunking
Optional Upgrade Included with PowerPack or Optional
Upgrade
Included with PowerPack or Optional
Upgrade
Included with PowerPack or Optional
Upgrade
Included with PowerPack or Optional
UpgradeForm factor 1U 1U 1U 2U 14U
Zoning Software Yes (Included) Yes (Included) Yes (Included) Yes (Included) Yes (Included)Hot plug,redundant
power supplies
No No Yes Yes Yes
Hot plug fans No No Yes Yes Yes
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Family Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 8
Features Embedded SAN Switchfor EVA4400
Brocade 4Gb SANSwitch for HP c-Class
BladeSystem
HP 400 Multi-protocolRouter
B-Series Multi-protocolRouter Blade
TargetedEnvironment
Workgroups,Departments
Workgroups,Departments
Workgroups,Departments
Data Centers
Port Bandwidth 8Gbit/sec 4Gbit/sec 4 Gbit/sec Ethernet: 1Gbit/sec
4 Gbit/sec Ethernet: 1Gbit/sec
Aggregate devicebandwidth
320 Gbit/sec end-to-end 192 Gbit/sec end-to-end 128 Gbit/sec end to end N/A
OS Support NOTE: Please Refer to SAN Design Guidehttp://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguide
Storage systemsupport
XP, EVA, MSA
Ports 20 external per EVAController Pair
4 or 8 external /8 or 16 internal
18 ports: 16 FC and 2Gigabit Ethernet
18 ports: 16 FC and 2Gigabit Ethernet
SFP B-series HP HP HPAdvancedTrunking
Optional Upgrade Optional Upgrade Optional Upgrade Optional Upgrade tochassis
AdaptiveNetworking
Included with PowerPack+ or Optional
Upgrade
No No Optional Upgrade to DCSAN Director Backbone
ChassisForm factor Embedded Embedded 1U Blade in SAN Director
Zoning Software Yes (Included) Yes (Included) Yes (Included) Yes (Included)Hot plug,redundant
power supplies
Yes, in EVA 4400Enclosure
Yes, in BladeSystemEnclosure
Yes Yes, in SAN Directorchassis
Hot plug fans Yes, in EVA 4400Enclosure
Yes, in BladeSystemEnclosure
Yes Yes, in SAN Directorchassis
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Family Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 9
Step 1 - Base ConfigurationSelect one: Model Model Description Part Number8/80 Power Pack+, 48Full Fabric PortsEnabled, SAN Switch
8/80 SAN Switch with 48 active ports; rackmount kit; accessory kit (enterprisesafety and regulatory information, installation guide, rack-mounting instructions),power cords, serial cable, base software of Advanced Fabric OS, AdvancedWeb Tools, Advanced Zoning, and Power Pack+ software of AdaptiveNetworking, ISL Trunking, Extended Fabric, Advanced Performance Monitoring,and Fabric Watch.NOTE: Requires optical transceivers listed below
AM872A
8/80 Base (48) FullFabric Ports EnabledSAN Switch
8/80 SAN Switch with 48 active ports; rackmount kit; accessory kit(enterprise safety and regulatory information, installation guide, rack-mountinginstructions), power cords, serial cable, and base software of Advanced FabricOS, Advanced Web Tools and Advanced Zoning.NOTE: Requires optical transceivers listed below
AM871A
StorageWorks 8/80SAN Switch 8Gb 16-port Upgrade LTU
16 port upgrade license for 8/80 Power Pack+ SAN Switch (AM872A) and 8/80Base SAN Switch (AM871A)
T5520A
Step 2 - OptionsSelect each type of required options with quantities specified: Model Description Quantity Part Number8 Gb Transceivers HP 8Gb Short Wave B-Series FC SFP+ 1 Pack 1 AJ716A
Distance OM2 Cable OM3 Cable8Gb performance: 50 meters 150 meters4Gb performance: 150 meters 270 meters2Gb performance: 300 meters 500 meters
4 Gb Transceivers HP 4Gb Short Wave B-Series FC SFP 1 Pack 1 AJ715ADistance OM2 Cable OM3 Cable4Gb performance: 150 meters 270 meters2Gb performance: 300 meters 500 meters1Gb performance: 500 meters 860 meters
HP 4Gb Long Wave B-Series FC SFP 1 Pack - 10km 1 AK870AHP 4Gb Long Wave B-Series FC SFP 1 Pack - 30km 1 AN211A
Optical Cables OM2 LC-LC type cables 2 m LC-LC Multi-Mode Fibre Channel Cable 1 221692-B215 m LC-LC Multi-Mode Fibre Channel Cable 1 221692-B2215 m LC-LC Multi-Mode Fibre Channel Cable 1 221692-B2330 m LC-LC Multi-Mode Fibre Channel Cable 1 221692-B2650 m LC-LC Multi-Mode Fibre Channel Cable 1 221692-B27OM3 LC-LC type cables .5 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ833A1 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ834A2 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ835A5 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ836A15 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ837A30 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ838A50 m LC-LC Multi-Mode OM3 Fibre Channel Cable 1 AJ839ALC-SC for between a 1 Gb and a 2 Gb device 2 m LC-SC Multi-Mode Fibre Channel Cable 1 221691-B215 m LC-SC Multi-Mode Fibre Channel Cable 1 221691-B2215 m LC-SC Multi-Mode Fibre Channel Cable 1 221691-B2330 m LC-SC Multi-Mode Fibre Channel Cable 1 221691-B26
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Configuration Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 10
50 m LC-SC Multi-Mode Fibre Channel Cable 1 221691-B27
Step 3 - Optional SoftwareSoftware for 8/80 SANSwitch
Fabric Manager , v5.x Base Edition (10 domains) T4270AFabric Manager, v5.x Enterprise Edition T4269AFabric Manager, v4 to v5 Enterprise License Upgrade T4272AFabric Manager, v4 to v5 Base License Upgrade T4271AFabric Manager, v5 base to v5 enterprise upgrade license T4273AHP B-series 48-80 Port SAN Switch Power Pack+ Upgrade LTUNOTE: The Power Pack+ Software Bundle kit includes Adaptive Networking,Fabric Watch, ISL Trunking, Extended Fabric, and Advanced PerformanceMonitor.
T5523A
Adaptive Networking T5526AExtended Fabric 313458-B21Fabric Watch 313454-B21Advanced Performance Monitor 313450-B21ISL Trunking 313452-B21HP B-series 48-80 Port SAN Switch Integrated Routing LTU T5529A
Fibre ChannelStandards AndRevisions
FC-FG Rev 3.5FC-PH-2 Rev 7.4FC-AL-2 Rev. 7.0
FC-AL Rev. 4.5FC-GS-2 Rev 5.3FC-PH Rev 4.3
FC-FLA Rev 2.7FC-PH-3 Rev 9.4
FC-PLDA Rev 2.1FC-SW Rev 3.3
FC-VI Rev 1.5IPFC RFC 2625
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Configuration Information
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 11
System Architecture Fibre Channel ports 80 ports, universal (E, F, and FL)Scalability Full fabric architecture:
http://h18006.www1.hp.com/products/storageworks/san/documentation.html
Certified maximum Refer to SAN Design Guide for current configuration information:http://h18006.www1.hp.com/products/storageworks/san/documentation.html
Interoperability SAN Switch 8, SAN Switch 16, SAN Switch 8-EL, SAN Switch 16-EL,SAN Switch 2/8v, SAN Switch 2/16v, SAN Switch 2/16N, SAN Switch2/16, SAN Switch 2/16-EL, Core Switch 2/64, SAN Switch 2/32, SANDirector 2/128; 4/256 SAN Director; 4/64 SAN Switch ; 4/32 SANSwitch; 4/8 SAN Switch; 4/16 SAN Switch; 8/8 SAN Switch, 8/24 SANSwitch, 8/40 SAN Switch, DC SAN Backbone Director, Brocade 4GbSAN Switch for HP p-Class BladeSystem; Brocade 4Gb SAN Switch forHP c-Class BladeSystem; MSA SAN Switch 2/8; HP 400 MP-Router;and HP MP-Router
Performance 1.063 Gbit/sec line speed, full duplex; 2.125 Gbit/sec line speed, fullduplex; 4.25 Gbit/sec line speed, full duplex; 8.5 Gbit/sec line speed, fullduplex. Auto-sensing of 1 Gbit/sec, 2 Gbit/sec, 4 Gbit/sec ,and 8Gbit/sec port speeds; optionally programmable to fixed port speed.Speed-matching between 1, 2, 4, and 8 Gbit/sec ports.
ISL Trunking Up to eight 8 Gbit/sec ports per ISL trunk; up to 64 Gbit/sec per ISLtrunk
Aggregate bandwidth 1360 Gbit/sec full duplex (80 ports x 8.5 Gbit/sec x 2)Fabric latency 2100 nanoseconds with no contention, cut-through routing at
8 Gbit/secMaximum frame size 2112-byte payloadClasses of service Class 2, Class 3, Class F (inter-switch frames)Port types FL_Port, F_Port, E_Port, EX_Port, M_Port (Mirror Port), and self-
discovery based on switch type (U_Port).Data traffic types Fabric switches supporting unicast, multicast (255 groups), and
broadcastMedia types Hot-pluggable, industry-standard Small Form Factor Pluggable (SFP),
LC connector; Short-Wave Laser (SWL), Long-Wave Laser (LWL);Extended Long-Wave Laser (ELWL); distance depends on fiber-opticcable and port speed. Supports B-series SFP (4/2/1 Gbit/sec) and/or B-series SFP+ (8/4/2 Gbit/sec) optical transceivers.
Fabric services Simple Name Server (SNS); Registered State Change Notification(RSCN), NTP v3, Reliable Commit Service (RCS), Dynamic PathSelection (DPS), Advanced Zoning (default zoning, port/WWN zoning,broadcast zoning), NPIV, FDMI, Management Server, FSPF, FabricWatch; Extended Fabrics; ISL Trunking; Advanced PerformanceMonitoring, Adaptive Networking (per-data flow QoS, Ingress RateLimiting, Traffic Isolation, fabric dynamics profiling, application "TopTalkers" report), Integrated Routing, IPFC
Options SFP media, USB DeviceManagement Management software
supportedTelnet; SNMP (FE MIB, FC Management MIB); Advanced WEBTOOLS; Fabric Manager (optional)
Management access 10/100 Ethernet port (RJ-45); Serial port (RS-232); in-band throughManagement Server
Diagnostics POST and embedded online/offline diagnosticsMechanicals Enclosure Back-to-front airflow; power from back; 2U
Size Width: 42.88 cm (16.88 inches)Height: 8.60 cm (3.40 inches)Depth: 61.05 cm (24.00 inches)
System Weight 34 lbs with two power supply FRUs, without SFP/SFP+ transceiversEnvironment Temperature Operating: 0°C to 40°C (32°F to 104°F)
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Technical Specifications
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 12
Non-operating: -25°C to 70°C (-13°F to 158°F)Humidity Operating: 10 to 85 percent non-condensingAltitude Operating: Up to 3000 meters (9842 feet)
Storage: Up to 12 kilometers (39,370 feet)Shock Operating: 20 g, 6 ms half-sine
Non-operating: 33 g, 11 ms, 3/eg AxisVibration Operating: 0.5 g sine, 0.4 grms random, 5 to 500 Hz
Non-operating: 2.0 g sine, 1.1 grms random, 5 to 500 HzAirflow High speed 60 CFM (cu. ft./min)
Low speed 44 CFMPower Maximum
Consumption275 Watts (80 ports at 8 Gbit/s)
Nominal consumption 260 WattsAC input voltage 85- 264 VAC, UniversalInput line frequency 47 - 63 HzMinimum input voltage 85 VACMaximum input voltage264 VACHeat Dissipation 938 BTU/hr
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying suchproducts and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable fortechnical or editorial errors or omissions contained herein.
QuickSpecs HP StorageWorks 8/80 SAN Switch & 8/80 SANSwitch Power Pack+ /B-Series Family
Technical Specifications
DA - 12995 Worldwide QuickSpecs — Version 2 — 7.11.2008 Page 13
