How to update Kaspersky PURE 3.0 offlineBack to "Setting Update"2013 Feb 15 ID: 9499 

 

In order to update all necessary databases and application modules of Kaspersky PURE 3.0, you can use a special update utility, which should be run manually from another computer or from an USB device which is connected to the computer with the Internet connection. First time the utility is launched all databases and modules necessary for the application and released to the present moment are loaded into a special folder, which resides in the folder with the update utility. With each next start only missing, i.e. recently released, databases and modules will be loaded into the folder. By February, 2013 the size of Kaspersky PURE 3.0 databases takes about 410 MB on the flash carrier. Bear this information in mind, when selecting a flash carrier to store the updates for the application. With the time the size of the updates is only going to increase. The update method described below is auxiliary, not the basic one; use this method if the computer with installed Kaspersky PURE 3.0 has no Internet connection. The described update method does not provide an instantaneous delivery of the released updates and consequently does not keep the application in the actual state.

Brief instructions how to use the utility

1. Download an archive with the update utility for_crystal_13.0.2.558.zip.2. Save the folder with the utility on the removable USB device, connect it to the computer with the

Internet connection.3. Run the utility (the file Updater.bat).4. Once the work of the utility is over, connect the USB device to the computer (without the Internet

connection) with Kaspersky PURE 3.0 installed.5. Configure Kaspersky PURE 3.0 to update from a folder which contains the databases on the

removable USB device (theUpdates folder).

In future regularly connect the same flash-carrier to any computer with the Internet connection and download new databases (i.e. run theUpdater.bat file) and update your Kaspersky PURE 3.0 using the USB device.

See below step-by-step instructions how to use the update utility.

 

 

 

Step 1. Start working with the update utility

1. Download the update utility for_crystal_13.0.2.558.zip.2. Unpack the downloaded utility (using WinZip, for example) on another computer which is

connected to the Internet or to an USB drive which is connected to the computer with the Internet connection.

Pay attention, the full path to the folder with the update utility should contain only Latin symbols and should not contain space characters!

 

 

 

Step 2. Run the update utility

1. In the folder with the utility find and double-click the file Updater.bat.

A command prompt window will open, which means the download of databases and modules has started (the name and path to the fileUpdater.exe may differ on your computer from the one on the picture below).

If you connect to the Internet via a proxy-server, then add proxy-server settings to the file for_crystal_13.0.2.558.ini the following way:

o In the utility folder find and double-click the file for_crystal_13.0.2.558.ini.

o In the window for_crystal_13.0.2.558.ini in the Proxy Settings section find your proxy server settings (instead of the default settings):o Address (proxy_url).o Port (proxy_port).o Login (proxy_login).o Password (proxy_pwd).

o Save the file for_crystal_13.0.2.558.ini by pressing Ctrl+S on the keyboardor

In the upper left part of for_crystal_13.0.2.558.ini window select File –> Save.

o Close the file.

2. When the window disappears, in the folder of the update utility open the file iupdater.txt and make sure the file contains the record Retranslation successful and update is not requested (implying successful update).

 

 

 

Step 3. Update Kaspersky PURE 3.0

1. Connect a flash-card to the computer with the Internet connection with Kaspersky PURE 3.0 installed.

2. Open the main program window .3. In the upper right part of the window click the Settings link.

4. In the Settings window go to the Update tab.5. In the right part of the Settings window click the Update source button.

6. In the Update window on the Update source tab clear the box Kaspersky Lab update servers. Click the Add button.

7. In the Update source window select the Updates folder from the utility folder. Click OK.

8. In the Update window click the OK button.

9. In the Settings window click the OK button.

10. Run the databases update process .