How to SIM unlock Samsung Galaxy S4 SGH-M919 (T-Mobile S4)

FAQ: Is this for real? Does it really unlock?

YES! Many people have tried it, and most people have successes.If you are having problems with the unlock process, please read the rest of the FAQ.

Will this SIM unlock work on my model of Galaxy S4 that is not T-Mobile (SGH-M919)?This unlock has been tried on the T-Mobile (USA) version of the phone, if you're coming from any other model, YMMV, it might or might not work.That being said, many others have tried it on the AT&T model, and on the international I9505 with success.

Do I need to be on stock rom?Yes, you need to be on stock rom for this to work.One of the main causes of failure to unlock is people not flashing back to stock rom first. The reason is the special dial codes only work on stock roms.

Is the unlock permanent? Do the unlock last through reboot/reflash/etc.?Yes, the unlock is permanent.You can reflash a custom rom, or do anything you want to the phone, and the unlock will stay.

In step 7, my phone is already "SHA256_ENABLED_FLAG[0]", what should I do?Great, this is the setting you want.It means your phone already allows you to make some settings changes, it DOES NOT mean your phone is already unlocked.You should continue with the rest of the process until the last step.

In step 14, backup missing.If the golden backup doesn't exist, try the work around found by GrndSers-Rcng:I was having the issue of trying and trying and not getting it unlocked... Mine had the [0] at the end already but the Current Command wasnt 116631... If this happens to you, you have to get the [0] value to [1]...how to do it? Do step 6 but select [2] Perso sha256 on, then do step 7 and 8 and then you should have the [1] value as it states on the OP... Now follow the OP instruction from step 6 all the way to the end (on step 7 you should see Current Command is 116631, thats how you know it worked). If on NV REBUILD there is no backup, make one (option 3) then restore that back up (option 4), wait till it reboots, pop a non tmobile SIM and you should be unlock...

How do I know the unlock is successful?If your phone is not unlocked, when you put in an unauthorized SIM card, a dialog pops up on your phone asking you to enter the unlock code.If you're successful with this procedure, there would be no popup dialog asking for the unlock code when you put in any SIM card.

1

Here are the steps:1. Goto phone dailer, and enter *#27663368378# for the debug service menu.2. In "ServiceMode", select [1] UMTS

3. In "UMTS MAIN MENU", select [1] DEBUG SCREEN

4. In "DEBUG SCREEN", select [6] PHONE CONTROL

5. In "PHONE CONTROL", select [6] NETWORK LOCK

6. In "NETWORK LOCK", select [3] PERSO SHA256 OFFIt should show:SHA256_ENABLED_FLAG[1]SHA256_OFF => SHA256_ON

7. Now touch the first line SHA256_ENABLED_FLAG[1]It should show:MENU NOT EXISTPRESS BACK KEYCurrent Command is 116631

8. Now press the menu button and select "Back"It should show:SHA256_ENABLED_FLAG[0]SHA256_OFF => Not Change

9. Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen

10. Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen

11. Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen

12. Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen

13. Select [6] COMMON

14. In "COMMON" screen, select [6] NV REBUILDNow you are in the "NV REBUILD" screen, you should see the following text:------------------------------Golden-Backup existYou can Restore Cal/NV------------------------------

15. Now for the final step.In "NV REBUILD" screen, select [4] Restore Back-upThe button lights for menu and back should come on, and the phone will auto reboot in a few seconds.Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.

2

Congratulations, your phone is now unlocked.Stick in a sim card from a different carrier and try it out.

Thanks, and good luck!

3