How to Open Logitech Harmony 1100This guide explains how to get inside the Logitech Harmony 1100

Written By: Keegan Williams

How to Open Logitech Harmony 1100

iFixit CC BY-NC-SA www.iFixit.com Page 1 of 5

TOOLS:iFixit Opening Tools (1)

Phillips #00 Screwdriver (1)

JIS Driver Set (1)

How to Open Logitech Harmony 1100

iFixit CC BY-NC-SA www.iFixit.com Page 2 of 5

https://www.ifixit.com/Store/Parts/iFixit-Opening-Tool/IF145-335-2https://www.ifixit.com/Store/Parts/Phillips-00-Screwdriver/IF145-006-3http:/IF145-115-1

Step 1 How to Open Logitech Harmony 1100

Remove battery cover, pushing down on circled areas and pushing outward

Remove battery by lifting up on corner exposed by indent in case

Step 2

Use a J0 screwdriver head

Remove 3 screws from batterycompartment

How to Open Logitech Harmony 1100

iFixit CC BY-NC-SA www.iFixit.com Page 3 of 5

To reassemble your device, follow these instructions in reverse order.

Step 3

Open connector port on side

Remove screw with PH00 screwdriver head

Step 4

Use plastic opening tool to pry at the open slits on the side.

One or two silver foam cubes may pop out of the device. These belong in the slots shown in thethird picture. They do not need to go back until reassembly.

Also the plastic connector door will fall off. It will need to be put back upon reassembly.

How to Open Logitech Harmony 1100

iFixit CC BY-NC-SA www.iFixit.com Page 4 of 5

This document was last generated on 2017-06-27 03:42:22 AM.

How to Open Logitech Harmony 1100

iFixit CC BY-NC-SA www.iFixit.com Page 5 of 5

How to Open Logitech Harmony 1100Written By: Keegan Williams

TOOLS:Step 1 How to Open Logitech Harmony 1100Step 2Step 3Step 4