HOW TO MOUNT EMERGENCY LIGHTS AND EXIT SIGNS

It is vital to consult an electrician if you are not sure with the secure safety procedures. Electrical wiring of a building or residence will be connected by emergency light,so that it can sense when the power goes out.

Emergency light should be connected to be tripped before installing your emergency light to avoid shock and possible electrocution. Check out your backup battery have been installed properly as well.

Incorrect emergency light installation can burn out the transformer and circuit board, causing the unit to become inoperable and broken.

EMERGENCY LIGHT MOUNTING PROCEDURE

Most of the emergency lights use mounting brackets for installation. it is very important to familiarize yourself with your particular model and its instructions for mounting.

EXIT SIGN MOUNTING PROCEDURE

It should be specified what sign will be connected to both building power and a backup generator. Some exit signs will have a side mounting bracket according to the design.

EMERGENCY LIGHTING REQUIREMENTS

Every area must be illuminated by emergency lighting where visitors or personal are present. that means all the corridors to all exits must also be illuminated in conjunction with the exit doors themselves.

FINDING THE RIGHT INSTALLATION PROFESSIONAL

You can save a lot of time to install emergency lights by Finding the right professional. There are some criterial to ask when finding an installation professional. The first question is do I need a professional?

Please call 800-480-0707 right now for more information, to request a quote, or place an order. Our friendly staff is here 24/7 to help you with any need related to emergency lighting products, applications, and compliance. Installing emergency lighting fixtures has never been easier with help from Emergency Lights Co.

Check out this article for more information

http://www.emergencylights.net/how-to-mount-emergency-lights-and-exit-signs