How to Make Bird's Nest Ring DIY Jewelry Making Tutorial
-
Upload
houseofgemscom -
Category
Design
-
view
225 -
download
2
Transcript of How to Make Bird's Nest Ring DIY Jewelry Making Tutorial
How To Make: Bird’s Nest Ring
Materials: 10 Inches of 20 Gauge Copper Wire, 3 Jade Beads – Size 4 mm
Tools: Wire Cutter, Round Nose Pliers, Mandrel
Take Notice that 10” of the wire is for a ring in size 7, if you wish to make smaller or bigger ring,You need to cute more or less wire!
Step 1: Insert the bead onto the wire. It should be in the middle of it
Step 2: Wrap wire around the mandrel as shown in the photo
Step 3: Put other beads onto the wires
Step 4: Bend wires around the eye of the ring creating round shape/frame of it
Step 5: Take the ring off the mandrel
Step 6: Wrap remaining wires around the base. Trim wire if you need to and smooth the edges
Step 7: Put ring again on the mandrel (in case the band was bent a little during creating). Now your ring is ready to wear!