Integration -Electric fence

Dragon Cai/Product Manager

Two integration way

• NO/NC output

• DC12V

NO/NC output

• The most common integration for security products,such as DVR,alarm system,digital map,etc

• NO/NC means normally open or normally close

• There are three pins on NO/NC port:NO,COM,NC

How it works

• You can integrate any security products only if there has NO/NC port(Alarm in)

• In normal situation,the circuit will be open(close),but when there is alarm,it will be close(open) to trigger other security products.

• The main function of NO/NC is trigger,through open/close to trigger other security products.

• It can not be used as a specific tool to control the energizer or other security products(i.e,when connected to alarm system,when the electric fence wire is cut,the alarm system will receive the alarm signal from the energizer,but you can not control it)

How to connect

CircuitWhen in normal situation of NO

When in alarm of NO

Integration plate

• Every integration plate can integrate 8 devices,can upgrade to 32 devices max.

• Usually used in sensor and cctv integration

• Convert RS485 to NO/NC to trigger

DC12V output

DC12V output can integrate any security products below 10W,such as siren,speaker.

Simply connect the siren or light to the DC12V port

Light

Integration of siren and light

Thanks!!

• Any more question,please contact us for detail.

• Dragon@tonghertech.com• Tel:+86-755-23710212

Shenzhen Tongher Technology Co.,Ltd www.tonghertech.com