How to Install V5.55 XPROG-M BOX Software

http://www.vipprogrammer.com/china-xprog-

ecu-programmer-device-xprog-m-box-progra

mmer-564

2015 V5.55 XPROG-M ecu programmer can supports decryption BMW CAS4, V5.55 xprog-m

Box with USB dongle, i will make your programming work more secure, do you know how to

install V5.55 XPROG-M BOX Software correctly.

Insert the CD (Package comes with XPROG-Box Software V5.55) into PC CD-ROM

driver;

Open XPROG-BOX V5.55 (F:) >> XPROG-BOX5.55 File >> AdbeRdr;

Automatically preparing installation for Adobe Reader X;

Just follow the instruction prompts to finish Adobe Reader Setup;

Run config and then click “Yes” to make sure adding information to the

registry;

Copy XPROG-BOX5.55 Encryption software file and paste in Disk C;

Back to Disk F to open Path File, run Install;

Wait for Hardware Wizard Interface popped out;

Follow instruction prompts to complete setup;

Open Computer Management to check whether set up good connection with

XPROG-BOX Programmer;

Go back to Local Disk C to open XPROG-BOX5.55 Encryption software file,

and then find and run XProgDesktop, next come out Universal XPROG-M

software interface;

Select Accept;

Select Option >> Environment…

Make sure the communication port is COM4: XPROG-box programmer – USB;

Click OK;

Click Device (on the top, mark red);

Choose AT93C66 in the Device Selection (via drop-down menu);

Click OK;

Via the Read icon you can perform device reading:

Click Help >> Hardware Information to know more about XPROG information

as below: