www.rimpro-india.com

Welcome To

Rimpro India

Demulsifiers and Corrosion Inhibitor

Demulsifiers are chemicals that are used to separate emulsions.

Corrosion is the process of rust formation in metal parts which will gradually reduce the capacity and purity of metals.

Role of Demulsifiers in an Oilfield

In industrial settings, the most common emulsions are oil in water or water in oil. The latter is common in oilfields.

Separation of water from the crude oil is essential because water can alter oil properties.

Application of Demulsifiers

Application of pure demulsifiers as oilfield chemicals involves their injection down the hole or in batches on the manifold.

This helps in separation of water and other substances from the oil at the oilfields.

Water Soluble and Oil Soluble Demulsifiers

Water soluble demulsifiers are soluble in the emulsion and carries out the demulsification process in the soluble state.

Oil soluble demulsifiers can also dissolve in toluene and xylene and acts best when temperature is increased above certain degree.

What are Corrosion Inhibitors?

Corrosion Inhibitors are chemicals that change the corrosion rate of metals or their alloys.

They are helpful in that they can prevent metals from corrosion caused by oxygen, carbon dioxide and carbon dioxide.

Role of Corrosion Inhibitors in an Oilfield

Corrosion inhibitors are applied as oilfield chemicals to prevent metal equipment from corrosion damage, as might result when the metal surface is exposed to corrosive gases.

Water Soluble and Oil Soluble Inhibitors

Water soluble corrosive inhibitors are compounds that are soluble in water and are put in water to reach the steel surfaces.

They can also be used to protect corrosion of metals in transmission lines and separators.

Contact Us

Rimpro IndiaPlot No. 87, 88, 98, 99 & 100,

G.I.D.C., Gojaria, Ta. & Dist. Mehsana,

North Gujarat, India. Phone:- +91 - 2763 - 263242

Email: info@rimpro-india.com

Thank You

Rimpro India

www.rimpro-india.com