How to Create DB for NetAct and AircomEnterprise

How to Create an Oracle DB in Oracle Enterprise 8.1.7 for Netact or Aircom Enterprise

Page 1 of 13

Creating a DB for Netact or Aircom Enterprise Go to -Start -Oracle-OraHome817 -Database Administration -Database Configuration Assistant

Now it starts the Database Configuration Assistant

Next


Page 2 of 13

Select Custom and Next

Select OLTP and Next

Leave Default value 15 and Next


Page 3 of 13

Select Dedicated Server Mode and Next

Unselect all and Next


Page 4 of 13

Please select 8.1.0 for Compatible Parameter Set Global Database Name : For Nokia Netact - NETAC For Aircom Enterprise - ENTDB Please note that SID is automatically appears on the window. Then you have the following screen for password. Please type oracle for the password and confirm the password. (Password : oracle)


Page 5 of 13

Next

Leave default and Next


Page 6 of 13

For the each tab Unlimited must be checked. There are six tabs hee Please make sure that this is set correctly, otherwise there will be a problem when you entering data into your DB.

Next



Page 7 of 13





Page 8 of 13

Select Create database now and Finish

Click Yes to create the DB.

It takes immediately when you select Yes and the following screen appears.

. Creating DB takes 15-20 minutes.


Page 9 of 13

When the process finishes creating the DB, the following window appears.

Press OK and finalize creating a DB. You can go to - Control panel - Administrative Tools - Services And check if the service for your DB is up and running.


Page 10 of 13

Checking the TNS : If everything is OK, you can check the connection to your DB by using Net8 Configuration Assistant. Now you go to:

- Start - Programs - Oracle-OraHome817 - Network Administration - Net8 Configuration Assistant

Select the third one. Local Net Service Name Configuration.

Next


Page 11 of 13

Test and Next

Select the service name that you want to test. Please note that it is NETACT for Nokia-Netact and ENTDB for Aircom Enterprise. And Next


Page 12 of 13

When you first test it the following window appears:

Change Login and Type system & manager for username&mappsword.

And see that the action is successful.

Next


Page 13 of 13

See the screen above and finish the TNS checking. And finish the Net8 Configuration Assistant.

How to Create DB for NetAct and AircomEnterprise

Documents

Transcript of How to Create DB for NetAct and AircomEnterprise