How to Build a Dome Model i..
-
Upload
anonymous-onzjpz -
Category
Documents
-
view
227 -
download
0
Transcript of How to Build a Dome Model i..
-
7/31/2019 How to Build a Dome Model i..
1/4
-
7/31/2019 How to Build a Dome Model i..
2/4
Set theArc Radius to 10 feet. Set theArc Incrementsto 10 which will break up the
arc into 10 members.
4.
Make sure to select a Section Setbefore pressing OK.5.
With one arc created, the next step is to copy the arc.
Select the Copy Rotate tool.1.
Set theRotation Axis to Y.2.Set theRotation Angle to 22.5 degrees.3.
Set the # Incrementsto 1.4.
w to Build a Dome Model in RISA-3D RISA News http://02f50e9.netsolhost.com/WordPress/2010/09/howto-build-dome-...
4 10/6/2010 4:43 PM
-
7/31/2019 How to Build a Dome Model i..
3/4
Share |
Draw plates between the two rows of members.5.
Lastly, use the Copy Rotate tool to create the plates around the dome.
Rotate Angle = 360 degrees 22.5 degrees = 337.5 degrees
#Increments = 337.5 degrees / 22.5 degrees = 15 Increments
This entry was posted by RISA News on Tuesday, September 7th, 2010 at 11:00 am and
is filed under Technical Solutions. You can follow any responses to this entry through theRSS 2.0 feed. You can leave a response, or trackback from your own site.
w to Build a Dome Model in RISA-3D RISA News http://02f50e9.netsolhost.com/WordPress/2010/09/howto-build-dome-...
4 10/6/2010 4:43 PM
-
7/31/2019 How to Build a Dome Model i..
4/4
Contact RISA Technologies
Product and purchasing inquiries. Learn More
Whats ew
Latest on product upgrades and news from RISA Technologies. Learn More
Employment
Check here for opportunities to join our team. Learn More
w to Build a Dome Model in RISA-3D RISA News http://02f50e9.netsolhost.com/WordPress/2010/09/howto-build-dome-...
4 10/6/2010 4:43 PM