How do i resolve the

issue of Samsung

Error Code U1 2320?

How do i resolve the issue of Samsung Error

Code U1 2320?

Samsung is one of the top manufacturers of electronic productsincluding high-quality printers. Since after their launch, they havebecome a more popular choice among printer users as it maintainsquality and performance levels.

However, certain times the users get disappointed due to SamsungError Code U1 2320. This error is mainly related to fuser unit. So,whenever you face an issue, you must fix it at the earliest. This guidediscusses some of the potential causes for Samsung printer error codeU1 2320 and it's fixed that you can try on your own.

Methods to Fix Samsung Printer Error Code U1 2320-

One of the basic methods to resolve the error code without a delay. Firstly, turn offyour printer. Next, open the fuser unit to check it. Turn on your printer again andwait for some time to check if the error is still occurring or not.

This Samsung printer error code U1 2320 is not difficult to fix as you just need tofollow the same procedure as stated below.

Method 1: Soft Reset Samsung Printer

Method 2: Perform a Factory Restore

For this method, initially press the F8 key for some time and then tap on “Repair your computer.” Thereafter,click on Next option and select your username with a password.

Lastly, select “System Recovery” option and tap on OK. Press the back, power and home buttonsimultaneously. A message is shown on the screen asking you to press any key to continue the restoreprocess. As the restoration process gets completed, check if the error code is resolved or not.

Method 3: Check Fuser Unit

Another alternative to fix Samsung printer error code U1 2320. Firstly, turn off your printer and take out thefuser unit from it. Then, check whether the fuser connector is properly attached with your printer or not.

Next, test for the input voltage supply, whether it is normal or not. Also, check the thermistor. If it is faultythen replace it with a new one.

Method 4: Update Device Driver

An outdated driver restricts your Samsung printer from printing. So, it is important to update thedriver as soon as possible to get rid of the error. Do check whether the driver is corrupted or not.If yes, launch the Start menu and click on Search option. Next, type and enter “Device manager” whichopens a new page. Out of options given, select the appropriate option and click on the Update button.After the updates, restart your device.

Method 5: Check the Temperature of Fuser Unit:

Causes of Samsung Printer Error Code U1 2320-

When you are facing this Samsung printer error code U1 2320 then there must be underlying causesfor getting this. So, let us check them one by one.Old driver: Sometimes, you are using an old, outdated driver that's not compatible with your deviceso you face this issue with your printer.

Overheating of Fuser unit: As told, this error code is related to the damaged fuserunit. The Fuser unit is actually a removable part of the printer that should be timelyreplaced. The fuser is responsible to adjust the temperature quickly. So, if getsoverheated, then there is a high possibility of confronting this error code.

Virus or malware attacks: Certain times, your Samsung printer’ software getsaffected by a virus or malware. Subsequently, that restricts the printer to completethe printing job successfully and leading in a Samsung printer error code U1 2320.

In some of the cases, the fuser unit of your printer gets heated. So, it is possible thatyou face Samsung Printer Error Code u1 2320. Therefore, you must check theTemperature Control of the fuser unit. If the temperature is not moderate, then lowdown the temperature and check if the issue is resolved or not.

THANK YOU