Brother Printer is one of the most popular and globally acclaimed printer brandsbecause of its outstanding devices. But just as other printer brands, you mayexperience some issue in Brother Printer also. You may face some error messagesand codes on the LCDs while using Brother Printers. You must know the cause ofthe Brother Printer is in Error State and the methods to fix the issue. You musthave the answer of why is my Brother Printer in an error state before looking forany solution.

BIOS issues can also cause errors in your printers.Slow speed internet connectivity can let your printer in an error state.Improper wires and USBs setup of your printer.

Why is My Brother Printer in an error state?

There can be multiple reasons for your Brother Printer in error state. Some ofthe main causes are:

How to Solve Error State in BrotherPrinter in Windows 10?

Check the Printer Connection: Check the power cables and USB cablesconnected to the computer. Ensure that they are properly plugged in thesockets and check whether the issue is in the power cords.

Restart the Printer and Computer: Restart the Brother Printer and Computerafter shutting them down for a couple of minutes and then restart both ofthem. A simple restart can fix the problem of the Brother Printer error state.

Check Paper jams: Check if there is any stuck paper inside the printer tray. Ifany such paper is paper is found, remove it from the tray and use onlysupported papers.

From your Windows 10 system, click on the Windows button and then open theControl panel.Select the “View Devices and Printers” option from the “Hardware and Sound”section.Right-click on the printer device and then click on the “Set as default printer” option.Click on the printer option from the top-left corner and Untick Pause Printing andUse Printer OfflineNow restart your printer and check if the has been resolve or not.

When your Brother Printer does not print properly or has lost the connection for a longtime, it may go offline. So, first of all ensure that whether your printer is active or not.For this, you need to follow the steps given below:

If the error message still appears on the screen, then you can follow another solution.

Method 1: Check Brother Printer Online or Offline Status

Method 2: Restart Print Spooler Service

In your Windows search box, type CMD and then right-click to select “Run asadministrator.”Now click on the “Yes” button to allow a user control account.A new screen will appear, type net stop spooler and press the enter button.And once the printer spooler service has stopped, then start it again by typing net startspooler command followed by the enter key.You will receive the message displaying that the printer spooler service is successfullyturned on. Now, close cmd and start your printing.

Print spooler is used to manage printing tasks from computer to printer. It also carries the listof prints jobs completed successfully. Restarting the spooler can also help you to fix theBrother Printer in error state windows 10.

The above method is very beneficial for the Brother Printer in error state windows 10 issue.

Method 3: Enable PnP Detection

Type device manager in Windows 10 search box or type devmgmt.msc commandin the Run box and then click on the Enter button.Click on the visible tab appearing on the top and open Show hidden devices.After that, search Ports (COM and LPT) and click on it to expand the list.Right-click on ECP Printer Port (LPT1) and open Properties.Click on the Ports settings appearing next to the General Tab.Select Use any interrupt assigned to the port after that check on Enable legacyPlug and Play detectionClick on the OK button to save the changes.

If you are still worried about knowing the proper solution to remove my BrotherPrinter is in an error state issue. Then enabling the Legacy Plug and Play detectionmight help you in the same.

Alternative Fixes for Brother Printer Error State onWindows 10:

Update the Brother Printer Driver, either automatically or manually.Temporarily remove, and then reinstall the Brother Printer Driver onyour PCClear the spooler files an then restart itCheck the Brother Printer Offline status, and turn it online