HOVR BRACKET SYSTEM - Windsor Plywood®
15
HOVR BRACKET SYSTEM Floang Shelf Hardware Stronger, Safer, & Simple to Install (844) 574-2307 [email protected]
Transcript of HOVR BRACKET SYSTEM - Windsor Plywood®
HOVR BRACKET SYSTEMFloating Shelf Hardware
Stronger, Safer, & Simple to Install
(844) [email protected]
THE PROBLEM:
WEAK, UNSAFE, AND SAGGING FLOATING SHELVES AND STORAGE
hovrsolutions.com
THE PROBLEM:
1. WEAK & SAGGING FLOATING SHELVESThe current 2-prong industry standard has an average loadcapacity of 50lbs at a 10-inch depth. This causes uncertainty bythe customer & when building floating shelves.
2. POOR DESIGN
3. COMPLICATED HARDWARE
The current design of the hardware for floating shelving and othersolutions that is on the market today causes major weaknessesthat results in sag, slanting, or failure.
Many industry professionals use floating shelf hardware fromlarge distributors. They often require specialty hardware forproper installation & use. This is often complicated or expensive.
hovrsolutions.com
INTRODUCING:
THE HOVR BRACKET SYSTEM
THE NEW INDUSTRY STANDARD
hovrsolutions.com
Stronger, Safer, & Simple to Install
HOVR BRACKET SYSTEM: 1. 13x THE STRENGTH
The Hovr Bracket System has an average load capacity of 300lbsat a 10-inch depth. In comparison, the current industry standardhas an average load capacity of 50lbs.
2. SAFE & NO SAG OVER TIME
3. NO COMPLICATED HARDWARE
With the increased strength from the Hovr Bracket System, itallows for floating shelves to be secure and prevents sag overtime. It ultimately is the safest option for floating shelf hardware.
The Hovr Bracket System does not require any specialty hardwarefor use or installation. Any additional hardware that may berequired can be purchased affordable either on our website or atyour local home improvement store.
hovrsolutions.com
HOVR BRACKET VS. THE CURRENT INDUSTRY STANDARD
HOVR BRACKET SYSTEMIt uses a male and female bracket that interlock and screw together to form unparalleled strength. We use both aluminium extrusion and steel bend depending on what is required.
The current design of floating shelves and other floating solutions is designed with a 2-prong system. This design causes major weaknesses within the floating solution.
CURRENT INDUSTRY STANDARD
hovrsolutions.com
HOVR BRACKET VS. THE CURRENT INDUSTRY STANDARD
hovrsolutions.com
HOW IT WORKS
STEP 1
hovrsolutions.com
Male & Female BracketsOur system is based on having both a male and female bracket that interlock with one another. After installing the female bracket into the shelf, place the male bracket on the wall. The two will then “click” in and become one.
Set Screws or Epoxy GlueAt the bottom of the interlocked brackets is the set screw. This ensures there is no movement between the brackets and allows for maximum strength. You also have the option of not using the set screw & substituting with Epoxy glue to bind the brackets together.
Male Bracket Female Bracket
Shelf
HOW IT WORKS
STEP 2
hovrsolutions.com
Both Brackets Married Together
Shelf
Set Screws (if applicable)
HOW IT WORKS
STEP 3
hovrsolutions.com
Wall
ShelfBoth Hovr Brackets Together
PRODUCT DEMO
CLICK TO WATCH
hovrsolutions.com
Watch the product demo: demo.hovrsolutions.com
TECHNICAL INFORMATION> Height: 1.506 inches
> Depth: 0.904 inches
> Length: Standard length is 96 inches (customer to cut to desired length required)
> Mounting: Male bracket to the wall
> Color/Finish: Mat aluminium finish - non-coated
> Gauge/Material: 6063 T6 Aluminium
> Weight Capacity: 300lbs average
hovrsolutions.com
CUSTOMER QUESTIONS
WHAT LENGTH OF BRACKET IS REQUIRED?
hovrsolutions.com
Generally you will need a Hovr Bracket sized at one half of the linear foot length of the shelf you are installing (for example a 36 inch shelf will require a minimum of an 18 inch Hovr bracket) Certain installation requirements need to be met please click here to review the installation guide.
IS THIS ONLY FOR FLOATING SHELVES?
No: The Hovr Bracket System comes in two version the aluminium version and the steel bend version. Depending on what version you require for your next project our customers have floated shelves, vanities, fireplace mantels, concrete shelves, flower boxes, and the list goes on and on. Please contact Hovr Strong Solutions to discuss your customer design and let us help you on determining what version of the bracket would be best for your installation.
DOES HOVR PROVIDE SHELVING?
No: Hovr is a wholesale company and does not offer the shelv-ing with the bracket. However our Hovr Authorized Distribu-tors use the Hovr Bracket System exclusivity and can provide ready to go and custom designed shelving to fit every design and desire.
HOW TO ORDER
hovrsolutions.com
ORDER 2 x 4 FOOT LENGTH BRACKETS
Although we recommend all clients to being with ordering an Introductory Pack, you may go ahead and order the brackets directly.
Order Now
THANK YOU!HOVR STRONG SOLUTIONS INC.
Head office: #115 – 30600 Progressive Way, Abbotsford, BC, Canada V2T 6Z2
Website: hovrsolutions.com
BC: (604) 200-7736
Ontario: (647) 493-2553
Quebec: (450) 499-2028 (French)
Toll Free: (844) 574-2307
Email: [email protected]
hovrsolutions.com
Our Mission Statement:To provide and develop innovative hardware and installation solutions that are safe, strong, and simple, for each customer worldwide. While maintaining integrity, respect, and opportunity for the Hovr team in our global expansion efforts.
