HOSES - INTERNATIONAL SERIES - Interpump Hose HOSES – INTERNATIONAL SERIES Fi [LOW, MEDIUM AND...

A

HOSES - INTERNATIONAL SERIES

LOW, MEDIUM AND HIGH PRESSURE

A-1

HOSES – INTERNATIONAL SERIES [LOW, MEDIUM AND HIGH PRESSURE]

Low, Medium and High PressureSection A, Page: 2 3 4 5

TFSM013 TFDM4SH TFDM4SP TFSM012EN 856 EN 856 4SH EN 856 4SP EN 856

SAE 100R13 DIN 20023 4SH DIN 20023 4SP SAE 100R12

Section A, Page: 6 7 8 9 10

TFSM017 TFEM02K TFD0021 TFEM01K TFD0011SAE 100R17 EN 857 2SC EN 853 2SN EN 857 1SC EN 853 1SN

DIN 20022 DIN 20022

Section A, Page: 11 12 13 14

TFS0006 TFS0003 TFD03TE TFD02TEEN 854 - SAE 100R6 EN 854 EN 854 EN 854

1TE - UniLock SAE 100R3 3TE DIN 20021 2TE DIN 20021

Section A, Page: 15

TFS0005SAE 100R5

Suction Line Section A, Page: 16

TFS0004SAE 100R4Hy-Vacuum

SAE 100R5

Wire Spiral

Braids

SAE 100R4

Textile

NOTE: M in the 4th digit of hose part number denotes MSHA approval.

A-2

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]

HOSE AND CONNECTORS CATALOG

Applications :

Hose Specifications : Regulatory Approvals : Exceeds EN 856 SAE 100R13 - ISO 3862

Hose Construction :

Internal hose: Synthetic rubber, singular extrusion, uniform thickness Recommended fluid(s):Petroleum based hydraulic fluids,glycol-water based fluids andlubricants

Reinforcement: 4 high tensile steel wire spiral up to size 1"6 high tensile steel wire spiral from size 1¼" Operating temperature range:

-40 to +248°F (-40 to +120°C)+257°F intermittent (+125°C)

External covering: Anti-abrasive synthetic rubber, resistant to oils,fuels and atmospheric conditions

in size mm in bar psi bar psi mm in Kg/m lb/ftBFSM013-12 ¾ 12 32.1 1.264 350 5075 1920 27840 240 9.449 1.641 1.103 X Series 0009-12 **

TFSM013-16 1 16 38.7 1.524 350 5075 1660 24070 300 11.811 2.106 1.415 X Series 0013-16 ***

TFSM013-20 1¼ 20 49.7 1.957 350 5075 1520 22040 419 16.496 3.891 2.615 X Series 0013-20 ***

TFSM013-24 1 ½ 24 57.8 2.276 350 5075 1600 23200 508 20.000 5.210 3.501 X Series 0013-24 ***

TFSM013-32 2 32 71.5 2.815 350 5075 1500 21750 635 25.000 6.840 4.596 X Series 0013-32 ***

Additional Options: Antiabrasion version also available (Use order code: TFSP013)

Marking: Embossed branding also available (Use order code: TFSM013N)

FEATURES: Isobaric line 5000 psi - Approved up to 1,000,000 impulse cycles

Weight (approx)

2 - A

TFSM013 Hypress R13

Kg Fittings Series

2 pc (Ferrule)

*Notes: The standard packaging of this hose is on a plastic reel for ¾" ID, and in a tote box for 1" ID and above. To order ¾" ID hose in a tote box, replace the first letter of the part number with “T”.

Part Number*1 pcODID

◐●●●●

Max WP Min BP Min BR

** 0009 ferrule is external skive ferrule for use with standard inserts.

*** 0013 ferrule is external skive ferrule to be used with internal-external skive Interlock inserts.

Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

A-3


Applications :

Hose Specifications : Regulatory Approvals : Exceed EN 856 4SH - ISO 3862 4SH

Hose Construction :

Internal hose: Recommended fluid(s):Petroleum based hydraulic fluids,glycol-water based fluids and

Reinforcement: 4 hig stnacirbullarips eriw leets elisnet h

Operating temperature range:External covering: -40 to +212°F (-40° to 100°C)

+248°F intermittent (+120°C)


in size mm in bar psi bar psi mm in Kg/m lb/ft● BFDM4SH-12 ¾ 12 32.0 1.260 420 6090 1780 25810 210 8.268 1.572 1.057 X Series 004N-12 **

● TFDM4SH-16 1 16 38.4 1.512 385 5583 1750 25375 220 8.661 2.104 1.414 X Series 004N-16 **

● TFDM4SH-20 1¼ 20 45.8 1.803 350 5075 1400 20300 400 15.748 2.550 1.714 X Series 004N-20 **

● TFDM4SH-24 1½ 24 53.5 2.106 300 4350 1250 18125 560 22.047 3.225 2.167 X Series 004N-24 **

● TFDM4SH-32 2 32 68.0 2.677 250 3625 1000 14500 700 27.559 4.600 3.091 X Series 004N-32 **

Also available in a mining version (Use order code: THM04SHN)

Marking: Embossed branding also available (Use order code: TFDM4SHN)

FEATURES: Exceeds EN standard - Approved up to 1,000,000 impulse cycles

Kg

Available with steel plated braided sleeve version (Use order code: TFCM4SH) or stainless steelbraided sleeve version (Use order code: TFIM4SH)

Weight (approx)

Product suitable for MED Certification.

Fittings Series

2 pc (Ferrule)

*Notes: The standard packaging of this hose is on a plastic reel for ¾" ID, and in a tote box for 1" ID and above. To order ¾" ID hose in a tote box, replace the first letter of the part number with “T”.

TFDM4SH Hypress 4SH

Part Number* ID 1 pcOD

Synthetic rubber, singular extrusion, uniform thickness

Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions

Polish B certified.

** 004N ferrule is external skive ferrule for use with internal-external skive Interlock inserts.


A-4

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Regulatory Approval : Hose Specifications :

EN 856 4SP - ISO 3862 4SP

Hose Construction :


Reinforcement: 4 high tensile steel wire spiral lubricants

Operating temperature range:External covering: -40° to +212°F (-40° to 100°C)


OD Max WP Min BP Min BR Weight (approx) Ferrule

in mm mm bar psi bar psi mm inch Kg/m lb/ft Code

◐ BFDM4SP-04 ¼ 6.4 04 17.8 450 6525 1800 26100 150 5.906 0.592 0.398 0009-04 **

● BFDM4SP-06 ⅜ 9.5 06 21.2 445 6453 1780 25810 180 7.087 0.790 0.531 0009-06 **

● BFDM4SP-08 ½ 12.7 08 24.3 415 6018 1660 24070 230 9.055 0.940 0.632 0009-08 **

● BFDM4SP-10 ⅝ 16.0 10 28.0 350 5075 1400 20300 250 9.843 1.125 0.756 0009-10 **

● BFDM4SP-12 ¾ 19.0 12 32.0 350 5075 1400 20300 300 11.811 1.497 1.006 0009-12 **

● BFDM4SP-16 1 25.4 16 39.5 280 4060 1120 16240 340 13.386 2.150 1.445 BMC1-16 ***

● TFDM4SP-20 1¼ 31.8 20 50.8 210 3045 840 12180 460 18.110 3.157 2.122 BMC2-20 ***

◐ TFDM4SP-24 1½ 38.1 24 57.2 185 2683 740 10730 560 22.047 3.713 2.495 BMC2-24 ***

◐ TFDM4SP-32 2 50.8 32 69.8 165 2393 660 9570 660 25.984 4.870 3.273 0009-32 **

*Notes:

Additional Options :

Marking : Embossed branding also available (Use order code: TFDM4SPN)

Part Number*ID

size

TFDM4SP Hypress 4SP DMSP

Anti-abrasive synthetic rubber, resistanct to oils,fuels and atmospheric conditions


Available with steel plated braided sleeve version (Use order code: TFCM4SP)Available with stainless steel braided sleeve version (Use order code: TFIM4SP)

FEATURES: 4 high tensile steel spiral - high flexibility.

Kg

The standard packaging of this hose is on a plastic reel (up to 1" ID) and in a tote box (sizes over 1" ID). To order this hose in a tote box (up to 1" ID), replace the first letter of the part number with “T”.

** 0009 ferrule is external skive ferrule for use with standard inserts.

*** BMC ferrules are no-skive ferrules for use with standard inserts.


A-5


Regulatory Approvals : Hose Specifications : EN 856 SAE 100R12 - ISO 3862

Hose Construction :

Internal hose: Synthetic rubber, singular extrusion,uniform thickness

Recommended fluid(s):Petroleum based hydraulic fluids,glycol-water based fluids and

Reinforcement: 4 high tensile steel wire spiral

Operating temperature range:External covering: -40 to +248°F (-40 to +120°C)



in size mm in bar psi bar psi mm in Kg/m lb/ft○ BFSM012-06 ⅜ 06 20.2 0.795 280 4060 1580 22910 95 3.740 0.717 0.482 0009-06 ***

◐ BFSM012-08 ½ 08 23.8 0.937 280 4060 1400 20300 110 4.331 0.881 0.592 0009-08 ***

◐ BFSM012-10 ⅝ 10 27.4 1.079 280 4060 1300 18850 130 5.118 1.049 0.705 0009-10 ***

● BFSM012-12 ¾ 12 30.6 1.205 280 4060 1300 18850 145 5.709 1.222 0.821 BMC1-12 ****

● BFSM012-16 1 16 37.9 1.492 280 4060 1200 17400 210 8.268 1.795 1.207 BMC1-16 ****

◐ TFSM012-20 1 ¼ 20 47.5 1.870 210 3045 1000 14500 240 9.449 2.780 1.868 BMC2-20 ****

◐ TFSM012-24 1 ½ 24 53.8 2.118 176 2552 1000 14500 480 18.898 3.230 2.171 BMC2-24 ****

○ TFSM012-32 2 32 67.0 2.638 176 2552 850 12325 600 23.622 4.290 2.883 004H-32 *****

Marking : Embossed branding also available (Use order code: TFSM012N)

TFSM012 Hypress R12

Part Number*Kg

1 pc

Fittings Series

2 pc (Ferrule)


FEATURES: High flexibility - No -skive solution - Above standard pressure resistance

ID Weight (approx)OD

*Note: The standard packaging of this hose is on a plastic reel (up to 1" ID) and in a tote box (sizes over 1" ID). To order this hose in a tote box (up to 1" ID), replace the first letter of the part number with “T”. ** Contact our technical department

*** 0009 ferrule is external skive ferrule for use with standard inserts

**** BMC ferrule is no-skive ferrule for use with standard inserts

***** 004H ferrule is external skive ferrule for use with standard inserts

Applications :

**

**

**

**

**

**

**

**


A-6

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Regulatory Approvals : Hose Specifications : SAE 100R17 - SAE J517 - ISO 11237/1

Hose Construction : Recommended fluid(s):Petroleum based hydraulic fluids,

Internal hose: glycol-water based fluids andlubricants.

Operating temperature range:Reinforcement: -40° to +212°F (-40 to +100°C)


External covering:


in size mm in bar psi bar psi mm in Kg/m lb/ft○ BFSM017-04 ¼ 04 12.3 0.484 210 3045 840 12180 50 1.969 0.185 0.124 G Series 001C-04

◐ BFSM017-06 ⅜ 06 15.7 0.618 210 3045 840 12180 65 2.559 0.256 0.172 G Series 001C-06

◐ BFSM017-08 ½ 08 19.4 0.764 210 3045 840 12180 90 3.543 0.378 0.254 G Series 001C-08

○ BFSM017-10 ⅝ 10 23.5 0.925 210 3045 840 12180 105 4.134 0.624 0.419 G Series 001C-10

○ BFSM017-12 ¾ 12 27.6 1.087 210 3045 840 12180 125 4.921 0.764 0.513 G Series 001C-12

○ BFSM017-16 1 16 36.2 1.425 210 3045 840 12180 150 5.906 1.233 0.829 G Series 001C-16

Marking : Embossed branding version also available (Use order code: TFSM017N)

Hypress R17

High tensile steel. 1-braid up to size ½",2-braid from size ⅝" and larger

Part Number*1 pc

Weight (approx)

Fitting Series

2 pc (Ferrule)

TFSM017

ID

Synthetic rubber, singular extrusion, uniformthickness


OD

5 - A

FEATURE: Isobaric line 3000 psi - No-skive compact hose

*Note: The standard packaging of this hose is on a plastic reel (up to 1" ID) and in a tote box (sizes over 1" ID). To order this hose in a tote box (up to 1" ID), replace the first letter of the part number with “T”.

Kg


A-7


Applications :

Regulatory Approvals : Hose Specifications : EN 857 2SC - exceed SAE 100R16

Hose Construction : Recommended fluid(s):

Internal hose: Petroleum based hydraulic fluids,glycol-water based fluids andlubricants

Reinforcement: Two high tensile steel wire braidsOperating temperature range:-40 to +212°F (-40 to +100°C)

External covering: +248°F intermittent (+120°C)


in size mm in bar psi bar psi mm in Kg/m lb/ft● BFEM02K-04 ¼ 04 13.3 0.524 400 5800 1600 23200 50 1.969 0.281 0.189 G Series 001C-04

● BFEM02K-06 ⅜ 06 17.1 0.673 330 4785 1320 19140 65 2.559 0.418 0.281 G Series 001C-06

● BFEM02K-08 ½ 08 20.4 0.803 275 3988 1100 15950 90 3.543 0.525 0.353 G Series 001C-08

● BFEM02K-10 ⅝ 10 23.5 0.925 250 3625 1000 14500 100 3.937 0.627 0.421 G Series 001C-10

● BFEM02K-12 ¾ 12 27.6 1.087 215 3118 860 12470 120 4.724 0.782 0.526 G Series 001C-12

◐ BFEM02K-16 1 16 35.8 1.409 165 2393 660 9570 150 5.906 1.176 0.790 G Series 001C-16

Marking : Embossed branding version also available (Use order code: TFEM02KN)

TFEM02K


6 - A

FEATURE: Compact hose with low bend radius (R16) - No-skive solution

Part Number* ID OD Weight (approx)


1 pc

Hypress 2SC


Fittings Series

2 pc (Ferrule)

Kg


A-8

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Regulatory Approvals : Hose Specifications : DIN EN 853 2SN - DIN 20022

- exceeds SAE 100R2AT

Hose Construction :


Reinforcement: Two high tensile steel wire braids lubricants

Operating temperature range:-40° to +212°F (-40° to 100°C)




○ BFD0021-03 4.8 03 13.5 415 6018 1650 23925 90 3.543 0.317 0.213 0022-03

● BFD0021-04 ¼ 6.4 04 15.0 400 5800 1600 23200 100 3.937 0.360 0.242 0022-04

● BFD0021-05 5⁄16 8.0 05 16.6 350 5075 1400 20300 115 4.528 0.416 0.280 0022-05

● BFD0021-06 ⅜ 9.5 06 19.0 330 4800 1320 19140 130 5.118 0.525 0.353 0022-06

● BFD0021-08 ½ 12.7 08 22.2 275 3988 1100 15950 180 7.087 0.620 0.417 0022-08

● BFD0021-10 ⅝ 16.0 10 25.4 250 3600 1000 14500 200 7.874 0.752 0.505 0022-10

● BFD0021-12 ¾ 19.0 12 29.3 215 3118 850 12325 240 9.449 0.923 0.620 0022-12

● BFD0021-16 1 25.4 16 38.1 165 2393 650 9425 300 11.811 1.377 0.925 0022-16

● TFD0021-20 1¼ 31.8 20 48.3 125 1813 500 7250 420 16.535 2.035 1.368 0022-20

● TFD0021-24 1½ 38.1 24 54.6 90 1305 360 5220 500 19.685 2.300 1.546 0022-24

● TFD0021-32 2 50.8 32 66.9 80 1160 320 4640 630 24.803 3.160 2.124 0022-32

*Note:

Additional Options:

Marking: Embossed layline version available (Use order code: TFD0021N)


Hypress 2SN

Part Number*

TFD0021 D02N

Steel plated braided sleeve version (Use order code: TFC0021)Stainless steel braided sleeve version (Use order code: TFI0021)

abrasion resistance - High Ozone resistance


IDsize


Kg

3⁄16

FEATURE: No-skive hose - Exceeds EN specifications - Impulse tested up to double EN requirements - High

A-9


Applications :

Hose Specifications : Regulatory Approvals : Exceeds DIN EN 857 1SC - ISO 11237

Internal hose:Recommended fluid(s):Petroleum based hydraulic fluids,glycol-water based fluids and

Reinforcement: 1 hig stnacirbuldiarb eriw leets elisnet h

Operating temperature range:-40° to +212°F (-40° to +100°C)



in size mm in bar psi bar psi mm in Kg/m lb/ft● BFEM01K-04 ¼ 04 12.3 0.484 225 3263 900 13050 50 1.969 0.182 0.122 G Series 001C-04

○ BFEM01K-05 05 13.5 0.531 210 3045 840 12180 55 2.165 0.203 0.136 G Series 001C-05

◐ BFEM01K-06 ⅜ 06 15.7 0.618 180 2610 720 10440 60 2.362 0.248 0.167 G Series 001C-06

◐ BFEM01K-08 ½ 08 18.9 0.744 160 2320 640 9280 70 2.756 0.341 0.229 G Series 001C-08

○ BFEM01K-10 ⅝ 10 22.4 0.882 130 1885 520 7540 90 3.543 0.421 0.283 G Series 001C-10

◐ BFEM01K-12 ¾ 12 25.9 1.020 105 1523 420 6090 100 3.937 0.492 0.330 G Series 001C-12

○ BFEM01K-16 1 16 33.7 1.327 88 1276 352 5104 180 7.087 0.742 0.499 G Series 001C-16

Marking : Embossed branding version also available (Use order code: TFEM01KN)

TFEM01K Hypress 1SC

FEATURE: No-skive hose - Exceeds EN specifications - Impulse tested up to double EN requirements.



OD Weight (approx) 1 pc

Part Number* ID

Fitting Series

2 pc (Ferrule)


5⁄16

Kg

A-10

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Hose Specifications : Regulatory Approvals : Exceeds DIN EN 853 1SN

Hose Construction :

Internal hose: Recommended fluid:Petroleum based hydraulic fluids,glycol-water based fluids and

Reinforcement: 1 steel wire braid lubricants

External covering:Operating temperature range:-40° to +212°F (-40° to 100°C)+248°F intermittent (+120°C)



● TFD0011-03 4.8 03 11.8 250 3625 1000 14500 90 3.543 0.184 0.124 001C-03

● TFD0011-04 ¼ 6.4 04 13.4 225 3263 900 13050 100 3.937 0.231 0.155 001C-04

● TFD0011-05 8.0 05 15.0 215 3118 850 12325 115 4.528 0.254 0.171 001C-05

● TFD0011-06 ⅜ 9.5 06 17.4 180 2610 720 10440 130 5.118 0.338 0.227 001C-06

● TFD0011-08 ½ 12.7 08 20.6 160 2320 640 9280 180 7.087 0.415 0.279 001C-08

◐ TFD0011-10 ⅝ 16.0 10 23.7 130 1885 520 7540 200 7.874 0.477 0.321 001C-10

● TFD0011-12 ¾ 19.0 12 27.7 105 1523 420 6090 240 9.449 0.618 0.415 001C-12

● TFD0011-16 1 25.4 16 35.6 88 1276 350 5075 300 11.811 0.901 0.605 001C-16

● TFD0011-20 1¼ 31.8 20 43.5 63 915 250 3625 420 16.535 1.270 0.853 001C-20

● TFD0011-24 1½ 38.1 24 50.8 50 725 200 2900 500 19.685 1.596 1.073 001C-24

● TFD0011-32 2 50.8 32 63.6 40 580 160 2320 630 24.803 2.200 1.478 001C-32

*Note :

Additional Options :

Marking : Also available with an embossed layline (Use order code: TFD0011N)

FEATURE: No-skive hose - Exceeds EN specifications - Impulse tested up to double EN requirements

D01NTFD0011 Hypress 1SN

Synthetic rubber, extruded whole without joints, ofuniform thickness


Part Number*ID

size

Available with steel plated braided sleeve version (Use order code: TFC0011) or stainless steel braided sleeve version (Use order code: TFI0011)


Kg

5⁄16

3⁄16

A-11


SAE 100R6 - EN 854 1TE

Internal hose: Oil resistant synthetic rubber Petroleum based hydraulic fluids,glycol-water based fluids andlubricants

Reinforcement: 1 textile braid

-40° to +212°F (-40° to 100°C)+158°F for water based fluids (+70°C)

External covering: Synthetic rubber, resistant to oils, fuels and atmospheric conditions

Code

30-7000760.0990.0969.105394437.01

12.3 28 406 18 261 65 2.559 0.100 0.067 0007-04

13.9 28 406 *** - on request 80 3.150 0.125 0.084 0007-05

15.5 28 406 18 261 80 3.150 0.150 0.101 0007-06

19.0 28 406 15 218 100 3.937 0.200 0.134 0007-08

01-7000861.0052.0129.4521843426.22

25.8 21 305 15 218 150 5.906 0.300 0.202 0007-12

33.2 9 131 12 174 170 6.693 0.450 0.302 0007-16 **

Safety Factor 4:1

Ink layline only available in white

Easy assembly – no tools or clamps required

UniLock

ATTENTION: Do not use Unilock fittings for brake lines with compressed air or in circuits under strong pressure impulses.

** not included in SAE standard

UniLock


- -

- -

BFS0006-03BFS0006-04BFS0006-04BFS0006-05BFS0006-08BFS0006-10BFS0006-12BFS0006-16

Fitting series

TFS0006

SAE 100R6 - EN 854 1TE


Reinforcement: 1 textile braid

-40° to +212°F (-40° to 100°C)+158°F for water based fluids (+70°C)

External covering: Synthetic rubber, resistant to oils, fuels and atmospheric conditions

Code

30-7000760.0990.0969.105394437.01

12.3 28 406 18 261 65 2.559 0.100 0.067 0007-04

13.9 28 406 *** - on request 80 3.150 0.125 0.084 0007-05

15.5 28 406 18 261 80 3.150 0.150 0.101 0007-06

19.0 28 406 15 218 100 3.937 0.200 0.134 0007-08

01-7000861.0052.0129.4521843426.22

25.8 21 305 15 218 150 5.906 0.300 0.202 0007-12

33.2 9 131 12 174 170 6.693 0.450 0.302 0007-16 **

Safety Factor 4:1

Ink layline only available in white

Easy assembly – no tools or clamps required

UniLock

ATTENTION: Do not use Unilock fittings for brake lines with compressed air or in circuits under strong pressure impulses.


UniLock


- -

- -

BFS0006-03BFS0006-04BFS0006-04BFS0006-05BFS0006-08BFS0006-10BFS0006-12BFS0006-16

Fitting series

TFS0006

HYPRESS UniLock EN854 1TE/SAE 100R6 - ∅ 1/4" - DN6 - W.P. 28 BAR / 400 PSI

A-12

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Hose Specifications : EN854 SAE 100R3

Hose Construction :

Internal hose: Oil resistant synthetic rubber Recommended fluid:Petroleum based hydraulic fluids,glycol-water based fluids and

Reinforcement: 2 textile braids lubricants

External covering: Operating temperature range:-40° to +212°F continuous (-40° to 100°C)+158°F for water based fluids (+70°C)



○ BFS0003-03 4.8 03 12.7 103 1494 412 5974 76 2.992 0.129 0.087 0003-03

○ BFS0003-04 ¼ 6.4 04 14.3 86 1247 344 4988 80 3.150 0.160 0.108 0003-04

○ BFS0003-05 8.0 05 17.5 83 1204 332 4814 102 4.016 0.250 0.168 0003-05

○ BFS0003-06 ⅜ 9.5 06 19.1 78 1131 312 4524 102 4.016 0.280 0.188 0003-06

○ BFS0003-08 ½ 12.7 08 23.8 69 1001 276 4002 127 5.000 0.410 0.276 0003-08

○ BFS0003-10 ⅝ 16.0 10 27.0 60 870 240 3480 140 5.512 0.470 0.316 0003-10

○ BFS0003-12 ¾ 19.0 12 31.8 52 754 208 3016 152 5.984 0.650 0.437 0003-12

○ BFS0003-16 1 25.4 16 38.1 39 566 156 2262 203 7.992 0.830 0.558 0003-16

○ BFS0003-20 1 ¼ 31.8 20 44.5 26 377 104 1508 254 10.000 1.000 0.672 0003-20

*Note:

Part Number*ID

size

Synthetic rubber, resistant to oils, fuels and atmospheric conditions

The standard packaging of this hose is on a plastic reel (up to 1" ID) and in a tote box (sizes over 1" ID). To order this hose in a tote box (up to 1" ID), replace the first letter of the part number with "T".

S003TFS0003 Hypress R3

5⁄16

3⁄16

Kg

A-13


Applications :

Hose Specifications : EN 854 3TE - DIN 20021

Hose Construction : Recommended fluid:


Reinforcement: 2 textile braids

External covering: Operating temperature range:-40° to +212°F continuous (-40° to 100°C)+158°F for water based fluids (+70°C)



○ TFD03TE-03 4.8 03 12.8 160 2320 640 9280 40 1.575 0.200 0.134 0003-03

○ TFD03TE-04 ¼ 6.4 04 14.4 145 2103 580 8410 45 1.772 0.180 0.121 0003-04

○ TFD03TE-05 8.0 05 16.9 130 1885 520 7540 55 2.165 0.240 0.161 0003-05

○ TFD03TE-06 ⅜ 9.5 06 18.5 110 1595 440 6380 70 2.756 0.260 0.175 0003-06

○ TFD03TE-08 ½ 12.7 08 21.7 93 1349 372 5394 85 3.346 0.330 0.222 0003-08

○ TFD03TE-10 ⅝ 16.0 10 25.9 80 1160 320 4640 105 4.134 0.440 0.296 0003-10

○ TFD03TE-12 ¾ 19.0 12 29.0 70 1015 280 4060 130 5.118 0.490 0.329 0003-12

○ TFD03TE-16 1 25.4 16 35.9 55 798 220 3190 150 5.906 0.670 0.450 0003-16

○ TFD03TE-20 1¼ 31.8 20 42.3 45 653 180 2610 190 7.480 0.830 0.558 0003-20

○ TFD03TE-24 1½ 38.1 24 49.6 40 580 160 2320 240 9.449 1.050 0.706 0003-24

○ TFD03TE-32 2 50.8 32 62.3 33 479 132 1914 300 11.811 0.200 0.134 **

*Note :

** Ask our Technical Department

D03ETFD03TE Hypress 3TE


Part Number*ID

size

The standard packaging of this hose is in a tote box. To order hose on a plastic reel (up to 1” ID),replace the first letter of the part number with “B”.

Kg

5⁄16

3⁄16

A-14

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

Hose Specifications : EN 854 2TE - DIN 20021

Hose Construction :

Recommended fluid:Internal hose: Oil resistant synthetic rubber Petroleum based hydraulic fluids,

glycol-water based fluids andlubricants

Reinforcement: 2 textile braids

Operating temperature range:External covering: -40° to +212°F continuous (-40° to 100°C)

+158°F for water based fluids (+70°C)



○ TFD02TE-03 4.8 03 11.8 80 1160 320 4640 35 1.378 0.200 0.134 0007-03

○ TFD02TE-04 ¼ 6.4 04 13.4 75 1088 300 4350 40 1.575 0.150 0.101 0007-04

○ TFD02TE-05 8.0 05 14.9 68 986 272 3944 50 1.969 0.170 0.114 0007-05

○ TFD02TE-06 ⅜ 9.5 06 16.5 63 914 252 3654 60 2.362 0.185 0.124 0007-06

○ TFD02TE-08 ½ 12.7 08 19.7 58 841 232 3364 70 2.756 0.240 0.161 0007-08

○ TFD02TE-10 ⅝ 16.0 10 23.9 50 725 200 2900 90 3.543 0.320 0.215 0007-10

○ TFD02TE-12 ¾ 19.0 12 27.0 45 653 180 2610 110 4.331 0.380 0.255 0007-12

○ TFD02TE-16 1 25.4 16 34.4 40 580 160 2320 150 5.906 0.550 0.370 0007-16

*Note : The standard packaging of this hose is in a tote box. To order hose on a plastic reel (up to 1" ID), replace the first letter of the part number with “B”.

TFD02TE Hypress 2TE D02E

16 - A

Part Number*ID

size

Kg


3⁄16

5⁄16

A-15


Application:

Hose Specifications : Regulatory Approvals : SAE 100R5





** Ask our Technical Dept.



TFS0005-04 4.8 04 13.2 210 3045 840 12180 75 2.953 0.190 0.128 0003-03

TFS0005-05 ¼ 6.4 05 14.8 210 3045 840 12180 85 3.346 0.224 0.151 0003-04

TFS0005-06 7.9 06 17.2 157 2277 628 9106 100 3.937 0.283 0.190 0003-05

TFS0005-08 10.3 08 19.5 140 2030 560 8120 115 4.528 0.350 0.235 0003-06

TFS0005-10 ½ 12.7 10 23.4 122 1769 488 7076 140 5.512 0.473 0.318 0003-08

TFS0005-12 15.9 12 27.4 105 1523 420 6090 165 6.496 0.617 0.415 0003-10

TFS0005-16 22.2 16 31.4 56 812 224 3248 185 7.283 0.570 0.383 0003-12

TFS0005-20 28.6 20 38.1 43 624 172 2494 230 9.055 0.795 0.534 **

TFS0005-24 34.9 24 44.5 35 508 140 2030 265 10.433 1.020 0.685 **

TFS0005-32 1 46.0 32 56.4 24 348 96 1392 335 13.189 1.420 0.954 **

*** - SAE Dash Size is the same as the OD of tubing having approximately the same ID as the hose, expressed in 1⁄16’s of an inch.

Marking: Ink layline only available in white

HYPRESS SAE 100 - R5 DN 16 I.D.5/8" W.P. 105 BAR/1523 PSI

S005

Textile braided cover

TFS0005 Hypress R5

Synthetic rubber, extruded whole without joints, of uniform thickness

Part Number*ID SAE

size***

FEATURE: Wear-resistant textile braid cover - No-skive solution available

*Notes: The standard packaging of this hose is on a plastic reel (up to 1" ID) and in a tote box (sizes over 1" ID). To order this hose in a tote box (up to 1" ID), replace the first letter of the part number with “T”.

Kg

5⁄16

3⁄16

13⁄16

13⁄16

⅜1

⅛1

Application:

Hose Specifications : Regulatory Approvals : SAE 100R5





** Ask our Technical Dept.



TFS0005-04 4.8 04 13.2 210 3045 840 12180 75 2.953 0.190 0.128 0003-03

TFS0005-05 ¼ 6.4 05 14.8 210 3045 840 12180 85 3.346 0.224 0.151 0003-04

TFS0005-06 7.9 06 17.2 157 2277 628 9106 100 3.937 0.283 0.190 0003-05

TFS0005-08 10.3 08 19.5 140 2030 560 8120 115 4.528 0.350 0.235 0003-06

TFS0005-10 ½ 12.7 10 23.4 122 1769 488 7076 140 5.512 0.473 0.318 0003-08

TFS0005-12 15.9 12 27.4 105 1523 420 6090 165 6.496 0.617 0.415 0003-10

TFS0005-16 22.2 16 31.4 56 812 224 3248 185 7.283 0.570 0.383 0003-12

TFS0005-20 28.6 20 38.1 43 624 172 2494 230 9.055 0.795 0.534 **

TFS0005-24 34.9 24 44.5 35 508 140 2030 265 10.433 1.020 0.685 **

TFS0005-32 1 46.0 32 56.4 24 348 96 1392 335 13.189 1.420 0.954 **

*** - SAE Dash Size is the same as the OD of tubing having approximately the same ID as the hose, expressed in 1⁄16’s of an inch.

Marking: Ink layline only available in white

HYPRESS SAE 100 - R5 DN 16 I.D.5/8" W.P. 105 BAR/1523 PSI

S005

Textile braided cover

TFS0005 Hypress R5

Synthetic rubber, extruded whole without joints, of uniform thickness

Part Number*ID SAE

size***

FEATURE: Wear-resistant textile braid cover - No-skive solution available


Kg

5⁄16

3⁄16

13⁄16

13⁄16

⅜1

⅛1

HYPRESS SAE 100R5 DN16 I.D. 5/8" W.P. 105 BAR/1523 PSI

A-16

HO

SES – INTER

NA

TION

AL SER

IES [LOW

, ME

DIU

M A

ND

HIG

H PR

ESSU

RE ]


Applications :

SAE 100R4

Recommended fluid(s):Internal hose: Oil resistant synthetic rubber Petroleum based hydraulic fluids,

glycol-water based fluids andlubricants

Reinforcement: 2 textile braids + 1 spiral braidOperating temperature range:-40° to +212°F continuous (-40° to +100°C)+158°F for water based fluids (+70°C)

External covering:


in size** mm in bar psi bar psi mm in Kg/m lb/ft○ BFS0004-10 ⅝ 10 26.0 1.024 10 145 30 435 95 3.740 0.470 0.316 *** **◐ BFS0004-12 ¾ 12 32.0 1.260 21 305 83 1204 125 4.921 0.550 0.370 ***

◐ BFS0004-16 1 16 38.0 1.496 17 247 69 1001 150 5.906 0.740 0.497 ***

○ TFS0004-19 13⁄16 19 42.0 1.654 16 232 65 943 190 7.480 0.860 0.578 *** **◐ TFS0004-20 1¼ 20 45.0 1.772 14 203 55 798 200 7.874 0.900 0.605 ***

○ TFS0004-22 1⅜ 22 47.0 1.850 12 174 50 725 240 9.449 1.010 0.679 *** **○ TFS0004-24 1½ 24 52.0 2.047 10 145 41 595 255 10.039 1.080 0.726 ***

○ TFS0004-25 19⁄16 25 52.0 2.047 10 145 41 595 260 10.236 1.260 0.847 *** **○ TFS0004-28 1¾ 28 58.0 2.283 8 116 30 435 270 10.630 1.410 0.948 *** **◐ TFS0004-32 2 32 64.0 2.520 7 102 28 406 300 11.811 1.560 1.048 ***

○ TFS0004-38 2⅜ 38 74.0 2.913 5 73 22 319 350 13.780 1.880 1.263 *** **○ TFS0004-40 2½ 40 77.0 3.031 4 58 17 247 355 13.976 2.080 1.398 ***

○ TFS0004-44 2¾ 44 85.0 3.346 4 58 17 247 430 16.929 2.280 1.532 *** **○ TFS0004-48 3 48 90.0 3.543 4 58 15 218 460 18.110 2.820 1.895 ***

○ TFS0004-50 3⅛ 50 95.0 3.740 4 58 15 218 490 19.291 2.620 1.761 *** **○ TFS0004-56 3½ 56 103.0 4.055 4 58 15 218 530 20.866 3.850 2.587 ***

○ TFS0004-64 4 64 116.0 4.567 3 36 12 174 610 24.016 4.500 3.024 ***


*** Contact our Technical Dept.

Marking: Available only with a “mylar” layline

Additional Options:

Fittings Series

TFS0004 HY-VACUUM - SAE 100R4

Synthetic rubber; resistant to oils, fuels and atmospheric conditions

Part Number* ID Weight (approx)OD

Steel plated, braided sleeve version (Use order code: TFC0004) or stainless steel braided sleeve version (Use order code: TFI0004) also available


FEATURE: Vacuum-resistant according to SAE 100R4 specifications

Hose Specifications:

Kg

HOSES - INTERNATIONAL SERIES - Interpump Hose HOSES – INTERNATIONAL SERIES Fi [LOW, MEDIUM AND...

Documents

Transcript of HOSES - INTERNATIONAL SERIES - Interpump Hose HOSES – INTERNATIONAL SERIES Fi [LOW, MEDIUM AND...