Shredding

HORIZONTAL WASTE SHREDDERS

VH Series

The Ultimate Shredders for Lineal Scrap

The Vecoplan VH Series horizontal shredders, or wood grinders as this industry has come to know them, are designed especially for size reduction of wood strips, edge rippings, slabs, and all long wood scrap, as well as lineal plastic scrap such as siding and vinyl window profiles.

The VH-Series™ family contains six different models, ranging from 40 HP to 125 HP. Infeed widths range from 14” to 50”. Larger custom models are available in some styles. Each machine comes complete with a pre-wired control panel and 16’ vibration conveyor for infeed of the feedstock. Multiple feed rollers grip material coming from the conveyor and advance the material into the cutting rotor. The feed rate is determined by the amperage load that processing places on the cutting rotor, which in turn sends a signal to both the conveyor and the feed rollers for adjustment of the feed rate. Particle size, or chip size, is determined by changeable sizing screens similar to Vecoplan’s vertical shredders.

Vecoplan VH Series Horizontal Waste Shredders

More OptionsThe VH-Series™ Horizontal Shredders are available with optional cutting rotor designs. Five of the six shredder models are available with a precision granulator or drum chipper rotor in 2-4-knife configurations in a moderately open design. The knife rotor turns at moderate RPM and utilizes sharp knives similar to conventional granulator or chipper blades. A unique clamping system secures the knives in place and affords many sharpening intervals. When a small and uniform granulate or chip is needed, the knife rotor is suggested. If a larger and rougher particle size is acceptable, the VH-Series™ models are supplied with the patented TorsionPoint™ “U”-Rotor™. Vecoplan has used this rotor in its vertical shredders since 1983 and is the preferred shredding method used in industry today. In the wood industry, Vecoplan has been producing high quality drum chippers since 1969.

While durability and extremely low maintenance are highly valuable benefits of the VH-Series™, they pale in comparison to the performance it delivers. The unique design and resulting efficiencies contribute to both a lower purchase price and lower subsequent operating costs.

•LowtoMediumSpeed/HighTorqueDesign•EasyAccessibility•Equity“Buyback”Guarantee•4-Way,IndexableCuttingInserts•HighOutput“TorsionPoint”CuttingRotor•SevereDutyConstruction•LifetimeLimitedWarrantyonCuttingRotor•OversizedDrivetrain•PowerbeltRotorDrive•HeavySphericalRollerBearings•ISO9001Manufactured

More Features

Unique infeed roller designs available, such as theaboveVH-18PaperCoreShredder,designedspecifically for size reduction of paper cores.

Vecoplan’s TorsionPoint™“U” RotorDeveloped and Patented by VecoplanThe industry’s most successful cutting rotor design.

The cutting rotor has been engineered for durability and carries a Limited Lifetime Warranty.

Rotors are available in several diameters dependent on throughput requirements.

Pneumatic DischargeEfficiently evacuates processed material from the shredder.

Changeable Sizing ScreensSizing screens from 3/8” to 3” add economical production of consistent sized particles in one pass.

16’ Vibratory Infeed ConveyorComes standard with every horizontal model.No conveyor belt to wear out or replace.

Multiple Infeed MotorsPowerful, independent infeed motors insure correct feeding of material to the cutting rotor.

Easy AccessTo cuttings inserts and screens for easy maintenance.

Floating Infeed ChamberAutomatically adjusts for various material height and maintains positive feed to the cutting rotor.

Safety InterlocksProvides maximum safety when inspecting or maintaining the cutting chamber.

Oversized Drive MotorPowerful main drive motors make sure that there’s power to spare.

Feed Limit SwitchMonitors material to insure the most efficient feeding of material.

Dual Torque ArmsTorque arms with disc springs to“shock absorb” gearbox.

Equipped with a “shut down”switch to limit damage from tramp metal.

H

Multiple Infeed RollersIndividually powered infeed rollers maintain correct feeding of material to the cutting rotor.

Heavy Duty Roller BearingsProvide better wear characteristicsand longer life thanflange mountedball bearings.

4-Sided Cutting InsertsVecoplan “Torsion Point” cutters are4 sided and indexable providing4 actual cutting surfaces.

Denotes A VecoplanExclusive

H

Details: VH-14/40CW/P VH-18CW/P VH-22CW/P

InfeedOpening 14”x3.5” 18”x5” 22”x6”

RotorDiameter 12” 16” 20”

NumberofCutters 18(40mmx40mm) 24(40mmx40mm) 30(40mmx40mm)

Rotor Speed 390 rpm 390 rpm 390 rpm

DriveMotorHP 40HP 50-60HP 60-100HP

Weight 2,205 lbs 4,189 lbs 6,393 lbs

Voltage 460V/3Ph/60Hz 460V/3Ph/60Hz 460V/3Ph/60Hz

InfeedConveyor 16Ft.Vibratory 16Ft.Vibratory 16Ft.Vibratory

FeedRollers 2(1Top,1Bottom) 2(1Top,1Bottom) 2(1Top,1Bottom)

Vecoplan VH Horizontal Shredders

TheVecoplanVH-14/40CW/Pisdesignedtoshredvirtuallyanylineal,wood or plastic, scrap. With a 14”x 3.5” infeed opening, it comes standard with a 16’ vibratory infeed conveyor and easily processes wood strips, edge rippings, slabs, or any long wood scrap, as well as PVCsiding,windowprofiles,plasticandcompositelumber,orotherlineal plastic scrap.

VH-18 CW/PDesignedforthesizereductionoflongwoodorplasticwaste,theVH-18CW/P’sstandarddesignfeaturesan18”x 5” infeed opening, a continuous feed16’ vibratory conveyor and is perfect for shredding lineal wood and plastic scrap including rippings, slabs, strips, mouldings, siding, profiles, and composite lumber.

VH-22 CW/PWith its 22”x 6” infeed opening, fed by its standard 16’ vibratory conveyor,theVH-22CW/Pmakesshortworkoflongscrap.Plasticandwood:strips,mouldings,siding,windowprofiles,andlumber,as well as wood rippings and slabs are quickly shredded in a continuous process by this popular mid-sized machine.

VH-14/40 CW/P

Details: VH-25CW/P VH-34CW/P VH-50/125CW

InfeedOpening 25”x5” 34”x5” 50”x6”

RotorDiameter 16” 16” 20”

NumberofCutters 34(40mmx40mm) 44(40mmx40mm) 64(40mmx40mm)

Rotor Speed 390 rpm 390 rpm 390 rpm

DriveMotorHP 60-75HP 75-125HP 125HP

Weight 4,960lbs 6,173lbs 11,023lbs

Voltage 460V/3Ph/60Hz 460V/3Ph/60Hz 460V/3Ph/60Hz

InfeedConveyor 16Ft.Vibratory 16Ft.Vibratory 16Ft.Vibratory

FeedRollers 2(1Top,1Bottom) 2(1Top,1Bottom) 7(3Top,4Bottom)

Another mid-sized continuous feeding horizontal shredder ideally suited forgrindinglinealwoodandplasticwaste,theVH-25CW/Pcomeswitha standard 16’ vibratory conveyor, and has a 25”x 5” infeed opening. It processes wood strips, edge rippings, slabs, other long wood scrap, aswellasPVCsiding,windowframeextrusions,mouldings,orplastic,wood and composite lumber.

VH-34 CW/PEngineered especially for size reduction of wood scrap. TheVH-34CW/PisoneofVecoplan’slargerhorizontalshredders. In addition to its standard continuous feed 16’ vibratory conveyor it features a 34”x 5” infeed opening to handle any length of scrap up to 34” wide and 5” in thickness. Large sizes and volumes of edge rippings, slabs, lumber, mouldings, or any other wood strips are quickly and effortlessly processed by this machine.

VH-50/125 CWThe largest in Vecoplan’s line of horizontal shredders,theVH-50/125CWfeaturesamassive50”x 6” infeed opening making it perfect for shredding wood or plastic pallets, full sheets of plywood,MDF,OSB,orvirtuallyanytypeofsheet- wood, plastic, or composite materials. Like all shredders in Vecoplan’s horizontal series, it comes standard with a continuously feeding 16’ vibratory conveyor and is designed to process all types of lineal wood or plastic waste.

VH-25 CW/P

www.vecoplan.com

P.O. Box 7224 • High Point, NC 27264Phone: (336) 861-6070 • Fax: (336) 861-4329