Honeywell Sensor Presion 15pdaa5
Transcript of Honeywell Sensor Presion 15pdaa5
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 1/8
ISSUE 5
50044172
Sensing and Control
GENERAL INFORMATION
TruStability™ High Accuracy Silicon Ceramic (HSC) Series
and Standard Accuracy Silicon Ceramic (SSC) Series s are
piezoresistive silicon pressure sensors offering a ratiometric
analog output for reading pressure over the specified full scale
pressure span and temperature range. They are available in
standard pressure ranges from 1 psi to 150 psi (60 mbar to
10 bar) and are intended for use with non-corrosive, non-ionic
gases, such as air and other dry gases. The liquid media
option extends the performance of these sensors to con-
corrosive, non-ionic liquids.
LIQUID MEDIA OPTIONCAUTIONPRODUCT DAMAGE
Ensure liquid media is applied to Port 1 only; Port 2 is not
compatible with liquids.
Ensure liquid media contains no particulates. All
TruStability ®
sensors are dead-ended devices.
Particulates can accumulate inside the sensor, causing
damage or affecting sensor output.
Recommend that the sensor be positioned with Port 1
facing downwards; any particulates in the system are less
likely to enter and settle within the pressure sensor if it is
in this position.
Ensure liquid media does not create a residue when dried;
build-up inside the sensor may affect sensor output.
Rinsing of a dead-ended sensor is difficult and has limited
effectiveness for removing residue.
Ensure liquid media are compatible with wetted materials.
Non-compatible liquid media will degrade sensor
performance and may lead to sensor failure.
Failure to comply with these instructions may result in
product damage.
SOLDERING
See soldering times and temperatures in Table 2.
CLEANING
CAUTIONIMPROPER CLEANING
Ensure cleaning fluids, such as appropriate alcohols or
fluorinated solvents, are used based on the type of
contaminants to be removed.
Do not immerse the sensor.
Failure to comply with these instructions may result in
product damage.
Table 1. Environmental Specifications
Parameter Characteristic
Humidity:
Dry gases only
Liquid media option
0% to 95% RH, non-condensing
100% condensing or direct liquid
media on Port 1
Vibration MIL-STD-202F, Curve AK (20.7 g
random)
Shock MIL-STD-202F, Method 213B,
Condition F
Life1 1 million cycles minimum
Solder reflow J-STD-020-C
Table 2. Absolute Maximum Ratings2
Parameter Min. Max. Unit
Supply voltage -0.3 6.0 VVoltage on output pin -0.3 Vsupply + 0.3 V
ESD susceptibility (human body model) 3 kV
Storage temperature range -40 [-40] 85 [185] °C [°F]
Soldering times and temperature:
Lead solder (SIP, DIP)
Peak reflow (SMT)
4 s max. at 250 °C [482 °F]
15 s max. at 250 °C [482 °F]
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 2/8
Issue 5 50044172
Table 3. Operating Specifications
Parameter Min. Typ. Max. UnitSupply voltage (Vsupply) :
3.3 V
5.0 V
3.0
4.75
3.34
5.04
3.6
5.25
Vdc
Supply current:3.3 V supply5.0 V supply
-
1.62
2.13
mA
Compensated temperature range :HSC SeriesSSC Series
0 [32]-20 [-4]
50 [122]85 [185]
°C [°F]
Operating temperature range :HSC SeriesSSC Series
-20 [-4]-40 [-40]
85 [185]85 [185]
°C [°F]
Startup time (power up to data ready) - 5 msResponse time 1 msUpper output clipping limit 97.5 %VsupplyLower output clipping limit 2.5 %VsupplyAccuracy - ±0.25 %FSS BFSL
Total error band :
HSC SeriesSSC Series
-
--
±1±2
%FSS9
Output resolution 0.03 - - %FSS
Table 4. Wetted Materials10
Parameter Port 1 (Pressure Port) Port 2 (Reference Port)
Covers high temperature polyamide high temperature polyamide
Substrate alumina ceramic alumina ceramic
Adhesives epoxy, silicone epoxy, silicone
Electronic components ceramic, glass, solder, silicon silicon, glass, gold, solder
Notes:
1.
Life may vary depending on specific application in which sensor is utilized.
2.
Absolute maximum ratings are the extreme limits the device will withstand without damage.
3.
Ratiometricity of the sensor (the ability of the device to scale to the supply voltage) is achieved within the specified operating voltage for eachoption. Other custom supply voltages are available, please contact Honeywell Customer Service.
4.
The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.
5. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within
the specified performance limits.
6.
The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not
remain within the specified performance limits.
7.
Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at
25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.
8.
Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.
Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal
effect on span, and thermal hysteresis.
9.
Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of
the pressure range.
10. Contact Honeywell Customer Service for detailed material information.
Table 5. Pinout for DIP and SMT Packages
Output Type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8
analog NC Vsupply OUTPUT+ GND NC NC NC NC
Table 6. Pinout for SIP Package
Output Type Pin 1 Pin 2 Pin 3 Pin 4
analog NC Vsupply OUTPUT+ GND
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 3/8
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 4/8
Issue 5 50044172
Figure 2. SMT Pressure Port Dimensional Drawings (For reference only: mm [in])
SMT NN: No ports
13,4[0.53]
10,0[0.39]
6,99[0.275]
1 2 3 4
8 7 6 5
5,44[0.214]
2,54 TYP.[0.100]
6,41[0.252]
4,80[0.189]
8X 0,46 [0.018]
PORT 1 PORT 2
SMT AN: Single axial barbed port
1 2 3 4
8 7 6 5
10,0[0.39]
13,4[0.53]
7,95[0.313]
13,75[0.541]
4,93 DIA.[0.194]
2,54 TYP.[0.100]
PORT 1
PORT 2
6,77[0.266]
4,80[0.189]
8X 0,46 [0.018]
6,99[0.275]
SMT LN: Single axial barbless port
10,0[0.394]
13,35[0.525]6,99
[0.275]
1 2 3 4
8 7 6 5
2,54 TYP.[0.100]
6,77[0.266]
4,80[0.189]
5,80[0.228]
13,75[0.541]
8X 0,46 [0.018]
PORT 1
PORT 2
2,47 DIA.
[0.097]
SMT RN: Single radial barbed port
13,3
[0.53]
10,0[0.39]
6,99[0.275]
1 2 3 4
8 7 6 5
5,80[0.228]
2,54 TYP.[0.100]
6,77[0.266]
4,80[0.189]
8X 0,46 [0.018]
PORT 1
1,93 DIA. [0.076]
4,2[0.17]
PORT 1 PORT 2
SMT RR: Dual radial barbed ports, same side
10,0[0.39]
6,99[0.275]
1 2 3 4
8 7 6 5
6,16[0.242]
2,54 TYP.[0.100]
6,77[0.266]
4,80[0.189]
8X 0,46 [0.018]
13,35
[0.525]
4,6[0.18]
PORT 1
PORT 2
2X 1,93 DIA. [0.076]
PORT 1 PORT 2
4,0[0.16]
3,78[0.149]
SMT DR: Dual radial barbed ports, opposite sides
1 2 3 4
8 7 6 5
13,4[0.53]
PORT 2
PORT 1
10,0[0.39]
6,99[0.275]
2X 2,93 [0.115]
15,8[0.62]
2,54 TYP.[0.100]
2X 1,93 DIA.[0.076]
6,77[0.266]
4,80[0.189]
6,16[0.242]
3,78[0.149]
8X 0,46 [0.018]
Recommended PCB Pad Layout
2,54[0.100]
9,40[0.370]
2,032[0.080]
1,143
[0.045]
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 5/8
Issue 5 50044172
Figure 3. SIP Package Dimensional Drawings (For reference only: mm [in])
SIP NN: No ports
2,54 TYP.[0.100]
10,0[0.39]
15,2[0.60]
10,0[0.39]
1 2 3 4
4X 0,51 [0.020]
4,87[0.192]
PORT 1 PORT 2
0,25[0.010]
SIP AA: Dual axial barbed ports, opposite sides
PORT 1 PORT 2
0,25[0.010]
1 2 3 4
10,0[0.39]
10,0[0.39]
2,54 TYP.[0.100]
15,2[0.60]
22,06[0.869]
2X 4.93 DIA.[0.194]
4X 0,51 [0.020]
SIP AN: Single axial barbed port
0,25[0.010] 2,54 TYP.
[0.100]
PORT 1
1 2 3 4
10,0[0.39]
4.93 DIA.[0.194]
10,0[0.39]
13,75[0.541]
15,2[0.60]
PORT 2
4X 0,51 [0.020]
SIP LN: Single barbless port
10,0[0.39]
15,2[0.60]
10,0[0.39]
1 2 3 4
2,54 TYP.[0.100]
PORT 1
PORT 2
0,25[0.010]
13,75[0.541]
4X 0,51 [0.020]
2,47 DIA.[0.097]
SIP FF: Fastener mount, dual axial barbed ports, opposite sides
0,25[0.010] 2,54 TYP.
[0.100]
29,48[1.161]
1 2 3 4
27,20[1.071]
23,12[0.910]
10,44[0.411]
PORT 1PORT 2
17,78[0.700]
20,16[0.794]
2X 4,78 DIA.[0.188]
2X 3.94 DIA.[0.155]
4X 0,51 [.020]
SIP FN: Fastener mount, single axial barbed port
1 2 3 4
17,78[0.700]
20,16[0.794]
2,54 TYP.[0.100]
0,25[0.010]
29,48[1.161]
23,12[0.910]
PORT 1PORT 2
16,38[0.645]
2X 3.94 DIA.[0.155]
4.78 DIA.[0.188]
4X 0,51 [0.020]
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 6/8
Issue 5 50044172
Figure 3. SIP Package Dimensional Drawings (continued)
SIP GN: Ribbed fastener mount, single axial barbed port
2,54 TYP.[0.100]
21,60[0.850]
PORT 1PORT 2
1 2 3 4
4.78 DIA.[0.188]
0,25[0.010]
2X 3,94 DIA.[0.155]
27,96[1.101]
16,51[0.650]
19,06[0.750]
10,63[0.418]
4X 0,51 [0.020]
SIP NB: Fastener mount, dual axial ports, same side
0,25[0.010]
2,54 TYP.[0.100]
22,87[0.900]
13[0.52]
2X 3.50 DIA.[0.138]
21,60[0.850]
27,31[1.075] 25,3
[0.996]
PORT 1
PORT 2
4 3 2 1
4X 0,51 [0.020]
2X 4,80 DIA.[0.189]
SIP RN: Single radial barbed port
0,25[0.010] 2,54 TYP.
[0.100]
PORT 1
PORT 2
10,0[0.39]
15,2[0.60]
10,0[0.39]
1 2 3 4
5,80[0.228]
1,92 DIA.[0.076]
4X 0,51 [0.020]
SIP RR: Dual radial barbed ports, same side
0,25[0.010] 2,54 TYP.
[0.100]
PORT 1
PORT 2
1 2 3 4
10,0[0.39]
15,2[0.60]
10,0[0.39]
2X 1,92 DIA. [0.076]
6,16[0.243]
4X 0,51 [0.020]
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 7/8
Issue 5 50044172
Figure 3. SIP Package Dimensional Drawings (continued)
SIP DR: Dual radial barbed ports, opposite side
0,25[0.010] 2,54 TYP.
[0.100]
PORT 1 PORT 2
1 2 3 4
10,0[0.39]
10,0[0.39]
15,2[0.60]
6,16[0.243]
2X 4.93 DIA.[0.194]
15,8[0.62]
4X 0,51 [0.020]
SIP HH: Fastener mount, dual radial barbed ports, same side
0,25[0.010]
1 2 3 4
28,96[1.140]
2,54 TYP.[0.100]
PORT 1PORT 2
29,62[1.166]
23,12[0.910]
11,27[0.444]
6,64[0.261]
10,58[0.416]
4X 0,51 [0.020]
PORT 1PORT 2
SIP HN: Fastener mount, single radial barbed port
28,96[1.140]
11,27[0.444]
23,12[0.910]
0,25[0.010] 2,54 TYP.
[0.100]
1 2 3 4
2X 3,94 DIA.[0.155]
7,97[0.314]
4,78 DIA.[0.188]
4X 0,51 [0.020]
PORT 1
PORT 2
SIP MN: Manifold mount, outer diameter seal
2,54 TYP.[0.100]
0,25[0.010]
1 2 3 4
PORT 1PORT 2
15,24 DIA.[0.600]
12,5[0.49]
5,36[0.211]
4X 0,51 [0.020]
SIP SN: Manifold mount, inner diameter seal
2,54 TYP.[0.100]
1 2 3 4
13,11[0.516]
12,57[0.495]
15,6[0.61]
5,1[0.20]
4X 0,51 [0.020]
PORT 1
PORT 2
Recommended PCB Pad Layout
0,914 DIA.[0.036]
2,54
[0.100]
8/11/2019 Honeywell Sensor Presion 15pdaa5
http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 8/8
Issue 5 50044172
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
http://sensing.honeywell.com
50044172-5-EN
August 2012
Copyright © 2012 Honeywell International Inc. All rights reserved.
PERSONAL INJURY
DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. Theforegoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.However, we assume no responsibility for its use.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local salesoffice or:
E-mail: [email protected]
Internet: http://sensing.honeywell.com
Phone and Fax:
Asia Pacific +65 6355-2828
+65 6445-3033 Fax
Europe +44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax