HONDA GROM - New Rage Cycles...HONDA GROM FRONT TURN SIGNALS 2 3 Remove (2) bolts on either side of...
Transcript of HONDA GROM - New Rage Cycles...HONDA GROM FRONT TURN SIGNALS 2 3 Remove (2) bolts on either side of...
![Page 1: HONDA GROM - New Rage Cycles...HONDA GROM FRONT TURN SIGNALS 2 3 Remove (2) bolts on either side of headlight (picture 1) Unplug both connectors on back of headlight Remove push pin](https://reader033.fdocuments.in/reader033/viewer/2022061604/5f82dfd8d88ff6795d55716d/html5/thumbnails/1.jpg)
1
HONDA GROMFRONT TURN SIGNALS
2
3
Remove (2) bolts on either side of headlight (picture 1)
Unplug both connectors on back of headlight
Remove push pin and bolt underneath headlight and separate the headlight (picture 2/3)
4 Remove screw on back of stock signal, pop out metal plate and remove stock blinkers (picture 4)
5 Pop rubber grommet out from inside turn signal housing
6 Remove single screw on plastic
7 Feed connector through plastic housing, line up lenses and screw together (picture 5/6)
8 Reassemble brackets onto headlight and reinstall stock hardware
9 Plug (2) connectors back into bike behind headlight as well as (2) turn signal connectors
![Page 2: HONDA GROM - New Rage Cycles...HONDA GROM FRONT TURN SIGNALS 2 3 Remove (2) bolts on either side of headlight (picture 1) Unplug both connectors on back of headlight Remove push pin](https://reader033.fdocuments.in/reader033/viewer/2022061604/5f82dfd8d88ff6795d55716d/html5/thumbnails/2.jpg)
FRONT TURN SIGNALS
10 Test connections and signals prior to mounting headlight back onto bike
11 Finish reassembling hardware to mount headlight