Should crops go on the top or bottom of the hill? Which direction should the rows of crops go ?
Home Cinema U-100 An HD ultra-short throw smart projectorTOP VIEW 3.Increase the volume 4.MENU...
Transcript of Home Cinema U-100 An HD ultra-short throw smart projectorTOP VIEW 3.Increase the volume 4.MENU...
An HD ultra-short throw smart projector
USER MANUAL
U-100Home Cinema
Please read this user manual carefully before using your unit.
-1-
CONTENTS
CAUTION 2
3WHAT IS IN THE BOX
4 -5 PRODUCT INTRODUCTION
7
6
WIRELESS MOUSE DESCRIPTION
HOW TO ACCESS THE INTERNET THROUGH ETHERNET CONNECTION 17
19
HOW TO ACCESS THE INTERNET THROUGH A 3G MOBILE PHONE CONNECTION
(PART II: THROUGH A 3G ENABLED iPhone)
29
TROUBLESHOOTING
SPECIFICATION
28
HOW TO ACCESS THE BLUETOOTH SPEAKER THROUGH BLUETOOTH CONNECTION 27
18HOW TO ACCESS THE INTERNET THROUGH A 3G MOBILE PHONE CONNECTION(PART I: THROUGH A 3G ENABLED ANDROID SMARTPHONE)
HOW TO ACCESS THE AIRPLAY CASTING PROGRAM 26
11-14
20-21HOW TO ACCESS THE MIRACAST CASTING PROGRAM
22-23HOW TO ACCESS THE DLNA DMP CASTING PROGRAM
24-25HOW TO ACCESS THE DLNA DMR CASTING PROGRAM
ABOUT SYSTEM SETTING
MAIN MENU INTRODUCTION
HOW TO ACCESS THE INTERNET THROUGH WI-FI CONNECTION 16
15
REMOTE CONTROLLER INTRODUCTION / HOW TO USE THE REMOTE CONTROLLER
8CONNECTION TO EXTERNAL EQUIPMENTS
10HOW TO ADJUST THE SCREEN ANGLE OF THE PROJECTOR
9HOW TO USE THE PROJECTOR
-2-
Do not look into the lens while the projector is in operation.
Do not use the projector at dusty or dirty places.
Do not cover or block vents of the projector.
No user serviceable parts.
Unplug the projector if you are not going to use it for a while.
CAUTION
CONTENTS
Do not use the projector under extremely hot, cold or high humidity environment.
The actual products may be different from the photo.
-3-
CHECKING ON THE ACCESSORIES
Note: The appearances of accessories may vary from country to country. Please refer them to the actual items in the box.
WHAT IS IN THE BOX
These images are for illustrative purposes only. For real shapes, please refer to the actual products.
Power Adapter
Wireless Mouse
Projector
Mouse Pad User Manual
Remote Controller(one piece of CR2032 Lithium
battery is included)
-4-
PRODUCT INTRODUCTION
TOP VIEW
3. Increase the volume
4.MENU button
5.Direction Keys
Direction
Go to left selection page / cursor left
Go to right selection page / cursor right
Go to previous selection page / cursor up
Go to next selection page / cursor down
8.Return button
9.Source button
10. Power on/off
6.OK button: Confirm / Play
7.Home button
2.Decrease the volume
1.Mute: Turn off / restore the sound
1 2 3 45 6 7 8 9 10
11
14. IR receiving sensor
12. Left height adjuster
11. Lens
13. Tilt adjuster
15. Right height adjuster
12 13 14 15
FRONT VIEW
-5-
SIDE VIEW
16
18 19 20 21 23
16 . USB ports
18. AV input port
2417
17 . DC power input jack
19 . Ethernet input port
20. USB ports
21. HDMI input port
22
22. Micro SD / TF card slot
24. Audio out
REAR VIEW 23. IR receiver input jack
-6-
REMOTE CONTROLLER BATTERY INSTALLATION
Loosen screws and then pull out the battery compartment as per the illustrations 1 , 2 shown.Insert battery with the polarity (+) facing up (battery model: CR2032 3V).Replace the compartment and fix it with screws as per theillustration 4 shown.
1
2
4
3
Battery
If you do not use the remote for a long time, please controllertake out the battery to prevent battery leakage in the compartment.
Note
OPERATION RANGE
For an effective operation, please point the remote controller to the IR sensor on the back of the projector. The maximum signal working range is shown as below:
REMOTE CONTROLLER INTRODUCTION / HOW TO USETHE REMOTE CONTROLLER
1
2
11
12
4 14
13
5
6 16
7
8 17
9 18
3
15
1011
CONTROLLER FUNCTION KEYS
16
15
17
Power Turn on/off the unit
Home Enter main menu
Return Exit current mode, previous control level
OK Confirm / play
Go to left selection page / cursor left
Go to right selection page / cursor right
Go to previous selection page / cursor up
Volume + Increase the volume
Volume - Decrease the volume
Source Switch among data source
channels: AV / HDMI 1 / HDMI 2
Menu
Browse next pageshortcut
Press the button to browse the next page
Display MENU page
18
Browse previous page shortcut
Press the button to browse the previous page
12
13
14Go to next selection page /
cursor down
LED indicator
Play/pause Activate or stop the playing of music or video
1
2
3
4
5
6
7
8
9
10
19
19 adjust the focus -Focus -
adjust the focus +Focus +
Turn off / restore the soundMute
If LED indicator flashes
continuously, means that
the battery is in low power.
Note: 1. You can also use the infrared wireless mouse (included in the box) to control moves.
2. Using a mouse to interactive with the projector is just like the way you use it to operate a computer. The only difference is you can click the right button of the mouse to go back to previous page of the projector.
WIRELESS MOUSE DESCRIPTION
-7-
The image is for illustrative purposes only. For the real shape, please refer to the actual product.
and insert it into the USB port of projector.
3. Instal battery(UM4/AAA), and then replace the cover.
-8-
CONNECTION TO EXTERNAL EQUIPMENTS
HDMI
Connecting USB drive, Micro SD, or TF card
Note: This projector can access the internet independently without being connected to any external devices.
Connecting a USB drive, Micro SD, or TF card into the USB
socket or the card slot on the projector. Select "LOCAL" on
main menu to switch to the USB or SD/TF channel for
projection.
Connecting audio/video equipment (AV equipment)
Connecting an external AV equipment by the composite RCA AV cable (included) to the AV input port on the projector.Select "SOURCE" on main menu to switch to the AV channel after being connected c orrectly.
Connecting a TV set top box, game console, computer,
mobile phone, or media tablet
-9-
HOW TO USE THE PROJECTOR
1. Connecting to AC power
To DC IN 12V on the Projector
2. Turn on the projector and the external equipment
if existed.
If the image is not clear enough, please use focus+/- buttons on the remote controller to adjust it.
(raise the tilt adjuster) (lower the tilt adjuster)
(raise the left height adjuster) (lower the left height adjuster)
(Note: Clockwise adjustment to the adjusters is to raise the height; counterclockwise adjustment to the adjusters is to lower the height.)
(tilt adjuster)
(left height adjuster)
(right height adjuster)
Left edge wider / right edge narrower
(rotate clockwise)
left edge narrower / right edge wider
(rotate counterclockwise)
If the projected image is distorted as above illustrations, rotate the projector to correct it.
If the projected image is tilted as above illustrations, adjust the tilt adjuster of the projector to correct it.
When the "tilt adjuster" is adjusted to thelimit but the projection image is still tilted as shown above, please further adjust the left/right height adjusters simultaneously in the same degree until the "Normal" image is displayed.
(You may use the keystone function in the system to do minor corrections.)
If the projected image is slanted as above illustrations, raise or lower the right height adjuster.
When the "right height adjuster" is raised to the limit but the projected image is stillslanted to right, please lower the " leftheight adjuster" until the "Normal" image is displayed.
When the "right height adjuster" is lowered to the limit but the projected image is stillslanted to left, please raise the "leftheight adjuster" until the "Normal" image
is displayed.
(Note: If not necessary, try not to adjust the left height adjuster.)
-11-
MAIN MENU INTRODUCTION
After the Projector is powered on, the following interface (main menu) appears:
SourceShow the current channel.
Wireless CastingYou can access Miracast, DLNA, & AIRPLAY casting programs here.
SettingsAccess all system related configurations.
+Add shortcuts to apps.
MusicStores frequently use or favorite online music player apps.
LocalPlay or view files in the built-in memory or external storage device inserted.
My AppsStores all apps
-12-
1. SOURCEConnecting AV / HDMI1 / HDMI 2
2. WIRELESS CASTING Click "Wireless Casting" on the main menu to enter the "Wireless Casting" page.
Select " " on the projector or the remote controller,
to switch among AV / HDMI1 / HDMI2 channels.
3. SETTINGS Select " " on the projector or the remote controller, then click "Settings" on the main menu to enter the "Settings" page.
HDMI1
HDMI2
4. MY APPS Click "My Apps" on the main menu to enter the "My Apps" page.
-13-
5. MUSIC Click "Music" on the main menu to enter the "Music"
page.
When connecting with Micro SD/TF card or USB drive, please select your Micro SD/ TF card or USB.
Step 1: On PC, find APK fromhttps://play.google.com/store
Step 2: Copy the APK tohttp://apps.evozi.com/apk-downloader/Step 3: Download the APK to PC.Step 4: Save the APK in a micro SD card.
Step 5: Insert the micro SD card into the unit to install the APK.
Note: The unit supports third-party Android applications. Applications can be downloaded and installed from the internet directly. If you encounter difficulties doing so for some reasons, you can follow below steps to download the application on a PC, copy it onto a micro SD card, then install the application to the unit.
-14-
When connecting Micro SD/TF card or USB drive, please follow below steps to select the content inside.
6. LOCAL Click "Local" on the main menu to enter the "Local" page.
When playing video, press【OK】to popup OSD menu. You u se【 / 】 button t o s elect t he f unction, a nd p ress 【 OK】 to operate.
The OSD function menu is explained as below:
PlayPause
Fast forward
NextPrevious
Rewind Playing listReturn
-15-
ABOUT SYSTEM SETTING
main menu
About device: system updates, status, legal information, model number, Android version, kemel version, build number.
Click Settings
-16-
HOW TO ACCESS THE INTERNET THROUGH WI-FI CONNECTION
Click Settings on the main menu to enter the "Settings" page.
Under "Network", click on "Wi-Fi", the screen will show available Wi-Fi networks. Select the one you want to connect with.
Click to return to the main menu. Then you may surf the internet by clicking the browser.
Wi-Fi SETTINGS
2
HOW TO ACCESS THE INTERNET THROUGH ETHERNET CONNECTION
-17-
ETHERNET SETTINGSConnect network cable.
Click Settings on the main menu to enter the "Settings" page.
Under "Network", click on "Ethernet", the screen will show Connected to IP.
Click to return to the main menu. Then you may surf the internet by clicking the browser.
WAN LAN
Network cable Network cable
Router
3
2
HOW TO ACCESS THE INTERNET THROUGH A 3G MOBILE PHONE CONNECTION (PART I: THROUGH A 3G ENABLED ANDROID SMARTPHONE)
1. Enter "Setting" on smart phone, follow the following steps to finish your setting.
2. Enter "Setting" on the projector, click "Wi-Fi" to auto-search smartphone hotspot and connect.
-18-
-19-
HOW TO ACCESS THE INTERNET THROUGH A 3G MOBILE PHONE CONNECTION (PART II: THROUGH A 3G ENABLED iPhone)
1. Enter "Setting" on iPhone, follow the following steps to finish your setting.
2. Enter "Setting" on the projector, click "Wi-Fi" to auto-search iPhone hotspot and connect.
-20-
Turn on the projector. Select Miracast under Wireless Casting. Click Settings, then you find the Target Name. You may change the default Target Name by click the Target Name and change.
1. Find the Target Name of the projector firstly.
2.Make sure the projector and the end device (for example: a handset, a tablet ... with Miracast function) are linked on the same Wi-Fi network.
HOW TO ACCESS THE MIRACAST CASTING PROGRAM
-21-
3. Turn on the Miracast function on the end device.4. Turn on the Miracast function on the projector by clicking "Search Device" under Wireless Casting on the main menu.5. Turn on the search device function of the end device, then click the right Target Name of the projector it finds.6. The projection screen will pop-up a column asking for connection with the end device. Click "Accept".7. The projection screen will be in line with the end device showing the same content on the display of the end device.
-22-
DLNA DMP (DLNA Digital Media Player):
1. Make sure the end device linked with the projector on the same WiFi network.2. Turn on the DLNA function on the end device. * For PC (Windows) (1) Turn on Windows Media Player
(2) Click" stream", activate "allow remote control of my Player… " and "automatically allow devices to play my media...". Click "More streaming options…". Find the Target Name of the projector on the list. Click the right button to make it "allowed", which allows the other device to visit your media share.
HOW TO ACCESS THE DLNA DMP CASTING PROGRAM
-23-
* For other end devices (1) Turn on the DLNA function.
(2) Turn on the projector and select Media Center in Wireless Casting . Select DLNA DMP. Click the up-right corner to refresh. Then it will show the names of connectable devices on the right side. Select and click the device of your choice. Then, the projector will play the video, picture, music on Media Center of the chosen device.
-24-
DLNA DMR (DLNA Digital Media Renderer):
1. Make sure the end device linked with the projector on the same WiFi network.2. Turn on the projector and select DLNA DMR on Media Center in Wireless Casting. Turn on all the selection items on the right side.
3. Install DLNA player on the DLNA supported device (handset, tablet ...). Open the file that you want to play locally or on-line.
HOW TO ACCESS THE DLNA DMR CASTING PROGRAM
-25-
4. There are DLNA selections on the display of the device. If not found, select MENU and find the DLNA
selections where you can choose the Target Name of the projector.
5. The projector will be playing the file on the device you opened.
-26-
1. Make sure the Apple device linked with the projector on the same WiFi network.2. Turn on the projector and select AirPlayer beneath Media Center in Wireless Casting .
3. Turn on all the selection items of Airplay on the Apple device.4. Slide your finger from the bottom of the screen of the Apple device. Turn on the function icons. (Some Apple devices need double clicks on the Home key, then slide twice with finger from left to right.)5. Slide you finger twice from left to right on the bottom of the function icons. Click Airplay icon.6. Select the Target Name of the projector and start mirroring.7. Now, the projection screen will be mirroring the Apple device.
Note: You may also choose the device on the player list to broadcast the document, or just broadcast the content you deliver to the projector.
HOW TO ACCESS THE AIRPLAY CASTING PROGRAM
-27-
HOW TO ACCESS THE BLUETOOTH SPEAKER THROUGH BLUETOOTH CONNECTION
BLUETOOTH SETTINGS
2
1
On Main Manual, select Settings. Click "Settings", then click "Add accessory".
Turn on the Bluetooth by clicking the up right "on-off" switch.
Available Bluetooth devices will be shown up.
Click the one you want to connect with.4.
TROUBLESHOOTING
-28-
SPECIFICATION
-29-U-100-09-V01
365x345x124mm
5.16 kg
Processor Quad Core
3cm~ 46cm(1.2"-18") (from front edge to wall)70"~ 180"Projection size
Projection distance
Dimension
Color brightness
Imaging technology DLP
Base Features
Inputs & Outputs
File decoder
(for USB drive & memory card)
Operating System
Resolution
Connectivities
System Memory
Internal Storage
Micro SD / TF card
Video file format
Integrated WiFi
USB Host
HDMI
Document file format
8GB (partially occupied by the system)
Yes
JPEG, BMP, GIF, PNG
TXT, PDF, OFFICE (with APK installed)
Yes (2)
2.4G & 5G
DDR3 2G
Android
Power supply DV 12V / 10A
Weight
Ethernet Yes
Bluetooth Yes
MKV, WMV, MPG, DAT, MPEG, AVI, MOV, MP4, RM, F4A, FVV, RMVI
M4A, M4R, MP2, MP3, OGG, WAV, ACC, AMV, CPE, FLAC
White brightness
Throw ratio 0.2 : 1
LED
Yes (3)
Light source
700 lumens (on LED scale)
1280 x 800
Casting programs Yes
Audio file format
Images file format
CVBS (RCA) Yes
Perceived brightness 3000 lumens (on lamp scale)
700 lumens (on LED scale)
Polaroid, Polaroid & Pixel, Polaroid Classic Border logo and Polaroid Color Spectrum are trademarks of PLR IP Holdings, LLC, used under license.
Manufactured by :
World Electronic (Shenzhen) Co., Ltd.
No.160 Longping West Road, Central Town Longgang District, Shenzhen City, Guangdong Province, China
MADE IN CHINA
@ 2017 All Rights Reserved