History of Bull

7/30/2019 History of Bull

1/38

qWTRFHOIP[LOKJGTFRDWETFIO[\]'[POIJGYTRE\WEARTFIOPL;PLOIGYTRESWARTFYIOP[;LOIJGYTREWAERTFYIOPL;[;POIUGYTRSWEERTFYIOPLOKGYTREWWAERTFIOP[;POKGYTRESWARTFYUOIP[LLOKIUGYTRESWAQWERTFYUIOP[;PLIGTFRSZZDSCGIPL[;PLOIJTYRTRESWSREFYGUIOPLjklkjgfdsdfgkl;lkgfddfiop[pogfgfdertiokjcvklknsertiokgvcjklkb1c000 - 00000000baf1f000 (reserved)[ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS)[ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bfe00000 (usable)[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] DMI 2.6 present.

[ 0.000000] DMI: Dell Inc. Dell System Inspiron N7110/0YH79Y, BIOS A05 05/19/2011[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)[ 0.000000] last_pfn = 0x1bfe00 max_arch_pfn = 0x1000000[ 0.000000] MTRR default type: uncachable[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-BFFFF uncachable[ 0.000000] C0000-FFFFF write-protect[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect

[ 0.000000] 1 base 000000000 mask F80000000 write-back[ 0.000000] 2 base 080000000 mask FC0000000 write-back[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable[ 0.000000] 5 base 100000000 mask F80000000 write-back[ 0.000000] 6 base 180000000 mask FC0000000 write-back[ 0.000000] 7 base 1BFE00000 mask FFFE00000 uncachable[ 0.000000] 8 disabled[ 0.000000] 9 disabled[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 0.000000] initial memory mapped : 0 - 01e00000[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000[ 0.000000] 0000000000 - 0000200000 page 4k

[ 0.000000] 0000200000 - 0037a00000 page 2M[ 0.000000] 0037a00000 - 0037bfe000 page 4k[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000[ 0.000000] RAMDISK: 3677a000 - 373b5000[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 DELL )[ 0.000000] ACPI: XSDT baffe120 0008C (v01 DELL QA09 00000002 LOHR 00000002)[ 0.000000] ACPI: FACP bafed000 000F4 (v03 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: DSDT baff0000 09C5C (v02 DELL SNB-CPT 00000000 INTL 2006


2/38

1109)[ 0.000000] ACPI: FACS baf41000 00040[ 0.000000] ACPI: SLIC baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)[ 0.000000] ACPI: BOOT baffc000 00028 (v01 00000001 PTL 00000001)[ 0.000000] ACPI: SSDT baffa000 01068 (v01 DELL PtidDevc 00001000 INTL 20061109)[ 0.000000] ACPI: ASF! bafef000 000A5 (v32 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: HPET bafec000 00038 (v01 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: APIC bafeb000 00098 (v01 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: MCFG bafea000 0003C (v01 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: SSDT bafe9000 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)[ 0.000000] ACPI: SSDT bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)[ 0.000000] ACPI: UEFI bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: UEFI bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)

[ 0.000000] ACPI: UEFI bafe5000 00256 (v01 DELL QA09 00000002 PTL 00000002)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] 6274MB HIGHMEM available.[ 0.000000] 891MB LOWMEM available.[ 0.000000] mapped low ram: 0 - 37bfe000[ 0.000000] low ram: 0 - 37bfe000[ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0x00000010 -> 0x00001000[ 0.000000] Normal 0x00001000 -> 0x00037bfe[ 0.000000] HighMem 0x00037bfe -> 0x001bfe00[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[4] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009d[ 0.000000] 0: 0x00000100 -> 0x000bac8f[ 0.000000] 0: 0x000bafff -> 0x000bb000[ 0.000000] 0: 0x00100000 -> 0x001bfe00[ 0.000000] On node 0 totalpages: 1550877[ 0.000000] free_area_init_node: node 0, pgdat c17c2e40, node_mem_map f2f7a200[ 0.000000] DMA zone: 32 pages used for memmap[ 0.000000] DMA zone: 0 pages reserved[ 0.000000] DMA zone: 3949 pages, LIFO batch:0[ 0.000000] Normal zone: 1752 pages used for memmap[ 0.000000] Normal zone: 222502 pages, LIFO batch:31[ 0.000000] HighMem zone: 12549 pages used for memmap

[ 0.000000] HighMem zone: 1310093 pages, LIFO batch:31[ 0.000000] Using APIC driver default[ 0.000000] ACPI: PM-Timer IO Port: 0x408[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)


3/38

[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs[ 0.000000] nr_irqs_gsi: 40[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)[ 0.000000] Booting paravirtualized kernel on bare hardware[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144[ 0.000000] pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1536544[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-16-generic-pae root=UUID=265df767-ebc2-4384-b11e-7119dbcd30e3 ro quiet splash vt.handoff=7[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Initializing CPU#0[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340[ 0.000000] allocated 36689600 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups[ 0.000000] Initializing HighMem for node 0 (00037bfe:001bfe00)[ 0.000000] Memory: 6086840k/7337984k available (5375k kernel code, 116668k reserved, 2606k data, 720k init, 5290568k highmem)[ 0.000000] virtual kernel memory layout:[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)[ 0.000000] .init : 0xc17cc000 - 0xc1880000 ( 720 kB)[ 0.000000] .data : 0xc153fde1 - 0xc17cb800 (2606 kB)[ 0.000000] .text : 0xc1000000 - 0xc153fde1 (5375 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisormode...Ok.[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.[ 0.000000] RCU-based detection of stalled CPUs is disabled.[ 0.000000] NR_IRQS:2304 nr_irqs:744 16[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000[ 0.000000] Extended CMOS year: 2000


4/38

[ 0.000000] vt handoff: transparent VT on vt#7[ 0.000000] Console: colour dummy device 80x25[ 0.000000] console [tty0] enabled[ 0.000000] hpet clockevent registered[ 0.000000] Fast TSC calibration using PIT[ 0.004000] Detected 2292.462 MHz processor.[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4584.92 BogoMIPS (lpj=9169848)[ 0.000006] pid_max: default: 32768 minimum: 301[ 0.000026] Security Framework initialized[ 0.000037] AppArmor: AppArmor initialized[ 0.000038] Yama: becoming mindful.[ 0.000082] Mount-cache hash table entries: 512[ 0.000180] Initializing cgroup subsys ns[ 0.000183] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.[ 0.000185] Initializing cgroup subsys cpuacct[ 0.000190] Initializing cgroup subsys memory[ 0.000197] Initializing cgroup subsys devices[ 0.000199] Initializing cgroup subsys freezer[ 0.000201] Initializing cgroup subsys net_cls[ 0.000203] Initializing cgroup subsys blkio[ 0.000232] CPU: Physical Processor ID: 0[ 0.000233] CPU: Processor Core ID: 0

[ 0.000237] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'[ 0.000238] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)[ 0.000241] mce: CPU supports 7 MCE banks[ 0.000250] CPU0: Thermal monitoring handled by SMI[ 0.000257] using mwait in idle threads.[ 0.002912] ACPI: Core revision 20110112[ 0.008838] ftrace: allocating 24344 entries in 48 pages[ 0.018488] Enabling APIC mode: Flat. Using 1 I/O APICs[ 0.018837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.058461] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07[ 0.163711] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.[ 0.163717] ... version: 3

[ 0.163718] ... bit width: 48[ 0.163719] ... generic registers: 4[ 0.163720] ... value mask: 0000ffffffffffff[ 0.163722] ... max period: 000000007fffffff[ 0.163723] ... fixed-purpose events: 3[ 0.163724] ... event mask: 000000070000000f[ 0.164146] CPU 1 irqstacks, hard=f74d6000 soft=f74e0000[ 0.164150] Booting Node 0, Processors #1[ 0.174306] Initializing CPU#1[ 0.251598] CPU1: Thermal monitoring handled by SMI[ 0.271674] CPU 2 irqstacks, hard=f74ea000 soft=f74ec000[ 0.271679] #2[ 0.281924] Initializing CPU#2

[ 0.359430] CPU2: Thermal monitoring handled by SMI[ 0.379584] CPU 3 irqstacks, hard=f74f6000 soft=f74f8000[ 0.379588] #3[ 0.389832] Initializing CPU#3[ 0.662965] CPU3: Thermal monitoring handled by SMI[ 0.683029] Brought up 4 CPUs[ 0.683031] Total of 4 processors activated (41054.95 BogoMIPS).[ 0.685713] devtmpfs: initialized[ 0.686788] print_constraints: dummy:[ 0.686814] Time: 21:34:54 Date: 04/23/13


5/38

[ 0.686848] NET: Registered protocol family 16[ 0.686940] Trying to unpack rootfs image as initramfs...[ 0.687016] EISA bus registered[ 0.687034] ACPI: bus type pci registered[ 0.687130] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)[ 0.687135] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820[ 0.687137] PCI: Using MMCONFIG for extended config space[ 0.687140] PCI: Using configuration type 1 for base access[ 0.688871] bio: create slab at 0[ 0.690625] ACPI: EC: Look up EC in DSDT[ 0.692218] ACPI: Executed 2 blocks of module-level executable AML code[ 0.735018] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored[ 0.735469] ACPI: SSDT bae19718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)[ 0.735896] ACPI: Dynamic OEM Table Load:[ 0.735898] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)[ 0.759219] ACPI: SSDT baf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)[ 0.759685] ACPI: Dynamic OEM Table Load:[ 0.759687] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)[ 0.791014] ACPI: SSDT bae18d98 00119 (v01 PmRef ApCst 00003000 INTL 2006

1109)[ 0.791436] ACPI: Dynamic OEM Table Load:[ 0.791439] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)[ 0.809635] ACPI: Interpreter enabled[ 0.809645] ACPI: (supports S0 S3 S4 S5)[ 0.809676] ACPI: Using IOAPIC for interrupt routing[ 0.818504] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62[ 0.842892] ACPI: No dock devices found.[ 0.842897] HEST: Table not found.[ 0.842902] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug[ 0.843526] \_SB_.PCI0:_OSC invalid UUID

[ 0.843528] _OSC request data:1 8 1f[ 0.843535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])[ 0.844576] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7][ 0.844581] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff][ 0.844585] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff][ 0.844590] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff][ 0.844593] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff][ 0.844611] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600[ 0.844660] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300[ 0.844675] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]

[ 0.844684] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref][ 0.844691] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f][ 0.844774] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780[ 0.844811] pci 0000:00:16.0: reg 10: [mem 0xd1705000-0xd170500f 64bit][ 0.844901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold[ 0.844908] pci 0000:00:16.0: PME# disabled[ 0.844966] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03[ 0.844999] pci 0000:00:1a.0: reg 10: [mem 0xd170a000-0xd170a3ff][ 0.845108] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold[ 0.845115] pci 0000:00:1a.0: PME# disabled


6/38

[ 0.845155] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403[ 0.845181] pci 0000:00:1b.0: reg 10: [mem 0xd1700000-0xd1703fff 64bit][ 0.845286] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold[ 0.845293] pci 0000:00:1b.0: PME# disabled[ 0.845331] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604[ 0.845436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold[ 0.845442] pci 0000:00:1c.0: PME# disabled[ 0.845484] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604[ 0.845590] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold[ 0.845596] pci 0000:00:1c.2: PME# disabled[ 0.845637] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604[ 0.845742] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold[ 0.845748] pci 0000:00:1c.4: PME# disabled[ 0.845787] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604[ 0.845888] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold[ 0.845894] pci 0000:00:1c.5: PME# disabled[ 0.845941] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03[ 0.845974] pci 0000:00:1d.0: reg 10: [mem 0xd1709000-0xd17093ff][ 0.846076] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold[ 0.846082] pci 0000:00:1d.0: PME# disabled[ 0.846120] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601[ 0.846290] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106[ 0.846326] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f][ 0.846340] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]

[ 0.846355] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087][ 0.846369] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093][ 0.846382] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f][ 0.846395] pci 0000:00:1f.2: reg 24: [mem 0xd1708000-0xd17087ff][ 0.846462] pci 0000:00:1f.2: PME# supported from D3hot[ 0.846469] pci 0000:00:1f.2: PME# disabled[ 0.846502] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05[ 0.846530] pci 0000:00:1f.3: reg 10: [mem 0xd1704000-0xd17040ff 64bit][ 0.846569] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf][ 0.846975] pci 0000:01:00.0: [8086:008a] type 0 class 0x000280[ 0.847301] pci 0000:01:00.0: reg 10: [mem 0xd1600000-0xd1601fff 64bit][ 0.848427] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold[ 0.848479] pci 0000:01:00.0: PME# disabled

[ 0.854782] pci 0000:00:1c.0: PCI bridge to [bus 01-01][ 0.854790] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)[ 0.854797] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff][ 0.854807] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)[ 0.854917] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03[ 0.854956] pci 0000:02:00.0: reg 10: [mem 0xd1500000-0xd1501fff 64bit][ 0.855100] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold[ 0.855108] pci 0000:02:00.0: PME# disabled[ 0.862669] pci 0000:00:1c.2: PCI bridge to [bus 02-02][ 0.862677] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)[ 0.862685] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff][ 0.862696] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref

] (disabled)[ 0.862807] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200[ 0.862836] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff][ 0.862883] pci 0000:03:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref][ 0.862915] pci 0000:03:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref][ 0.863000] pci 0000:03:00.0: supports D1 D2[ 0.863003] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.863011] pci 0000:03:00.0: PME# disabled[ 0.870657] pci 0000:00:1c.4: PCI bridge to [bus 03-03][ 0.870665] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]


7/38

[ 0.870673] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)[ 0.870684] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff 64bit pref][ 0.870759] pci 0000:00:1c.5: PCI bridge to [bus 04-08][ 0.870766] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff][ 0.870774] pci 0000:00:1c.5: bridge window [mem 0xd0d00000-0xd14fffff][ 0.870785] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd0cfffff 64bit pref][ 0.870820] pci_bus 0000:00: on NUMA node 0[ 0.870826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 0.871062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT][ 0.871132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT][ 0.871196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT][ 0.871258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT][ 0.871402] \_SB_.PCI0:_OSC invalid UUID[ 0.871404] _OSC request data:1 1f 1f[ 0.871411] pci0000:00: Requesting ACPI _OSC control (0x1d)[ 0.871469] \_SB_.PCI0:_OSC invalid UUID[ 0.871471] _OSC request data:1 0 1d[ 0.875575] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)[ 0.875655] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9[ 0.875732] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)

[ 0.875808] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *9[ 0.875887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.[ 0.875962] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.[ 0.876038] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)[ 0.876114] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)[ 0.876274] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none[ 0.876286] vgaarb: loaded[ 0.876599] SCSI subsystem initialized[ 0.876666] libata version 3.00 loaded.

[ 0.876738] usbcore: registered new interface driver usbfs[ 0.876756] usbcore: registered new interface driver hub[ 0.876784] usbcore: registered new device driver usb[ 0.877150] wmi: Mapper loaded[ 0.877153] PCI: Using ACPI for IRQ routing[ 0.877156] PCI: pci_cache_line_size set to 64 bytes[ 0.877299] reserve RAM buffer: 000000000009d800 - 000000000009ffff[ 0.877303] reserve RAM buffer: 00000000bac8f000 - 00000000bbffffff[ 0.877311] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff[ 0.877314] reserve RAM buffer: 00000001bfe00000 - 00000001bfffffff[ 0.877447] NetLabel: Initializing[ 0.877450] NetLabel: domain hash size = 128[ 0.877451] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.877467] NetLabel: unlabeled traffic allowed by default[ 0.877520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0[ 0.877529] hpet0: 8 comparators, 64-bit 14.318180 MHz counter[ 0.879551] Switching to clocksource hpet[ 0.882621] Switched to NOHz mode on CPU #0[ 0.882675] Switched to NOHz mode on CPU #1[ 0.882728] Switched to NOHz mode on CPU #3[ 0.882753] Switched to NOHz mode on CPU #2[ 0.887930] AppArmor: AppArmor Filesystem Enabled[ 0.887960] pnp: PnP ACPI init


8/38

[ 0.887981] ACPI: bus type pnp registered[ 0.888523] pnp 00:00: [bus 00-3e][ 0.888528] pnp 00:00: [io 0x0000-0x0cf7 window][ 0.888531] pnp 00:00: [io 0x0cf8-0x0cff][ 0.888534] pnp 00:00: [io 0x0d00-0xffff window][ 0.888538] pnp 00:00: [mem 0x000a0000-0x000bffff window][ 0.888541] pnp 00:00: [mem 0x000c0000-0x000c3fff window][ 0.888544] pnp 00:00: [mem 0x000c4000-0x000c7fff window][ 0.888547] pnp 00:00: [mem 0x000c8000-0x000cbfff window][ 0.888551] pnp 00:00: [mem 0x000cc000-0x000cffff window][ 0.888554] pnp 00:00: [mem 0x000d0000-0x000d3fff window][ 0.888557] pnp 00:00: [mem 0x000d4000-0x000d7fff window][ 0.888560] pnp 00:00: [mem 0x000d8000-0x000dbfff window][ 0.888564] pnp 00:00: [mem 0x000dc000-0x000dffff window][ 0.888567] pnp 00:00: [mem 0x000e0000-0x000e3fff window][ 0.888570] pnp 00:00: [mem 0x000e4000-0x000e7fff window][ 0.888573] pnp 00:00: [mem 0x000e8000-0x000ebfff window][ 0.888580] pnp 00:00: [mem 0x000ec000-0x000effff window][ 0.888583] pnp 00:00: [mem 0x000f0000-0x000fffff window][ 0.888587] pnp 00:00: [mem 0xbfa00000-0xfeafffff window][ 0.888590] pnp 00:00: [mem 0xfed40000-0xfed44fff window][ 0.888677] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)[ 0.888697] pnp 00:01: [io 0x0000-0x001f]

[ 0.888700] pnp 00:01: [io 0x0081-0x0091][ 0.888703] pnp 00:01: [io 0x0093-0x009f][ 0.888706] pnp 00:01: [io 0x00c0-0x00df][ 0.888709] pnp 00:01: [dma 4][ 0.888748] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.888848] pnp 00:02: [mem 0xfed00000-0xfed003ff][ 0.888887] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)[ 0.888902] pnp 00:03: [io 0x00f0][ 0.888913] pnp 00:03: [irq 13][ 0.888952] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)[ 0.888970] pnp 00:04: [io 0x002e-0x002f][ 0.888973] pnp 00:04: [io 0x004e-0x004f][ 0.888976] pnp 00:04: [io 0x0061]

[ 0.888978] pnp 00:04: [io 0x0063][ 0.888981] pnp 00:04: [io 0x0065][ 0.888983] pnp 00:04: [io 0x0067][ 0.888986] pnp 00:04: [io 0x0068][ 0.888988] pnp 00:04: [io 0x006c][ 0.888991] pnp 00:04: [io 0x0070][ 0.888993] pnp 00:04: [io 0x0080][ 0.888996] pnp 00:04: [io 0x0092][ 0.888998] pnp 00:04: [io 0x00b2-0x00b3][ 0.889001] pnp 00:04: [io 0x0680-0x069f][ 0.889004] pnp 00:04: [io 0x1000-0x1003][ 0.889007] pnp 00:04: [io 0x1004-0x1013][ 0.889009] pnp 00:04: [io 0xffff]

[ 0.889012] pnp 00:04: [io 0x0400-0x0453][ 0.889015] pnp 00:04: [io 0x0458-0x047f][ 0.889018] pnp 00:04: [io 0x0500-0x057f][ 0.889020] pnp 00:04: [io 0x164e-0x164f][ 0.889094] system 00:04: [io 0x0680-0x069f] has been reserved[ 0.889097] system 00:04: [io 0x1000-0x1003] has been reserved[ 0.889101] system 00:04: [io 0x1004-0x1013] has been reserved[ 0.889105] system 00:04: [io 0xffff] has been reserved[ 0.889108] system 00:04: [io 0x0400-0x0453] has been reserved[ 0.889112] system 00:04: [io 0x0458-0x047f] has been reserved


9/38

[ 0.889116] system 00:04: [io 0x0500-0x057f] has been reserved[ 0.889119] system 00:04: [io 0x164e-0x164f] has been reserved[ 0.889124] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.889136] pnp 00:05: [io 0x0070-0x0077][ 0.889143] pnp 00:05: [irq 8][ 0.889183] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.889223] pnp 00:06: [io 0x0454-0x0457][ 0.889282] system 00:06: [io 0x0454-0x0457] has been reserved[ 0.889287] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)[ 0.889338] pnp 00:07: [io 0x0060][ 0.889340] pnp 00:07: [io 0x0064][ 0.889347] pnp 00:07: [irq 1][ 0.889390] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)[ 0.889435] pnp 00:08: [irq 12][ 0.889477] pnp 00:08: Plug and Play ACPI device, IDs DLL04d8 PNP0f13 (active)[ 0.889641] pnp 00:09: [mem 0xfed1c000-0xfed1ffff][ 0.889645] pnp 00:09: [mem 0xfed10000-0xfed17fff][ 0.889648] pnp 00:09: [mem 0xfed18000-0xfed18fff][ 0.889651] pnp 00:09: [mem 0xfed19000-0xfed19fff][ 0.889654] pnp 00:09: [mem 0xf8000000-0xfbffffff][ 0.889657] pnp 00:09: [mem 0xfed20000-0xfed3ffff][ 0.889660] pnp 00:09: [mem 0xfed90000-0xfed93fff]

[ 0.889663] pnp 00:09: [mem 0xfed45000-0xfed8ffff][ 0.889666] pnp 00:09: [mem 0xff000000-0xffffffff][ 0.889669] pnp 00:09: [mem 0xfee00000-0xfeefffff][ 0.889672] pnp 00:09: [mem 0xfff00000-0xfff00fff][ 0.889740] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved[ 0.889744] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved[ 0.889748] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved[ 0.889752] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved[ 0.889756] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved[ 0.889762] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved[ 0.889766] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved[ 0.889770] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved[ 0.889774] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved

[ 0.889778] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved[ 0.889783] system 00:09: [mem 0xfff00000-0xfff00fff] has been reserved[ 0.889787] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.890124] pnp: PnP ACPI: found 10 devices[ 0.890127] ACPI: ACPI bus type pnp unregistered[ 0.890131] PnPBIOS: Disabled by ACPI PNP[ 0.927119] pci 0000:00:1c.0: PCI bridge to [bus 01-01][ 0.927122] pci 0000:00:1c.0: bridge window [io disabled][ 0.927132] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff][ 0.927138] pci 0000:00:1c.0: bridge window [mem pref disabled][ 0.927149] pci 0000:00:1c.2: PCI bridge to [bus 02-02][ 0.927152] pci 0000:00:1c.2: bridge window [io disabled][ 0.927161] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff]

[ 0.927167] pci 0000:00:1c.2: bridge window [mem pref disabled][ 0.927178] pci 0000:00:1c.4: PCI bridge to [bus 03-03][ 0.927183] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff][ 0.927191] pci 0000:00:1c.4: bridge window [mem disabled][ 0.927198] pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff 64bit pref][ 0.927209] pci 0000:00:1c.5: PCI bridge to [bus 04-08][ 0.927214] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff][ 0.927222] pci 0000:00:1c.5: bridge window [mem 0xd0d00000-0xd14fffff][ 0.927229] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd0cfffff 64bi


10/38

t pref][ 0.927259] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 0.927267] pci 0000:00:1c.0: setting latency timer to 64[ 0.927282] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[ 0.927289] pci 0000:00:1c.2: setting latency timer to 64[ 0.927299] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 0.927306] pci 0000:00:1c.4: setting latency timer to 64[ 0.927320] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17[ 0.927326] pci 0000:00:1c.5: setting latency timer to 64[ 0.927332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7][ 0.927336] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff][ 0.927339] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff][ 0.927343] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff][ 0.927346] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff][ 0.927350] pci_bus 0000:01: resource 1 [mem 0xd1600000-0xd16fffff][ 0.927353] pci_bus 0000:02: resource 1 [mem 0xd1500000-0xd15fffff][ 0.927356] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff][ 0.927360] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref][ 0.927363] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff][ 0.927367] pci_bus 0000:04: resource 1 [mem 0xd0d00000-0xd14fffff][ 0.927370] pci_bus 0000:04: resource 2 [mem 0xd0500000-0xd0cfffff 64bit pref][ 0.927414] NET: Registered protocol family 2

[ 0.927510] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.927841] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.928204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)[ 0.928388] TCP: Hash tables configured (established 131072 bind 65536)[ 0.928391] TCP reno registered[ 0.928395] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 0.928402] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 0.928536] NET: Registered protocol family 1[ 0.928552] pci 0000:00:02.0: Boot video device[ 0.930692] pci 0000:02:00.0: xHCI HW did not halt within 2000 usec status =0x0[ 0.930706] PCI: CLS 64 bytes, default 64

[ 0.930736] Simple Boot Flag at 0x66 set to 0x1[ 0.931192] cpufreq-nforce2: No nForce2 chipset.[ 0.931428] audit: initializing netlink socket (disabled)[ 0.931438] type=2000 audit(1366752893.572:1): initialized[ 0.944007] highmem bounce pool size: 64 pages[ 0.944014] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 0.946468] VFS: Disk quotas dquot_6.5.2[ 0.946547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.947454] fuse init (API version 7.16)[ 0.947600] msgmni has been set to 1555[ 0.947875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 0.947903] io scheduler noop registered

[ 0.947905] io scheduler deadline registered[ 0.947924] io scheduler cfq registered (default)[ 0.948373] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 0.948412] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[ 0.948498] intel_idle: MWAIT substates: 0x21120[ 0.948500] intel_idle: v0.4 model 0x2A[ 0.948502] intel_idle: lapic_timer_reliable_states 0xffffffff[ 0.949382] Freeing initrd memory: 12524k freed[ 1.047445] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared


11/38

[ 1.147275] ACPI: AC Adapter [ADP0] (on-line)[ 1.147398] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0[ 1.147402] ACPI: Power Button [PWRB][ 1.147439] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1[ 1.147442] ACPI: Sleep Button [SLPB][ 1.147479] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2[ 1.151272] ACPI: Lid Switch [LID0][ 1.151351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3[ 1.151354] ACPI: Power Button [PWRF][ 1.151486] ACPI: acpi_idle yielding to intel_idle[ 1.152966] thermal LNXTHERM:00: registered as thermal_zone0[ 1.152969] ACPI: Thermal Zone [TZ00] (45 C)[ 1.153142] thermal LNXTHERM:01: registered as thermal_zone1[ 1.153144] ACPI: Thermal Zone [TZ01] (45 C)[ 1.153187] ERST: Table is not found![ 1.153248] isapnp: Scanning for PnP cards...[ 1.153288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[ 1.164475] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared[ 1.164482] ACPI: Battery Slot [BAT0] (battery present)

[ 1.506619] isapnp: No Plug & Play device found[ 1.508281] Linux agpgart interface v0.103[ 1.508372] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset[ 1.508432] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable[ 1.509359] agpgart-intel 0000:00:00.0: detected 65536K stolen memory[ 1.509468] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000[ 1.510527] brd: module loaded[ 1.511039] loop: module loaded[ 1.511126] i2c-core: driver [adp5520] using legacy suspend method[ 1.511127] i2c-core: driver [adp5520] using legacy resume method[ 1.511566] Fixed MDIO Bus: probed[ 1.511595] PPP generic driver version 2.4.2

[ 1.511628] tun: Universal TUN/TAP device driver, 1.6[ 1.511629] tun: (C) 1999-2004 Max Krasnyansky [ 1.511701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.511717] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 1.511732] ehci_hcd 0000:00:1a.0: setting latency timer to 64[ 1.511736] ehci_hcd 0000:00:1a.0: EHCI Host Controller[ 1.511765] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1[ 1.511819] ehci_hcd 0000:00:1a.0: debug port 2[ 1.515712] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported[ 1.515728] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd170a000[ 1.530660] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00[ 1.530830] hub 1-0:1.0: USB hub found

[ 1.530834] hub 1-0:1.0: 2 ports detected[ 1.530895] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23[ 1.530907] ehci_hcd 0000:00:1d.0: setting latency timer to 64[ 1.530910] ehci_hcd 0000:00:1d.0: EHCI Host Controller[ 1.530941] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2[ 1.530988] ehci_hcd 0000:00:1d.0: debug port 2[ 1.534885] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported[ 1.534898] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd1709000[ 1.550629] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00


12/38

[ 1.550786] hub 2-0:1.0: USB hub found[ 1.550789] hub 2-0:1.0: 2 ports detected[ 1.550840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 1.550851] uhci_hcd: USB Universal Host Controller Interface driver[ 1.550919] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[ 1.558291] serio: i8042 KBD port at 0x60,0x64 irq 1[ 1.558296] serio: i8042 AUX port at 0x60,0x64 irq 12[ 1.558410] mousedev: PS/2 mouse device common for all mice[ 1.558568] rtc_cmos 00:05: RTC can wake from S4[ 1.558690] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0[ 1.558717] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs[ 1.558781] device-mapper: uevent: version 1.0.3[ 1.558849] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected][ 1.558901] device-mapper: multipath: version 1.2.0 loaded[ 1.558904] device-mapper: multipath round-robin: version 1.0.0 loaded[ 1.558958] EISA: Probing bus 0 at eisa.0[ 1.558960] EISA: Cannot allocate resource for mainboard[ 1.558962] Cannot allocate resource for EISA slot 1[ 1.558964] Cannot allocate resource for EISA slot 2[ 1.558966] Cannot allocate resource for EISA slot 3[ 1.558967] Cannot allocate resource for EISA slot 4[ 1.558969] Cannot allocate resource for EISA slot 5

[ 1.558971] Cannot allocate resource for EISA slot 6[ 1.558973] Cannot allocate resource for EISA slot 7[ 1.558975] Cannot allocate resource for EISA slot 8[ 1.558976] EISA: Detected 0 cards.[ 1.559164] cpuidle: using governor ladder[ 1.559405] cpuidle: using governor menu[ 1.559601] TCP cubic registered[ 1.559708] NET: Registered protocol family 10[ 1.560129] NET: Registered protocol family 17[ 1.560142] Registering the dns_resolver key type[ 1.560840] Using IPI No-Shortcut mode[ 1.560899] PM: Hibernation image not present or could not be loaded.[ 1.560907] registered taskstats version 1

[ 1.561164] Magic number: 9:972:601[ 1.561238] rtc_cmos 00:05: setting system clock to 2013-04-23 21:34:55 UTC (1366752895)[ 1.561240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 1.561241] EDD information not available.[ 1.561433] Freeing unused kernel memory: 720k freed[ 1.561631] Write protecting the kernel text: 5376k[ 1.561698] Write protecting the kernel read-only data: 2196k[ 1.561699] NX-protecting the kernel data: 4864k[ 1.564606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4[ 1.576413] udev[71]: starting version 167[ 1.809234] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 1.809259] xhci_hcd 0000:02:00.0: setting latency timer to 64[ 1.809265] xhci_hcd 0000:02:00.0: xHCI Host Controller[ 1.809323] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3[ 1.815497] ahci 0000:00:1f.2: version 3.0[ 1.815518] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19[ 1.815564] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X[ 1.815610] ahci: SSS flag set, parallel bus scan disabled[ 1.815957] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded[ 1.815971] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16


13/38

[ 1.816005] r8169 0000:03:00.0: setting latency timer to 64[ 1.816011] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, usingfamily default[ 1.816070] r8169 0000:03:00.0: irq 41 for MSI/MSI-X[ 1.816401] r8169 0000:03:00.0: eth0: RTL8101e at 0xf8468000, 14:fe:b5:c0:31:e1, XID 00a00000 IRQ 41[ 1.822584] xhci_hcd 0000:02:00.0: irq 18, io mem 0xd1500000[ 1.822665] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X[ 1.822673] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X[ 1.822679] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X[ 1.822685] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X[ 1.822690] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X[ 1.825880] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values[ 1.825963] xHCI xhci_add_endpoint called for root hub[ 1.825965] xHCI xhci_check_bandwidth called for root hub[ 1.825990] hub 3-0:1.0: USB hub found[ 1.825994] hub 3-0:1.0: 4 ports detected[ 1.830287] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode[ 1.830298] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slumpart ems sxs apst[ 1.830310] ahci 0000:00:1f.2: setting latency timer to 64[ 1.842294] usb 1-1: new high speed USB device using ehci_hcd and address 2

[ 1.846887] scsi0 : ahci[ 1.847038] scsi1 : ahci[ 1.847174] scsi2 : ahci[ 1.847300] scsi3 : ahci[ 1.847430] scsi4 : ahci[ 1.847511] scsi5 : ahci[ 1.847604] ata1: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708100 irq40[ 1.847607] ata2: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708180 irq40[ 1.847609] ata3: DUMMY[ 1.847610] ata4: DUMMY[ 1.847612] ata5: SATA max UDMA/133 abar m2048@0xd1708000 port 0xd1708300 irq

40[ 1.847613] ata6: DUMMY[ 1.926156] Refined TSC clocksource calibration: 2292.553 MHz.[ 1.926170] Switching to clocksource tsc[ 1.974745] hub 1-1:1.0: USB hub found[ 1.974840] hub 1-1:1.0: 6 ports detected[ 2.085942] usb 2-1: new high speed USB device using ehci_hcd and address 2[ 2.165806] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)[ 2.218381] hub 2-1:1.0: USB hub found[ 2.218476] hub 2-1:1.0: 8 ports detected[ 2.229740] ata1.00: ATA-8: ST9640320AS, 0002DEM1, max UDMA/133[ 2.229750] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)[ 2.273439] ata1.00: configured for UDMA/133

[ 2.273646] scsi 0:0:0:0: Direct-Access ATA ST9640320AS 0002 PQ: 0 ANSI: 5[ 2.273804] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596GiB)[ 2.273813] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 2.273873] sd 0:0:0:0: [sda] Write Protect is off[ 2.273876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.273920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 2.329581] usb 3-4: new high speed USB device using xhci_hcd and address 2


14/38

[ 2.333944] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >[ 2.334391] sd 0:0:0:0: [sda] Attached SCSI disk[ 2.347286] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep[ 2.347654] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep[ 2.348028] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep[ 2.348390] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep[ 2.352000] usbcore: registered new interface driver uas[ 2.421635] usb 1-1.1: new high speed USB device using ehci_hcd and address 3[ 2.536899] Initializing USB Mass Storage driver...[ 2.537014] scsi6 : usb-storage 3-4:1.0[ 2.537133] scsi7 : usb-storage 1-1.1:1.0[ 2.537256] usbcore: registered new interface driver usb-storage[ 2.537258] USB Mass Storage support registered.[ 2.593164] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 2.595659] ata2.00: ATAPI: PLDS DVDRW/BDROM DS-6E2SH, CD11, max UDMA/100[ 2.597221] ata2.00: configured for UDMA/100[ 2.601231] usb 1-1.4: new high speed USB device using ehci_hcd and address 4[ 2.602934] scsi 1:0:0:0: CD-ROM PLDS DVDRWBD DS-6E2SH CD11 PQ: 0 ANSI: 5[ 2.607524] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cddatray[ 2.607533] cdrom: Uniform CD-ROM driver Revision: 3.20[ 2.607743] sr 1:0:0:0: Attached scsi CD-ROM sr0[ 2.607837] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 2.924676] ata5: SATA link down (SStatus 0 SControl 300)[ 3.060499] usb 2-1.3: new full speed USB device using ehci_hcd and address 3[ 3.170279] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5[ 3.170387] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0[ 3.172831] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6[ 3.173040] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1[ 3.173110] usbcore: registered new interface driver usbhid[ 3.173113] usbhid: USB HID core driver[ 3.228249] usb 2-1.5: new full speed USB device using ehci_hcd and address 4

[ 3.532715] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5[ 3.533108] sd 6:0:0:0: Attached scsi generic sg2 type 0[ 3.533262] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9GiB)[ 3.534342] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint[ 3.535001] sd 6:0:0:0: [sdb] Write Protect is off[ 3.535004] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00[ 3.535006] sd 6:0:0:0: [sdb] Assuming drive cache: write through[ 3.535652] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint[ 3.536664] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint[ 3.537239] sd 6:0:0:0: [sdb] Assuming drive cache: write through[ 3.538023] sdb: sdb1

[ 3.538568] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint[ 3.538666] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS[ 3.539055] sd 7:0:0:0: Attached scsi generic sg3 type 0[ 3.539092] sd 6:0:0:0: [sdb] Assuming drive cache: write through[ 3.539096] sd 6:0:0:0: [sdb] Attached SCSI removable disk[ 3.725418] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:(null)[ 4.489370] sd 7:0:0:0: [sdc] 129759232 512-byte logical blocks: (66.4 GB/61.8 GiB)


15/38

[ 4.490229] sd 7:0:0:0: [sdc] Write Protect is off[ 4.490270] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00[ 4.490278] sd 7:0:0:0: [sdc] Assuming drive cache: write through[ 4.492721] sd 7:0:0:0: [sdc] Assuming drive cache: write through[ 4.493974] sdc: sdc1[ 4.495975] sd 7:0:0:0: [sdc] Assuming drive cache: write through[ 4.495978] sd 7:0:0:0: [sdc] Attached SCSI removable disk[ 22.813031] udev[312]: starting version 167[ 22.826412] lp: driver loaded but no devices found[ 22.913176] Adding 6202364k swap on /dev/sda6. Priority:-1 extents:1 across:6202364k[ 23.084195] type=1400 audit(1366770917.052:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=479 comm="apparmor_parser"[ 23.085015] type=1400 audit(1366770917.052:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=479 comm="apparmor_parser"[ 23.085545] type=1400 audit(1366770917.052:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=479 comm="apparmor_parser"[ 23.086979] [drm] Initialized drm 1.1.0 20060810[ 23.118032] cfg80211: Calling CRDA to update world regulatory domain[ 23.183004] Linux video capture interface: v2.00[ 23.187781] Bluetooth: Core ver 2.15[ 23.187806] NET: Registered protocol family 31

[ 23.187807] Bluetooth: HCI device and connection manager initialized[ 23.187810] Bluetooth: HCI socket layer initialized[ 23.190677] Bluetooth: Generic Bluetooth USB driver ver 0.6[ 23.191978] usbcore: registered new interface driver btusb[ 23.200159] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf:2b80)[ 23.231785] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro[ 23.246902] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)[ 23.248193] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7[ 23.248328] usbcore: registered new interface driver uvcvideo[ 23.248331] USB Video Class driver (v1.0.0)

[ 23.249860] input: Dell WMI hotkeys as /devices/virtual/input/input8[ 23.258156] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 23.258161] i915 0000:00:02.0: setting latency timer to 64[ 23.279879] i915 0000:00:02.0: irq 47 for MSI/MSI-X[ 23.279885] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).[ 23.279887] [drm] Driver supports precise vblank timestamp query.[ 23.287636] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:[ 23.287639] iwlagn: Copyright(c) 2003-2010 Intel Corporation[ 23.287745] iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 23.287800] iwlagn 0000:01:00.0: setting latency timer to 64[ 23.287875] iwlagn 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0

[ 23.303995] iwlagn 0000:01:00.0: device EEPROM VER=0x71a, CALIB=0x6[ 23.303998] iwlagn 0000:01:00.0: Device SKU: 0X9[ 23.304001] iwlagn 0000:01:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3[ 23.304025] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels[ 23.304348] iwlagn 0000:01:00.0: irq 48 for MSI/MSI-X[ 23.357452] iwlagn 0000:01:00.0: loaded firmware version 17.168.5.2 build 35905[ 23.357764] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain


16/38

[ 23.360874] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 23.360879] cfg80211: World regulatory domain updated:[ 23.360880] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 23.360883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 23.360886] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 23.360889] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 23.360892] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 23.360894] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 23.368386] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'[ 23.377977] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem[ 23.475977] alps.c: Enabled hardware quirk, falling back to psmouse-core[ 23.492667] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9[ 23.558796] fbcon: inteldrmfb (fb0) is primary device[ 23.558926] Console: switching to colour frame buffer device 200x56[ 23.558963] fb0: inteldrmfb frame buffer device

[ 23.558965] drm: registered panic notifier[ 23.586720] acpi device:28: registered as cooling_device4[ 23.587545] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10[ 23.587676] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)[ 23.587890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0[ 23.587935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22[ 23.587997] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X[ 23.588026] HDA Intel 0000:00:1b.0: setting latency timer to 64[ 23.610835] type=1400 audit(1366770917.580:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=831 comm="apparmor

_parser"

[ 23.611553] type=1400 audit(1366770917.580:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=835 comm="apparmor_parser"[ 23.611821] type=1400 audit(1366770917.580:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=832 comm="apparmor_parser"[ 23.614103] type=1400 audit(1366770917.584:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=836 comm="apparmor_parser"[ 23.614306] type=1400 audit(1366770917.584:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=839 comm="apparmor_parser"[ 23.615021] type=1400 audit(1366770917.584:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=836 comm="apparmor_parser"[ 23.616661] type=1400 audit(1366770917.584:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 co

mm="apparmor_parser"[ 23.878345] ADDRCONF(NETDEV_UP): wlan0: link is not ready[ 23.922227] r8169 0000:03:00.0: eth0: link down[ 23.922360] ADDRCONF(NETDEV_UP): eth0: link is not ready[ 24.136692] hda_codec: ALC269VB: BIOS auto-probing.[ 24.146173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11[ 24.146262] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12[ 25.196368] /dev/vmmon[1082]: Module vmmon: registered with major=10 minor=16


17/38

5[ 25.196376] /dev/vmmon[1082]: Initial HV check: anyNotCapable=0 anyUnlocked=0anyEnabled=1 anyDisabled=0[ 25.196382] /dev/vmmon[1082]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0[ 25.196384] /dev/vmmon[1082]: Module vmmon: initialized[ 25.204239] [1091]: VMCI: shared components initialized.[ 25.204272] [1091]: VMCI: host components initialized.[ 25.204333] [1091]: VMCI: Module registered (name=vmci,major=10,minor=56).[ 25.204336] [1091]: VMCI: Using host personality[ 25.204338] [1091]: VMCI: Module (name=vmci) is initialized[ 25.207523] ppdev: user-space parallel port driver[ 25.908201] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 25.910771] wlan0: authenticated[ 25.911021] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 25.914792] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 25.914799] wlan0: associated[ 25.923878] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready[ 25.923955] cfg80211: Calling CRDA for country: CN[ 25.926410] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926413] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926415] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz

width channel with regulatory rule:[ 25.926417] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926418] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926420] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926421] cfg80211: Updating information on frequency 2427 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926423] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926424] cfg80211: Updating information on frequency 2432 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926428] cfg80211: Updating information on frequency 2437 MHz for a 20 MHzwidth channel with regulatory rule:

[ 25.926429] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926431] cfg80211: Updating information on frequency 2442 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926433] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926434] cfg80211: Updating information on frequency 2447 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926436] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926437] cfg80211: Updating information on frequency 2452 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926439] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926440] cfg80211: Updating information on frequency 2457 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926442] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 25.926444] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926445] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926447] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926448] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926450] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 25.926452] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 25.926454] cfg80211: Regulatory domain changed to country: CN


18/38

[ 25.926455] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 25.926457] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)[ 25.926459] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 26.134159] /dev/vmnet: open called by PID 1226 (vmnet-netifup)[ 26.134165] /dev/vmnet: hub 1 does not exist, allocating memory.[ 26.134179] /dev/vmnet: port on hub 1 successfully opened[ 26.170366] Intel AES-NI instructions are not detected.[ 26.191001] padlock_aes: VIA PadLock not detected.[ 26.215709] /dev/vmnet: open called by PID 1173 (vmnet-bridge)[ 26.215717] /dev/vmnet: hub 0 does not exist, allocating memory.[ 26.215739] /dev/vmnet: port on hub 0 successfully opened[ 26.215750] bridge-wlan0: device is wireless, enabling SMAC[ 26.215754] bridge-wlan0: up[ 26.215756] bridge-wlan0: attached[ 26.420128] /dev/vmnet: open called by PID 1228 (vmnet-dhcpd)[ 26.420147] /dev/vmnet: port on hub 1 successfully opened[ 26.422992] /dev/vmnet: open called by PID 1245 (vmnet-natd)[ 26.422998] /dev/vmnet: hub 8 does not exist, allocating memory.[ 26.423012] /dev/vmnet: port on hub 8 successfully opened[ 26.423786] userif-3: sent link down event.[ 26.423788] userif-3: sent link up event.

[ 26.424675] /dev/vmnet: open called by PID 1246 (vmnet-netifup)[ 26.424682] /dev/vmnet: port on hub 8 successfully opened[ 26.505303] /dev/vmnet: open called by PID 1250 (vmnet-dhcpd)[ 26.505315] /dev/vmnet: port on hub 8 successfully opened[ 26.762228] Bluetooth: L2CAP ver 2.15[ 26.762231] Bluetooth: L2CAP socket layer initialized[ 26.770414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 26.770418] Bluetooth: BNEP filters: protocol multicast[ 26.775648] Bluetooth: SCO (Voice Link) ver 0.6[ 26.775651] Bluetooth: SCO socket layer initialized[ 26.922679] Bluetooth: RFCOMM TTY layer initialized[ 26.922684] Bluetooth: RFCOMM socket layer initialized[ 26.922686] Bluetooth: RFCOMM ver 1.11

[ 27.628088] userif-3: sent link down event.[ 27.628092] userif-3: sent link up event.[ 33.928166] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because load = 5[ 36.610501] wlan0: no IPv6 routers present[ 36.642405] vmnet8: no IPv6 routers present[ 36.714341] vmnet1: no IPv6 routers present[ 38.090959] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0[ 44.881518] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because load = 0[ 52.894361] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because load = 7[ 56.829661] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because lo

ad = 10[ 62.809877] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because load = 2[ 66.969333] iwlagn 0000:01:00.0: iwlagn_tx_agg_start on ra = c8:3a:35:3c:79:90 tid = 0[ 239.176250] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 299.207586] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 458.972962] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 525.467672] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 648.122078] iwlagn 0000:01:00.0: receive reply tx with bt_kill


19/38

[ 724.834504] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 763.164904] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 850.064039] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 865.401712] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 991.951016] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 993.213617] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1098.036222] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1127.450938] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1243.743760] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1386.875732] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1389.432168] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1399.656657] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1429.067598] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1438.000567] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1438.013805] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1531.316149] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1601.600292] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1703.851255] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1754.974975] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1760.124997] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1778.006223] iwlagn 0000:01:00.0: receive reply tx with bt_kill[ 1812.243423] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)[ 1812.243745] bridge-wlan0: disabling the bridge[ 1812.259271] iwlagn 0000:01:00.0: Stopping AGG while state not ON or starting

[ 1812.272478] bridge-wlan0: down[ 1812.272495] bridge-wlan0: detached[ 1812.365866] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1812.365882] cfg80211: Restoring regulatory settings[ 1812.365893] cfg80211: Calling CRDA to update world regulatory domain[ 1812.372678] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1812.372689] cfg80211: World regulatory domain updated:[ 1812.372693] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1812.372701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)

[ 1812.372707] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1812.372713] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1812.372718] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1812.372724] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1812.443418] userif-3: sent link down event.[ 1812.443422] userif-3: sent link up event.[ 1813.103862] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1813.123024] wlan0: authenticated[ 1813.123195] wlan0: associate with c8:3a:35:3c:79:90 (try 1)

[ 1813.244541] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1813.244553] wlan0: associated[ 1813.254723] cfg80211: Calling CRDA for country: CN[ 1813.262373] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262383] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262388] cfg80211: Updating information on frequency 2417 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262395] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)


20/38

[ 1813.262400] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262405] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262410] cfg80211: Updating information on frequency 2427 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262416] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262421] cfg80211: Updating information on frequency 2432 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262427] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262432] cfg80211: Updating information on frequency 2437 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262438] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262442] cfg80211: Updating information on frequency 2442 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262448] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262453] cfg80211: Updating information on frequency 2447 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262459] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262464] cfg80211: Updating information on frequency 2452 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262470] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262475] cfg80211: Updating information on frequency 2457 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262481] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 1813.262486] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262491] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262496] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262502] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262507] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1813.262513] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1813.262520] cfg80211: Regulatory domain changed to country: CN[ 1813.262524] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1813.262530] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

mBm)[ 1813.262536] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1819.425701] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)[ 1819.458069] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1819.458083] cfg80211: Restoring regulatory settings[ 1819.458094] cfg80211: Calling CRDA to update world regulatory domain[ 1819.466056] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1819.466068] cfg80211: World regulatory domain updated:[ 1819.466072] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 1819.466080] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1819.466086] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1819.466092] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1819.466097] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1819.466103] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)


21/38

[ 1820.143688] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1820.156409] wlan0: authenticated[ 1820.156658] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1820.243153] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1820.243165] wlan0: associated[ 1820.255293] cfg80211: Calling CRDA for country: CN[ 1820.261907] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261910] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261912] cfg80211: Updating information on frequency 2417 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261914] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261915] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261918] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261919] cfg80211: Updating information on frequency 2427 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261922] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261924] cfg80211: Updating information on frequency 2432 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261927] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261929] cfg80211: Updating information on frequency 2437 MHz for a 20 MHzwidth channel with regulatory rule:


[ 1820.261946] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261960] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261965] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261971] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261976] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1820.261982] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1820.261990] cfg80211: Regulatory domain changed to country: CN[ 1820.261994] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1820.261999] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000

mBm)[ 1820.262005] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1826.428493] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)[ 1826.467672] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1826.467685] cfg80211: Restoring regulatory settings[ 1826.467695] cfg80211: Calling CRDA to update world regulatory domain[ 1826.477429] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain


22/38

[ 1826.477445] cfg80211: World regulatory domain updated:[ 1826.477452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1826.477463] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1826.477472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1826.477482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1826.477490] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1826.477500] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1827.156013] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1827.220364] wlan0: authenticated[ 1827.222078] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1827.314489] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1827.314493] wlan0: associated[ 1827.324763] cfg80211: Calling CRDA for country: CN[ 1827.331195] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1827.331205] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1827.331211] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz



[ 1827.331309] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1827.331315] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1827.331320] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 1827.331325] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1827.331330] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1827.331336] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1827.331344] cfg80211: Regulatory domain changed to country: CN


23/38

[ 1827.331347] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1827.331353] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)[ 1827.331359] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1827.842305] wlan0: deauthenticating from c8:3a:35:3c:79:90 by local choice (reason=3)[ 1827.877487] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1827.877492] cfg80211: Restoring regulatory settings[ 1827.877496] cfg80211: Calling CRDA to update world regulatory domain[ 1827.880155] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1827.880159] cfg80211: World regulatory domain updated:[ 1827.880160] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1827.880163] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1827.880165] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1827.880166] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1827.880168] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)[ 1827.880170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1828.103074] userif-3: sent link down event.[ 1828.103081] userif-3: sent link up event.[ 1828.538439] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1828.610724] wlan0: authenticated[ 1828.612480] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1828.777905] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1828.777918] wlan0: associated[ 1828.785966] cfg80211: Calling CRDA for country: CN[ 1828.788686] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz


[ 1828.788702] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788704] cfg80211: Updating information on frequency 2437 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788705] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788707] cfg80211: Updating information on frequency 2442 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788708] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788710] cfg80211: Updating information on frequency 2447 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788712] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)


24/38

[ 1828.788713] cfg80211: Updating information on frequency 2452 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788715] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788716] cfg80211: Updating information on frequency 2457 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788718] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788720] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788721] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788723] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788725] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788726] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1828.788728] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1828.788730] cfg80211: Regulatory domain changed to country: CN[ 1828.788731] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1828.788733] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)[ 1828.788735] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1830.675199] /dev/vmnet: open called by PID 1173 (vmnet-bridge)[ 1830.675212] /dev/vmnet: hub 0 does not exist, allocating memory.

[ 1830.675244] /dev/vmnet: port on hub 0 successfully opened[ 1830.675257] bridge-wlan0: device is wireless, enabling SMAC[ 1830.675262] bridge-wlan0: up[ 1830.675576] bridge-wlan0: attached[ 1830.874803] userif-3: sent link down event.[ 1830.874806] userif-3: sent link up event.[ 1845.090203] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)[ 1845.090962] bridge-wlan0: disabling the bridge[ 1845.119630] bridge-wlan0: down[ 1845.119647] bridge-wlan0: detached[ 1845.169259] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1845.169280] cfg80211: Restoring regulatory settings

[ 1845.169295] cfg80211: Calling CRDA to update world regulatory domain[ 1845.178251] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1845.178263] cfg80211: World regulatory domain updated:[ 1845.178268] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1845.178275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1845.178282] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1845.178287] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1845.178293] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)[ 1845.178298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1845.290571] userif-3: sent link down event.[ 1845.290579] userif-3: sent link up event.[ 1845.867999] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1845.948248] wlan0: authenticated[ 1845.951034] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1846.098223] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)


25/38

[ 1846.098234] wlan0: associated[ 1846.111749] cfg80211: Calling CRDA for country: CN[ 1846.118622] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118632] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118638] cfg80211: Updating information on frequency 2417 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118644] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118649] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118655] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118660] cfg80211: Updating information on frequency 2427 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118666] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118671] cfg80211: Updating information on frequency 2432 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118677] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118682] cfg80211: Updating information on frequency 2437 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118688] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118692] cfg80211: Updating information on frequency 2442 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118698] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118703] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz


[ 1846.118752] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118757] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1846.118762] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1846.118770] cfg80211: Regulatory domain changed to country: CN[ 1846.118773] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1846.118779] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)[ 1846.118785] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1852.364852] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 15)[ 1852.376025] cfg80211: All devices are disconnected, going to restore regulato

ry settings[ 1852.376039] cfg80211: Restoring regulatory settings[ 1852.376049] cfg80211: Calling CRDA to update world regulatory domain[ 1852.383856] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1852.383868] cfg80211: World regulatory domain updated:[ 1852.383872] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1852.383879] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)


26/38

[ 1852.383886] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1852.383892] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1852.383898] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1852.383903] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1853.009240] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1853.061033] wlan0: authenticated[ 1853.062727] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1853.259528] wlan0: associate with c8:3a:35:3c:79:90 (try 2)[ 1853.287832] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1853.287844] wlan0: associated[ 1853.303044] cfg80211: Calling CRDA for country: CN[ 1853.311095] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311105] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311111] cfg80211: Updating information on frequency 2417 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311117] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311122] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:


[ 1853.311176] cfg80211: Updating information on frequency 2447 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311182] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311187] cfg80211: Updating information on frequency 2452 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311193] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311198] cfg80211: Updating information on frequency 2457 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311204] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311209] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311215] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311220] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz

width channel with regulatory rule:[ 1853.311225] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311230] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1853.311236] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1853.311244] cfg80211: Regulatory domain changed to country: CN[ 1853.311247] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1853.311253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)


27/38

[ 1853.311259] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000mBm)[ 1856.318083] /dev/vmnet: open called by PID 1173 (vmnet-bridge)[ 1856.318109] /dev/vmnet: hub 0 does not exist, allocating memory.[ 1856.318184] /dev/vmnet: port on hub 0 successfully opened[ 1856.318214] bridge-wlan0: device is wireless, enabling SMAC[ 1856.318227] bridge-wlan0: up[ 1856.318236] bridge-wlan0: attached[ 1856.517974] userif-3: sent link down event.[ 1856.517984] userif-3: sent link up event.[ 1857.476244] iwlagn 0000:01:00.0: Aggregation not enabled for tid 0 because load = 2[ 1869.184002] wlan0: deauthenticated from c8:3a:35:3c:79:90 (Reason: 3)[ 1869.189345] bridge-wlan0: disabling the bridge[ 1869.190319] bridge-wlan0: down[ 1869.190334] bridge-wlan0: detached[ 1869.204318] cfg80211: All devices are disconnected, going to restore regulatory settings[ 1869.204333] cfg80211: Restoring regulatory settings[ 1869.204344] cfg80211: Calling CRDA to update world regulatory domain[ 1869.212386] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain[ 1869.212397] cfg80211: World regulatory domain updated:[ 1869.212401] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_g

ain, max_eirp)[ 1869.212409] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1869.212415] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1869.212421] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,2000 mBm)[ 1869.212426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1869.212432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,2000 mBm)[ 1869.388935] userif-3: sent link down event.[ 1869.388944] userif-3: sent link up event.

[ 1869.872037] wlan0: authenticate with c8:3a:35:3c:79:90 (try 1)[ 1869.875206] wlan0: authenticated[ 1869.880233] wlan0: associate with c8:3a:35:3c:79:90 (try 1)[ 1869.885670] wlan0: RX AssocResp from c8:3a:35:3c:79:90 (capab=0x411 status=0aid=3)[ 1869.885675] wlan0: associated[ 1869.899143] cfg80211: Calling CRDA for country: CN[ 1869.902142] cfg80211: Updating information on frequency 2412 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902145] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902147] cfg80211: Updating information on frequency 2417 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902148] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)

[ 1869.902150] cfg80211: Updating information on frequency 2422 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902152] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902153] cfg80211: Updating information on frequency 2427 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902155] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902156] cfg80211: Updating information on frequency 2432 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902158] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902159] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz


28/38

width channel with regulatory rule:[ 1869.902161] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902163] cfg80211: Updating information on frequency 2442 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902164] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902166] cfg80211: Updating information on frequency 2447 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902168] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902169] cfg80211: Updating information on frequency 2452 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902171] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902172] cfg80211: Updating information on frequency 2457 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902174] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902175] cfg80211: Updating information on frequency 2462 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902177] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902179] cfg80211: Updating information on frequency 2467 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902180] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902182] cfg80211: Updating information on frequency 2472 MHz for a 20 MHzwidth channel with regulatory rule:[ 1869.902184] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)[ 1869.902186] cfg80211: Regulatory domain changed to country: CN

[ 1869.902187] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 1869.902189] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000mBm)[ 1869.902191] cfg8021

History of Bull

Documents

Transcript of History of Bull