product overview

Hip systems

©copyright information: mUtARs®, Aida®, ACs®, AJs®, Bicana® BethaLoc®, Capica®, CarpoFit®, Cepthar®, CCi®, DiaLoc®, ecoFit®, GenuX®, Gis®, LOAD sHiFt® , LUmiC®, metaLic®, polaric®, implavit®, implaFix®, implacross® and

implatan® are registered trademarks of implantcast GmbH. the use and copy of the content of this brochure is only al-lowed with prior permit given by implantcast GmbH. Additional printed trademarks are registered as following: ACCis® -

ACCis B.V. , BiOLOX® - Ceramtec AG,

11

table of ContentsimplaFix® cpti- and HA-coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2the ceramic tiNbN-coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

A hip stem systems A. 1 ACCis® Resurfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 A. 2 AiDA® short stem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A. 3 ecoFit®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 A. 4 DiaLoc® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 A. 5 ic straight stem type i and type ii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 A. 6 LOAD sHiFt® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 A. 7 Ceraco. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 A. 8 AJs®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 A. 9 Cortina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 A.10 mUtARs® Rs revision system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 A.11 ic-long stem and RpC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 A.12 DiaLoc® Rs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15B hip cup systems B. 1 ecoFit® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 B. 2 ecoFit® sC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 B. 3 DiaLoc® sC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 B. 4 ACCis® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 B. 5 Ceraco dysplasia & revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 B. 6 pe-Cup mueller ii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 B. 7 ic-reconstruction implants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19C hip heads C. 1 ACCis® heads modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 C. 2 polaric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20D additional items D. 1 ic-intramedullary plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 D. 2 ic-cement restrictor absorbable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 D. 3 ic-cerclage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 E catalogue information e. 1 Hip implants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 e. 2 Hip instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 e. 3 surgical techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Hip systems

2

implaFix® cpti- and HA-coating

Uncemented joint replacements have steadily increased since the 1970s. this is because the bone loss is lo-wer when compared to cemented prostheses. Cementless implants are particularly advantageous in younger patients where increased life expectancy increases the chance of revision surgery being required. the key to the success of this procedure is a stable oseointegration; this is mainly determined by surface structure, surface chemistry as well as good primary implant stability.it has been shown that when provided with a structured surface with a favourable pore size, bone cells will grow directly onto biocompatible materials such as titanium and its alloys.

Different processes for the structuring of bone growth on compatible implant surfaces have failed to provide the desired fatigue strength. these processes include: (a) sintered titanium beads whereby the thermal effect can reduce the fatigue resistance of titanium alloy implants by about one third (b) corund-blasted implants, where micro-cracks can reduce fatigue resistance by up to two thirds.

Unlike sintering or corund blasting, the process of producing porous structures using the titanium plasma spray (tps) process reduces the fatigue resistance to acceptable limits. in this procedure, a pure titanium coating is bonded to the implant, thus providing the bone with a surface that promotes osseointegration and bone growth. tps was first developed in the U.s. in the 1980s and has become particularly important because of the superior osseointegration provided by this type of thermal spray coating.

tps coatings are produced on implants in a vacuum chamber. An inert gas mixture (argon) is ionised in an ultra high temperature plasma flame. the gas heats up and expands rapidly being expelled at high speed through a nozzle shaped anode. At the same time titanium powder is injected into the plasma flame and this begins to melt. Flying at high speed, the molten titanium particles strike the substrate surface, cool quickly and fuse to the implant surface. the resultant porous layer is built up by multiple layers of particles. For HA coatings the tps process is also transacted with hydroxylapatite.

1 DOt GmbH: Firm fixation through the use of porous plasma-sprayed titanium coatings

fig. 2: detailed view of the implaFix® cpti coatingfig. 1: detailed view of the implaFix® HA coating

3

The TiNbN-coating optimizes the characteristics of metal-metal articulations

to reduce the disadvantages of surface carbides a ceramic coating may be used. Ceramics have the advantage of being extremely hard. the ACCis® total hip and surface replacement prosthetic components utilize the ceramic titanium-Niobium-Nitride to reinforce the articulating surface and to reduce wear of the Cobalt-Chromium-molybdenum alloy substrate. the titanium-Niobium-Nitride coating is very wear resistant, and as it is much harder than the block carbides it is capable of polishing the asperities off. the initial high wear of metal-on-metal articulations is considerably reduced. After the running in phase the opposing surfaces are completely smooth and show minimal wear.

the tiNbN coating has another advantage: while corrosion of the surface of the components is believed to be the most important factor in generating metal ions, the “sealing” of the components by the ceramic coating has a large influence on reducing the release of ions. this “sealing” of the components may possibly reduce the incidence of hypersensitivity. in vitro studies support this hypothesis.

the process we use is called physical Vapour Deposition (pVD). the value of pVD lies in its ability to modify the surface properties of a device without changing the underlying properties and biomechanical functionality. this pVD process can increase the Rockwell hardness of the surface, increase the „smoothness“, reduce the oxidation potential as well as reduce the coefficient of friction. With the pVD process the ceramic molecules penetrate the surface several atoms deep to increase the bonding strength.

ACCis® total Hips were first implanted in 2002 and the Resurfacing Hips in 2005 and have been subject of a clinical study. Of a total of over 200 resurfacing arthroplasties 60 patients were asked to donate 7ml of their blood for trace metal ion analysis. this was done before the opertion and then at 3, 6, 12 and 24 months postoperatively. All metal ion concentrations were measured by the university laboratory in Dresden, Germany. the graphic (fig. 4) with the metal ion values up to 2 years shows that there was virtually no increase of the metal ions. the light blue mark shows the levels of what is accepted as „normal levels“, the red dashed line is the mHRA (medicines and Healthcare products Regulatory Agency) warning level. Any patient who shows metal ions over this level should be monitored more closely.

2 Karel J. Hamelynck, David J. Woodnutt, Robin Rice, Genio Bongaerts: Ceramic surface engineering of the Articulating surfaces effectively mini-mizes Wear and Corrosion of metal-on-metal Hip prostheses; in: Knahr, K.: tribology in total Hip Arthroplasty

the ceramic tiNbN-coating

fig. 3: ACCis® Resurfacing, tiNbN-coated fig. 4: Result of the clinical study of ACCis® Resurfacing

4

ACCis® Resurfacing

A.1 ACCIS® ResurfacingDescription:the ACCis® Resurfacing is a bone saving implant system. the components of the hip system have a special ceramic surface (see also page 3), that protects the implants against metal wear and minimizes the metal ion release. each femoral size fits with 2 acetabular cup sizes. in case of intraoperative complications it is possible to switch to ACCis® Big heads (see picture on the right). the Big heads can be used with the same cups.material:CoCrmo (head and cup)Coating: tiNbN-coating, cpti-coating on the outer side of the cementless cupsize range: resurfacing heads in 10 sizes (38mm-58mm in 2mm steps)cementless cups in 20 sizes (42mm-64mm outer diameter) Big heads in 13 sizes (32 - 58mm in 2mm steps)

5

AiDA® short stem

A.2 AIDA® Short StemDescription:AiDA® is a bone saving cementless short stem system. the system is available in 9 sizes. two offset options enable the optimal reconstruction of the femur. proximally the stem offers the clinical established cpti- and HA-coating, the distal part is polished. the slim proximal design allows the implantation also at a small femur.material:implatan® tiAl6V4 forged alloy acc. to DiN isO 5832/3Coating: proximal cpti- and HA-Coating size range: each 9 sizes (standard and lateralized)CCD-angle:standard: 130°; lateralized: 125°

6

ecoFit® hip stem

A.3 EcoFit® Description:the ecoFit® total hip system includes a complete variety of cementless and cemented hip stems for the prima-ry treatment of the hip joint. Aside from the standard stem lateralized stems are available. the modular instru-mentation allows the adaptation to the patients’ anatomy and enables the surgeon to customize the treatment to the patient needs. Cementless stems are available with implaFix® cpti-coating as well as with implaFix® HA-coating.material:cementless : tiAl6V4 forged alloy acc. to DiN isO 5832/3cemented: CoCrmo casting alloy acc. to DiN isO 5832/4Coating: cementless: proximal implaFix® cpti-coatingcementless HA : proximal implaFix® cpti- and HA-coating cementless t-HA: proximal implaFix® cpti- and total HA-coating size Range: cementless: 10 sizescemented: 6 sizesCCD-angle: 138° standard and lateralized

7

DiaLoc® hip stem

A.1 DiaLoc®

Description:the DiaLoc® hip stem is a cementless hip stem. the conical, rectangular design of the DiaLoc® hip stem provi-des high rotational and primary stability. the cortical force transmission extends accross the metaphyseal and diaphyseal region of the femur. the anatomical design of the inward curved region of the stems supports the pressFit anchorage in the proximal femur. the dimensions of the DiaLoc® implants have been chosen to reach optimal fit to the anatomical occurences of the patients. the very rough surface of the stems consisting of a tiAl6Nb7 casting alloy supports the secondary osteointegration.material:tiAl6Nb7-forged alloy acc. to DiN isO 5832/11implant surface: corundum-blastedsize range: 12 sizes standard and 7 sizes lateralizedCCD-angle:standard: 131°; lateralized: 127°

8

ic-straight stem

A.5 ic-straight stem type I and type II Description:the ic-straight stem hip system consists of cemented hip stems for the primary treatment. Aside from the stan-dard stem lateralized stems are available. By the fine structure the surface of the implant is extended and the anchorage with bone cement optimized. the universal instruments enable a simple intraoperative change from the standard to the lateralized version.material:implavit® CoCrmo casting alloy acc. to DiN isO 5832/4size range: each 9 sizesCCD-angle:135° standard and lateralized

9

LOAD sHiFt® hip stem

A.8 LOAD SHIFT®

Description:the LOAD sHiFt® principle:in the early postoperative phase, an endoprosthesis introduced with a diaphyseal fit ensures sufficient primary stability, in order to allow bony ingrowth of the metaphyseal part of the prosthesis (meta-diaphyseal fixation). through suitable synthesis with bioabsorbable elements, further processing occurs with prostheses found in situ towards a change in the geometrical and biomechanical characteristics of the implant, and towards the abolition of diaphyseal fits, whereby a diaphyseal shift of the load transfer (LOAD sHiFt® effect) in the meta-physeal bones is achieved (metaphyseal fixation).material:tiAl6V4 forged alloy acc. to DiN isO 5832/3Coating: proximal implaFix® cpti- and HA-coating size range: 8 sizesCCD-angle:132°

10

Ceraco hip stem

A.8 CeracoDescription:the Ceraco stem system includes cementless and cemented hip stems. proximally the cementless version is coated with cpti. Both versions can be implanted with the same instrumentation. material:cementless : tiAl6V4 forged alloy acc. to DiN isO 5832/3cemented: CoCrmo casting alloy acc. to DiN isO 5832/4Coating: cementless: proximal cpti-Coating + tCp (Bonit®)size range: cementless: 8 sizescemented: 4 sizesCCD-angle:135°

11

AJs® hip stem

A.6 AJS®

Description:the AJs® hip system includes a complete variety of cementless and cemented hip stems for the primary treat-ment of the hip joint. the AJs® stem accommodates to the anatomy of the proximal femur of european patients in an optimal way. the design of the proximal stem ensures a brilliant primary stability with a solid, immediate fit. the tapered structure of the high polished distal part enables an optimal biomechanical settling of the pros-thesis and reduces the danger of stress-shielding. material:cementless : tiAl6V4 forged alloy acc. to DiN isO 5832/3cemented: CoCrmo casting alloy acc. to DiN isO 5832/4Coating: cementless: proximal implaFix® HA-coating size range: cementless: 9 sizescemented: 6 sizesCCD-angle:132°

12

Cortina hip stem

A.7 Cortina Description:the Cortina hip system is a cemented hip system. the collar enables the physiological force transmission. the slight neck offers a higher ROm. the anatomical design ensures additional rotational stability. the Cortina hip stem is available both in standard and lateralized version. Additionally all sizes are also available in length 170mm. Furthermore revision stems in length 200mm, 250mm and 300mm are available. the system also in-cludes stems with tiN-Coating.material:CoCrmo casting alloy acc. to DiN isO 5832/4Coating: all sizes available with tiN-coating size range: 10 standard sizes and 9 revision sizesCCD-angle:standard: 135°; lateralized 127°

13

mUtARs® Rs revision system

A.9 MUTARS® RS Description:the mUtARs® Rs system offers four different proximal components in length of 32 and 42 mm with a 12/14 taper. Both components are available in neck angles of 127° and 135°. metaphyseal components are available in lengths of 40 mm and 50 mm. to build an extra long stem, up to three extension pieces, each of 25 mm length are available. the modularity of these components allows the optimal adaptation to the proximal femur without changing of the diaphyseal stem position.material:cementless : tiAl6V4 forged alloy acc. to DiN isO 5832/3cemented: CoCrmo casting alloy acc. to DiN isO 5832/4Coating: implaFix® HA-coating size range: ≥ 220 mmproximal reconstruction ≥ 72 mm (32 mm if an extra small Rs stem is used)CCD-angle:standard: 135°; lateralized: 127°

14

ic-long stem and RpC

A.10 ic-long stem and RPCDescription:the ic-long stem implants are available in standard and lateralized version in various lengths. the curved RpC-implants are available in standard and lateralized versions, every version measuring either 255mm, 295mm or 350mm in length, and as left and right versions. the universal instruments enable a simple intraope-rative change from the ic-long stem to the RpC prosthesis and from the standard to the lateralized version.material:CoCrmo casting alloy acc. to DiN isO 5832/4size range: ic-long stem: 9 sizes RpC: 10 sizesCCD-angle:ic long stem: standard: 141°; lateralized: 135° RpC: standard: 135°; lateralized: 130°

15

DiaLoc® Rs revision stem

A.11 DiaLoc® RS revision stem (available in 2012)Description:the DiaLoc® Rs revision stem is a cementless hip stem for revision cases. the conical, rectangular design of the DiaLoc® hip stem provides the high rotational and primary stability. the cortical force transmission extends accross the metaphyseal and diaphyseal region of the femur. material:tiAl6Nb7-forged alloy acc. to DiN isO 5832/11implant surface:corundum-blasted size range: 8 sizes CCD-angle:131°

16

ecoFit® Cup

B.1 EcoFit® Description:in order to minimize the micro motions and prevent pe abrasion in the contact area between metal cup and pe liner, a special locking mechanism has been developed. it allows the use of the identical acetabular cup implant for the use of various inserts. the pressFit Cup offers a triradial design to ensure a rigid seating of the cup in the acetabulum. to enhance the primary stability by using screws, the tapered covers may be removed (while the cup is already seated) and screws may be used. the cup is also available without three additional screw holes (ecoFit® NH).material:tiAl6V4 forged alloy acc. to DiN isO 5832/3Coating: standard version: implaFix® cpti-coatingHA-version : implaFix® cpti- and HA-coating size range: each 12 sizes (46 - 68mm)Cup inserts:BiOLOX® delta, pe 0° & 10°, implacross® pe 0° & 10°, ACCis® (available in 2012)

17

ecoFit® sC

B.2 EcoFit® SCDescription:the ecoFit® sC represents a spherical screw cup. Besides the choice of material, beneficial for osseointegration, and the rough blastered sur-face, the system features its modularity. Various cup inserts can be used for the same cup.material:tiAl6V4 forged alloy acc. to DiN isO 5832/3size range: 12 sizes (46 - 68mm)Cup inserts:BiOLOX® delta, pe 0° & 10°, implacross® pe 0° and 10°, ACCis® (available in 2012)

DiaLoc® sC

B.3 DiaLoc® SCDescription:the tapered DiaLoc® sC screw cup is charac-terised by its modularity. in this way, cup inserts made from pe, highly crosslinked implacross® pe and ceramic inserts from BiOLOX® delta can be inserted into the same cup. the DiaLoc® screw cup has a flattened pole.material:tiAl6V4 forged alloy acc. to DiN isO 5832/3size range: 7 sizes (45 - 63mm)Cup inserts:BiOLOX® delta, pe 0° & 10°, implacross® pe 0° and 10°, ACCis® (available in 2012)

18

ACCis® Cups

B.4 ACCIS® CupsDescription:ACCis® Cups are available in cementless and cemented version. the cups articulate with the modular ACCis® heads. the components of the hip system have a special ceramic surface (see also page 3), that protects the implants against metal wear and minimizes the metal ion release.material:CoCrmo casting alloy acc. to DiN isO 5832/4Coating: tiNbN-coating, cpti-coating on the outer side of the cementless cupsize range: cementless: 20 sizes (42 - 64mm) cemented: 9 sizes (48 - 64mm)

Ceraco dysplasia & revision

B.5 Ceraco dysplasia & revision Description:the design of the Ceraco cup system is deve-loped especially for the supply of dysplasia hips and cases of revision. multiple screw holes are placed in different azimuth angles to allow the ide-al positioning of additional spongiosa screws.material:tiAl6V4 forged alloy acc. to DiN isO 5832/3Coating: cpti- and Bonit®-coatingsize range: dysplasia cup: 4 sizes (40 - 46mm)revision cup: 12 sizes (48 - 70mm)Cup inserts:Ceraco pe-insert 10°

19

ic-reconstruction implants

B.7 ic-reconstruction implantsDescription:reinforcement cage and acetabular ring can be used for the reconstruction of the acetabulum. the outer diameter of the implants is 4mm big-ger than the nominal size. the mueller pe cup and the cemented ACCis® cup are suitable for the cemented implantation into the reconstruc-tion implants. the size of the cup should correla-te to the nominal size of the reinforcement cage respectively the acetabular ring.material:cpti (isO 5832/2) grade 1size range: ic-reinforcement cage: each 4 sizes ic-acetabular ring: 9 sizes

B.6 PE-Cup Mueller IIDescription:the mueller pe Cup is a cemented cup for heads of sizes 28mm and 32mm. Next to standard pe cups, „snap“ cups and dysplasia cups with a cra-nial roofening of 10° are available.material:UHmW-pe acc. to DiN isO 5834/2size range: each 9 sizes (44 - 60mm)

mueller ii pe Cup

20

ACCis® head modular

C.1 ACCIS® head modularDescription:ACCis® components have a special ceramic sur-face (see also page 3), that protects the implants against metal wear and minimizes the metal ion release. the head can be used in combination with the cemented and cementless ACCis® cups (page 16). the modular head is combined with the adequate taper adapter of different neck lengths. material:modular head:CoCrmo casting alloy acc. to DiN isO 5832/4taper adapter:tiAl6V4 forged alloy acc. to DiN isO 5832/3Coating: tiNbN-coatingsize range: 10 sizes (38 - 58mm in 2mm steps)

C.2 Polaric Description:the polaric system is a tripolar hip system. Heads are available in sizes 38 - 58mm in 4mm increments. tiN-heads and CoCrmo-heads of 28mm (22mm for size 38) can be combined with the polaric heads. the polaric heads articulate in cementless or cemented ACCis® cups.material:UHmW-pe acc. to DiN isO 5834/2size range: 6 sizes

polaric

21

Additional items

D.1 ic-intramedullary plugDescription:the intramedullary plug is used for the obtura-tion of the medullary cavity before inserting bone cement. material:UHmW-pe acc. to DiN isO 5834/2size range: small ( ≥ Ø: 9 mm) and large ( ≥ Ø: 14 mm)

D.2 ic-cement restrictor resorbableDescription:the biologically degradable cement restrictor is used for the obturation of the medullary cavity before inserting bone cement. material:gelatine, glycerin, water and methylhydroxyben-zoate size range: 6 sizes (8 - 18)

D.3 ic-cerclageDescription:the ic-cerclage for the treatment of fractures is available in 8mm diameter. the instrumentation for fixation is available.material:cpti (isO 5832/2) Grade 1size range: 8mm

22

Hip implants

ACCIS® Resurfacing head cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4 with TiNbN-coating2900-0038 38 mm2900-0042 42 mm2900-0044 44 mm2900-0046 46 mm2900-0048 48 mm2900-0050 50 mm2900-0052 52 mm2900-0054 54 mm2900-0056 56 mm2900-0058 58 mm(compatible cementless ACCIS® cups on page 28)

AIDA® Short StemMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and HA-coatingstandard:8007-0000 size 08007-0001 size 18007-0002 size 28007-0003 size 38007-0004 size 48007-0005 size 58007-0006 size 68007-0007 size 78007-0008 size 8lateralized:8007-0010 size 08007-0011 size 18007-0012 size 28007-0013 size 38007-0014 size 48007-0015 size 58007-0016 size 68007-0017 size 78007-0018 size 8

EcoFit® hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi-coatingstandard:3039-3062 size 6,253039-3075 size 7,53039-3087 size 8,753039-3100 size 103039-3112 size 11,253039-3125 size 12,53039-3137 size 13,753039-3150 size 153039-3175 size 17,53039-3200 size 20*lateralized:3039-4062 size 6,253039-4075 size 7,53039-4087 size 8,753039-4100 size 103039-4112 size 11,253039-4125 size 12,53039-4137 size 13,753039-4150 size 153039-4175 size 17,53039-4200 size 20*

EcoFit® SubsiderMat.: PMMA (Polymethylmethacrylat)for use with high polishedcemented EcoFit® stems0299-0625 size 6,250299-0750 size 7,50299-1000 size 100299-1250 size 12,50299-1500 size 15

EcoFit® hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and HA-coatingstandard:3038-3062 size 6,253038-3075 size 7,53038-3087 size 8,753038-3100 size 103038-3112 size 11,253038-3125 size 12,53038-3137 size 13,753038-3150 size 153038-3175 size 17,53038-3200 size 20*lateralized:3038-4062 size 6,253038-4075 size 7,53038-4087 size 8,753038-4100 size 103038-4112 size 11,253038-4125 size 12,53038-4137 size 13,753038-4150 size 153038-4175 size 17,53038-4200 size 20*

EcoFit® hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and T-HA-coatingstandard:3038-6062 size 6,253038-6075 size 7,53038-6087 size 8,753038-6100 size 103038-6112 size 11,253038-6125 size 12,53038-6137 size 13,753038-6150 size 153038-6175 size 17,53038-6200 size 20*lateralized:3038-7062 size 6,253038-7075 size 7,53038-7087 size 8,753038-7100 size 103038-7112 size 11,253038-7125 size 12,53038-7137 size 13,753038-7150 size 153038-7175 size 17,53038-7200 size 20*

EcoFit® hip stem cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:3039-6062 size 6,253039-6075 size 7,53039-6100 size 103039-6125 size 12,53039-6150 size 153039-6175 size 17,5*lateralized:3039-7062 size 6,253039-7075 size 7,53039-7100 size 103039-7125 size 12,53039-7150 size 153039-7175 size 17,5*

EcoFit® hip stem cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4high polishedstandard:3038-0062 size 6,253038-0075 size 7,53038-0100 size 103038-0125 size 12,53038-0150 size 153038-0175 size 17,5*lateralized:3038-1062 size 6,253038-1075 size 7,53038-1100 size 103038-1125 size 12,53038-1150 size 153038-1175 size 17,5*

*size available on request

E.1 Hip Implants

23

Hip implantsDiaLoc® hip stem cementlessMat.: implatan®, TiAl6Nb7 acc. to DIN ISO 5832/11standard:8500-00-1 size -18500-0000 size 08500-0001 size 18500-0002 size 28500-0003 size 38500-0004 size 48500-0005 size 58500-0006 size 68500-0007 size 78500-0008 size 88500-0009 size 98500-0010 size 10lateralized:8500-0103 size 38500-0104 size 48500-0105 size 58500-0106 size 68500-0107 size 78500-0108 size 88500-0109 size 9

ic-straight stem type I cemented *NMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:3513-0750 size 7,53513-0875 size 8,753513-1000 size 103513-1125 size 11,253513-1250 size 12,53513-1375 size 13,753513-1500 size 153513-1625 size 16,253513-1750 size 17,53513-2000 size 20lateralized:3514-0750 size 7,53514-0875 size 8,753514-1000 size 103514-1125 size 11,253514-1250 size 12,53514-1375 size 13,753514-1500 size 153514-1625 size 16,253514-1750 size 17,53514-2000 size 20

ic-straight stem type II cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:3516-0750 size 7,53516-1000 size 103516-1125 size 11,253516-1250 size 12,53516-1375 size 13,753516-1500 size 153516-1625 size 16,253516-1750 size 17,53516-2000 size 20lateralized:3518-0750 size 7,53518-1000 size 103518-1125 size 11,253518-1250 size 12,53518-1375 size 13,753518-1500 size 153518-1625 size 16,253518-1750 size 17,53518-2000 size 20

LOAD SHIFT® hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and HA-coating8600-0310 10mm8600-0311 11mm 8600-0312 12mm8600-0313 13mm8600-0314 14mm8600-0315 15mm8600-0316 16mm8600-0318 18mm

Ceraco hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with cpTi-coating and TCP (Bonit®)1260-0090 9mm1260-0100 10mm1260-0110 11mm1260-0120 12mm1260-0130 13mm1260-0140 14mm1260-0150 15mm1260-0160 16mm

Ceraco hip stem cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/41268-0090 9mm1268-0110 11mm1268-0130 13mm1268-0150 15mm

AJS® hip stem cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® HA-coating8006-1105 size 1 left8006-1205 size 2 left8006-1305 size 3 left8006-1405 size 4 left8006-1505 size 5 left8006-1605 size 6 left8006-1705 size 7 left8006-1805 size 8 left8006-1905 size 9 left8006-1110 size 1 right8006-1210 size 2 right8006-1310 size 3 right8006-1410 size 4 right8006-1510 size 5 right8006-1610 size 6 right8006-1710 size 7 right8006-1810 size 8 right8006-1910 size 9 right

AJS® hip stem cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/48006-2105 size 1 left8006-2305 size 3 left8006-2405 size 4 left8006-2505 size 5 left8006-2605 size 6 left8006-2705 size 7 left8006-2805 size 8 left8006-2110 size 1 right8006-2310 size 3 right8006-2410 size 4 right8006-2510 size 5 right8006-2610 size 6 right8006-2710 size 7 right8006-2810 size 8 right

*N: also available with tiN-coating

24

Hip implantsCortina hip stem cemented *NMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:8205-1130 size 1/130 left8205-2135 size 2/135 left8205-3140 size 3/140 left8205-4145 size 4/145 left8205-5150 size 5/150 left8205-1170 size 1/170 left8205-2170 size 2/170 left8205-3170 size 3/170 left8205-4170 size 4/170 left8205-5170 size 5/170 left8200-1130 size 1/130 right8200-2135 size 2/135 right8200-3140 size 3/140 right8200-4145 size 4/145 right8200-5150 size 5/150 right8200-1170 size 1/170 right8200-2170 size 2/170 right8200-3170 size 3/170 right8200-4170 size 4/170 right8200-5170 size 5/170 rightlateralized:8206-1130 size 1/130 left8206-2135 size 2/135 left8206-3140 size 3/140 left8206-4145 size 4/145 left8206-5150 size 5/150 left8206-1170 size 1/170 left8206-2170 size 2/170 left8206-3170 size 3/170 left8206-4170 size 4/170 left8206-5170 size 5/170 left8201-1130 size 1/130 right8201-2135 size 2/135 right8201-3140 size 3/140 right8201-4145 size 4/145 right8201-5150 size 5/150 right8201-1170 size 1/170 right8201-2170 size 2/170 right8201-3170 size 3/170 right8201-4170 size 4/170 right8201-5170 size 5/170 right

Cortina hip stem (revision) cemented *NMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:8205-2200 size 2/200 left8205-3200 size 3/200 left8205-4200 size 4/200 left8205-5200 size 5/200 left8205-3250 size 3/250 left8205-4250 size 4/250 left8205-5250 size 5/250 left8205-4300 size 4/300 left8205-5300 size 5/300 left8200-2200 size 2/200 right8200-3200 size 3/200 right8200-4200 size 4/200 right8200-5200 size 5/200 right8200-3250 size 3/250 right8200-4250 size 4/250 right8200-5250 size 5/250 right8200-4300 size 4/300 right8200-5300 size 5/300 rightlateralized:8206-2200 size 2/200 left8206-3200 size 3/200 left8206-4200 size 4/200 left8206-5200 size 5/200 left8206-3250 size 3/250 left8206-4250 size 4/250 left8206-5250 size 5/250 left8206-4300 size 4/300 left8206-5300 size 5/300 left8201-2200 size 2/200 right8201-3200 size 3/200 right8201-4200 size 4/200 right8201-5200 size 5/200 right8201-3250 size 3/250 right8201-4250 size 4/250 right8201-5250 size 5/250 right8201-4300 size 4/300 right8201-5300 size 5/300 right

*N: also available with tiN-coating

RS proximal component *S incl. safety screw Mat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/36710-1527 127° 32 mm6710-1535 135° 32 mm 6710-1627 127° 42 mm 6710-1635 135° 42 mm

RS metaphyseal componentMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with HA-coating6730-4121 40 mm6730-5121 50 mm6730-4221 40 mm small6730-5221 50 mm small

RS extension piece Mat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with HA-coating6730-0125 25 mm

RS screw M8Mat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 6720-4008 40 mm6720-5008 50 mm6720-6508 65 mm6720-7508 75 mm6720-9008 90 mm6720-1008 100 mm6720-1158 115 mm6720-1258 125 mm

RS stem** cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with implaFix® HA-coating6762-1514 14 x 150 mm6762-1516 16 x 150 mm6762-1518 18 x 150 mm6762-1520 20 x 150 mm6762-2014 14 x 200 mm6762-2016** 16 x 200 mm6762-2018** 18 x 200 mm6762-2020** 20 x 200 mm6762-2516 16 x 250 mm6762-2518** 18 x 250 mm6762-2520** 20 x 250 mm** with locking holes for Ø 4,5 mm screws

RS stem extra small cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with HA-coating6764-1514 14 x 150 mm 6764-2014 14 x 200 mm

RS stem cemented *NMat.: implavit®, CoCrMo acc. to DIN ISO 5832/46760-1215 12 x 150 mm 6760-1415 14 x 150 mm 6760-1615 16 x 150 mm 6760-1815 18 x 150 mm 6761-1220 12 x 200 mm 6761-1420 14 x 200 mm 6761-1620 16 x 200 mm 6761-1820 18 x 200 mmstems in length of 120 mm are available on demand!

ic-long stem cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:3612-0155 10/155 3612-0175 10/175 3612-0200 10/200 3612-0212 12/200 3612-0214 14/200 3612-0252 12/250 3612-0254 14/250lateralized:3612-2175 10/1753612-2200 10/200

*s: also available with silver coating

25

Hip implantsRPC cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4standard:3612-0255 10/255 left 3612-0295 12/295 left3612-0350 12/350 left3612-1255 10/255 right 3612-1295 12/295 right3612-1350 12/350 rightlateralized:3612-2255 10/255 left 3612-2295 12/295 left3612-3255 10/255 right 3612-3295 12/295 right

DiaLoc® RS revision stem cementlessMat.: implatan®, TiAl6Nb7 acc. to DIN ISO 5832/118500-0203 size 38500-0204 size 48500-0205 size 58500-0206 size 68500-0207 size 78500-0208 size 88500-0209 size 98500-0210 size 10

EcoFit® Cup cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi-coating0220-0046 46 mm0220-0048 48 mm0220-0050 50 mm0220-0052 52 mm0220-0054 54 mm0220-0056 56 mm0220-0058 58 mm0220-0060 60 mm0220-0062 62 mm0220-0064 64 mm0220-0066 66 mm0220-0068 68 mm

EcoFit® Cup HA cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and HA-coating0220-0346 46 mm0220-0348 48 mm0220-0350 50 mm0220-0352 52 mm0220-0354 54 mm0220-0356 56 mm0220-0358 58 mm0220-0360 60 mm0220-0362 62 mm0220-0364 64 mm0220-0366 66 mm0220-0368 68 mm

EcoFit® NH Cup cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi-coating0220-0146 46 mm0220-0148 48 mm0220-0150 50 mm0220-0152 52 mm0220-0154 54 mm0220-0156 56 mm0220-0158 58 mm0220-0160 60 mm0220-0162 62 mm0220-0164 64 mm0220-0166 66 mm0220-0168 68 mm

EcoFit® NH Cup HA cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with implaFix® cpTi- and HA-coating0220-0446 46 mm0220-0448 48 mm0220-0450 50 mm0220-0452 52 mm0220-0454 54 mm0220-0456 56 mm0220-0458 58 mm0220-0460 60 mm0220-0462 62 mm0220-0464 64 mm0220-0466 66 mm0220-0468 68 mm

EcoFit® SC cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/30220-0246 46 mm0220-0248 48 mm0220-0250 50 mm0220-0252 52 mm0220-0254 54 mm0220-0256 56 mm0220-0258 58 mm0220-0260 60 mm0220-0262 62 mm0220-0264 64 mm0220-0266 66 mm0220-0268 68 mm

DiaLoc® SC cementlessMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/38505-0145 45 mm8505-0148 48 mm8505-0151 51 mm8505-0154 54 mm8505-0157 57 mm8505-0160 60 mm8505-0163 63 mm

ACCIS® Cup cementlessMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4 with TiNbN-coating and cpTi-coating2912-3842 38/42 mm 2912-3844 38/44 mm2912-4246 42/46 mm 2912-4248 42/48 mm2912-4448 44/48 mm2912-4450 44/50 mm2912-4650 46/50 mm2912-4652 46/52 mm2912-4852 48/52 mm2912-5052 50/52 mm2912-5054 50/54 mm2912-5056 50/56 mm2912-5256 52/56 mm2912-5258 52/58 mm2912-5458 54/58 mm2912-5460 54/60 mm2912-5660 56/60 mm2912-5662 56/62 mm 2912-5862 58/62 mm 2912-5864 58/64 mm

ACCIS® Cup cementedMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4 with TiNbN-coating2923-3848 38/48 mm2923-3850 38/50 mm 2923-4252 42/52 mm 2923-4254 42/54 mm 2923-4656 46/56 mm 2923-4658 46/58 mm 2923-5060 50/60 mm 2923-5062 50/62 mm 2923-5464 54/64 mm

Ceraco Dysplasia CupMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with cpTi-coating and Bonit®0280-9040 40 mm0280-9042 42 mm0280-9044 44 mm0280-9046 46 mm

Ceraco Revision CupMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 with cpTi-coating and Bonit®0280-9048 48 mm0280-9050 50 mm0280-9052 52 mm0280-9054 54 mm0280-9056 56 mm0280-9058 58 mm0280-9060 60 mm0280-9062 62 mm0280-9064 64 mm0280-9066 66 mm0280-9068 68 mm0280-9070 70 mm

26

Hip implantsPE-Cup Mueller IIMat.: UHMW-PE acc. to DIN ISO 5834/21021-2844 28/44 mm1021-2846 28/46 mm1021-2848 28/48 mm1021-2850 28/50 mm1021-2852 28/52 mm1021-2854 28/54 mm1021-2856 28/56 mm1021-2858 28/58 mm1021-2860 28/60 mm1021-3244 32/44 mm1021-3246 32/46 mm1021-3248 32/48 mm1021-3250 32/50 mm1021-3252 32/52 mm1021-3254 32/54 mm1021-3256 32/56 mm1021-3258 32/58 mm1021-3260 32/60 mm

PE-Cup Mueller II SnapMat.: UHMW-PE acc. to DIN ISO 5834/21041-3244 32/44 mm1041-3246 32/46 mm1041-3248 32/48 mm1041-3250 32/50 mm1041-3252 32/52 mm1041-3254 32/54 mm1041-3256 32/56 mm1041-3258 32/58 mm1041-3260 32/60 mm

PE-Cup Mueller II Dysplasia 10°Mat.: UHMW-PE acc. to DIN ISO 5834/21071-2844 28/44 mm1071-2846 28/46 mm1071-2848 28/48 mm1071-2850 28/50 mm1071-2852 28/52 mm1071-2854 28/54 mm1071-2856 28/56 mm1071-2858 28/58 mm1071-2860 28/60 mm1071-3244 32/44 mm1071-3246 32/46 mm1071-3248 32/48 mm1071-3250 32/50 mm1071-3252 32/52 mm1071-3254 32/54 mm1071-3256 32/56 mm1071-3258 32/58 mm1071-3260 32/60 mm

ic-acetabular ringMat.: cpTi acc. to DIN ISO 5832/2 Grade 17000-1242 42 mm7000-1244 44 mm 7000-1246 46 mm7100-1248 48 mm 7000-1250 50 mm 7000-1252 52 mm 7000-1254 54 mm7000-1256 56 mm7000-1258 58 mm

ic-reinforcement cageMat.: cpTi acc. to DIN ISO 5832/2 Grade 17000-0244 44 mm right7000-0250 50 mm right7000-0256 56 mm right7000-0262 62 mm right7001-0244 44 mm left7001-0250 50 mm left7001-0256 56 mm left7001-0262 62 mm left

Spongiosa Screw flat head Ø 6,5mmMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3 0280-1015 Length 15mm0280-1020 Length 20mm0280-1025 Length 25mm0280-1030 Length 30mm0280-1035 Length 35mm0280-1040 Length 40mm0280-1045 Length 45mm

ACCIS® head modularMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4 with TiNbN-coating2902-0032 32 mm2902-0036 36 mm2902-0038 38 mm 2902-0040 40 mm 2902-0042 42 mm 2902-0044 44 mm2902-0046 46 mm2902-0048 48 mm2902-0050 50 mm 2902-0052 52 mm2902-0054 54 mm2902-0056 56 mm2902-0058 58 mm

taper adapterMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3, taper 12/142932-3600 32-36 mm, s2932-3605 32-36 mm, m 2932-3610 32-36 mm, L 2938-4400 38-44 mm, s2938-4405 38-44 mm, m 2938-4410 38-44 mm, L2946-5000 46-50 mm, s 2946-5005 46-50 mm, m2946-5010 46-50 mm, L 2952-5800 52-58 mm, s2952-5805 52-58 mm, m 2952-5810 52-58 mm, Ltaper adapter with neck lengths of XL to XXL and taper 14/16 are available on demand!

Polaric head Mat.: UHMW-PE acc. to DIN ISO 5834/22900-2238 22/38 mm2900-2842 28/42 mm2900-2846 28/46 mm2900-2850 28/50 mm2900-2854 28/54 mm2900-2858 28/58 mm

ic-bipolar head CoCrMoMat.: implavit®, CoCrMo acc. to DIN ISO 5832/4 and UHMW-PE acc. to DIN ISO 5834/22151-0044 28/44 mm2151-0046 28/46 mm2151-0048 28/48 mm2151-0050 28/50 mm2151-0052 28/52 mm2151-0054 28/54 mm2151-0056 28/56 mm2151-0058 28/58 mm2151-0060 28/60 mm

ic-head CoCrMoMat.: implavit®, CoCrMo acc. to DIN ISO 5832/12taper 12/142312-2200 22 mm, s2312-2205 22 mm, m2312-2210 22 mm, L 2387-2800 28 mm, s2387-2805 28 mm, m2387-2810 28 mm, L2387-2815 28 mm, XL2387-3200 32 mm, s2387-3205 32 mm, m 2387-3210 32 mm, L2387-3215 32 mm, XL

ic-head titaniumMat.: implatan®, TiAl6V4 acc. to DIN ISO 5832/3with TiN-coating; taper 12/142787-2800 28 mm, K2787-2805 28 mm, m2787-2810 28 mm, L2787-2815 28 mm, XL2787-3200 32 mm, K2787-3205 32 mm, m2787-3210 32 mm, L2787-3215 32 mm, XL2787-3600 36 mm, K2787-3605 36 mm, m2787-3610 36 mm, L2787-3615 36 mm, XL

27

Hip implantsic-head BIOLOx® deltaMat.: Al2O3 and ZrO3taper 12/142586-2800 28 mm, s2586-2805 28 mm, m2586-2810 28 mm, L2586-3200 32 mm, s 2586-3205 32 mm, m 2586-3210 32 mm, L2586-3600 36 mm, s 2586-3605 36 mm, m 2586-3610 36 mm, L

ic-head BIOLOx® forteMat.: Al2O3 acc. to DIN ISO 6474taper 12/142587-2800 28 mm, s2587-2805 28 mm, m2587-2810 28 mm, L2587-3200 32 mm, s2587-3205 32 mm, m2587-3210 32 mm, L2587-3600 36 mm, s2587-3605 36 mm, m2587-3610 36 mm, L

ic-head Revision BIOLOx® deltaMat.: Al2O3 and ZrO3 and TiAl6V4 acc. to DIN ISO 5832/3; taper 12/142588-2800 28 mm, s2588-2805 28 mm, m 2588-2810 28 mm, L 2588-2815 28 mm, XL 2588-3200 32 mm, s 2588-3205 32 mm, m 2588-3210 32 mm, L 2588-3215 32 mm, XL2588-3600 36 mm, s 2588-3605 36 mm, m 2588-3610 36 mm, L 2588-3615 36 mm, XL

PE cup insert 0° Mat.: UHMW-PE acc. to DIN ISO 5834/20280-2039 28/390280-3444 32/440280-3448 32/480280-4448 36/480280-3452 32/520280-4452 36/52

PE cup insert 10° Mat.: UHMW-PE acc. to DIN ISO 5834/20280-2139 28/390280-3144 32/440280-3148 32/480280-4548 36/480280-3152 32/520280-4552 36/52

implacross® PE cup insert 0° Mat.: crosslinked UHMW-PE 0223-2839 28/390223-3244 32/440223-3248 32/480223-3648 36/480223-3252 32/520223-3652 36/52

implacross® PE cup insert 10° Mat.: crosslinked UHMW-PE 0224-2839 28/390224-3244 32/440224-3248 32/480224-3648 36/480224-3252 32/520224-3652 36/52

BIOLOx® delta cup insertMat.: Al2O3 and ZrO30220-3239 32/390220-3244 32/440220-3644 36/440220-3248 32/480220-3648 36/480220-3252 32/520220-3652 36/52

ACCIS® cup insertMat.: CoCrMo casting alloy acc. to DIN ISO 5832/4with TiNbN-coating0221-3239 32/390221-3644 36/440221-3648 36/480221-3652 36/520221-4048 40/480221-4452 44/52

PE cup insert for Ceraco Cup Mat.: UHMW-PE acc. to DIN ISO 5834/20280-9140 22/10°/ for cup 40+420280-9144 22/10°/ for cup 44+460280-9148 28/10°/ for cup 48+500280-9152 28/10°/ for cup 52+540280-9156 28/10°/ for cup 56+580280-9160 32/10°/ for cup 60+620280-9164 32/10°/ for cup 64+660280-9168 32/10°/ for cup 68+70

ic-intramedullary plugMat.: UHMW-PE acc. to DIN ISO 5834/20299-4000 small cavity ≥ Ø: 9 mm0299-4010 large cavity ≥ Ø: 14 mm

ic-cement restrictor resorbableMat.: gelatine, glycerin, water and methylhydroxy-benzoate0299-1008 size 080299-1010 size 100299-1012 size 120299-1014 size 140299-1016 size 160299-1018 size 18

ic-cerclageMat.: cpTi acc. to DIN ISO 5832/2 grade 10060-1008 8mm

28

Hip instruments

Acetabulum reamer container42-64mm in 1mm steps2950-1048

ACCIS® basic cup container (top)2950-1051

ACCIS® resurfacing head reamercontainer 2950-1057

ACCIS® resurfacing head container II2950-1062

ACCIS® cup impactorcontainer2950-1252

ACCIS® basic cup container (bottom)2950-1051

ACCIS® resurfacing headcontainer I2950-1061

E.2 Hip Instruments

29

ACCIS® basic container modular head (top)2901-1051

ACCIS® modular head cup impactorcontainer2901-1252

AIDA® easy lock GIS®

container8007-7997

EcoFit® easy lockcontainer7999-7043

ACCIS® basic container modular head (bottom)2901-1051

ACCIS® acetabulum cup cementedcontainer2950-1054

AIDA® easy lockcontainer8007-7999

EcoFit® easy lock GIS®

container7999-7049

Hip instruments

30

DiaLoc® container8501-0035

AJS® snap lock GIS® container8006-7996

AJS® broach AJS® broach container left container right8006-7997 8006-7998

Cortina broach Cortina broachcontainer left container right7200-1105 7200-1110

ic-straight stemcontainer7516-9905

AJS® snap lockcontainer8006-7999

Cortina basiccontainer 7200-1100

Cortina broach Cortina broachcontainer 170 left container 170 right7200-1705 7200-1710

Hip instruments

31

LOAD SHIFT®

container (top)7999-8305

flexible drills 270mm container A/O7999-7709

rigid drills 8-16mm container A/O 1230-0007

DiaLoc® RScontainer8501-0039

LOAD SHIFT®

container (bottom)7999-8305

Ceracocontainer1230-0008

ic-long stem/ RPC container7999-3610

Hip instruments

32

MUTARS® RScontainer 17999-6711

MUTARS® RScontainer 27999-6715

MUTARS® RScontainer 47999-6714

MUTARS® RScontainer 37999-6716

Hip instruments

33

EcoFit® Cup container 36mm (top)0220-1036

EcoFit® Cup GIS® container 36mm (top)0220-1136

GIS® retractorcontainer7999-7514

acetabulumcontainer 0220-1035

EcoFit® Cup container 36mm (bottom)0220-1036

EcoFit® Cup GIS® container 36mm (bottom)0220-1136

GIS® acetabulum reamer full profilecontainer7999-7515

EcoFit® SC container 36mm 0220-1037

Hip instruments

34

Hip instruments

DiaLoc® SCcontainer (top)8501-0037

Ceraco revision cupcontainer (top)0289-0017

Ceraco dysplasia cupcontainer 0289-0016

ic-bipolar head container 7960-9999

DiaLoc® SCcontainer (bottom)8501-0037

Ceraco revision cupcontainer (bottom)0289-0017

Mueller PE Cupcontainer7960-0270

Polaric trialcontainer7999-7970

35

Hip instruments

Polaric Cupcontainer (top)7999-7971

trial head 28mm + 32mm S-xLcontainer7999-7960

ic cerclagecontainer7999-0060

Polaric Cupcontainer (bottom)7999-7971

ic-inramedullary plug resorbablecontainer0299-9999

36

surgical techniques

E.3 Surgical Techniques

37

surgical techniques

0482

your local distributor:

implantcast GmbHLueneburger schanze 26

D-21614 Buxtehude Germany

phone: +49 4161 744-0 fax: +49 4161 744-200

e-mail: info@implantcast.de internet: www.implantcast.de H

ipO

VeR

e-07

1011

*+E1

ICHI

POVE

RE++

**+

$$E1

IC07

1011

++*