Hilti Anchors

Anchoring Systems

169 Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) | Hilti online: www.hilti.com.hk

Anchoring Systems

Hilti. Outperform. Outlast.

Introduction

Anchor selection chart Page 171Technical software and literature Page 173

Simply proven and approved Page 174

Adhesive Anchors

HIT-RE 500 injection adhesive Page 175HIT-RE 500 SD injection adhesive Page 177

HIT-HY 150 injection adhesive Page 178 ED 3500-A cordless dispenser Page 180

HIT system Page 181HIT-HY 70 injection adhesive for masonry Page 183

HIT-V Threaded Anchor Rods Page 186HVA adhesive anchor system Page 188

Heavy Duty Anchors

HDA self-undercut anchor Page 192Dynamic set Page 196

HSL-3 heavy duty anchor Page 197

Medium Duty Anchors

HSC safety anchor 00HST stud anchor Page 202HSA stud anchor Page 204

HUS-H screw anchor Page 206HLC sleeve anchor Page 208

HKD push-in anchor Page 211HKV push-in anchor Page 213

Light Duty Anchors

HUD-1 / HUD-L universal anchor Page 215 HRD-U door frame anchor Page 216HRD-C door frame anchor Page 217

HT door frame anchor Page 218HPS-1 impact anchor Page 219HHD-S cavity anchor Page 221

HTB hollow wall metal anchor Page 223HSP drywall anchor Page 224

HA 8 ring / hook anchor Page 225HLD light duty anchor Page 226

Anchoring Systems

170Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) | Hilti online: www.hilti.com.hk

7

with HIT-V, HIS-N

HRD-U

Hilti HIT-HY 150

HC

R s

tain

less

ste

el

Sher

andiz

ed o

rH

ot d

ip g

alva

niz

ed s

teel

with HAS, HIT-V, HIS-N

Hilti HIT-RE 500 SDwith HAS, HIT-V, HIS-N

Hilti HIT-RE 500with HAS, HIT-V, HIS-N

AA

C b

lock

Anchor Selection


VdS

VdS

VdS

VdS

VdS

ICC-ES Report

178

183

200

192

197

202

204

211

208

219

216

218

206

213

215

226

223

224

225

221

178

175

175

188


10

177

Anchoring Systems


PROFIS - Software

Anchoring Systems

Fastening Technology ManualOther major features include:

From quick, rough and dirty calculations to fully defined designs.

Graphical input with all dimensions and loading visible.

User-defined print output.

Easy-to-understand Anchor setting animations.

Supports 13 different design methods and 16 languages.

Always up to date with regular downloads and add-ons.

Workshop drawings to ensure the fabricators get it right.

Free downloads. (www.hilti.com.hk)

For complete Anchor setting instruction and Anchor design data.

Technical software and literature.

Hilti PROFIS offers more flexibility and functionality than any other anchor design progoram. Included within the software are a number of powerful features, exclusive to Hilti, that greatly enhance the users choice and efficiency:

Easy-to-use 3D interactive display.

Change and modify designs at the touch of a button.

A comprehensive easy-to-use anchor selector.

A database of CAD drawings for all Hilti anchors which can be exported to other formats.

3D baseplate design plus finite element analysis for baseplate thickness caculations.

Anchoring Systems


7

High steel quality offers ideal published shear load capacities

Optimized expansion-sleeve design ensure automatic follow-up expansion in cracked concrete

Stud-type anchor allows for fastening applications with stand-off from the concrete thickness

Fast and easy through-set installation HSL-3-B torque cap ensures proper

installation with no need for a torque wrench Wide range of size and head configurations

Heavy-duty adhesive anchoring systems with long working (gel) time for deep installations

Bond strengths that outperform in seismic and cracked concrete conditions

Wide range of approved flexible embedment length and diameters with the HIT-V rod (class 5.8 , EN ISO 898-1 steel)

Hilti HIT-RE 500-SD injectable mortar Hilti HSL-3 heavy duty expansion anchor

Hilti HST stud anchor

The third party assessment leads to an ICC-ES report in which the anchor resistance data are reported. These data include specific capacities for seismic loads.

Approved for used in cracked & non-cracked concrete according to ETAG001 option1.

Hilti Anchors are developed and tested for use in cracked concrete.Additional tests under cyclic loads on anchors located in cracks are performed.

Simply proven and approvedHilti Solutions for fastening in cracked concrete

Anchoring Systems


Injection adhesiveHIT-RE 500

AdvantagesExtremely high performance without expansion pressure

User-friendly, odourless (styrene free)

Lower sensitivity to oversized, dusty, wet holes and diamond coring holes

Red colour adhesive for easy on site inspection

Foil pack design reduces disposal cost

With NSF and WRAS approvals for use in contact with drinking water

Short dispensing time

Applications Suitable to achieve high loads in concrete and stone For fixing the base of tower crane For fixing the fender in terminals For fixing post-installed rebar up to Y40 and anchor rod up M39

For underwater application

Base material Concrete Hard natural stone Solid blockwork

Material 2-component ready mix epoxy resin (styrene-free)

Curing timeTemperature of the

base materialWorking time Curing time

40˚C 12 min. 4 hours



10˚C 2 hours 24 hours

Approvals: (Rebar)

OrderingOrder designation Content (ml) Package (pcs) Including Item No.

Foil pack RE 500 / 500 / 1 500 20 1 Mixer 00426672

Foil pack RE 500 / 330 / 1 330 25 1 Mixer 00426675

HIT-RE-M mixer - 100 - 00337111

Installation procedures

Inject the mortar from bottom to the top of the hole. (Approx. 2/3 of the hole depth).

9

Fix the work piece after the grout is cured.

11 12

Insert the anchor rod slowly by turning it into the mortar up to the required depth.

10

Drill the hole. Clean the drilled hole.

2 3

Throw away (must) first 4 trigger pulls for 500 ml cartridge or 3 trigger pulls for 330 ml cartridge. Release dispenser to stop the grout flowing.

87

Open the cartridge cap, insert it into the holder and screw the mixer on it.

4 5

Put the cartridge into the dispenser.

6

4x/3x

Anchoring Systems


7

hnom

tfix

df

do

h1

Materials Steel strength grade 5.8 and 8.8 for M8 to M24 and M27 to M39 respectively,

galvanized at least 5µm

Steel strength grade 5.8 and 8.8 for M8 to M24 and M27 to M39 respectively, hot dip galv. to 45µm

A4-70 and A4-50 stainless steel for M8 to M24 and M27 to M39 respectively.

High corrosion resistance (HCR) (M8-M24)

Anchor rodHIT-RE 500 with HAS-E / HIT-V

Anchor sleeveHIT-RE 500 with HIS-N

hs

hnom

df

do

h1

Technical data Recommended load (kN), non-cracked concrete at 25N/mm², safety factor (�)=3

Model Size M8 M10 M12 M16 M20

HIT-RE 500 + Tensile Load, Nrec 8.3 15.3 22.3 37.3 36.3HIS-N Shear Load, Vrec 4.3 7.6 13.0 19.7 18.3

HIT-RE 500 + Tensile Load, Nrec 8.6 13.6 19.6 31.7 38.3HIS-RN Shear Load, Vrec 4.3 6.7 10.0 18.3 27.7

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method, please refer to Fastening Technology Manual

Materials Carbon steel galvanized at least 5µm (M8-M20) A4-70 stainless steel (M8-M20)

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method please refer to Fastening Technology Manual 3) HAS-HCR anchor rod are only up to M24 only

Approvals: (Threaded Rod)

Anchor sleeve HIS-N page 191

Anchor rod HAS-E Anchor rod HIT-V page 189 page 186

Technical data Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(�)=3

HIT-RE 500 + HAS-ER / HCR / HIT-VR

HIT-RE 500 + HAS-E / -EF / HIT-V

Model Size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39

Tensile Load, Nrec 5.7 8.7 12.7 23.5 37.3 51.2 62.6 74.7 87.5 100.9 115

Shear Load, Vrec 2.8 4.3 6.3 12.0 16.7 26.7 70.3 70.3 86.2 101.2 121.7

Tensile Load, Nrec 7.7 12.3 17.7 23.5 37.3 51.2 62.6 74.7 87.5 100.9 115.0

Shear Load, Vrec 4.0 6.3 9.0 17.0 26.3 37.3 36.0 44.0 53.9 63.2 75.4

Anchoring Systems







10˚C 2 hours 24 hours

Injection adhesiveHIT-RE 500 SD

Model Size M8 M10 M12 M16

HIT-RE 500 SD + Tensile Load, Nrec 4.0 6.4 9.3 11.2

HIT-V Shear Load, Vrec 2.3 4.0 5.6 10.4


HIT-RE 500 SD + Tensile Load, Nrec 17.7 24.4 29.8 35.5

HIT-V Shear Load, Vrec 16.2 23.4 30.6 37.3

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method please refer to Fastening Technology Manual 3) HAS-HCR anchor rod are only up to M24 only

Technical data Recommended load (kN), non-cracked concrete at 25N/mm², safety factor (�) =3

Applications Suitable to achieve high loads in concrete and stone For fixing steel structures, machines, conveyor systems, crash barriers storage

systems, noise-reduction walls, stairs For fixing post-installed rebar up to Y32 and anchor rod up to M30 Seismic application

For underwater application

Base material Cracked concrete Concrete Hard natural stone Solid blockwork


AdvantagesExtremely high performance without expansion pressureUser-friendly, odourless (styrene free)Lower sensitivity to oversized, dusty, wet holes and diamond coring holesRed colour adhesive for easy on site inspectionFoil pack design reduces disposal costWide range of approved fasteners-One mortar for all types / HIS-N threaded sleeves / 8-32 mm dia. rebar used as anchors / HIT-V anchor rods, M8 to M30 / Approved for seismic applicationsEasy manual setting operation / No setting tools required

Special Request

Approvals:



Foil pack HIT-RE 500-SD / 500 500 20 1 Mixer 00387093

Foil pack HIT-RE 500-SD / 330 330 25 1 Mixer 00387092

HIT-RE-M mixer - 100 - 00337111

Anchor rod HIT-V page 186


9


11 12


10


2 3


87


4 5


6

4x/3x

Anchoring Systems


7

Injection adhesiveHIT-HY 150

Approvals: (Rebar)

Curing time

Temperature of the base material Working time Curing time

40˚C 2 min. 40 min.

30˚C 4 min. 50 min.

20˚C 6 min. 90 min.


Advantages For fastenings without expansion pressure

User-friendly and odourless (styrene-free)

Fast curing resin to increase the productivity

Foil pack design reduces disposal cost

With NSF and WRAS approvals for use in contact with drinking water

Applications Suitable to achieve high loads in concrete and stone For fixing post-installed rebar and anchor rod up to M24 For fastening the hand rail and fencing For repair mortar

Base Material Concrete Hard natural stone




FOIL PACK RE HIT-HY 150 / 500 / 2 500 20 2 Mixers 00338973

FOIL PACK RE HIT-HY 150 / 330 / 2 330 20 2 Mixers 00315959

HIT-M mixer - 100 - 00068156


9


11 12


10


2 3


87


4 5


6

3x/2x

Anchoring Systems


hnom

tfix

df

do

h1

Anchor rodHIT-HY 150 with HAS-E / HIT-V

Materials Steel strength grade 5.8 for M8 to M24 galvanized at least 5µm Steel strength grade 5.8 for M8 to M24, hot dip galv. to 45µm A4-70 stainless steel (M8-M24) High corrosion resistance (HCR) (M8-M24)

Approvals: (Threaded Rod) Technical data Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(�)=3

Model Size M8 M10 M12 M16 M20 M24

HIT-HY 150 + HAS-E / -EF / HIT-V

Tensile Load, Nrec 5.7 8.7 12.7 18.8 30.3 42.2

Shear Load, Vrec 2.8 4.3 6.3 12.0 18.7 26.7

HIT-HY 150 +HAS-ER / -HCR / HIT-V-R


Shear Load, Vrec 4.0 6.3 9.0 17.0 26.3 37.3

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method, please refer to Fastening Technology Manual3) HAS-HCR anchor rod are only up to M24 only

Anchor sleeve HIT-HY 150 with HIS-N

MaterialsCarbon steel galvanized at least 5µm (M8-M20)A4-70 stainless steel (M8-M20)



HIT-HY 150 + HIS-NTensile Load, Nrec 8.3 13.3 20.0 39.7 36.3

Shear Load, Vrec 4.3 7.7 13.0 19.7 18.3

HIT-HY 150 + HIS-RNTensile Load, Nrec 8.7 13.3 19.7 36.7 46.7

Shear Load, Vrec 4.3 6.7 10.0 18.3 27.7


hs

hnom

df

do

h1


Anchor sleeve HIS-N page 191

Anchoring Systems


7

Cordless dispenser ED 3500-A

Special Request

AdvantagesSpecially designed for repetitive, heavy use even in difficult-to-reach locations

Quicker and less tiring to use - for higher productivity

Provides the power and efficiency of a pneumatic dispenser without need for a compressor

Effortless injection even at low temperatures and in deep holes

Low weight for maximum operating comfort

Applications Injection of Hilti HIT adhesive mortar for fastening anchor rods and rebars in

concrete, masonry and stoneED 3500-A

Power source type 14.4 V / 2.6 Ah Li-ion battery

Dispenser type Cordless electric dispenser

Weight including batteries 2.55 kg

For use with All Hilti foil packs

Performance (at 20˚C ; w/o extension)

500 ml cartridge in 70 sec330 ml cartridge in 45 sec

Battery capacity Up to 80 cartridges (HIT RE500, 500 ml foil packs)

Dispensing force Max. 3000 N

Model switch Off position / continuous feed / single stroke

Technical data

FLEET MANAGEMENT

OrderingOrder designation Package content Item No.

ED 3500-A cordless dispenser kit ED 3500-A cordless dispenser, safety goggles, round brushes (13, 18, 28 mm dia.), blow-out pump, foil pack holder (x2), operating instructions (ED 3500 and charger), supplied in a Hilti toolbox

00360862

ED 3500-A cordless dispenser basic kit

ED 3500-A cordless dispenser, safety goggles, foil pack holder (x1), operating instructions, supplied in a cardboard box

00360863

Accessories

Order designation Item No.

C4/36 ACS (230V) standard battery charger in a cardboard box 00272434 with operating instruction and safety precautions

B14 battery (2.6Ah Li-ion) in a cardboard box 00273114

ED 3

500-

A

Anchoring Systems

181 Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118 (Mon - Fri 8:30 am - 6:00 pm / Sat 8:30 am - 1:00 pm) | Hilti online: www.hilti.com.hk Special Request

HIT SystemInjection of Hilti HIT adhsive mortar for fastening anchor rods and rebars in concrete, masonry and stone.

Accessories

Order designation Item No. Foil pack holder (500 ml) 3:1 00339477 Foil pack holder (330 ml) 3:1 00229170

Blow out pump 00060579

Brush with grip dia 13mm HG 00229133Brush with grip dia 18mm HG 00229134Brush with grip dia 28mm HG 00229135

Brush with GA dia 18mm* GA 00229136Brush with GA dia 28mm* GA 00229137Brush with GA dia 38mm* GA 00229673

Brush with GA dia 50mm* GA 00229674 Brush extension with GA* 00229138

Brush adapter (middle section)* 00238727

Overhead wedge HIT-OHW 00387550

Overhead cup (�8-20 mm)# 00387551Overhead cup (� 20 mm above)# 00387552

# Rebar or thread rod diameter* GA= thread connection

HIT

Syst

em

OrderingOrder designation Package content Item No.

Tool kit MD2500 (500ml) Case, dispenser, 2 foil pack holders, blow-out pump, brushes dia. 13, 18 & 28 mm and protective google 00369220

Tool kit MD2000 (330ml) Case, dispenser, 2 foil pack holders, blow-out pump, brushes dia. 13, 18 & 28 mm and protective google 00229155

MD2500 dispenser (500ml) Include 1 dispenser and 1 foil pack holder 00338853

MD2000 dispenser (330ml) Include 1 dispenser and 1 foil pack holder 00229154

Anchoring Systems


7

Special Request

Accessories For long embedment application

Order designation Item No.

HIT Protective goggles 00005205

HIT-DL 20 Air nozzle (dia.20 mm) 00371719HIT-DL 25 Air nozzle (dia.24 mm) 00371720

HIT-DL 32 Air nozzle (dia.32 mm) 00371721

HIT-DRS Dust removal system 00362323

TE-Y RBS Holder for brush extension 00263439 TE-C RBS Holder for brush extension 00263437

HIT-RBS 10/0.7 Bursh extension 00336645 for round steel brush (0.7 m length)

HIT-RB 20 Round steel brush (dia. 20 mm) 00336552 HIT-RB 25 Round steel brush (dia. 25 mm) 00336553 HIT-RB 30 Round steel brush (dia. 30 mm) 00380920 HIT-RB 40 Round steel brush (dia. 40 mm) 00382260

HIT-RB 47 Round steel brush (dia. 47 mm) 00382264 HIT-VL K Coupler for injection extensions 00335021

HIT-SZ 20 Piston Plug (dia. 20 mm) 00335026HIT-SZ 25 Piston Plug (dia. 25 mm) 00335027HIT-SZ 30 Piston Plug (dia. 30 mm) 00380925

HIT-SZ 40 Piston Plug (dia. 40 mm) 00380927HIT-SZ 47 Piston Plug (dia. 47 mm) 00380930

HIT

syst

em

Anchoring Systems


Technical data Loading performance depends on different hollow brick material, please refer to

Fastening Technology Manual

Injection adhesive for masonryHIT-HY 70

Approvals

Applications Heavy duty application on brick works Light duty e.g. bathroom fittings, electrical installations

Base material Hollow brick masonry Solid brick masonry Glass construction/facades Aerated light-weight concrete Composite masonry

Material 2-component ready mix hybrid mortar



40˚C 1 min. 20 min.

30˚C 2 min. 30 min.

20˚C 4 min. 45 min.

10˚C 7 min. 90 min.

AdvantagesOptimized application, comfortable and flexible

For indoor and outdoor applications, as well as for use in dry and wet drilled holes

Can be used at any time of year in a temperature range between -5˚C and + 40˚C

Fastenings are free of expansion forces and approved by technical approval departments

Non-bearing surfaces are effortlessly bridged

High degree of fire resistance

Motar injection control: the user identifies when the correct mortar amount has been injected. Less mortar loss and lower costs per fastening point - with full performance.


HIT-HY 70 / 330 / 2 330 20 2 Mixer 00383677

HIT-HY 70 / 500 / 2 500 20 2 Mixer 00383681

HIT-RE-M mixer - 100 - 00337111

Special Request

Anchor sleeve HIS-N Composite sleeve HIT-SC page 191 page 187


Anchoring Systems


7


For hollow base materials

InsertScrew-on

Clean Clean bore hole : 2x brushing with wire brush

Clean bore hole: 2x blowing Connect

Options• HY 70 + HAS-E / ER + HIT-SC• HY 70 + HIT-V / VR + HIT-SC

Table: Setting detailsHAS-E / ER, HIT-V / VR

Anchor size M6 M8 M10 M12

Sieve sleeve HIT-SC 12x50 12x85 16x50 16x85 16x50 16x85 18x50 18x85

do Drill bit diameter

mm 12 12 16 16 16 16 18 18

ho Hole depth mm 60 95 60 95 60 95 60 95

hef Effective anchoring depth

mm 50 80 50 80 50 80 50 80

hmin Min. base meterials thickness

mm 80 115 80 115 80 115 80 115

df Max. Clearance hole

mm 7 7 9 9 12 12 14 14

Tinst Tightening torque Nm 3 3 3 3 4 4 6 6

Filling volume ml 14 28 20 40 20 40 21 45

MD2000/2500

approx.number

of trigger pulls

2 4 3 6 3 6 3 6

HIT-P8000 D x x 5 9 5 9 5 9

HAS-E / ER and HIT-V / VR with HIT-SC

Anchoring Systems


Clean Clean bore hole : 2x brushing with wire brush

Clean bore hole: 2x blowing

For soild base materials

Options• HY 70 + HAS-E / ER or HIT-V / VR• HY 70 + HIS-N / RN

Table: Setting detailsHIT-V / VR HAS-E / ER HIS-N / RN

Anchor size M8 M10 M12 M8 M10 M12 M16 M8 M10 M12

do Drill bit diameter mm 10 12 14 10 12 14 18 14 18 22

ho Hole depth mm 85 85 85 85 95 115 130 95 115 130

hef Effective anchoring depth

mm 80 80 80 80 90 110 125 90 110 125

hmin Min. base meterials thickness

mm 115 115 115 115 120 140 170 120 150 170

df Max. Clearance hole

mm 9 12 14 9 12 14 18 9 12 14

hs Length of bolt engagement mm - - - - - - -

min.8-max.20

min.10-max.25

min.12-max.30

Tinst Tightening torque Nm 5 8 10 5 8 10 10 5 8 10

Filling volume ml 4 5 7 4 6 10 15 6 10 16

MD 2000/2500approx.number

of trigger pulls

1 1 1 1 1 2 3 1 2 3

HIT-P8000 D x x x x x 3 5 x x 5

HIT-V / VR or HAS-E / ER

hef

hmin

ho

hs

dfTinst

do

HIS-N / RN

Anchoring Systems


7

Threaded Anchor rodsHIT-VA universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth.

Applications Suitable for use in concrete and hard natural stone in combination with HIT-HY

150 and HIT-RE 500 or HIT-RE 500 SD. For use in masonry in combination with HIT-HY 70.

Base material Cracked and uncracked concrete, hard natural stone and masonry.

Advantages Flexibility: Approved embedment depth between 4 to 20 times rod diameter

allows shallow fastenings in thin concrete slaps or walls. Productivity: Use of optimal rod length and diameter saves time and money

per fastening application. Universality: Simplifies your anchor rod inventory by enabling use of the

same rod for various applications and in combination with all HIT injectable mortars.

Approvals:Worldwide approved system (ETA and ICC) for flexible embedment depth from 4 to 20 times rod diameter for M8 to M30 rods.

Head marking: Enables post-installation check of correct anchor setting. The head marking shows the rod length and steel quality.

HIT-RE 500 ETA-04-0027HIT-RE 500-SD ETA-07-0260

Thread dia. Typical embed- Rod length Drill bit dia. Package (mm) ment depth (mm) (mm) (mm) Contents (pcs) Order designation Item no.

M 6 60 75 8 20 HIT-V M 6x 75 00387144M 6 60 105 8 20 HIT-V M 6x105 00387145M 8 80 80 10 20 HIT-V M 8x 80 00387054M 8 80 110 10 20 HIT-V M 8x110 00387055M 8 80 150 10 20 HIT-V M 8x150** 00387056M 10 90 95 12 10 HIT-V M 10x 95 00387057M 10 90 115 12 10 HIT-V M 10x115 00387146M 10 90 130 12 10 HIT-V M 10x130 00387058M 10 90 190 12 10 HIT-V M 10x190** 00387059M 12 110 110 14 10 HIT-V M 12x110 00387060M 12 110 120 14 10 HIT-V M 12x120 00387147M 12 110 150 14 10 HIT-V M 12x150 00387061M 12 110 220 14 10 HIT-V M 12x220** 00387062M 12 110 280 14 10 HIT-V M 12x280** 00387063M 16 125 150 18 5 HIT-V M 16x150 00387064M 16 125 200 18 5 HIT-V M 16x200 00387065M 16 125 300 18 5 HIT-V M 16x300 00387066M 16 125 380 18 5 HIT-V M 16x380** 00387067M 20 170 180 24 10 HIT-V M 20x180 00387068M 20 170 260 24 10 HIT-V M 20x260 00387069M 20 170 380 24 10 HIT-V M 20x380 00387070M 20 170 480 24 10 HIT-V M 20x480 00387071M 24 210 300 28 5 HIT-V M 24x300 00387072M 24 210 450 28 5 HIT-V M 24x450 00387073

** 8.8 grade steel

HIT-V threaded anchor rod

Special Request

Anchoring Systems


HIT-SC composite sleeves Description x length (mm) Material Thread size Package contents Order designation Item no.

M 12x50 Composite M6 20 HIT-SC 12x50 00375979M 12x85 Composite M6 20 HIT-SC 12x85 00375980M 16x50 Composite M8/M10 20 HIT-SC 16x50 00375981M 16x85 Composite M8/M10 20 HIT-SC 16x85 00375982M 18x50 Composite M12 20 HIT-SC 18x50 00360485M 18x85 Composite M12 20 HIT-SC 18x85 00360486

HIT-VR threaded anchor rodA universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth.Stainess steel version complete with nut and washer, A4-70 grade steel.

Thread dia. Typical embed- Rod length Drill bit dia. Package (mm) ment depth (mm) (mm) (mm) contents (pcs) Order designation Item no.

M 8 80 80 10 20 HIT-V-R M 8x 80 00387074M 8 80 110 10 20 HIT-V-R M 8x110 00387075M 8 80 150 10 20 HIT-V-R M 8x150 00387076M 10 90 95 12 10 HIT-V-R M 10x 95 00387077M 10 90 115 12 10 HIT-V-R M 10x115 00387148M 10 90 130 12 10 HIT-V-R M 10x130 00387078 M 10 90 190 12 10 HIT-V-R M 10x190 00387079M 12 110 110 14 10 HIT-V-R M 12x110 00387080M 12 110 120 14 10 HIT-V-R M 12x120 00387149M 12 110 150 14 10 HIT-V-R M 12x150 00387081M 12 110 220 14 10 HIT-V-R M 12x220 00387082M 12 110 280 14 10 HIT-V-R M 12x280 00387083M 16 125 150 18 5 HIT-V-R M 16x150 00387084M 16 125 200 18 5 HIT-V-R M 16x200 00387085M 16 125 300 18 5 HIT-V-R M 16x300 00387086M 16 125 380 18 5 HIT-V-R M 16x380 00387087M 20 170 180 24 10 HIT-V-R M 20x180 00387150M 20 170 260 24 10 HIT-V-R M 20x260 00387088 M 20 170 380 24 10 HIT-V-R M 20x380 00387089M 20 170 480 24 10 HIT-V-R M 20x480 00387151M 24 210 300 28 5 HIT-V-R M 24x300 00387152M 24 210 450 28 5 HIT-V-R M 24x450 00387153

HIT-V-HCR threaded anchor rodA universal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth.High corrosion resistance version (complete with nut and washer), 1.4529 grade steel.

HIT-V-F threaded anchor rodUniversal anchor rod for use with all HIT injectable mortars, enabling flexible embedment depth.Hot dip-galvanized version (complete with nut and washer), 5.8 grade steel.

Anchoring Systems


7

Special Request

Adhesive anchor systemHVA

Applications For heavy duty fastenings with small spacing and edge

For fixing the lamp post, fencing and crash barrier

For fastening anchor rod up to M39

Base material Non-cracked concrete

Hard natural stone

Material Urethane methacrylate resin (styrene-free)

AdvantagesFor fastenings without expansion pressure

User-friendly and odourless (styrene-free)

Lower sensitivity to oversized, dusty and wet holes

A strong foil capsule

Adapts flexibility to fit in irregular holes

Fast curing to enhance productivity

With NSF and WARS approvals for use in contact with drinking water

OrderingOrder designation Capsule length, l (mm) Hole depth h1 (mm) Package (pcs) Item No.HVU M 8x80 110 80 10 00256691HVU M 10x90 110 90 10 00256692HVU M 12x110 127 110 10 00256693HVU M 16x125 140 125 10 00256694HVU M 20x170 170 170 5 00256695HVU M 24x210 200 210 5 00256696HVU M 27x240 225 240 4 00256697HVU M 30x270 260 270 4 00256698HVU M 33x300 290 300 4 00256699HVU M 36x330 320 330 2 00256700HVU M 39x360 350 360 2 00256701

Technical data Recommended load (kN), non-cracked concrete at 25N/mm², safety factor (�) =3

Model Size M8 M10 M12 M16 M20 M24 M27 M30

HVU+Tensile Load, Nrec

5.7 8.7 12.7 20.0 37.3 46.7 62.6 74.7

HAS-E/-EF Shear Load, Vrec

2.8 4.3 6.3 12.0 18.7 26.7 58.0 70.3

HVU+Tensile Load, Nrec

7.6 12.2 17.8 20.0 37.3 46.7 62.6 74.7HAS-ER /HCR Shear Load,

Vrec4.6 7.3 10.7 20.2 31.5 45.3 42.7 51.9

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design, please refer to Fastening Technology Manual


base materialMin time to wait before removing setting tool

Curing time

20 ˚C or above 8 min. 20 min.

10 - 20 ˚C 20 min. 30 min.

0 - 10 ˚C 30 min. 60 min.

-5 - 0 ˚C 60 min. 5 hours

Approvals:

Installation procedures1

For double nut setting, remove the rod adapter only after the cure time was passed.

Put the part to be fastened in place and tighten the nut after the adhesive has completely cured.

If using TE-C-E or TE-Y-E setting tools,immediately tip hammer drill sideways back & forth gently to “break off” the setting tool from the rod or If using double nut setting, leave the rod adapter remaining attached and allow gel time to pass.

Insert the adhesive capsule (HVU) into the hole.

Drive the threaded rod (HAS-E or HAS-ER) into the hole up to the depth of embedment mark using hammer drill with the setting tools (TE-CE or TE-Y-E) or using double nut setting method.

Drill the anchor hole. Clean the drilled hole.

5

5

2

Anchoring Systems


HAS-E ProgrammeHAS-E galvanized version (min. 5µm) Drill bit Tighten. Max. Clear- Width Thread nom. Min. hole Anchorage torque fasten. ance across HVU dia. dia., do depth, h1 depth, hnom Tinst thk. tfix hole, df flats, Sw Capsule Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

M8 10 85 80 15 14 9 13 HVU M8x80 20 HAS-E M8x80/14 00332219M8 10 85 80 15 54 9 13 HVU M8x80 10 HAS-E M8x80/54 00333099M10 12 95 90 30 21 12 17 HVU M10x90 20 HAS-E M10x90/21 00332220M10 12 95 90 30 61 12 17 HVU M10x90 10 HAS-E M10x90/61 00333100M10 12 95 90 30 81 12 17 HVU M10x90 10 HAS-E M10x90/81 00333101M12 14 115 110 50 28 14 19 HVU M12x110 20 HAS-E M12x110/28 00332221M12 14 115 110 50 88 14 19 HVU M12x110 10 HAS-E M12x110/88 00333102M12 14 115 110 50 128 14 19 HVU M12x110 10 HAS-E M12x110/128 00333103M12 14 115 110 50 168 14 19 HVU M12x110 10 HAS-E M12x110/168 00333104M16 18 130 125 100 20 18 24 HVU M16x125 10 HAS-E M16x125/20 00333105M16 18 130 125 100 38 18 24 HVU M16x125 20 HAS-E M16x125/38 00332222M16 18 130 125 100 108 18 24 HVU M16x125 10 HAS-E M16x125/108 00333106M16 18 130 125 100 148 18 24 HVU M16x125 10 HAS-E M16x125/148 00333107M16 18 130 125 100 198 18 24 HVU M16x125 10 HAS-E M16x125/198 00333108M16 18 130 125 100 348 18 24 HVU M16x125 10 HAS-E M16x125/348 00333109M20 24 175 170 160 48 22 30 HVU M20x170 10 HAS-E M20x170/48 00332223M20 24 175 170 160 68 22 30 HVU M20x170 10 HAS-E M20x170/68 00333110M20 24 175 170 160 108 22 30 HVU M20x170 10 HAS-E M20x170/108 00333111M20 24 175 170 160 158 22 30 HVU M20x170 10 HAS-E M20x170/158 00333112M20 24 175 170 160 208 22 30 HVU M20x170 10 HAS-E M20x170/208 00333113M24 28 215 210 240 54 26 36 HVU M24x210 10 HAS-E M24x210/54 00332224M27 30 250 240 270 60 30 41 HVU M27x240 4 HAS-E M27x240/60 00333114M30 35 280 270 300 70 33 46 HVU M30x270 4 HAS-E M30x270/70 00333115M33 37 310 300 1200 80 36 50 HVU M33x300 4 HAS-E M33x300/80 00333116M36 40 340 330 1500 90 39 55 HVU M36x330 2 HAS-E M36x330/90 00333117M39 42 370 360 1800 100 42 59 HVU M39x360 2 HAS-E M39x360/100 00333118

HAS-EF hot dip galvanized version (min. 45µm) M8 10 85 80 15 14 9 13 HVU M8x80 20 HAS-EF M8x80/14 00333143M8 10 85 80 15 54 9 13 HVU M8x80 10 HAS-EF M8x80/54 00333144M10 12 95 90 30 21 12 17 HVU M10x90 20 HAS-EF M10x90/21 00333145M10 12 95 90 30 61 12 17 HVU M10x90 10 HAS-EF M10x90/61 00333146M10 12 95 90 30 81 12 17 HVU M10x90 10 HAS-EF M10x90/81 00333147M12 14 115 110 50 28 14 19 HVU M12x110 10 HAS-EF M12x110/28 00333148M12 14 115 110 50 88 14 19 HVU M12x110 20 HAS-EF M12x110/88 00333149M12 14 115 110 50 128 14 19 HVU M12x110 10 HAS-EF M12x110/128 00333150M12 14 115 110 50 168 14 19 HVU M12x110 10 HAS-EF M12x110/168 00333151M16 18 130 125 100 20 18 24 HVU M16x125 10 HAS-EF M16x125/20 00333152M16 18 130 125 100 38 18 24 HVU M16x125 10 HAS-EF M16x125/38 00333153M16 18 130 125 100 108 18 24 HVU M16x125 10 HAS-EF M16x125/108 00333154M16 18 130 125 100 148 18 24 HVU M16x125 10 HAS-EF M16x125/148 00333155M16 18 130 125 100 198 18 24 HVU M16x125 10 HAS-EF M16x125/198 00333156M16 18 130 125 100 348 18 24 HVU M16x125 10 HAS-EF M16x125/348 00333157M20 24 175 170 160 48 22 30 HVU M20x170 10 HAS-EF M20x170/48 00333158M20 24 175 170 160 68 22 30 HVU M20x170 10 HAS-EF M20x170/68 00333159M20 24 175 170 160 108 22 30 HVU M20x170 10 HAS-EF M20x170/108 00333160M20 24 175 170 160 158 22 30 HVU M20x170 10 HAS-EF M20x170/158 00333161M20 24 175 170 160 208 22 30 HVU M20x170 10 HAS-EF M20x170/208 00333162M24 28 215 210 240 54 26 36 HVU M24x210 10 HAS-EF M24x210/54 00333163M27 30 250 240 270 60 30 41 HVU M27x240 4 HAS-EF M27x240/60 00333164M30 35 280 270 300 70 33 46 HVU M30x270 4 HAS-EF M30x270/70 00333165M33 37 310 300 1200 80 36 50 HVU M33x300 4 HAS-EF M33x300/80 00333166M36 40 340 330 1500 90 39 55 HVU M36x330 2 HAS-EF M36x330/90 00333167M39 42 370 360 1800 100 42 59 HVU M39x360 2 HAS-EF M39x360/100 00333168

Special Request

Materials Steel strength grade 5.8 and 8.8 for M8 to M24 and M27 to M39 respectively,

galvanized at least 5µm Steel strength grade 5.8 and 8.8 for M8 to M24 and M27 to M39 respectively,

hot dip galv. to 45µm A4-70 and A4-50 stainless steel for M8 to M24 and M27 to M39 respectively. High corrosion resistance (HCR) (M8-M24)

Anchor rodHVU with HAS-E

h1 tfix

dfdo

Anchoring Systems


7

HAS-ER A4 stainless steel version Drill bit Anchorage Tighten. Max. Clear- Width Thread nom. Min. hole depth torque fasten. ance across HVU dia. dia., do depth, h1 hnom Tinst thk. tfix hole, df flats, Sw Capsule Package (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs) Order designation Item no.

M8 10 85 80 15 14 9 13 HVU M8x80 20 HAS-ER M8x80/14 00333119M8 10 85 80 15 54 9 13 HVU M8x80 10 HAS-ER M8x80/54 00333120M8 10 85 80 15 114 9 13 HVU M8x80 10 HAS-ER M8x80/114 00333121M10 12 95 90 30 21 12 17 HVU M10x90 20 HAS-ER M10x90/21 00333122M10 12 95 90 30 61 12 17 HVU M10x90 10 HAS-ER M10x90/61 00333123M10 12 95 90 30 81 12 17 HVU M10x90 10 HAS-ER M10x90/81 00333124M10 12 95 90 30 111 12 17 HVU M10x90 10 HAS-ER M10x90/111 00333125M12 14 115 110 50 28 14 19 HVU M12x110 20 HAS-ER M12x110/28 00333126M12 14 115 110 50 88 14 19 HVU M12x110 10 HAS-ER M12x110/88 00333127M12 14 115 110 50 128 14 19 HVU M12x110 10 HAS-ER M12x110/128 00333128M12 14 115 110 50 168 14 19 HVU M12x110 10 HAS-ER M12x110/168 00333129M16 18 130 125 100 20 18 24 HVU M16x125 10 HAS-ER M16x125/20 00333130M16 18 130 125 100 38 18 24 HVU M16x125 20 HAS-ER M16x125/38 00333131M16 18 130 125 100 108 18 24 HVU M16x125 10 HAS-ER M16x125/108 00333132M16 18 130 125 100 148 18 24 HVU M16x125 10 HAS-ER M16x125/148 00333133M16 18 130 125 100 198 18 24 HVU M16x125 10 HAS-ER M16x125/198 00333134M20 24 175 170 160 48 22 30 HVU M20x170 10 HAS-ER M20x170/48 00333135M20 24 175 170 160 108 22 30 HVU M20x170 10 HAS-ER M20x170/108 00333136M24 28 215 210 240 54 26 36 HVU M24x210 10 HAS-ER M24x210/54 00333137M27 30 250 240 270 60 30 41 HVU M27x240 4 HAS-ER M27x240/60 00333138M30 35 280 270 300 70 33 46 HVU M30x270 4 HAS-ER M30x270/70 00333139M33 37 310 300 1200 80 36 50 HVU M33x300 4 HAS-ER M33x300/80 00333140M36 40 340 330 1500 90 39 55 HVU M36x330 2 HAS-ER M36x330/90 00333141M39 42 370 360 1800 100 42 59 HVU M39x360 2 HAS-ER M39x360/100 00333142

Special Request

HAS-HCR high corrosion resistance materialM8 10 85 80 15 14 9 13 HVU M8x80 20 HAS-HCR M8x80/14 00229504M10 12 95 90 30 21 12 17 HVU M10x90 10 HAS-HCR M10x90/21 00229505M12 14 115 110 50 28 14 19 HVU M12x110 10 HAS-HCR M12x110/28 00229506M16 18 130 125 100 38 18 24 HVU M16x125 5 HAS-HCR M16x125/38 00229507M20 24 175 170 160 48 22 30 HVU M20x170 5 HAS-HCR M20x170/48 00229508M24 28 215 210 240 54 26 36 HVU M24x210 5 HAS-HCR M24x210/54 00229509

Required tools Anchor TE adapter Package Square socket Package Anchor description Order designation (pcs) Item no. Order designation (pcs) Item no.

HVU M8 + HAS-E / -EF / -ER M8 TE-C 1/2" 1 00032220 Socket 13x1/2" (M8) 1 00060186HVU M10 + HAS-E / -EF / -ER M10 TE-C 1/2" 1 00032220 Socket 17x1/2" (M10) 1 00060187HVU M12 + HAS-E / -EF / -ER M12 TE-C 1/2" 1 00032220 Socket 19x1/2" (M12) 1 00060188HVU M16 + HAS-E / -EF / -ER M16 TE-FY 3/4" 1 00032221 Socket 24x3/4" (M16) 1 00060190HVU M20 + HAS-E / -EF / -ER M20 TE-FY 3/4" 1 00032221 Socket 30x3/4" (M20) 1 00060191HVU M24 + HAS-E / -EF / -ER M24 TE-FY 3/4" 1 00032221 Socket 36x3/4" (M24) 1 03403094HVU M27 + HAS-E / -EF / -ER M27 BU 3/4" 1 00308848 Socket 41x3/4" (M27) - -HVU M30 + HAS-E / -EF / -ER M30 BU 3/4" 1 00308848 Socket 46x3/4" (M30) - -HVU M33 + HAS-E / -EF / -ER M33 BU 3/4" 1 00308848 Socket 50x3/4" (M33) - -HVU M36 + HAS-E / -EF / -ER M36 BU 3/4" 1 00308848 Socket 55x3/4" (M36) - -HVU M39 + HAS-E / -EF / -ER M39 BU 3/4" 1 00308848 Socket 59x3/4" (M39) - -

Anchor HAS-E Setting tool Package Anchor description Order designation (pcs) Item no.

HVU M8 + HAS-E / -EF / -ER M8 TE-C-E M8 1 00369223 HVU M10 + HAS-E / -EF / -ER M10 TE-C-E M10 1 00369224 HVU M12 + HAS-E / -EF / -ER M12 TE-C-E M12 1 00369225 HVU M16 + HAS-E / -EF / -ER M16 TE-C-E M16 1 00369226 HVU M16 + HAS-E / -EF / -ER M16 TE-Y-E M16 1 00369227 HVU M20 + HAS-E / -EF / -ER M20 TE-Y-E M20 1 00369228 HVU M24 + HAS-E / -EF / -ER M24 TE-Y-E M24 1 00369229

Anchoring Systems


h1

df

hs

do



HVU + HIS-NTensile Load, Nrec 8.3 13.3 20.0 31.7 36.3

Shear Load, Vrec 4.3 7.7 13.0 19.7 18.3

HVU + HIS-RNTensile Load, Nrec 8.3 13.3 19.7 31.7 46.7

Shear Load, Vrec 4.3 6.7 10.0 18.3 27.7


Anchor sleeveHVU with HIS-N

HIS-N Programme: HIS-N galvanized version (min. 5µm) Screw Drill bit Tighten. depth, Clear- Thread nom. Min. hole Anchorage torque hs (min) / ance dia. dia., do depth,h1 depth, hnom Tinst hs (max) hole, df HVU capsule Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

M8 14 95 90 15 8 / 20 9 HVU M10x90 10 HIS-N M8x90 00258015M10 18 115 110 28 10 / 25 12 HVU M12x110 10 HIS-N M10x110 00258016M12 22 130 125 50 12 / 30 14 HVU M16x125 5 HIS-N M12x125 00258017M16 28 175 170 85 16 / 40 18 HVU M20x170 5 HIS-N M16x170 00258018M20 32 210 205 170 20 / 50 22 HVU M24x210 5 HIS-N M20x205 00258019

HIS-RN A4 stainless steel M8 14 95 90 12 8 / 20 9 HVU M10x90 10 HIS-RN M8x90 00258024 M10 18 115 110 23 10 / 25 12 HVU M12x110 10 HIS-RN M10x110 00258025 M12 22 130 125 40 12 / 30 14 HVU M16x125 5 HIS-RN M12x125 00258026 M16 28 175 170 70 16 / 40 18 HVU M20x170 5 HIS-RN M16x170 00258027 M20 32 210 205 130 20 / 50 22 HVU M24x210 5 HIS-RN M20x205 00258028

Required tools Anchor TE adapter Package Square socket Package Setting tools Package Anchor description Order designation (pcs) Item no. Order designation (pcs) Item no. Order designation (pcs) Item no.

HVU M10 + HIS-N / -RN M8 TE-C 1/2" 1 00032220 Socket 13x1/2" (M8) 1 00060186 HIS-S M8 1 00045964HVU M12 + HIS-N / -RN M10 TE-C 1/2" 1 00032220 Socket 17x1/2" (M10) 1 00060187 HIS-S M10 1 00045965HVU M16 + HIS-N / -RN M12 TE-C 1/2" 1 00032220 Socket 19x1/2" (M12) 1 00060188 HIS-S M12 1 00045966HVU M20 + HIS-N / -RN M16 TE-FY 3/4" 1 00032221 Socket 24x3/4" (M16) 1 00060190 HIS-S M16 1 00045967HVU M24 + HIS-N / -RN M20 TE-FY 3/4" 1 00032221 Socket 30x3/4" (M20) 1 00060191 HIS-S M20 1 00045968

Materials Carbon steel galvanized at least 5µm (M8-M20) A4-70 stainless steel (M8-M20)

Special Request

Insert the adhesive capsule (HVU) into the hole.

Set the anchor sleeve (HIS-N or HIS-RN) by using hammer drill with HIS-S setting tools such that it is flush with the base material surface.

Drill the anchor hole. Clean the drilled hole with the blow-out pump.

Put the part to be fastened in place and fasten the part using bolt or others.

Leave the setting tools or rod adapter remaining attached and remove it only the cure time was passed.

Installation procedures6

Anchoring Systems


7

AdvantagesSelf undercutting anchor: Simple and quick undercutting operation results in a keying effect for maximum security even in cracked concrete

Allows small spacing and edge distances: Low expansion forces-performs like a cast-in headed stud

Simple installation: No complicated, specialized undercutting tools required

Built-in setting control for reliable installation

Load can be applied immediately after setting: Fully removable

Self-undercut anchorHDA

HDA-T/-TR/-TF

Markingdf

tfixhefhmin

l

Applications For fastening heavy loads, e.g. structural canopy, steel construction and curtain

wall, etc. Dynamic conditions, e.g. with vibratory or windy condition

Base material Cracked or non-cracked concrete

Hard natural stone

Material Steel Strength 8.8, galvanized 5µm (M10-M20) Steel Strength 8.8, sherardized 53µm (M10-M16) Stainless Steel A4-80 (M10-M16)



HDA-T/ HDA-TFTensile Load, Nrec 15.3 22.3 42.0 64.0

Shear Load, Vrec 21.7 26.7 46.7 68.3

HDA-TRTensile Load, Nrec 15.3 22.3 42.0 -

Shear Load, Vrec 23.7 29.0 50.7 -

HDA-P/ HDA-PFTensile Load, Nrec 15.3 22.3 42.0 64.0

Shear Load, Vrec 7.3 10.0 20.6 30.6

HDA-PRTensile Load, Nrec 15.3 22.3 42.0 -

Shear Load, Vrec 7.6 11.3 21.0 -

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method and cracked concrete information, please refer to Fastening Technology Manual3) M20 version is only available to galvanized 5µm, i.e. HDA-T / HDA-P


Drill hole with stop drill bit.

Drill hole with stop drill bit.

Blow out dust and fragments

Blow out dust and fragments

Expand anchor with setting tool in a hammer drill

HDA-T / -TR / TF

HDA-P / -PR / PF

Expand anchor with setting tool in a hammer drill

Approvals

HDA-P/-PR/-PF

df

tfixhefhmin

l

Anchoring Systems


Anchor TE 24/ TE 35 TE 40/ TE 56/ TE 60/ TE 70/ TE 75 TE 76/ TE80-ATC Stop drill bit Setting tool TE 25 TE40-AVR TE56-ATC TE60-ATC TE70-ATC TE76-ATC

(1st gear) max. hammering power TE-C-HDA-B 20x100 TE-C-HDA-ST 20 M10

TE-Y-HDA-B 20x100 TE-Y-HDA-ST 20 M10 TE-C-HDA-B 20x120 TE-C-HDA-ST 20 M10





TE-Y-HDA-B 22x175 TE-Y-HDA-ST 22 M12HDA-P 30-M16x190/40 TE-Y-HDA-B 30x190 HDA-T 30-M16x190/40 TE-Y-HDA-B 30x230 HDA-P 30-M16x190/60 TE-Y-HDA-B 30x190

TE-Y-HDA-ST 30 M16

HDA-T 30-M16x190/60 TE-Y-HDA-B 30x250HDA-P 37-M20x250/50 TE-Y-HDA-B 37x250 HDA-T 37-M20x250/50 TE-Y-HDA-B 37x300 HDA-P 37-M20x250/100 TE-Y-HDA-B 37x250

TE-Y-HDA-ST 37 M20

HDA-T 37-M20x250/100 TE-Y-HDA-B 37x350

HDA-P22-M12x125/30

HDA-T22-M12x125/30

HDA-P22-M12x125/50

HDA-T22-M12x125/50

HDA-P20-M10x100/20

HDA-T20-M10x100/20

Anchor TE 24/ TE 35 TE 40/ TE 56 TE 60/ TE 70/ TE 75 TE 76/ TE80-ATC Stop drill bit Setting tool TE 25 TE40-AVR TE56-ATC TE60-ATC TE70-ATC TE76-ATC







TE-Y-HDA-B 22x175 TE-Y-HDA-ST 22 M12HDA-PF30-M16x190/40 TE-Y-HDA-B 30x190 HDA-TF30-M16x190/40 TE-Y-HDA-B 30x230 HDA-PF30-M16x190/60 TE-Y-HDA-B 30x190

TE-Y-HDA-ST 30 M16

HDA-TF30-M16x190/60 TE-Y-HDA-B 30x250

HDA-PF20-M10x100/20

HDA-TF20-M10x100/20

HDA-PF22-M12x125/30

HDA-TF22-M12x125/30

HDA-PF22-M12x125/50

HDA-TF22-M12x125/50

Tool and machinesHDA-T and HDA-P (Galvanized version 5µm)

HDA-TR and HDA-PR (Stainless steel version A4-80)Anchor TE 24/ TE 35 TE 40/ TE 56 TE 60/ TE 70/ TE 75 TE 76/ TE80-ATC Stop drill bit Setting tool TE 25 TE40-AVR TE56-ATC TE60-ATC TE70-ATC TE76-ATC







TE-Y-HDA-B 22x175 TE-Y-HDA-ST 22 M12HDA-PR30-M16x190/40 TE-Y-HDA-B 30x190 HDA-TR30-M16x190/40 TE-Y-HDA-B 30x230 HDA-PR30-M16x190/60 TE-Y-HDA-B 30x190

TE-Y-HDA-ST 30 M16

HDA-TR30-M16x190/60 TE-Y-HDA-B 30x250

HDA-PR20-M10x100/20

HDA-TR20-M10x100/20

HDA-PR22-M12x125/30

HDA-TR22-M12x125/30

HDA-PR22-M12x125/50

HDA-TR22-M12x125/50

HDA-TF and HDA-PF (Sherardized version 53µm)

Anchoring Systems


7

HDA ProgrammeHDA-T galvanized version (min. 5µm) Min base Drill bit material Anchorage Anchor Tighten. Max. Clear- Width nom. thickness, depth, length, Head torque fasten. ance across dia., do hmin hef I mark Tinst thk. tfix hole, df flats,Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

20 170 100 150 I 50 20 21 17 12 HDA-T 20-M10x100/20 0033154522 190 125 190 L 80 30 23 19 8 HDA-T 22-M12x125/30 0033154822 190 125 210 N 80 50 23 19 8 HDA-T 22-M12x125/50 0033154930 270 190 275 R 120 40 32 24 4 HDA-T 30-M16x190/40 0033155230 270 190 295 S 120 60 32 24 4 HDA-T 30-M16x190/60 0033155337 350 250 360 V 300 50 40 30 2 HDA-T 37-M20x250/50 0033926737 350 250 410 X 300 100 40 30 2 HDA-T 37-M20x250/100 00339268

Special Request

HDA-TF sherardized version (min. 53µm)

20 170 100 150 I 50 20 21 17 12 HDA-TF 20-M10x100/20 0041290322 190 125 190 L 80 30 23 19 8 HDA-TF 22-M12x125/30 0041290422 190 125 210 N 80 50 23 19 8 HDA-TF 22-M12x125/50 0041290530 270 190 275 R 120 40 32 24 4 HDA-TF 30-M16x190/40 0033936430 270 190 295 S 120 60 32 24 4 HDA-TF 30-M16x190/60 00339365

HDA-P galvanized version (min. 5µm)20 170 100 150 I 50 20 12 17 12 HDA-P 20-M10x100/20 0033154422 190 125 190 L 80 30 14 19 8 HDA-P 22-M12x125/30 0033154622 190 125 210 N 80 50 14 19 8 HDA-P 22-M12x125/50 0033154730 270 190 275 R 120 40 18 24 4 HDA-P 30-M16x190/40 0033155030 270 190 295 S 120 60 18 24 4 HDA-P 30-M16x190/60 0033155137 350 250 360 V 300 50 22 30 2 HDA-P 37-M20x250/50 0033926537 350 250 410 X 300 100 22 30 2 HDA-P 37-M20x250/100 00339266

HDA-PR A4-80 stainless steel version

20 170 100 150 I 50 20 12 17 12 HDA-PR 20-M10x100/20 0033934622 190 125 190 L 80 30 14 19 8 HDA-PR 22-M12x125/30 0033934722 190 125 210 N 80 50 14 19 8 HDA-PR 22-M12x125/50 0033934830 270 190 275 R 120 40 18 24 4 HDA-PR 30-M16x190/40 0033934930 270 190 295 S 120 60 18 24 4 HDA-PR 30-M16x190/60 00339350

HDA-PF sherardized version (min. 53µm)20 170 100 150 I 50 20 12 17 12 HDA-PF 20-M10x100/20 0041290022 190 125 190 L 80 30 14 19 8 HDA-PF 22-M12x125/30 0041290122 190 125 210 N 80 50 14 19 8 HDA-PF 22-M12x125/50 0041290230 270 190 275 R 120 40 18 24 4 HDA-PF 30-M16x190/40 0033935930 270 190 295 S 120 60 18 24 4 HDA-PF 30-M16x190/60 00339360

HDA-TR A4-80 stainless steel version 20 170 100 150 I 50 20 21 17 12 HDA-TR 20-M10x100/20 0033935122 190 125 190 L 80 30 23 19 8 HDA-TR 22-M12x125/30 0033935222 190 125 210 N 80 50 23 19 8 HDA-TR 22-M12x125/50 0033935330 270 190 275 R 120 40 32 24 4 HDA-TR 30-M16x190/40 0033935430 270 190 295 S 120 60 32 24 4 HDA-TR 30-M16x190/60 00339355

Anchoring Systems


Required toolsStop drill bit Package

Order designation (pcs) Item no.

TE-C-HDA-B 20x100 1 00332089 TE-Y-HDA-B 20x100 1 00237449 TE-C-HDA-B 20x120 1 00332090 TE-Y-HDA-B 20x120 1 00237450 TE-C-HDA-B 22x125 1 00402050 TE-Y-HDA-B 22x125 1 00402055 TE-C-HDA-B 22x155 1 00402056 TE-Y-HDA-B 22x155 1 00402058 TE-C-HDA-B 22x175 1 00402060 TE-Y-HDA-B 22x175 1 00402062 TE-C-HDA-B 30x190 1 00332097 TE-Y-HDA-B 30x230 1 00332098 TE-C-HDA-B 30x250 1 00332099 TE-Y-HDA-B 37x250 1 00339270 TE-C-HDA-B 37x300 1 00339271 TE-Y-HDA-B 37x350 1 00339272

Setting tool Package Order designation (pcs) Item no.

TE-C-HDA-ST 20-M10 1 00331843 TE-Y-HDA-ST 20-M10 1 00287133 TE-C-HDA-ST 22-M12 1 00331844 TE-Y-HDA-ST 22-M12 1 00287134 TE-Y-HDA-ST 30-M16 1 00331846 TE-Y-HDA-ST 37-M20 1 00339269

Accessories Anchor Removl tool Package Grinding tool Package Anchor description Order designation (pcs) Item no. Order designation (pcs) Item no.

HDA-T / -P M10 TE-C-HDA-RT 20-M10 1 00333433 TE-C-HDA-GT 20 1 00333439HDA-T / -P M12 TE-C-HDA-RT 22-M12 1 00333434 TE-C-HDA-GT 22 1 00333440HDA-T / -P M16 TE-C-HDA-RT 30-M16 1 00333435 TE-C-HDA-GT 30 1 00333441

HDA-T / -P M20 TE-C-HDA-RT 37-M20 1 00339273 - -

Anchoring Systems


7

Special Request

Applications Anchoring dynamic loads, e.g. elevator installation, conveyor systems, cranes,

machine and plant installation

Base material Cracked and uncracked concrete (Approval: Z-21.1-1693)

Material Dynamic set: electrogalvanized steel

Dynamic set

The HDA dynamic undercut anchor system

HDA-T or HDA-P + dynamic set + Hilti HIT-HY150 undercut anchor hybrid mortar

*

Z-21.1-1693Hilti

Institut fürMassivbauTechnischeUniversitätDarmstadt

AdvantagesEasy to install, even for multiple fastenings

Optimum load transfer through injection of Hilti HIT-HY 150 and use of concave washer

Approvals for an unlimited number of load cycles

Uses the standard HDA undercut anchor in conjunction with a special dynamic set and Hilti HIT-HY 150

For proper installation of HDA anchor and proper use of HIT-HY 150, contact Hilti

* Diameter of large washer M10: 42 mm, M12: 44 mm, M16: 52 mm, M20: 60 mm

Setting instructions

OrderingOrder designation Package (pcs) Item No.

Dynamic-Set M10 2 00369201




Anchoring Systems


hef

h1

I

df

tfix

Tinstdo

Heavy duty anchorHSL-3

HSL-3 programmeHSL-3: hexagon bolt head (galv. to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor torque fasten. ance across dia.,do depth, h1 depth, hef length, I Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

12 80 60 83 25 5 14 13 40 HSL-3 M8/5 0037177412 80 60 98 25 20 14 13 40 HSL-3 M8/20 0037177512 80 60 118 25 40 14 13 40 HSL-3 M8/40 0037177615 90 70 95 50 5 17 17 20 HSL-3 M10/5 0037177715 90 70 110 50 20 17 17 20 HSL-3 M10/20 0037177815 90 70 130 50 40 17 17 20 HSL-3 M10/40 0037177918 105 80 111 80 5 20 19 20 HSL-3 M12/5 0037178018 105 80 131 80 25 20 19 20 HSL-3 M12/25 0037178118 105 80 156 80 50 20 19 10 HSL-3 M12/50 0037178224 125 100 138 120 10 26 24 10 HSL-3 M16/10 0037178324 125 100 153 120 25 26 24 10 HSL-3 M16/25 0037178424 125 100 178 120 50 26 24 10 HSL-3 M16/50 00371785

Applications For fastening heavy loads, e.g. structural steel works, machine and catch-fence

For fastening window wall, curtain wall, skylight and canopy

Dynamic conditions, e.g. with vibratory or windy condition

Base material Cracked (for HSL-3 only) or non-cracked concrete

Hard natural stone

Material Steel Strength grade 8.8, galvanized at least 5µm (M8-M24)

A4-70 stainless steel (M8-M20)

AdvantagesThe design of black plastic section to prevent the self-rotation in hole during setting and collapse for flushing baseplate to the surface

Five different head types for choice

The red cap shear-off with correct torque (HSL-3-B)

Embedment depth mark for easy setting



HSL-3 / HSL-3-B / Tensile Load, Nrec 7.8 9.8 12.0 16.8 23.5 30.9HSL-3-SK / HSL-3-SH Shear Load, Vrec 10.4 16.4 23.9 33.6 47.0 59.1

HSL-3-GTensile Load, Nrec 7.8 9.8 12.0 16.8 23.5 -

Shear Load, Vrec 8.7 11.6 18.1 28.6 47.0 -

HSL-GR Tensile Load, Nrec 7.5 10.9 13.2 19.9 27.4 -

Shear Load, Vrec 7.7 12.2 17.7 33.0 51.5 -

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method and cracked concrete information, please refer to Fastening Technology Manual3) HSL-3-SK and HSL-3-SH are only available up to M12

VdS

Approvals


Drill hole. Blow out dust and fragments. Install anchor. Apply tightening torque (for HSL-3-B: no torque wrench is needed).

Anchoring Systems


7

Special Request

HSL-3: hexagon bolt head (galv. to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor torque fasten. ance across dia., do depth, h1 depth, hef length, I Tinst thk. tfix hole, df flats, Sw Package (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs) Order designation Item no.

28 155 125 163 200 10 31 30 6 HSL-3 M20/10 0037178628 155 125 183 200 30 31 30 6 HSL-3 M20/30 0037178728 155 125 213 200 60 31 30 6 HSL-3 M20/60 0037178832 180 150 185 250 10 35 36 4 HSL-3 M24/10 0037178932 180 150 205 250 30 35 36 4 HSL-3 M24/30 0037179032 180 150 235 250 60 35 36 4 HSL-3 M24/60 00371791

HSL-3-B: torque control head (galv. to min. 5µm)18 105 80 117 - 5 20 24 20 HSL-3-B M12/5 0037180718 105 80 137 - 25 20 24 20 HSL-3-B M12/25 0037180818 105 80 162 - 50 20 24 10 HSL-3-B M12/50 0037180924 125 100 144 - 10 26 30 10 HSL-3-B M16/10 0037181024 125 100 159 - 25 26 30 10 HSL-3-B M16/25 0037181124 125 100 184 - 50 26 30 10 HSL-3-B M16/50 0037181228 155 125 169 - 10 31 36 6 HSL-3-B M20/10 0037181328 155 125 189 - 30 31 36 6 HSL-3-B M20/30 0037181428 155 125 219 - 60 31 36 6 HSL-3-B M20/60 0037181532 180 150 191 - 10 35 41 4 HSL-3-B M24/10 0037181632 180 150 211 - 30 35 41 4 HSL-3-B M24/30 0037181732 180 150 241 - 60 35 41 4 HSL-3-B M24/60 00371818

HSL-3-G: stud head (galv. to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor torque fasten. ance across dia., do depth, h1 depth, hef length, I Tinst thk. tfix hole, df flats, Sw Package (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs) Order designation Item no.

12 80 60 87 20 5 14 13 40 HSL-3-G M8/5 0037179212 80 60 102 20 20 14 13 40 HSL-3-G M8/20 0037179312 80 60 122 20 40 14 13 40 HSL-3-G M8/40 0037179412 80 60 182 20 100 14 13 20 HSL-3-G M8/100 0037182915 90 70 100 35 5 17 17 20 HSL-3-G M10/5 0037179515 90 70 115 35 20 17 17 20 HSL-3-G M10/20 0037179615 90 70 135 35 40 17 17 20 HSL-3-G M10/40 0037179715 90 70 195 35 100 17 17 20 HSL-3-G M10/100 0037183018 105 80 119 60 5 20 19 20 HSL-3-G M12/5 0037179818 105 80 139 60 25 20 19 20 HSL-3-G M12/25 0037179918 105 80 164 60 50 20 19 10 HSL-3-G M12/50 0037180018 105 80 214 60 100 20 19 10 HSL-3-G M12/100 0037183124 125 100 148 80 10 26 24 10 HSL-3-G M16/10 0037180124 125 100 163 80 25 26 24 10 HSL-3-G M16/25 0037180224 125 100 188 80 50 26 24 10 HSL-3-G M16/50 0037180324 125 100 238 80 100 26 24 10 HSL-3-G M16/100 0037183228 155 125 170 160 10 31 30 6 HSL-3-G M20/10 0037180428 155 125 190 160 30 31 30 6 HSL-3-G M20/30 0037180528 155 125 220 160 60 31 30 6 HSL-3-G M20/60 0037180628 155 125 260 160 100 31 30 6 HSL-3-G M20/100 00371833

HSL-3-SK: countersunk head (galv. to min. 5µm)12 80 60 80 25 10 14 5 40 HSL-3-SK M8/10 0037182512 80 60 90 25 20 14 5 40 HSL-3-SK M8/20 0037182615 90 70 100 50 20 17 6 20 HSL-3-SK M10/20 0037182718 105 80 120 80 25 20 8 20 HSL-3-SK M12/25 00371828

Anchoring Systems


HSL-3-SH: socket head (galv. to min. 5µm)

Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor torque fasten. ance across dia., do depth, h1 depth, hef length, I Tinst thk. tfix hole, df flats, Sw Package (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs) Order designation Item no.

12 85 60 88 25 5 14 6 40 HSL-3-SH M8/5 0037734115 95 70 120 35 20 17 8 20 HSL-3-SH M10/20 0037734218 110 80 142 60 25 20 10 20 HSL-3-SH M12/25 00377343

HSL-GR: stud head (A4 stainless steel)

12 80 65 102 25 20 14 13 40 HSL-GR M8/20 0006792012 80 65 122 25 40 14 13 40 HSL-GR M8/40 0007873015 90 75 115 40 20 17 17 20 HSL-GR M10/20 0006792215 90 75 135 40 40 17 17 20 HSL-GR M10/40 0007826218 100 80 125 80 25 20 19 20 HSL-GR M12/25 0006792418 100 80 150 80 50 20 19 20 HSL-GR M12/50 0007826524 125 105 157 120 25 26 24 10 HSL-GR M16/25 0006792624 125 105 182 120 50 26 24 10 HSL-GR M16/50 0007817728 155 130 190 200 30 31 30 6 HSL-GR M20/30 0006792828 155 130 220 200 60 31 30 6 HSL-GR M20/60 00078182

Anchoring Systems


7

Safety anchorHSC

Installation procedureshef

h1

I

df

tfix

do

hef

h1

IS

df

tfix

do

Approvals

Applications Fastening where safety is at stake e.g. to secure cladding and facades,

installation and ceiling with low embedment depth and small edge and spacing distance

Base material Cracked or non-cracked concrete

Hard natural stone

Material Steel strength grade 8.8, galvanized at least 5 µm (M6-M12)

A4 stainless steel (M6-M12)


Model Size M8x40 M8x50 M10x40 M12x60

HSC-ATensile Load, Nrec 4.3 5.9 4.3 7.8

Shear Load, Vrec 4.9 4.9 7.7 11.2

HSC-ARTensile Load, Nrec 4.3 5.9 4.3 7.8

Shear Load, Vrec 4.3 4.3 6.8 9.8

Model Size M6x40 M8x40 M10x50 M10x60 M12x60

HSC-lTensile Load, Nrec 4.3 4.3 5.9 7.8 7.8

Shear Load, Vrec 2.7 4.1 5.1 5.1 6.1

HSC-lRTensile Load, Nrec 4.3 4.3 5.9 7.8 7.8

Shear Load, Vrec 2.3 3.6 4.4 4.4 5.3

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method and cracked concrete information, please refer to Fastening Technology Manual

AdvantagesAutomatic undercutting by anchor when anchor sleeve is driven onto stud taper

Reliable performance with short embedment depth

Flexible in design with short spacing and edge distance required

VdS

Insert type I anchor into hole. Set with setting tool. Secure part being fastened.

Drill hole with stop drill bit. Blow out dust and fragments. Insert type A anchor into hole. Check setting of type A anchor.

Check setting of type I anchor.

Anchoring Systems


HSC-AR: stud head (A4 stainless steel) 14 46.0 40 71.5 10 15 9 13 25 HSC-AR M8x40/15 0003114814 56.0 50 81.5 10 15 9 13 25 HSC-AR M8x50/15 0003115016 46.5 40 79.5 20 20 12 17 25 HSC-AR M10x40/20 0003114918 68.0 60 103.5 30 20 14 19 20 HSC-AR M12x60/20 00015506

HSC programmeHSC-A: stud head (galv. to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor torque fasten. ance across dia., do depth, h1 depth, hef length, I Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

14 46.0 40 71.5 10 15 9 13 25 HSC-A M8x40/15 0003113914 56.0 50 81.5 10 15 9 13 25 HSC-A M8x50/15 0003114116 46.5 40 79.5 20 20 12 17 25 HSC-A M10x40/20 0003114018 68.0 60 103.5 30 20 14 19 20 HSC-A M12x60/20 00015507

Special Request

Required toolsTE 7-C/ TE 16/ TE25 TE30 TE35 TE 40/

Anchor TE 7-A 16-C/16-M TE30-C-AVR 40-AVR Stop drill bit Package Setting tool Package Anchor description TE30-M-AVR Order designation (pcs) Item no. Order designation (pcs) Item no.

HSC-A / -AR M8x40/15 TE-C HSC-B 14x40 1 00031157 TE-C HSC-MW 14 1 00031169HSC-A / -AR M8x50/15 TE-C HSC-B 14x50 1 00031158 TE-C HSC-MW 14 1 00031169HSC-A / -AR M10x40/20 TE-C HSC-B 16x40 1 00028568 TE-C HSC-MW 16 1 00011267

HSC-A / -AR M12x60/20 TE-C HSC-B 18x60 1 00030709 TE-C HSC-MW 18 1 00071352

HSC-I / -IR M6x40 TE-C HSC-B 14x40 1 00031157 TE-C HSC-MW 14 1 00031169 HSC-I / -IR M8x40 TE-C HSC-B 16x40 1 00028568 TE-C HSC-MW 16 1 00011267 HSC-I / -IR M10x50 TE-C HSC-B 18x50 1 00030708 TE-C HSC-MW 18 1 00071352 HSC-I / -IR M10x60 TE-C HSC-B 18x60 1 00030709 TE-C HSC-MW 18 1 00071352 HSC-I / -IR M12x60 TE-C HSC-B 20x60 1 00030710 TE-C HSC-MW 20 1 00071353

HSC-I: internal thread (galv. to min. 5µm) Drill bit Tighten. Clear- Width nom. Min. hole Anchorage Anchor torque Screw depth ance across dia., do depth, h1 depth, hef length, I Tinst Smin / Smax hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

14 46.0 40 43.0 10 6 / 16 7 10 25 HSC-I M6x40 0003114216 46.5 40 43.5 10 8 / 22 9 13 25 HSC-I M8x40 0003114318 56.0 50 54.5 20 10 / 28 12 17 25 HSC-I M10x50 0003114418 68.0 60 64.5 30 10 / 28 12 17 25 HSC-I M10x60 0003114520 68.5 60 64.5 30 12 / 30 14 19 25 HSC-I M12x60 00031146

HSC-IR: internal thread (A4 stainless steel)

14 46.0 40 43.0 10 6 / 16 7 10 25 HSC-IR M6x40 0003115116 46.5 40 43.5 10 8 / 22 9 13 25 HSC-IR M8x40 0003115218 56.0 50 54.5 20 10 / 28 12 17 25 HSC-IR M10x50 0003115318 68.0 60 64.5 30 10 / 28 12 17 25 HSC-IR M10x60 0003115420 68.5 60 64.5 30 12 / 30 14 19 25 HSC-IR M12x60 00031155

Anchoring Systems


7


Blow out dust and fragments. Install anchor. Apply tightening torque.Drill hole with drill bit.

Marking

hefh1

I

df

tfix

Tinstdo

Special Request

HST programmeHST: stud head (galv to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor Head torque fasten. ance across dia., do depth, h1 depth,hef length, I mark Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

8 65 47 75 C 20 10 9 13 100 HST M8x75/10 003715818 65 47 95 E 20 30 9 13 80 HST M8x95/30 002953788 65 47 115 G 20 50 9 13 50 HST M8x115/50 0037158310 80 60 90 E 45 10 12 17 50 HST M10x90/10 0037158410 80 60 110 F 45 30 12 17 40 HST M10x110/30 0029536710 80 60 130 H 45 50 12 17 25 HST M10x130/50 0037158610 80 60 160 J 45 80 12 17 25 HST M10x160/80 0027272710 80 60 200 M 45 120 12 17 25 HST M10x200/120 0027273110 80 60 295 S 45 200 12 17 25 HST M10x295/200 0027273512 95 70 115 G 60 20 14 19 25 HST M12x115/20 0037158712 95 70 145 I 60 50 14 19 25 HST M12x145/50 0037158812 95 70 185 L 60 90 14 19 25 HST M12x185/90 00371589

ApplicationsFor fastening cladding works and facades, shopfronts, balustrades, window wall and steel works

Basic material Cracked or non-cracked concrete Hard natural stone

Material Steel galvanized at least 5 µm (M8-M24) A4 stainless steel (M8-M24) High corrosion resistance (HCR) (M8-M16)

Stud anchorHST

AdvantagesThe special expansion-sleeve ensures automatic follow-up expansion in cracks

Stainless steel stud anchors are coated to prevent binding between bolt and segment, as well as bolt and nut. This ensures that the anchor can be tightened and loosened without problems

Due to the cold-forming technology manufacturing process, the anchor material remain ductile. The result is an anchor which allows alignment without breaking

Head mark with letter code for accurate identification when in place



HSTTensile Load, Nrec 3.0 5.3 6.7 11.7 16.7 20.0

Shear Load, Vrec 4.7 7.8 11.7 18.3 28.0 31.3

HST-RTensile Load, Nrec 3.0 5.3 6.7 11.7 16.7 20.0

Shear Load, Vrec 4.3 6.7 10.0 16.6 20.0 26.6

HST-HCRTensile Load, Nrec 3.0 5.3 6.7 11.7 - -

Shear Load, Vrec 4.3 6.7 10.0 18.3 - -

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method and cracked concrete information, please refer to Fastening Technology Manual

Approvals

Anchoring Systems


M8 - M12

M16 - M 20

Special Request

HST programmeHST: stud head (galv to min. 5µm) Drill bit Tighten. Max. Clear- Width nom. Min. hole Anchorage Anchor Head torque fasten. ance across dia., do depth, h1 depth,hef length, I mark Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

12 95 70 215 N 60 120 14 19 25 HST M12x215/120 0037159012 95 70 235 P 60 140 14 19 25 HST M12x235/140 0037159112 95 70 255 R 60 160 14 19 25 HST M12x255/160 0037159216 115 82 140 I 110 25 18 24 12 HST M16x140/25 0037159316 115 82 165 J 110 50 18 24 12 HST M16x165/50 0037159416 115 82 215 N 110 100 18 24 12 HST M16x215/100 0037159516 115 82 255 R 110 140 18 24 12 HST M16x255/140 0037159616 115 82 295 S 110 180 18 24 12 HST M16x295/180 0037159720 140 101 170 K 240 30 22 30 5 HST M20x170/30 0037159820 140 101 200 M 240 60 22 30 5 HST M20x200/60 0037159920 140 101 260 R 240 120 22 30 5 HST M20x260/120 0027469724 170 125 200 M 300 30 26 36 5 HST M24x200/30 0037160124 170 125 230 P 300 60 26 36 5 HST M24x230/60 00371602

HST-R: stud head (A4 stainless steel)8 65 47 75 C 20 10 9 13 50 HST-R M8x75/10 004354478 65 47 95 E 20 30 9 13 50 HST-R M8x95/30 004354488 65 47 115 G 20 50 9 13 50 HST-R M8x115/50 0043544910 80 60 90 E 40 10 12 17 50 HST-R M10x90/10 0043545010 80 60 110 F 40 30 12 17 40 HST-R M10x110/30 0043545110 80 60 130 H 40 50 12 17 25 HST-R M10x130/50 00435452

10 80 60 160 J 40 80 12 17 25 HST-R M10x160/80 0043545312 95 70 115 G 60 20 14 19 25 HST-R M12x115/20 0043545412 95 70 145 I 60 50 14 19 25 HST-R M12x145/50 0043545512 95 70 185 L 60 90 14 19 25 HST-R M12x185/90 0043545612 95 70 215 N 60 120 14 19 25 HST-R M12x215/120 0043545716 115 82 140 I 110 25 18 24 12 HST-R M16x140/25 0037605116 115 82 165 J 110 50 18 24 12 HST-R M16x165/50 0037605216 115 82 215 N 110 100 18 24 12 HST-R M16x215/100 0037605316 115 82 255 R 110 140 18 24 12 HST-R M16x255/140 0037605416 115 82 295 S 110 180 18 24 12 HST-R M16x295/180 0037605520 140 101 170 K 240 30 22 30 5 HST-R M20x170/30 0037605620 140 101 200 M 240 60 22 30 5 HST-R M20x200/60 0037605724 170 125 200 M 300 30 26 36 5 HST-R M24x200/30 0037605824 170 125 230 P 300 60 26 36 5 HST-R M24x230/60 00376059

HST-HCR: stud head (HCR high corrosion material)

8 65 47 75 C 20 10 9 13 20 HST-HCR M8x75/10 003760608 65 47 95 E 20 30 9 13 20 HST-HCR M8x95/30 003760618 65 47 115 G 20 50 9 13 20 HST-HCR M8x115/50 0037606210 80 60 90 E 40 10 12 17 20 HST-HCR M10x90/10 0037606310 80 60 110 F 40 30 12 17 20 HST-HCR M10x110/30 0029536910 80 60 130 H 40 50 12 17 20 HST-HCR M10x130/50 0037606512 95 70 115 G 60 20 14 19 10 HST-HCR M12x115/20 0037606612 95 70 145 I 60 50 14 19 10 HST-HCR M12x145/50 0037606712 95 70 185 L 60 90 14 19 10 HST-HCR M12x185/90 0037606812 95 70 215 N 60 120 14 19 10 HST-HCR M12x215/120 0037606916 115 82 140 I 110 25 18 24 10 HST-HCR M16x140/25 0037607016 115 82 165 J 110 50 18 24 10 HST-HCR M16x165/50 0037607116 115 82 215 N 110 100 18 24 10 HST-HCR M16x215/100 0037607216 115 82 255 R 110 140 18 24 10 HST-HCR M16x255/140 0037607316 115 82 295 S 110 180 18 24 10 HST-HCR M16x295/180 00376074

Anchoring Systems


7Marking

hefh1

I

df

tfix

Tinstdo



HSA Tensile Load, Nrec 2.0 4.0 5.3 8.3 12.9 17.6

(standard embedment) Shear Load, Vrec 2.2 4.0 6.5 10.2 18.3 28.3

HSA-F Tensile Load, Nrec 2.0 4.0 5.3 8.3 11.6 16.7


HSA-R Tensile Load, Nrec 2.0 4.0 4.0 8.3 12.9 14.7



Special Request

Stud anchorHSA

AdvantagesTwo anchorage depth for optimize use and high efficiency. And two defined and marked embedment depths for ease in inspection

Due to the cold-forming technology manufacturing process, the anchor material remains ductile. The result is an anchor which allows alignment without breaking

Head mark with letter code for accurate identification when in place

HSA programmeHSA: stud head (galv. to min. 5µm) Drill bit Min. hole depth, Max. fasten thk. Tighten. Clear- Width nom. Anchor Head h1 tfix torque ance across dia., do length, I mark Standard Reduced Standard Reduced Tinst hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (pcs)

6 50 A - 45 - 5 5 7 10 200 HSA M6x50/-/5 002558306 65 C 55 45 10 20 5 7 10 200 HSA M6x65/10/20 002558316 85 D 55 45 30 40 5 7 10 100 HSA M6x85/30/40 002558326 100 E 55 45 45 55 5 7 10 100 HSA M6x100/45/55 002558338 57 B - 50 - 5 15 9 13 100 HSA M8x57/-/5 002558348 75 C 65 50 10 23 15 9 13 100 HSA M8x75/10/23 002558358 92 E 65 50 27 40 15 9 13 80 HSA M8x92/27/40 002953778 115 G 65 50 50 63 15 9 13 50 HSA M8x115/50/63 002558378 137 H 65 50 72 85 15 9 13 50 HSA M8x137/72/85 00255838

Approvals

ApplicationsFor fastening cladding works and facades, shopfronts and balustrades, window wall and steel worksFor fastening aluminum windows and LouvresFor fastening marble granite and architectural features

Base materialNon-cracked concrete

Material Steel, galvanized at least 5µm (M6-M20)

Hot dip galvanized at least 45µm (M6-M20)A4 stainless steel (M6-M20)

321 4


Blow out dust and fragments. Install anchor. Apply tightening torque.Drill hole with drill bit.

Anchoring Systems


HSA: stud head (galv. to min. 5µm) Drill bit Min. hole depth, Max. fasten thk. Tighten. Clear- Width nom. Anchor Head h1 tfix torque ance across dia., do length, I mark Standard Reduced Standard Reduced Tinst hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (pcs)

10 68 C - 60 - 5 30 12 17 50 HSA M10x68/-/5 0025583910 90 E 70 60 20 25 30 12 17 50 HSA M10x90/20/25 0025584010 108 F 70 60 37 45 30 12 17 40 HSA M10x108/37/45 0029535010 120 G 70 60 50 57 30 12 17 40 HSA M10x120/50/57 0029535210 140 I 70 60 70 77 30 12 17 25 HSA M10x140/70/77 0025584310 160 J 70 60 90 97 30 12 17 25 HSA M10x160/90/97 0038461410 180 L 70 60 110 117 30 12 17 25 HSA M10x180/110/117 0038461512 80 D - 70 - 5 50 14 19 25 HSA M12x80/-/5 0025584412 100 E 95 70 5 25 50 14 19 25 HSA M12x100/5/25 0025584512 120 G 95 70 25 45 50 14 19 25 HSA M12x120/25/45 0025584612 150 I 95 70 55 75 50 14 19 25 HSA M12x150/55/75 0025584712 180 L 95 70 85 105 50 14 19 25 HSA M12x180/85/105 0025584812 220 O 95 70 125 145 50 14 19 25 HSA M12x220/125/145 0025584912 240 P 95 70 145 165 50 14 19 25 HSA M12x240/145/165 0025585012 300 S 95 70 205 225 50 14 19 25 HSA M12x300/205/225 0025585116 100 E - 90 - 5 100 18 24 16 HSA M16x100/-/5 0025585216 120 G 115 90 5 25 100 18 24 16 HSA M16x120/5/25 0025585316 140 I 115 90 25 45 100 18 24 16 HSA M16x140/25/45 0025585416 190 L 115 90 75 95 100 18 24 16 HSA M16x190/75/95 0025585516 240 P 115 90 125 145 100 18 24 16 HSA M16x240/125/145 00255856

20 125 G - 105 - 10 200 22 30 10 HSA M20x125/-/10 0025585720 170 K 130 105 30 55 200 22 30 10 HSA M20x170/30/55 00255858

HSA-F: stud head (hot dip galv. to min. 45µm)6 50 A - 45 - 5 5 7 10 200 HSA-F M6x50/-/5 003382606 65 C 55 45 10 20 5 7 10 200 HSA-F M6x65/10/20 003371218 57 B - 50 - 5 15 9 13 100 HSA-F M8x57/-/5 003371228 75 C 65 50 10 23 15 9 13 100 HSA-F M8x75/10/23 003371238 92 E 65 50 27 40 15 9 13 80 HSA-F M8x92/27/40 002953718 137 H 65 50 72 85 15 9 13 50 HSA-F M8x137/72/85 0033712510 68 C - 60 - 5 30 12 17 50 HSA-F M10x68/-/5 0033712610 90 E 70 60 20 25 30 12 17 50 HSA-F M10x90/20/25 0033712710 108 F 70 60 37 45 30 12 17 40 HSA-F M10x108/37/45 0029535310 120 G 70 60 50 57 30 12 17 40 HSA-F M10x120/50/57 0029535412 80 D - 70 - 5 50 14 19 25 HSA-F M12x80/-/5 0033713012 100 E 95 70 5 25 50 14 19 25 HSA-F M12x100/5/25 0033713112 120 G 95 70 25 45 50 14 19 25 HSA-F M12x120/25/45 0033713212 150 I 95 70 55 75 50 14 19 25 HSA-F M12x150/55/75 0033713312 240 P 95 70 145 165 50 14 19 25 HSA-F M12x240/145/165 0033826116 100 E - 90 - 5 100 18 24 16 HSA-F M16x100/-/5 0033713416 140 I 115 90 25 45 100 18 24 16 HSA-F M16x140/25/45 0033713516 190 L 115 90 75 95 100 18 24 16 HSA-F M16x190/75/95 0033713620 125 G - 105 - 10 200 22 30 10 HAS-F M20x125/-/10 0027469620 170 K 130 105 30 55 200 22 30 10 HSA-F M20x170/30/55 00337137

HSA-R: stud head (A4 stainless steel)6 50 A - 45 - 5 5 7 10 200 HSA-R M6x50/-/5 003321836 65 C 55 45 10 20 5 7 10 200 HSA-R M6x65/10/20 003321846 85 D 55 45 30 40 5 7 10 100 HSA-R M6x85/30/40 003321858 57 B - 50 - 5 15 9 13 100 HSA-R M8x57/-/5 003321868 75 C 65 50 10 23 15 9 13 100 HSA-R M8x75/10/23 003321878 92 E 65 50 27 40 15 9 13 80 HSA-R M8x92/27/40 002953708 115 G 65 50 50 63 15 9 13 50 HSA-R M8x115/50/63 0033218910 68 C - 60 - 5 30 12 17 50 HSA-R M10x68/-/5 0033219010 90 E 70 60 20 25 30 12 17 50 HSA-R M10x90/20/25 0033219110 120 G 70 60 50 57 30 12 17 40 HSA-R M10x120/50/57 0029535512 80 D - 70 - 5 50 14 19 25 HSA-R M12x80/-/5 0033219312 100 E 95 70 5 25 50 14 19 25 HSA-R M12x100/5/25 0033219412 120 G 95 70 25 45 50 14 19 25 HSA-R M12x120/25/45 0033219516 100 E - 90 - 5 100 18 24 16 HSA-R M16x100/-/5 0033711616 140 I 115 90 25 45 100 18 24 16 HSA-R M16x140/25/45 0033711716 190 L 115 90 75 95 100 18 24 16 HSA-R M16x190/75/95 0033711820 125 G - 105 - 10 200 22 30 10 HSA-R M20x125/-/10 0033711920 170 K 130 105 30 55 200 22 30 10 HSA-R M20x170/30/55 00337120

Anchoring Systems


7

AdvantagesOptimized thread for quick, reliable drivingPressed-on washer for greater setting convenienceNeat head finish, no protruding threadSuitable for very small edge distance and spacingHigh working efficiency in ideal for serial applicationsRemovable

Special Request

Screw anchorHUS-H

HUS-H programmeHUS-H6: Hexagon head (galv. to min. 5 µm) Drill bit Min. hole depth, h0 Min. embed. depth, hnom Max. fastenable thickness, tfix Clear- Width nom. Anchor Extra Extra Extra ance across dia., do length, I Standard Reduced Reduced Standard Reduced Reduced Standard Reduced Reduced hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (pcs)

6 35 44 - - 34 - - 1 - - 9 13 100 HUS-H 6x35 002736556 45 44 - - 34 - - 11 - - 9 13 100 HUS-H 6x45 002736566 60 44 - - 34 - - 26 - - 9 13 100 HUS-H 6x60 002736596 80 44 - - 34 - - 46 - - 9 13 100 HUS-H 6x80 002736636 100 44 - - 34 - - 66 - - 9 13 100 HUS-H 6x100 002736666 120 44 - - 34 - - 86 - - 9 13 100 HUS-H 6x120 00273667

HUS-HR6: Hexagon head (A4 stainless steel)6 35 - 40 - - 30 - - 5 - 9 13 50 HUS-HR 6x35/5 002900056 45 - 40 - - 30 - - 15 - 9 13 50 HUS-HR 6x45/15 002900116 60 65 40 - 55 30 - 5 30 - 9 13 50 HUS-HR 6x60/5/30 002900146 70 65 40 - 55 30 - 15 40 - 9 13 50 HUS-HR 6x70/15/40 00290015

ApplicationsEasy and complete removal for temporary fixings, e.g. scaffoldingIdeal for large scale repetitive fastening, e.g. shelving system, hand rail

Base materialCracked or non-cracked concreteSolid brick, sand lime stone and antoclaved concrete

Material Carbon steel with galvanized to min 5µm

A4 stainless steel


ModelAnchor

Size6 8 10 14

HUS-H

Embedment 34 50 60 75 60 70 85 70 90 110

Tensile Load, Nrec

0.4 2.8 4.0 5.3 4.0 4.0 6.7 5.9 9.2 14.0

Shear Load, Vrec

0.7 5.3 5.3 5.3 7.9 7.9 7.9 11.9 17.1 17.1

ModelAnchor

Size6 8 10 14

HUS-HR

Embedment 55 50 60 80 60 70 90 70 110

Tensile Load, Nrec

3.0 3.0 4.0 5.3 4.0 5.3 8.3 6.3 13.4

Shear Load, Vrec

5.7 7.9 8.7 8.7 10.5 11.0 11.0 12.6 25.6

Remarks:1) All the data applies to no edge distance, spacing and other influences 2) For detail design method and cracked concrete information, please refer to Fastening Technology Manual3) For technical data in soild massonry and autoclaved aerated concrete, please refer to Fastening Technoloy Maunual

Approvals


Blow out dust and fragments. Drive in screw anchor with screwdriver if the base meterial is concrete.

Drill hole.

l

hefhnom

ho

df

tfix

Tinstdo

Anchoring Systems


HUS-H8: Hexagon head (galv. to min. 5 µm)

Drill bit Min. hole depth, h0 Min. embed. depth, hnom Max. fastenable thickness, tfix Clear- Width nom. Anchor Extra Extra Extra ance across dia., do length, I Standard Reduced Reduced Standard Reduced Reduced Standard Reduced Reduced hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (pcs)

8 55 - - 60 - - 50 - - 5 12 13 50 HUS-H 8x55/5 003687288 65 - 70 60 - 60 50 - 5 15 12 13 50 HUS-H 8x65/5/15 003687298 80 85 70 60 75 60 50 5 20 30 12 13 50 HUS-H 8x80/5/20/30 004014388 90 85 70 60 75 60 50 15 30 40 12 13 50 HUS-H 8x90/15/30/40 003687318 110 85 70 60 75 60 50 35 50 60 12 13 50 HUS-H 8x110/35/50/60 003687328 130 85 70 60 75 60 50 55 70 80 12 13 50 HUS-H 8x130/55/70/80 003687338 150 85 70 60 75 60 50 75 90 100 12 13 50 HUS-H 8x150/75/90/100 00368734

HUS-HR8: Hexagon head (A4 stainless steel)

8 55 - - 60 - - 50 - - 5 12 13 25 HUS-HR 8x55/5 002900298 65 - 70 60 - 60 50 - 5 15 12 13 25 HUS-HR 8x65/5/15 002900308 75 - 70 60 - 60 50 - 15 25 12 13 25 HUS-HR 8x75/15/25 002900318 85 90 70 60 80 60 50 5 25 35 12 13 25 HUS-HR 8x85/5/25/35 002900328 95 90 70 60 80 60 50 15 35 45 12 13 20 HUS-HR 8x95/15/35/45 00290033

8 105 90 70 60 80 60 50 25 45 55 12 13 20 HUS-HR 8x105/25/45/55 00290034

HUS-H10: Hexagon head (galv. to min. 5 µm)10 65 - - 70 - - 60 - - 5 14 15 50 HUS-H 10x65/5 0036873510 75 - 80 70 - 70 60 - 5 15 14 15 50 HUS-H 10x75/5/15 0036873610 90 95 80 70 85 70 60 5 20 30 14 15 50 HUS-H 10x90/5/20/30 0040143910 100 95 80 70 85 70 60 15 30 40 14 15 50 HUS-H 10x100/15/30/40 0036873810 120 95 80 70 85 70 60 35 50 60 14 15 50 HUS-H 10x120/35/50/60 0036873910 140 95 80 70 85 70 60 55 70 80 14 15 50 HUS-H 10x140/55/70/80 0036874010 160 95 80 70 85 70 60 75 90 100 14 15 50 HUS-H 10x160/75/90/100 0036874110 200 95 80 70 85 70 60 115 130 140 14 15 50 HUS-H 10x200/115/130/140 0036874210 240 95 80 70 85 70 60 155 170 180 14 15 50 HUS-H 10x240/155/170/180 0036874310 280 95 80 70 85 70 60 195 210 220 14 15 50 HUS-H 10x280/195/210/220 00368744

HUS-HR10: Hexagon head (A4 stainless steel) 10 65 - - 70 - - 60 - - 5 14 15 25 HUS-HR 10x65/5 0029006210 75 - 80 70 - 70 60 - 5 15 14 15 25 HUS-HR 10x75/5/15 0029006310 85 - 80 70 - 70 60 - 15 25 14 15 25 HUS-HR 10x85/15/25 0029006710 95 105 80 70 90 70 60 5 25 35 14 15 25 HUS-HR 10x95/5/25/35 0029006810 105 105 80 70 90 70 60 15 35 45 14 15 25 HUS-HR 10x105/15/35/45 0029007210 115 105 80 70 90 70 60 25 45 55 14 15 25 HUS-HR 10x115/25/45/55 0029013110 130 105 80 70 90 70 60 40 60 70 14 15 25 HUS-HR 10x130/40/60/70 00290161

HUS-H14: Hexagon head (galv. to min. 5 µm)14 80 - - 80 - - 70 - - 10 18 21 16 HUS-H 14x80/10 0036874514 115 120 100 80 110 90 70 5 25 45 18 21 16 HUS-H 14x115/5/25/45 0036874614 135 120 100 80 110 90 70 25 45 65 18 21 16 HUS-H 14x135/25/45/65 0036874714 160 120 100 80 110 90 70 50 70 90 18 21 16 HUS-H 14x160/50/70/90 00368748

HUS-HR14: Hexagon head (A4 stainless steel)14 80 - 80 - - 70 - - 10 - 18 21 12 HUS-HR 14x80/10 0029018114 120 120 80 - 110 70 - 10 50 - 18 21 12 HUS-HR 14x120/10/50 0029018214 135 120 80 - 110 70 - 25 65 - 18 21 12 HUS-HR 14x135/25/65 00290183

Special Request

SIW 22T-A Cordless high torque impact wrench and impact socketsDescription Length (mm) Package (pcs) Order designation Item no.

SIW 22T-A lithium cordless impact wrench (without battery & charger) - 1 SIW 22T-A 00409459 C4/36 Li charger 230V (lithium-ion) - 1 C4/36 00272937 B22 battery (2.6 Ah lithium-ion) - 1 B22/2.6 00360383 Impact socket S-NSD 1/2” - 13mm, short (For HUS-H(R) 6 & 8) 38 1 S-NSD 1/2”-13 S 00408402 Impact socket S-NSD 1/2” - 15mm, short (For HUS-H(R) 10) 38 1 S-NSD 1/2”-15 S � 00408403 Impact socket S-NSD 1/2” - 21mm, short (For HUS-H(R) 14) 38 1 S-NSD 1/2”-21 S 00408408 S-NSD ½" 5" impact socket extension - 1 S-NSD 1/2” 5” � 00385942 S-NSD ½" 10" impact socket extension - 1 S-NSD 1/2” 10” � 00386058

� � �

FLEET MANAGEMENT

Anchoring Systems


7

AdvantagesNew metal ribs improved sleeve rigidityOptimum dust resistance thanks to closed sleeveSetting depth check markEasily removableOutstanding screw quality (8.8 grade steel) (For HLC-H, HLC-L, HLC-SK, HLC-T)Fire resistance tested

Special Request

Sleeve anchorHLC

lHLC-SK

hefh1

df

tfix

Tinst

do

HLC, HLC-H, HLC-EC / EO, HLC-T, HLC-Ll

hefh1

df

Ic

tfix

Tinst

do

do

Sw

d

Applications For fastening medium to small weight equipment For fastening kitchen cabinet and sanitary equipment Ideal for temporary fastenings such as forming braces and jacks

Base material Concrete Solid brick, sand lime stone and hollow brick

Material A2 stainless steel Galvanized at least 5 µm (M5-M16)



HLC, HLC-H, HLC-EC / EO,

Tensile Load, Nrec 1.0 1.5 2.0 3.0 4.0

HLC-L, HLC-SK, HLC-T Shear Load, Vrec 1.8 3.2 5.2 6.3 7.5


Approvals

HLC programmeHLC: stud head (galv. to min 5µm) Drill bit Anchorage Anchor Anchor length, Tighten. Max. Clear- Width nom. Min. hole depth, length, under washer, Thread torque fasten. ance across dia., do depth, h1 hef I Ic dia., d (concrete), Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

6.5 / " 30 16 30 25 M5 5 5 7 8 100 HLC 6.5x25/5 (M5) 003858116.5 / " 30 16 45 40 M5 5 20 7 8 100 HLC 6.5x40/20 (M5) 003858126.5 / " 30 16 65 65 M5 5 40 7 8 100 HLC 6.5x60/40 (M5) 00385813

8 40 26 46 40 M6 8 10 9 10 100 HLC 8x40/10 (M6) 003858148 40 26 61 55 M6 8 25 9 10 100 HLC 8x55/25 (M6) 003858168 40 26 76 70 M6 8 40 9 10 100 HLC 8x70/40 (M6) 003858178 40 26 91 85 M6 8 55 9 10 100 HLC 8x85/55 (M6) 0038581810 50 31 48 40 M8 25 5 11 13 50 HLC 10x40/5 (M8) 0038581910 50 31 58 50 M8 25 15 11 13 50 HLC 10x50/15 (M8) 0038582010 50 31 68 60 M8 25 25 11 13 50 HLC 10x60/25 (M8) 0038582210 50 31 88 80 M8 25 45 11 13 50 HLC 10x80/45 (M8) 0038582310 50 31 108 100 M8 25 65 11 13 50 HLC 10x100/65 (M8) 0038582412 65 33 65 55 M10 40 15 13 16 50 HLC 12x55/15 (M10) 0038582512 65 33 85 75 M10 40 35 13 16 50 HLC 12x75/35 (M10) 0038582712 65 33 110 100 M10 40 60 13 16 25 HLC 12x100/60 (M10) 00385829

141414


Drill hole with drill bit. Blow out dust and fragments.

Install the anchor. Apply torque.

Anchoring Systems


HLC: stud head (galv. to min 5µm) Drill bit Anchorage Anchor Anchor length, Tighten. Max. Clear- Width nom. Min. hole depth, length, under washer, Thread torque fasten. ance across dia., do depth, h1 hef I Ic dia., d (concrete), Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

16 75 41 72 60 M12 50 10 17 19 25 HLC 16x60/10 (M12) 0038583016 75 41 112 100 M12 50 50 17 19 10 HLC 16x100/50 (M12) 0038583116 75 41 152 140 M12 50 90 17 19 10 HLC 16x140/90 (M12) 0038583220 85 41 95 80 M16 80 25 21 24 10 HLC 20x80/25 (M16)* 0038583320 85 41 130 115 M16 80 60 21 24 10 HLC 20x115/60 (M16)* 0038583420 85 41 165 150 M16 80 95 21 24 10 HLC 20x150/95 (M16)* 00385835

* Old sleeve design

HLC-H: bolt version (galv. to min 5µm)

Drill bit Anchorage Anchor Anchor length, Tighten. Max. Clear- Width nom. Min. hole depth, length, under washer, Thread torque fasten. ance across dia., do depth, h1 hef I Ic dia., d (concrete), Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

8 40 26 46 40 M6 8 10 9 10 100 HLC-H 8x40/10 003858368 40 26 61 55 M6 8 25 9 10 100 HLC-H 8x55/25 003858388 40 26 76 70 M6 8 40 9 10 100 HLC-H 8x70/40 0038584010 50 31 48 40 M8 25 5 11 13 50 HLC-H 10x40/5 0038584110 50 31 68 60 M8 25 25 11 13 50 HLC-H 10x60/25 0038584210 50 31 88 80 M8 25 45 11 13 50 HLC-H 10x80/45 0038584510 50 31 108 100 M8 25 65 11 13 50 HLC-H 10x100/65 0038584712 65 33 65 55 M10 40 15 13 17 50 HLC-H 12x55/15 0038584812 65 33 85 75 M10 40 35 13 17 50 HLC-H 12x75/35 0038584912 65 33 110 100 M10 40 65 13 17 25 HLC-H 12x100/65 0038585216 75 41 72 60 M12 50 10 17 19 10 HLC-H 16x60/10 0038585316 75 41 112 100 M12 50 50 17 19 15 HLC-H 16x100/50 0038585416 75 41 152 140 M12 50 90 17 19 10 HLC-H 16x140/90 00385855

HLC-H: bolt version (galv. to min 5µm) - Bucket Version

8 40 26 61 55 M6 8 25 9 10 500 HLC-H 8x55/25 Bucket 0038583910 50 31 68 60 M8 25 25 11 13 300 HLC-H 10x60/25 Bucket 0038584410 50 31 88 80 M8 25 45 11 13 200 HLC-H 10x80/45 Bucket 0038584612 65 33 85 75 M10 40 35 13 17 150 HLC-H 12x75/35 Bucket 00385851

HLC: stud head (galv. to min 5µm) - Bucket Version

8 40 26 46 40 M6 8 10 9 10 500 HLC 8x40/10 (M6) Bucket 0038581510 50 31 58 50 M8 25 15 11 13 400 HLC 10x50/15 (M8) Bucket 0038582112 65 33 65 55 M10 40 15 13 16 250 HLC 12x55/15 (M10) Bucket 0038582612 65 33 85 75 M10 40 35 13 16 200 HLC 12x75/35 (M10) Bucket 00385828

HLC-SK: countersunk head (galv. to min 5µm) Drill bit Anchorage Anchor Anchor length, Tighten. Max. Clear- Width nom. Min. hole depth, length, under washer, Thread torque fasten. ance across dia., do depth, h1 hef I Ic dia., d (concrete), Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

6.5 / " 30 16 45 - M5 5 20 7 - 100 HLC-SK 6.5x45/20 003858566.5 / " 30 16 65 - M5 5 40 7 - 100 HLC-SK 6.5x65/40 003858576.5 / " 30 16 85 - M5 5 60 7 - 100 HLC-SK 6.5x85/60 00385858

8 40 26 60 - M6 8 25 9 - 100 HLC-SK 8x60/25 003858598 40 26 75 - M6 8 40 9 - 100 HLC-SK 8x75/40 003858608 40 26 90 - M6 8 55 9 - 100 HLC-SK 8x90/55 0038586110 50 31 45 - M8 25 5 11 - 50 HLC-SK 10x45/5 0038586210 50 31 85 - M8 25 45 11 - 50 HLC-SK 10x85/45 0038586310 50 31 105 - M8 25 65 11 - 50 HLC-SK 10x105/65 0038586410 50 31 130 - M8 25 95 11 - 25 HLC-SK 10x130/95 0038586512 65 33 80 - M10 40 35 13 - 50 HLC-SK 12x80/35 00385866

HLC-EC: closed eyebolt (galv. to min 5µm)8 40 26 70 40 - 8 - 9 - 50 HLC-EC 8x40 0038587110 50 31 80 50 - 25 - 11 - 50 HLC-EC 10x50 0038587216 75 41 160 100 - 50 - 17 - 10 HLC-EC 16x100 0038587316 75 41 200 140 - 50 - 17 - 15 HLC-EC 16x160 00385874

141414

Anchoring Systems


7

Special Request

HLC-EO: open eyebolt (galv. to min 5µm)

Drill bit Anchorage Anchor Anchor length, Tighten. Max. Clear- Width nom. Min. hole depth, length, under washer, Thread torque fasten. ance across dia., do depth, h1 hef I Ic dia., d (concrete), Tinst thk. tfix hole, df flats, Sw Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

8 40 26 70 40 - 8 - 9 - 50 HLC-EO 8x40 00385875

HLC-R: stud head (A2 stainless steel)8 40 28 47 - M6 8 12 9 10 100 HLC-R 8x40/12 (M6) 0340321810 60 32 70 - M8 25 28 11 13 100 HLC-R 10x60/28 (M8) 0340321912 60 38 70 - M10 40 22 13 15 100 HLC-R 12x60/22 (M10) 0340322012 75 38 85 - M10 40 37 13 15 50 HLC-R 12x75/37 (M10) 0340322116 65 48 79 - M12 50 17 17 19 50 HLC-R 16x65/17 (M12) 03445621

HLC-L: rounded head (galv. to min 5µm)10 50 31 58 50 M8 25 15 11 13 50 HLC-L 10x50/15 0038586710 50 31 68 60 M8 25 25 11 13 50 HLC-L 10x60/25 0038586810 50 31 88 80 M8 25 45 11 13 50 HLC-L 10x80/45 0038586910 50 31 108 100 M8 25 65 11 13 50 HLC-L 10x100/65 00385870

HLC-T: eyelet head (galv. to min 5µm)6.5 / " 30 16 - 25 - 5 - 7 - 50 HLC-T 6.5x25 003858771

4

Anchoring Systems


hef

h1

df

Is

tfix

do

Push-in anchorHKD

AdvantagesFlexible choice for customer to select the anchor with flare (HKD / HKD-SR) and without flare (HKD-ER)

Setting independent of hole depth, better for standardization on accesories, hexagon bolt (HKD / HKD-SR)

Ease of workmanship control by means of visual checking (HKD / HKD-SR)

Easy setting at greater depth (HKD-ER)

VdS

Approvals

Applications For medium load range; fastening with bolts and threaded rods for plumbing,

heating, air duct and ventilation installation. For securing channels, rails, plates, bracket and suspension ceiling

Base material non-cracked concrete Hard natural stone

Material Bright galvanized steel to min 5µm (M6-M20 / 1/4"-3/4") Sherardized steel to min 45µm (M8-M16) A4 stainless steel (M6-M20)


Model Anchor sizeM6x25/1/4"x25

M8x30/5/16"x30

M10x40/3/8"x40

M12x50/1/2"x50

M16x65/5/8"x65

M20x80

HKDTensile Load, Nrec 2.1 2.8 4.3 5.9 8.8 12.0

Shear Load, Vrec 1.7 2.9 3.7 6.1 11.3 16.3

HKD-SR/


HKD-ER Shear Load, Vrec 2.1 2.8 3.5 6.2 10.7 17.0


Special Request


Blow out dust and fragments.

Install the anchor. Push in until marking is visible.Drill hole.

HKD programmeHKD: internal thread (galv. to min. 5µm) Drill bit Anchorage Anchor Tighten. Screw Clear- nom. Min. hole depth, length, Thread torque depth,. ance dia., do depth,h1 hef I dia. Tinst Is (min/max) hole, df Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

8 27 25 25 M6 4 8 / 11 7 100 HKD M6x25 0037689410 33 30 30 M8 8 10 / 13 9 100 HKD M8x30 0037695912 43 40 40 M10 15 12 / 16 12 50 HKD M10x40 0037696715 54 50 50 M12 35 14 / 22 14 50 HKD M12x50 0037854420 70 65 65 M16 60 18 / 28 18 25 HKD M16x65 0038294125 85 80 80 M20 120 23 / 34 22 25 HKD M20x80 003829558 27 25 25 1/4" 4 8 / 11 7 100 HKD 1/4"x25 0038298010 33 30 30 5/16" 8 10 / 13 9 100 HKD 5/16"x30 00383679

12 43 40 40 3/8" 15 12 / 16 12 100 HKD 3/8"x40 0038396016 54 50 50 1/2" 35 14 / 22 14 50 HKD 1/2"x50 0038402120 70 65 65 5/8" 60 18 / 28 18 25 HKD 5/8"x65 00384023

Anchoring Systems


7

Special Request

HKD-SAC: internal thread (galv. to min. 45µm) Drill bit Anchorage Anchor Tighten. Screw Clear- nom. Min. hole depth, length, Thread torque depth,. ance dia., do depth,h1 hef I dia. Tinst Is (min/max) hole, df Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

10 33 30 30 M8 8 10 / 13 9 100 HKD-SAC M8x30 0033622712 43 40 40 M10 15 12 / 16 12 50 HKD-SAC M10x40 0033623015 54 50 50 M12 35 14 / 22 14 50 HKD-SAC M12x50 0033623120 70 65 65 M16 60 18 / 28 18 25 HKD-SAC M16x65 00352394

HKD-SR: internal thread (A4 stainless steel)8 27 25 25 M6 4 8 / 11 7 100 HKD-SR M6x25 0024795110 33 30 30 M8 8 10 / 13 9 100 HKD-SR M8x30 0024795212 43 40 40 M10 15 12 / 16 12 50 HKD-SR M10x40 0024795315 54 50 50 M12 35 14 / 22 14 50 HKD-SR M12x50 0024795420 70 65 65 M16 60 18 / 28 18 25 HKD-SR M16x65 0024795525 85 80 80 M20 120 23 / 34 22 25 HKD-SR M20x80 00247956

HKD-ER: internal thread (A4 stainless steel)

10 33 30 30 M8 8 10 / 13 9 100 HKD-ER M8x30 0035229312 43 40 40 M10 15 12 / 16 12 50 HKD-ER M10x40 0035229415 54 50 50 M12 35 14 / 22 14 50 HKD-ER M12x50 0032454820 70 65 65 M16 60 18 / 28 18 25 HKD-ER M16x65 0035229510 33 30 30 5/16" 8 10 / 28 9 100 HKD-ER 5/16"x30 0027264112 43 40 40 3/8" 15 12 / 16 12 100 HKD-ER 3/8"x40 0027147016 54 50 50 1/2" 35 14 / 22 14 50 HKD-ER 1/2"x50 00379642

Required tools

Anchor Manual setting tool Package Mechanical setting tool Package Anchor description Order designation (pcs) Item no. Order designation (pcs) Item no.

HKD-S / -E M6 / 1/4"x25 HSD-G M6 1/4"x25 1 00243738 HSD-M M6 1/4"x25 1 00243746HKD-S / -E M8 / 5/16"x30 HSD-G M8 5/16"x30 1 00243740 HSD-M M8 5/16"x30 1 00243748

HKD-S / -E M10 / 3/8"x40 HSD-G M10 3/8"x40 1 00243742 HSD-M M10 3/8"x40 1 00243751 HKD-S / -E M12 / 1/2"x50 HSD-G M12 1/2"x50 1 00243743 HSD-M M12 1/2"x50 1 00243752 HKD-S / -E M16 / 5/8"x65 HSD-G M16 5/8"x65 1 00243744 HSD-M M16 5/8"x65 1 00243753 HKD-S / -E M20 / 3/4"x80 HSD-G M20 3/4"x80 1 00243745 HSD-M M20 3/4"x80 1 00243754

Anchoring Systems


hefh1

df

tfix

do

Is

Special Request

Push-in anchorHKV

AdvantagesCost effective in M&E tradeNo collar-can be set at greater depthEasy to install-only a few hammer blows required for anchor expansionVisual check for correct setting

Approvals

Applications For medium load range; fastening with bolts and threaded rods for plumbing

heating, air duct and ventilation installation. For securing channels, rails, plates, bracket and suspension ceiling

Base material Non-cracked concrete

Material Galvanized steel to min 5µm (M6-M16 / 1/4"-1/2") A2 stainless steel (M6-M12/1/4"-1/2")


Model SizeM6x25/1/4"x25

M8x30/5/16"x30

M10x30/3/8"x30

M10x40/3/8"x40

M12x50/1/2"x50

M16x65

HKV / Tensile Load, Nrec 1.4 2.0 2.0 3.0 4.2 8.8HKV-R2 Shear Load, Vrec 1.7 2.9 3.3 3.7 6.1 11.3



Blow out dust and fragments. Install the anchor. Push in until marking is visible.Drill hole.

HKV programmeHKV: internal thread (galv. to min. 5µm) Drill bit Tighten. Clear- nom. Min. hole Anchorage Anchor Thread torque Screw ance dia., do depth,h1 depth, hef length, I size Tinst depth, hole, df Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (Nm) (mm) (mm) (pcs)

8 27 25 25 M6 4 12 7 1000 HKV M6x25 Bucket 0038461710 33 30 30 M8 8 14 9 500 HKV M8x30 Bucket 0038496712 33 30 30 M10 15 13 12 500 HKV M10x30 Bucket (short ver.) -

12 43 40 40 M10 15 18 12 500 HKV M10x40 Bucket 0038497015 54 50 50 M12 35 22 14 250 HKV M12x50 Bucket 00384972

20 70 65 65 M16 60 30 18 150 HKV M16x65 Bucket 003849738 27 25 25 1/4" 4 12 7 1000 HKV 1/4"x25 Bucket 00384976

10 33 30 30 5/16" 8 14 9 500 HKV 5/16"x30 Bucket 0038497812 33 30 30 3/8" 15 13 12 500 HKV 3/8"x30 Bucket (short ver.) 00384980

12 43 40 40 3/8" 15 18 12 500 HKV 3/8"x40 Bucket 00385455 16 54 50 50 1/2" 35 22 14 250 HKV 1/2"x50 Bucket 00385457

HKV-R2: internal thread (A2 stainless steel)

8 27 25 25 M6 4 12 7 100 HKV-R2 M6x25 0042366410 33 30 30 M8 8 14 9 100 HKV-R2 M8x30 00423665 12 43 40 40 M10 15 18 12 50 HKV-R2 M10x40 0042366615 54 50 50 M12 35 22 14 50 HKV-R2 M12x50 004236688 27 25 25 1/4" 4 12 7 100 HKV-R2 1/4"x25 0042366910 33 30 30 5/16" 8 14 9 100 HKV-R2 5/16"x30 00423670 12 43 40 40 3/8" 15 18 12 50 HKV-R2 3/8"x40 0042367116 54 50 50 1/2" 35 22 14 50 HKV-R2 1/2"x50 00423672

Anchoring Systems


7

Required tools

Anchor Manual setting tool Package Mechanical setting tool Package Anchor description Order designation (pcs) Item no. Order designation (pcs) Item no.

HKV M6x25 / 1/4" x 25 HSD-G M6 1/4"x25 1 00243738 HSD-M M6 1/4"x25 1 00243746HKV M8x30 / 5/16" x 30 HSD-G M8 5/16"x30 1 00243740 HSD-M M8 5/16"x30 1 00243748HKV M10x30 / 3/8" x 30 HSD-G M10 3/8"x30 1 00230935 HSD-M M10 3/8"x30 1 00243750HKV M10x40 / 3/8" x 40 HSD-G M10 3/8"x40 1 00243742 HSD-M M10 3/8"x40 1 00243751

HKV M12x50 / 1/2" x 50 HSD-G M12 1/2"x50 1 00243743 HSD-M M12 1/2"x50 1 00243752

Special Request

Anchoring Systems


Model Size 6x50 8x60 10x70

HUD-L Tensile Load, Nrec 0.23 0.28 1.80at concrete 20 N/mm2

Shear Load, Vrec 0.23 0.28 1.80

HUD-L Tensile Load, Nrec 0.05 0.11 0.40at AAC block2)


Remarks:1) All the data applies to no edge distance, spacing and other influences 2) All the data applies to woodscrew3) For detail design method, please refer to Fastening Technology Manual

HUD programmeHUD-1 universal anchor Drill bit Anchor nom. Min. hole length, Woodscrew Screw

dia., do depth,h I dia. length Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (pcs)

5 35 25 3.5 - 4 I + tfix+5mm 500 HUD-1 5x25 00331615 6 40 30 4.5 - 5 I + tfix +5mm 500 HUD-1 6x30 00331616 8 55 40 5 - 6 I + tfix +5mm 400 HUD-1 8x40 00331617 10 65 50 7 - 8 I + tfix +5mm 200 HUD-1 10x50 00331618 12 80 60 8 - 10 I + tfix +5mm 100 HUD-1 12x60 00331619 14 90 70 10 - 12 I + tfix +5mm 50 HUD-1 14x70 00331620

HUD-L universal anchor (extra long)

6 70 50 4.5 - 5 I + tfix +5mm 400 HUD-L 6x50 00315938 8 80 60 5 - 6 I + tfix +5mm 200 HUD-L 8x60 00315939 10 90 70 7 - 8 I + tfix +5mm 100 HUD-L 10x70 00315940

Universal anchorHUD

Approvals

AdvantagesSuitable for all kinds of base material

High strength of material compared to traditional plastic anchor

Integrated plastic wings prevent from spinning inside the hole

Low screw driving torque required permits rapid setting

Applications Many fastenings using commercially available woodscrews

Base material Concrete Brick, sand-lime brick, hollow brick and gas concret

Material High-quality polyamide PA 6 (cadmium free)

Technical dataRecommended load (kN), safety factor(�)=5

Model Size 5x25 6x30 8x40 10x50 12x60 14x70

HUD-1 Tensile Load, Nrec 0.30 0.55 0.85 1.40 2.00 3.00at concrete 20 N/mm2

Shear Load, Vrec 0.40 0.90 1.25 2.20 3.00 5.60

HUD-1 Tensile Load, Nrec 0.10 0.15 0.30 0.40 0.50 0.60

at AAC blockShear Load, Vrec 0.13 0.18 0.30 - - -

5mm + l

lh1

tfix

do


Drill hole with drill bit. Install anchor. Drive screw into anchor.

Drill hole with drill bit. Install anchor. Drive screw into anchor.

Anchoring Systems


7

l

hnom

h1

T40

tfix

do

Special Request

Door frame anchorHRD-U


High holding power, thus fewer fastenings, less installation work and lower cost

Higher bending strength

Applications For fastening door and window frames Cladding / facade insulation material installation For primarily to secure cladding, timber and plastic frames to concrete, solid

and hollow brick

Base material Concrete Brick, sand-lime brick, hollow brick and gas concrete

Material High-quality polyamide PA 6 (cadmium free) Screw made of galvanized steel of grade 6.8 or A4-70 stainless steel

Technical data Recommended load (kN), safety factor(�)=3

Model Size 10x80/10

10x100/10

10x120/50

10x140/70

HRD-U at concrete Tensile Load, Nrec 1.6 1.6 1.6 1.615 N/mm2


HRD-U at AAC blockTensile Load, Nrec 0.5 0.5 0.5 0.5


Remarks:1) All the data applies to no edge distance, spacing and other influences 2) Holes must be produced by rotary drilling only3) For detail design method, please refer to Fastening Technology Manual

Approvals

Install anchor. Drive screw into anchor.Drill hole and drill bit.



Install the anchor.Drill hole with drill bit. Drive screw into anchor.

HRD-U programmeHRD-UGT: T40 head screw, steel 6.8 grade galvanized to 5µm Tighten. Drill bit Min. torque nom. Min. hole anchorage Anchor (Solid / Hollow brick) Max fasten. dia., do depth,h1 depth, hnom length, I Tinst thk.tfix Package Order designation Item no. (mm) (mm) (mm) (Nm) (mm) (pcs)

10 80 70 80 18/5 10 50 HRD-UGT 10x80/10 00257272 10 80 70 100 18/5 30 50 HRD-UGT 10x100/30 00257273 10 80 70 120 18/5 50 50 HRD-UGT 10x120/50 00257274 10 80 70 140 18/5 70 50 HRD-UGT 10x140/70 00257275

Order designation Package (pcs) Item no.

S-BH-50M bit holder, overall length 50 mm 1 00257257S-BXI 40 bit 10 00258132

Anchoring Systems


Door frame anchorHRD-C

HRD-C programmeHRD-C: T40 head screw, steel 6.8 grade galvanized to 5µm

Drill bit Min. Min. Max fasten. nom. Min. hole Min. hole anchorage anchorage Anchor thk.tfix dia., do depth,h1,1 depth,h1,2 depth, hnom,1 depth, hnom, 2 length, I (mm) Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) hef 50mm hef 70mm (pcs)

10 60 80 50 70 80 30 10 50 HRD-C 10x80 00423860 10 60 80 50 70 100 50 30 50 HRD-C 10x100 00423861 10 60 80 50 70 120 70 50 50 HRD-C 10x120 00423862 10 60 80 50 70 140 90 70 50 HRD-C 10x140 00423863 10 60 80 50 70 160 110 90 50 HRD-C 10x160 00423864 10 60 80 50 70 180 130 110 50 HRD-C 10x180 00423865 10 60 80 50 70 200 150 130 50 HRD-C 10x200 00423866 10 60 80 50 70 230 180 160 50 HRD-C 10x230 00423867 10 60 80 50 70 270 220 200 50 HRD-C 10x270 00423868 10 60 80 50 70 310 260 240 50 HRD-C 10x310 00423869

HRD-CR: T40 head screw, A4 stainess steel 10 60 80 50 70 60 10 - 50 HRD-CR 10x60 00423885 10 60 80 50 70 100 50 30 50 HRD-CR 10x100 00423886 10 60 80 50 70 140 90 70 50 HRD-CR 10x140 00423887


High holding power, thus fewer fastenings, less installation work and lower cost

Flexible embedment depth (approved at 50 mm and 70 mm)

Applications For fastening door and window frames Cladding / facade insulation material installation For primarily to secure cladding, timber and plastic frames to concrete, solid

and hollow brick


Material High-quality polyamide Screw made of galvanized steel of grade 6.8 or A4-70 stainless steel


Model Size 10x80 10x100 10x120 10x140

HRD-C (hef=70 mm) Tensile Load, Nrec 2.0 2.0 2.0 2.0at concrete 15 N/mm2


HRD-C light AAC block2)Tensile Load, Nrec 1.0 1.0 1.0 1.0



Install anchor. Drive screw into anchor.Drill hole and drill bit.



Install the anchor.Drill hole with drill bit. Drive screw into anchor.

hnom, ttolh1,1

hmi

hnom, ttol

tfixh1,2

hmitfix

Anchoring Systems


7

hnom

h1

tfix

do

l

HT programme Tighten. Drill bit Min. torque nom. Min. hole anchorage Anchor (Solid / Hollow brick) Max fasten. dia., do depth, h1 depth, hnom length, I Tinst thk.tfix Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (mm) (pcs)

10 50 30 72 8 / 4 tfix < l - hnom 100 HT 10x72 00369263 10 50 30 92 8 / 4 tfix < l - hnom 100 HT 10x92 00369264 10 50 30 112 8 / 4 tfix < l - hnom 100 HT 10x112 00369265 10 50 30 132 8 / 4 tfix < l - hnom 100 HT 10x132 00369266 10 50 30 152 8 / 4 tfix < l - hnom 100 HT 10x152 00369267 10 50 30 182 8 / 4 tfix < l - hnom 100 HT 10x182 00369268 10 50 30 202 8 / 4 tfix < l - hnom 100 HT 10x202 00369269

Special Request

Door frame anchorHT



Expansion cone cannot be lost

Good anchor for maintaining gaps to the base material

Applications For fastening door and window frames


Material Galvanized steel of grade 4.8

Anchoring Systems


Impact anchorHPS-1


Expanding head opens in hollow base material for providing reliable keying effect

Can be set with hammer or screwdriver for quick and easy installation

Removable

ApplicationsFor fastening pipes and cables, wood battens and components for electrical fitting

An anchor for solid and hollow base material for rapid installation without using a screwdriver


Material High-quality polyamide PA 6.6 (cadmium free) Screw made of galvanized steel to min 5µm or A2 stainless steel


Model Size 4/10 5/105/5-5/15

6/10-6/25

6/30-6/40

8/108/10-8/40

8/60-8/100

HPS-1 at concrete 30 N/mm2

Tensile Load, Nrec

0.05 0.10 0.15 0.25 0.25 0.30 0.40 0.40

Shear Load, Vrec

0.15 0.30 0.35 0.55 0.35 0.50 0.90 0.50

HPS-1 at AAC block2)

Tensile Load, Nrec

- - 0.08 0.10 0.10 - 0.15 0.15

Shear Load, Vrec

- - 0.10 0.12 0.10 - 0.30 0.20



HPS-1 programmeHPS-1: galv. to 5µm Drill bit nom. Min. hole Anchor Head fasten. dia., do depth, h1 length, I dia, dn thk. tfix Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (pcs)

4 25 21.5 7.0 2 250 HPS-1 4/0x20 00260369 5 25 22.0 7.5 2 250 HPS-1 5/0x20 00260395 5 30 27.0 9.5 5 200 HPS-1 5/5x25 00260347 5 30 32.0 9.5 10 200 HPS-1 5/10x30 00230515 5 30 37.0 9.5 15 200 HPS-1 5/15x35 00260348 6 40 27.0 11.0 2 150 HPS-1 6/0x25 00238159 6 40 32.0 11.0 5 150 HPS-1 6/5x30 00260349 6 40 37.0 11.0 10 150 HPS-1 6/10x35 00230516 6 40 42.0 11.0 15 150 HPS-1 6/15x40 00260350 6 40 52.0 11.0 25 100 HPS-1 6/25x50 00260351 6 40 57.0 11.0 30 100 HPS-1 6/30x55 00230517 6 40 67.0 11.0 40 100 HPS-1 6/40x65 00260352

l

hnom

h1

dn

tfix

do

Anchoring Systems


7

Special Request

HPS-1: galv. to 5µm Drill bit nom. Min. hole Anchor Head fasten. dia., do depth,h1 length, I dia, dn thk. tfix Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (pcs)

8 50 28.5 13.0 2 100 HPS-1 8/0x25 002381608 50 42.5 13.0 10 100 HPS-1 8/10x40 002603538 50 52.5 13.0 20 50 HPS-1 8/20x50 002305188 50 62.5 13.0 30 50 HPS-1 8/30x60 002603548 50 72.5 13.0 40 50 HPS-1 8/40x70 002305198 50 92.5 13.0 60 50 HPS-1 8/60x90 002603558 50 112.5 13.0 80 50 HPS-1 8/80x110 002603568 50 132.5 13.0 100 100 HPS-1 8/100x130 00260367

HPS-1: A2 stainless steel

5 30 27.0 9.5 5 200 HPS-1R 5/5x25 002603575 30 32.0 9.5 10 200 HPS-1R 5/10x30 002305245 30 37.0 9.5 15 200 HPS-1R 5/15x35 002603586 40 27.0 11.0 2 150 HPS-1R 6/0x25 002381616 40 32.0 11.0 5 150 HPS-1R 6/5x30 002603596 40 37.0 11.0 10 150 HPS-1R 6/10x35 002305256 40 42.0 11.0 15 100 HPS-1R 6/15x40 002603606 40 52.0 11.0 25 100 HPS-1R 6/25x50 002603616 40 67.0 11.0 40 100 HPS-1R 6/40x65 002603628 50 42.5 13.0 10 100 HPS-1R 8/10x40 002603638 50 62.5 13.0 30 50 HPS-1R 8/30x60 002603648 50 92.5 13.0 60 50 HPS-1R 8/60x90 002603658 50 112.5 13.0 80 50 HPS-1R 8/80x110 00260366

Anchoring Systems



Model SizeM4/

12x38M4/

19x45M5/

12x52M5/

25x65M6/

12x52M6/

24x65M8/

12x54M8/

24x66

Drywall panel 10 mmTensile Load, Nrec 0.20 - 0.20 - 0.20 - 0.20 -

Shear Load, Vrec 0.50 - 0.50 - 0.50 - 0.50 -

Drywall panel12.5 mm Tensile Load, Nrec 0.20 - 0.20 - 0.20 - 0.20 -

Shear Load, Vrec 0.50 - 0.50 - 0.50 - 0.50 -

Drywall panel Tensile Load, Nrec - - - 0.40 - 0.30 - 0.402x12.5 mm Shear Load, Vrec - - - 1.00 - 0.90 - 1.00

Gypsum fibreboard Tensile Load, Nrec 0.20 - 0.30 - 0.25 - 0.40 -10 mm Shear Load, Vrec 0.50 - 0.60 - 0.80 - 0.90 -

Gypsum fibreboard Tensile Load, Nrec 0.30 - 0.50 - 0.30 - 0.60 -12.5 mm Shear Load, Vrec 0.60 - 1.00 - 1.00 - 1.20 -

Gypsum fibreboard Tensile Load, Nrec - - - 0.90 - 0.80 - 1.702x12.5 mm Shear Load, Vrec - - - 1.10 - 1.80 - 1.70

Hollow brick 20 mmTensile Load, Nrec - 0.10 - - - - - -

Shear Load, Vrec - 0.30 - - - - - -


Cavity anchorHHD-S

AdvantagesPre-fitted screws

Quick and trouble free installation

Ergonomic setting tool for thread size M4 to M8

Applications Suitable for fastening battens, channels, panels and decorative items into

particle / chip board, drywall and hollow blocks

Base material Cavity / perforated bricks / Hardi Wall Plasterboard / gypsum panel (drywall) Hollow brick

Material Galvanized steel

h

do

Is

tfix

d


Drill hole with drill bit. Put anchor into setting tool.

Install anchor with setting tool.

Remove screw from anchor and screw in gain with part being fastened attached.

Anchoring Systems


7

HHD-S programme

Drill bit Anchor Min screw Min /Max Max. nom. length, Thread length Anchorneck panel fasten. Head dia., do I dia., d under head (Is) length thk., h thk., tfix type Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (pcs)

8 20 M4 25 4 3 / 4 15 Pan 100 HHD-S M4/4x20 00332060 8 32 M4 39 6 6 / 7 25 Pan 100 HHD-S M4/6x32 00332061 8 38 M4 45 12.5 10 / 13 25 Pan 100 HHD-S M4/12x38 00332062 8 45 M4 52 19 18 / 20 25 Pan 50 HHD-S M4/19x45 00332063 10 38 M5 45 8 6 / 8 25 Pan 100 HHD-S M4/8x38 00332065 10 52 M5 58 12.5 11 / 13 30 Pan 50 HHD-S M5/12x52 00332066

10 65 M5 71 25 23 / 25 30 Pan 50 HHD-S M5/25x65 00332067 12 38 M6 45 9 7 / 9 20 Pan 100 HHD-S M6/9x38 00332069 12 52 M6 58 12.5 11 / 13 30 Pan 50 HHD-S M6/12x52 00332070 12 65 M6 71 25 23 / 25 30 Pan 50 HHD-S M6/24x65 00332071 12 80 M6 88 40 38 / 40 30 Pan 50 HHD-S M6/40x80 00332072 12 54 M8 60 12.5 11 / 13 30 Hexagon 50 HHD-S M8/12x54 00332073 12 66 M8 72 25 23 / 25 30 Hexagon 50 HHD-S M8/24x66 00332074 12 83 M8 90 40 38 / 40 35 Hexagon 50 HHD-S M8/40x83 00332075

Special Request

OrderingOrder designation Package (pcs) Item No.

Setting tool HHD-SZ 2 1 00332076

Anchoring Systems


min 48mm min W:10mm min 48mm max W:92mm

S=W+12mm

Special Request

Hollow wall metal anchorHTB


AdvantagesHigh loading performance compared to traditional toggle anchors

High application range for wall thickness from 10 to 92 mm

No setting tool required

Small hole diameter required compared to traditional toggle anchors

Applications For M & E applications: lamps, electrical channels and brackets For suspension ceiling and light weight appliances

Base material Hollow concrete Drywall, gas concrete and hollow brick

Material Blue zinc-plated (min 5µm) carbon steel channel

Technical data Recommended load (kN) for HTB M5 and HTB M6, safety factor(�)=3

Base materials Nrec Vrec

Gypsum board 10.0 mm 0.25 0.15

Gypsum board 12.5 mm 0.40 0.30

Gypsum board 2 x 12.5 mm 0.70 0.30

Gypsum fibre board 10 mm 0.40 0.60

Gypsum fibre board 12.5 mm 0.60 1.00

Hollow decks, Cavity to surface thickness ≥ 30 mm 0.50 -

Hollow brick "Parpaing Creux B40" 0.45 0.90


HTB programme Drill bit nom. Screw Screw Wall + Fixture Tighten dia., do dia. length thkness torque Tinst Package Order designation Item no. (mm) (mm) (mm) (mm) (Nm) (pcs)

14 M5 12 + h +tfix# min 10 - max 92 3 100 HTB M5 00236693

14 M6 12 + h +tfix# min 10 - max 92 5 100 HTB M6 0023669414 M5 12 + h +tfix# min 10 - max 92 3 100 HTB-S M5x60* 0023669514 M6 12 + h +tfix# min 10 - max 92 5 100 HTB-S M6x60* 00236696

* including corresponding screw ( Length 60 mm )# h=panel thickness, tfix=fastener thickness

Anchoring Systems


7

Drywall anchorHSP

Installation proceduresHSP / HSP-S: HSP-M6:

AdvantagesShark's tooth design to have a correct positioning and quick installation

One Hilti bit for anchor and screw. No setting tool required

HSP delivered with or without screws

Applications Suitable for fast reliable fixings in drywall

Base material Plasterboard / gypsum panel (drywall)

Material Zinc plated steel

Special Request

HSP Programme Drill bit Anchor Screw Screw Max. nom. length, Thread length dia, fasten. dia., do I dia. ls d thk., tfix Package Order designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (pcs)

- 39 - tfix + 15 4.5 0 - 15 100 HSP 00332682- 39 - 30 4.5 0 - 15 100 HSP-S * 00332683

* Delivered with 100 screws, 4.5 x 30 mm

- 39 M6 - - - 100 HSP-M6 ** 00332684

** Delivered with one bit D-B SQ HSP-G

� �

Order designation Package (pcs) Item No.

Bit for HSP (HSP / HSP-S) D-B PH2 HSP 5 � 00332688

Bit for HSP with connecting thread (HSP-M6)D-B SQ HSP-G

5 � 00332689

l

Is

tfix

d

Anchoring Systems


Ring / hook anchorHA 8

HA 8 Programme Drill bit nom. Min. hole Anchorage Anchor Bolt Package Order designation Item no. dia., do (mm) depth,h1 (mm) depth,hnom (mm) length, l (mm) dia. (mm) (pcs)

8 50 40 66 5 100 HA 8 R1 000570598 50 40 66 5 100 HA 8 H1 00057036


Applications For suspending ceilings and other items from concrete ceiling

Base material Concrete

Material Galvanized steel to min 5µm

Technical data Recommended load (kN)

Model Size HA8 R1 HA8

H2 Concrete at 20 N/mm2 Tensile Load, Nrec 0.80 0.80


h1hnom

do

Anchoring Systems


7

A B C

h

h1

tfix tfix tfixIs

dodo

Light duty anchorHLD


HLD Programme Drill bit Screw Wall Drill bit Screw Wall Drill bit Screw Wall nom. length, Screw Panel nom. length, Screw Panel nom. Hole length, Screw Panel Order dia., do ls dia, d thk, h dia., do ls dia, d thk, h dia., do depth, h1 ls dia, d thk, h Package designation Item no. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (pcs)

A B C 9-10 33+tfix 4-5 4-12 9-10 33+tfix 4-5 12-16 9 50 40+tfix 5-6 from 35 150 HLD 2 003355069-10 40+tfix 4-5 15-19 9-10 40+tfix 4-5 19-25 9 56 46+tfix 5-6 from 42 100 HLD 3 003355079-10 49+tfix 4-5 24-28 9-10 49+tfix 4-5 28-32 9 66 56+tfix 5-6 from 50 100 HLD 4 00335508

AdvantagesResilient togging action to suit every base material

Applications For fastening to weak materials with cavity; connection with commercially

available wood screw

Base material Cavity / perforated

Plasterboard / gypsum panel (drywall)

Hollow brick

Material High-quality polyamide PA 6 (cadmium free)

Technical data Recommended load (kN)

Model SizeWorking

principle HLD 2 HLD 3 HLD 4

Concrete at 15N/mm²Tensile Load, Nrec

C0.25 0.40 0.50


Fibre reinforced gypsum Tensile Load, Nrec

A0.06 - -

panel 12.5mm Shear Load, Vrec 0.06 - -

Fibre reinforced gypsum Tensile Load, Nrec

A- 0.12 -

panel 2x12.5mm Shear Load, Vrec - 0.12 -

Hollow brickTensile Load, Nrec

A / B0.15 0.15 -

Shear Load, Vrec 0.15 0.15 -


Hilti Anchors

Documents

Transcript of Hilti Anchors