A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

Sale is being held in conjunction with

21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

AUCTIONEERS • LIQUIDATORS • APPRAISERS

Hilco Industrial, LLC & Maynards Industries

WEBCAST/ONSITE AUCTION

WILLOW RUN TRANSMISSION #2

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)2

WEBCAST/ONSITE AUCTIONDIRECTIONSFROM DETROIT METROPOLITAN AIRPORT (DTW): EXIT TO I-94. TRAVEL WEST ON I-94 FOR 11 MILES TO EXITFOR WILLOW RUN AIRPORT (EXIT #186). FOLLOW EXIT FOR WILLOW RUN AIRPORT AND MERGE ONTO WIARD RD.TRAVEL ON WIARD RD FOR 1 MILE AND TAKE EXIT FOR AIRPORT RD. MAKE IMMEDIATE LEFT ONTO W. HYDRAMATICDR TO ENTER FACILITY. MUST USE W. HYDRAMATIC ENTRANCE ON WEST SIDE OF PLANT AT FLAG POLES.

FURTHER INFORMATION• NOTE: ALL PEOPLE ENTERING THE PLANT FOR INSPECTION OR THE WEBCAST MUST

WATCH A SHORT SAFETY VIDEO & ADHERE TO ALL MLC SAFETY GUIDELINES.• A BUYERS PREMIUM OF 13.5% FOR ALL ONSITE SALES & 16% FOR ALL WEBCAST SALES WILL

BE IN EFFECT. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.• SPECIFIC REQUIREMENTS FOR REMOVAL ARE POSTED ON OUR WEBSITE AT

WWW.HILCOIND.COM OR CONTACT KEN PLANET AT 248.254.9999 x33 OR EMAIL KPLANET@HILCOIND.COM FOR MORE INFORMTAION ON REMOVAL.

• FOR FURTHER INFORMATION ON MACHINERY & EQUIPMENT, PLEASE CONTACT KEN PLANET AT 248.254.9999 x33 OR EMAIL KPLANET@HILCOIND.COM OR MARIO MAZZUCAAT 248.569.9781 OR MARIO@MAYNARDS.COM

• FOR PAYMENTS PLEASE CONTACT BECKY KUZNICKI AT 517.719.8134 OR EMAIL BECKY@MAYNARDS.COM

• CUSTOMER SERVICE, PLEASE CONTACT SANDI NEELY AT 248.254.9999 X16 OR EMAILSNEELY@HILCOIND.COM

• REMOVAL OF ITEMS REQUIRING DISCONNECT AND RIGGING TO BE PERFORMED BY MLCAPPOINTED RIGGER AT PURCHASER’S COST.

AUCTION DATETHURSDAY, DECEMBER 2ND

BEGINNING AT 10AM LOCAL TIMEPREVIEW DATEWEDNESDAY, DECEMBER 1ST

9AM TO 4PM LOCAL & MORNING OF SALEFOR EARLIER INSPECTION, PLEASE CONTACT KEN PLANET AT 248.254.9999 x33 OR EMAIL KPLANET@HILCOIND.COM

AUCTION & PREVIEW LOCATION2930 ECORSE RD.YPSILANTI, MI 48198

WILLOW RUN TRANSMISSION #2

FINEBLANKING PRESS LINES1 – SCHULER FEINTOOL HFA—8800 PLUS 880 TON FINEBLANKINGPRESS; S/N G/080137 (2007); BT #1000524831 – ARKU AH 5000/500/MSG-40 COIL REEL; S/N 9335; Coil WeightCapacity 5000 Kg (11,000 Lbs); Coil Width 500 mm (19.7”); Upper & LowerRestrictor Arms; Stationary Coil Lift; Hydraulic Expansion (Col K-20)

1 – ARKU RM 5050.4/21 ECOPLAN COIL LEVELLER; S/N 175124; Width 500 mm (19.7”); Hold Down;Peeler; Upper and Lower Back-Ups (Col K-20); BT #10005248/C01045

1 – ABMESSUNGEN RB TS-SW-FK 0450/EBAD-3000PBF COIL FEEDER (2006)1 – SCHULER FEINTOOL HFA—8800 PLUS 880 TON FINEBLANKING PRESS; S/N 7.8078 (2004);

BT #C010461 – ARKU AH 5000/500/MSG-40 COIL REEL; S/N 9302 (2004); Coil Weight Capacity 5000 Kg (11,000

Lbs); Coil Width 500 mm (19.7”); Upper & Lower Restrictor Arms; Stationary Coil Lift; HydraulicExpansion (Col K-20); BT #10005248/C01045

1 – ARKU RM 5050.4/21 ECOPLAN COIL LEVELLER; S/N 175110 (2004); Width 500 mm (19.7”); HoldDown; Peeler; Upper and Lower Back-Ups (Col K-20); BT #10005248/C01045

1 – ABMESSUNGEN RB TS-SW-FK 0450/EBAD-3000PBF COIL FEEDER (2004)

HIGH-SPEED STAMPING PRESS LINE1 – MINSTER PM3-125 125 TON HIGH SPEED PRESS (1998); Stroke 2.75”; Strokes per Minute

190-375; Bed 32” x 48”; Shut Height 20”; Adjustment 4”; Window in Uprights 20”; Minster ConsoleControl with Minster Programmable Limit Switch; Sound Enclosure (Col K-20)

1 – LITTEL 6000X12 6,000 LB DOUBLE END COIL REEL; S/N 93757-98 (1998); Width 12”; ID 20” -24”; OD 60”; Full Backing Plates; Pneumatic Brakes

1 – MINISTER 17 ROLL POWERED STRAIGHTENER, S/N 98155 / 0314609 (1998)1 – VAMCO QUANTUM SERVO FEED, S/N 62.52C141 (1998)

HILCO INDUSTRIAL, LLC &MAYNARDS INDUSTRIES

For more information, please visit us on the web at www.hilcoind.com 3

CNC SHARPENING/GRINDING • CNC GEAR HOBBERS & GEAR SHAVERS

(24) CNC GEAR SHAVING MACHINES6 – MITSUBISHI FA30CNC CNC GEAR SHAVING MACHINES; S/Ns 406 / FA61420C4, 405 / FA61420C4, 407 / FA61422C4, 61268C4 & 404 / FA61419C4 (TO 1993); 5-Axis with

U Capability; Max Workpiece Diameter 310 mm (12.21”); Max Work Module 8; Max Work Tool Width 150 mm (5.91”); Max Distance Between Centers 650 mm (25.59”); MitsubishiFanuc CNC Control

18 – HURTH ZS240T CNC CNC GEAR SHAVING MACHINES; S/Ns 44519, 44648, 44520, 44518, 44517, 44516, 44480, 44486, 44483, 44481, 44493, 44478, 44484, 44487, 44647, 44526,44525 & 44524 (TO 1996); Max Wheel Diameter 390 mm (15.36”); Max Work Module 8; Max Gear Width 50 mm (1.97”); Allen Bradley 9 Series CNC Controls; AB 8500 Servo Drives

CNC BROACH SHARPENING /UNIVERSAL TOOL GRINDER1 – STAR UTG1800 5-AXIS CNC UNIVERSAL TOOL

GRINDER; Z-Axis Grinding Stroke 2080 mm(81.9”); Max Length Between Centers 2600 mm(102”); Spindle RPM 14,400 Max; Linear AxisTravel X - 340 mm (13.4”); Y - 240 mm(9.43”),Rotary Axis Travel: A - 0 to 360 Deg (Col N-41); BT #214497

1 – AMERICAN BROACH & MACHINE CNC-UBS-108-6A 6-AXIS CNC BROACH SHARPENINGMACHINE; S/N 99506E01 (2005); Travels: X - 108”; Y - 14”; Z - 14”; H (B/Hook) +/- 360 Deg;S (C/Shear) +/- 30 Deg; A - 360 Deg; Spindle RPM14,000 Max; Dura Pulse 6 HP AC Drive; MachineMate CNC Control; Allen Bradley Drive System(Col N-41); BT #100010632

(27) CNC GEAR HOBBING MACHINES1 – PFAUTER PE 150 CNC GEAR HOBBING MACHINE1 – PFAUTER PE 80 CNC GEAR HOBBING MACHINE; S/N 27867; Nominal Workpiece Diameter 3.15”; GE

Fanuc 15 M CNC Control; Coolant; Chip Conveyor (Loc G-47); BT #160541 – PFAUTER PE 80 AW CNC GEAR HOBBING MACHINE; S/N 28173 (1996); Nominal Workpiece Diameter

3.15”; Allen Bradley/9 Series CNC Control; Allen Bradley Drives; Coolant; Chip Conveyor; BT #1653515 – PFAUTER PE 80 CNC GEAR HOBBING MACHINES; S/Ns 28031, 28030, 28022, 28021, 27922, 27899,

27898, 27935, 27897, 27294, 27294, 28172 , 28034, 28036 & 28035 (TO 1996); Nominal Workpiece Diameter3.15”; Allen Bradley/9 Series CNC Control; Allen Bradley Drives; Coolant; Chip Conveyor

3 – MITSUBISHI GB15CNC CNC GEAR HOBBING MACHINES; S/Ns 288, 15526C3 & 235 (TO 1995); Max Workpiece Diameter 200 mm (7.88”); Fanuc O-M CNC Control

3 – MITSUBISHI GB10CNC CNC GEAR HOBBING MACHINES; S/Ns 89, 90 / GB10116C3 & 10068C3 (TO 1995); Max Workpiece Diameter 100 mm (3.94”); Axial Travel 250 mm (9.85”); Max Hob Length 150 mm(5.91”); Hob Speed Range 150 - 1,500 RPM; Chip Conveyor; Mitsubishi Fanuc CNC Control

1 – GLEASON 777 CNC GEAR HOBBING MACHINE; S/N 789705; Includes: Allen Bradley Series 8200 Control2 – GLEASON 775 GEAR HOBBING MACHINES; S/Ns 789406 & 789403

CNC VERTICAL & HORIZONTAL MACHINING & TURNING CENTERS

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)4

(11) CNC VERTICAL MACHINING CENTERS6 – ENSHU ES4000 COMPACT BRIDGE STYLE CNC VERTICAL MACHINING CENTERS, S/Ns 03C185 / 211, 03C189 / 210, 04C027 / 218, 03C199 / 226, 04C232 /

229, 03C200 / 227 (TO 2006)1 – ENSHU JE50S CNC HORIZONTAL MACHINING CENTER, S/N 03C198 / 631 (2006)1 – KITAMURA MY CENTER 4 CNC 3-AXIS VERTICAL MACHINING CENTER; S/N 30323; Table 20” x 45”; Travels: X-36”; Y-20”; Z-22.5”; 20 Position Automatic Tool

Changer - 40 Taper; Spindle Speeds 30-7000; Feeds 0-196.8 IPM; Rapid Traverse 393.7 IPM; Daikin Oil Cooler (Col A-43/Die Shop); BT #214046/141211 – SAGINAW MACHINE SYSTEMS AC300 4-AXIS VERTICAL TURNING CENTER; Dual Spindle; Dual Chucks (Col H-51)1 – GMR / KRUEGER VK1055 TWINHORN VERTICAL MACHINING CENTER; S/N V0312611; Table 21.6” x 43.3”; Travels: X - 40.1”; Y - 21.6”; Z - 21.6”; Spindle Nose

to Table 5.9” - 27.5”; Dual Arm Tool Changer; Fanuc Oi-MB CNC Control; 20 Position Automatic Tool Changer (Col H-54); BT #2145471 – MILWAUKEE VB-2 CNC 4-AXIS VERTICAL MACHINING CENTER; S/N 5583191; Table 16” x 56”; 18 Position Automatic Tool Changer - 40 Taper; Spindle Speeds

3200 RPM Max; Power Clamp; Kearney & Trecker 4th Axis Rotary Chuck; Kearney & Trecker Intelligent Drive (Col A-43/Die Shop); BT #214047/14185

(13) CNC HORIZONTAL MACHINING CENTERS4 – MAZAK H-400N 4-AXIS CNC HORIZONTAL MACHINING

CENTERS; S/Ns 110755; 94914; N/A & N/A; Dual Pallets15.75” x 15.75”; Travels: X - 22.05”; Y - 20.08”; Z - 20.08”; 30 Position Automatic Tool Changer; 40 Taper; Mazatrol M32CNC Control

9 – TOYODA FA 550 4-AXIS CNC HORIZONTAL MACHINING CENTERS; S/Ns NM7416; NM7417; NM7418; NM7464;NM7466; NM7647; NM7485; NM7463; NM7414; Dual Pallets21.6” x 21.6”; Travels: X - 28”; Y - 28”; Z - 22”; Spindle Speeds6,000 Max; 48 Position Automatic Tool Changer; 50 Taper; GEFanuc 15-M CNC Control (Col B-25)

(11) CNC TURNING CENTERS4 – OKUMA LNC-8G CADET 4-AXIS CNC TURNING CENTERS;

S/Ns 0609C195; 0601B8T6; 0704C728; 0709C957; 12 PositionTurret; Max Turn Diameter 9.81”; Max Turn Length 15.69”; GE Fanuc18T CNC Control; Chip Conveyor; Fanuc LR Mate100 Robot; Teach Pendant (Col H4-44)

5 – HARDINGE CONQUEST 42 CNC 4-AXIS LATHE; 10 Position Turret;Programmable Tailstock; Chip Conveyor; Fanuc O-T CNC Control

2 – GEORG FISCHER NDM 16-4/80 CNC 4-AXIS LATHES; S/Ns 33192 & 33444; Turn Diameter 6.299”; Turning Length 31.49”;Twin Turrets - 12 Position; Tailstock; Sinumerik Sys 3 Control;Feedback Gauging System; Mayfran Chip Conveyor

SPLINE ROLLERS • HONE • GRINDERS • BORING MILL • BROACHES

For more information, please visit us on the web at www.hilcoind.com 5

SPLINE ROLLERS1 – ANDERSON COOK 3225 SPLINE ROLLER; S/N 3252;

Motor & Hydraulic Pump; Overarm Tailstock (Col A3-68);BT #210392/8941

1 – ANDERSON COOK 350 SPLINE ROLLER; S/N 219;Motor & Hydraulic Pump; Overarm Tailstock (Col H2-56)

1 – ANDERSON COOK 350 MARAND SPLINE ROLLER;S/N 217; Motor & Hydraulic Pump; Overarm Tailstock

2 – ANDERSON COOK 350 S 200 SPLINE ROLLERS; S/Ns 212 & 386; 75 HP Motor & Hydraulic Pump; Overam Tailstock

CNC HONING MACHINE1 – NAGEL 2HS6-30 CNC HONING MACHINE; S/N 28-7114;

Horizontal Spindle; Allen Bradley Panelview 1200 Terminal

BROACHING MACHINES1 – FEDERAL 50-TON VERTICAL PULL-UP BROACHING

MACHINE; S/N 91-V-101; Stroke 48”; 60 HP Motor &Hydraulic Pump (Col H-42); BT #207067/15612

1 – FEDERAL 20-TON VERTICAL PULL-DOWN BROACHING MACHINE; S/N 81-H-103; Stroke 42”;Motor & Hydraulic Pump

1 – AMERICAN BROACH & MACHINE 42” VPD 10 TONVERTICAL PULL-DOWN BROACHING MACHINE; S/N85123; Stroke 42”; 30 HP Motor & Hydraulic Pump; AllenBradley 550 Panelview Terminal (Col H-51)

1 – AMERICAN BROACH & MACHINE 30-TON VERTICALBROACHING MACHINE; S/N 70183; 30 Ton; Stroke 60”;75 HP Motor & Oilgear Pump

1 – NATIONAL VERTICAL BROACHIING MACHINE

CNC TOOL & CUTTER GRINDERS1 – WALTER HELITRONIC 50 CNC CNC TOOL & CUTTER

GRINDER; S/N 938; Walter 50 CNC Control1 – WALTER GC-6 CNC TOOL & CUTTER GRINDER; S/N 052;

Walter Helitronic CNC Control

HORIZONTAL TABLE TYPE BORING MILL1 – GIDDINGS & LEWIS PC-50X HORIZONTAL TABLE TYPE

BORING MILL / PRODUCTION CENTER; S/N 445-159-86;Table 60” x 120”; Spindle Diameter 5”; Spindle Taper #50;Spindle Travel 36”; Headstock Travel 84”; Table Cross Travel120”; Saddle Travel 62”; Power Drawbar; 40 PositionAutomatic Tool Changer (S/N 050-2294-86); Spindle Motor30 HP; DeVlieg S/N 94764 Rotary Table - 30” x 30”; NumeriPath 8000 Control (Col A-43/Die Shop); BT #214042

CYLINDRICAL GRINDERS2 – NORTON CV-4 10” x 18” OD CYLINDRICAL GRINDERS; (Col H4-58); BT #63282 – NORTON 1018GV 10” x 18” OD CYLINDRICAL GRINDERS; BT #156412 – WARNER & SWASEY 10 x 18 GTU 10” x 18” OD CYLINDRICAL GRINDERS1 – CINCINNATI 14 X 48 UNIVERSAL CYLINDRICAL GRINDER; S/N 35324E; Tail Stock; 10” - 4 Jaw Chuck; Max Speed 14,480

RPM; 2 HP ID Grinding Drive; Sony 2-Axis DRO; BT #207554/129111 – CINCINNATI 12 X 36 UNIVERSAL CYLINDRICAL GRINDER; S/N 35323D5U-0012; Suburban Tool 12” Diameter Electromagnetic

Chuck; ID Attachment (Col B-47/Balcony); BT #211685/10389

COORDINATE MEASURING MACHINE1 – ZEISS MC 8/12/6 COORDINATE MEASURING MACHINE; S/N 88679; Table 40” x 83.5”; Pendant Control; HP Computer

& Printer; UMESS Software (Col B-32); BT #209028

For more information including lot catalog, photos & more, please visit

www.hilcoind.com

TOOLROOM • FABRICATING MACHINERY • HEAT TREAT EQUIPMENT

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)6

FABRICATING MACHINERY1 – NIAGARA IF-10-1/4 II 10’ x 1/4” HYDRAULIC SQUARING SHEAR; S/N S65713; Front Operated Power

Back Gauge; Power Rake Adjustment; Front Stock Supports; MPC2100 Gauge Control (Col P-47/SheetMetal Shop); BT #213250/14899

1 – ACCURSHEAR 625010 10’ x 1/4” HYDRAULIC SQUARING SHEAR; S/N 2022; Backgauge Control;Front Stock Supports (Col P-47/Sheet Metal Shop); BT #212569

1 – NIAGARA HBM-230-10-12 230 TON HYDRAULIC PRESS BRAKE; S/N 52448; Overall Bed & Ram 12’;Between Housings 10’ 6”; Stroke 10”; Open Height 17”; Floor Standing; Two-Axis Manual Back Gauge;Throat 8” (Col P-47/Sheet Metal Shop); BT #21257/14525

1 – ACCURPRESS 717510 175 TON HYDRAULIC PRESS BRAKE; S/N 3022; Overall Bed & Ram 10’;Between Housings 8’ 6”; Floor Standing; Front Stock Supports (Col P-47/Sheet Metal Shop); BT #212563

1 – DREIS & KRUMP S0-1014 10’ x 14 GAUGE APRON BRAKE; S/N 322882-M; (Col P-47/Sheet Metal Shop)1 – DREIS & KRUMP S0-812 8’ x 12 GAUGE APRON BRAKE; S/N 322565-M; (Col P-47/Sheet Metal Shop)1 – ESAB / HEATH GXAC 600-CFC110 CNC PLASMA CUTTING SYSTEM; S/N HGC 427; Hypetherm Max

100 Power Source; Cybermation Control; Cutting Area 84” x 336” (Col P-47/Sheet Metal Shop)1 – VERTICAL BAND SAW; S/N S36V-118; Throat 36”; Blade Welder

TOOL ROOM EQUIPMENT1 – BRIDGEPORT EZ TRAK 2-AXIS CNC VERTICAL MILL;

S/N 278430E; Power Feed Table 9” x 48”; Kurt AutomaticPower Draw Bar; Quill Travel 5”; 2 HP; Vari-Speed;Bridgeport BPC2M Control (B-29 Balcony); BT #211795

1 – BRIDGEPORT SERIES 1 VERTICAL MILL; S/N 227551;Power Feed Table 9” x 48”; Power Draw Bar; Quill Travel 5”;2 HP (B-29 Balcony); BT #212270

1 – KEARNEY & TRECKER S-15 VERTICAL MILLINGMACHINE; Acu-Rite Master MP Digital Read Out (Col A-43/Die Shop); BT #214056/13157

2 – PRATT & WHITNEY 2A PRECISION JIG BORERS; S/Ns 22598 & 22599; Table 22” x 44”; Wizard DRO; YuasaAccu-Dex Indexer

1 – MOORE JIG GRINDER; Table 11” x 24”; 3-Axis DRO (Col B-47/Balcony); BT #211680/4945

1 – SIP TYPE HY-6 HYDROPTIC JIB BORE; S/N 83; Table 33”x 43”; Between Columns 43.5”; Travels: Longitudinal Table40”; Horizontal Spindle Head 28”; Vertical Cross Rail 31.25”;Spindle Speeds 40-2000 RPM (Col A-43/Die Shop)

1 – DEVLIEG 43K-72 SPIRAMATIC JIG MILL; S/N 9895; Table35” x 72”; Travels: Longitudinal Table 72”; Vertical Spindle48”; Spindle Bar 20”; DeVlieg Rotary Table 30” x 30” (S/N94805) (Col A-43/Die Shop); BT #21404/12726

1 – MONARCH TOOL ROOM TYPE 20” x 54” ENGINELATHE; S/N 52603; Center Distance 54”; Tail Stock; CrossSlide; 12” - 3 Jaw Chuck (Col B-28/Balcony)

1 – MONARCH TOOL ROOM TYPE10” x 20” ENGINELATHE; S/N 46685R; Actual Swing 12.5”; Center Distance20”; Tail Stock; Cross Slide; 6” - 3 Jaw Chuck; Hole ThroughSpindle 1.25” (Col B-28/Balcony)

1 – BLANCHARD 22K-42 ROTARY SURFACE GRINDER; S/N 15164; 42” Diameter Magnetic Chuck; Wheel RPM 720;Coolant Filtration System; Neotrofier Control (Col B-48/Balcony); BT #211799

1 – BROWN & SHARPE 1236 MICROMASTER HYDRAULICSURFACE GRINDER; S/N 523-1236-2402; ElectromagneticChuck 12” x 36”; Coolant (Col B-28/Balcony); BT #14236

1 – MAC BLAST 9-48X48 BL BLAST CABINET; S/N 5911-95;Includes Pangborn Dust Collector; Mdl 1CD1 (BT 211789)

BEAM WELIDNG • RESISTANCE WELDING • SCREW MACHINES • BLAST CLEAN

For more information, please visit us on the web at www.hilcoind.com 7

ASSEMBLY MACHINES1 – NOVI PRECISION TRANSMISSION HUB ASSEMBLY MACHINE;

S/N 100044925; 6-Station Indexing Table; (4) Workstations; Pick-n-Place Gantry Robot; Siemens CNC Control With simatic Multi-PanelOperator Terminal; Station 3 With Automated Vibratory Parts Feeder;CD Weld Cell #6,

1 – NOVI PRECISIONTRANSMISSION HUB ASSEMBLY MACHINE;S/N 04-007/06-007A; 6-Station Indexing Table; (4) Workstations;Pick-n-Place Gantry Robot; Siemens CNC Control With SimaticMulti-Panel Operator Terminal; Station 3 With Automated VibratoryParts Feeder; CD Weld Cell #5,

1 – PECO 2-6 & 3-5R PUSHOUT TESTER; S/N NA; C-Frame HydraulicPress; Bed Area 18-1/2”LR x 16-1/2”FB; 6” Ram Diameter; RamMounted Load Cell Sensor; Siemens Simatic OP3 & Promess PPMMicroprocessor PLC Touch Pad Controls; 10-HP Hydrualic PowerUnit; With BT# 100005484; (2) Press Toolholder Racks With Tooling,

1 – NOVI PRECISION AUTOMATED HUB CRIMPING / ASSEMBLYMACHINE; S/N 04005; Siemens Simatic Multi-Panel CNC Control;RHM 5-HP Hydraulic Power Unit With Nitrogen Gas ChargedAccumulator

HEAT TREAT EQUIPMENT2 – LINDBERG 11-SC-243618-25A GAS FURNACES;

S/Ns 24669 & 24670; Max Temp 2500 Deg F;Electrical Panel

1 – TOCCO HEAT TREAT LINE

ELECTRON BEAM WELDING 3 – ADVANCED VACUUM RESOURCES NVW 300

ELECTRON BEAM WELDING SYSTEMS; S/Ns NVW-0002, NA & NA (1998); Includes SPELL-MAN EBS HIGH VOLTAGE Supply; AVR Model MS-HI Helium Mass Spectrometer; VARIAN Model#990-CLD Autoline Leak Detector; Rotary Turntable;FERGUSON Pick & Place Loader/Unloader; Two(2) Stokes Model G15-1 Vacuum Pump Units

RESISTANCE WELDING MACHINES2 – PECO CAPACITIVE DISCHARGE RESISTANCE

WELDING MACHINES; S/Ns 367015 & 367016; (CD WELDER); Designed For 2-6 & 3-5 Hub Assembly;Dual 3400 Volt Transformers; PLC Enclosure Cabinet;Siemens Sinumerik CNC Control Pendant; With (1) Koolant Kollers Model HEX00025PR-SW-G Chiller;S/N HE0826; (1) Triad 10 & 2-HP Hydraulic Power Unit;(1) In-Line Automatic Pin-Stamp Marking Machine; CDWeld Cell #1 & #3

BALANCING CELLS1 – BALANCE ENGINEERING BALANCING CELL; S/N N/A; BALANCER; S/N N/A; BT #17137; Medweld Weld Control; 5

HP RHM Hydraulic Power Unit; Col A-55 (300 MM)1 – BALANCE ENGINEERING BALANCING CELL; S/N 3433; BALANCER; S/N 3433; BT #16983 / 209902; Medweld

700S Weld Control; 5 HP RHM Hydraulic Power Unit; Col A-55 (300 MM)1 – BALANCE ENGINEERING BALANCING CELL; S/N 3431; BALANCER; S/N N/A; BT #16935; Control CBI55; Roman

Weld Transformer; Medar 700S AC Weld Control; RHM Hydraulic Power Unit; Col A-55 (300 MM)1 – BALANCE ENGINEERING BALANCING CELL; S/N 3432; BALANCER; S/N 3432; BT #16982 / 209333; Medweld Weld

Control; 5 HP RHM Hydraulic Power Unit; Col A-55 (300 MM)1 – BALANCE ENGINEERING MODEL BMRP-2187 BALANCING CELL; S/N 3430; BALANCER; S/N N/A; BT #16934;

Control CBI55; Roman Weld Transformer; Medar 700S AC Weld Control; RHM Hydraulic Power Unit Col A-55 (300 MM)1 – BALANCE ENGINEERING MODEL BMRP-2187 BALANCING CELL; S/N 3521; BALANCER; S/N N/A; BT #17126 / 209329;

Control CBI55; Roman Weld Transformer; Medar 700S AC Weld Control; RHM Hydraulic Power Unit; Col A-55 (300 MM)

(38) AUTOMATIC SCREW MACHINES5 – ACME GRIDLEY RB6-6” SIX SPINDLE AUTOMATIC SCREW MACHINES; S/Ns BC-88022, BC-88108,

BC-88105, BC-88044 & BC-88045; Bar Stand7 – ACME GRIDLEY RB8 - 2 5/8” EIGHT SPINDLE AUTOMATIC SCREW MACHINES; Five Slides; Bar Stand18 – ACME GRIDLEY RB6 - 2 5/8” SIX SPINDLE AUTOMATIC SCREW MACHINES; Six Slides; Bar Stand1 – ACME GRIDLEY RB6 - 1 5/8” SIX SPINDLE AUTOMATIC SCREW MACHINES; S/Ns 40491A;

Five Slides; Bar Stand1 – ACME GRIDLEY RA6 - 1 1/4” SIX SPINDLE AUTOMATIC SCREW MACHINES; S/Ns 71865; Five Slides;

Bar Stand4 – ACME GRIDLEY RA6 - 1” SIX SPINDLE AUTOMATIC SCREW MACHINES; S/Ns 23112-A; 23632;

A23283; 23952; Five Slides; Pickoff; Bar Stand1 – ACME GRIDLEY RAN6 - 1” SIX SPINDLE AUTOMATIC SCREW MACHINE; S/N C23326N; Five Slides;

Bar Stand1 – ACME GRIDLEY RA8 - 3/4” EIGHT SPINDLE AUTOMATIC SCREW MACHINE; S/N BD70282; Six Slides;

Bar Stand

BLAST CLEAN SYSTEMS1 – PANGBORN TUMBLAST BLAST CLEAN SYSTEM; S/N A132287; Bucket Width 27”; Chamber Width 30”;

Dust Collector1 – PANGBORN GNR BLAST CLEAN SYSTEM; S/N 3GNR-73414; Includes Pangborn Dust Collector; S/N 3GNR-73414

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 100

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco Trading, LLC • Headquarters – 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved Printed in USA • MOTO3488 • IL License #444000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX)Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • Phoenix • San Francisco • Toronto • Villahermosa (MX)

Terms of SaleA buyer’s premium of 13.5% for onsite sales & 16% for webcast sales is in effect. Everything will be sold tothe highest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted on the premises of the sale and subject toadditional terms announced the day of sale. All items willbe sold “as is, where-is” without any warranties, expressor implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guaranteeto the accuracy of the information herein contained.Bidders are encouraged to thoroughly inspect the itemson which they intend to bid prior to sale. Absolutely noitems will be removed until the day after the conclusion ofthe sale and payment is made in full. Subject to additions,deletions and prior sale.

Payment: ALL PURCHASES MUST BE PAID IN FULL ONTHE DAY OF THE AUCTION. If you intend to pay by wiretransfer, we will accept payment the day after the saleONLY IF a deposit of 25% of total purchases is made onthe day of the sale. Contact our office for wire transferinstructions. Only cash, wire transfer or certified check,payable to Maynards Industries will be accepted.Company checks payable to Maynards Industries will beaccepted only if accompanied by a bank letter of guarantee, (see sample letter below). All sales are subjectto sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of theirentitlement to claim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment toMaynards Industries from (Company Name). Thisguarantee will be valid for purchases made at theAuction of Motors Liquidation Company Willow RunTransmission on Thursday, December 2, 2010.

WEBCAST/ONSITE AUCTION

WILLOW RUN TRANSMISSION #2