A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Equipment no longer required in the continuing operations of Seco Tools,

due to the closure of the Lenoir City, TN location.

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Prefer click-to-bid? Register and bid on

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

HilcoTM Industrial

AUCTION DATE

THURSDAY, AUGUST 21ST

BEGINNING AT 10AM LOCAL TIME

PREVIEw DATESTUESDAY & WEDNESDAY, AUGUST 19

TH& 20

TH

8AM TO 4PM LOCAL TIMEFor eArlIer InspeCtIon, pleAse ContACt MArk reynolds At 205-595-5999 or eMAIlMreynolds@HIlCoGloBAl.CoM

AUCTION &  PREVIEw LOCATION4700 INDUSTRIAL PARK DR LENOIR CITY, TN 37771

DIRECTIONSFROM MCGHEE TYSON AIRPORT: EXIT AIRPORT TO I-140 W. TAKE EXIT 1D FOR I-40 W / I-75 S. KEEP LEFT AT THE FORK TO CONTINUE ON I-75. EXIT AT US-321 N AND TURN LEFT.CONTINUE TO E. BROADWAY ST AND TURN RIGHT. TURN LEFT ONTO INDUSTRIAL PARK DRAND FOLLOW SIGNS TO AUCTION SITE.

FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER'S

PREMIUM WILL BE REDUCED TO 16% FOR ALL ONSITE AND HILCAST WEBCASTBUYERS FOR PAYMENTS MADE BY MEANS OF CASH, CASHIER’S CHECK, COM-PANY CHECK (WITH BANK LETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN48 HOURS OF SALE CLOSE. AN 18% BUYER'S PREMIUM WILL BE CHARGED FORALL BIDSPOTTER PURCHASES WITH NO DISCOUNT FOR PROMPT PAYMENT.AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS THURSDAY, SEPTEMBER 4TH WITH HOURS OF REMOVALBETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITEAFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.

MACHINERY &  EQUIPMENT

MARK REYNOLDS 205-595-5999 • MREYNOLDS@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT HIN_AR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COMSANDI NEELY AT 248-254-9999 X16 • SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

WEBCAST/ONSITE AUCTION

Prefer click-to-bid?Register and bid on

Bid Onsite or Bid remotely with HilCast

Gun DriLLTECHNIDRILL MODEL GD-0.75-6-1A-PLC-18-DSTWIN SPINDLE BTA – EJECTOR GUN DRILL, S/N 7342 08-12 (2012), 18” Stroke, 3 HP Spindles,460 Volt, LNS Model 52988403 Chip Conveyor, MistBuster Air Cleaner

2012

Limited Production Hours

For more information, please visit us on the web at www.hilcoind.com 3

GUN DRILL • CNC TURNING & MILLING CENTERS • CNC TURNING CENTERS

Partial Listing Only,

Please Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

CnC TurninG & MiLLinG CenTers1 – MORI SEIKI MODEL ZL-25MC CNC TURNING &

MILLING CENTER, S/N 139 (1996), Moric-D6FControl, Kitagawa B-210 3-Jaw Chuck, 12-PositionUpper Turret w/ (6) Driven Positions, 8-PositionLower Turret, Hydraulic Tailstock, 220 Volt, LNS62888073 Chip Conveyor, 45 kva Transformer

2 – MORI SEIKI MODEL ZL-25MC / 1000 CNC TURNING& MILLING CENTERS, S/N 164, BIG BORE, 40”Centers, S/N 167 (Both 1996), MSD-516 Control,Production Dynamics FULL BORE Mechanical Grip /Air Released Chuck, 12-Position Upper Turret w/ (6)Driven Positions, 8-Position Lower Turret, HydraulicTailstock, 220 Volt, Enomoto EA-25058 ChipConveyor, LNS Quick Load Bar Feed, 45 / 75 kvaTransformer

1 – MORI SEIKI MODEL NLX2500SY / 700 CNC TURN-ING & MILLING CENTER, S/N NL254111202 (2011),M730BM Control, 5th Axis, 12-Position Turret,Kitagawa BB210 3-Jaw Chuck On Main Spindle,Kitagawa B0206 3-Jaw Chuck On Sub Spindle, ToolPresetter, Max Turning Length 28.7”, Max TurningDiameter 18.1,” Max Bar Diameter 3.1”, 220 Volt,LNS 57508063 Chip Conveyor, LNS Q.L. Servo S3Bar Feed, 75 kva Transformer

CnC TurninG CenTers1 – MORI SEIKI MODEL DL-25MC TWIN SPINDLE TWIN TURRET

CNC TURNING CENTER, S/N 74 (1997), MF-D6 Control, (2) KNC-S-315 Chucks, (2) 12-Position Turrets, Gantry Style AutoLoader, 16-Position Parts Carousel, Jorgensen Chip Conveyor,220 Volt, 75 kva Transformer

1 – MORI SEIKI MODEL DL-150 TWIN SPINDLE TWIN TURRETCNC TURNING CENTER, S/N 169 (1997), MSC-518 Control, (2)KNCS-N-170-43 Chucks, (2) 12-Position Turrets, Gantry StyleAuto Loader, 18-Position Parts Carousel, LNC Quick Load BarFeed, Jorgensen Chip Conveyor, 220 Volt, 75 kva Transformer

1 – MORI SEIKI MODEL SL-5A CNC TURNING CENTER, S/N 642,Fanuc 11T Control, 10” 3-Jaw Chuck, 12-Position Turret,Hydraulic Tailstock, 220 Volt, Enomoto EA-24443 Chip Conveyor,75 kva Transformer

1 – CINCINNATI MILACRON MODEL 28 CIN TURN MO CNCCHUCKER, S/N 5306C28-78-013, Acramatic 850SX Control, 28” 3-Jaw Chuck, 8-Position Turret, 50 HP, 440 Volt

20115th Axis

CNC VERTICAL MACHINING CENTERS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

(12) CnC VerTiCAL MACHininG CenTers2 – MORI SEIKI MODEL SV-500B 5-AXIS CNC VERTICAL MACHINING

CENTERS, S/N 1736 (1999), S/N 1210 (1998), MSC-502 Control, 40 Taper10,000 RPM Spindle, 40 Position ATC, Travels: X-40”, Y-20”, Z-20”, TrunnionRotary Table, Riser Blocks, Table Mount Tool Presetter, Mayfran Chip Conveyor,220 Volt, 75 kva Transformer

2 – MORI SEIKI MODEL SV-50B 5-AXIS CNC VERTICAL MACHINING CENTERS, S/Ns 814, 785 (Both 1997), MSC-516 Control, 40 Taper 10,000 RPMSpindle, 40 Position ATC, Travels: X-40”, Y-20”, Z-20”, Tsudakoma TrunnionRotary Table, Riser Blocks, Table Mount Tool Presetter, Mayfran Chip Conveyor,220 Volt, 75 kva Transformer

1 – MORI SEIKI MODEL SV-50 5-AXIS CNC VERTICAL MACHINING CENTER,S/N 349 (1996), MSC-516 Control, 40 Taper 10,000 RPM Spindle, 40 PositionATC, X-31.5”, Y-20”, Z-20”, Nikken Trunnion Rotary Table, Riser Blocks, TableMount Tool Presetter, Mayfran Chip Conveyor, 220 Volt, 75 kva Transformer

2 – MORI SEIKI MODEL SV-50 CNC VERTICAL MACHINING CENTERS, S/Ns 827, 838 (Both 1997), MSC-516 Control, 40 Taper 10,000 RPM Spindle,40 Position ATC, Travels: X-40”, Y-20”, Z-20”, Table Mounted Tool Presetter, (2)Kurt 4” Air Actuated Vises, Wired For 4th/5th Axis, Mayfran Chip Conveyor, 220Volt, 75 kva Transformer

1 – MORI SEIKI MODEL SV-50 3-AXIS CNC VERTICAL MACHINING CENTER,S/N 1527 (1998), MSC-501 Control, 40 Taper 10,000 RPM Spindle, 40 Position ATC, Travels: X-31.5”, Y-20”, Z-20”, Table Mounted Tool Presetter,(2) Kurt 4” Double Air Actuated Vises, Turbo 5475-8159 Chip Conveyor, 220Volt, 75 kva Transformer

3 – MORI SEIKI MODEL MV-40 4-AXIS CNC VERTICAL MACHINING CENTERS, S/Ns 1423, 1427, 2749, Fanuc 10M / MF-M4 Control, 40 TaperSpindle, (2) with Nikken Rotary Table, (1) with Kurt 8” Vise, , Table MountedTool Presetter, 20 Position ATC, Chip Conveyor, 220 Volt, 45 kva Transformer

1 – MATSUURA MODEL MC-1000V-DC TWIN-MASTER 2 3-AXIS TWIN SPINDLE CNC VERTICAL MACHINING CENTER, S/N 81021964, Mark Century1050 Control, 19.5” x 55” Table, (2) 3000 RPM Cat 45 Taper Spindles, 12” x 24”Electro-Magnetic Chuck, (2) 30-Position ATC, 220 Volt, 63 kva Transformer

5th Axis Trunnion Table

5th Axis Trunnion Table5th Axis Trunnion Table

CNC HORIZONTAL MACHINING CENTERS • TOOL PRESETTERS & HOLDERS

For more information, please visit us on the web at www.hilcoind.com 5

CnC HorizonTAL MACHininG CenTers1 – MORI SEIKI MODEL SH-630 5-AXIS CNC HORIZONTAL

MACHINING CENTER, S/N 204 (1997), MSC-516 Control,10,000 RPM 50 Taper Spindle, 60 Position ATC, (2) 24.8” x 24.8”Pallets, (1) Pallet w/ 5th Axis, 220 Volt, 112.5 kva Transformer

1 – MORI SEIKI MODEL SH-500 5-AXIS CNC HORIZONTALMACHINING CENTER, S/N 921 (1998), MSC-502 Control,10,000 RPM HSK 63 Taper Spindle, 120 Position ATC, 5th Axisw/ HSK 100 Work Holder, 60 Position AWC, Coolant Tank w/Chip Conveyor, 220 Volt, 75 kva Transformer

1 – MORI SEIKI MODEL SH-50 5-AXIS CNC HORIZONTALMACHINING CENTER, S/N 567 (1997), MSC-516 Control,10,000 RPM HSK 63 Taper Spindle, 120 Position ATC, 5th Axisw/ HSK 100 Work Holder, 60 Position AWC, Coolant Tank w/Chip Conveyor, 220 Volt, 75 kva Transformer

1 – GIDDINGS & LEWIS MODEL ORION 2200 5-AXIS CNC HORIZONTAL MACHINING CENTER, S/N 592-0100-94,Modular D Control, 5000 RPM 50 Taper Spindle, 50 PositionATC, 5th Axis 50 Taper Work Holder, 50 Position AWC,Jorgensen Chip Conveyor, 460 Volt

TooL PreseTTers & HoLDers1 – KELCH MODEL 960 EA 8 TOOL PRESETTER, S/N 6003

2 – KELCH MODEL KALIMAT C TOOL PRESETTERS, S/Ns 1065, 1018 (1997)

1 – KELCH MODEL KAL 500 EA6 TOOL PRESETTER, S/N 517

2 – KELCH MODEL 330 AE3 TOOL PRESETTERS, S/Ns 3081, 3082

1 – CUSTOM DESIGNED & FABRICATED SHRINK FIT TOOL PRESETTER, EFD ModelFC 21B S10-30 MI Power Source, Pioneer Chiller

LARGE QUANTITY OF TOOL HOLDERS, Including: Cat 50, Cat 40, HSK 100, HSK 63

HEAT TREAT • COATING LINE • INSPECTION • MARKING MACHINES

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

2002

HeAT TreAT equiPMenT1 – LINDBERG MODEL 13-CT-304830-18AQC-1

ELECTRIC –GAS QUENCH FURNACE, S/N 25340,Maximum Temp. 1800° F, (2) Soak Timers, (1)Quench Timer, 32” x 31” Opening

1 – LINDBERG MODEL 11-RO-183618-2025086ELECTRIC DRAW FURNACE, S/N 25086, Max.Temp. 2000° F, Chamber Area 18” Wide x 36” Deepx 18” High, 460 Volt

1 – LINDBERG MODEL 13-ECF-304830-12 ELECTRICDRAW FURNACE, S/N 25434, Max. Temp. 1250° F,Chamber Size 30” Wide x 48” Deep x 30” High, 460 Volt

1 – LINDBERG ELECTRIC DRAW FURNACE, Max.Temp. 1250° F, Chamber Area 30” wide x 48” Deepx 30” High, 460 Volt

1 – THERMCRAFT MODEL OVS-383838-454-HD-11688-1A ELECTRIC OVEN, S/N 982373 (1998),Max. Temp 850° F, Chamber Area 38” x 38” x 38” F,3000 Watt, 230 Volt

1 – LUCIFER MODEL HL7-K12 BOX FURNACE, S/N 6467, Max. Temp. 2300° F, Chamber Area 12” x 12” x 12” 460 Volt

1 – LINDBERG MODEL 78-SH-304830-10S ELECTRICWASHER, S/N 25435, Chamber Size 30” Wide x 48”Deep x 30” High, Weight Cap. 2250 Lb.

1 – LINDBERG MODEL PACECAR TRANSFER CART

CoATinG Line1 – (8) TANK BLACK OXIDE COATING LINE, (8) Tanks

w/ 30” x 48” Opening Approx. 36” Deep, Tanks 1, 3 &5 Have Exhaust Hoods, Overhead Hoist System w/Duff Lynx 1/4 Ton & Budgit 1 Ton Electric Hoist,Basket Size 16” x 30” x 17.5” Deep

2 – APPROX. 4000 GALLON OPEN TOP TANKS, withAgitators

insPeCTion equiPMenT1 – SCHERR TUMICO MODEL 22-2500 30" OPTICAL COMPARATOR,

S/N 904, Quadra Chek II Read Out, 10x & 20x Lens

8 – HELMEL CHECK MASTER COORDINATE MEASURING MACHINES,(1) Model 526-201 S/N 18-11, Travels X – 60”, Y – 26”, Z – 17”, (1) Model326-201 S/N 18-12, Travels X – 36”, Y – 26”, Z – 17”, (3) Model 220-125S/Ns 67-03, 67-12, 67-13, (1) Model 220-121 S/N 18-13, Travels X – 24”,Y – 20”, Z – 12”, (2) Model 112-102 S/Ns 79-57, 79-58, Travels X – 10”,Y – 12”, Z – 10”

1 – MITUTOYO MODEL PH-3500 14" OPTICAL COMPARATOR, S/N 760189, UDR-220 Read Out, 10x Lens

1 – MITUTOYO MODEL PH-350 14" OPTICAL COMPARATOR, S/N 259,20x Lens

1 – NIKON MODEL V-12A 12" OPTICAL COMPARATOR, S/N 5854,Quadra Chek Read Out, 10x, 20x & 50x Lens

1 – LECO MODEL RT-3704 HARDNESS TESTER, S/N 40055

12 – GRANITE SURFACE PLATES, S/N 760189, Ranging From 18” x 18” To48” x 72”

MArkinG MACHines1 – CLC MODEL ICON LS9000 LASER MARKING MACHINE (2002),

230 Volt

1 – CMT MODEL HANDY ANDY MARKING MACHINE, S/N AG1111

1 – MODEL MK3 T1 MARKING MACHINE, S/N 9606193 (1996), 5” 3-JawIndexing Head

1 – MODEL MK3 T8 MARKING MACHINE, S/N 9602148 (1996)

Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

TOOL ROOM • FABRICATION EQUIPMENT • BRIDGE CRANES • SHOP SUPPORT

For more information, please visit us on the web at www.hilcoind.com 7

FAbriCATion equiPMenT1 – BETENBENDER MFG. 1/4" X 6' HYDRAULIC SHEAR, S/N 01762

1 – DOALL MODEL 2612-1H3 26" VERTICAL BAND SAW, S/N 362-87194,26” Throat, 12” Cut Height, 32” x 41” Table, DBW-15 Blade Welder

1 – DREIS & KRUMP MODEL BPV-412-6 48" X 12 GA. FINGER BRAKE,S/N 324721-T

TooL rooM equiPMenT1 – MONARCH MODEL 2013 20" X 54" LATHE, S/N 49202, (36) Spindle

Speeds 12 –1500 RPM, 15” 3-Jaw Chuck, Taper Attachment, Coolant,480 Volt

1 – HARRISON MODEL 10-AA VARIABLE SPEED 10" X 20" LATHE,S/N FG7274 160457, 35-3500 RPM, 6” 3-Jaw Chuck, TaperAttachment

2 – BRIDGEPORT SERIES I 2 HP VERTICAL MILLING MACHINES,S/Ns 218268, 206039, 9” x 42” Table, Power Feed On 3-Axis, 0-4200RPM, R8 Spindle, Acu-Rite 3-Axis D.R.O.

1 – SHIGIYA MODEL GUA-32-100 12" X 39.4" UNIVERSAL CYLINDRICALGRINDER, S/N 5968, Drop Down I.D. Spindle, .3 kw Work Head w/ 7.75”4-Jaw Chuck, 3.7 kw Wheel Head, Coolant

1 – LANDIS MODEL 2R 6" X 18" ANGLE HEAD PLAIN CYLINDRICALGRINDER, S/N 859 90, Wheel Dresser, .5 HP Work Head, 10 HPWheel Head, Coolant, Barnes Drill Magnetic Fabric Filter

1 – OKAMOTO MODEL IGM-IE I.D. GRINDER, S/N 1138, 10” Swing, 8” Stroke, 6.5” 3-Jaw Chuck, Wheel Dresser, Coolant w/ MagneticSeparator

1 – OKAMOTO MODEL ACCUGAR 124 12" X 24" HYDRAULIC SUR-FACE GRINDER, S/N 8216, 12” x 24” Fine Pole Electro-MagneticChuck, Incremental Downfeed, Coolant

1 – BROWN & SHARPE MODEL 818 MICROMASTER 8" X 18"HYDRAULIC SURFACE GRINDER, S/N 523-8186-8237, 8” x 18” FinePole Electro-Magnetic Chuck, Top Mounted Wheel Dresser

1 – BLANCHARD MODEL 11 18" ROTARY SURFACE GRINDER, S/N11854, 11” Diameter Grinding Wheel, 3/8” Chuck Life, 15 HP GrindingHead w/ Rapid Traverse, Coolant, Royal F275 Mist Filter

2 – PARKER MAJESTIC 6" X 18" HAND SURFACE GRINDERS, S/Ns 3963-ZM-81, 6” x 12” Permanent Magnetic Chuck, PowerElevation, S/N 1559-SC-64, M&M #710 VI Indexer w/ 7” DiameterMagnetic Chuck

1 – START RITE MODEL H250A 10" X 10" HORIZONTAL BAND SAW

1 – DAKE MODEL 5-025 25 TON POWER HYDRAULIC H-FRAMESHOP PRESS, S/N 178961, 33” Between Housings

1 – AMROX MODEL DG12 12 TON MANUAL HYDRAULIC H-FRAMESHOP PRESS, 20” Between Housings

1 – MODEL 1200 DRILL PRESS, S/N 66-1305, 105-2000 RPM, 10” Throat, 24” x 40” Table, 220-440 Volt

oVerHeAD briDGe CrAnes2 – CLEVELAND 5 TON BRIDGE CRANES, Approx. 40' Span, 5 Ton

Hoist, Pendant Controls, Under Slung, Bottom Running with CranesRails

1 – CLEVELAND 2 TON BRIDGE CRANE, 2 Ton Hoist, Pendant Controls,Under Slung, Bottom Running with Cranes Rails

sHoP suPPorT equiPMenT1 – LINDBERG MODEL 16-R-750-A4 ATMOSPHERE GENERATOR,

S/N 25436, Max. Temp. 2000° F

1 – HARMONY MODEL M42HD VERTICAL HYDRAULIC BALER,S/N 0561, Chamber Area 42” x 20” x 36” 115 Volt

1 – PIONEER MODEL C480A PROCESS CHILLER, S/N 63603D7C11(1997), 460 Volt

1 – BIG JOE MODEL PDI-20-AZ 2000 LB. ELECTRIC STRADDLESTACKER, S/N 378261, 84” Lift, 24 Volt

1 – PRESTO MODEL PS262 2000 LB. ELECTRIC STRADDLE STACK-ER, S/N 107463, 62” Lift, Built In Charger

1 – PRESTO MODEL C-62 1000 LB. ELECTRIC STRADDLE STACKER,S/N 0384, 62” Lift, Built In Charger

1 – CINCINNATI MILACRON MODEL CRU-7 SUMP SUCKER, S/N 369,460 Volt

1 – BLAST-IT-ALL MODEL 4426-7 BLAST CABINET, S/N 87091067, D-10 Dust Collector

1 – 126-STATION INVENTORY RACK SYSTEM, (2) Rows Of 7 Bins 9 High, Bin Size 26” x 29” x 12” High, 1-Ton Coffing Lift

1 – MODEL DB-15 DEEP BED FILTER, S/N 1714

QUANTITY OF SUPPORT EQUIPMENT, Including: Self DumpingHoppers, (85) 38” x 38” x 7.5” Stackable Steel Bins, Lista Cabinets, Toolboxes, Work Benches, Shop Carts, Pallet Rack, Machine Shop Tooling,Vibratory Finishers, Double End Grinders, Belt Sanders, Dust Collectors,Welders, Power Tools, Parts Washers, Jib Cranes, Fiberglass Ladders, Etc.

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Hilco Industrial, LLC Tennessee Auctioneer & License: Tim Pfister License #6604 • TN License #5431 • IL License #444.000215

Printed in USA • SEC0485 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleAn 18% buyer's premium will be charged on all assets. Thebuyer's premium will be reduced to 16% for all onsite and HilcastWebcast buyers for payments made by means of cash, cashier’scheck, company check (with bank letter of guarantee) or wiretransfer within 48 hours of sale close. An 18% buyer's premiumwill be charged for all BidSpotter purchases with no discount forprompt payment. Everything will be sold to the highest bidder forcash, in accordance with the Auctioneer’s customary “Terms ofSale”, copies of which will be posted on the premises of the saleand subject to additional terms announced the day of sale. Allitems will be sold “as is, where-is” without any warranties,expressed or implied. Although obtained from sources deemedreliable, the Auctioneer makes no warranty or guarantee to theaccuracy of the information herein contained. Bidders are encour-aged to thoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until the dayafter the conclusion of the sale and payment is made in full.Subject to additions, deletions and prior sale. For updated infor-mation, please visit our website at www.hilcoind.com for anychanges to date, sale process, terms and conditions and list ofavailable assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made to HilcoIndustrial, LLC. Payment Options: VISA or Mastercard accepted –if invoice total is $2,000 or less; Wire Transfer; Certified Check; orCompany Check (with Bank letter of guarantee – see sample let-ter below). All sales are subject to sales tax. Purchasers claimingexemptions from taxes must provide proof satisfactory to theAuctioneer of their entitlement to claim such exemptions. Pleasesee complete terms and conditions on our website,www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will bevalid for purchases made at the Auction of Seco Tools onAugust 21, 2014.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995

www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Equipment no longer required in the continuing operations of Seco Tools,

due to the closure of the Lenoir City, TN location.