High+Voltage+Capacitor

Power Transmission & Distribution

en.chintelectric.com

T D&

High Voltage Capacitor


2012/2013

Brief IntroductionAbout CHINT T&D

New Orders

Employee

CHINT T&D is a branch company of CHINT Group Corporation. 2 Covering 900,000m , with an investment of 450 million USD.

CHINT T&D has one of the world largest power transmission & distribution equipment manufacturing centers in Shanghai.

Around 660 million USD in the year of 2011

4,300 employees

About CHINT Group

Product RangePower Transformer up to 750kVDistribution Transformer up to 35kVDry-type Transformer up to 35kVReactor up to 220kVGIS up to 252kVHV Circuit Breaker & Disconnector up to 252kVVCB 12~40.5kVMV & LV Switchgear Panel, Prifabricated Substation up to 40.5kVLV Terminal Box, Bus Bar Duct Surge Arrester & Insulator up to 500kV, CT & PT up to 220kVPower Distribution Automation SystemCable up to 36kVCapacitorTurn-key Solution

CHINT is the leading player in the Power Transmission & Distribution industry and Low-voltage electrics industry in China. Founded in 1984 by a few local entrepreneurs and currently hiring 18,000 employees worldwide.Ranked in The 2011 BCG 100 New Global Challengers (The Boston Consulting Group, 2011) CHINT Low-voltage Electrics launched IPO at the Shanghai Stock Exchange of China (2010)No.2 in China Electricity Industry's Top 10 Most Competitive Enterprises (China Machinery Industry Information Institute, 2009) No.3 in China Electricity Industry(China Machinery Industry Information Institute, 2009)No.240 in Top 500 Chinese-Companies (China Enterprise Federation, 2009).No.1 in Power T&D and the controlling devices (China Machinery Summit, 2009)Ranked in Top 100 Best Employers in China (China Entrepreneurs Summit, 2008)No.15 in Top 100 Private & Public Companies in China (Forbes, 2006)National Quality Management Award(2004) (One of top honours for manufacturing companies in China)Worldwide business operation with 2,000 sales offices, agents, distributors, and local partners in domestic Chinese market and distributors & local partners in over 105 countries. International branches or regional offices set up in USA, UAE, Germany, Russia, Brazil, Ukraine, Hong Kong of China, UK and Nigeria. CHINT stretches its business to a new frontier of solar energy by setting up a branch company specialized in the solar energy products development. The R&D center of CHINT is recognized as the National Level R&D Center run by the companies, which means the R&D level of CHINT Group has reached the leading position in the industry of China.

Sales ReferencesWith a worldwide presence in over 117 countries such as, Italy, Germany, Estonia, USA, Russia, Japan, Australia, Saudi Arabia, Poland, Ukraine, Mongolia, Kazakhstan, Pakistan, Myanmar, Indonesia, Thailand, Egypt, Yemen, Algeria, Morocco, Congo, Tanzania, Mali, Kenya, South Africa, Ghana, Nigeria, Colombia, etc, CHINT T&D provides reliable and high-qualified products and solutions to clients engaged in different businesses.

Industrial End UserBHP Billiton-AustraliaFincantieri-ItalyChevron-USAAGGREKO-UKTATA Chemical-India INVISTA-USA JFE Steel-Japan VISY Paper-Australia Sasol-South AfricaSHANGRI-LA Hotel-Phillippine De Beers-Botswana/South Africa CODELCO-Chile Barrick Gold-South Africa UML Steel-India Serebryabskiy Cement Plant-Russia Alake Aluminum Factory-Iran SIBAYAK geothermal Power Plant-Indonesia Industrial Training Center-MyanmarKingdom Iron and Steel co.-Saudi ArabiaSMCO-D.R. Congo

Engineering & ContractingEIFFAGE-France HATCH-Canada FAST JV-AustraliaDowner EDI-Australia Genser Power-Ghana

EPCNational Electricity Company-PakistanSaint Gobain-FrancePEC-YemenNEA-NepalSMCO-D.R. CongoTANESCO-TanzaniaMore >>>

ENEL-ItalyCELEC S.A-EcuadorCNEL-EcuadorICE-Costa RicaENDESA-ChileEnersis-ChileUNE-CubaFingrid-FinlandEAC-CyprusHS ORKA HF-IcelandENE-AngolaENA-ArmeniaEesti.Energia-EstoniaEVN-VietnamNEA-NepalTANESCO-TanzaniaRECO-RwandaSNEL-D.R. CongoMEPE-MyanmarKPLC-KenyaKENGEN-KenyaZESCO-ZambiaVRA-GhanaSONABEL-Burkina FasoSBEE-BeninREGIDESO-BurundiPEDEEE-SyriaTEIAS-TurkeyPEEGT-SyriaPEC-YemenQESCO-PakistanNEC-SudanPHCN-NigeriaTATA Power-IndiaWARD-Lebanon NEPCO-Jordan

Utility User

Contents

1

15

25

28

33

39

37

TBB type high-voltage shunt capacitor complete equipments

TBBF(X) type high-voltage shunt capacitor complete equipments

TBBS substation type auto-switched high-voltage shunt capacitor equipment

TBBX type high-voltage reactive on the spot compensating equipments

TBBZ pole-mounted Auto-switch High-voltage Shunt-capacitor Installation

TAL type alternating filter capacitor complete equipments

B M all film high voltage shunt capacitorFA

TBB type compensate installation of high voltage shunt capacitor

4. Type meaning and specification

1. General Description

3. Application Ambient Conditions

Rated voltage of installation

The patience voltage (RMS value) with power frequency

for 1min in primary circuit

Impulsion withstand voltage (RMS value)in primary circuit (1.25)/50s peak value

The patience voltage (RMS value) with power frequency

for 1min in secondary circuit61035

324295

6075200

222

Power frequency over-voltage The longest persist time Explain1.101.151.201.30

Long time30 min each 24 h5min1min

The most value of over-voltage isn't exceed 1.1 Un for long time.Adjust and fluctuate of system voltage.As light load, the voltage raise.As light load, the voltage raise.

Table 2

GB50227-2008

JB/T7111-1993

JB/T10577-2006

DL/T604-2009

2. Executing Standards

High-voltage shunt capacitor installations are applicable to 6-35KV electric power system to increase

the power factor, reduce circuit losses and improve voltage quality.

T BB

Connection: A-single star B-double star

Capacitance of per capacitor (kvar)

Rated capacitance (kvar)

Rated voltage (kV)

Parallel compensate

Installation

3.1 Indoor: Cabinet type, outdoor: frame type.3.2 Altitude1000m,consult us if the altitude1000m.3.3 Operating temperature: Indoor equipment: -25+45, Outdoor equipment: -40+45.3.4 No causticity gas,vapor, no inflammable gas, no blaze, no explosion risk, no frequent violent shake;

5.1 Insulate level Unit: kV Table 1

5.2 Steady state over-voltage

6. The primary connecting line of compensate installation6.1 Connecting line fashion of compensate installation: there are "Y" and "YY" connecting line fashion. The neutral point don't connected to earth. The primary connecting line drawing and primary system connecting line principle drawing for every product to see drawing 12.6.2 The configuration and setting of the compensate installation of shunt capacitor. 6.2.1 Configuration of cabinet.

5. Main Technical Parameter

P1.


The technology parameter of compensate installation of shunt capacitor.

No. Type specRated parameter

Shunt capacitorOutline dimension

(LWH)Drawing

No.Ue(kV) Ie(A) Qe(kvar)123456

TBB10-800/134-AKTBB10-900/150-AKTBB10-1000/167-AKTBB10-1200/200-AKTBB10-1500/250-AKTBB10-1600/267-AK

11/311/311/311/311/311/3

4247.2526378.784

8009001000120015001600

BFM11/ -134-1BFM11/3-150-1BFM11/3-167-1BFM11/3-200-1BFM11/3-250-1BFM11/3-267-1

3

2200 1350 2600 3

4

kV

COSVARhkA Wh Wh VARh COS?kA kV kVkV

YY Y

Y

kV

L

TVTV

LQSE QSE

10kV10kV

35kV35kV Primary system connecting line drawing of the compensate installation

The connecting line fashion of reactor is placed on neutral point side

Drawing 1

Drawing 2

Primary system connecting line drawing of the compensate installation

YYY

Y

kV kVkVkA COS?VARhWhWhkA VARh COS?

kV

kVkVkV

kV

10kV 10kV

35kV 35kV

The connecting line fashion of reactor is placed on supply side

QSE

L TV TV L

QSE

P2.


6.2.1.1 Outline drawing of the reactor is placed on neutral point side.

Drawing 3 outline of the compensate installation of shunt capacitor.

TBB - / -

kvar

KV

JB/T7111-1993

50 Hz

A

%

KV

TBB10TBB10

L

H

L1

O

I I

O

6.2.1.2 Inside configuration of the reactor is placed on neutral point side.

Drawing 4 Inside configuration drawing of the compensate installation of shunt capacitor.

CCB

B A A

H

LL1

P3.


6.2.2 Another type of series reactor is placed on neutral point side.

The technology parameter of compensate installation of shunt capacitor.



(LW H)Drawing


2TBB10-1200/200-AK2TBB10-1404/234-AK2TBB10-1500/250-AK2TBB10-1602/267-AK2TBB10-1800/300-AK2TBB10-2004/334-AK2TBB10-2400/400-AK

11/311/311/311/311/311/311/3

6373.678.48494.4105126

1200140415001602180020042400

BFM11/ -200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-267-1BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1

3

7600 1400 2600 5

6

Table 2

6.2.2.1 Outline of series reactor is placed on neutral point side.

Drawing 5 Outline and fixing dimension of the compensate installation of shunt capacitor.

L2L2L1LL

L1L2L2

H

6.2.2.2 Inside configuration drawing of series reactor is placed on neutral point side.

Drawing 6 Inside configuration of the compensate installation of shunt capacitor.

H

L2 L2 L1L L

L1 L2 L2

P4.


6.3 Hollow reactor is placed on supply side.

The technology parameter of compensate installation of shunt capacitor. Table 3



(LW H)Drawing


TBB10-4008/167-AKTBB10-4800/200-AKTBB10-5616/234-AKTBB10-6000/250-AKTBB10-6408/267-AKTBB10-7200/300-AKTBB10-8016/334-AKTBB10-9600/400-AK

11/11/311/311/311/311/311/311/3

3 210252295315336378420504

40084800561660006408720080169600

BFM11/ -167-1BFM11/3-200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-267-1BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1

3

5800 1600 2600 7

8

6.3.1 Outline and fixing of the compensate installation of shunt capacitor (using dry type hollow reactor).Drawing 7 Outline of the compensate installation of shunt capacitor (reactor is placed on supply side).

RD GN YE HAU

KV

TBB TBB TBBTBBTBB

H

LL2L2L2L1

6.3.2 Inside configuration drawing of series reactor is placed on supply side.

Drawing 8 Inside configuration of the compensate installation of shunt capacitor (reactor is placed on supply side).

L1 L2 L2 L2L

H

P5.


6.4 Another type of series reactor is placed on supply side.

The technology parameter of compensate installation of shunt capacitor. Table 4



(LW H)Drawing


TBB10-2400/100-AKTBB10-3000/125-AKTBB10-3216/134-AKTBB10-3600/150-AKTBB10-4008/167-AKTBB10-4800/200-AK

11/11/311/311/311/311/3

3 126157.4168.8188.9210.3252

240030003216360040084800

BFM11/ -100-1BFM11/3-125-1BFM11/3-134-1BFM11/3-150-1BFM11/3-167-1BFM11/3-200-1

3

5200 1200 2600 9

10

6.4.1 Another type of series reactor is placed on front side.Drawing 9 Outline and fixing dimension of the compensate installation of shunt capacitor (reactor is placed on supply side).

TBB10 TBB10 TBB10 TBB10 TBB10

KV

L2L2L1

H

L2L

O

I I

O O

I I

O O

I

6.4.2 Another inside configuration of series reactor is placed on supply side.

Drawing 10 Inside configuration drawing of the compensate installation of shunt capacitor (reactor is placed on supply side).

L2L2

H

LL2L1

P6.


6.5 The frame type of compensate installation of shunt capacitor.

6.5.1 The technology parameter of installation



(LW H)Drawing


TBB10-2400/200-AKWTBB10-3000/200-AKWTBB10-4500/300-AKWTBB10-4800/400-AKWTBB10-6000/400-AKWTBB10-7500/500-AKWTBB10-9000/334-AKWTBB10-21600/450-BLWTBB10-2000+2000-AKWTBB10-3000+3000-AKWTBB10-3600+3600-AKWTBB10-4800+4800-AKWTBB10-2100+4200-AKWTBB10-2400+4800-AKWTBB10-4800+9600-AKWTBB35-4000/334-ACWTBB35-6000/500-ACWTBB35-8000/334-ACWTBB35-9000/500-ACWTBB35-9600/400-ACWTBB35-12000/500-ACWTBB66-10020/167AQWTBB66-15000/250-AQWTBB66-18000/300-AQWTBB66-20040/334-AQWTBB66-36000/500-AQWTBB110-12000/167-AQWTBB110-28000/195-AQW

11/11/311/311/311/311/311/311/311/311/311/311/311/311/311/31121121121121121122022022022022025.9125.912

3 1261572362523153934721134105+105157+157189+189252+252110+220126+252252+504609112013614518183.512515016730056132

24003000450048006000750090002160040006000720096006300720014400400060008000900096001200010020150001800020040360001200028000

BFM11/3-200-1WBFM11/3-200-1WBFM11/3-300-1WBFM11/3-400-1WBFM11/3-400-1WBFM11/3-500-1WBFM11/3-334-1WBFM11/3-450-1WBFM11/3-334-1WBFM11/3-334-1WBFM11/3-300-1WBFM11/3-400-1WBFM11/3-350-1WBFM11/3-400-1WBFM11/3-400-1WBFM11-334-1WBFM11-500-1WBFM11-334-1WBFM11-500-1WBFM11-400-1WBFM11-500-1WBFM20-167-1WBFM20-250-1WBFM20-300-1WBFM20-334-1WBFM20-500-1WBFM5.9-167-1WBFM5.9-195-1W

540030003920620030003920620030003920540030003920620030003920680036003920700036003920760070003300660048004300760048004300780048004300780048004300780048004300800050004300900060004300600070003700660072003700600070003700660072003700900073003700600072003700800080004000800080004000800080004000800080004000100001000040002100013000600021000180006000

11

12

13

14

15

16

17

Table 5

P7.


6.5.2 Outline configuration of the installation

Drawing 11

Primary principle drawing of the installation

QSE L

TV

CFUFV10kV

W

B

CCC C

CB

CC

BB

CC

B

L

H

P8.


Drawing 12


TAQSE L

CFV

10kV

H

L

C

B

A

W

P9.


Drawing 13

L

TV

C

FU

FV

Primary connecting line principle drawing of the installation

10kV

FV

FU

C

TV

L

QSE

QG

QSE

C1

C2C2

C1 C1

C2 B2

B1

B2

B1C1

C2

L

H

W

P10.


Drawing 14

QSE

L

TV

C

FU

FV

Primary connecting line principle drawing of the installation

10kV

FV

FU

C

TV

L

QSE

QG

C2 C2 C2C2C2

C1C1C1

C2

C1 B1 B1

B2B2

B2

L

H

W

P11.


Drawing 15

35kV

FV

C

TV

L

QSE

CTo frame


A

X

A

A1

B1

B

Y

Z

C

C1

B

C C

C

C

WL

H

P12.


Drawing 16

TA

FUC

CFUFU

C


CFU

L

66kV

FV

QSE

C

B

A

H

W

L

P13.


7. The notice of user subscribe for goods7.1 The subscribe for goods by user want to write about type, spec, quantity and high order harmonic condition in network,and configure demand for discharge wingding,series reactor and shunt capacitor.7.2 User must provide fashion of primary connecting line and secondary protecting, and room plane disposal and dissect drawing(Up enter line or below enter line;left or right enter line;use cable or busbar).7.3 The short circuit discharge capability Sd of compensate installation.7.4 The altitude, temperature and air condition.7.5 The time of deliver for goods and fashion of transport.7.6 If there is special demand, deliver a letter to consult, please.

Drawing 17

TA

CTA110kV FV LQSE QF C

To frame


QSE

L

H

A

CC

BB

AA

W

P14.


( )TBBF X type High-voltage Shunt Capacitor Installation1. General DescriptionTBBF type high-voltage shunt capacitor installations are usually produced in forms of cabinet or frame. The equipments use vacuum contactor or vacuum breaker & reactive voltage auto-control equipment to control the capacitor bank, in this way, the capacitor bank will be auto-switched. The equipments are produced in purpose of increasing the power factor, reducing circuit losses and improving voltage quality.According to the reactive gross which should be compensated, the equipment could be used as one whole group or some certain number of groups, with reasonable control & protect way, can easily realize auto-switched of the capacitor bank.

2. Executing Standards GB50227-2008 JB/T7111-1993 JB/T10577-2006 DL/T604-2009

3. Application Ambient Conditions

T BB F K: open delta protection L: unbalance current protection Connection: A-single star B-double star Capacitance of per capacitor (kvar) Rated capacitance (kvar) Rated voltage (kV) Auto-switched in groups Parallel compensate Installation

3.1 Indoor: Cabinet type, outdoor: frame type.3.2 Altitude1000m,consult us if the altitude1000m.3.3 Operating temperature: -25+45.3.4 Relative humidity: daily mean95%, monthly mean90%.3.5 No causticity gasvapor, no inflammable gas, no blaze, no explosion risk, no frequent violent shake.

4. Type Meaning and Specification

Based on TBBF, we could make it in a preassemble chamber, which is similar to TBBF, and will excellently be suitable for outdoor use. We call the product TBBFX type.

TBBF

TBBFX

P15.


5. Main Technology Parameter5.1 TBBF

Device typeRated voltageRated currentRated capabilityRated frequency4s hot stabilization current(availability value)KA.Act stabilization current(peak value)KA.Type of capacitor unitMedium of capacitor unit

Protect fashionDevice typeConnect line fashion

Insulate level in secondarySurface deal, color protect grand(cabinet type)

Reactance ratio of series reactor percent for collocate whole set.Tolerance of capacitorMost ratio of 3 phasesAllow tolerance of inductanceAverage tolerance of 3 phase inductanceDischarge capability of fuse

TBBF10-/ -AK(W)10kVAkvar50Hz202531.5506380BFM11/3--1(W)

XK= %

TBBF6-/ -AK(W)6 kVAkvar50Hz

BFM6.6/3--1(W)All film medium of M/DBT

XK= %0+5%1.020+5%2%12kJ

TBBF35-/ -AKW35 kVAkvar

BFM11/3--1(W)

XK= %

50Hz

Open delta voltage protect,Neutral imbalance current protect or owe-voltage, owe-current, and over-current protectingCabinet typeSingle or double star typebetween phases32kV,phase to earth32kV(Test value on altitude 1000m)60kV(Test value on altitude 1000m)

Cabinet type Frame type

1 min patience voltage in power frequency (RMS value)

Impact patience voltage to earth



between phases42kV,phase to earth42kV between phases95kV,phase to earth95kV

75kV(Test value on altitude 1000m)


51kV(Test value on altitude 1000m)75kV(Test value on altitude 1000m)2.0kVSpray lacquer, Chint B or other Spray lacquer, Chint B or other Hot plating or spray lacquer, Chint B IP20

( )Test value on altitude 1000m ( )Test value on altitude 1000m

IP20

2.0kV 2.0kV

Remark: rated insulate level should be corrected according to altitude high.Performance parameter

Insulate

level of

capacitor

Insulate

level of the

installation

P16.


Primary connect line fashion of compensate installation: It is as "Y" fashion and neutral point isn't to earth. To see primary connect drawing 1.

Drawing1 The primary system drawing of TBBF compensate installation.

kV kVkV

YY

kV kVkVkA COS?VARhWh

YY

WhkA VARh COS?

kV

QSE

TA

1TV1C

1L

1FU

1F2F

2FU

2L

2C 2TV

TA

3FU

3L

3C 3TV

TA

3F1kM2kM3kM

QSE

1kM 2kM 3kM1F

TA

1FU

1L

1C 1TV

TA

2F

2TV2C

2L

2FU

3F

TA

3TV3C

3L

3FU

35kV

10kV

35kV

Device typeRated voltage

TBBFX10/AK(W)10 kVA50Hzkvar202531.5506380BFM/ --1(W)3

XK= %0+5%1.020+5%2%12kJ

6 kVA50Hzkvar202531.5506380BFM/3--1(W)

TBBFX6/AK(W)

4s hot stabilization current(availability value)KA.Act stabilization current(peak value)KA.

Reactive ratio of series reactor percent for collocate whole set.

Protect fashionDevice typeConnect line fashion

Insulate level of secondary circuitSurface deal, color protect grand(chamber type)





Tolerance of capacitorMost ratio of 3 phasesAllow tolerance of inductance

Discharge capability of fuse

Medium of capacitor unit All film medium of M/DBT

Open delta voltage protect,Neutral imbalance current protect or low-voltage, low-current, and over-current protectchamber typeSingle or double star typebetween phases 42kV ,phase to earth42kV(Test value on altitude 1000m)75kV(Test value on altitude 1000m)

75kV(Test value on altitude 1000m)2.0kV

IP36 IP36Spray lacquer, Chint B or other Spray lacquer, Chint B or other

2.0kV





between phases phase to earth(Test value on altitude 1000m)

32kV , 32kV

chamber typeSingle or double star type

All film medium of M/DBTType of capacitor unit

XK= %0+5%1.020+5%2%12kJ

Rated currentRated capabilityRated frequency

Performance parameter

Insulate level of capacitor

Average tolerance of 3 phase inductance

Insulate level of the installation

5.2 TBBFX

6. Connect line fashion of compensate installation

P17.


7.1 TBBF

7.1.1.1. Technology parameter table of compensate installation.



(LW H)Ue(kV) Ie(A) Qe(kvar)123456789

TBBF10-2400/200-AKTBBF10-2800/234-AKTBBF10-3000/250-AKTBBF10-3200/267-AKTBBF10-3600/300-AKTBBF10-4000/334-AKTBBF10-4800/400-AKTBBF10-6000/400-AKTBBF10-7200/400-AK

11/11/311/311/311/311/311/311/311/3

3 126147157.5168189210252315378

240028003000320036004000480060007200

BFM11/ -200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-267-1BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1BFM11/3-400-1BFM11/3-400-1

3 4800 1600 2600480016002600480016002600480016002600480016002600480016002600480016002600580016002600680016002600

Table 1

7.1.1.2 RVT outline of control fashion of power factorDrawing2 Outline of compensate installation of shunt capacitor (RVT control fashion)

AA A

TBBF10

AA A

TBBF10TBBF10 TBBF10 TBBF10

KV

AA A

TBBF10

AA AAA A

AA A

LL1

H

L2

7. Outline and fixing dimension

7.1.1.3 Inside configuration drawing of control fashion of RVT power factor.

Drawing3 Inside configuration drawing of compensate installation of shunt capacitor (RVT control fashion)

AA A

TBBF10 TBBF10

AA A

kVAA A

TBBF10 TBBF10

AA A

TBBF10

AA A

TBBF10

AA A

WL

L2

H

L1

P18.


7.1.2 WZK- or one of RCBK voltage reactive control fashion

7.1.2.1 Technology parameter of compensate installation




TBBF10-2505/167-AKTBBF10-3000/200-AKTBBF10-3510/234-AKTBBF10-3750/250-AKTBBF10-4005/267-AKTBBF10-4500/300-AKTBBF10-5000/334-AKTBBF10-6000/400-AK

11/11/311/311/311/311/311/311/3

3 131.5157.5184.2196.8210.2236.2262.4317.1

25053000351037504005450050006000

BFM11/ -167-1BFM11/3-200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-267-1BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1

3

58001600 2600

Table 2

According to table 2, WZK or RCBK voltage controller is used as protect instrument in enter line cabinet

and has alarm function. GN19-12 insulate switch is placed in the cabinet. Capacitor bank is switch-

on-off with JCZ5-12 or V12 vacuum contactor which can be automatic or manual. The reactor is used

CKSC dry iron core type ,and the protecting of open delta voltage is achieved by FDG2 or FDGQ2.

The installation is also used DWZK controller in center control room which has RS232 or RS485

communication interface and realize distance automatic control.

7.1.2.2 Outline drawing of RCBK control fashion

Drawing 4 Outline and fixing dimension of compensate installation of shunt capacitor by grouping in cabinet type

AA A

TBBF10

SB2SB1

HR HG HAU

SRSR

HAUHGHR

SB1 SB2SB2SB1

HR HG HAU

SRSB2SB1

HR HG HAU

SR

AA AAA AkV

TBBF10 TBBF10 TBBF10 TBBF10

SR

AA A

HAUHGHR

SB1 SB2

TBBF10

AA A

LA

H

800

O

II

OO

II

OO

I I

O

P19.


7.1.2.3 Inside configuration drawing in RCBK control fashion.

Drawing 5 Inside configuration drawing of compensate installation of shunt capacitor by grouping in cabinet type

L800 A

H

7.1

7.1.3.1 Outline drawing

.3 The secondary fashion of WZK- type or RCBK voltage-reactive control.

Drawing 6 The combination between fixation group and adjust group

75

HRHGHY

TBB6

kV AA A

HY HG HR

TBB6

64

AA A

SB2SB1

HR HG HAU

SR

TBBF6TBBF6TBBF6TBBF6

3

SR

HAUHGHR

SB1 SB2

AA Akv

kvar

KV

JB/T7111-1993

50 Hz

A

%

TBBF6

SR

HAUHGHR

SB1 SB2

AA AAA A

21

SB2SB1

HR HG HAU

SR

H

LL2 L1 L2

I

OO

II

O

I

O O

I

O

I I

O

7.1.3.2 Inside configuration drawing.

Drawing 7 The configuration of fixation group and adjust group

L2L2 L1

L

H

P20.


From drawing 6 and 7 can be known, there are a fixation group and 4 capacitor bank which is switch-

on-off. RCBK voltage controller can protect the 4 bank. the controller can run 2 segment busbar which

there are 8 capacitor bank, and can automatic or manual.

7.1.4 Grouping compensate installation for frame type.

7.1.4.1 Technology parameter of the installation. Table 3




TBBF35-2400+4800-AKWTBBF35-3600+7200-AKWTBBF35-4000+8000-AKWTBBF35-4800+9600-AKWTBBF35-6000+12000-AKWTBBF35-12000+12000-AK

112112112112112112

109162182218273364

72001080012000144001800024000

BAM11-400-1WBAM11-300-1WBAM11-334-1WBAM11-400-1WBAM11-334-1WBAM11-500-1W

10000 6000 370014000600037001400060003700160008000370021000700037001100090003700

According to table 3,DWZK voltage control cabinet is placed in center control room, which is fixed

RS-232 or RS-285 communication interface to realize distance control. enter line switch is GW4-35

or GW5-35,and capacitor bank is used SF6 breaker, and series reactor is used CKSKL dry hollow

core, and discharge wingding is used FBGEC, to realize difference voltage protecting. The outline

configuration is at drawing 8.

7.1.4.2 Outline configuration of installation.

Drawing 8 The drawing of 35kv cabinet type compensate installation by grouping

C

A

C1

C

Z

Y

B

B1

A1

A

X

B

A

C

B

C1

C

Z

Y

B

B1

A1

A

X

C

C

C

C

C

C

L2L1 L3

WH

L

P21.


7.2 TBBFX

7.2.1 Technology parameter of compensate installation Table 1




TBBFX10-3000/167-AKTBBFX10-3600/200-AKTBBFX10-4200/234-AKTBBFX10-4500/250-AKTBBFX10-4800/267-AKTBBFX10-5400/300-AKTBBFX10-6000/334-AKTBBFX10-7200/400-AK

11/11/311/311/311/311/311/311/3

3 157.8189.0221.1236.2252.3283.4315.6377.9

30063600421245004806540060127200

BFM11/ -167-1BFM11/3-200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-2671BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1

3

6450 2800 3320

According to table 1,enter line cabinet is used as KY28-12 the middle install type switch cabinet.

Main switch is ZN63-12/630-25 (VS1) type breaker, and controller is RVT type which is placed in the

cabinet. Capacitor bank is used for JCZ5-12 vacuum contactor to see drawing 3 and 4.

7.2.2 Outline drawing of chamber type configuration

H

L W

Drawing 2 Outline of chamber type compensate installation of shunt capacitor

7.2.3 Inside configuration drawing of chamber type installation

One of inside configuration of compensate installation of chamber type shunt capacitor.

KYN-12 High voltage switch cabinet

W

TBBF10 TBBF10 TBBF10

L

H

AA AkVkVkVkV kV kV AA A kV kV kV AA A

Drawing 3

P22.


The secondary mode of chamber type compensate installation of shunt capacitor.

TBBF high voltage capacitor bank

W

TBBF10 TBBF10 TBBF10

L

H

Drawing 4

7.2.4 The disposal drawing of cabinet (another mode of chamber type configuration)

7.2.4.1 Technology parameter compensate installation Table 2




TBBFX10-1500/167-AKTBBFX10-1800/200-AKTBBFX10-2100/234-AKTBBFX10-2250/250-AKTBBFX10-2400/267-AKTBBFX10-2700/300-AKTBBFX10-3000/334-AKTBBFX10-3600/400-AK

11/11/311/311/311/311/311/311/3

3 78.994.5110.5118.1126.1141.7157.8189.0

15031800210622502403270030063600

BFM11/ -167-1BFM11/3-200-1BFM11/3-234-1BFM11/3-250-1BFM11/3-2671BFM11/3-300-1BFM11/3-334-1BFM11/3-400-1

3

4420 2800 3320

According to table 2,GN19-12 switch is used in enter cabinet, and VQC controller is also placed in

the cabinet. BSF02-12/630-25 magnetism-forever type vacuum breaker is used to switch on-off to

capacitor bank which can automatic or manual. To see drawing 5 and 6.

7.2.4.2 Inside configuration drawing of chamber type

The third mode inside configuration drawing of chamber type compensate installation of shunt capacitor

TBBF enter line and switch cabinet

W

DWZK-

kV

2BDS1BDS

SR

HAUHGHR

A AA

A AA

HR HG HAU

SRSR

HAUHGHR

A AA

H

L

I

O O

I I

O

Drawing 5

P23.


The fourth mode inside configuration drawing of chambertype compensate installation of shunt capacitor.

TBBF high voltage capacitor bank

W

4 3 2 1

L

H

Drawing 6

P24.


TBBS Substation type Auto-switched High-voltage Shunt Capacitor Installation

TBBS substation type auto-switched high-voltage shunt capacitor installation is usually installed

besides 10kV or 6kV system of the substation. The equipment can effectively increase the power

factor, reduce circuit losses, improve voltage quality and compensate reactive power.

The equipment is divided to several capacitor banks, according to the load of system, with auto-

switching of SF6 switch & controlling of micro-controller, we can realize auto compensating of the

reactive power. Meanwhile, some protection, such as open-delta unbalance voltage, single capacitor

error, short circuit, over current, over voltage, under voltage etc, are set up to make system stable

and reliable.

4. Type meaning and specification


TBB S - / -AKW Single star connection, open delta protection

Outdoor installation

Capacitance of per bank (kvar)

Rated capacitance of installation (kvar)

Rated voltage (kV)

Substation type

Shunt capacitor installation

2. Executing Standards GB50227-2008

JB/T7111-1993

DL/T604-2009

3. Application Ambient Conditions3.1 temperature range:-4045.

3.2 altitude2000m.

3.3 sunlight: extent(max)0.1W/cm2.

3.4 wind speed: 35m/s.

3.5 earthquake: 8 degree.

3.6 No causticity gas, vapor, no inflammable gas, no blaze, no explosion risk, no frequent violent shake.

(Consult us if the environment condition is special.)

5. Main Technical Parameters5.1 rated voltage: 6KV or 10kv;

5.2 rated frequency: 50Hz;

5.3 equipment capacitance (max): 20000kvar;

5.4 single bank capacitance (max): 3000kvar;

5.5 rated reactance ratio: selected from 0.1%~1%, 4.5%~6%, 12%~13%.

P25.


6. Primary principle drawing 0 1 2 N

Insulate switch

Arrester

Discharge coil

Load switchCurrent transformer

Capability1

1

31

3

Kvar Kvar

3

13

1

2( )switch inside 2( )switch inside 2( )switch inside

Kvar

3

13

1

Name Enter line 2#capacitor bank1#capacitor bank N#capacitor bank

Main organ

Main circuit draw

ing

Remark: The primary principle drawing is belong to a model of project and manufacturer can change from user demand.

Rated voltage of the installation

The patience voltage in frequency for 1min in

primary circuit (RMS value)

The impact patience voltage[(1.25)/50s peak value)

in primary circuit

The patience voltage in frequency for 1min in

secondary circuit (RMS value)

610

3242

6075

2

5.7 Steady state over-voltage.

5.6 Insulate level

Over-voltage in power frequency Most persist time Explain1.101.151.201.30


The most value of over-voltage isn't exceed 1.1 Un for long time.

When light load, the voltage raise.

Adjust and fluctuate of system voltage.

According to single unit to deploy

According to grouping capacitance or demand user.Series reactor

Fuse

Shunt capacitor

P26.


7. Fixing drawing The envisage drawing of installation

Fixing drawing of enter line

1800w

300

1800

2700

Discharge coil

Reactor

Net gate of enclosure

Support insulator

Insulate switch

Control box

Load switch

Arrester

Capacitor

Fuse

P27.


TBBX type High-voltage Local Reactive Compensating Installation

With rated voltage 6~10kV, rated frequency 50Hz, which are widely used in 6~10kV three-phase alternating motor to carry out reactive compensating on the spot. So as to reduce the electric energy loss, increase the quality of network voltage, improve the starting ability of electromotor.The biggest feature of the equipment is that the capacitor bank will put in while the motor start, and resect while stop. It's a new energy saving product with great effect, excel in centralized compensating.

TBBX type high-voltage local reactive compensating installations are cabinet type indoor installed.



GB 50227-2008

JB/T 10557-2006

DL/T 604-2009

2. Executing Standards

TBBX 3N Common type With control supply time-delay switched-on With reactor With reactor, distant control With load switch Indoor, three-phase Rated capacitance (kvar) Rated voltagekV Shunt capacitor installation

3. Application Ambient Conditions3.1 Altitude1000m.

3.2 Indoor use only.

3.3 Temperature range:-4055.


Do not expose it in powerful electric field & magnetic field;

3.5 Relative humidity: daily mean95%, monthly mean90%;

P28.


5. Main Technical Parameters

No.

No.

Type

Type

Rated voltage

(kV)

Rated voltage

(kV)

Rated capability of capacitor bank (kvar)

Rated capability of capacitor bank (kvar)

Rated current of capacitor

bank (A)

Rated current of capacitor

bank (A)

Protect fashion

Protect fashion

Type of shunt capacitor

Type of shunt capacitor

12345678910

The parameter table of 6kV capacitor Table 1

TBBX6-90-3NTBBX6-120-3NTBBX6-150-3NTBBX6-180-3NTBBX6-210-3NTBBX6-240-3NTBBX6-300-3NTBBX6-360-3NTBBX6-450-3NTBBX6-600-3N

6666666666

90120150180210240300360450600

8.2511.013.7516.519.2522.027.532.041.2455.0

The fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitor

The fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitorThe fuse protect of unit capacitor

BFM6.3/ 3-30-1BFM6.3/ 3-40-1BFM6.3/ 3-50-1BFM6.3/ 3-60-1BFM6.3/ 3-70-1BFM6.3/ 3-80-1BFM6.3/ 3-100-1BFM6.3/ 3-120-1BFM6.3/ 3-150-1BFM6.3/ 3-200-1

11121314151617181920

The parameter table of 10kV capacitor Table 2

TBBX10-90-3NTBBX10-120-3NTBBX10-150-3NTBBX10-180-3NTBBX10-210-3NTBBX10-240-3NTBBX10-300-3NTBBX10-360-3NTBBX10-450-3NTBBX10-600-3N

10101010101010101010

90120150180210240300360450600

4.956.68.259.911.5513.216.519.824.7433

BFM10.5/ 3-30-1BFM10.5/ 3-40-1BFM10.5/ 3-50-1BFM10.5/ 3-60-1BFM10.5/ 3-70-1BFM10.5/ 3-80-1BFM10.5/ 3-100-1BFM10.5/ 3-120-1BFM10.5/ 3-150-1BFM10.5/ 3-200-1

6. TBBX outline, primary connect line and fixing dimensionDrawing 1 TBBX(6)10--3N

AAA

TBBX

TBBX - / -3NJ

%

kvar

kv

JB/T7111-1993

50 HzA

R

1000900

2000

O

I

P2

P1

1S2

2S2

1S1

2S1

C

FU

GXN-T

F

TA

(6)10kV

P29.


TBBX 10- -500/167-3N(6) TBBX(6)10- -450/150-3NTBBX(6)10- -400/134-3N

BFM/3-100-1BFM / -134-13BFM / -150-13BFM / -167-13

TBBX(6)10--300/100-3NCapacitor collocate

Capacitor collocate

Type

Type

Drawing 2 TBBX(6)10--3N

TBBX(6)10--500/167-AKTBBX(6)10--450/150-AKTBBX(6)10--400/134-AK

BFM/3-100-1BFM/3-134-1BFM/3-150-1BFM/3-167-1

TBBX(6)10--300/100-AK

A A A

kgkV

%

A

50 Hz

JB/T7111-1993

kV

kvar

900800

2300

I

O

Tv GXN-T

TA

FUF

KM

C

(6)10kV

P30.


Capacitor collocate

Capacitor collocate

Type

Type


TBBX(6)10--300/100-3N

BFM/3-167-1BFM/3-150-1BFM/3-134-1BFM/3-100-1

TBBX(6)10--400/134-3N

TBBX(6)10--500/167-3NTBBX(6)10--450/150-3N

L

TA

F

GXN-T

FU

C

(6)10kVAAA

kgkV

%

A

50 Hz

JB/T7111-1993

kV

kvar

12001000

2300

O

I


TBBX(6)10--300/100-3N

BFM/3-167-1BFM/3-150-1BFM/3-134-1BFM/3-100-1

TBBX(6)10--400/134-3NTBBX(6)10--450/150-3NTBBX(6)10--500/167-AK

QS

KM

C

F

FU

TA

GXN-Q

TBBX - / -3NJ

%

kvar

kv

JB/T7111-1993

50 HzA

R

AAA

TBBX10

1000 1200

2300

O

I

P31.


LQF

10(6)

C

FU

TA

GX

N-Q

AAA

TBBX10

1400900

2600

I

O

2S1

1S1

2S2

1S2

P1

P2

Capacitor collocate Type


TBBX-800/267-3NTBBX-750/250-3NTBBX-700/234-3NTBBX-200/67-3N BFM/3-67-1

BFM/3-234-1BFM/3-250-1BFM/3-267-1

TBBX-900/300-3N BFM/3-300-1

P32.


TBBZ pole-mounted Auto-switch High-voltage Shunt-capacitor Installation

TBB Z - A- Default: not placed metal fittings and line "J": Placed metal fittings and line "O": The controller is placed in a control box of load switch "1": The controller is placed in a control box for specialties "1": Cold roll armor plate crust "2": Stainless steel board crust "1": Common type, control time or voltage "2": Common type, control time,voltage power factor and reactive power "3": High grade, wireless control test and adjust for close quarter "4": High grade, with communication interface for long-distance Single star connecting line Rated capacitance(kvar) Default: not placed high voltage shunt capacitor Rated voltage (kV) Up pole type The installation of shunt capacitor

TBBZ type spec ( Table 1)

TBBZ-A-110TBBZ-A-110JTBBZ-A-111TBBZ-A-111JTBBZ-A-120TBBZ-A-120JTBBZ-A-121TBBZ-A-121JTBBZ-A-210TBBZ-A-210JTBBZ-A-211TBBZ-A-211J

Control physics: time,voltage

Time,voltage,power factor, reactive power

Close quarter control ,Remote measureRemote adjust

With communication interface,"4 remote"

Cold roll steel board crust

Stainless steel board crust

The controller is placed inside switch

The controller is placed in special control box

The metal fittings and line are placed for match set

Type spec

1 General DescriptionTBBZ series pole-mounted automatic-switching high-voltage shunt-capacitor on and off device are applicable to 10kV and 6kV distribution lines to increase the power factor, reduce circuit losses and improve voltage quality.The device consists of all-film high-voltage shunt capacitor (have internal fuses and discharge resistances within), outdoor switching capacitor bank on and off specially high voltage SF6 load-switch (install CT within), power transformer PT controlling, outdoor high-voltage current transformer, zinc oxide surge arresters, drop-out fuses, reactive power compensation automatic-controller and so on. Based on circuit requirement and presetting by user, they can carry out auto-switching shunt-capacitors on and off (according to time, voltage, power factor or reactive power) to make power factor achieve prearranged value. At the same time, they have perfect protective functions against short-circuit, over-current, over-voltage, under-voltage, lacking-phase, making capacitors which still accumulate electric charge, and etc. FLW(B) outdoor AC high voltage SF6 load switches have the characteristics of long service time, no bounce at closing and no burn-back at opening. Auto-controllers have excellent ability to anti-interfere. So they can ensure that the device work reliably. The device is simple and compact in structure, convenient to be installed.Executing standards: JB/T7111-1993 , DL/T604-2009, Q/ZT273-2001.

2 Type Meaning and Specification

Table 1

P33.


B M6.3/ 3-200-1WZAF

B M6.3/ 3-150-1WZAF

B M6.3/ 3-120-1WZAF

B M6.3/ 3-100-1WZAF

B M6.3-200-3WZAF

B M6.3-100-3WZAF

B M10.5/ 3-200-1WZAF

B M10.5/ 3-150-1WZAF

B M10.5/ 3-200-1WZAF

B M10.5/ 3-150-1WZAF

B M10.5/ 3-120-1WZAF

B M10.5/ 3-100-1WZAF

B M10.5-200-3WZAF

B M10.5-100-3WZAF10.510.510.5 310.5 310.5 310.5 310.5 310.5 36.36.36.3 36.3 36.3 36.3 3

1.3In

Rated voltage(kV)

Rated utensil group rated voltage(kV)

Rated capacitance(kvar)

Rated current (A)

Capacitor warp

Allow steady state over-voltage

Allow steady state current

Shunt capacitor typeCapacitor quantityType

0~5% 1.1Un

TBBZ-A-220TBBZ-A-220JTBBZ-A-221TBBZ-A-221JTBBZ-A-310TBBZ-A-310JTBBZ-A-311TBBZ-A-311JTBBZ-A-320TBBZ-A-320JTBBZ-A-321TBBZ-A-321JTBBZ-A-410TBBZ-A-410JTBBZ-A-411TBBZ-A-411JTBBZ-A-420TBBZ-A-420JTBBZ-A-421TBBZ-A-421J

Remark: "" means what the type spec product has content in the item

11333366113333

TBBZ10-100ATBBZ10-200ATBBZ10-300ATBBZ10-360ATBBZ10-450ATBBZ10-600ATBBZ10-900ATBBZ10-1200ATBBZ6-100ATBBZ6-200ATBBZ6-300ATBBZ6-360ATBBZ6-450ATBBZ6-600A

1010101010101010666666

1002003003604506009001200100200300360450600

5.51116.519.824.73349.465.99.218.327.53341.254.9

Control physics: time,voltage

Time,voltage,power factor, reactive power

Close quarter control ,Remote measureRemote adjust

With communication interface,"4 remote"

Cold roll steel board crust

Stainless steel board crust

The controller is placed inside switch

The controller is placed in special control box

The metal fittings and line are placed for match set

Type spec

3 Using environment condition3.1 Environment air temperature3.2 Altitude : below 2000 m3.3 Wind speed 35m/s3.4 Sunlight radiate(most) is 0.1W/cm23.5 Earthquake: intensity is less than 8 degree3.6 Chemistry condition : there aren't any nocuous air and steam isnt electric and blast dustRemark : tableland type and special environment product will bargain on another fashion.

4 Main technology parameter Table 2

P34.


5.1 main electric device collocate

The type and name of the installationBAM BFM high voltage shunt capacitor FLW(B)-12 special high voltage SF6 load switch to switch on-off capacitorYBK control power supply transformer

RW10-10 fall off type fuse

YH5WS zinc oxide arrester

WZK-1 high voltage reactive compensate controllerLZKW-10 high voltage current transformer outdoor

QuantityTable 211

3

3

11

Remark

The ratio is 10000/220 in 10kV line.The ratio is 6000/220 in 6kV line.

The type is YH5WS-17/50 in 10kV line.The type is YH5WS-10/30 in 10kV line.

The product of common 1 type isn't used

5.2.2 YBK control supply transformer

Rated voltage

10/0.22kV6/0.22kV

Rated capacitance

1kVA (Transient)150VA (Transient)

1 min power frequency patience voltage

High voltage side42kVHigh voltage side25kV

Patience voltage under thunder strike

75kV60kV

The most allow warp of secondary voltage

1%Low voltage side3kVLow voltage side3kV

Rated voltage (kV)

1 min power frequency patience voltage (kV)

Rated short time patience current availability value (kA)

Rated patiencecurrent peak value(kA)

Rated short circuit by switch current (kA)

Machine life (times)

Operating supply voltage

SF6 air rated press

Control box protecting grand

Rated current(A)

12100200

42 12.5kA, 4s 31.5 30000 AC220V0.05MPa (20) IP33

Patience voltage under thunder(kV)

75 31.5

5.2.3 WZK-1 high voltage reactive compensate controller

Rated voltage

220V

Rated current

5A

Power frequency patience voltage for 1 min

Measure precision of voltage and current

0.5%

Measure precision of reactive power

0.3%

Power consume

To substation To terminal of circuitry

Fall off fuse

Control supply transformer

Arrester

High voltage shunt capacitor

Control box

Current transformer

SF6 load switch

Arrester

35

00

~500

18

00

2250

When subscribe goods, please offer hereinafter information8.1 According to item 2, please give clear indication of type and spec.8.2 There is special demand element and parameter.8.3 The ratio of current transformer.

To substationTo terminal of circuitry

Fall off fuse

Control supply transformer

SF6 load switch

Shoring insulator

High voltage shunt capacitor

Control box

Arrester 18

00

~200

~350

0Current transformerArrester

8.4 Install fashion.8.5 The spec of pole (include length and tip diameter of the pole).8.6 The name and quantity of spare part.8.7 The time of deliver the goods and transport fashion.

7 Outline and placed dimensionThere are two install fashion in 600 kvar of the installation which are double pole and single pole . The double pole fashion is used on up 600 kvar (drawing 1 and 2)

Drawing 1 double poles install fashion

Drawing 2 single pole install fashion

8 subscribe goods notice

P36.


TAL type Alternating Filter Capacitor Installation

in electric power,steel,metallurgy,chemical industry,coal mine,light industry,building materials and places where harmonic current comes out. The equipments work to absorb the harmonic current from harmonic sources, restrain harmonic, eliminate the pollution of electric harmonic. The TAL equipments operate in parallel with harmonic source, besides filtering, they can also compensate reactive power in the way of offering reactive power for system and increasing power factor.

TAL type alternating filter capacitor installations are used in 6~35kV electric system, mainly installed



3. Application Ambient Conditions3.1 Installation: indoor/outdoor.

3.2 Altitude: 1000m.

3.3 Temperature range: -40+45.

3.4 Relative humidity: monthly mean850%.

3.5 Antipollution ability: creepage distance ratio of outward insulation25mm/kV (relative to highest

system running voltage). Increase the ratio in heavy pollution area.


3.7 Biggest wind velocity: 35m/s

(consult us if the environment condition is special)

T A L - /

W: outdoor (if default: indoor)

Relay protection:

K: open delta protect;

C: voltage differential protect;

L: imbalance current protect;

Q: bridge current differential protect;

Y: imbalance voltage protect

Wiring:

A: single star B: double star

Unit capacitance (kvar)

Rated capacitance (kvar)

System voltage (kV)

Filter

AC

Installation

2. Executing Standards GB50227-2008 JB/T7111-1993 DL/T604-2009

P37.


5. Main technology parameter5.1 Insulate level

Rated voltage of the installation

The patience voltage in frequency for 1min in primary circuit (RMS value)

The impact patience voltage[(1.25)/50s peak value] in primary circuit.

The patience voltage in frequency for 1min in secondary circuit (RMS value).

61035

324295

6075200

222

UnitkV Table 1

5.2 steady state over-voltage

Over-voltage in power frequency Most persist time Explain1.101.151.201.30


The most value of over-voltage isn't exceed 1.1 Un for long time.Adjust and fluctuate of system voltage.When light load, the voltage raise.When light load, the voltage raise.

Table 2

C

C type filter

C

L

R

RL

C

High frequency passage filter

LC

L

C

Double tuneSingle tune

C

L

Drawing 1 The electric connect line drawing of every type

P38.


2. Type and Signification

1. ApplicationAll-Film High-Voltage Shunt Capacitors is suitable for using in power frequency AC power system with Rated voltage 1kV to increase power factor, improve voltage quality and reduce circuit losses.This product adopts double sided thin coarsing polypropylene film as solid dielectric, M/DBT or PEPE as liquid dielectric, and edge fold aluminum foil as plate electrode. It has advantages as less space and weight, lower losses, low temperature rise, fine self-discharge performance, long lifetime. It is available with internal or external fuses and discharge resistances in accordance with requirements.Standards: IEC60871-1 (2005), GB/T11024-2001

3.1 Rated voltage: 1~21kv ,AC.

3.2 Rated frequency: 50 Hz or 60Hz.

3.3 Rated capability: 20~500kvar.

3.4 Error of capacitance: -5%~+10%.

3.5 Tagof waste angle: 0.0003.

3.6 The highest allow over-voltage: 1.1Un.

3.7 The biggest over-current: 1.3In.

3.8 Discharge specialty: As supply stop, the voltage capacitor debase from2 Un to under 75V.

B M -- Z: TBBZ type on pole which is automatic switch on-off capacitorW: OutdoorPhase numberRated capacitancekvar Rated voltagekVAll film mediumA:DBT/PEPE F: PXEShunt capacitor

B M all film high voltage shunt capacitorFA

3. Main technology parameter

4. Environment condition4.1 BAM: -40~+45, BFM: -25~+50.

4.2 Altitude1000m.

4.3 Environment condition : No violent mechanical vibration no erode air and vapor, no electric dust.

5. Main technology parameterSingle phase capacitor data table

TypeRated voltage(kV)

No.

A B D F L h1 h H

Rated current(A)

Rated frequency(Hz)

Rated capacitance(F)

Oil weight (kg)

Fig No.

Connect line head

Weight(kg)

Dimension(mm)

BAM6.3-50-1(W)BAM6.3-100-1(W)BAM6.3-150-1(W)BAM6.3-167-1(W)BAM6.3-200-1(W)BAM6.3-250-1(W)BAM6.3-300-1(W)BAM6.3-334-1(W)BAM6.3-500-1(W)BAM6.6/3-50-1(W)BAM6.6/3-100-1(W)

6.36.36.36.36.36.36.36.36.36.6/36.6/3

7.915.923.826.531.839.747.653.079.413.126.3

5050505050505050505050

4.018.0212.0313.416.0420.0524.0626.7940.1010.9621.92

5.67.9101112151617245.78.1

1827353844536066911827

385385385385385385385385440385385

150150150173173173173173200150150

425425425425425425425425480425425

250250250250250250250250300250250

465465465465465465465465520465465

9023028028028035045052052090230

200320430410480580670730790200320

370490600580650750840900960370490

M12M12M12M12M12M16M16M16M16M12M12

11222222211

12

4

567891011

3

P39.


Continue table

Type specRated voltage(kV)

No.A B D F L h1 h H

Rated current(A)

Rated frequency(Hz)


Oil weight (kg)

DrawingConnect ine head

Weight(kg)

Outline dimension (mm)

BAM6.6/3-150-1(W)BAM6.6/3-167-1(W)BAM6.6/3-200-1(W)BAM6.6/3-250-1(W)BAM6.6/3-300-1(W)BAM6.6/3-334-1(W)BAM6.6/3-500-1(W)BAM10.5/3-50-1WBAM10.5/3-100-1WBAM10.5/3-150-1WBAM10.5/3-167-1WBAM10.5/3-200-1WBAM10.5/3-250-1WBAM10.5/3-300-1WBAM10.5/3-334-1WBAM10.5/3-500-1WBAM11/3-50-1WBAM11/3-100-1WBAM11/3-150-1WBAM11/3-167-1WBAM11/3-200-1WBAM11/3-250-1WBAM11/3-300-1WBAM11/3-334-1WBAM11/3-500-1WBAM11-50-1WBAM11-100-1WBAM11-150-1WBAM11-167-1WBAM11-200-1WBAM11-250-1WBAM11-300-1WBAM11-334-1WBAM11-500-1WBAM19-334-1WBAM20-334-1WBAM21-334-1W

6.6/36.6/36.6/36.6/36.6/36.6/36.6/310.5/310.5/310.5/310.5/310.5/310.5/310.5/310.5/310.5/311/311/311/311/311/311/311/311/311/3111111111111111111192021

39.443.852.565.678.787.7131.28.316.524.827.633.041.349.555.182.57.915.723.626.331.539.447.252.678.74.69.1013.715.218.222.827.330.445.517.616.715.9

50505050505050505050505050505050505050505050505050505050505050505050505050

32.8836.6143.8454.8165.7773.22109.614.338.6612.9914.4717.3221.6525.9828.9343.313.957.8911.8413.1815.7819.7323.6826.3639.461.322.633.954.395.266.587.898.7913.152.952.662.41

10111315161724681011121516172468101112151617246810101214161723292929

36394553616692202937404654626793202937404654626792192837394554616692959595

385385385385385385440385385385385385385385385440385385385385385385385385440385385385385385385385385440680680680

150173173173173173200150150150173173173173173200150150150173173173173173200150150150173173173173173200175175175

425425425425425425480425425425425425425425425480425425425425425425425425480425425425425425425425425480720720720

250250250250250250300250250250250250250250250300250250250250250250250250300250250250250250250250250300450450450

465465465465465465520465465465465465465465465520465465465465465465465465520465465465465465465465465520760760760

280280280350450520520902302802802803504505205209023028028028035045052052090230280280280350450520520400400400

430410480580670730790200320430410480580670730790200320430410480580670730790200320430410480580670730790530530530

600580650750840900960470590700680750850940100010604705907006807508509401000106047059070068075085094010001060850850850

M16M16M16M16M16M16M16M12M12M12M12M12M16M16M16M16M12M12M12M12M12M16M16M16M16M12M12M12M12M12M12M12M12M16M16M16M16

2222222112222222112222222112222222222

121314

16

1718192021222324252627282930313233343536373839404142434445464748

15

P40.


TypeRated voltage(kV)

No.A B D F L h1 h H

Rated current(A)

Rated frequency(Hz)


Oil weight (kg)

DrawingConnect ine head

Weight(kg)

Dimension (mm)

505050505050505050505050505050505050505050505050505050505050505050505050505050505050

3 phase capacitor data table

M12M12M12M12M12M12M16M16M12M12M12M12M12M12M12M12M16M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12

390390600600600600600640390390390600600600600600640390390390390390390600600600600640390390390390390390600600600600390600600640

116126113135173200200200116116126113135173200200200116116116116116126113135173200200116116116116116126113135173200126135200200

430430640640640640640680430430430640640640640640680430430430430430430640640640640680430430430430430430640640640640430640640680

275275250250250250250260275275275250250250250250260275275275275275275250250250250260275275275275275275250250250250275250250260

470470680680680680680720470470470680680680680680720470470470470470470680680680680720470470470470470470680680680680470680680720

150230280280280280330330100150230280280280280330330100100150170230230280280280280330100100150170230230280280280280230280280330

270400440440440440490490220270400440440440440490490220240270310380400440440440440490220240270310380400440440440440400440440490

490620610610610610660660440490620610610610610660660540560590630700720710710710710760540560590630700720710710710710720710710760

BAM6.3-50-3WBAM6.3-100-3WBAM6.3-150-3WBAM6.3-200-3WBAM6.3-250-3WBAM6.3-300-3WBAM6.3-350-3WBAM6.3-400-3WBAM6.6-30-3WBAM6.6-50-3WBAM6.6-100-3WBAM6.6-150-3WBAM6.6-200-3WBAM6.6-250-3WBAM6.6-300-3WBAM6.6-350-3WBAM6.6-400-3WBAM10.5-30-3WBAM10.5-40-3WBAM10.5-50-3WBAM10.5-60-3WBAM10.5-80-3WBAM10.5-100-3WBAM10.5-150-3WBAM10.5-200-3WBAM10.5-250-3WBAM10.5-300-3WBAM10.5-400-3WBAM11-30-3WBAM11-40-3WBAM11-50-3WBAM11-60-3WBAM11-80-3WBAM11-100-3WBAM11-150-3WBAM11-200-3WBAM11-250-3WBAM11-300-3WBAM12-100-3WBAM12-200-3WBAM12-300-3WBAM12-400-3W

6.36.36.36.36.36.36.36.36.66.66.66.66.66.66.66.66.610.510.510.510.510.510.510.510.510.510.510.51111111111111111111112121212

4.69.213.818.322.927.532.136.72.64.48.813.117.521.926.330.635.01.72.22.83.34.45.58.31113.816.522.01.62.12.63.24.25.37.910.513.115.84.89.614.419.3

4.018.0212.0316.0420.0524.0628.0732.082.193.657.3110.9614.6118.2721.9225.5829.230.8661.161.441.732.312.894.335.777.228.6611.550.791.051.321.582.12.633.955.266.587.892.214.426.638.84

223241506674828719223244506574828721222426313446536577912122242631344653657734537690

711131519222424881112152022242577889101215182023778810101215192110142124

445666664445666664444445666644444456664666

12

4

56789101112

3

1314

16

1718192021222324252627282930313233343536373839404142

15

P41.


TypeNo.A B D F L h1 h H

Rated current(A)

Rated frequency(Hz)


Oil weight (kg)

DrawingConnect line head

Weight(kg)

Dimension (mm)

50505050505050505050505050505050505050

12

4

56789101112

3

1314

1516171819

Remark:1. BFM type is same with BAM product data in this table.2. Discharge resister is usually fixed in 3 phase capacitor and single phase capacitor isn't fixed resister if there isn't the demand.3. The single capacitor Upward 150KV may be fixed fuse if there is other demand.

M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12

385385385385385385390390390390390600600600600640640640640

150150150150173173116116116126126113123123135135145173173

425425425425425425430430430430430640640640640680680680680

250250250250250250275275275275275250250250250260260260260

465465465465465465470470470470470680680680680720720720720

320370400430410480240310380400460440440440440440440440440

590640670700680750560630700720780710710710710710710710710

BAM10.5/3-100-1WZBAM10.5/3-120-1WZBAM10.5/3-134-1WZBAM10.5/3-150-1WZBAM10.5/3-167-1WZBAM10.5/3-200-1WZBAM10.5-40-3WZBAM10.5-60-3WZBAM10.5-80-3WZBAM10.5-100-3WZBAM10.5-120-3WZBAM10.5-150-3WZBAM10.5-160-3WZBAM10.5-180-3WZBAM10.5-200-3WZBAM10.5-220-3WZBAM10.5-240-3WZBAM10.5-260-3WZBAM10.5-280-3WZ

16.519.822.124.827.633.02.23.34.45.56.68.38.89.91112.113.214.315.4

8.6610.3911.6112.9914.4717.321.161.732.312.893.464.334.625.205.776.356.937.518.08

29323537404622263134384649505357606969

89910111278910111213131515162120

2222227777766666666

Shunt Capacitor for Load Switch

Drawing 1

6. Outline and fixing dimension drawing

h1h

H

F

BA

D

L

230230230280280280100170230230280280280280280280280280280

Rated voltage(kV)

10.5/310.5/310.5/310.5/310.5/310.5/310.510.510.510.510.510.510.510.510.510.510.510.510.5

P42.


Drawing 2

h1h

H

F

BA

D

L

Drawing 3

h1

h

H

F

BA

D

L

Drawing 4

h1

h

H

F

BA

D

L

F

P43.


Drawing 5

h1

h

H

F

BA

D

L

F

Drawing 6

h1

h

H

F

BA

D

L

F

Drawing 7

h1

h

H

F

BA

D

L

F

P44.


T D&

2012-016EN0326

Division Representative E-mailTel

International Business: Attributed to our reliable quality and perfect after-sales service, CHINT T&D has been relied on and entrusted with by many of our clients around the world. We will continue to supply best products and try hard to win more compliments through our best service.

For inquiries, further interests for products cooperation, partnership, international alliance,investment discussion with us, please contact the following representatives.

South Asia

Latin America

Southeast Asia(ASEAN)

Oceania

Middle East

North America

Tracy Li [email protected]

Bill Han

Xufeng Jiang

(+86) 21 6777 7777 ext.80911

(+86) 21 6777 7777 ext.80990

Selina Peng

Lucy Zou

(+86) 21 6777 7777 ext.80917

(+86) 21 6777 7777 ext.80906

[email protected]

[email protected]

Lucy Zou (+86) 21 6777 7777 ext.80906 [email protected]

Charley Liu (+86) 21 6777 7777 ext.80995 [email protected]

Selina Peng (+86) 21 6777 7777 ext.80917 [email protected]

[email protected]

[email protected]

(+86) 21 6777 7777 ext.80992

(+86) 21 6777 7777 ext.80981 [email protected] Yang

Europe

Russian-speaking countries (CIS)

Africa / French language speaking countries

Myanmar / Pakistan

Industrial End User Division

York Zhi

David Liu

Charles Xu

Yin Zhang

(+86) 21 6777 7777 ext.80930

(+86) 21 6777 7777 ext.80925

(+86) 21 6777 7777 ext.80963

(+86) 21 6777 7777 ext.80959

[email protected]

[email protected]

[email protected]

[email protected]

[email protected]

(+86) 21 6777 7777 ext.80981 [email protected] Yang

General Manager

Electric Power Components andAutomation Division

Address:

The contents and data in this catalogue are for reference only. The real orderrequirements and technical agreements shall prevail. The catalogue is subject to change without further notice. The latest edition is recommended. CHINT reserves the right of interpretation.

International Business Department855 Wenhe Road, Songjiang DistrictShanghai 201614, ChinaTel: (+86) 21 6777 7777 ext. 80952Fax: (+86) 21 6777 7999Http://en.chintelectric.com

High+Voltage+Capacitor

Documents

Transcript of High+Voltage+Capacitor