HIGH-TRO-REEL (Tension Type)100A 100A High-Tro-Reel Tro-Reel. Reduces installation time. 60A/90A...

HIGH-TRO-REEL (Tension Type)

！ Please follow the safety precautions on page 2.

Multi-Lead Indoor Use Insulated Trolleys UL3P・4P 60A UL Listed

35

A recommended power supply system for hoists and cranes. Installed using

tension applied to both ends of the unit.

Reduces installation space to one-third.

Perfect for powering hoists and cranes.

Dependable power collection during travel.

56A

100A 100A

●High-Tro-Reel

●Tro-Reel

Reduces installation time.

60A/90A High-Tro-Reel unit

Joiner body

Lock screw

Terminal screw(M6)

Crimp-onterminal

Joiner cover

Terminal plate

Conductor

Hex key wrench (for M6)

50 meter jointless installation.

Use of a multiple-lead system eliminates the need to provide space between leads as required in conventional insulated trolleys. This results in a space saving of 66% over the Tro-Reel insulated trolley.

4P and 5P types are ideal for hoists and cranes requiring multiple lead wiring (including control leads) in a confined space.

Since the collector arms maintain stable contact pressure, there is less chance for the collectors to become separated from wires due to vibration or swinging.

Processes from unpacking to on-site cutting, setup, mounting onto the hangers and tension application can all be handled with the 3P unit. Its unique configuration eliminates the need for straightening and other adjustments after installation. This reduces installation time compared to conventional insulated trolleys.

High-Tro-Reel coils are 50m long, so there is no need for joints in installations up to 50m. Using joiners can make even lines longer than 50m easy to install. With 60A and 90A units, joiners can supply power from anywhere on the line.

36

60A/90A High-Tro-Reel units (for indoor use only)

●Rating 3P, 4P, 5P; 600V; 60A, 90A●Conductor materials 60A: Steel (8㎟) + Copper (20㎟), 90A: Copper (28㎟)●Insulating sheath material Rigid PVC (heat resistance: 75℃) Orange (hazard color), Munsell 2.5YR 6/13

150A/200A High-Tro-Reel units (for indoor use and machine interior use only)

●Rating 3P, 4P; 600V; 150A, 200A●Conductor material 150A/200A: Copper (46.2㎟)●Insulating sheath materials 150A: Rigid PVC (heat resistance: 75℃) 200A: Rigid PVC (heat resistance: 95℃) Orange (hazard color), Munsell 2.5YR 6/13

56

9620 20 20 20

7620 20 20

20

14

14

14

2014

14

14

15

7620 20 20

14

5620 20

14

15

56

7620

1520 20

20 20

14

14

15

60A

150A 200A

90A

5620

14

2014

7620 20 20

14

14

9620 20 20 20

14

14

●Cross-section

●Cross-section

Cat. No. Rating

3P・600V・60A

4P・600V・60A

5P・600V・60A

Length10m30m50m10m30m50m10m30m50m

Weight (kg)10.230.550.913.841.569.117.151.385.4

DH5761DH5763DH5765DH5762DH5764DH5766DH5767DH5768DH5769

Cat. No. Rating

3P・600V・90A

4P・600V・90A

5P・600V・90A

Length10m30m50m10m30m50m10m30m50m

Weight (kg)10.631.752.814.242.671.017.953.689.3

DH5791DH5793DH5795DH5792DH5794DH5796DH5797DH5798DH5799

Cat. No. Rating

3P・600V・150A

4P・600V・150A

Length10m30m50m10m30m50m

Weight (kg)15.245.575.820.461.1

101.8

DH5751DH5753DH5755DH5752DH5754DH5756

Cat. No. Rating

3P・600V・200A

4P 600V・200A


Weight (kg)15.245.575.820.260.5

100.8

DH5731DH5733DH5735DH5732DH5734DH5736

※5P(DH5767)

※4P(DH5752)

※Available in coil form only. Contact us in case of non-standard length. ※Available in coil form only. Contact us in case of non-standard length.

※Available in coil form only. Contact us in case of non-standard length.

60A (UL Listed ) Cat. No. Rating

3P・600V・60A

4P・600V・60A


Weight (kg)10.230.550.913.841.569.1

DH5761UDH5763UDH5765UDH5762UDH5764UDH5766U

UL

※Available in coil form only. Contact us in case of non-standard length.

3P60A

4P60A

3P150A 3P200A

4P150A 4P200A

5P60A

3P90A

4P90A

5P90A

37

HIGH-TRO-REEL (Tension Type)Note: Refer to page 43 for the products with CE Mark.

UL3P・4P 60A UL Listed

57

80

20 2087

A

400

B

85205

100

65

30

40

100

202087

A B

400

85138100

145

30

40

80

202087

A

400

85126100

40

30

B

Cat. No. Type Weight(kg)

Units perbox

Units percarton

DH57032K For 3P 1.8 — 1DH57042K For 4P 2.1 — 1DH57052 For 5P 2.4 — 1


Units perbox

Units percarton



Units perbox

Units percarton


100

40

208720

B

138600

100 150

145

30A

40

80

20 2087

A

600126100 150

40

B

3057

80

20 2087

BA

205600

100 150

65

30

B90110130

A120140160

3P4P5P

B90110130

A120140160

3P4P5P

End tention insulator

Attached to both ends of the High-Tro-Reel unit to absorb expansion and contraction due to temperature fluctuations.For 60A, 90A, 150A, and 200A.

Note: Can be used with lines 100m or less in length.

Don't use them again.

After setting the High-Tro-Reel unit, the terminal, and the terminal plate in the end tension insulator. The terminal plate and the terminal where fixed bolt M6×12 was tightened with the specified torque cannot be used again.

Please in quire of store purchased when the terminal and the terminal plate are necessary.

Drawing shows a 3P end tention insulator.

Drawing shows a 3P end tention insulator.

●With feed-in terminal (Cable side-out type).For 60A, 90A, 150A and 200A.


●With feed-in terminal (Cable bottom-out type).For 60A, 90A, 150A and 200A.


●Without feed-in terminal.For 60A, 90A, 150A and 200A.


●With feed-in terminal (Cable side-out type) ●With feed-in terminal (Cable bottom-out type) ●Without feed-in terminal







End tension insulator for lateral movement

Tension insulator for use in short-distance line internal wiring such as in cranes. Since the end tension insulator comes equipped with inward-facing springs for tension application, the High-Tro-Reel provides the most effective use of factory space.

For installation procedures, please refer to the specialized installation manual.

Don't use them again.

After setting the High-Tro-Reel unit, the terminal, and the terminal plate in the end tension insulator. The terminal plate and the terminal where fixed bolt M6×12 was tightened with the specified torque cannot be used again.

Please in quire of store purchased when the terminal and the terminal plate are necessary.

※3P(DH57032K)

※3P(DH57033K) ※3P(DH57035K) ※3P(DH57133K)

※3P(DH57034K) ※3P(DH57132K)

UL UL ULUL UL UL


Units perbox

Units percarton



Units perbox

Units percarton



Units perbox

Units percarton


●With feed-in terminal (Cable side-out type) ●With feed-in terminal (Cable bottom-out type) ●Without feed-in terminal

UL UL ULUL UL UL

38

Unit:mm

Center feed-in joiner

56 62

2020

8317131015 345

138

Joiner

Used to connect High-Tro-Reel units. Can also supply power from anywhere on the line (60A and 90A types).

Used to feed power from anywhere on the line and connect the High-Tro-Reel units (150A and 200A types).For 150A and 200A.

120

A

46

20 20

B

●With feed-in terminalFor 60A and 90A

●Without feed-in terminalFor 150A and 200A

Drawing shows a 3P joiner.

Drawing shows a 3P center feed-in joiner.

※4P(DH57271)

It mounts main units on the structural materials.It can be used for non-tension type, too.For 60A, 90A, 150A and 200A.

Drawing shows 3P and 5P hangers.3P and 4P types are not equipped with a φ 6.5mm hole.

11.5

A

B

4025

25

For 3P and 4P For 5P

※5P (DH5775K2)

※4P(DH5727K1)※4P(DH5724K2)

A B6282

102

7090

110

3P4P5P

Cat. No. Type Rating Weight(kg)

Units perbox

Units percarton

For 3P, 60A/90AFor 4P, 60A/90AFor 5P, 60A/90A

For 3P, 150A/200AFor 4P, 150A/200A

3P・600V・90A4P・600V・90A5P・600V・90A

3P・600V・200A4P・600V・200A

0.180.310.370.200.26

11111

2010102010

DH5723K DH5724K2 DH5725 DH5726 DH5727K1

Cat. No. Type

For 3PFor 4PFor 5P

Weight(kg)0.060.070.08

Units perbox201010

Units percarton

1005050

DH5773K2DH5774K2DH5775K2

Cat. No. Type Rating

For 3P, 150A/200AFor 4P, 150A/200A

3P・600V・200A4P・600V・200A

Weight(kg)1.92.2

Units perbox——

Units percarton

11

DH57261DH57271

A B6989

5676

3P4P

ULUL

Hanger UL Listed UL

60

4025

25

13

96

109

39

HIGH-TRO-REEL(Tension Type)

Cat. No. Weight(kg)

Units perbox

Units percarton

DH5249K 0.13 1 24

Cat. No. Rating Weight(kg)

Units perbox

Units percarton

Collector arm

Attached to the moving equipment and used to supply power from the High-Tro-Reel unit to the equipment.

●Single type

0.670.981.080.811.161.321.061.41

3P・600V・30A4P・600V・30A5P・600V・30A3P・600V・60A4P・600V・60A5P・600V・60A3P・600V・100A4P・600V・100A

————————

11111111

DH5743K3DH5744K3DH5745K2DH5746K2DH5747K2DH5748K2DH5741K2DH5742K2

※4P(DH5744K3)

A

7

270

72 46

90±

20 4823

3.5-5S

Collector arms can be linked together and used in tandem configuration when it is critical that the collectors are not separated from the wires.

※Drawing shows 4P collector arm.

557095

3.5-5S8-614-6

30A60A

100A

A Crimp-on terminal

Cat. No. Rating Units perbox

Units percarton

Collector (replacement parts)

The number of collectors in a set conforms to the number of poles. Replace collectors when they wear down to the replacement indication line (approx. 5,000km).

BA

500

267

5

6

Replacement line

3P・600V・30A4P・600V・30A5P・600V・30A3P・600V・60A4P・600V・60A5P・600V・60A3P・600V・100A4P・600V・100A

11111111

3020203020202010

DH5783K1DH5784K1DH5785K1DH5786K1DH5787K1DH5788K1DH5781K2DH5782K2

A B Crimp-on terminal85

100125

3.5-5S8-614-6

557095

30A60A

100A

※3P(DH5783K1)

12848

15366

55 52

The above shows when it is installed.

Collector arm support parts for transverese

●Applicate for 30A, 60A, and 100A collector arms.●When installing a collector arm horizontally, mounted collector arm

support parts for transverse on base of the collector arm as shown.

ULUL

40

Unit:mm

HIGH-TRO-REEL(Tension Type)

HIGH-TRO-REEL (Tension Type)100A 100A High-Tro-Reel Tro-Reel. Reduces installation time. 60A/90A...

Documents

Transcript of HIGH-TRO-REEL (Tension Type)100A 100A High-Tro-Reel Tro-Reel. Reduces installation time. 60A/90A...