High-quality spindlesThe only 100% in house spindle maker with Novibra patented design

Spindlesfor all types of ring frames

Other products of Novibra

Top rollers with the MICRO SEAL

Bottom rollers for all types of ring frames

Lubrico - spindle oiler for all types of spindles

Heavy duty spindles

Spindle components (brakes, inserts, cutters, hooks,

AV locks,...)

HPS 68 unique spindle design

Revolutionary Novibra HPS design changed the classical ring

spinning and opened new prospects for spinning in speed up to

25 000 RPM. This design has become the synonym for

high-speed spindle design.

Leading position of Novibra spindles is based on patented design

of spindle insert.

Benefits of Novibra technology:

- maximum spindle speed, reliability and long time

- good running performance with low spindle vibration and low

noise level

- low energy consumption, long lubrication intervals, less

maintenance and other benefits

6,8 neck bearing

Novibra patented

spindle insert

metal spring

sleeve with oil

4,5 mm footstep

bearing with sphero

point

1st level

2nd level

HPS 68 Insert

Two level grip of upper part in the bolster – roller type neck

bearing and footstep slide bearing.

- neck bearing diameter 6,8 mm allows minimal wharve

diameter 18,5 mm

- footstep bearing consists of axial and radial part, its movable

grip enables small displacement of shaft tip and thus reduces

neck bearing load

- damping sleeve absorbs all radial forces

- rotating shaft is floating on a lubrication film that minimizes any

metal to metal contact

- special shape of shaft tip called sphero point enables ideal

contact

Novibra spindles running performance shows minimal vibrations rise

with the speed increase.

Traditional spindle design with conical shaft tip shows remarkable

vibrations starting at 13 000 RPM. The speed above 16 000 RPM is

above the range of practical use of conical tip design spindles.

NASA HPS 68 - setting new standard

Spindle for highest speeds and noise level reduction. Solution

for modern spinning mill requirements.

- double damped spindle for maximum vibration absorption

- less neck bearing forces and increased lifetime at high speeds

- less noise

- smooth running at high speeds

- most used spindle in premium spinning machine

NASA HPS 68 and standard HPS 68 have the same bearing

geometry therefore the same spindle top part may be used in either

type. Additional design features of NASA leads into incomparable

behaviour.

1st level

2nd level

6,8 neck bearing

Novibra patented

spindle insert

metal spring

sleeve with oil

4,5 mm footstep

bearing with sphero

point

second damping

system

Performance at higher speed

Novibra spindles and other components in use.

HPS 68 standard version, recommended speed range up to

20 000 RPM, however, can theoretically run up to 25 000 RPM.

L HPS 68 for coarser yarn counts and larger tubes up to about

280mm, speeds up to 16 000 RPM. Harder damping due to the

lowered and prolonged damping sleeve.

NASA HPS 68 the best performance - the lowest noise level and

vibrations, ideal for speed range 20 000 - 25 000 RPM.

Double-housing and double-elasticity Noise Absorbing System

Assembly. Can be supplied in energy saving version.

For exact spindle specification the questionnaire has to be

filled-in. See www.novibra.com

The best choice

Double housing NASA HPS 68 spindle features unique Noise

Absorbing System Assembly that ensures top performance with

minimum vibration and noise level even at speeds above

20 000 RPM.

Energy saving spindles HPS 68/3 and NASA HPS 68/3

Footstep bearing of energy saving spindles has been

energetically optimized.

Reduction of diameter from 4,5 mm to 3 mm leads to the reduction

of power consuption. Building of sufficient oil film is still ensured.

Making the best spindle better :

- proven bearing solution for spindles

- energy consumption reduction per spindle at the same spindle

speeds

- increase of the spindle speed with the same energy consumption

- through excellent design adaptable in each ringspinning machine

with autodoffer.

Power consumption comparison.

HPS 68/3 and NASA HPS 68/3 brought up reduction of foot step

bearing diameter and as a result substantial energy saving

(recommended for ring frames with autodoffer).

Spindle with conical tip

HPS 68 and NASA HPS 68

HPS 68/3 and NASA HPS 68/3

Novibra Boskovice s.r.o.

Na Kamenici 2188

68001 Boskovice

Czech Republic

Phone +420 51 652 81 89

Fax +420 51 652 81 88

sales@novibra.com

www.novibra.com

PR 00000 / © Copyright by Novibra / Subject to modification without prior notice

Novibra is a company with strong background. In conjunction

with the sister companies, Bräcker, Suessen and Graf, Novibra is

securely embedded in the network of total solution and

application expertise in yarn processing.

Bräcker www.bracker.ch

Graf www.graf.ch

Suessen www.suessen.com