HIGH-QUALITY MIGATRONIC WELDING ACCESSORIES

2

Personal safety ............................................................ Page 4

• Clothing ................................................................... Page 4

• Welding gloves ........................................................ Page 5

• Welding helmets ..................................................... Page 6

Non-optical welding helmets ................................ Page 6

Goggles ................................................................... Page 6

Optical welding helmets ......................................... Page 6

Welding helmets with fresh air system ................. Page 9

• Welding filters and magnification lenses .............. Page 11

• Shielding .................................................................. Page 12

• Welding blankets and fire blankets ...................... Page 14

Tools ............................................................................ Page 15

Fume extraction ........................................................... Page 16

Tungsten grinding ....................................................... Page 18

Pressure regulators ...................................................... 0

Parts for pressure regulators ...................................... Page 23

Starter kits, wearing parts boxes etc. ....................... Page 25

Chemicals ..................................................................... Page 26

Original Migatronic spare parts ................................. Page 27

• Multi plugs ............................................................... Page 27

• Dinse plugs .............................................................. Page 27

• Earth clamps ........................................................... Page 27

• Electrode holders ................................................... Page 27

CON

TEN

TS

We reserve the right to make changes to specifications and to make corrections in the event of a misprint.

3WELDING VALUE

HAVE YOU CHOSEN THE RIGHT ACCESSORIES?ALWAYS LOOK FOR THE MIGATRONIC BRAND

We know from experience that welders and their employers attach great importance to safety and quality, also when it comes to welding accessories.

This catalogue provides you with an overview of our range of high-quality welding accessories, designed specifically for the welding trade.

All products have been tested and approved and comply with all relevant safety regulations and standards.

For manuals and safety data sheets, please refer to migatronic.com.

Migatronic accessories provide WELDING VALUE

during the complete welding process!

4


WELDING VALUE

WELDING MATWelding mat in leather and split leather. Length 520 mm, width 330 mm.

Art. no. .......................81930010

NECK PROTECTION FOR WELDING HELMETSNeck protection designed spe-cifically for Migatronic welding helmet. Protects against weld spatter and radiation.

Art. no. .......................81930041

WELDING JACKETLightweight welding jacket in fire-resistant fabric. Designed specifically for the welding industry. Protects against grinding particles and welding spatter. Onesize.

Art. no. .......................81930043

WELDING APRON Welding apron in split leather with riveted nylon strap and click buckle. Protects against grinding particles and weld spatter. Length 900 mm, width 580 mm.

Art. no. .......................81930015

PERSONAL SAFETY

SKIRT APRON Skirt apron in split leather with riveted nylon strap and click buckle. Protects against grind-ing particles and weld spatter. Length 500 mm, width 580 mm.

Art. no. .......................81930018

WELDING SLEEVES Lightweight set of sleeves in fire resistant fabric with elastic and buttons for shoulder fixing. Protects against grinding par-ticles and weld spatter.

Art. no. .......................81930040

WELDING HOOD HEAD AND BACK OF HEADWelding hood in split leather for protection of head and back of the head during weld-ing and grinding.

Art. no. .......................81910117

WELDING HOOD Welding hood in fire-resistant fabric for protection of head, neck and shoulders against weld spatter, grinding particles and radiation.

Art. no. .......................81930042

LEGGINGS Leggings in sets of two in split leather with Velcro fastening. Protect shoes against grinding particles and weld spatter.

Art. no. .......................81930036

Clothing

Personal safety is all-important to prevent weld spatter and grinding sparks from affecting welders’ skin and clothes. Equally important are perfect fit and comfort during welding. All of Migatronic’s personal safety products carry CE qualification and materials and designs are carefully selected. Migatronic dresses you in branded clothing from top to toe.


WELDING VALUE 5

TIG WELDING GLOVES SIZE 10Soft goatskin TIG welding gloves with cuffs made of cow-split. Sewn with Kevlar thread. Inside finger seams. Extra rein-forced palm. Abrasion-resistant welding gloves with perfect fit for quality welding. Comply with health standards for chrome-6 content. Length 35 cm. Size 10.

Art. no. ........................81930070

MIG HEAVY DUTY WELDING GLOVES SIZE 10Suede MIG welding gloves sewn with Kevlar thread. Air-suspended fleece lining for increased heat resistance. Extra reinforcement for improved grip and wearing properties. Comply with health standards for chrome-6 content. Length 35 cm. Size 10.

Art. no. ........................81930072

MIG HEAVY DUTY WELDING GLOVES SIZE 11Suede MIG welding gloves sewn with Kevlar thread. Air-suspended fleece lining for increased heat resistance. Extra reinforcement for improved grip and wearing properties. Comply with health standards for chrome-6 content. Length 35 cm. Size 11.

Art. no. ........................81930073

TIG WELDING GLOVES SIZE 11Soft goatskin TIG welding gloves with cuffs made of cow-split. Sewn with Kevlar thread. Inside finger seams. Extra rein-forced palm. Abrasion-resistant welding gloves with perfect fit for quality welding. Comply with health standards for chrome-6 content. Length 35 cm. Size 11.

Art. no. ........................81930071

MIG WELDING GLOVES SIZE 11Suede MIG welding gloves. Sewn with Kevlar thread. Extra reinforcement for improved grip and wearing properties. Fleece lining and elastic cuffs for perfect fit. Comply with health standards for chrome-6 content. Length 35 cm. Size 11.

Art. no. ........................81930075

MIG WELDING GLOVES SIZE 10Suede MIG welding gloves. Sewn with Kevlar thread. Extra reinforcement for improved grip and wearing properties. Fleece lining and elastic cuffs for perfect fit. Comply with health standards for chrome-6 content. Length 35 cm. Size 10.

Art. no. ........................81930074

PERSONAL SAFETY

Welding gloves

Welders’ hands are their most important tools! Migatronic welding gloves ensure safe grip and perfect fit and reduce the risk of injury. Compliance with public health legislation concerning chrome-6 contents reduces the risk of allergic reactions.

6


WELDING VALUE

PERSONAL SAFETY

Migatronic Basic ADF

Art. no. 81910605

The Migatronic Basic ADF welding helmet, ideal for hobby, work-shop use and light industrial welding, is equipped with ADF (auto darkening) filter and certified according to EN 379, EN 175, EN 166.

Welding helmets

Migatronic does not compromise safety. Our welding helmets provide maximum protection of the welder’s eyes and face during welding to prevent workplace injuries. The helmets are designed for optimal welding comfort and optics. Our range meets all requirements, from traditional helmets to automatic types with fresh-air systems.

WELDING SHIELDSmall, lightweight PVC hand-shield. Welding glass: 51 x 108 mm. Supplied with shade 10 filter.

Art. no. ........................81910144

GRINDING SHIELDGrinding shield in clear plexi glass with pivot fittings in headgear.Art. no. ........................81910007

VISOR FOR GRINDING SHIELDSeparate visor in plexi glass for grinding shield.Art. no. ........................81910008

2 PCS SWEAT FRONTLETSSweat frontlet of imitation leather for fixing on headgear.

Art. no. ........................81910119

WELDING/GRINDING GOGGLESCombined welding/grinding goggles with round carborock glass. Fixed grinding goggles and flip-up welding glasses. Glasses can be changed as required. For ø 50 mm glasses.Art. no. ......................81912005

Non-optical welding helmets and goggles

SAFETY GOGGLESSleek, sporty style goggle. Comfortable to wear owing to soft-touch temples and light-weight construction. Full range of vision.

MIGA FLIP UP WELDING HELMETWelding helmet with Flip-up. Equipped with 60 x 110 mm passive welding filter. Supplied with shade 10 filter.

Art. no. ........................81910890

HEADGEAR FOR WELDING HELMETHeadgear for polypropylene welding helmet

Art. no. ........................81910100

Clear:Art. no. ........................81912017Amber: Art. no. ........................81912018Tinted mirror:Art. no. ........................81912019Shade 3:Art. no. ........................81912020Shade 5:Art. no. ........................81912021

Optical welding helmets

Art. no. Description

81910605 Migatronic Basic ADF

81911062 External shielding glass 90 X 110 mm

81911092 Internal shielding glass 47 X 105 mm

Technical data:

• Fully automatic filter (ADF)

• Externally variable shade DIN 9-13, open DIN 4

• Adjustable delay

• Field of view 100 x 41 mm

• Classification 1/1/1/2

• Adjustable sensitivity

• Solar with built-in battery

• Grinding function

7


WELDING VALUE

Pos. Art. no. Description

81910900 Focus ADF welding helmet

A 81910905 Headgear

B 81910906 Sweat frontlet

C 81910801 External Shielding Glass 85.9x103.6 mm

D 81910802 Internal Shielding Glass 53.7x104.8 mm

E 81910904 ADF Mounting Frame Assembly

F 81910860 Hard hat

G 81910861 Adapter for mounting of hard hat

Focus ADFArt. no. 81910900

The Focus ADF welding helmet is ideal for hobby and workshop use and light industrial welding. The helmet features a fully automatic True Colour filter and is certified according to EN379, EN175 and EN166.

Technical data:

• Fully-automatic filter (ADF)

• Externally variable shade 9-13

• Adjustable delay

• Field of view 97 x 47 mm


• Adjustable sensitivity

• Solar

• Grinding function

• Magnification lenses size 51 x 108 mm can be fitted

• Can be fitted with hard hat

Fields of application:

• MMA (electrode)

• MIG/MAG

• TIG (>10amps)

• Grinding

C

E

D

B

A

PERSONAL SAFETY

F

G

Hard hatFor protection purposes, the Migatronic optical welding helmet Focus ADF and Focus MigADCplus can be equipped with a hard hat with brakes with built-in springs to keep it in place in irrespective of welding position. The heavy-duty construction ensures long life of hard hat and adapter. If the welder stops welding, he can easily dismount the welding helmet, even with welding gloves on, and still be pro-tected by the hard hat.

8


WELDING VALUE

MigADCplus

The MigADCplus is ideal for welders in the manual and manufacturing industries where technical skills and attention to detail are a must. The MigADCplus provides optimal conditions for welders to produce high-quality welds.

New ADC* technology in the optical filter compensates angular dependence significantly. The flashes of light that welders are exposed to may cause irritation of eyes but the MigADCplus provides full protection at +/-30° visual angle as well as full protection of welders’ eye, neck and face movements.

* ADC = Angular Dependence Compensation

Technical data:

• Fully-automatic filter (ADF)

• Externally variable shades 6-8 and 9-13

• Externally adjustable delay

• Externally adjustable sensitivity

• External control knob for choosing weld/grind function

• Field of view 96 x 68.5 mm


• MigADCplus Standard approved according to EN379, EN175, EN166

• MigADCplus Air approved according to EN379, EN175, EN166, EN12941, EN14594.

Fields of application:

• MMA (electrode)

• MIG/MAG

• TIG

• Grinding

MigADCplus features:• Standard or Air model; the latter can be fitted with a fresh-air

unit

• Clear field of view from all angles reduces eye fatique and the need of adjusting functions

• Superior optics

• Aerodynamic design conducts away welding fumes

• External control knobs for adjustment of functions

• TIG mode (DIN 6-8)

• Can be fitted with frame for magnifying lenses

• Can be fitted with hard hat

• 3-year warranty

PERSONAL SAFETY

Classification: 1/1/1/1 MigADCplus has achieved the top mark classification

for optics, light diffusion, homogeneity and angular

dependence.

9


WELDING VALUE

K L

MigADCplus StandardArt. no. 81910830

Welding helmet with fully-automatic filter (ADF). Externally vari-able shades 6-8 and 9-13. Externally adjustable delay and sensitiv-ity plus weld/grind function. Perfect for demanding welding jobs in the manual and manufacturing industries. Approved according to EN379, EN175, EN166.

C A A B C

D

E

F

G H

I J

PERSONAL SAFETY

E


81910830 MigADCplus Standard

A 81910846 Bolt for headgear

B 81910845 Brake for headgear

C 81910847 Nut for headgear

D 81910848 Headgear

E 81910844 Sweat frontlet

F 81910849 Helmet shell

G 81910841 Internal shielding glass107.5 x 71.5 mm

H 81910850 Frame for magnification lenses

I 81911051819110468191104781911048

Magnification lenses +1.0Magnification lenses +1.5Magnification lenses +2.0Magnification lenses +2.5

J 81910840 ADF Grand GDS Plus

K 81910842 External shielding glass147 x 125 mm

L 81910843 Front frame

M 81910860 Hard hat

N 81910861 Adapter for mounting of hard hat

Parts for MigADCplus Standard and MigADCplus Air

M NHard hatFor protection purposes, the Migatronic optical welding helmet can be equipped with a hard hat with brakes with built-in springs to keep it in place irrespective of welding position. The heavy-duty construction ensures long life of hard hat and adapter. If the weld-er stops welding, he can easily dismount the welding helmet, even with welding gloves on, and still be protected by the hard hat.

10


WELDING VALUE


81910835 MigADCplus Air

X 81910852 Hose holder

Y 81910851 Face seal

MigADCplus AirArt. no. 81910835

Welding helmet with fully-automatic filter (ADF), featuring the same control facilities and advantages as the MigADCplus Standard. The helmet can be fitted with a fresh-air unit. The integrated air duct with dampers allows the welder to adjust the air flow. Approved according to EN379, EN175, EN166, EN12941, EN14594.


81910875 Basic Flow Control

81910309 Prefilter

81910310 Particle filter P3

81910876 Battery

81910879 Air hose

81910878 Belt

81910877 Charger


81910880 Chemical 3F Flow Control

81910324 Combination filter A2P3

81910328 A2B2E2SXP3-OZONE combination filter

81910856 Battery

81910857 Hose

81910859 Belt

81910855 Charger

X

ZZ

ZZ

Y

MigADCplus Air with Chemical 3F Flow Control and filter A2P3

Basic Flow ControlArt. no. 81910875

Motorised respiratory protection system with P3 particle filter. The unit is equipped with a micro-computer that enables a constant flow irrespective of battery size and no matter how much the filter is clogged up. The flow is adjustable from 170 to 240 l/min. Redesigned LED control panel makes all relevant details clearly visible to the welder. Approved according to EN12941/A2-TH3.

Chemical 3F Flow ControlArt. no. 81910880

New generation of motorised respiratory protection system, approved according to EN12941/TH2-TH3, EN12942/TM2-TM3 and density class IP65 for use in heavy chemical industries; designed to filter gases, vapours and particles and combinations thereof. The flow is adjustable from 120 to 235 l/min. If the flow falls to a low level or the filter is clogged up, the welder is warned by an alarm in the built-in micro-computer. The unit features a colour display and is supplied with a Li-Ion 14.4V 2.6Ah battery and a charger that charges the battery within 3 hours.

MigADCplus Air with Basic Flow Control

81910880

PERSONAL SAFETY

Basic Flow Control Chemical 3F Flow Control

8191083581910880 + 81910324

Parts for MigADCplus Air only. See other parts for MigADCplus Air page 8.

Welding helmets with fresh air system

8191087581910875 81910835

11


WELDING VALUE

Welding glass

Protection

Size mm

51 x 108Art. no.

60 x 110Art. no.

22 x 108Art. no.

64 x 101Art. no.

ø50Art. no.

DIN 4 81911089

DIN 5 81911037

DIN 6 81911038

DIN 7 81911081 81911082

DIN 8 81911001 81911060

DIN 9 81911007 81911059

DIN 10 81911005 81911058

DIN 11 81911008 81911057

DIN 12 81911006 81911056

DIN 13 81911055

Clear shielding glass

81911002 81911054 81911061 81911035

Clear plexi glass 81911045 81911053 81911003

Yellow plexi glass

81911087

Green Plexi glass 81911004

Art. no. Size mm Placement Type of helmet

81910801 85,9 x 103,6 External Focus green (second version)

81910802 53,7 x 104,8 Internal Focus green (second version)

81910585 94,3 x 114,8 External Focus black and green (first version)

81910586 53,4 x 105,7 Internal Focus black and green (first version)

81910591 47 x 103,5 Internal Protector ADF

81910106 51 x 107 Internal Protector Three, 4,5/450/451, 5/500/501, 5Exclus.

81910107 97 x 110 External Protector 4/400/401, 4,5/450/451, 5/500/501, 5TM/500TM/501TM, 5Exclus.

81910418 66 x 109 Internal Protector 5/500/501

81911062 90 x 110 External Protector 4/400/401, 5/500/501

Protection glasses for old models of optical Migatronic welding helmets

Art. no. Diopter Size mm

81911051 +1.0 51 x 108

81911046 +1.5 51 x 108

81911047 +2.0 51 x 108

81911048 +2.5 51 x 108

Magnification lenses for welding helmetsMagnification lenses that suit most optical welding helmets e.g. Focus ADF and MigADCplus and non-optical welding helmets.

PERSONAL SAFETY

Welding filters and magnification lenses

12


WELDING VALUE

Welding curtainsSeparate curtains in standard sizes. Ring holes at 22 cm spacing at the top. Plastic snap fasteners welded on the sides. Supplied with 7 metal rings.

Migatronic welding curtains are DIN approved and meet the requirements of EN 1598 and DIN 21404, part 2.

Strip curtains Design a welding cabin that suits todays requirements and redesign it tomorrow. Strip curtains with 1.0 mm thick strips are a simple and flexible solution. Large workpieces can easily be passed through the curtains, and in the case of damage it is enough to replace the damaged strip(s). Supplied in boxes of 4.

Orange:Shielding during arc welding

Bronze:Shielding during arc welding

Green (non-transparent):Shielding during arc welding

Shielding

A safe working place is a matter of common interest to both welders and their employers. Welders and others risk exposure to the harmful UV radiation as well as sparks and metal chips from welding, grinding and cutting. Migatronic’s approved shielding products reduce this risk considerably and provide optimal protection for everyone.

Dull green Non-transparent

OrangeTransparent

Bronze (Brown) Transparent

Height x width Art. no. Art. no. Art. no.

1600 x 1400 mm 81910158 81910155 819101521800 x 1400 mm 81910159 81910156 819101532000 x 1400 mm 81910160 81910157 81910154

Dull green Non-transparent

Orange Transparent

Bronze (Brown) Transparent

Height x width Qty Art. no. Art. no. Art. no.

1600 x 570 mm 4 81910163 81910166 819101692000 x 570 mm 4 81910165 81910168 81910171

PERSONAL SAFETY

Migatronic welding curtains and strip curtains protect against every kind of UV radiation up to 560 nm.

Migatronic welding curtains and strip curtains carry EN-1598CE qualification and Migatronic

quality stamp.

13


WELDING VALUE

METAL RING FOR CURTAINSMetal ring for mounting of welding curtains and strip curtains e.g. on galvanised stand.

Art. no. ........................81910210

WELDING CURTAIN GREEN INCL. STANDMobile welding curtain incl. galvanised stand. Dull-green, non-transparent. Width 2000 mm. Height 2000 mm.

Art. no. ........................81910150

WELDING CURTAIN ORANGE INCL. STANDMobile welding curtain incl. galvanised stand. Orange, transparent. Width 2000 mm. Height 2000 mm.

Art. no. ........................81910151

SEPARATE STAND FOR MOBILE WELDING CURTAINGalvanised stand for mobile welding curtain. Fits also 4 welding curtain strips size 1600 x 570 mm.

Art. no. ........................81910396

MOBILE WELDING CURTAIN ORANGEMobile, flexible welding curtain with 2 pivoting arms allows you to make either a booth or an extended curtain. The stand is supplied with 1.0 mm thick orange, non-trans-parent strips. Width: 3750 mm. Height: 2000 mm.Art. no. ........................81910395

PLASTIC HOOKS FOR SLIDING RAIL, PACKAGE OF 16Plastic hooks for mounting welding curtains and strip cur-tains in C-profile sliding rail.

Art. no. ........................81910211

SLIDING RAIL C-PROFILE Galvanised sliding rail in C-profile. Measurement: 30 x 35 x1.5 mm (max. 6 m).

Art. no. ........................81910356

PERSONAL SAFETY

MOBILE WELDING CURTAIN DULL-GREENMobile, flexible welding curtain with 2 pivot-ing arms allows you to make either a booth or an extended curtain. The stand is supplied with 1.0 mm thick dull-green, non-transparent strips. Width: 3750 mm. Height: 2000 mm.

Art. no. ........................81910394

14


WELDING VALUE

WELDING BLANKET KRONOS 2 X 1 M Universal glass tissue wel-ding blanket. Single-sided PU coating. Heat-resistant up to 550°C. Suitable for light welding and grinding.

Art. no. ........................81930060

WELDING BLANKET KRONOS 2 X 2 MUniversal glass tissue welding blanket. Single-sided PU coat-ing. Heat-resistant up to 550°C. Suitable for light welding and grinding.

Art. no. ........................81930061

WELDING BLANKET KRONOS 25 X 1 MUniversal glass tissue welding blanket. Single-sided PU coat-ing. Heat-resistant up to 550°C. Suitable for light welding and grinding.

Art. no. ........................81930062

Welding blankets and fire blankets

FIRE BLANKET 180 X 180 CMFolded and packed in a red PVC bag with snap fasteners and Velcro fastener which provides easy access to the fire blanket in case of an accident.

Art. no. ........................81930048

PERSONAL SAFETY

Build your personal welding cabin

Migatronic shielding elements allow you to design a welding cabin that suits your requirements.

3

7 1 54

6

2

4 8

Your personal welding cabin can be pieced together of:

• made-to-measure curtains

• curtains with snap fasteners

• strip curtains

* Please allow for extended delivery times.

Pos. Description Art. no.

1 Sliding rail C-profile. Dimensions: 30 x 35 x 1.5 mm (max. 6 m) 819103562 Wall fittings for C-profile 81910241*

Angle brace 81910350*Holder for C-profile 81910351*

3 Galvanized support with foot plate for C-profileHeight: 225 cm 81910353*Height: 285 cm 81910354*

4 Galvanized rail fittings for C-profile 81910357*5 Galvanized T-piece connecting C-profiles 81910352*6 Galvanized 90° bend, radius 500 mm for C-profile 81910355*7 Plastic sliding rails for C-profile (16 pcs.) 819102118 Curtain, see page 12

Max. distance between floor and curtain: 40 cm.

15


WELDING VALUE

NOZZLE TONG Ø12-15 MMNozzle and wire cutter for cleaning ø12-15 mm gas nozzles as well as quick and correct wire cutting.

Art. no. ........................81940010

GAS NOZZLE CLEANERGas nozzle cleaner with leaf springs for all types of gas nozzles. Removing weld spatter increaces life of gas nozzles.

Art. no. ........................81940012

LARGE NOZZLE TONGNozzle and wire cutter for cleaning large gas nozzles as well as quick and correct wire cutting.

Art. no. ........................81940028

MITRE MAGNET 1 X 300 KGMitre magnet for 30°, 45°, 60°, 75° and 90°. Retaining power 1 x 300 N.

Art. no. ........................81080003

CHIPPING HAMMER Chipping hammer with metal handle. Weight 415 g.

Art. no. ........................81920003

WIRE BRUSH FOR STAINLESS STEEL AND ALUMINIUMWire brush for cleaning stainless steel and aluminium workpieces.

Art. no. ........................81940020

WELDING MIRROR WITH FLEXIBLE ARMWelding mirror with flexible arm. Dimensions 70 x 80 x 1.5 mm.

Art. no. ........................81912202

MIRROR 1.0 MM (10 PCS.)Mirror for flexible arm. Dimen-sions 70 x 80 x 1.0 mm. Supplied in packages of 10.

Art. no. ........................81912204

TOOLS

Tools

A few tools make welders’ work a lot easier. Professional Migatronic tools make it easy for welders to clean, check and make the finishing touches to workpieces.

NOZZLE TONG Ø15-18 MMNozzle and wire cutter for cleaning ø15-18 mm gas nozzles as well as quick and correct wire cutting.

Art. no. ........................81940011

MITRE MAGNET 1 X 450 KGMitre magnet for 30°, 45°, 60°, 75° and 90°. Retaining power 1 x 450 N.

Art. no. ........................81080005

CLEANING NEEDLES SETCleaning needles set consisting of 1 file and 14 short cleaning needles in a metal box. Sizes from 0.4 to 2.5 mm. Use of cleaning needles increases the life of welding nozzles and cut-ting nozzles.

Art. no. ........................81970018

D75/S80 GAS IGNITERGas igniter for igniting the gas torch; flexible and with replaceable ignite flint.

Art. no. ........................81970209

IGNITE FLINT (5 PCS.)Replaceable gas ignite flint for D75/S80 gas igniter. Supplied in packages of 5.

Art. no. ........................81970210

WELDING MIRROR WITH MAG-NETIC FOOT AND FLEXIBLE ARMWelding mirror with magnetic foot and flexible arm. Dimensions 70 x 80 x 1.5 mm.

Art. no. ........................81912201

16


WELDING VALUE

FILTER FOR MIGAVENT MINIFire-resistant filter cartridge for MigaVent Mini

Art. no. ........................82031205

MOUTH PIECE 200 MM Ø50 MM200 mm slot nozzle with steel hose and magnet for mounting on 51 mm flex hose.

Art. no. ........................82031201

ADAPTER FOR HOSE 50 MM <=> 45 MMAdapter to connect a 50 mm connection to a 45 mm hose and a 45 mm connection to a 50 mm hose.

Art. no. ........................82031206

MOUTH PIECE 300 MM Ø50 MM300 mm slot nozzle with magnet for mounting on 51 mm flex hose.

Art. no. ........................82031202

MOUTH PIECE ROUND Ø50 MMConic extraction mouthpiece with steel hose and magnet for mounting on 51 mm flex hose.

Art. no. ........................82031203

MigaVent Mini *)

Portable, mobile high-vacuum filter unit for short-term weld-ing and grinding assignments where high vacuum extraction is permitted. External air-cooling of motor. Supplied with easily replaceable dust class M filter. Transports up to 209 m³ air/hour. Supplied with ø 50 mm hose connection.

Technical data:

• Noise level: 73 dB (A)

• High-vacuum dust class M filter

• 1 x 230 V

• 1200 Watt

• ø50 mm connection

• Weight: 18.7 kg

• Dimensions (L x W x H): 370 x 350 x 534 mm

Art. no. ........................82031200

*) Additional schuko plug is required

EXTRACTION HOSE Flex extraction hose for MigaVent Mini and mouthpiece in running metre. Inside diameter ø 51 mm.Art. no. ........................92570042

Flex extraction hose for MigAir and mouthpiece in running metre. Inside diameter ø 45 mm.Art. no. ........................92570041

FUME EXTRACTION

Fume extraction

Welding fume is highly hazardous to health and must be removed from the welding site and subsequently filtered in order to protect our environment. Migatronic takes pride in being as “green” as the welding machines we produce!

17


WELDING VALUE

MigaVent 2000*)

Ventilator for wall-mounting with energy-saving engine. MigaVent 2000 transports up to 1.300 m³ air/h.

Technical data:

• 3 x 400 V

• 50 Hz

• 2780 revolutions/minute

• 1.10 kW

• ø160 mm connection

Art. no. ........................82031230

*) Additional schuko plug is required

FLEXI EXTRACTION ARM 3 M3 m extraction arm with swivel link, extraction hood with damper and gas springs. Ø 160 mm hose connection.

Art. no. ........................82031231

PRESSURE GUARDPressure guard for MigaVent 2000 and Flexi extraction arm. Red warning light is lit in case of insufficient extraction.

Art. no. ........................82031233

FLEXI EXTRACTION ARM 4 M4 m extraction arm with swivel link, extraction hood with damper and gas springs. Ø 160 mm hose connection.

Art. no. ........................82031232

FUME EXTRACTION

18


WELDING VALUE

FILTER CASSETTE GREEN POINTER X2Filter cassette for collection of grinding dust in Green Pointer X2.

Art. no. ........................82036179

DIAMOND GRINDING DISC GREEN POINTER X2Diamond grinding disc for Green Pointer X2 Ø 40 mm.

Art. no. ........................82036171

ELECTRODE CLAMPS Electrode clamps for Green Pointer X2, Pro and Pro Cut

Art. no.: ø1.0 mm .......82036173Art. no.: ø1.6 mm .......82036174Art. no.: ø2.0 mm .......82036175Art. no.: ø2.4 mm .......82036176Art. no.: ø3.2 mm .......82036177Art. no.: ø4.0 mm .......82036178

ELECTRODE HOLDER GREEN POINTER X2 Electrode holder for Green Pointer X2

Art. no. ........................82036172

Green Pointer X2Handy, portable tungsten grinder for perfect and eco-friendly grinding of 1.0-4.0 mm tungsten electrodes; including exhaust with easily replaceable filter and excenter disc for triple utilisation of diamond disc. Green Pointer X2 is supplied in a transport case complete with diamond grinding disc, electrode holder and elec-trode clamps for 1.6, 2.4 and 3.2 mm electrodes.

Green Pointer X2 with schuko plugArt. no. ........................82036170

SIGHT GLASS GREEN POINTER X2Sight glass for Green Pointer X2

Art. no. ........................82036186

TABLE CONSOLE GREEN POINTER X2Solid console for fixing the Green Pointer X2 to a table during grinding.

Art. no. ........................82036185

TUNGSTEN GRINDING

Tungsten grinding

Trouble-free TIG welding requires a correctly-ground Tungsten electrode. Migatronic Tungsten grinders provide correctly-ground Tungsten electrodes for perfect TIG welding results and reduce the consumption of electrodes to a minimum for the benefit of the environment.

Migatronic also offers a wide range of high-quality tungsten electrodes and recommends our allround Super Blue™ with excellent ignition and reignition properties for improved welding quality and safety; the optimal choice for DC and AC welding in all types of material.

19


WELDING VALUE

GRINDING LIQUID CONTAINER *Container with cooling/ lubricating liquid for tungsten wet grinders Green Pointer Pro, Pro Cut, MK1, MK2. The con-tainer collects heavy metals in the grinding particles.

Art. no. ........................82036132

DIAMOND GRINDING DISC GREEN POINTER PRO/PRO CUT Diamond grinding disc for Green Pointer Pro and Pro Cut

Art. no. ........................82036210

ELECTRODE CLAMPSElectrode clamps for Green Pointer X2, Pro and Pro CutArt. no.: ø1.0 mm .......82036173Art. no.: ø1.6 mm .......82036174Art. no.: ø2.0 mm .......82036175Art. no.: ø2.4 mm .......82036176Art. no.: ø3.2 mm .......82036177Art. no.: ø4.0 mm .......82036178

ELECTRODE HOLDER GREEN POINTER PRO/PRO CUTElectrode holder for Green Pointer Pro and Pro Cut com-plete with handle and union nut.

Art. no. ........................82036208

Green Pointer ProTungsten wet grinder for grinding 0.8-4.0 mm tungsten elec-trodes, featuring eco-friendly collection of toxic dust particles. Cold wet grinding combined with high grinding speed provide at smooth surface of the tungsten electrode. Green Pointer Pro ensures correctly-ground tungsten electrodes for trouble-free TIG welding and is supplied complete with console, diamond grinding disc, grinding liquid, electrode holder and electrode clamps for 1.6, 2.4 and 3.2 mm electrodes.

Art. no. ......................82036220

GRINDING LIQUID *Special cooling/lubricating liquid in 250 ml bottles for tungsten wet grinders.

Art. no. ........................82036103

GRINDING LIQUID *Grinding liquid in 5 l cans for tungsten wet grinders.

Art. no. ........................82036125

Green Pointer Pro CutTungsten wet grinding and cutting device for perfect and eco-friendly grinding and cutting 0.8-4.0 mm tungsten electrodes. Green Pointer Pro Cut grinds the electrode tips in exact angles and lengths for TIG welding operations, including robot and orbital welding, and is supplied complete with console, diamond grinding disc, grinding liquid, electrode holder and electrode clamps for 1.6, 2.4 and 3.2 mm electrodes.

Art. no. ........................82036230

TUNGSTEN GRINDING

* Used liquid is to be disposed of at your local hazardous waste disposal site.

20


WELDING VALUE

ACETYLENE PRESSURE REGU-LATOR 2 MANOMETERSHigh-quality and high-capacity pressure regulator for acety-lene. Max. 40 bar primary pres-sure. With manometer for gas flow read-out. Operating range: 0-4 barCapacity: 5 m3/hInlet thread: G3/4”extOutlet thread: G3/8”LH Art. no. .......................81963065

OXYGEN PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity pressure regulator for oxygen.Max. 200 bar primary pressure. With manometer for gas flow read-out. Operating range: 0-16 barCapacity: 30 m3/hInlet thread: W21.8x14/1” Outlet thread: G3/8”

Art. no. .......................81963066

PRESSURE REGULATORS

CO2 PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity CO2 pressure regulator. Max. 200 bar primary pressure. Equipped with manometer for gas flow read-out.Operating range: 0-35 l/min. Inlet thread: W21.8x14/1”Outlet thread: G3/8”

Art. no. .......................81963034

ARGON/MIX PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. Equipped with manometer for gas flow read-out. Operating range: 0-35 l/min. Inlet thread: W24.32x14/1”Outlet thread: G3/8”

Art. no. .......................81963038

Pressure regulators

A high rate of return for quite a modest investment! Migatronic pressure regulators with incorporated gas saver function will allow you to save up to 50% of your gas consumption. Pressure regulators will also help you to monitor the amount of gas in the cylinder and prevent you from running out of gas during welding.

CO2 PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. Equipped with manometer for gas flow read-out. Operating range: 0-35 l/min. Inlet thread: R3/4”Outlet thread: G3/8”

Art. no. .......................81963035

ARGON/MIX PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. Equipped with manometer for gas flow read-out. Operating range: 0-35 l/min. Inlet thread: W24,52extOutlet thread: G3/8”

Art. no. .......................81963004

FORMIER/H2 PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity-pressure regulator for formier or H2.Max. 200 bar primary pressure. With manometer for gas flow read-out. Operating range: 0-16 barCapacity: 30 m3/hInlet thread: W21,8x14/1”LHOutlet thread: G3/8”LH

Art. no. .......................81963068

ARGON/MIX PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. With manometer for gas flow read-out. Operating range: 0-35 l/min.Inlet thread: W21,8x14/1”Outlet thread: M12x1

Art. no. .......................81963347

ARGON/MIX PRESSURE REGULATOR 2 MANOMETERSHigh-quality and high-capacity CO2 pressure regulator. Max. 200 bar primary pressure. With manometer for gas flow read-out. Operating range: 0-35 l/min.Inlet thread: W21,8x14/1”Outlet thread: G1/4”

Art. no. .......................81963348

ARGON/MIX REGULATOR 2 MANOMETERS BOTTOM CONNECTIONHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. With manometer for gas flow read-out. Operating range: 0-35 l/min.Inlet thread: G5/8”extOutlet thread: G3/8”

Art. no. .......................81963346

21


WELDING VALUE

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas con-sumption can be reduced by up to 50%. Result = fewer replacements of gas cylinders and improved production effi-ciency. Inlet thread: W24.32x14/1” Outlet thread: G3/8”

Art. no. .......................81963041

PRESSURE REGULATORS

Migatronics offers a wide range of pressure regulators, including pressure regulators for central systems.

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas consump-tion can be reduced by up to 50%. Result = fewer replace-ments of gas cylinders and improved production efficiency. Inlet thread: W21,8x14/1”Outlet thread: G1/4”

Art. no. .......................81963047

ARGON/H2 OPTIMATOR 1 FLOWMETERArgon/H2 Optimator with built-in gas saver. Gas con-sumption can be reduced by up to 50%. Result = fewer replacements of gas cylinders and improved production effi-ciency. Inlet thread: W21,8x14/1”LHOutlet thread: G3/8”LH

Art. no. .......................81963048

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas consump-tion can be reduced by up to 50%. Result = fewer replace-ments of gas cylinders and improved production efficiency. Inlet thread: W21,8x14/1”Outlet thread: M12x1

Art. no. .......................81963315

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas con-sumption can be reduced by up to 50%. Result = fewer replace-ments of gas cylinders and improved production efficiency. Inlet thread: W21,8x14/1”Outlet thread: G3/8”

Art. no. .......................81963309

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas consump-tion can be reduced by up to 50%. Result = fewer replace-ments of gas cylinders and improved production efficiency. Inlet thread: W24,5x14/1”Outlet thread: G3/8”

Art. no. .......................81963324

ARGON/MIX OPTIMATOR 1 FLOWMETER BOTTOM CONNECTIONArgon/mix Optimator with built-in gas saver. Gas consump-tion can be reduced by up to 50%. Result = fewer replace-ments of gas cylinders and improved production efficiency. Inlet thread: G5/8”extOutlet thread: G3/8”

Art. no. .......................81963080

ARGON/MIX OPTIMATOR 1 FLOWMETERArgon/mix Optimator with built-in gas saver. Gas consumption can be reduced by up to 50%. Result = fewer replacements of gas cylinders and improved pro-duction efficiency. Inlet thread: G5/8” Side EntryOutlet thread: G3/8”

Art. no. .......................81963081

ARGON/H2 OPTIMATOR 2 FLOWMETRESArgon/H2 Optimator with 2 flowmetres. Used for shielding gas and back-up gas from the same gas cylinder. Equipped with gas saver. Gas consumption can be reduced by up to 50%. Inlet thread: W21,8x14/1”LHOutlet thread: G3/8”LH

Art. no. .......................81963051

ARGON/MIX OPTIMATOR 2 FLOWMETRESArgon/mix Optimator with 2 flowmetres. Used for shielding gas and back-up gas from the same gas cylinder. Equipped with gas saver. Gas consumption can be reduced by up to 50%. Inlet thread: W21,8x14/1”Outlet thread: G1/4”

Art. no. .......................81963050

22


WELDING VALUE

PRESSURE REGULATORS

OPTIMATOR TAP UNIT LOCKABLE 1 FLOWMETERLockable Optimator tap unit for Argon with built-in gas-saver. For mounting on stop valves at the welding spot in central systems. Flowmeter with operating range: 0-35 l/min.Inlet thread: G3/8”Outlet thread: G3/8”

Art. no. .......................81963327

FORMIER PRESSURE REGULATOR 1 FLOWMETERHigh-quality and high-capacity Formier pressure regulator. Max. 200 bar primary pressure. With flowmeter for gas flow read-out. Operating range: 0-34 l/min. Inlet thread: W21.8x14/1”LH Outlet thread: G3/8”LH

Art. no. .......................81963067

ARGON/MIX PRESSURE REGU-LATOR 2 FLOWMETRESArgon/mix pressure regulator. Max. 200 bar primary pressure. With 2 flowmetres for gas flow read-out. Used for shielding gas and back-up gas from the same gas cylinder.Operating range: 0-34 l/min.Inlet thread: W24.32x14/1”Outlet thread: G3/8”

Art. no. .......................81963057

OPTIMATOR TAP UNIT 1 FLOWMETEROptimator tap unit with built-in gas-saver. For mounting on stop valves at the welding spot in central systems. Flowmeter with operating range: 0-35 l/min.Inlet thread: G3/8”Outlet thread: G3/8”

Art. no. .......................81963045

AR/MIX OPTIMATOR FOR RETROFITTINGArgon/mix Optimator gas-saver. For retrofitting on ordinary pressure regulators or tap units.Inlet thread: G3/8”Outlet thread: G3/8”

Art. no. .......................81963054

OPTIMATOR ALTOPArgon/mix gas saver equipped with quick-release fittings for Altop. Mounting on Altop cylinder does not require additional fittings.

Art. no. .......................81963316

OPTIMATOR TAP UNIT 1 FLOWMETEROptimator tap unit with built-in gas-saver. For mounting on stop valves at the welding spot in central systems. Flowmeter with operating range: 0-35 l/min.Inlet thread: G3/8”Outlet thread: G1/4”

Art. no. .......................81963052

ARGON/MIX PRESSURE REGULATOR 1 FLOWMETERHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. With flowmeter for gas flow read-out. Operating range: 0-34 l/min.Inlet thread: W24,5x14/1”Outlet thread: G3/8”

Art. no. .......................81963320

ARGON/MIX PRESSURE REGULATOR 1 FLOWMETERHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. Equipped with flowmeter for gas flow read-out. Operating range: 0-35 l/min. Inlet thread: W24.32x14/1” Outlet thread: G3/8”

Art. no. ......................81963055

ARGON/MIX PRESSURE REGULATOR 1 FLOWMETERHigh-quality and high-capacity Argon/mix pressure regulator. Max. 200 bar primary pressure. With flowmeter for gas flow read-out. Operating range: 0-34 l/min.Inlet thread: W21,8x14/1”Outlet thread: G1/4”

Art. no. .......................81963097

23


WELDING VALUE

HIGH-PRESSURE MANOMETER OPTIMATORHigh-pressure manometer 0-315 bar. Spare part for Migatronic Optimators.

Art. no. ........................81963127

FLOWMETER TUBE COMPLETEComplete flowmeter tube 0-34 l/min. External thread in pro-tective glass. For old models.

Art. no. ........................81963128

WALL FITTING FOR TAP UNITWall fitting for mounting of stop valves for tap units.

Art. no. ........................81963130

ANGLE PIECE FOR TAP UNITAngle piece for mounting tap units. Thread: G3/8”

Art. no. ........................81963131

T-PIECE FOR TWIN TAP UNITT-piece for mounting of twin tap unit. Thread: G3/8”

Art. no. ........................81963132

STOP VALVE FOR TAP UNITStop valve for mounting between central system and tap unit. Thread: G3/8”

Art. no. ........................81963133

FLOWMETER TUBE EXTERIORExterior tube for flowmeter tube. For pressure regulators with swivel nut, new model.

Art. no. ........................81963137

FLOWMETER TUBE COMPLETEComplete flowmeter tube. For pressure regulators with swivel nut, new model.

Art. no. ........................81963138

LOW-PRESSURE MANOMETER ACETYLENELow-pressure 0-4 bar manom-eter. Spare part for Migatronic acetylene pressure regulator.

Art. no. ........................81963140

HIGH-PRESSURE MANOMETER ACETYLENEHigh-pressure 0-40 bar manom-eter. Spare part for Migatronic acetylene pressure regulator.

Art. no. ........................81963141

HIGH-PRESSURE MANOMETER CO2 AND ARGON/MIX High-pressure 0-315 bar manometer. Spare part for Migatronic CO2 and Argon/mix pressure regulator.

Art. no. ........................81963144

LOW-PRESSURE MANOMETER CO2 AND ARGON/MIXLow pressure manometer. 0-35 l/min. Spare part for Migatronic CO2 and Argon/mix pressure regulators.

Art. no. ........................81963145

LOW-PRESSURE MANOMETER OXYGENLow pressure manometer 0-16 bar. Spare part for Migatronic oxygen pressure regulator.

Art. no. ........................81963165

FLOWMETER TUBE EXTERIORExterior tube for flowmeter tube. Exterior thread in glass. For old models.

Art. no. ........................81963173

PARTS FOR PRESSURE REGULATORS

24


WELDING VALUE

GAS PRE-HEATER CO2 220VGas pre-heater for CO2 to be placed between cylinder and pressure regulator. Prevents cooling of the pressure regula-tor in case of large gas flows.Max. flow: 1200 l/hour

Art. no. ........................81960048

FLASHBACK ARRESTOR OXYGENNon-resetable flashback arres-tor for oxygen which stops and extinguishes backfire. Equipped with safety fuse that shuts off the gas flow in case of over-heating. Art. no. ........................81963120

FLASHBACK ARRESTOR ACETYLENENon-resetable flashback arres-tor for acetylene which stops and extinguishes backfire. Equipped with safety fuse that shuts off the gas flow in case of overheating.Art. no. ........................81963121

SWIVEL NUT GASKETS ARGON/MIXSwivel nut gaskets in packages of 5 for argon/mix pressure regulators.

Art. no. ........................81963129

SWIVEL NUT GASKET ACETYLENESwivel nut gaskets in packages of five for acetylene pressure regulators.

Art. no. ........................81963139

HOSE NIPPLE WITH SWIVEL NUT 1/4”Hose nipple with swivel nut. Spare part for Migatronic pres-sure regulators with G1/4” out-let thread.

Art. no. ........................81963146

HOSE NIPPLE WITH SWIVEL NUT 3/8” Hose nipple with swivel nut. Spare part for Migatronic pressure regulators with G3/8” outlet thread.

Art. no. ........................81963147

PARTS FOR PRESSURE REGULATORS

FLOWMETERFlowmeter for control of the actual gas flow in the gas nozzle.

Art. no. ........................81010000

TWIN OUTLET FOR PRESSURE REGULATORFor two outlets on one Migatronic argon or oxygen pressure regulator with G3/8” thread.

Art. no. ........................81963149

25


WELDING VALUE

STARTER KIT, STAINLESS Starter kit for 0.8 mm stainless steel. Applicable for transformer- based Automig welding machines with 2-roll wire feed system. Supplied with 15 kg welding wire, pressure regula-tor, wire rolls kit and liner.

Art. no. ........................81100121

STARTER KIT, ALUMINIUM Starter kit for 1.0 mm alu-minium. Applicable for trans-former-based Automig welding machines with 2-roll wire feed system. Supplied with 6 kg welding wire, pressure regula-tor, wire rolls kit, liner and contact tips.

Art. no. ........................81100120

WEARING PARTS BOX WITH INSERTS Wearing parts box with inserts, exclusive of wearing parts. Ideal for storing wearing parts for welding torches.

TIG Art. no. ........................81100210

MIGArt. no. ........................81100211

ML150B steel 0.6-0.8 mmArt. no. ........................81100222

ML150 steel 0.8 mmArt. no. ........................81100223

ML250 steel 0.8-1.0 mmArt. no. ........................81100224

ML/MV240 steel 0.6-0.8 mmArt. no. ........................81100214

ML/MV240 steel 1.0 mmArt. no. ........................81100231

STARTER KITS, WEARING PARTS ETC.

Starter kits, wearing parts boxes etc.

Once you have invested in a Migatronic welding machine, you also need filler materials and wearing parts. Starter kits help you get started and save money on your total purchase amount.

ML300 steel 1.0 mmArt. no. ........................81100232

MV450/550 steel 1.0-1.2 mmArt. no. ........................81100216

MV400 FKS steel 1.0-1.2 mmArt. no. ........................81100236

MV500 FKS steel 1.0-1.2 mmArt. no. ........................81100237

TIG 101/301/321 1.6-2.4 mmArt. no. ........................81100228

TIG 101/301/321 2.4-3.2 mmArt. no. ........................81100248

TIG 201/221/401 1.6-2.4 mmArt. no. ........................81100230

TIG WP24/DSF225 1.6-2.4 mmArt. no. ........................81100238

ZETA 60Art. no. ........................81100233

ZETA 100Art. no. ........................81100239

WEARING PARTS BOXESWearing parts boxes with inserts, including wearing parts. Ideal for storing wearing parts for welding torches.

PLASTIC ADAPTER Plastic wire adaptor for switch-over between plastic spools (D300) and metal spools (K300).

Art. no. ....................... 81899017

ADAPTER FOR 5KG WIRE ROLLAdaptor for use on the wire hub of the welding machine along with 5 kg/D200 wire spools.

Art. no. ....................... 45050333

K4000 GOUGING TORCHGouging torch complete with cable. Total length 220 cm. Classified to 1000 amps. In ad-dition to gouging electrodes, use compressed air along with the hose.

Art. no. ....................... 81899001

GOUGING ELECTRODESGouging electrodes, 5 x 305 mm. Art. no. ....................... 81899005

Gouging electrodes, 6 x 305 mm. Art. no. ....................... 81899006

Gouging electrodes, 8 x 305 mm. Art. no. ....................... 81899008

Gouging electrod. 9.5 x 305 mm. Art. no. .........................81899010

Gouging electrod. 12.7 x 305 mm. Art. no. ....................... 81899013

TORCH PROTECTORThe torch protector protects torch and central connec-tion on the welding machine against impacts and collisions. For mounting on Migatronic MIG/MAG welding machines with central connection.

Art.no. ........................ 78861400

26


WELDING VALUE

MIGA-LIFTSpecially designed robust trol-ley with large rubber wheels for safe transport of gas cylinders. Use the turning handle to lift the gas cylinder and lower it onto the welding machine. The Miga-Lift is equipped with a self-locking turning mechanism which locks and lifts the gas cylinder in one operation.Art. no. ....................... 70619800

Protect your back! Use Miga-Lift and avoid heavy lifting.

CHEMICALS

Chemicals

Migatronic’s chemical products support optimal welding results and comply with the requirements of the law for storage and documentation. 16-point safety data sheets can be downloaded at migatronic.com.

MIG PASTE 300 GWelding and protection paste. Protects gas nozzles against spatter. Made of purely natu-ral products. Silicone-free. Supplied in 300 g cans.

Art.no. .........................81950026

MIG SPRAY 25 KG SILICONE-FREESilicone-free MIG spray refill. Supplied in 25 kg cans.

Art.no. .........................81950028

MIGALUBE 50 MLDirt-proof, dust-proof and water-resistant dry lubricant for cleaning of Migatronic plastic feed rolls. The lubricant provides a protective non-drip coating that minimises wear of the movable parts.

Art.no. .........................99150000

MIG WELDING LIQUID, 10 LApproved for galvanising with-out extra cleaning. Prevents weld spatter on workpiece and gas nozzle which reduces the need for maintenance of the welding equipment. Concentrated liquid: do not overdose. Supplied in 10 liter cans.

Art.no. .........................81950034

GREEN COOLANT 5 LITRES -12° CEco-friendly coolant for water-cooled welding machines.Frost-proof down to -12°C.Supplied in 5 litre cans. Use ofcorrect coolant ensures longerlife of the welding machine.

Art.no. .........................99290506

CONCENTRATED COOLANTConcentrated coolant for frost-proofing below -12° C. Supplied in 1 litre cans.

Ratio: Temperature / Add concentrate per litre ready-mixed coolant-21° C / 1 dl -24° C / 2 dl-27° C / 3 dl

Art.no. .........................99290508

27


WELDING VALUE

MULTI PLUG 6-POLE1. Multi plug, female: Art. no.. .......................17200001.....................................................2. Multi plug, male: Art. no.. .......................17210001

3. Multiplug housing (plastic) for mounting on machineArt. no.. .......................18200002

4. Multiplug housing (metal)for mounting on hose Art. no.. .......................18200101

5. Multiplug housing (metal)for mounting on machine Art. no.. .......................18200102

6. Extension for metal multiplug housing for mounting on hoseArt. no.. .......................18200103

7. Junction box (metal):Art. no.. .......................74348002

MULTI PLUG 8-POLE8. Multi plug, female:Art. no.. .......................17200023

9. Multi plug, male:Art. no.. .......................17210024

MULTI PLUG 19-POLE11. Multi plug, male: Art. no.. .......................17210026





ORIGINAL MIGATRONIC SPARE PARTS

Original spare parts

Original Migatronic spare parts ensure correct maintenance and long life of your welding equipment. Below you will find a small selection of our original spare parts. For other recommended spare parts, please refer to spare parts lists/manuals at migatronic.com.

MMA ELECTRODE HOLDERFully isolating rubber cap. 2 pos. welding angle 45° or 90°. Optimal current transfer. Screw type for optimal electrode grip.

200 A Art. no.. ............80550010

450 A Art. no.. ............80550009

600 A Art. no.. ............80550008

MMA ELECTRODE HOLDER “ALLIGATOR CLIP”

300 A Art. no.. ............80550037

400 A Art. no.. ............80550035

600 A Art. no.. ............80550036

200 A Art. no.. ............80550038

SPARE HEAD FOR MMA ELECTRODE HOLDER 45/90° 200 AArt. no.. .......................80550027

45/90° 450 og 600 AArt. no.. .......................80550028

DINSE PLUG, MALE10-25 mm2 ø10Art. no.. .......................18120006

35-50 mm2 ø13Art. no.. .......................18120002

50-70 mm2 ø13Art. no.. .......................18120003

70-95 mm2 ø13Art. no.. .......................18120004

DINSE COUPLING SOCKET, FEMALE10-25 mm2 ø10Art. no.. .......................18110001

35-50 mm2 ø13Art. no.. .......................18110002

50-70 mm2 ø13Art. no.. .......................18110003

CURRENT CABLE EXTENSION, FEMALE10-25 mm2 ø10Art. no.. .......................18110101

35-50 mm2 ø13Art. no.. .......................18110102

70-95 mm2 ø13Art. no.. .......................18110103

Multi plugs, dinse plugs, earth clamps and electrode holders

EARTH CLAMP250 A Art. no. .............80560010

400 A Art. no. .............80560011

500 A Art. no. .............80560012

EARTH CLIP200 A Nevada 200Art. no. ........................80560001

300 A Nevada 350Art. no. ........................80560002

SCREW EARTH CLAMP600 AArt. no. ........................80560009

12

13

14

15

1

2

3

4

5

6

7

8

9 11

MIGATRONIC WORLDWIDE

www.migatronic.com

www.migatronic.fi

www.migatronic.no

www.migatronic.se

www.migatronic.dk

www.migatronic.co.uk

www.migatronic.nl

www.migatronic.de

www.migatronic.cz

www.migatronic.fr

www.migatronic.it

www.migatronic.hu

www.migatronic.in

www.migatronic.cn

Migatronic A/SAggersundvej 33DK-9690 Fjerritslev, DanmarkTel: (+45) 96 500 600Telefax: (+45) 96 500 601migatronic.com 52

1700

04 (

01.0

1.20

19)

HIGH-QUALITY MIGATRONIC WELDING ACCESSORIES · their employers attach great importance to safety...

Documents

Transcript of HIGH-QUALITY MIGATRONIC WELDING ACCESSORIES · their employers attach great importance to safety...