High quality engineering and Worldwide advice and sales ... · AKT3SCC001BE200804 HOERBIGER...
Transcript of High quality engineering and Worldwide advice and sales ... · AKT3SCC001BE200804 HOERBIGER...
Screw Compressor Controls Worldwide advice and salesHigh quality engineering andlong experience – for the highest economy,performance and reliability
Problem-free, energy-saving compressor operation, reliability and low maintenance
costs are the results of thorough development work – based on close partnership
with the customer.
Product information
Detailed data sheets describe
the main characteristics of
the equipment and provide
application and installation
data obtained from practical
tests and measurements.
Economic upgrading
Investigations into specifi c
applications can be carried
out by our screw compressor
specialists on compressor
supplied by the customer on
our own in-house test rigs.
Tests and measurements can
also be done at the
customer‘s site, as our teams
and their hardware and soft-
ware are fl exible and mobile.
The parameters established
in this way are decisive for
the economical upgrading
of the compressor with
HOERBIGER control
equipment.
Installation proposals
Our valve and control equip-
ment literature contains
suggestions on installation
and an example of a layout.
Individual advice will provide
suggestions for the installa-
tion of our equipment, its
connections and its compati-
biliy with other equipment on
the compressor, and where
appropriate we can provide
technical support for com-
pressor trials.
www.hoerbiger.com
AKT3SCC001BE200804
HOERBIGER Compression Technology is a business unit of HOERBIGER Holding AG, Zug / Switzerland. HOERBIGER is active
throughout the world as a leading player in the fi elds of compression technology, automation technology and drive technology.
In 2007, its 6,300 employees achieved sales of around 1 billion Euro. The focal points of its business activities include key
components and services for compressors, engines and turbomachines, pneumatic and hydraulic systems for vehicles and machine
tools, as well as components and systems for shift and clutch operations in vehicle drive trains of all kinds. Through innovations in
attractive technological niche markets, the HOERBIGER Group sets standards and delivers cutting-edge solutions for the benefi t of
its customers.
For the best tailor-made solutions: tests, measurements, advice and service
HOERBIGER’s complete range of various screw compressor control shemes
Expert advice from HOERBIGER Compression Technology ensures that the control
process, component function, equipment and dimensions are in perfect harmony and
meet the demands of the application.
Research and development
Experience over decades in
development and design of
valves and control equipment
for screw compressors is the
key to:
■ High-tech materials
■ 3D-CAD
■ Finite Elements
Method calculations FEM
■ Endurance tests on the
compressor
■ Rapid prototyping
■ Development in
partnership with OEMs
■ Continuous design
improvement with
innovative solutions
Expert advice
Expert advice on the choice of
valves and control equipment
will signifi cantly improve the
quality of the compressor
control and can also save
up to 50% of the cost of
buying and fi tting compressor
control equipment.
For this we need:
For all inquiries:
The main data for the com-
pressor (capacity, fi nal pres-
sure, type of compressor)
For special applications,
optimised tuning, etc:
Detailed data corresponding
to the range of advice
required.
For special valves or control
modules, tailor-made for
mass-produced compressors:
Detailed specifi cation for the
compressor and its applica-
tion.
Tests and measurements
In the laboratory: Physical
and chemical suitability of
materials: Function, perfor-
mance, tightness and dura-
bility of complete products,
sub-assemblies and individual
parts.
On the compressor test rig:
Performance and durability
in real working conditions;
ease of installation and
servicing; suitability for
different control processes;
compatibility with other
HOERBIGER and non-
HOERBIGER equipment on
the compressor.
Consequent usage of FEM analysis helpse. g. to fi nd the optimum shape of housings or other important design features.
Valves and capacity control modulesfor the suction side
Pneumatic controllersand servo drives
P2
Z, P
PR
ARC, ARC-T
HAKDKS
DKHDK
MPLVH
MPLVC
MPVL, MD
ETS
P3 Z, P
WAVP
HWV PMAX
A
OSV TV, TF
Start, stop and idlingequipment
Components for the discharge line
Equipment for oil and air lines
HOERBIGER’s quality assurance conforms to ISO 9001 and is certfi ed by Lloyd’s Register
Valves and capacity control modules for the suction side
■ For oil-injected screw compressors which are pressurized at shutdown
Suction control valves HAK, HDK, AS
■ For oil-injected and oil-free compressors which are not pressurized at shutdown
Butterfl y valves and butterfl y valve controllers DK, DKS
Pneumatic controllers and servo drives
■ Controllers for stepless matching of output to demand
Proportional controllers P2, P3, PR
■ Controllers for full load/idling two point control
Pilot valves ARC, ARC-T
■ Servo drives to operate valves and motor speed controllers
Servo cylinders Z and P
Start, stop and idling equipment
For oil-injected compressors
■ Venting at shutdown
Venting valves VV, HEV
■ Reducing oil separator pressure at idling VV, HEV
■ Blowing-off excess air at idling
Bleed valve AVP
Components for the discharge line
■ Minimum pressure/non-return valves to maintain pressure
in oil-injected compressors
Minimum pressure valves MPVL, MPVLC, MPVLH, MD
Assembly kit ETS
Equipment for the oil and air lines
■ For oil-injected and oil-free compressors
Non-return valves A
■ For oil-injected compressors
Oil stop valves OSV
Thermostatic valves TV, TF
For the best tailor-made solutions: tests, measurements, advice and service
HOERBIGER’s complete range of various screw compressor control shemes
Expert advice from HOERBIGER Compression Technology ensures that the control
process, component function, equipment and dimensions are in perfect harmony and
meet the demands of the application.
Research and development
Experience over decades in
development and design of
valves and control equipment
for screw compressors is the
key to:
■ High-tech materials
■ 3D-CAD
■ Finite Elements
Method calculations FEM
■ Endurance tests on the
compressor
■ Rapid prototyping
■ Development in
partnership with OEMs
■ Continuous design
improvement with
innovative solutions
Expert advice
Expert advice on the choice of
valves and control equipment
will signifi cantly improve the
quality of the compressor
control and can also save
up to 50% of the cost of
buying and fi tting compressor
control equipment.
For this we need:
For all inquiries:
The main data for the com-
pressor (capacity, fi nal pres-
sure, type of compressor)
For special applications,
optimised tuning, etc:
Detailed data corresponding
to the range of advice
required.
For special valves or control
modules, tailor-made for
mass-produced compressors:
Detailed specifi cation for the
compressor and its applica-
tion.
Tests and measurements
In the laboratory: Physical
and chemical suitability of
materials: Function, perfor-
mance, tightness and dura-
bility of complete products,
sub-assemblies and individual
parts.
On the compressor test rig:
Performance and durability
in real working conditions;
ease of installation and
servicing; suitability for
different control processes;
compatibility with other
HOERBIGER and non-
HOERBIGER equipment on
the compressor.
Consequent usage of FEM analysis helpse. g. to fi nd the optimum shape of housings or other important design features.
Valves and capacity control modulesfor the suction side
Pneumatic controllersand servo drives
P2
Z, P
PR
ARC, ARC-T
HAKDKS
DKHDK
MPLVH
MPLVC
MPVL, MD
ETS
P3 Z, P
WAVP
HWV PMAX
A
OSV TV, TF
Start, stop and idlingequipment
Components for the discharge line
Equipment for oil and air lines
HOERBIGER’s quality assurance conforms to ISO 9001 and is certfi ed by Lloyd’s Register
Valves and capacity control modules for the suction side
■ For oil-injected screw compressors which are pressurized at shutdown
Suction control valves HAK, HDK, AS
■ For oil-injected and oil-free compressors which are not pressurized at shutdown
Butterfl y valves and butterfl y valve controllers DK, DKS
Pneumatic controllers and servo drives
■ Controllers for stepless matching of output to demand
Proportional controllers P2, P3, PR
■ Controllers for full load/idling two point control
Pilot valves ARC, ARC-T
■ Servo drives to operate valves and motor speed controllers
Servo cylinders Z and P
Start, stop and idling equipment
For oil-injected compressors
■ Venting at shutdown
Venting valves VV, HEV
■ Reducing oil separator pressure at idling VV, HEV
■ Blowing-off excess air at idling
Bleed valve AVP
Components for the discharge line
■ Minimum pressure/non-return valves to maintain pressure
in oil-injected compressors
Minimum pressure valves MPVL, MPVLC, MPVLH, MD
Assembly kit ETS
Equipment for the oil and air lines
■ For oil-injected and oil-free compressors
Non-return valves A
■ For oil-injected compressors
Oil stop valves OSV
Thermostatic valves TV, TF
For the best tailor-made solutions: tests, measurements, advice and service
HOERBIGER’s complete range of various screw compressor control shemes
Expert advice from HOERBIGER Compression Technology ensures that the control
process, component function, equipment and dimensions are in perfect harmony and
meet the demands of the application.
Research and development
Experience over decades in
development and design of
valves and control equipment
for screw compressors is the
key to:
■ High-tech materials
■ 3D-CAD
■ Finite Elements
Method calculations FEM
■ Endurance tests on the
compressor
■ Rapid prototyping
■ Development in
partnership with OEMs
■ Continuous design
improvement with
innovative solutions
Expert advice
Expert advice on the choice of
valves and control equipment
will signifi cantly improve the
quality of the compressor
control and can also save
up to 50% of the cost of
buying and fi tting compressor
control equipment.
For this we need:
For all inquiries:
The main data for the com-
pressor (capacity, fi nal pres-
sure, type of compressor)
For special applications,
optimised tuning, etc:
Detailed data corresponding
to the range of advice
required.
For special valves or control
modules, tailor-made for
mass-produced compressors:
Detailed specifi cation for the
compressor and its applica-
tion.
Tests and measurements
In the laboratory: Physical
and chemical suitability of
materials: Function, perfor-
mance, tightness and dura-
bility of complete products,
sub-assemblies and individual
parts.
On the compressor test rig:
Performance and durability
in real working conditions;
ease of installation and
servicing; suitability for
different control processes;
compatibility with other
HOERBIGER and non-
HOERBIGER equipment on
the compressor.
Consequent usage of FEM analysis helpse. g. to fi nd the optimum shape of housings or other important design features.
Valves and capacity control modulesfor the suction side
Pneumatic controllersand servo drives
P2
Z, P
PR
ARC, ARC-T
HAKDKS
DKHDK
MPLVH
MPLVC
MPVL, MD
ETS
P3 Z, P
WAVP
HWV PMAX
A
OSV TV, TF
Start, stop and idlingequipment
Components for the discharge line
Equipment for oil and air lines
HOERBIGER’s quality assurance conforms to ISO 9001 and is certfi ed by Lloyd’s Register
Valves and capacity control modules for the suction side
■ For oil-injected screw compressors which are pressurized at shutdown
Suction control valves HAK, HDK, AS
■ For oil-injected and oil-free compressors which are not pressurized at shutdown
Butterfl y valves and butterfl y valve controllers DK, DKS
Pneumatic controllers and servo drives
■ Controllers for stepless matching of output to demand
Proportional controllers P2, P3, PR
■ Controllers for full load/idling two point control
Pilot valves ARC, ARC-T
■ Servo drives to operate valves and motor speed controllers
Servo cylinders Z and P
Start, stop and idling equipment
For oil-injected compressors
■ Venting at shutdown
Venting valves VV, HEV
■ Reducing oil separator pressure at idling VV, HEV
■ Blowing-off excess air at idling
Bleed valve AVP
Components for the discharge line
■ Minimum pressure/non-return valves to maintain pressure
in oil-injected compressors
Minimum pressure valves MPVL, MPVLC, MPVLH, MD
Assembly kit ETS
Equipment for the oil and air lines
■ For oil-injected and oil-free compressors
Non-return valves A
■ For oil-injected compressors
Oil stop valves OSV
Thermostatic valves TV, TF
Screw Compressor Controls Worldwide advice and salesHigh quality engineering andlong experience – for the highest economy,performance and reliability
Problem-free, energy-saving compressor operation, reliability and low maintenance
costs are the results of thorough development work – based on close partnership
with the customer.
Product information
Detailed data sheets describe
the main characteristics of
the equipment and provide
application and installation
data obtained from practical
tests and measurements.
Economic upgrading
Investigations into specifi c
applications can be carried
out by our screw compressor
specialists on compressor
supplied by the customer on
our own in-house test rigs.
Tests and measurements can
also be done at the
customer‘s site, as our teams
and their hardware and soft-
ware are fl exible and mobile.
The parameters established
in this way are decisive for
the economical upgrading
of the compressor with
HOERBIGER control
equipment.
Installation proposals
Our valve and control equip-
ment literature contains
suggestions on installation
and an example of a layout.
Individual advice will provide
suggestions for the installa-
tion of our equipment, its
connections and its compati-
biliy with other equipment on
the compressor, and where
appropriate we can provide
technical support for com-
pressor trials.
www.hoerbiger.com
AKT3SCC001BE200804
HOERBIGER Compression Technology is a business unit of HOERBIGER Holding AG, Zug / Switzerland. HOERBIGER is active
throughout the world as a leading player in the fi elds of compression technology, automation technology and drive technology.
In 2007, its 6,300 employees achieved sales of around 1 billion Euro. The focal points of its business activities include key
components and services for compressors, engines and turbomachines, pneumatic and hydraulic systems for vehicles and machine
tools, as well as components and systems for shift and clutch operations in vehicle drive trains of all kinds. Through innovations in
attractive technological niche markets, the HOERBIGER Group sets standards and delivers cutting-edge solutions for the benefi t of
its customers.
Screw Compressor Controls Worldwide advice and salesHigh quality engineering andlong experience – for the highest economy,performance and reliability
Problem-free, energy-saving compressor operation, reliability and low maintenance
costs are the results of thorough development work – based on close partnership
with the customer.
Product information
Detailed data sheets describe
the main characteristics of
the equipment and provide
application and installation
data obtained from practical
tests and measurements.
Economic upgrading
Investigations into specifi c
applications can be carried
out by our screw compressor
specialists on compressor
supplied by the customer on
our own in-house test rigs.
Tests and measurements can
also be done at the
customer‘s site, as our teams
and their hardware and soft-
ware are fl exible and mobile.
The parameters established
in this way are decisive for
the economical upgrading
of the compressor with
HOERBIGER control
equipment.
Installation proposals
Our valve and control equip-
ment literature contains
suggestions on installation
and an example of a layout.
Individual advice will provide
suggestions for the installa-
tion of our equipment, its
connections and its compati-
biliy with other equipment on
the compressor, and where
appropriate we can provide
technical support for com-
pressor trials.
www.hoerbiger.com
AKT3SCC001BE200804
HOERBIGER Compression Technology is a business unit of HOERBIGER Holding AG, Zug / Switzerland. HOERBIGER is active
throughout the world as a leading player in the fi elds of compression technology, automation technology and drive technology.
In 2007, its 6,300 employees achieved sales of around 1 billion Euro. The focal points of its business activities include key
components and services for compressors, engines and turbomachines, pneumatic and hydraulic systems for vehicles and machine
tools, as well as components and systems for shift and clutch operations in vehicle drive trains of all kinds. Through innovations in
attractive technological niche markets, the HOERBIGER Group sets standards and delivers cutting-edge solutions for the benefi t of
its customers.