High Pressure Pumps - Suhner Machining · France Somex SAS Ensisheim [email protected] +33...
Transcript of High Pressure Pumps - Suhner Machining · France Somex SAS Ensisheim [email protected] +33...
High Pressure Pumps
2 www.su-matic.com • [email protected] • +41 56 464 29 90
Information
All MP Systems Products Include:
• Two years parts warranty(excluding consumption parts)
• Complete and comprehensive installation manuals
• We stock all consumable parts
• Effective pre-sales and post-sales support
Our team works with CNC machine tool builders,distributors and customers to provide excellentcustomer service and application experience.
Our goal is to help make you more productivewith less downtime, decreased cycle times,improved tool life and more parts out the door.
Our Sales & Engineering Team will help you
MP Systems’ high pressure coolant systems and accessories are low maintenanceand longer lasting. We build and support a dependable product thanks to our team of engineers, quality components and dedicated sales and assembly personnel.
3
Mission Critical
Industrial
www.su-matic.com • [email protected] • +41 56 464 29 90
Features• High pressure 70 bar • Low maintenance
de-aeration feature • Available chiller option
• Very durable construction • 2 years parts warranty
Features• Many specialized options available • Abrasive duty upgrade option• Variable volume up to 30 l/min • Low maintenance• Variable pressures up to 70 bar • Available chiller option
• 2 years parts warranty
MORE CAPABILITY, MORE DURABILITY
Comparsion R & VR
R-Series VR-SeriesThe ‘R’ Series is designed to operate with minimal maintenance in environ-ments where machine uptime is critical
The ‘VR’ series is engineered to be
to allow full advantage to betaken of
found in very sophisticated machine tools.
• OD & ID turning operations on all materials • OD & ID turning operations on all materials
• Deep hole drilling • Deep hole drilling
• Pocket milling • Pocket milling
• Abrasive duty option available • Abrasive duty option available
• Use chiller option to enhance work piece • Use chiller option to enhance work piece
• Thermal stability
• Maximum performance for a variety of tooling sizes and requirements
LATHES
MILLS
MA
CH
ININ
G A
PP
LIC
ATIO
N
4
RF8
R-Series
www.su-matic.com • [email protected] • +41 56 464 29 90
RF8Fluid Type Cutting Oil or WaterMax. Pressure Up to 70 BarMax. Flow Rate Up to 30 l/minPressure Type Manually AdjustableNo. of Coolant Outputs 2 (3rd Optional)Filtration 5 Micron Twin FiltersMain Motor HP 7.5 (5.5 kW)Voltage -3 Phase: 200 V or 400 VAmperage 200v 28 FLA – 400v 14 FLAControl Voltage 24 VFeed/Supply Pump StandardDirty Filter Alarm Standard
OptionFoot Print (LxWxH) 92 cm x 72 cm x 108 cmWeight 386 kg
• 30 l/min up to 70 bar
• Manually adjustable pressure
• Patented diaphragm pump
• 190 Liter reservoir
• Built-in feed/supply pump
• 200 V or 400 V
• Use with water or oil coolants
• Portable rolling castors standard
• 2 Coolant outputs
• Clear display PLC
• MP 1200 mist collector
Part no.: 3300020001
• Third coolant output
• Pressure Regulator Valve (provides second pressure setting)
• Abrasive duty upgrade
• Mounted chiller
Part no.: 3300010001
5
R-SeriesRTF
www.su-matic.com • [email protected] • +41 56 464 29 90
RTFFluid Type Cutting Oil or WaterMax. Pressure Up to 70 BarMax. Flow Rate Up to 2 x 30 l/minPressure Type Manually AdjustableNo. of Coolant Outputs 2 (3rd Optional)Filtration 5 Micron Twin FiltersMain Motor HP 7.5 (5.5 kW)Voltage -3 Phase: 200 V or 400 VAmperage 200v 56 FLA – 400v 28 FLAControl Voltage 24 VFeed/Supply Pump StandardDirty Filter Alarm Standard
OptionFoot Print (LxWxH) 107 cm x 97 cm x 108 cmWeight 567 kg
• Two pumps each with 30 l/min up to 70 bar
• Manually adjustable pressure
• Two patented diaphragm pumps
• 265 Liter reservoir
• Built-in feed/supply pump
• 200 V or 400 V
• Use with water or oil coolants
• Portable rolling castors standard
• 2 Coolant outputs
• Clear display PLC
• MP 1200 mist collector
Part no.: 3300020001
• Third coolant output
• Abrasive duty upgrade
• Mounted chiller
Part no.: 3300010004
6
VR8
VR-Series
www.su-matic.com • [email protected] • +41 56 464 29 90
VR8Fluid Type Cutting Oil or WaterMax. Pressure 20 to 70 BarMax. Flow Rate Up to 30 l/minPressure Type By CNC-control (M-codes)No. of Coolant Outputs 2 (3rd Optional)Filtration 5 Micron Twin FiltersMain Motor HP 7.5 (5.5 kW)Voltage -3 Phase: 200 V or 400 VAmperage 200v 28 FLA – 400v 14 FLAControl Voltage 24 VFeed/Supply Pump StandardDirty Filter Alarm Standard
OptionFoot Print (LxWxH) 92 cm x 72 cm x 108 cmWeight 386 kg
• 30 l/min up to 70 bar
• Adjustable pressure, controlled by usingM-codes on CNC-control
• Patented diaphragm pump
• 190 Liter reservoir
• Built-in feed/supply pump
• 200 V or 400 V
• Use with water or oil coolants
• Portable rolling castors standard
• 2 Coolant outputs
• Clear display PLC
• MP 1200 mist collector
Part no.: 3300020001
• Third coolant output
• Abrasive duty upgrade
• Mounted chiller
Part no.: 3300010003
7
V2-Swiss
www.su-matic.com • [email protected] • +41 56 464 29 90
High Pessure Pumps V2-SwissVersatile, Compact System optimized for Swiss-Type Lathes
The V2 is a general purpose, compact-design high pressure coolant system. The most recent addition to MP Systems’ new generation product line, the V2 houses all of its internal components
down the cutting oil / water is already integrated .With each pump of the V2-Series comes valve block with 8 outputs, which is directly attached to the machine. These valves can be controlled individually and under pressure. The advantage is that only one hose leads to the machine and the cutting oil or coolant gets less warm on the way to the Tool.
V2-SeriesThe ‘V2’ series is designed for use inmulti-tool Swiss lathe environments for:• Optimal chip control
• Permit otherwise impossible machining operations including thru coolant deep hole and gun drilling
• Allow faster cycle times and longer tool life
• Heat exchanger to enhance work piece
• Abrasive duty option available
LATHES
MILLS
Features• 30 l/min, 70 bar with coolants • Built-in heat exchanger• 19 l/min, 130 bar with oil • Low maintenance• 8 port remote valve blocks • 2 years parts warranty• Built-in feed/supply pump
8
V2-SwissV2–HW
www.su-matic.com • [email protected] • +41 56 464 29 90
V2-HWFluid Type Cutting Oil or WaterMax. Pressure Up to 70 BarMax. Flow Rate Up to 30 l/minPressure Type Manually AdjustableNo. of Coolant Outputs 8 (12 Optional)Filtration 5 Micron Single FilterMain Motor HP 7.5 (5.5 kW)Voltage -3 Phase: 200 V or 400 VAmperage 200v 28 FLA – 400v 14 FLAControl Voltage 24 VFeed/Supply Pump StandardDirty Filter Alarm StandardFoot Print (LxWxH) 112 cm x 61 cm x 92 cmWeight 263 kg
• 30 l/min up to 70 bar
• Manually adjustable pressure
• Patented diaphragm pump
• Built-in heat exchanger
• Built-in feed/supply pump
• 200 V or 400 V
• Use with water or oil coolants
• Portable rolling castors standard
• Valve block with 8 coolant outputs
Part no.: 3300020001
• 12 coolant outputs
• Abrasive duty upgrade
Part no.: 3300010005
9
V2-SwissV2–HO
www.su-matic.com • [email protected] • +41 56 464 29 90
Part no.: 3300010006
V2-HOFluid Type Cutting OilMax. Pressure Up to 130 BarMax. Flow Rate Up to 19 l/minPressure Type Manually AdjustableNo. of Coolant Outputs 8 (12 Optional)Filtration 5 Micron Single FilterMain Motor HP 7.5 (5.5 kW)Voltage -3 Phase: 200 V or 400 VAmperage 200v 28 FLA – 400v 14 FLAControl Voltage 24 VFeed/Supply Pump StandardDirty Filter Alarm StandardFoot Print (LxWxH) 112 cm x 61 cm x 92 cmWeight 263 kg
• 19 l/min up to 130 bar
• Manually adjustable pressure
• Gear pump
• Built-in heat exchanger
• Built-in feed/supply pump
• 200 V or 400 V
• Use only with oil
• Portable rolling castors standard
• Valve block with 8 coolant outputs
Part no.: 3300020001
• 12 coolant outputs
• Abrasive duty upgrade
10 www.su-matic.com • [email protected] • +41 56 464 29 90
MP Systems has worked extensively with companies who routinely machine very abrasive materials to develop high pressure coolant systems which can withstand the challenges of cast iron, cast aluminum and steels coated with mill scale.
The proprietary upgrades we have developed for our R and VR series high pressure systems are available as the “Abrasive Duty Upgrade”.
High pressure coolant systems equipped with this upgrade operate reliably and with great durability pumping coolant laden with very abrasive materials such as sand, carbide and other casting residues.
Abrasive Duty Upgrade
11
___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ______________________________________________________________________________________ ___________________________________________ ___________________________________________ ___________________________________________
www.su-matic.com • [email protected] • +41 56 464 29 90
Notes
Switzerland OTTO SUHNER AG Lupfi g [email protected] +41 (0)56 464 28 28
Switzerland SU-matic AG Lupfi g [email protected] +41 (0)56 464 29 90
Germany Otto Suhner GmbH Bad Säckingen [email protected] +49 (0)7761 557 0
Austria SUHNER SU-matic Wien [email protected] +43 (0)1 587 16 14
USA SUHNER Industrial Products Corp. Rome, GA [email protected] +1 (706) 235-8046
France Somex SAS Ensisheim [email protected] +33 (0)3 89 81 12 12
Italy Suhner SU-matic S.r.l. Zola Predosa [email protected] +39 051 6 16 66 73
Mexico SUHNER Productos Industriales San Juan del Rio [email protected] +52 427 272 39 78
India SUHNER India Pvt. Ltd. Bangalore [email protected] +91 (0) 80- 27 831108
China Suhner (Suzhou) Ind. Techn. Ltd. Suzhou [email protected] +86 512 628 77 808
© S
U-m
atic
06/
20