HIGH PRESSURE EQUIPMENT - Oilogoilog.us/catalogues/HighPressureEquipment.pdfHIGH PRESSURE EQUIPMENT....
Transcript of HIGH PRESSURE EQUIPMENT - Oilogoilog.us/catalogues/HighPressureEquipment.pdfHIGH PRESSURE EQUIPMENT....
DESCRIPTION PAGE
SURFACE EQUIPMENTBlow Out Preventers 2
Manual Type 2Hydraulic Type 3Dual Hydraulic Type 4BOP Technical Sheet 5
Control Head Assembly 6Hydraulic Packing Nut BT 7Tree Connections 8Flange 10Flow Tee - High Pressure 12Flow Tee - Low Pressure 13Fluid Chamber 144 TPI Hand Union 15Hay Pulley 16Lubricators 17Lubricator Clamp 19Pump-In Sub w/WECO Union 20Quick Union 21Riser - Dual .5" NPT 22Stuffing Box 23Tool Catcher 24Wellhead Swedges 25Counter Head Assembly 26Line Wiper 27Staff Assembly 28Sucker Rod Pin x Box Chaser 29Hydraulic Line Wiper Swab Head 29Veeder Root 30Weight Indicator 30Counter Wheels 31Pressure Wheels 31Gin Pole 32Gin Pole Step 32Releasing Tool 33
PACKINGPacking 34
TABLE OF CONTENT
SLICKLINE & E-LINE STACK CONFIGURATION
Sheave
Stuffing Box
Head Catcher
Chemical Injection Sub
Lubricator
Bleed-Off
Quick Test Sub
Tool Trap
Hydraulic BOP
Pump-In-Sub/Flow T
Adapter Flange/Swedge
SLICKLINEE-LINE
Packoff /Line Wiper
Grease Head
Head Catcher
Chemical Injection Sub
Lubricator
Quick Test Sub
Tool Trap
Hydraulic BOP
Pump-In-Sub/Flow T
Adapter Flange/Swedge
1
BLOW OUT PREVENTER(MANUAL TYPE)
PurposeTo enable well pressure to be isolated and released from the lubricator without closing wellborevalves.Blowout Preventers are designed to give positive protection against blow outs when operating withwireline in well services work, by providing a positive seal around wireline.
DescriptionThe main body in the shape of a cross has a vertical full bore section to allow movement of wirelinetools in and out of the wellbore.
The horizontal ends of the cross often referred to as ram housing contain rams, with inner and outerseals. These rams can be rotated in and out of the housing with handles fastened to threaded stemsfor closing and opening ram bodies.
An equalizing assembly is located on the side of the main body with a bleed off port on the oppositeside, and located 90 degrees from ram housings. By opening an allen wrench operated valve seat theequalizing assembly allows pressure to be returned to the lubricator from the wellbore with ramsclosed.BOP are fitted with compatible hand unions for installation with surface equipment. Wireline BOP’sseal and hold pressure from below only.
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Working Pressure• Rams Required• Union Type• Line Size(s)• Service Type
Blow Out Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure.
2
BLOW OUT PREVENTER(HYDRAULIC TYPE)
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Working Pressure• Number of Actuators• Rams Required• Union Type• Line Size(s)• Service Type
This BOP's are available basically in two types: Hydraulically Operated andManually Operated, with configurations as desired. An equalizer valveallows the operator to equalize the pressure with lubricator pressure.
3
BLOW OUT PREVENTER(DUAL HYDRAULIC TYPE)
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Working Pressure• Number of Actuators• Rams Required• Union Type• Line Size(s)• Service Type
4
BLOW OUT PREVENTER
TYPE I.D. (INCH) W.P (PSI)PART NUMBER
MANUALPART NUMBER
HYDRAULIC
SINGLE 2.50 5,000 OIL-BOPM-250S-5K00-W01 OIL-BOPH-250S-5K00-W01SINGLE 2.50 10,000 OIL-BOPM-250S-10K0-W01 OIL-BOPH-250S-10K0-W01SINGLE 2.50 15,000 OIL-BOPM-250S-15K0-W01 OIL-BOPH-250S-15K0-W01DOUBLE 2.50 5,000 OIL-BOPM-250D-5K00-W01 OIL-BOPH-250D-5K00-W01DOUBLE 2.50 10,000 OIL-BOPM-250D-10K0-W01 OIL-BOPH-250D-10K0-W01TRIPLE 2.50 5,000 OIL-BOPM-250T-5K00-W01 OIL-BOPH-250T-5K00-W01TRIPLE 2.50 10,000 OIL-BOPM-250T-10K0-W01 OIL-BOPH-250T-10K0-W01TRIPLE 2.50 15,000 OIL-BOPM-250T-15K0-W01 OIL-BOPH-250T-15K0-W01QUAD 2.50 5,000 OIL-BOPM-250Q-5K00-W01 OIL-BOPH-250Q-5K00-W01QUAD 2.50 10,000 OIL-BOPM-250Q-10K0-W01 OIL-BOPH-250Q-10K0-W01SINGLE 3.00 5,000 OIL-BOPM-300S-5K00-W01 OIL-BOPH-300S-5K00-W01SINGLE 3.00 10,000 OIL-BOPM-300S-10K0-W01 OIL-BOPH-300S-10K0-W01DOUBLE 3.00 5,000 OIL-BOPM-300D-5K00-W01 OIL-BOPH-300D-5K00-W01DOUBLE 3.00 10,000 OIL-BOPM-300D-10K0-W01 OIL-BOPH-300D-10K0-W01TRIPLE 3.00 5,000 OIL-BOPM-300T-5K00-W01 OIL-BOPH-300T-5K00-W01
TRIPLE 3.00 10,000 OIL-BOPM-300T-10K0-W01 OIL-BOPH-300T-10K0-W01QUAD 3.00 5,000 OIL-BOPM-300Q-5K00-W01 OIL-BOPH-300Q-5K00-W01QUAD 3.00 10,000 OIL-BOPM-300Q-10K0-W01 OIL-BOPH-300Q-10K0-W01SINGLE 4.00 5,000 OIL-BOPM-400S-5K00-W01 OIL-BOPH-400S-5K00-W01SINGLE 4.00 10,000 OIL-BOPM-400S-10K0-W01 OIL-BOPH-400S-10K0-W01DOUBLE 4.00 5,000 OIL-BOPM-400D-5K00-W01 OIL-BOPH-400D-5K00-W01DOUBLE 4.00 10,000 OIL-BOPM-400D-10K0-W01 OIL-BOPH-400D-10K0-W01TRIPLE 4.00 5,000 OIL-BOPM-400T-5K00-W01 OIL-BOPH-400T-5K00-W01TRIPLE 4.00 10,000 OIL-BOPM-400T-10K0-W01 OIL-BOPH-400T-10K0-W01QUAD 4.00 5,000 OIL-BOPM-400Q-5K00-W01 OIL-BOPH-400Q-5K00-W01QUAD 4.00 10,000 OIL-BOPM-400Q-10K0-W01 OIL-BOPH-400Q-10K0-W01SINGLE 5.00 5,000 OIL-BOPM-500S-5K00-W01 OIL-BOPH-500S-5K00-W01SINGLE 5.00 10,000 OIL-BOPM-500S-10K0-W01 OIL-BOPH-500S-10K0-W01DOUBLE 5.00 5,000 OIL-BOPM-500D-5K00-W01 OIL-BOPH-500D-5K00-W01DOUBLE 5.00 10,000 OIL-BOPM-500D-10K0-W01 OIL-BOPH-500D-10K0-W01TRIPLE 5.00 5,000 OIL-BOPM-500T-5K00-W01 OIL-BOPH-500T-5K00-W01TRIPLE 5.00 10,000 OIL-BOPM-500T-10K0-W01 OIL-BOPH-500T-10K0-W01QUAD 5.00 5,000 OIL-BOPM-500Q-5K00-W01 OIL-BOPH-500Q-5K00-W01QUAD 5.00 10,000 OIL-BOPM-500Q-10K0-W01 OIL-BOPH-500Q-10K0-W01SINGLE 6.38 5,000 OIL-BOPM-638S-5K00-W01 OIL-BOPH-638S-5K00-W01DOUBLE 6.38 5,000 OIL-BOPM-638D-5K00-W01 OIL-BOPH-638D-5K00-W01TRIPLE 6.38 5,000 OIL-BOPM-638T-5K00-W01 OIL-BOPH-638T-5K00-W01QUAD 6.38 5,000 OIL-BOPM-638Q-5K00-W01 OIL-BOPH-638Q-5K00-W01
5
CONTROL HEAD ASSEMBLY
PurposeUsed to seal wireline or slickline in high pressure or volatile conditions.
DescriptionThe Control Head is made up of 9 main components:1. Female Bleed Collar2. Flow Tube3. Flow Tube Sleeve4. Injection Collar5. Bottom Sub6. Ported Spacer Sub7. Hand Union Nut8. Ball Seat Retainer9. Steel Ball
Please Specify The following When Ordering this Equipment:
• Working Pressure• Union Type• Line Size(s)• Hose Length
Part NumberAssembly OIL-CHAS-0000-0000-W01
6
HYDRAULIC PACKING NUT BT
Part NumberAssembly OIL-HPNBT-0000-0000-W01
COMPONENTS
Body
Plunger
Gland
Spring
Bottom Sub
Housing O-ring
Plunger O-ring
*Following Available Upon Request:* Hydraulic Packing Nut & Grease Injector Control Head Assembly -(5K, 10K & 15K Bowen Type)
* Hydraulic Line Wiper / Swab Head f/ 3/16" - 9/16" Cable - Less Union.
7
TREE CONNECTIONS
Part Number2 3/8" 8RD pin x 2 1/2" threaded half OIL-TC-2375P-25TH-W012 7/8" 8RD pin x 2 1/2" threaded half OIL-TC-2875P-25TH-W013 1/2" 8RD pin x 2 1/2" threaded half OIL-TC-3500P-25TH-W01(Above 4 3/4"-4 Bowen Type)
2 3/8" 8RD pin x 3" dbl. lead thrd. Half OIL-TC-2375P-3DTH-W012 7/8" 8RD pin x 3" dbl. lead thrd. half OIL-TC-2875P-3DTH-W013 1/2" 8RD pin x 3" dbl. lead thrd. half OIL-TC-3500P-3DTH-W01(Above Bowen Type)
2 3/8" 8RD pin x 5 x 4 threaded half OIL-TC-2375P-5X4TH-W012 7/8" 8RD pin x 5 x 4 threaded half OIL-TC-2875P-5X4TH-W013 1/2" 8RD pin x 5 x 4 threaded half OIL-TC-3500P-5X4TH-W01(Above Otis Type)
2 3/8" Cameron Acme sliding sleeve OIL-TC-2375-CASS-W012 7/8" Cameron Acme sliding sleeve OIL-TC-2875P-CASS-W013 1/2" Cameron Acme sliding sleeve OIL-TC-3500P-CASS-W01(Above without union)
2 3/8" Cameron Acme pin x 2 3/8" 8RD box OIL-TCCA-2375P-2375B-W012 7/8" Cameron Acme pin x 2 7/8" 8RD box OIL-TCCA-2875P-2875B-W013 1/2" Cameron Acme pin x 3 1/2" 8RD box OIL-TCCA-3500P-3500B-W01
Cameron Acme Pin x Threaded Half
Cameron Acme Sliding Sleeve
Tubing Pin x Threaded Half
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type• Working Pressure• For crossovers please specify which
end is “up”
8
TREE CONNECTIONSCameron Acme
Pin x Threaded Half
Cameron Acme Sliding Sleeve
Tubing Pin x Threaded Half
Part Number2 3/8" Cameron Acme pin x 2 1/2" thrd half OIL-TCCA-2375P-25TH-W012 7/8" Cameron Acme pin x 2 1/2" thrd half OIL-TCCA-2875P-25TH-W013 1/2" Cameron Acme pin x 2 1/2" thrd half OIL-TCCA-3500P-25TH-W01
2 7/8" Type A Gray-loc pin x 2 3/8" EUE 8RD box OIL-TCAG-2875P-2375EB-W013 1/2" Type A Gray-loc pin x 2 7/8" EUE 8RD box OIL-TCAG-350P-2875EB-W01
B-20 Gray Hub Tree Connection OIL-TCB20-GH00-0000-W01C-25 Gray Hub Tree Connection OIL-TCC25-GH00-0000-W01D-31 Gray Hub Tree Connection OIL-TCD31-GH00-0000-W01E-25 Gray Hub Tree Connection OIL-TCE25-GH00-0000-W01
B-20 Gray Hub Tree Connection x 2 1/2" threaded half OIL-TCB20-GH00-25TH-W01C-25 Gray Hub Tree Connection x 2 1/2" threaded half OIL-TCC25-GH00-0000-W01D-31 Gray Hub Tree Connection x 2 1/2" threaded half OIL-TCD31-GH00-0000-W01E-25 Gray Hub Tree Connection x 2 1/2" threaded half OIL-TCE25-GH00-0000-W01
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type• Working Pressure• For crossovers please specify which
end is “up”
9
FLANGE
PurposeConnects wireline surface equipment to wellhead.
DescriptionThe lower end of the Wellhead Flange is manufactured flanged tomatch the particular configuration of the wellhead. The upperend of the Flange is compatible to the bottom hand union of theBOP or flow sub.
Flanges are typically used in high pressure or H2S condition butare not limited to these.
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type• Working Pressure• Ring Gasket• Service type
10
FLANGE
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type• Working Pressure• Ring Gasket• Service type
11
FLOW TEE – HIGH PRESSURE
PurposeGives the ability to either pump into / or bleed off wellbore pressureunder high pressure.
DescriptionThe Flow Tee – HP consists of 6 components:1. Flow Sub Body2. Hand Nut3. Bottom Union4. Flow Sub to Nutron Valve Cross Over5. Nutron Valve to 6K Guiberson Style Union6. Nutron Ball Valve (not shown)The High Pressure Flow Tee incorporates a 2” high pressure quarterturn ball valve to allow rapid well control as well as a larger bore topump in / bleed off the well bore. The High Pressure Flow Tee alsoutilizes (but is not limited to) a 6K Guiberson style union for ease ofuse and capability of pressure
PrecautionsEnsure proper care and maintenance as abrasive debris may damagethe ball seat if left unchecked.
Part NumberAssembly OIL-FTHP-0000-0000-W01Flow Sub Body OIL-FTHP-0000-FSB0-W01Hand Nut OIL-FTHP-0000-HN00-W01Bottom Union OIL-FTHP-0000-BU00-W01X-over to Nutron Valve OIL-FTHP-0000-XONV-W01X-Over to Guiberson OIL-FTHP-0000-XOGB-W01
Please Specify The following When Ordering this Equipment:
• Union Type• Working Pressure• Ring Gasket
12
FLOW TEE – LOW PRESSURE
PurposeGives the ability to either pump into / or bleed off wellbore pressure.
DescriptionThe Flow Tee – LP consists of 3 components:1. Flow Sub Body2. Hand Nut3. Bottom UnionThe Low Pressure Flow Tee incorporates a 2” line pipe port to allow rapid well control as well as a larger bore to pump in / bleed off the well bore.
PrecautionsEnsure threads are not worn or damaged.
Part NumberAssembly OIL-FTLP-0000-0000-W01Flow Sub Body OIL-FTLP-0000-FSB0-W01Hand Nut OIL-FTLP-0000-HN00-W01Bottom Union OIL-FTLP-0000-BU00-W01
Please Specify The following When Ordering this Equipment:
• Union Type• Working Pressure
13
FLUID CHAMBER
PurposeGives the ability to pump any type of fluid desired, typically used topump oil into wellbore directly below the stuffing box to lubricate theseals within.
DescriptionThe fluid Chamber consists of 4 components:1. Fluid Chamber Body2. Gland3. Hand Nut4. Bottom UnionThe Fluid Chamber incorporates a ported gland internally and a reservoirthat lubricant, methanol, or any desired fluid may be pumped into toreduce icing, or line chatter, the liquid is installed via a .5” NPT port,which is connected to a hose and pump.
PrecautionsEnsure threads are not worn or damaged, it is recommended that acheck valve be installed in any hose or line that may contain wellborepressure.
Part NumberAssembly OIL-FLCH-0000-0000-W01Fluid Chamber Body OIL-FLCH-BDY0-0000-W01Gland OIL-FLCH-GL00-0000-W01Hand Nut OIL-FLCH-HN00-0000-W01Bottom Union OIL-FLCH-BU00-0000-W01
14
4 TPI HAND UNION
PurposeThe 4 TPI Hand Unions (Bowen style) – 5k is used to allow easy assembly /disassembly of lubricator and or surface equipment..
DescriptionHand Unions are made up of 3 components:1. Male Union Half2. Hand Nut3. Female Union Half
Applications5k working pressure lubricator strings; Connections for bleed subs and / orrisers; Hand Unions are available with any number of connections, pleasespecify when ordering.
PrecautionsEnsure that all “O”-ring grooves are not worn or damaged, also thatcorrosion is kept in check on “O”-ring surfaces.
15
Part NumberAssembly OIL-HAYP-7000-HC00-W01
HAY PULLEY 7” (HOWCO STYLE)
Aluminum Part Number.092" Assembly OIL-HAYP-1200-092-W01.108" Assembly OIL-HAYP-1200-108-W01.187" Assembly OIL-HAYP-1200-187-W01
HAY PULLEY 12”
Aluminum Part Number.092" Assembly OIL-HAYP-1600-092-W01.108" Assembly OIL-HAYP-1600-108-W01.187" Assembly OIL-HAYP-1600-187-W01
HAY PULLEY 16”
16
LUBRICATORS
PurposeTo accommodate downhole wireline tool strings while rigging up, and duringwireline operations, as well as when entering the wellbore and returning tosurface.
DescriptionThe Lubricator is made of 7 components:1. Hand Union Female2. Lubricator Tube3. Ported Sub4. Hand Union Male5. Nut6. O-Ring7. O-RingThe lubricator is made up of sections of tubing material threaded on bothends to accept hand unions. Once they are made up with hand unions theyare known as lubricator joints, and come in 8 or 10 foot lengths.Standard lubricator sizes on slickline service units are 2.875 and 3.50 inchesOD (outside diameter). Lubricator sizes are also available up to 7” OD.Sour service or NACE spec. lubricator joints are machined from Sour servicestock material, where the upper and lower hand unions are machined as partof the lubricator joint or maybe made with sealed premium threadconnections.
An optional bleed sub may be incorporated into the lubricator assembly. Thisinvolves a ported .50” NPT sub between the lubricator tube and the bottomhand union.-
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Length• Union Type• Working Pressure• If bleed-off port is required• Service type
17
LUBRICATOR SECTIONS
SERVICE I.D. (INCH) W.P (PSI) 4 FEET 6FEET
STD 2.50 5,000 OIL-LUBS-2500-5K4F-W01 OIL-LUBS-2500-5K6F-W01STD 3.00 5,000 OIL-LUBS-3000-5K4F-W01 OIL-LUBS-3000-5K6F-W01STD 2.50 10,000 OIL-LUBS-2500-10K4F-W01 OIL-LUBS-2500-10K6F-W01STD 3.00 10,000 OIL-LUBS-3000-10K4F-W01 OIL-LUBS-3000-10K6F-W01H2S 2.50 5,000 OIL-LUBH-2500-5K4F-W01 OIL-LUBH-2500-5K6F-W01H2S 3.00 5,000 OIL-LUBH-3000-5K4F-W01 OIL-LUBH-3000-5K6F-W01H2S 2.50 10,000 OIL-LUBH-2500-10K4F-W01 OIL-LUBH-2500-10K6F-W01H2S 3.00 10,000 OIL-LUBH-3000-10K4F-W01 OIL-LUBH-3000-10K6F-W01STD 2.50 15,000 OIL-LUBS-2500-15K4F-W01 OIL-LUBS-2500-15K6F-W01H2S 2.50 15,000 OIL-LUBH-2500-15K4F-W01 OIL-LUBH-2500-15K6F-W01H2S 3.00 15,000 OIL-LUBH-3000-15K4F-W01 OIL-LUBH-3000-15K6F-W01STD 4.00 5,000 OIL-LUBS-4000-5K4F-W01 OIL-LUBS-4000-5K6F-W01H2S 4.00 5,000 OIL-LUBH-4000-5K4F-W01 OIL-LUBH-4000-5K6F-W01STD 4.00 10,000 OIL-LUBS-4000-10K4F-W01 OIL-LUBS-4000-10K6F-W01H2S 4.00 10,000 OIL-LUBH-4000-10K4F-W01 OIL-LUBH-4000-10K6F-W01
H2S 4.00 15,000 OIL-LUBH-4000-15K4F-W01 OIL-LUBH-4000-15K6F-W01STD 5.00 5,000 OIL-LUBS-5000-5K4F-W01 OIL-LUBS-5000-5K6F-W01STD 5.00 10,000 OIL-LUBS-5000-10K4F-W01 OIL-LUBS-5000-10K6F-W01H2S 5.00 5,000 OIL-LUBH-5000-5K4F-W01 OIL-LUBH-5000-5K6F-W01H2S 5.00 10,000 OIL-LUBH-5000-10K4F-W01 OIL-LUBH-5000-10K6F-W01STD 6.38 5,000 OIL-LUBS-6380-5K4F-W01 OIL-LUBS-6380-5K6F-W01H2S 6.38 5,000 OIL-LUBH-6380-5K4F-W01 OIL-LUBH-6380-5K6F-W01H2S 6.38 10,000 OIL-LUBH-6380-10K4F-W01 OIL-LUBH-6380-10K6F-W01
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Length (Lubricator)• Union Type• Working Pressure• If bleed-off port is required (Lubricator)• Service type
18
LUBRICATOR SECTIONS
SERVICE I.D. (INCH) W.P (PSI) 8 FEET 10FEET
STD 2.50 5,000 OIL-LUBS-2500-5K8F-W01 OIL-LUBS-2500-5K10F-W01STD 3.00 5,000 OIL-LUBS-3000-5K8F-W01 OIL-LUBS-3000-5K10F-W01STD 2.50 10,000 OIL-LUBS-2500-10K8F-W01 OIL-LUBS-2500-10K10F-W01STD 3.00 10,000 OIL-LUBS-3000-10K8F-W01 OIL-LUBS-3000-10K10F-W01H2S 2.50 5,000 OIL-LUBH-2500-5K8F-W01 OIL-LUBH-2500-5K10F-W01H2S 3.00 5,000 OIL-LUBH-3000-5K8F-W01 OIL-LUBH-3000-5K10F-W01H2S 2.50 10,000 OIL-LUBH-2500-10K8F-W01 OIL-LUBH-2500-10K10F-W01H2S 3.00 10,000 OIL-LUBH-3000-10K8F-W01 OIL-LUBH-3000-10K10F-W01STD 2.50 15,000 OIL-LUBS-2500-15K8F-W01 OIL-LUBS-2500-15K10F-W01H2S 2.50 15,000 OIL-LUBH-2500-15K8F-W01 OIL-LUBH-2500-15K10F-W01H2S 3.00 15,000 OIL-LUBH-3000-15K8F-W01 OIL-LUBH-3000-15K10F-W01STD 4.00 5,000 OIL-LUBS-4000-5K8F-W01 OIL-LUBS-4000-5K10F-W01H2S 4.00 5,000 OIL-LUBH-4000-5K8F-W01 OIL-LUBH-4000-5K10F-W01STD 4.00 10,000 OIL-LUBS-4000-10K8F-W01 OIL-LUBS-4000-10K10F-W01H2S 4.00 10,000 OIL-LUBH-4000-10K8F-W01 OIL-LUBH-4000-10K10F-W01
H2S 4.00 15,000 OIL-LUBH-4000-15K8F-W01 OIL-LUBH-4000-15K10F-W01STD 5.00 5,000 OIL-LUBS-5000-5K8F-W01 OIL-LUBS-5000-5K10F-W01STD 5.00 10,000 OIL-LUBS-5000-10K8F-W01 OIL-LUBS-5000-10K10F-W01H2S 5.00 5,000 OIL-LUBH-5000-5K8F-W01 OIL-LUBH-5000-5K10F-W01H2S 5.00 10,000 OIL-LUBH-5000-10K8F-W01 OIL-LUBH-5000-10K10F-W01STD 6.38 5,000 OIL-LUBS-6380-5K8F-W01 OIL-LUBS-6380-5K10F-W01H2S 6.38 5,000 OIL-LUBH-6380-5K8F-W01 OIL-LUBH-6380-5K10F-W01H2S 6.38 10,000 OIL-LUBH-6380-10K8F-W01 OIL-LUBH-6380-10K10F-W01
Part Number2" Assembly OIL-LUBC-2000-0000-W012 1/2" Assembly OIL-LUBC-2500-0000-W013" Assembly OIL-LUBC-3000-0000-W01
LUBRICATOR CLAMPPlease Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Length (Lubricator)• Union Type• Working Pressure• If bleed-off port is required (Lubricator)• Service type
19
PUMP-IN SUB W/ WECO UNION
Part Number
3" ID - 5M w/ 4 3/4"-4 Weco (screwed inside) OIL-PISB-3000-5MSI-W01
3" ID - 10M (1-pc.) w/ 4 3/4"-4 union -Integral WECO f/ union OIL-PISB-3000-10MIW-W01
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type
20
QUICK UNION
Type "B“ Part Number2 1/2" Assembly 4 3/4"-4 (3"ID) OIL-QKUB-2500-4750-4-W013" Double Lead Assembly - 5 1/2"-4 x 2 OIL-QKUB-3000-5500-4-W01
Type "O"5" x 4" Assembly OIL-QKUO-5000-4000-W01
COMPONENTSPin Section - 2 3/8" EUE ConnectionPin Section - 2 7/8" EUE ConnectionPin Section - 3 1/2" NU ConnectionPin Section - 3 1/2" LP ConnectionThreaded Half - 2 3/8" EUE connectionThreaded Half - 2 7/8" EUE ConnectionThreaded Half - 3 1/2" NU ConnectionThreaded Half - 3 1/2" LP ConnectionNutBlanking Cap AssemblyO-ring
Please Specify The following When Ordering this Equipment:
• ID (Inner Diameter)• Union Type• Type
21
RISER – DUAL .5” NPT
PurposeGives the ability to either pump into / or bleed off wellbore pressure.
DescriptionThe Riser consists of 3 components:1. Riser Body2. Hand Nut3. Bottom Union
The Riser incorporates two .5” NPT ports to allow the bleed off, or injectionof wellbore gasses or liquids.
PrecautionsEnsure threads are not worn or damaged.
Part NumberAssembly OIL-RSDU-5000-NPT0-W01
COMPONENTSRiser BodyHand NutBottom Union
22
STUFFING BOX
PurposeControls the running of slickline into the lubricator and down the wellboreand contains any well pressure that may exist.
DescriptionThe sheave wheel is supported with bearings and spindle between twoarms.
The two arms are attached to the staff and held in place at the top with thewire guide when bolted into place. The staff mounts on top of the mainbody with an upper and lower bearing. This assembly is held in place withthe hydraulic packing adapter nut.
The packing and packing glands are contained in the body, all having a holein the center for the wire to pass through.
The stuffing box is attached to the top of the lubricator with a hand union.
Please Specify The following When Ordering this Equipment:
• Union Type• Working Pressure• Line Size• Hose Length
Part Number5000 PSI WP Assembly OIL-SFBX-0000-5K00-W01
10,000 PSI WP Assembly OIL-SFBX-0000-10K0-W01
15,000 PSI WP Assembly OIL-SFBX-0000-15K0-W01(less staff assembly)
COMPONENTSBody OLG-G-15-901446Union Nut OLG-G-15-901546Packing Nut OLG-G-15-901146Upper Packing Gland OLG-G-15-901046Lower Packing Gland OLG-G-15-900946Packing OLG-G-15-435691Blow Out Plug OLG-G-15-900746Blow Out Plug Retainer OLG-G-15-900846Staff Jam Nut OLG-G-15-901246
23
TOOL CATCHERPurposeProvides a method of capturing the tool string in the event that the slickline / wireline is separated from therope socket / cable head during wireline operations where the tools may come into forceful contact withthe bottom ofstuffing box or packoff / control head assembly. (i.e.: crowning out).
The tool catcher also comes with a integral velocity check valve, meaning the in the case that the wireline isparted and travels through the stuffing box / control head, the wellbore is contained through the use of aone way checkvalve.
DescriptionDesigned to be install directly beneath a stuffing box / control head in lubricator string.
Hydraulically controlled so as to be manipulated remotely via a hand pump during wireline operations.
Capable of capturing up to and including 1.75” fishing necks.
Integral velocity check valve to prevent wellbore gases or fluids from escaping to the atmosphere in theevent that the slickline / wireline is pulled free of the stuffing box / control head during wireline operations.
The Tool Catcher consists of two main assemblies:1. The catcher assembly.2. The velocity check valve assembly.
Please Specify The following When Ordering this Equipment:
• Union Type• Working Pressure• Hose Length
Part Number3.50” Assembly OIL-TCAT-3500-0000-W01Top Sub OIL-TCAT-3500-TS00-W01Piston Spring OIL-TCAT-3500-PS00-W01Upper Spring Retainer OIL-TCAT-3500-USR0-W01Collect Spring OIL-TCAT-3500-CS00-W01Collect Actuator OIL-TCAT-3500-CA00-W01Hydraulic Piston OIL-TCAT-3500-HP00-W01Spring Stop Washer OIL-TCAT-3500-SSW0-W01Lower Spring Retainer OIL-TCAT-3500-LSR0-W01Collect OIL-TCAT-3500-CL00-W01Bottom Sub OIL-TCAT-3500-BS00-W01Protector Arm OIL-TCAT-3500-PA00-W01Retainer (VCV) OIL-TCAT-3500-RE00-W01
Hand Union Female OIL-TCAT-3500-HUF0-W01Hand Union Male OIL-TCAT-3500-HUM0-W01Hand Union Nut OIL-TCAT-3500-HUN0-W01Ball Bearing 0.75”O-Ring 224Allen Cap Screws ½” unc x ¾”VCV Assembly OIL-TCAT-3500-VCVA-W01O-Ring 337O-Ring 340 (x2)O-Ring 338 (x2)O-Ring 237 (x2)
24
WELLHEAD SWEDGES
Part Number2.00” Assembly OIL-WHSG-2000-LP00-W013.00” Assembly OIL-WHSG-3000-LP00-W01
PurposeConnects wireline surface equipment to wellhead.
DescriptionThe lower end of the swage connection is either threaded orflanged to fit the wellhead. The upper end of the swage iscompatible to the bottom hand union of the BOP.
Standard thread sizes of swage connections carried on slicklineunits are: 2 and 3 inch line pipe, 2 3/8, 2 7/8 and 3 1/2 inch EUE.
EUE threads have pressure ratings the same as that of standardwireline surface equipment.
Line Pipe
EUE
Part Number2.375” Assembly OIL-WHSG-2375-EUE0-W012.875” Assembly OIL-WHSG-2875-EUE0-W013.50” Assembly OIL-WHSG-3500-EUE0-W013.875” Assembly OIL-WHSG-3875-EUE0-W01
Casing
Part Number4.50” Assembly OIL-WHSG-4500-CSG0-W015.50” Assembly OIL-WHSG-5500-CSG0-W01
Please Specify The following When Ordering this Equipment:
• Union Type• Working Pressure
25
8" (US Measure) PART NUMBER.082" - .092" OIL-CHAS-082-092U-W01
.105" - .125" OIL-CHAS-105-125U-W01
.187" - .218" OIL-CHAS-187-218U-W01
8" (Metric).092" OIL-CHAS-082-092M-W01
.105" - .125" OIL-CHAS-105-125M-W01
.187" - .218" OIL-CHAS-187-218M-W01
* Right Angle Drive and Counter not included
8" Counter Head Frame OIL-CHFR-8000-0000-W01
16" Counter Head Frame OIL-CHFR-1600-0000-W01
Right Angle Drive 1:1 Ratio OIL-RADR-1010-0000-W01
Right Angle Drive 1:2 Ratio OIL-RADR-1020-0000-W01
COUNTER HEAD ASSEMBLY
26
STAFF ASSEMBLY
Part Number7" Sheave Assembly OIL-STFA-7000-0000-W0110" Sheave Assembly OIL-STFA-1000-0000-W0116" Sheave Assembly OIL-STFA-1600-0000-W01
COMPONENTSStaffSheaveSheave BearingSheave BoltWasherGuardStaff Bearing
28
SUCKER ROD PIN X BOX CHASER
Part Number5/8" S.R. Assembly OIL-SRPXB-0625-SR00-W01
3/4" S.R. Assembly OIL-SRPXB-0750-SR00-W01
4 Way Combination OIL-SRPXB-4WY-0000-W01
HYDRAULIC LINE WIPER SWAB HEAD
29
VEEDER ROOT
Part NumberDirect Drive OIL-DTDR-0000-0000-W01Cable Drive OIL-CBDR-0000-0000-W01
WEIGHT INDICATOR
Part Number0 - 2000# OIL-WTIN-2000-0000-W010 - 4000# OIL-WTIN-4000-0000-W010 - 5000# OIL-WTIN-5000-0000-W01
Weight Indicator Pump* Hose Not Included
30
COUNTER WHEELS
PRESSURE WHEELS
8" Part Number.082" (US Measure) OIL-CTWH-8000-082U-W01.092" (US Measure) OIL-CTWH-8000-092U-W01.105" (US Measure) OIL-CTWH-8000-105U-W01.108" (US Measure) OIL-CTWH-8000-108U-W01.125" (US Measure) OIL-CTWH-8000-125U-W01.187" (US Measure) OIL-CTWH-8000-187U-W01.082" (Metric) OIL-CTWH-8000-082M-W01.092" (Metric) OIL-CTWH-8000-092M-W01.105" (Metric) OIL-CTWH-8000-105M-W01.108" (Metric) OIL-CTWH-8000-108M-W01.187" (Metric) OIL-CTWH-8000-187M-W01
16".092" (US Measure) OIL-CTWH-1600-092U-W01.105" (US Measure) OIL-CTWH-1600-105U-W01.108" (US Measure) OIL-CTWH-1600-108U-W01.125" (US Measure) OIL-CTWH-1600-125U-W01.187" (US Measure) OIL-CTWH-1600-187U-W01.218" (US Measure) OIL-CTWH-1600-218U-W01.092" (Metric) OIL-CTWH-1600-092M-W01.105" (Metric) OIL-CTWH-1600-105M-W01.108" (Metric) OIL-CTWH-1600-108M-W01.125" (Metric) OIL-CTWH-1600-125M-W01.187" (Metric) OIL-CTWH-1600-187M-W01.218" (Metric) OIL-CTWH-1600-218M-W01
HOWCO Part Number.082" OIL-PWHC-0000-082-W01.092" OIL-PWHC-0000-092-W01.105" OIL-PWHC-0000-105-W01.108" OIL-PWHC-0000-108-W01.125" OIL-PWHC-0000-125-W01.187" OIL-PWHC-0000-187-W01
MATHEY.082" OIL-PWMT-0000-082-W01.092" OIL-PWMT-0000-092-W01.105" OIL-PWMT-0000-105-W01.108" OIL-PWMT-0000-108-W01.125" OIL-PWMT-0000-125-W01.187" OIL-PWMT-0000-187-W01
31
PART NUMBERAssembly OIL-GNPL-0000-0000-W01
PART NUMBERAssembly OIL-GNPL-STEP-0000-W01
GIN POLE
GIN POLE STEP
32
RELEASING TOOL
Part Number2" OIL-RLT-2000-0000-W01
2 1/2" OIL-RLT-2500-0000-W01
3" OIL-RLT-3000-0000-W01
4" OIL-RLT-4000-0000-W01
33
PACKING
Part NumberBK Packing OLG-G-17-435191BK Teflon Ring OLG-G-17-435291RD Lower Packing OLG-G-17-434891RD Lower Teflon Ring OLG-G-17-434991RD Upper Packing OLG-G-17-435391RD Upper Teflon Ring OLG-G-17-43549191V38 (2.188" T) OIL-PK91V-3800-2188T-W0191V64 (2.875" S) OIL-PK91V-6400-2875S-W0191V172 - Prong Packing OIL-PK91V-1720-PRPK-W0191V310 (1.781") OIL-PK91V-3100-1781-W0191V318 (2.313") OIL-PK91V-3180-2313-W0191V320 (3.813" X) OIL-PK91V-3200-3813X-W0191V345 (1.250") OIL-PK91V-3450-1250-W0191V346 (1.625") OIL-PK91V-3460-1625-W0191V347 (1.500") OIL-PK91V-3470-1500-W0191V366 (2.750" T) OIL-PK91V-3660-2750-W0191V1214 (1.710" R) OIL-PK91V-1214-1710R-W0191V1216 (2.188" R) OIL-PK91V-1216-2188R-W0191V1330 (2.813" X) OIL-PK91V-1330-2813X-W0191V3308 OIL-PK91V-3308-0000-W0191V3306 (2" V-Packing) OIL-PK91V-3306-2VPK-W0191V3310 (2 1/2" V-Packing) OIL-PK91V-3310-25VP-W0191V3376 (2.750" X) OIL-PK91V-3376-2750X-W0191V3380 (2.125" R) OIL-PK91V-3380-2121R-W0191V3385 (2.562") OIL-PK91V-3385-2562-W011.78" Baker OIL-BPK-1780-C000-W011.81" Baker OIL-BPK-1810-C000-W011.87" Baker OIL-BPK-1870-C000-W012.25" Baker OIL-BPK-2250-C000-W012.750" Baker OIL-BPK-2750-C000-W012.31" Baker OIL-BPK-2310-C000-W012.81" Baker OIL-BPK-2810-C000-W012.25" Camco OIL-CMPK-2250-C000-W011.81" Camco OIL-CMPK-1810-C000-W01
34
PACKING
Part Number
Low Pressure Stuffing Box Packing OIL-LPSBP-0000-C000-W01
High Pressure Stuffing Box Packing OIL-HPSBP-0000-C000-W01High Temperature Packing1.710" PR Prong OIL-PKPRP-1710-C000-W012.125" PR Prong OIL-PKPRP-2125-C000-W012.188" PR Prong OIL-PKPRP-2188-C000-W011.710" Locking Mandrel OIL-PKLM-1710-C000-W011.875" Locking Mandrel OIL-PKLM-1875-C000-W012.125" Locking Mandrel OIL-PKLM-2125-C000-W012.188" Locking Mandrel OIL-PKLM-2188-C000-W012.313" Locking Mandrel OIL-PKLM-2313-C000-W012.562" Locking Mandrel OIL-PKLM-2562-C000-W012.750" Locking Mandrel OIL-PKLM-2750-C000-W012.813" Locking Mandrel OIL-PKLM-2813-C000-W01BK Packing OIL-BKPK-0000-C000-W01
35