HIGH-POWERED I/OALL-IN-ONE PACKAGE: J1939 DIAGNOSTICS AND AUTO-FEED CONTROLS FOR THE ARBOR INDUSTRY

► “One Touch” auto-feed settings for optimal chipper performance (Factory, Brush, Wood, Custom)

► High-Powered I/O Design

► For Diesel and Alternative Fuels (Gas, LP, CNG)

► Environmentally Sealed - For Harsh, High-Vibration, All-Weather Applications

► Improves User Functionality

► All-In-One Package Improves Machine Aesthetics

W W W . I N D E L E C O N . C O M

NOTHING COMPARES.

SUITABLE FOR ALL COMBUSTION ENGINES, INCLUDING DIESEL

4 “One Touch” auto-feed settings

Fully controls auto-feed functions

Dual user configurable quad display

Multi-level programming access

Smart machine/system diagnostics on I/O screens

Displays SAE J1939 parameters

Tier IV and Stage IIIB/IV compliant

J1939 fault logging and display of active faults

Controls throttle via J1939

PWM capable

The iQ-View2TM is a smart display and controller that presents engine and machine parameters to the operator as well as controls the auto-feed function on chippers and grinders. As a display unit, the user can select four parameters to display simultaneously. A second screen can be set to display four additional parameters. Either screen can easily be selected for viewing.

The iQ-View2TM allows the operator to select from 1 of 4 “One Touch” auto-feed settings with the press of a button (Factory, Brush, Wood, Custom). “One Touch” settings help eliminate chipper jams for the user and eliminates unnecessary service calls for the manufacturer. Each setting is designed to optimize chipper efficiency and improve output.

Machine and system diagnostic LEDs display prominently along the side of the unit.

The iQ-View2TM complies with Tier IV and Stage IIIB/IV meeting the latest requirements including regeneration.

Password protected multi-level menu controls setup.

The iQ-View2TM configures without a computer.

Specific I/O for extra functionality, such as auto-feed control for chippers, electronic clutches, and many more.

Typical Display Parameters

Specifications

Dimensions

• Engine RPM• Fuel Rate• Coolant Temperature• Catalyst Level• Transmission Oil Pressure• Engine Configuration• Engine Hours

• Engine Configuration• Fuel Economy• Throttle Position• Manifold Air Temperature • Transmission Oil Temp• Stored Service Codes• Oil Pressure• System Voltage

• % Engine Load• Service Codes• Gear Position• % Soot• % Ash• Exhaust Filter Outlet Temp • Non-Canbus Parameters

• Operating Voltage 8-32 VDC• Reverse Polarity Protection• Load Dump Protection• Operating Temperature -40°C to +85°C (-40°F to 185°F)• IP67 and IP69K front and back, IP66 Panel Seal with Gasket• Polycarbonate/ABS Construction

• Power Requirement 117mA @12VDC• 3 Relay Outputs: 10A, SPDT, Form C (30 VDC @ 10A max.), 40A max aggregate @ 85C• 2 Low-side Outputs (1A)• 2 High-side Outputs(1A)• 1 Dedicated Alternator Excite (provides Charge Fail Fault if unable to excite alternator)• 5 Digital inputs, configurable (high/low)

• 3 Analog inputs, configurable (4-20mA, 0-5V, resistive)• 1 Frequency input, supporting Magnetic pickup (30Hz - 10kHz, 2.0VAC-120VAC) or Alternator input (30Hz - 10kHz, 4.5 VRMS - 90 VRMS)• 1 CAN J1939• 1 RS485, MODBUS RTU• EMI/RFI: SAE J1113

• iQ-Voltage• Engine RPM Sensor (Mag Pickup/Alternator Required)• Feed direction• iQ-View Hours• And Many More

• Shock: ± 50G in axes• Vibration: Random, 7.86 Grms (5-2000Hz), 3 axes• Gray Connector DT06- 12SA-P012• Black Connector DT06- 12SB-P012• Green Connector DT06- 12SC-P012• Languages: English, Spanish, German, French, Italian

*All J1939 Display Parameters Available.

HIGH-POWERED I/OIndustrial Electronic Controls (IEC) has been serving OEM needs for over fifteen years and has earned a reputation for

exceeding customer expectations with industrially rugged designs, on time delivery and unsurpassed quality control.

Whether solving a specific application need, presenting value-added cost reduction ideas without compromising design

integrity or supporting day to day quality and delivery objectives, IEC is up for the challenge.

For more product information, contact:

4689 Stenstrom Rd, Rockford, IL 61109 | 815.873.1980sales@indelecon.com | www. indelecon.com

IEC reserves the right, under its continuous product improvement program, to change construction or design details and specifications without notice and without incurring any obligation.Printed in U.S.A. 01-2021 © 2021 Copyright Industrial Electronic Controls