High-Performance Thermal Imaging Cameras...2019/01/03 · AIRS Delivers Advanced Thermal Imaging...
Transcript of High-Performance Thermal Imaging Cameras...2019/01/03 · AIRS Delivers Advanced Thermal Imaging...
High-PerformanceThermal Imaging
Cameras
• State of the art "HOT" high operating temperature cryo IRFPAs
• HD and large format; high resolution • OEM cameras - customizable to your needs• Long life linear coolers• Onboard video processing• HDMI output or Camera Link• Low size, weight and power (SWAP)
www.boselec.com | [email protected] | 617-566-3821
HD hi-Nyx HOT MWIR Camera 1280 x 1024 format HOT MWIR Thermal Imaging Camera
• 12 micron pixel HOT MWIR ( Type II SLS, nBn)• State of the art "HOT" operating temperature IRFPA
• Long life linear cooler• OEM large format high resolution camera• Onboard video processing• HDMI output or Cameralink• Low size, weight and power (SWAP) - compact, flexible package
Al s AMERICAN INFRARED SOWTIONS
www.boselec.com | [email protected] | 617-566-3821
hi-Nyx HD
IR FOCAL PLANE ARRAY
Sensor Type
Array Format
Pixel Pitch
IRFPA Spectral Band
Sensitivity N ETD
Framerate
AIRS Delivers Advanced Thermal Imaging AIRS' cameras and integrated detector cooler assemblies (IDCA) offer high
performance LWIR, MWIR and SWIR imaging utilizing state of the art MCT,
nBn, lnSb or T2SLS IRFPAs. The sensitivity and resolution of the hi-Nyx series can
meet the most demanding imaging needs. State of the art technologies,
designs, and vertically integrated manufacturing allow AIRS to provide
system integrators advanced, mission-critical imaging capability.
SPLIT LINEAR COOLER
HOT MWIR: T2SLS, nBn
1280 (h) x l 024 (v)
MT TF
Cool Down Time @ 23 C
> 20,000 hours
< 10 minutes to 120°K
Or other windowed format
l2µm
2 - 5µm MWIR
25 mK typical
60hz
ELECTRICAL
Voltage 12 V nominal
Power Dissipation @ 23 °C 5.5 Watts typical steady state
6.5 Watts max power
MECHANICAL LENS AND OPTICAL INTERFACE
Cold shield f/3 Full camera with 25mm lens and onboard video processing
Lens
FOV
25mm
43 deg
Dimensions (I x w x h) 5"x4"x3 " (Excluding Lens)
Weight 3 lb 6oz (Including 25mm Lens)
Cold Filter Bandpass 3µm LP typical ENVIRONMENTAL
Operating Temperature
Internal dewar optics and components can be customized to storage Temperaturecustomer specifications
Coldshield f/l -f/6 VIDEO
Cold Filter Bandpass Specified bandpass or none HDMI or Camera Link output
-40°C to +60°C
-50C0 to +70C0
CAMERA CAPABILITIES (DRI SPECIFICATIONS)
HD hi-Nyx Camera With 25mm Lens (as shown)
25mm Lens Detect Recognise
Human 0.86 km 0.27 km
Vehicle 2.27 km 0.75 km
Identify
0.13 km
0.36 km
AIRS HD hi-Nyx Camera With l 00mm Lens (available)
Al AMERICAN INFRARED SOWTIONS
One Wall Street (662) 626-2477
100mm Lens
Human
Vehicle
Hudson, NH 03051 www.go-airs.com
Detect Recognise Identify
3.05 km l.01 km 0.48km
6.98 km 2.70 km 1.39 km
0414 SUBJECTTOCHANGE
mini-Nyx HOT MW Advanced Thermal Imaging Camera 640 x 512 MWIR
• OEM large format, high resolution camera• Higher performance in demanding environments• HOT Type II Strained Layer Superlattice (T2SLS) or HOT Mercury Cadmium
Telluride (MCT) MWIR cooled IRFPA• Superior temperature sensitivity• State of the art “HOT” operating temperature IRFPA
for longer cooler life
Infrared camera technology is controlled under the International Traffic in Arms Regulations (ITAR) and may not be sent outside the US, or made available to a foreign person wherever located, except in accordance with the ITAR and as approved by the US Government. We follow the ITAR and so must you.
One Wall Street (662) 626-2477Hudson, NH 03051 www.go-airs.com
www.go-airs.com/dri
0115 SUBJECT TO CHANGE
mini-Nyx HOT MW
5.8
DETECTION (km) 20° FOV, f/4; 23km rural visibility
2.81.0
IR FOCAL PLANE ARRAY Sensor Type HOT Type-2 SLS or HOT MCT
Array Format 640 (h) x 512 (v)
Pixel Pitch 15 μm
Spectral Band 3 – 5 μm
Sensitivity NETD 28 mK @ f/4.0 typical
OPTICALLens - EFL, FOV, F/# 25 mm, 22°, f/4.0
Focus Range 1m - ∞
Imaging Spectral Band MWIR (3.4 – 5 μm)
COOLER – SPLIT LINEAR MTTF > 20,000 hours
Cool Down Time @ 25C 6 minutes to 130°K
VIDEO Frame Rate 60 Hz
Analog Output NTSC
Digital Output Camera Link or optional Gig-E
DIMENSIONS
COMMUNICATION Serial Interface RS-232/RS-422/USB
ELECTRICAL Voltage 12 VDC
Power Dissipation @ 25°C 10 Watts typical steady state
MECHANICAL Dimensions (LxWxH) 7.12 x 3.16 x 4.07 in.
Weight 2.8 lbs.
Camera Mount standard 1/4”-20
ENVIRONMENTAL Operating Temperature -40°C to +50°C
Storage Temperature -50°C to +70°C
IMAGERY DISPLAY OPTION IRIG-B Date/Time Stamp
AIRS Delivers Advanced Thermal ImagingAIRS’ infrared cameras offer large format, high-performance LWIR, MWIR and SWIR imaging utilizing state of the art MCT and T2SLS IRFPAs. The sensitivity and resolution of the Nyx series can meet the most demanding imaging needs. State of the art technologies, designs, and vertically integrated manufacturing allow AIRS to provide system integrators advanced, mission-critical imaging capability.
Nyx HD-L Advanced Thermal Imaging Camera HD 1024 x 720 LWIR
• OEM large format, high resolution camera• Higher performance in demanding environments• Type II Strained Layer Superlattice (T2SLS) LWIR cooled IRFPA• Superior temperature sensitivity• Designed for ease of integration into gimbal payloads,
multi-sensor platforms and camera systems• First purpose-built tactical T2SLS camera
Infrared camera technology is controlled under the International Traffic in Arms Regulations (ITAR) and may not be sent outside the US, or made available to a foreign person wherever located, except in accordance with the ITAR and as approved by the US Government. We follow the ITAR and so must you.
One Wall Street (662) 626-2477Hudson, NH 03051 www.go-airs.com
www.go-airs.com/dri
0414 SUBJECT TO CHANGE
Nyx HD-L
19.7
DETECTION (km) 6° FOV, f/3; 23km rural visibility
14.35.2
IR FOCAL PLANE ARRAY Sensor Type Type-2 SLS
Array Format 1024 (h) x 1024 (v)
Pixel Pitch 18 μm
Spectral Band Broadband (3 – 10 μm)
Sensitivity NETD 25 mK @ f/3.0
OPTICALBaseline Lens - EFL, FOV, F/# 176mm, 6°, f/3.0
Focus Range 5m - ∞
Imaging Spectral Band LWIR (7.5 – 10 μm)
COOLER – SPLIT LINEAR US ARMY B-2 QUALIFIED MTTF > 10,000 hours
Cool Down Time @ 25C 8 minutes to 77°K
VIDEO Frame Rate 60 Hz
Analog Output SMPTE 720 (1024 x 720) NTSC or PAL
Digital Output Ethernet H.264, 14 bit Camera Link or GIG-E
COMMUNICATION Serial Interface RS-232/RS-422/USB
ELECTRICAL Voltage 12 VDC and 28 VDC
Power Dissipation @ 25°C 23 Watts typical steady state
MECHANICAL (WITH 6° LENS) Dimensions (LxWxH) 11.33 x 3.58 x 5.15 in.
Weight 5.7 lbs.
Camera Mount standard 1/4”-20
ENVIRONMENTAL Operating Temperature -40°C to +50°C
Storage Temperature -50°C to +70°C
OBJECTIVE LENS OPTIONS 18 mm focal length 40° FOV
527 mm focal length 2° FOV
Other focal lengths Available
IMAGERY DISPLAY OPTION IRIG-B Date/Time Stamp
AIRS Delivers Advanced Thermal ImagingAIRS’ infrared cameras offer large format, high-performance LWIR, MWIR and SWIR imaging utilizing state of the art MCT and T2SLS IRFPAs. The sensitivity and resolution of the Nyx series can meet the most demanding imaging needs. State of the art technologies, designs, and vertically integrated manufacturing allow AIRS to provide system integrators advanced, mission-critical imaging capability.
Nyx HD-M Advanced Thermal Imaging Camera HD 1024 x 720 MWIR
• OEM large format, high resolution camera• Higher performance in demanding environments• Type II Strained Layer Superlattice (T2SLS) MWIR cooled IRFPA• Superior temperature sensitivity• State of the art “HOT” operating temperature IRFPA
for longer cooler life• First purpose-built tactical T2SLS camera
Infrared camera technology is controlled under the International Traffic in Arms Regulations (ITAR) and may not be sent outside the US, or made available to a foreign person wherever located, except in accordance with the ITAR and as approved by the US Government. We follow the ITAR and so must you.
One Wall Street (662) 626-2477Hudson, NH 03051 www.go-airs.com
www.go-airs.com/dri
0414 SUBJECT TO CHANGE
Nyx HD-M
19.7
DETECTION (km) 6° FOV, f/3; 23km rural visibility
14.35.2
IR FOCAL PLANE ARRAY Sensor Type HOT Type-2 SLS
Array Format 1024 (h) x 1024 (v)
Pixel Pitch 18 μm
Spectral Band (3 – 5 μm)
Sensitivity NETD 25 mK @ f/4.0
OPTICALBaseline Lens - EFL, FOV, F/# 100mm, 10°, f/4.0
Focus Range 5m - ∞
Imaging Spectral Band MWIR (3 – 5 μm)
COOLER – SPLIT LINEAR US ARMY B-2 QUALIFIED MTTF > 10,000 hours
Cool Down Time @ 25C 8 minutes to 77°K
VIDEO Frame Rate 60 Hz
Analog Output SMPTE 720 (1024 x 720) NTSC or PAL
Digital Output Ethernet H.264, 14 bit Camera Link or GIG-E
COMMUNICATION Serial Interface RS-232/RS-422/USB
ELECTRICAL Voltage 12 VDC and 28 VDC
Power Dissipation @ 25°C 20 Watts typical steady state
MECHANICAL (WITH 6° LENS) Dimensions (LxWxH) 11.33 x 3.58 x 5.15 in.
Weight 5.7 lbs.
Camera Mount standard 1/4”-20
ENVIRONMENTAL Operating Temperature -40°C to +50°C
Storage Temperature -50°C to +70°C
OBJECTIVE LENS OPTIONS 18 mm focal length 40° FOV
527 mm focal length 2° FOV
Other focal lengths Available
IMAGERY DISPLAY OPTION IRIG-B Date/Time Stamp
AIRS Delivers Advanced Thermal ImagingAIRS’ infrared cameras offer large format, high-performance LWIR, MWIR and SWIR imaging utilizing state of the art MCT and T2SLS IRFPAs. The sensitivity and resolution of the Nyx series can meet the most demanding imaging needs. State of the art technologies, designs, and vertically integrated manufacturing allow AIRS to provide system integrators advanced, mission-critical imaging capability.
mini-Nyx-S 640 Hyperspectral Smart IDCA 640 x 512 Extended Wavelength SWIR
• OEM integrated detector cooler assembly (IDCA)• Extended wavelength (0.9 - 2.5um) high performance IRFPA• AIRS customized optical interface, hyperspectral filter mounting and packaging• Smart IDCA - A/D and uncorrected Camera Link video interface• High resolution 15 um pixel• Designed for ease of integration into hyperspectral
instruments, gimbal payloads, and other OEM systems
One Wall Street (662) 626-2477Hudson, NH 03051 www.go-airs.com
Infrared camera technology is controlled under the International Traffic in Arms Regulations (ITAR) and may not be sent outside the US, or made available to a foreign person wherever located, except in accordance with the ITAR and as approved by the US Government. We follow the ITAR and so must you.
03.15 SUBJECT TO CHANGE
IR FOCAL PLANE ARRAYSensor Type MCT
Array Format 640 (h) x 512 (v)
Pixel Pitch 15 μm
IRFPA Spectral Band Extended SWIR (0.9- 2.5 μm)
FPA Operating Temperature 180°K typical
OPTICAL INTERFACE (CUSTOMIZABLE) Cold shield matched for system design
Cold Filter Bandpass per customer requirements
Hyperspectral options order blocking or sorting filter mounted in dewar cold space to customer requirements
COOLER – INTEGRAL STIRLINGIntegral Stirling K561 or other
MTTF > 10,000 hours
Split Stirling Optional
READ OUT INTEGRATED CIRCUIT (ROIC) Modes Snapshot in IWR (Integrate While Read, ITR (Integrated Then Read) or RS (Rolling Shutter)
Input Stage Capacitance Transimpedance Amplifier (CTIA)
Sub-frame capability any size in steps 4 hor. and 1 vert.
row deselction for individual lines (e.g. spectral channels)
Outputs 4
Max. Full Frame Rate 100Hz IWR (640x512)
variable (higher) with windowing
ELECTRICALVoltage 12 VDC and 5 VDC
Power Dissipation @ 25°C 4 W typical steady state
COMMAND AND CONTROL ELECTRONICSCommunications RS-232
Video Output Uncorrected Camera Link
A/D converter 16 bit
Frame Sync external or internal
AIRS Delivers Advanced Thermal ImagingAIRS’ integrated detector cooler assemblies (IDCA) offer medium and large format, high-performance SWIR, MWIR and LWIR imaging utilizing state of the art MCT and T2SLS IRFPAs. The sensitivity and resolution of the Nyx series can meet the most demanding imaging needs. AIRS and AIM are collaborating to leverage AIM’s IRFPA and cryocooler capabiites into AIRS’ advanced sensor products.
mini-Nyx-S 640
About AIRS
Innovative and Flexible - AIRS is an innovative company whose staff has a deep technical and business understanding of infrared imaging applications and technologies. AIRS was founded upon the principles of focused development of state of the art high performance IDCAs, sensors and cameras that utilize leading edge IRFPAs. The team came together from industry based on our collective passion for innovation and challenging, unique solutions for complex, high performance sensor systems.
Vast experience - The AIRS team has a deep understanding and experience in complex IDCA sensor and systems design and manufacturing. The breadth of experience allows the AIRS team to recognize appropriate applications of design, technology and processes to best meet your needs.
Collaborative partner - AIRS’ business model is to be a committed merchant supplier to integrators and designers of EO/IR systems. Our primary focus is on OEM relationships where AIRS can closely collaborate with its customers to help them meet their mission or application requirements.
www.boselec.com | [email protected] | 617-566-3821