HIGH LIFTING CAPACITY AND LOW TARE WEIGHTNew mid-range cranes (16-28 tm) with extra precision and high speed for your daily lifting tasks

POWER TO LIFT

FAST, STRONG AND PRECISEThe new cranes in the mid-range offers the best lift-to-weight ratio within this range. This allows for an optimum utilisation of the crane and the vehicle and thereby an even better business on a daily basis.

The steel quality is ultra-high tensile steel, and all the sub-components are treated either with zinc-nickel or zinc-iron coating. This gives you an optimum corrosion protection of your crane, a perfect finish and a long life span at the same time as all Danish and European environmental standards have been respected.

LOW TARE WEIGHT HIGH LIFTING CAPACITYA stronger and larger base allows for increased lifting capacity and furthermore the cranes have generally been reinforced and optimised to obtain an excellent lift-to-weight ratio.

The cranes have been designed to offer extra space on the vehicle by having the lowest possible dimensions.

On medium range cranes with 5 to 8 extensions, the suspen-sion traverse is even lower than before, which makes stowing of the crane faster and offers more space on the truck body.

150 L HYDRAULIC TANKALLOWS FOR MORE SPACE ON THE VEHICLEThe new 150 l tank fitted on the crane offers more space on the chassis of the vehicle and also ensures that you can work with the crane in a fast and efficient way for a longer period of time without the risk of the oil being over-heated.

NEW DIGITAL SLEWING SENSOROFFERS NEW POSSIBILITIESThe new integrated slewing sensor optimises the reaction from the safety system as the stability area is registered with maximum precision.

POWER STABILIZERNEW STABILIZER SPREADThe HMF 2310 through HMF 2820 models are available with a new, large stabilizer spread of 7.4 m, which offers increased stability, also on rear-mounted cranes.

HMF - POWER TO LIFT

SAFETY FIRST

EVS - THE ORIGINAL VEHICLE STABILITY SYSTEMEVS is a dynamic stability safety system which constantly monitors the stability of the vehicle in all working areas during crane operation. EVS actively incorporates the load on the vehicle, the inclination of the ground, the vehicle heel, the load moment of the crane and its working speed.

EVS increases the working area of the crane by calcula- ting improved stability factors, for instance the load on the truck body and the stabilizer spread.

The system meets the requirements of the EN 12999, which covers safety on loader cranes.

ALTERNATIVE SAFETY WITH AUTOSWITCHWith AutoSwitch you can select the 2CYBEL setting with 2LMB, if you want to switch the EVS off. The EVS system is deactivated when the stabilizer beams are fully extended and the stabilizer legs are on the ground. It is a require-ment, however, that during the stability test, the crane fitter has made sure the vehicle is stable with the correct CYBEL support.

HMF INFOCENTREThe HMF InfoCentre constantly provides information on the current load and operation, so that you can see the load moment, the inclination of the vehicle and a lot more. If the crane stops, you can read the reason immediately, and take suitable precautions.

BEW - BEAM WARNINGNew, simplified warning system monitoring whether the stabilizer beam is in correct transport position.

HMF - POWER TO LIFT

MORE USER-FRIENDLYTHAN EVER BEFOREWhen upgrading the cranes in the medium range, not only have we taken quality, safety and strength into consider-ation but also user-friendliness. And therefore, we have developed a number of new features & options that will make your working day with crane operation even more efficient.

NEW AND STRONGER FLY-JIB - WITH HIGH CAPACITYThe new Fly-Jib 700 is flexible with over-bending to get access under difficult conditions. Strong, optimised match between crane and Fly-Jib for lifting in high positions. Low tare weight that allows for a larger load on the truck body and offers a particularly excellent weight-to-lift ratio on the crane and Fly-Jib.

EVEN BETTER CONTROL- AND HIGHER SPEEDA PVG 32 control valve optimised to the PCC, PFC and SBC functions in combination with a new high-pressure filter kit provides higher oil flow and thereby lower generation of heat from pump to control valve which ensures higher working speed, low maintenance costs and thereby improved operating economy.

Progressive Crane Control (PCC) The PCC function dampens both mechanical and hydraulic oscillations during sudden movements with the control valve levers, so crane movements are more flexible, while the work is more efficient and wear and tear is reduced.

Priority Flow Control (PFC)PFC controls the oil flow when operation requires more oil capacity than the pump can deliver, so none of the crane functions are stopped. All functions run, just more slowly, except for slewing, which is kept constant. This improves the operating economy, while at the same time the fast working pace is still ensured.

Slew Braking Control (SBC)SBC dampens the slewing movement in case of sudden stops, and provides smooth slewing movements, comfort and efficiency in case of intensive use and high oil flow. Fast work (typically loading and unloading with a grab at a long distance) can be carried out faster. The impact and wear on the crane components are reduced and you obtain a higher re-sale value.

HMF - POWER TO LIFT

POWER PERFORM - NEW PVG CONTROL VALVE

HIGH-PRESSURE FILTER KITWITH HIGHER OIL FLOW

MAIN BOOM WITH INCREASED STRENGTH

New and improved design of the main boom optimises strength and lifting capacity and provides more resistance to wear.

New PVG 32 control valve adapted to the SBC, PCC and PFC functions. Provides higher oil flow and thereby faster reaction and an even higher precision on the boom and jib cylinders.

Allows for higher oil flow and thereby higher working speed. Furthermore it provides low generation of heat with variable flow pump, which extends the life span of the oil.

EXTENSION PROFILE WITH EXTRA STRENGTH

A wide hexagonal profile with large bearing surfaces com-bined with ultra-high tensile steel gives extra great strength and precision, both in case of vertical and horizontal lifting tasks.

HMF MEWP PERSONNEL BASKET

HMF OIL COOLER WITH INCREASED COOLING EFFECT

. HMF oil cooler with thermostat and “soft start” ventilator.

MANY COMPONENTS IN ZN-NI OR ZN-FE

EVS OR 2CYBELSTABILIZER BEAM WITH EXTRA WIDTH

EXTENSION PROFILE WITH EXTRA STRENGTH

HMF MEWP with long reach offers the possibility of more and new lines of business as it is easy to change between tasks with personnel lifting and traditional crane operation.

MAIN BOOM WITH INCREASED STRENGTH

HMF - POWER TO LIFT

LIFTING CAPACITY1920K-RCS

Lifting capacity with manual extensions

Lifting capacity, no manual extensions

FJ-700

kg 2280 1295 865 640 505 350(80°) m 4,5 6,2 8,1 10,0 11,9 13,9

1920K2-RCS

kg 4070 2780 2100 1610m 4,3 6,3 8,3 10,4

1920K4-RCS

kg 3740 2500 1840 1430 1170 930m 4,5 6,4 8,4 10,5 12,7 15,0

1920K6-RCS

kg 3470 2270 1620 1220 970 810 700 500m 4,6 6,6 8,6 10,7 12,9 15,0 17,2 19,6

1920K5-RCS

kg 3600 2380 1720 1320 1060 900 740m 4,6 6,5 8,5 10,6 12,8 14,9 17,2

1920K1-RCS

kg 4200 2910m 4,3 6,2

1920K3-RCS

kg 3900 2640 1960 1560 1220m 4,4 6,3 8,3 10,4 12,7

FJ-700

kg 730 620 535 475 425 350(0°) m 13,7 15,4 17,2 19,1 21,1 23,0

1920K3 WITH FJ7001920-K3+FJ700 K3: 7675 Max. 19159

5090

1489

290

2635

238926

70

*1045950

381

60

2500

1250

2665

1920-K3+FJ700 K4: 7745 Max. 21180

*Extra valve kit on Fly-jib

with

win

ch

Section

1 (1)

Technical Information 1920K-RCS

Dimension sketch, 1920-K3 with FJ700

31-08-2018

31 127 265Date Page

Catalogue no.

We reserve the right to introduce improvements and modifications

- power to lift.

28,5

732162

2715

1953

2250

1250

2500

290 CL CHASSIS

76 (TYP.)

2522

4726

381

60

950

825

2535

A

TOP CHASSIS

A

TOP CHASSIS TOP CHASSIS

A-A

Section

1 (1)

Technical Information 1920K-RCS

Dimension sketch

31-08-2018

31 127 40Date Page

Catalogue no.

We reserve the right to introduce improvements and modifications

- power to lift.

DIMENSION SKETCHES1920K-RCS

HMF - POWER TO LIFT

HMF - POWER TO LIFT

DATA SHEET

TECHNICAL DATA 1610K3-RCS

1620K3-RCS

1910K4-RCS

1920K4-RCS

2310K5-RCS

2320K5-RCS

2810K5-RCS

2820K5-RCS

MAX. LOAD MOMENT, TM 14.3 14.3 16.8 16.8 19.2 19.4 24.2 24.3

MAX. HYDRAULIC REACH, M 10.5 10.5 12.8 12.8 14.8 14.8 14.8 14.8

MAX. HYDRAULIC REACH WITH FLY-JIB, M N/A N/A N/A N/A N/A N/A N/A 25.2

SLEWING TORQUE, KGM 1795 1795 1795 1795 2765 2765 2765 2765

SLEWING AREA 400 400 400 400 400 400 400 400

WORKING PRESSURE, BAR 365 365 365 365 365 365 365 365

WEIGHT CRANE, KG 1590 1640 1785 1835 2250 2350 2415 2500

BEAM EXTENSION, WIDTH, M 4.6 - 6.4 4.6 - 6.4 4.6 - 6.4 4.6 - 6.4 5.5 - 7.4 5.5 - 7.4 5.5 - 7.4 5.5 - 7.4

MAX. PUMP PERFORMANCE, L/MIN 70-100 70-100 70-100 70-100 70-100 70-100 70-120 70-120

MAX. POWER CONSUMPTION, KW 43-61 43-61 43-61 43-61 43-61 43-61 43-73 43-73

FOLDED WIDTH, MM 2500 2500 2500 2500 2500 2500 2500 2500

WEIGHT OF STABILIZERS 200 - 315 200 - 315 200 - 315 200 - 315 290 - 365 290 - 365 290 - 365 290 -365

LENGTH OF CRANE 825 825 825 825 885 885 885 885

FEATURES 1610K-RCS

1620K- RCS

1910K-RCS

1920K-RCS

2310K- RCS

2320K- RCS

2810K- RCS

2820K- RCS

CONTROL MODE RCS RCS RCS RCS RCS RCS RCS RCS

CONTROL VALVE PVG 32 PVG 32 PVG 32 PVG 32 PVG 32 PVG 32 PVG 32 PVG 32

SAFETY SYSTEM – CRANE – CE RCL5300 RCL5300 RCL5300 RCL5300 RCL5300 RCL5300 RCL5300 RCL5300

ELECTRIC VOLTAGE 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V

HYDRAULIC SYSTEM - CIRCUIT 1 1 1 1 1 1 1 1

PUMP PERFORMANCE FIXED FIXED FIXED FIXED FIXED FIXED FIXED FIXED

OVER-BENDING ON CRANE, ° 15 15 15 15 15 15 15 15

OVER-BENDING ON FLY-JIB, ° 20 20 20

HIGH-PRESSURE FILTER YES YES YES YES YES YES YES YES

POWER PLUS LINK ARM SYSTEM YES YES YES YES YES YES YES YES

INTERNAL HOSE ROUTING YES YES YES YES YES YES YES YES

HYDRAULIC SWING-UP STABILIZER LEGS YES YES YES YES YES YES YES YES

OIL COOLER WITH TEMPERATURE MONITORING YES YES YES YES YES YES YES YES

OPTIONS

HMF INFOCENTRE

SAFETY SYSTEM, EVS

STABILITY SYSTEM, 2CYBEL

AUTOSWITCH

SAFETY SYSTEM – TRANSPORT – CE BEHEW BEHEW BEHEW BEHEW BEHEW BEHEW BEHEW BEHEW

FLY-JIB 700

MANUAL EXTENSION, FLY-JIB

1 MANUAL EXTENSION, CRANE K2-K6 K2-K6 K2-K6 K2-K6 K4-K8 K4-K8 K4-K8 K4-K8

PERSONNEL BASKET

VARIABLE PUMP FLOW

OIL TANK 150L

RAL COLOUR