High - IQ- · PDF fileDIN 3021 Heavy-duty Spring-Band clip ... the best range of hose clips...

44

45 - 47

1

6 - 8

7 - 9

10 - 11

12 - 14

16

17

18

19

20

21

68

69

26

27

28

29

30 - 34

35 - 39

52

54

55

53

56 - 57

58 - 59

60

61

66

67

W1

W2 - W4 - W5

W1-W4

W1-W4

W1-W4

W1-W4

W1

W1

W1

W1

W2

W4

W4

W1

W4

W1

W1 - W2 - W3 - W4 - W5

W1 - W2 - W3 - W4 - W5

W1

W4

W1

W3

W3

W3

W2

Super Heavy-Duty Clamp

Supra Heavy-Duty Clamp

High Pressure

Low Pressure

One Ear Clips

Two-Ear Clips

One Ear clips with W4 Inner-Ring

DIN 3016 P-Clips

Spring Clip

Wire Clip

Wire Clip with screw

« Normal » Mini Clip

Open worm-drive

Endless band and housing

Manual Tools

Automatic Tools

Tools and Accessories

Medium Pressure

Preformed Clamp

« Stepless » Ear Clamp

Clip Clamp

Fixed diameter “S” Clamp

ASFA –L Worm-Drive Clip

ASFA –S Worm-Drive Clip

DIN 3021 Heavy-duty Spring-Band clip

Double-Bridge Clip

ASFA TI Titanium Hose Clip

Exhaust Clamp

Teflon-Coated inner rings for ASFA – L/S Clips

ASFA –L /S Worm-Drive Clips Black Finish

ASFA –S CT Constant-Tension Worm-Drive Clip

Supra CT Constant-Tension Heavy-Duty Clamp

Special Clamps

Worm-Drive Hose Clip Assortments

Worm-Drive Hose Clip Display Units

Assortment Boxes and Display Units

* This catalogue is the property of The Mikalor Group. Any partial or total reproduction of any or all of the contents is strictly forbidden, unless written authorization is given by the Mikalor Group or any of the companies which form part of it. Failure to comply with this will lead to prosecution

* Due to continuing technical advances and the evolution of materials used in the manufacture of the products in this catalogue, Mikalor reserves the right to carry out dimensional, structural or other modifications

without giving prior notice, with the aim of supplying a better and more efficient product. * This catalogue is for commercial use. The details contained herein do not constitute a contract in any way.

2

Mikalor Technology

Our technological capacity means that we can offer our clients optimum fastening solutions tailored to their particular needs.

One of the main factors which makes Mikalor stand out from the rest is the role of I+D+i. Our I+D department is the motor of the Mikalor Group, constantly pushing the boundaries of the range of solutions we can provide to our clients.

Development projects are coordinated from the beginning to the end of the life cycle of a product as solutions are trialed and tested during all phases of product design, development, CAE, prototypes and tooling manufacture.

We work hand in hand with the engineering departments of our clients in the search for the appropriate fastening solution for each particular case.

The majority of the products designed and manufactured by Mikalor are patented worldwide.

Mikalor, S.A.

Mikalor has been present on the international fasteners market since 1943 with a wide range of top-quality products which provide fastening solutions adapted to the needs of modern industry. The Mikalor Group is made up of 6 companies, including Mikalor S.A.

Damesa is responsible for all the distribution and commercialization of the products manufactured by the different companies which form the Mikalor Group.

The main manufacturing unit, where our range of hose clips and clamps is manufactured, is situated in Sabadell, a city about 25 km from Barcelona. Our state of the art manufacturing processes, certified to ISO 9001 and ISO 14001, guarantee the best range of hose clips and clamps in the world.

Our use of high-tech manufacturing processes has given Mikalor an important presence in international automotive, white-goods and general industrial sectors.

Mikalor Products

Our aim is to fulfill the highest expectations of industrial clients offering the widest possible range of solutions, working at all times to maintain and improve our competitive position in the market. Environmental concerns are forefront in our minds at all stages of the manufacturing process.

Mikalor is the only company in the world at this time to have launched a range of 100% Titanium worm-drive hose clips, designed to meet the needs of the most demanding of industrial applications.

Our R&D department has also pioneered products such as the famous SUPER heavy-duty hose clamp, the benchmark by which all other heavy-duty clamps are judged.

3

Our Committment

We are committed to the promotion of a corporate culture whose aim is the total satisfaction of our clients’ expectations. In order to fulfill this commitment, Mikalor invests continuously in technology and human resources in order to ensure the quality of our products and processes.

All the different processes involved in the manufacture of Mikalor products are carried out by companies which are members of the Group. Rather than outsourcing manufacturing processes, we prefer to have full control of the entire process from the design of the product right up to the moment it is delivered to our client.

This commitment means that we can guarantee top quality products which have been manufactured in optimum conditions.

The future for Mikalor

Here at Mikalor we are working towards the future, in solid partnership with our clients, and with total respect for current environmental legislation.

Mikalor and the rest of the companies in the group are already working and will continue to work tirelessly to rise to the challenges which lie ahead.

This dedication to the pursuit of excellence, which has been a constant aspect of our activities since Mikalor was founded in 1943, has led to the supreme quality of our product range and the unparalleled worldwide reputation of the Mikalor brand.

Material Specification Chart according to international norms

DIN

(Germany)

1.0213

1.0935

1.0213

1.4016

1.4016

1.4016

1.4031

1.4031

1.4571

(1.4401)

AISI

(United States)

430

430

430

304

304

316

316

EN

(EU)

X6Cr17

X6Cr17

X5CrNi1810

X5CrNi1810

X6CrNiMoTi17122

(X5CrNiMo17122)

AFNOR

(France)

Z8C 17

430 S 17

Z7CN 18-09

304 S 16

304 S 31

Z6CNDT 17-12

320 S 31

(Z7 CDN 17-12-02)

UNI

(Italy)

X8Cr 17

X8Cr 17

X5 CrNi1810

X5 CrNi1810

X6 CrNiMo Ti17 12

(X5 CrNiMo 17 12)

W1

W2

W3

W4

W5

Qst 36-3 Steel white zinc-plated Cr3

Zinc-plated steel Cr3Qst 36-3 Steel white zinc-plated Cr3

X6Cr17

SCREW

BAND AND HOUSING

SCREW

BAND AND HOUSING

SCREW

BAND AND HOUSING

SCREW

BAND AND HOUSING

SCREW

BAND AND HOUSING

Low Pressure

W1

6

Ø AC

E

B

D

W1

Zinc-plated mild steel

One-ear clip

ReferenceW1

0301208003012072030120130301202103012030030120480301205603012064

BoxQuantity

100010001000500500500500500

Packing

80008000800080008000400040004000

Colour

WHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITE

Information

The use of One-ear clips is an economical solution for many simple hose assemblies, as they can be used with air or other fluids. The practical design of ear clips means that they are tamper-proof once mounted. The edges are rounded to avoid damage to the hose.One-ear clips are easy, fast and safe to mount.

One Ear Clip - A10R W1

Ø Applicationmax.

910111213141618

min.

789

1011121416

A

9,310,311,312,313,314,316,318,5

B

5,56,06,57,07,58,08,59,5

C

6,06,06,56,56,57,07,07,0

D

13,014,015,016,017,018,520,523,0

E

0,80,80,80,80,91,01,11,2

* Please see pages 68 and 69 for further information regarding application tools.

Materials

Band:St 34 steel (DIN 2393 C)

Finish:Silver-white Cr3 Zinc-Plated

W1

7

W1

Ø AC

E

B

D


Two-ear clip

ReferenceW1

0301210103012110030121280301209903012136030121440301215203012160030121790301218703012195030122080301221603012224030122320301224003012259030122670301227503012283

Box Quantity

20001000100010005005005005002502502502002002001001001001007575

Packing

160001600080008000800040004000500

2000200020001600160020080080080010060075

Colour

WHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITE

Information

The use of Two-ear clips is an economical solution for many simple hose assemblies, used with air or other fluids. The two ears give the clip extra grip and help to maintain constant pressure around the hose. Fitting is more flexible and exact. The practical design of Two-ear clips means that they clamp firmly on to the assembly and are tamper-proof once mounted. The edges are rounded to avoid damage to the hoseTwo-ear clips offer great versatility in simple hose assemblies.

Two-ear Clip - A20R W1

Ø Applicationmax.

79

111213151718202123252728313437404346

min.

579

1011131415171820222325283134374043

A

7,39,3

11,312,313,315,317,518,520,521,523,525,527,528,531,534,537,540,543,546,5

B

4,34,85,35,55,86,36,67,07,67,98,59,19,4

10,010,611,011,512,012,513,0

C

6,06,06,56,56,57,07,07,57,58,08,08,58,59,09,09,59,5

10,010,010,5

D

11,013,517,018,019,021,524,025,027,028,031,033,035,036,039,042,046,049,053,056,0

E

0,60,80,80,90,91,01,21,21,21,21,31,41,41,41,41,41,61,61,61,6


Materials



W4

8

Ø AC

E

B

D

W4

AISI-304 Stainless steel (A2)

Stainless-steel One-ear clip

ReferenceW4

230124402301208723012010230120282301203623012044230120792301205223012458230120602301242323012431

BoxQuantity

1000100010001000500500500500500500250250

Packing

16000160008000800080008000400040004000400020002000

Colour

INOXINOXINOXINOXINOXINOXINOXINOXINOXINOXINOXINOX

Information

The use of One-ear clips is an economical solution for many simple hose assemblies, used with air or other fluids. Due to the AISI-304 steel used in the manufacture of these clips, their corrosion resistance is outstanding.They are recommended especially in outdoor applications. Like all ear clips, once mounted they are tamper-proof.

One-ear Clip - A10R INOX W4

Ø Applicationmax.

91011121314151617181920

min.

789

101112131415161718

A

9,310,311,312,313,314,315,316,317,518,519,520,5

B

5,56,06,57,07,58,08,08,59,09,09,5

10,0

C

6,06,06,56,56,57,07,07,07,07,07,57,5

D

13,014,015,016,017,018,519,520,522,023,024,025,0

E

0,80,80,80,80,81,01,01,01,01,01,01,0


Materials

Band:AISI-304 Stainless steel (A2)

Finish:100% Stainless steel

W4

9

W4

Ø AC

E

B

D

AISI-304 Stainless steel (A2)

Stainless-steel Two-ear clip

Reference W4

2301210823012116230121242301213223012140230121592301216723012175230121832301219123012204

BoxQuantity

200010001000500500500500250250250200

Packing

1600016000800080004000400040002000200020001600

Colour

INOXINOXINOXINOXINOXINOXINOXINOXINOXINOXINOX

Information

The use of Two-ear clips is an economical solution for many simple hose assemblies, used with air or other fluids. The two ears give the clip extra grip and help to maintain constant pressure around the hose. Fitting is more flexible and exact. The practical design of Two-ear clips means that they clamp firmly on to the assembly and cannot be removed once mounted. The edges are rounded to avoid damage to the hoseDue to the AISI-304 steel used in the manufacture of these clips, their corrosion resistance is outstanding.They are recommended especially in outdoor applications.

Two-ear Clip - A20R INOX W4

Ø Applicationmax.

79

111315171820212325

min.

579

1113141517182022

B

4,34,85,35,86,36,67,07,67,98,59,1

A

7,39,3

11,313,315,317,518,520,521,523,525,5

C

6,06,06,56,57,07,07,57,58,08,08,5

D

11,514,516,519,021,524,025,027,028,530,533,5

E

0,60,80,80,81,01,01,01,01,01,01,2


Materials



W1

10

Ø AC

E

B

D

FG

W1

With Stainless steel Inner-Ring

One-ear clip

ReferenceW1

0301100903011010030110290301103703011045030110530301106103011070

Box Quantity

100010001000500500500500500

Packing

80008000800080008000400040004000

Colour

WHITEWHITEWHITEWHITEWHITEWHITEWHITEWHITE

Information

The use of One-ear clips is an economical solution for many simple hose assemblies, as they can be used with air or other fluids. The inner-ring means that the clamp fits snugly around the hose, while the beveled edges protect the hose from being pinched during fitting. The use of One ear clips with Inner-ring is recommended when working with delicate hoses.

One Ear Clip - A10RB W1

Ø Applicationmax.

8,59,5

10,511,512,513,315,317,3

min.

7,58,09,0

10,010,511,513,015,0

B

5,56,06,57,07,58,08,59,5

A

9,310,311,312,313,314,316,318,5

C

6,06,06,56,56,57,07,07,0

D

13,014,015,016,017,018,520,523,0

E

0,80,80,80,80,91,01,11,2

F

8,59,5

10,511,512,513,315,317,3

G

7,87,87,87,87,88,88,88,8


Materials



Inner-ring:AISI-301 Stainless steel

W4

11

Ø AC

E

B

D

GF

W4

With Stainless steel Inner-Ring

Stainless steel One-ear clip

ReferenceW4

230123002301231923012327230123352301234323012351230123602301237823012386230123942301240723012415

BoxQuantity

2000100010001000500500500500250250250200

Packing

1600080008000800080004000400040004000400020002000

Colour

INOXINOXINOXINOXINOXINOXINOXINOXINOXINOXINOXINOX

Information

The use of One-ear clips is an economical solution for many simple hose assemblies, as they can be used with air or other fluids. The inner-ring means that the clamp fits snugly around the hose, while the beveled edges protect the hose from being pinched during fitting.Due to the AISI-304 steel used in the manufacture of these clips, their corrosion resistance is outstanding. These clips are especial ly recommended in outdoor and marine applications.

One Ear Clip - A10RI W4

Ø Applicationmax.

8,59,5

10,511,512,513,514,515,316,317,318,319,3

min.

7,58,29,0

10,010,511,512,513,014,015,016,017,0

B

5,56,06,57,07,58,08,08,59,09,59,5

10,0

A

9,310,311,312,313,314,315,316,317,518,519,520,5

C

6,06,06,56,56,57,07,07,07,07,07,57,5

D

13,014,015,016,017,018,519,520,522,023,024,025,0

E

0,80,80,80,80,81,01,01,01,01,01,01,0

F

8,59,5

10,511,512,513,514,515,316,317,318,319,3

G

7,87,87,87,87,87,88,88,88,88,89,89,8


Materials



Inner-ring:AISI-301 Stainless steel

12

W1

DIN: 3016

Rubber-lined P-Clip

Article

AGD 5/12AGD 6/12AGD 8/12

AGD 10/12AGD 12/12AGD 13/12AGD 14/12AGD 15/12AGD 16/12AGD 17/12AGD 18/12AGD 19/12AGD 20/12AGD 21/12AGD 22/12AGD 23/12AGD 24/12AGD 25/12AGD 26/12AGD 27/12AGD 28/12AGD 6/15AGD 8/15

AGD 10/15AGD 12/15AGD 13/15AGD 14/15AGD 15/15AGD 16/15AGD 17/15AGD 18/15AGD 19/15AGD 20/15AGD 21/15AGD 22/15

ReferenceAGD

0300385603003864030038800300390103003928030039360300394403003952030039600300397903003987030039950300400703004015030040230300403103004040030040580300406603004074030040820300466403004680030047010300472803004736030047440300475203004760030047790300478703004795030048080300481603004824

Band-width

a

1212121212121212121212121212121212121212121515151515151515151515151515

DiameterApplication

568

10121314151617181920212223242526272868

101213141516171819202122

d

5,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,36,46,46,46,46,46,46,46,46,46,46,46,46,46,4

BoxQuantity

200200200200200200200200200200200200200100100100100100100100100200200200200200200200200200200200200100100

Information

T h e s e r u b b e r- l i n e d connecting clamps, known in the market as «P-Clips» are composed of a zinc-plated mild steel band lined with EPDM rubber. This rubber lining allows for firm and safe clamping in the appl icat ion zone and prevents potential damage due to vibration. The screw holes at either end of the band are reinforced with steel plates to ensure they clamp down firmly. P-Clips a r e p a r t i c u l a r l y r e c o m m e n d e d f o r mounting pipes, electric cable ducting and hoses in a multitude of different applications.

Rubber lined P-Clip W1

Packing

200200200200200200200200200200200200200100100100100100100100100200200200200200200200200200200200200100100

Metricscrew

M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6

W1

13

dW1

d

a

Article

AGD 23/15AGD 25/15AGD 26/15AGD 28/15AGD 30/15AGD 32/15AGD 34/15AGD 35/15AGD 37/15AGD 38/15AGD 40/15AGD 11/20AGD 12/20AGD 13/20AGD 14/20AGD 15/20AGD 16/20AGD 18/20AGD 19/20AGD 20/20AGD 21/20AGD 22/20AGD 23/20AGD 24/20AGD 25/20AGD 27/20AGD 28/20AGD 30/20AGD 32/20AGD 34/20AGD 35/20AGD 36/20AGD 38/20AGD 40/20

Reference AGD

03004832030048590300486703004883030049040300492003004947030049550300497103004980030050000300551003005528030055360300554403005552030055600300557903005587030055950300560803005616030056240300563203005640030056670300567503005691030057120300573903005747030057550300577103005798

Band-width

a

15151515151515151515152020202020202020202020202020202020202020202020

DiameterApplication

23252628303234353738401112131415161819202122232425272830323435363840

d

6,46,46,46,46,46,46,46,46,46,46,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,4

BoxQuantity

1001001001001001001001001001001001001001001001001001001001005050505050505050505050505050


Packings

1001001001001001001001001001001001001001001001001001001001005050505050505050505050505050

Metricscrew

M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8

* P-Clips can be supplied in bandwidths of up to 25mm and in diameters up to 100 mm.* Other models of DIN 3016 P-Clips are also available on request. (Forms B, C, E and F and also without rubber lining.

Materials

Band:Mild steel reinforced at both ends

Finish:Galvanized and lined with EPDM rubber

14

W4

DIN: 3016

Rubber-lined P-Clip

Article

AGID 5/12AGID 6/12AGID 8/12

AGID 10/12AGID 12/12AGID 13/12AGID 14/12AGID 15/12AGID 16/12AGID 17/12AGID 18/12AGID 19/12AGID 20/12AGID 21/12AGID 22/12AGID 23/12AGID 24/12AGID 25/12AGID 26/12AGID 27/12AGID 28/12AGID 6/15AGID 8/15

AGID 10/15AGID 12/15AGID 13/15AGID 14/15AGID 15/15AGID 16/15AGID 17/15AGID 18/15AGID 19/15AGID 20/15AGID 21/15AGID 22/15

ReferenceAGD

4300385943003867 430038834300390443003920430039394300394743003955430039634300397143003980430039984300400043004018430040264300403443004042430040504300406943004077430040854300466743004683430047044300472043004739430047474300475543004763430047714300478043004798430048004300481943004827

Band-width

a

1212121212121212121212121212121212121212121515151515151515151515151515

DiameterApplication

568

10121314151617181920212223242526272868

101213141516171819202122

d

5,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,35,36,46,46,46,46,46,46,46,46,46,46,46,46,46,4

BoxQuantity

200200200200200200200200200200200200200100100100100100100100100200200200200200200200200200200200200100100

Information

T h e s e r u b b e r- l i n e d connect ing c lamps, known in the market as «P-Clips» are composed of an AISI 304 stainless steel band lined with EPDM rubber. This rubber lining allows for firm and safe clamping in the application zone and p r e v e n t s p o t e n t i a l damage due to vibration. The screw holes at either end of the band are reinforced with steel plates to ensure they clamp down tight. P-Clips are particularly recommended for mount ing p ipes, electric cable ducting and hoses in automotive and marine applications and in industrial machinery.The fact that this P-Clip is manufactured entirely in AISI-304 material makes it i d e a l f o r m a r i n e applications.

Packing

200200200200200200200200200200200200200100100100100100100100100200200200200200200200200200200200200100100

Metricscrew

M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.5M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6


W4

15

dW1

d

a

Article

AGID 23/15AGID 25/15AGID 26/15AGID 28/15AGID 30/15AGID 32/15AGID 34/15AGID 35/15AGID 36/15AGID 37/15AGID 38/15AGID 40/15AGID 11/20AGID 12/20AGID 13/20AGID 14/20AGID 15/20AGID 16/20AGID 18/20AGID 19/20AGID 20/20AGID 21/20AGID 22/20AGID 23/20AGID 24/20AGID 25/20AGID 27/20AGID 28/20AGID 29/20AGID 30/20AGID 32/20AGID 34/20AGID 35/20AGID 36/20AGID 38/20AGID 40/20

ReferenceAGD

430048354300485143004860430048864300490743004923430049404300495843004966430049744300498243005002430055124300552043005539430055474300555543005563430055714300558043005598430056004300561943005627430056354300564343005661430056704300568843005696430057154300573143005740430057584300577443005790

Band-width

a

15151515151515151515152020202020202020202020202020202020202020202020

DiameterApplication

23252628303234353738401112131415161819202122232425272830323435363840

d

6,46,46,46,46,46,46,46,46,46,46,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,48,4

BoxQuantity

1001001001001001001001001001001001001001001001001001001001005050505050505050505050505050


Packing

1001001001001001001001001001001001001001001001001001001001005050505050505050505050505050

Metricscrew

M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.6M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8M.8

* P-Clips can be supplied in bandwidths of up to 25mm and in diameters up to 100 mm.* Other models of DIN 3016 P-Clips are also available on request. (Forms B, C, E and F and also without rubber lining.

Materials

Band:AISI 304 stainless steel (A2) with reinforced screw holes

Lining:EPDM rubber

W1

16

Ø d i

a

s

b

W1 Spring Clip

ReferenceW1

0201402502014033020140410201405002014068020140760201408402014092020141050201411302014121

BoxQuantity

500500500500500500500500500500500

Packing

80008000800040004000400040004000400040004000

Information

Spring clips are designed to distribute pressure uniformly around the application zone. Their use is recommended when the hose is subject to rapid changes in temperature which cause expansion and contraction of the materials used in the assembly. The spring clip maintains pressure during this process, thereby preventing leaks.

Spring Clip AML W1

s

0,50,50,60,60,70,70,70,80,80,80,8

a ± 0,05

333

3,53,5444

4,54,53,2

b

77888888888

Ø di

±0,1

±0,1

±0,15

±0,15

±0,2

±0,2

±0,2

±0,2

±0,2

±0,2

±0,4

5,5 6,47,48,49,3

10,311,112,913,515,618,4


Materials

Band:Spring steel


Nominaldiameter Ø

6789

10111214151720

W1

17

r 1

r 2

Ø d

h

Ø s

W1 Wire Clip

ReferenceW1

02016012020160200201603902016047020160550201606302016071020160800201609802016100020161190201612702016135020161430201615102016160020161780201618602016194

BoxQuantity

100010001000100010001000100010001000500500500500500500500500500500

Packing

8000800080008000800080008000800040004000400040004000400040004000200020002000

Information

Wire clips are a competitively-priced clamping solution in certain applications. They are u s e d i n l o w - p re s s u re applications and particularly with small diameter sunken spiral hoses.

Spring Clip AAL W1

Ø Applicationmax.

7,88,38,89,39,9

10,411,011,612,313,113,614,415,115,916,817,718,719,620,6

min.

7,37,88,38,89,39,8

10,411,011,612,112,913,614,414,815,916,817,718,719,6

Øs

1,01,01,01,01,01,21,21,21,51,51,51,51,81,81,81,82,02,02,0

hmax.

5,55,55,55,55,56,36,36,37,37,37,37,38,48,48,48,49,99,99,9

r2

8,28,38,69,09,0

10,511,411,912,413,714,014,516,016,416,616,517,718,018,5

r1

10,710,710,911,011,813,514,814,816,417,217,018,019,621,022,021,322,723,324,0


nominal

7,68,18,69,19,6

10,110,711,311,912,813,314

14,815,516,417,318,219,220,2

Materials

Band:Spring steel

Finish:Cr3 Zinc-Plated

W1

18

l

e

d

h

W1 Wire Clip with screw

d Ø Applicationmm

9,5-1210,5-1311,5-1412,5-1513,0-1613,5-1715,0-1815,5-1917,0-2017,5-2118,5-2219,0-2321,0-2421,5-2523,5-2725,0-2927,0-3129,0-3330,5-3533,0-3735,5-4038,5-4341,0-4643,5-4946,5-5350,5-5653,5-6056,5-6460,0-6864,0-7268,5-7672,5-8076,5-84

d

1,51,51,51,51,81,81,81,81,81,82,02,02,02,22,22,22,22,22,22,22,22,52,52,52,52,52,82,82,82,83,03,03,0

Box quantity

500500500500500500500500500500500500500500500200200200200200200200200200100100100100100100100100100

Information

This clip was specially designed for use with hoses incorporating an outer helix. It is generally used when installing ventilation ducting.The double-wireconstruction of this clip means that it sits comfortably on either side of the helix and can then be clamped down firmly thanks to the screw-tightening system.

* The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.

AAT W1 wire clip with screw

e

5,55,55,55,55,55,55,55,55,55,57,07,07,07,07,07,07,07,07,07,07,08,08,08,08,08,0

10,010,010,010,010,010,010,0

l

202020202525252525253030303030303030303030404040404050505050505050

hmax

111111111111111111111313131313131313131313151515151518181818181818

Packing

200020002000200020002000200020002000200020002000200020002000800800800800800800800800800400400400400400400400400400


d Ø Applicationnominal mm

11,011,512,513,014,015,016,017,018,018,520,020,522,023,525,027,029,031,533,037,038,541,043,546,550,553,556,560,064,068,572,576,580,0

Application

030300150303002303030031030300400303005803030066030300740303008203030090030301030303011103030120030301380303014603030154030301620303017003030189030301970303020003030218030302260303023403030242030302500303026903030277030302850303029303030306030303140303032203030330

Materials

Wire: Steel wire B-UNI 3823

Screw: 6.6 grade steel Cr3 zinc-plated

W1

19

W1

9±0.1a

e

rb

Ø d

s

“Normal” Mini-clip

d Ø Applicationmm

689

9,5-1010-1112-1313-1414-1515-1716-1818-2019-2120-2222-2523-2625-2826-2929-32

ReferenceW1

030105100301052803010536030105440301055203010560030105790301058703010595030106080301061603010624030106320301064003010659030106670301067503010683

r

M3M3M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4M4

Max. values*Torque Nm

0,40,41,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,0

Max. values* Pressure (Bars)

15,014,015,014,013,012,512,512,012,011,510,510,510,59,59,08,58,58,0

BoxQuantity

100100100100100100100100100100100100100100100100100100

Information

The use of malleable mild steel in the manufacture of the “Normal” mini-cl ip means that when tightened, the clip adapts perfectly to the hose, clamping firmly but gently. This clip is recommended for use with gaseous f lu ids at low pressure.“Normal” also has many a p p l i c a t i o n s i n t h e automotive industry.

* The maximum pressure may vary depending on the type of hose and coupling used

“Normal” Mini-clip W1

e

556666666666666666

a

8,49

10101010101010101010101010101010

b

99

10101010101010101010101010101010

s

0,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,5

Packing

16001600160016001600160016001600160016001600800800800800800800800


Materials

Screw: 6.6 strengthGrey-white Cr3 zinc-plated

Nut: 6 strengthWhite Cr3 zinc-plated

Band: St 02Z (DIN 1.0226)

min. 2 threads

W2

20

a

c

b

d

W2

Open Light series

Open worm-drive clip

Ø Applicationmm

7-1111-19

ReferenceW2

0301640103016410

BoxQuantity

100100

Information

The reduced dimensions of the housing of this clip make i t the ideal choice for applications where space is l imited. I t is especial ly recommended for clamping small bore thin-walled hoses.

Open worm-drive clip W2

Packing

16001600

* The maximum pressure may vary depending on the type of hose and coupling used.

Max. values Torque Nm

1,51,5

Max. valuesPressure (Bars)

3535

a

7,57,5

b

0,40,4

c

7 7

d

55

Materials

Screw and housing: Qst 34-3 Mild Steel (DIN 1.0213)Grey-white Cr3 zinc-plated

Band: Stainless steel X8CR 17(DIN 1.4016)(AISI-430)

21

W4b

a

W4

Stainless steel AISI-304

Endless worm-drive band and housing

Description

Stamped BandStamped Band

Housing (A)

Stamped BandStamped Band

Housing (A)

Perforated BandPerforated Band

Housing (B)Housing (B)

ArticleCT/CP/CC

CT 7-25CT 7-2CCT 7

CT 11-30CT 11-3

CCT 11-A

CP 14-30CP 14-5

CCP 14-10CCP 14-50

Minimumband thickness

b

0,60,6-

0,60,6-

0,60,6--

Packing

25 mts.2 mts.

100 unid.

30 mts.3 mts.

100 unid.

30 mts.5 mts.

10 unid.50 unid.

Information

Endless banding with comes in rolls which are between 2m to 30m long, allowing you to clamp just about any assembly without knowing the diameter in advance. The housings are suppl ied separately and can be fitted easily where and when they are needed. With an endless band and a box of buckles you can cover just about any eventuality. Ideally suited for the client with temporary or occasional clamping needs.

Endless worm-drive Band and separate housing W4

Bandwidth(mm)

a

77-

1111-

1414--

Material

AISI-304 Stainless steelAISI-304 Stainless steel

AISI-302 Cu Stainless steel


AISI-302 Cu Stainless steel


AISI-302 Cu Stainless steelAISI-302 Cu Stainless steel

Reference

030111090301111703011125

030111680301117603011184

03012961030111920301120503012970

Materials

Band: AISI-304 Stainless steel (A2)

Housing: AISI-3025 (Cu Stainless steel)

22

B

C

D

E

A

B

E

A

C

D

F

G

F

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

20,0

0

10,0

One Ear clips with W4 Inner-Ring

TechnicalInformation

The inner-ring protects the underside of the ear, thereby ensuring a snug fit around the hose.

Materials free of toxic substances in accordance with current environmental legislation.

Easy and quick to mount.

Rounded band edges which prevent cutting or damage to the hose.

All clips and clamps are marked with the clamping range and the Mikalor logo.

Wide variety of models which cover many applications.

In order to decide which ear clamp to use, add 1 mm to the OD of the tube or hose to be clamped.

B

C

D

E

A

Rubber-lined P-Clip

The rubber lining allows for firm and safe clamping, protecting the application zone and preventing potential damage due to vibration.

The screw holes at either end of the band are reinforced with steel plates to avoid damage to the holes when a lot of force is applied.

The steel used to manufacture the band is very flexible, meaning that the P-Clip fits snugly into the application zone.

The band, reinforcements and band edges are electro zinc-plated, thereby increasing resistance to corrosion.

All clips are marked with the application diameter and the Mikalor logo.

Special diameters are also available on request.

B

C

D

F

A

F

G

E

S2

17,8

S3

18,1

S4

8,2

S5

20,4

S6

18,8

S7

19,8

S8

11,2

Average

16,3

S1

16,1

Sectors

Force Kg

Polar Diagram

Torque / Efficiency [ Nm / daN ]

23

C

D

A

E

B

A

B

E

F

C

D

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

40,0

0

20,0

S-1 S-2

S-3

S-4

S-5

S-8

S-7

S-6

60,0

0

30,0

Wire Clip with screw


The steel wire used in the manufacture of this clip is free from burrs and sharp edges which could cut into the hose or ducting.

Possibility of manual or automatic mounting.

Screw-tightening system ensures effective clamping.

Double-wire construction sits comfortably on either side of the helix.


B

C

D

E

A

S2

17,421,6

S3

22,832,8

S4

22,830,4

S5

17,624,6

S6

18,224,4

S7

21,629,2

S8

14,222,8

Average

19,726,7

S1

23,028,0

Sectors

1,2 Nm1,6 Nm

Polar Diagram


« Normal » Mini-clip

Nut and bolt tightening system designed for use with a variety of different tools.

Rounded band edges prevent the clamp from digging into and cutting the hose.

Unique nut-blocking system makes tightening easy.

The band end forms a bridge which avoids possible damage to the hose during tightening and allows for a snug fit around the hose.


All clips are marked with the application diameter and the Mikalor logo.

B

C

D

E

A

F

S2

31,533,0

S3

43,044,4

S4

60,062,5

S5

29,533,0

S6

32,534,2

S7

22,523,9

S8

30,535,0

Average

34,136,5

S1

23,025,7

Sectors

1 Nm1,4 Nm

Polar Diagram


Medium Pressure

26

W4

W4

Stainless steel AISI-304

Stainless steel Preformed Clamp

ReferenceW4

0300200103002002030020030300200403002005030020060300200703002008030020090300201003002011030020120300201303002014

Width

4,504,504,504,504,504,504,507,947,947,947,947,947,947,94

Maximumdiameter

335076

1021562072455076

102135150207312

Length

130200300370520680840200300370450500680

1020

BoxQuantity

100100100100100100100100100100100100100100

Information

The housing of the p r e f o r m e d c l a m p incorporates a stainless steel ball-bearing making it extremely tough once fastened. Due to its design, the preformed clamp is tamper-proof once i t has been mounted. Two different bandwidths are available, meaning that you can clamp up to 114kg, and in applications up to 300mm in diameter.

Stainless Steel Preformed Clamp W4

Packing

8000600050004500100100100

45004000300020002500100100

Strength (Kg)

46464646464646

114114114114114114114

xxxxxxxx xxxxxx

4,504,504,504,504,504,504,507,947,947,947,947,947,947,94

3350761021562072455076102135150207312


Materials

Band: AISI-304 Stainless steel (A2)

Ball: AISI-304 Stainless steel (A2)

Ø Applicationmm

W1

27

S 0,03+-

Ø max.

H

a

W1

Mild steel

« Stepless » Ear Clamp

Ø Nominalmm

10,013,315,717,517,818,520,529,531,6 39,640,545,547,051,552,565,5

H max.mm

14,017,020,122,522,523,526,035,537,545,546,551,553,057,558,571,5

S(mm)

0,60,60,60,80,80,80,80,80,80,80,80,80,80,80,80,8

Box Quantity

100010001000100010001000500500500500500200200100100100

Information

This clamp was designed for use in assembly lines due to the fast and easy locking system. I t is normally mounted where a fixed diameter clamp is required and the application zone is difficult to access. It is particularly useful in low to med ium pressure applications and for air transfer. Once this clamp has been mounted it is tamper-proof.

« Stepless » Ear Clamp W1

Ø Application max.

9,512,815,217,017,318,020,029,031,139,140,045,046,551,052,065,0

min.

8,310,813,214,314,615,317,326,328,436,437,342,343,848,349,362,3

Ref.

03030752030307600303077903030787030307950303080803030816030308240303083203030840030308590303086703030875030308830303089103030904

Packing

800080005000500050004000300030002000 20001000400400500500500

* This clamp is also available in W4 (AISI 304) material upon request.

a0,15

7777777777777777

+-

Materials

Band: Mild Steel Dx51D + AZ 150(UNI EN 10215)

W4

28

W4

a

Stainless Steel AISI-304

Clip Clamp

Article

clip 8clip 9

clip 10clip 11clip 12clip 13clip 14clip 15 clip 16clip 17clip 18clip 19clip 20clip 21clip 22clip 23clip 24

Box Quantity

100010001000100010001000500500500500500500500500500500500

Information

The design of the locking device of the Clip Clamp allows for great precision when mounting. This device, together with the folds in the material confers a spring function to this clamp, meaning that it can maintain constant pressure around the hose. The rounded band edges avoid damage to the hose . Th i s c lamp i s especially suited for use in assembly lines and industrial applications due to the ease with which i t can be mounted and the AISI 304 material employed in its manufacture.

Clip Clamp W4

Ø Application max.

9,510,511,512,514,015,016,017,018,019,020,021,022,023,024,025,026,0

min.

8,59,5

10,511,512,513,514,515,516,517,518,519,520,521,522,523,524,5

Bandwidtha

77778888888888888

Packing

40004000400040004000400020002000 2000 2000 2000 2000 2000 2000 2000 2000 2000

Reference

0303041003030429030304370303044503030453030304610303047003030488030304960303050903030517030305250303053303030541030305500303056803030576

Materials

Band: AISI 304 (A2) Stainless Spring Steel

Ø App

licati

on

W1

29

W1

b

Ø d

a


Fixed diameter “S” Clamp

* This clamp can be supplied in diameters up to 120mm and in bandwidths up to 30mm.

Box quantity

200200200200200200200200200200200200200200200200200100100100100100100100100100100

Information

The fixed diameter « S » clamp was designed to ensure the best possible fit of hose and coupling. This is achieved due to the fact that once the clamp has been mounted and tightened it fits the desired diameter exactly. The design of this clamp means that it can be used with hoses mounted on metallic or plastic couplings. It is particularly recommended for certain sectors ranging from m e d i c a l m a c h i n e r y manufacture to the automotive industry.

Fixed diameter “S” Clamp W1

Reference

030320100303202903032037030320450303205303032061030320700303208803032096030321090303211703032740030327580303276603032774030327820303279003032803030328110303282003032838030334430303345103033460030334780303348603033494

Packing

10001000100010001000100010001000100010001000100010001000100010001000400400400400400400400400400400

ArticleADF

ADF10/9 ADF11/9ADF12/9ADF13/9ADF14/9ADF15/9ADF16/9ADF17/9ADF18/9ADF19/9ADF20/9

ADF21/12ADF22/12ADF23/12ADF24/12ADF25/12ADF26/12ADF27/12ADF28/12ADF29/12ADF30/12ADF31/15ADF32/15ADF33/15ADF34/15ADF35/15ADF36/15

a

99999999999

121212121212121212121515151515 15

Ø Application d

101112131415161718192021222324252627282930313233343536

Materials

Band: Mild steel DIN 1.0935

Screw: 6.6 grade Cr3 white zinc-plated mild steel

Nut: 6.6 grade Cr3 white zinc-plated mild steel

W1

30

a

MADE IN SPAIN

MADE IN SPAIN

MADE IN SPAIN

Ø

S

L

h

b

W1

DIN: 3017 Light series

9mm L-band Worm-drive Hose clip

Ø Applicationmm

8-1612-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceW1

030087530300876103008770030087880300879603008809030088170300882503008833030088410300885003008868030088760300888403008892030089050300891303008921

Lmax.

22,122,123,623,625,625,625,625,629,629,629,629,629,629,629,629,629,629,6

Max. Values*Torque Nm

3,03,03,53,54,04,04,04,04,04,04,04,04,04,04,04,04,04,0

Max. Values* Pressure (Bars)

4545423632282419171513111098765

BoxQuantity

2002002002001001001001001001005050252525252525

Information

Thanks to the exclusive design of the housing, the ASFA LW1 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped band thread, s m o o t h e d o n t h e underside, combined with the beveled band edges protects the hose from any damage. The ASFA-L W1 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 2002/95/EC dated 1st July 2006. This clip is ideal for general industrial applications.

Asfa-L W1 Hose Clip (9mm bandwidth)

s + 0,10

0,60,60,70,70,70,70,70,70,70,70,70,70,70,70,70,70,70,7

hmax.

101010101010101010101010101010101010

999999999999999999

b max.

141414141414141414141414141414141414

Packing

80080080080080080080040010010040040020020025252525


Patented Worldwide.

a +-0,30,2

Materials

Screw: Qst 36-3 Mild steel (DIN 1.0213)Silver-white Cr3 Zinc-Plated

Band and Housing: Galvanized steel S/EN 10292 (DIN 1.0935)

W2

31

a

MADE IN SPAIN

MADE IN SPAIN

MADE IN SPAIN

Ø

S

L

h

b

W2



Ø Applicationmm

8-128-16

12-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceW2

03016508030165160301652403016532030165400301655903016567030165750301658303016591030166040301661203016620030166390301664703016655030166630301667103016680

Lmax.

18,022,122,123,623,625,625,625,625,626,626,626,626,626,626,626,626,626,626,6


1,53,03,03,53,54,04,04,04,04,04,04,04,04,04,04,04,04,04,0


404545423632282419171513111098765

BoxQuantity

2002002002002001001001001001001005050252525252525

Information

Thanks to the exclusive design of the housing, the ASFA-L W2 hose c l ip has excel lent performance while being at the same time very compact. The cold-formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from damage. The AISI-430 Stainless steel finish of the band and housing make this a very attractive clip. The ASFA-L W2 hose clip complies fully with the DIN 3017 norm and also with the R o H s d i r e c t i v e E U 20032/95/EC dated 1st July 2006.This clip is very popular in the hardware and domest ic markets and in automotive applications.

Asfa-L W2 Hose Clip (9 mm bandwidth)

s + 0,10

0,60,60,60,70,70,70,70,70,70,70,70,70,70,70,70,70,70,70,7

hmax.

9,5101010101010101010101010101010101010

b max.

11,5141414141414141414141414141414141414

Packing

160080080080080080080080040010010040040020020025252525

*The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.Patented Worldwid

7,5999999999999999999

a +-0,30,2

Materials


Band and Housing: X6Cr17 Stainless steel(DIN 1.4016) (AISI-430)

32

a

MADE IN SPAIN

MADE IN SPAIN

MADE IN SPAIN

Ø

S

L

h

b

W3


W3 Materials

Screw: AISI 430 Stainless steel

Band and housing: Stainless steel X6Cr17 (DIN 1.4016) (AISI-430)


Ø Applicationmm

8-1612-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceW3

030160140301602203016030030160490301606503016073030160810301609003016102030161100301612903016137030161450301615303016161030161700301618803016196

Lmax.

22,122,123,623,625,625,625,625,629,629,629,629,629,629,629,629,629,629,6


3,03,03,53,54,04,04,04,04,04,04,04,04,04,04,04,04,04,0


4545423632282419171513111098765

BoxQuantity

2002002002001001001001001001005050252525252525

Information

Thanks to the exclusive design of the housing, the ASFA LW3 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped band thread, smoothed on the underside, combined with the beveled band edges protects the hose from any damage.The ASFA-L W3 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 2002/95/EC dated 1st July 2006.ASFA LW3 is special ly recommended for use in the automotive industry.

Hose Clip Asfa-L W3 (9mm bandwidth)

s + 0,10

0,60,60,70,70,70,70,70,70,70,70,70,70,70,70,70,70,70,7

hmax.

101010101010101010101010101010101010

999999999999999999

b max.

141414141414141414141414141414141414

Packing

80080080080080080080040010010040040020020025252525


Patented Worldwide.

a +-0,30,2

W4

33

a

MADE IN SPAIN

MADE IN SPAIN

MADE IN SPAIN

Ø

S

L

h

b

W4



Ø Applicationmm

8-128-16

12-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceW4

03014000030140190301402703014035030140430301405103014060030140780301408603014094030141070301411503014123030141400301415803014166030141740301418203014190

Lmax.

18,022,122,123,623,625,625,625,625,629,629,629,629,629,629,629,629,629,629,6


1,53,03,03,53,54,04,04,04,04,04,04,04,04,04,04,04,04,04,0


404545423632282419171513111098765

BoxQuantity

2002002002002001001001001001001005050252525252525

Information

Thanks to the exclusive design of the housing, the ASFA-L W4 hose c l ip has exce l lent performance while being at the same time very compact. The cold-formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from damage.The ASFA-L W4 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 20032/95/EC dated 1st July 2006.This clip is ideally for use in the marine industry, due to the corrosion resistance offered by the use of AISI-304 stainless steel in its manufacture.


s ± 0,05

0,60,60,60,70,70,70,70,70,70,70,70,70,70,70,70,70,70,70,7

hmax.

9,5101010101010101010101010101010101010

b max.

11,5141414141414141414141414141414141414

Packing

80080080080080080080080040010010040040020020025252525

*The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.

Patented Worldwide.

7,5999999999999999999

a +-0,30,2

Materials

Screw: AISI-304 Cu (A2) Stainless steel

Band and Housing: X5CrNi1810 Stainless steel(DIN 1.4301) (AISI-304) (A2)

W5

34

a

MADE IN SPAIN

MADE IN SPAIN

MADE IN SPAIN

Ø

S

L

h

b

W5



Ø Applicationmm

8-1612-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceW5

030157590301576703015775030157830301580403015812030158200301583903015847030158550301586303015871030158800301589803015900030159190301592703015935

Lmax.

22,122,123,623,625,625,625,625,629,629,629,629,629,629,629,629,629,629,6

Max. Values*Torque (Nm)

3,03,03,53,54,04,04,04,04,04,04,04,04,04,04,04,04,04,0


4545423632282419171513111098765

BoxQuantity

2002002002001001001001001001005050252525252525

Information

Thanks to the exclusive design of the housing, the ASFA-L W5 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from damage.The ASFA-L W5 hose clip complies fully with the DIN 3017 norm and also with the R o H s d i r e c t i v e E U 20032/95/EC dated 1st July 2006.This clip is ideally for use in the petrochemical, foodstuffs and marine industry due to the outstanding corrosion resistance offered by the use of AISI-316 stainless steel in its manufacture


s ± 0,05

0,60,60,70,70,70,70,70,70,70,70,70,70,70,70,70,70,70,7

hmax.

101010101010101010101010101010101010

b max.

141414141414141414141414141414141414

Packing

80080080080080080080040010010040040020020025252525


Patented Worldwide

999999999999999999

a +-0,30,2

Materials

Screw: AISI-316 Cu Stainless steel (A4)

Band and Housing: X5CrNiMo 17.12.2 Stainless steel(DIN 1.4401) (AISI-316) (A4)

W1

35

a

b

MADE IN SPAIN

Ø

S

L

h

W1

DIN: 3017 Heavy series

12mm S-band Worm-drive Hose clip

Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferenceW1

030090010300900203009003030090040300900503009006030090070300900803009009030090100300901103009012030090130300901403009015030090160300901703009018030090190300902003009021030090220300902303009024

L

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634,634,634,634,634,634,634,6


4,25,25,25,26,06,06,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,8


45454035353025201714121087654322

1,81,81,61,6

BoxQuantity

505050505050505050252525252525252525101010101010

Information

The ASFA-S W1 hose clip combines an innovat ive housing designed to take a lot of torque and a sturdy 12mm band which together make this a high performance hose clip. The cold-formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from any damage.The ASFA-S W1 hose clip complies fully with the DIN 3017 norm and also with the R o H s d i r e c t i v e E U 20032/95/EC dated 1st July 2006.This clip is ideally for use in general industrial applications w h e r e a r o b u s t a n d competitively priced clip is called for. The ASFA-S W1 is especially recommended for use in agriculture and in fluid transfer applications.


Patented Worldwide

Asfa-S W1 Hose Clip (12 mm bandwidth)

s+0,1 0

0,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,8

h

111111111111111111111111111111111111111111111111

b max.

181818181818181818181818181818181818181818181818

Packing

4004004004004004004005050

200200200252525252525101010101010

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

a +-0,40,2

Materials


Band and Housing: Galvanized steel S/EN 10292 (DIN 1.0935)

W2

36

a

b

MADE IN SPAIN

Ø

S

L

h

W2



Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferenceW2

030170170301702503017033030170090301704103017050030170680301707603017084030170920301710503017113030171210301713003017148030171560301716403017172030171800301719903017201030172100301722803017236

L

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634.634,634,634,634,634,634,6


4,25,25,25,26,06,06,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,8


45454035353025201714121087654322

1,81,81,61,6

BoxQuantity

505050505050505050252525252525252525101010101010

Information

The ASFA-S W2 hose clip combines an innovative housing and a sturdy 12mm band which together make this a high performance hose c l ip . The co ld- fo rmed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from any damage. The AISI-430 Stainless steel finish of the band and housing make this a very attractive clip.The ASFA-S W2 hose clip complies fully with the DIN 3017 norm and also with the R o H s d i r e c t i v e E U 20032/95/EC dated 1st July 2006.This clip is ideally for use in automotive applications, in agriculture and in fluid transfer applications.


Patented Worldwide


s+0,1 0

0,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,8

h

111111111111111111111111111111111111111111111111

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

b max.

181818181818181818181818181818181818181818181818

Packing

4004004004004004004005050

200200200252525252525101010101010

a +-0,40,2

Materials


Band and Housing:X6Cr17 Stainless steel(DIN 1.4016) (AISI-430)

37

a

b

MADE IN SPAIN

Ø

S

L

h

W3


W3 Materials

Screw: Stainless steel (AISI-430)

Band and housing: Stainless steel X6Cr17(DIN 1.4016) (AISI-430)


Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferenceW3

030162090301621703016225030162330301624103016250030162680301627603016284030162920301630503016313030163210301633003016348030163560301636403016372030163800301639903016428030164360301644403016452

L

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634.634,634,634,634,634,634,6


4,25,25,25,26,06,06,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,86,8


45454035353025201714121087654322

1,81,81,61,6

BoxQuantity

505050505050505050252525252525252525101010101010

Information

The ASFA –S W3 hose clip combines an innovative housing and a sturdy 12mm band (compared with 9mm in the l ight version) which together make this a high-performance hose clip. The cold-formed stamped band thread, smoothed on the underside, combined with the beveled band edges protects the hose from any damage. Manufactured in its entirety in AISI-430 stainless steel, the ASFA-S W3 is a very attractive clip which complies fully with the DIN 3017 norm and also with the RoHs directive EU 2002/95/EC dated 1st July 2006. I t i s espec ia l l y recommended for use in automotive, agricultural and fluid transfer applications.

Asfa-S W3 Hose Clip (12mm bandwidth)

s+0,1 0

0,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,8

h

111111111111111111111111111111111111111111111111

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

b max.

181818181818181818181818181818181818181818181818

Packing

4004004004004004004005050

200200200252525252525101010101010

a +-0,40,2


Patented Worldwide.

W4

38

a

b

MADE IN SPAIN

Ø

S

L

h

W4



Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferencieW4

030147300301451003014529030147480301453703014545030145530301456103014570030145880301459603014609030146170301462503014633030146410301465003014668030146760301468403014692030147050301471303014721

L

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634,634,634,634,634,634,634,6


4,65,65,65,66,56,57,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,0


45454035353025201714121087654322

1,81,81,61,6

BoxQuantity

505050505050505050252525252525252525101010101010

Information

The ASFA-S W4 hose clip combines an innovative housing and a sturdy 12mm band which together make this a high performance hose c l ip . The co ld- formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from any damage. The ASFA-S W4 hose c l ip complies fully with the DIN 3017 norm and also with the R o H s d i r e c t i v e E U 20032/95/EC dated 1st July 2006.Crafted entirely from AISI-304 stainless steel, this clip is ideally for use in marine appl icat ions or in any industrial assemblies where high levels of corrosion resistance are required.


Patented Worldwide


s+0,5

0,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,8

h

111111111111111111111111111111111111111111111111

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

b max.

181818181818181818181818181818181818181818181818

Packing

4004004004004004004005050

200200200252525252525101010101010

a +-0,40,2

Materials


Band and Housing: X5CrNi1810 Stainless steel(DIN 1.4301) (AISI-304) (A2)

W5

39

a

b

MADE IN SPAIN

Ø

S

L

h

W5



Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferenceW5

030177200301750003017519030177380301752703017535030175430301755103017560030175780301758603017594030176070301761503017623030176310301764003017658030176660301767403017682030176900301770303017711

Lmax.

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634,634,634,634,634,634,634,6


4,65,65,65,66,56,57,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,07,0


45454035353025201714121087654322

1,81,81,61,6

BoxQuantity

505050505050505050252525252525252525101010101010

Information

The ASFA-S W5 hose clip combines an innovat ive housing, a sturdy 12mm band and is made entirely of AISI-316 stainless steel. The cold-formed stamped band thread, smoothed on the underside, combined with beveled band-edges protects the hose from any damage. The ASFA-S W5 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 20032/95/EC dated 1st July 2006.Crafted entirely from AISI-316 stainless steel, this clip is ideally for use in the mar ine, petrochemical and foodstuffs sectors, where only the highest quality Stainless steel is acceptable due to the extreme application conditions.


Patented Worldwide


s± 0,5

0,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,80,8

hmax.

111111111111111111111111111111111111111111111111

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

b max.

181818181818181818181818181818181818181818181818

Packing

4004004004004004004005050

200200200252525252525101010101010

a +-0,40,2

Materials


Band and Housing: X5CrNiMo 17.12.2 Stainless steel(DIN 1.4401) (AISI-316) (A4)

E

G

B

C

H

A

F

D

40

MADE IN SPAIN

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

140,0

0

70,0




Smooth band underside which avoids damage to the hose.

Beveled band edges to avoid the clip cutting into the hose.

Cold formed stamped band thread which gives a very good grip due to the fact that the thread is deeper than the thickness of the material used.

The exclusive design of the housing keeps the screw in firm contact with the band and means that the ASFA-L gives great performance.

The compact housing grips the screw preventing lateral movement during tightening.

The screw was designed to take a lot of torque and can be tightened using a variety of different tools.

All Mikalor hose clips are marked with the application range, material, the Mikalor logo and the country of manufacture in compliance with DIN 3017.

Manual or automatic assembly.

B

C

D

E

A

F

G

H


S2

89,999,0

S3

85,594,5

S4

75,884,6

S5

64,271,5

S6

68,076,0

S7

62,070,0

S8

82,0117,0

Average

75,087,4

S1

77,786,3

Sectors

3 Nm3,5 Nm

Polar Diagram


ASFA-L worm-drive hose clips

E

H

B

C

I

A

F

D

41

G

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

120,0

0

60,0







The screw was designed to take a lot of torque and can be tightened using a variety of different tools.

The 12mm band gives extra clamping force compared to the 9mm version.



B

C

D

E

A

F

G

H

I

S2

91,7101,5

S3

80,189,5

S4

76,885,3

S5

67,475,1

S6

62,269,7

S7

41,146,8

S8

97,0110,0

Average

75,083,8

S1

63,892,7

Sectors

4 Nm4,5 Nm

Polar Diagram


ASFA-S worm-drive hose clips

High Pressure

44

W1 b

a

44-47

e

Pat.

S

Ø d

r

W1

High Pressure series

Super Heavy-Duty Hose Clamp


Patented Worldwide

Ø Applicationd mm

17-1920-2223-2526-2829-3132-3536-3940-4344-4748-5152-5556-5960-6364-6768-7374-7980-8586-9192-97

98-103104-112113-121122-130131-139140-148149-161162-174175-187188-200201-213214-226227-239240-252

ReferenceW1

030182630301827103018280030182980301830003018319030183270301833503018010030180280301803603018044030180520301806003018079030180870301809503018108030181160301812403018132030181400301815903018167030181750301818303018191030182040301821203018220030182390301824703018255

r

M5M5M5M5M6M6M6M6M7M7M7M7M7M7M8M8M8M8M8M8M8M8M8

M10M10M10M10M10M10M10M10M10M10


4,54,54,54,58888

16161616161625252525252525252550505050505050505050


48484545424240404444404036362828282020201212129996663333

BoxQuantity

505050505050505050502525252525252525252525252510101010101010101010

Information

Mika lor was the f i rs t company to design and produce a heavy-duty hose clamp, and since then the Super clamp has gone from strength to strength. The high strength 8.8 grade steel nut and T-bolt mean that Super can be tightened up hard using many different kinds of tool, while the beveled edges protect the hose from harm.The Super clamp is in its element in agricultural applications, waste water extraction, mining, quarrying or on other sectors where a rugged yet competitively priced heavy-duty clamp is required.

Super Heavy-duty hose clamp W1

e

8888

1010101011111111111113131313131313131317171717171717171717

a

18 +0,2

18 +0,2

18 +0,2

18 +0,2

20 +0,3

20 +0,3

20 +0,3

20 +0,3

22 +0,2

22 +0,2

22 +0,2

22 +0,2

22 +0,2

22 +0,2

24 +0,4

24 +0,4

24 +0,4

24 +0,4

24 +0,4

24 +0,4

24 +0,4

24 +0,4

24 +0,4

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

26 +0,5

b

19,819,819,819,822222222

24,524,524,524,524,524,526,526,526,526,526,526,526,526,526,529292929292929292929

Packing

4004004004005050505050502525252525252525252525252510101010101010101010

s

0,60,60,60,60,80,80,80,81,21,21,21,21,21,21,51,51,51,51,51,51,51,51,51,71,71,71,71,71,71,71,71,71,7

Materials

T-Bolt: 8.8 grade steelYellow-zinc plated

Band and Bridge: Mild steelYellow zinc-plated

Washer and Trunions: Mild steelYellow zinc-plated

SECTION A-A

W2

45

W2

Pat. A

A

Ø d

43-47

be

a

8.8r


Supra Heavy-Duty Hose Clamp Stainless Steel

Ø Applicationd mm

17-1919-2121-2323-2525-2727-2929-3131-3434-3737-4040-4343-4747-5151-5555-5959-6363-6868-7373-7979-8585-9191-97

97-104104-112112-121121-130130-140140-150150-162162-174174-187187-200200-213213-226226-239239-252

ReferenceW2

030190120301902003019039030190470301905503019063030190710301908003019098030191000301911903019127030191350301914303019151030191600301917803019186030191940301920703019215030192230301923103019240030192580301926603019274030192820301929003019303030193110301932003019338030193460301935403019362

r

M6M6M6M6M6M6M7M7M7M7M7M7M7M7M7M7M7M8M8M8M8M8M8M8M8M8

M10M10M10M10M10M10M10M10M10M10


101010101010131313131316161616161630303030303030303045454545454545454545


45454545454540404040403636363636362828282020201212129996663333

BoxQuantity

505050505050505050505050502525252525252525252525252510101010101010101010

Information

The Supra range is the natural evolution of the Super W1 Clamp. Due to its revolutionary swiveling bridge, Supra W2 can be mounted in the most awkward applications without having to remove the hose. It can be opened up and fastened again when in place without dislodging any other parts of the clamp, making assembly much easier. Thanks to the beveled edges, the hose is protected from damage. The Supra W2 clamp complies fully with the RoHs directive EU 20032/95/EC dated 1st July 2006.The high-strength bolt, designed and manufactured by Mikalor specifically for this clamp, together with the captive nut and spacer system allow you to clamp the most demanding of hose assemblies. This is the clamp of choice for professionals in the industrial hose, automotive and agricultural machinery sectors as well as in all industrial applications where an outstanding and above all reliable heavy-duty clamp is required.


Patented Worldwide

Supra Heavy-duty hose clamp W2

e

888888

101010101010101010101013131313131313131315151515151515151515

a

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

b

19,819,819,819,819,819,82222222222222222222222

27,527,527,527,527,527,527,527,527,531313131313131313131

Packing

400400400400400200505050505050502525252525252525252525252510101010101010101010

SECTION A-A

Materials

Band and Bridge: X6Cr17 Stainless steel(DIN 1.4016) (AISI-430)

Bolt: Qst 36-3 Mild steel (DIN 1.0213)Silver-white Cr3 Zinc-Plated

W4

46

W4

Pat. A

A

Ø d

43-47

be

a

8.8r


Supra Heavy-Duty Hose Clamp Stainless Steel

Ø Applicationmm

17-1919-2121-2323-2525-2727-2929-3131-3434-3737-4040-4343-4747-5151-5555-5959-6363-6868-7373-7979-8585-9191-97

97-104104-112112-121121-130130-140140-150150-162162-174174-187187-200200-213213-226226-239239-252

ReferenceW4

030130160301302403013032030130400301305903013067030130750301308303013091030131040301311203013120030131390301314703013155030131630301317103013180030131980301320003013219030132270301323503013243030132510301326003013278030132860301329403013307030133150301332303013331030133400301335803013366

r


M10M10M10M10M10M10M10M10M10M10

Max. Values*Torque (Nm

101010101010121212121212161616161630303030303030303045454545454545454545


40404040404035353535353530303030302020201515151010106663333333

BoxQuantity

505050505050505050505050502525252525252525252525252510101010101010101010

Information

The Supra range is the natural evolution of the Super W1 Clamp. Due to its revolutionary swiveling bridge, Supra W4 can be mounted in the most awkward applications without having to remove the hose. It can be opened up and fastened again when in place without dislodging any other parts of the clamp, making assembly much easier. Thanks to the beveled edges, the hose is protected from damage. The Supra W4 clamp complies fully with the RoHs directive EU 20032/95/EC dated 1st July 2006.The stainless steel bolt together with the captive nut and spacer system allow you to clamp the most demanding of hose assemblies. Supra W4 is a full stainless steel clamp, destined for demanding applications where high corrosion resistance is vital.This top of the range heavy-duty clamp is ideal for marine applications and the foodstuffs industry, as well as for countless industrial applications where AISI-304 stainless steel is specified.


Patented Worldwide

Supra Heavy-duty hose clamp W4

e

888888

111111111111111111111113131313131313131315151515151515151515

a

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

b

19,819,819,819,819,819,82222222222222222222222

27,527,527,527,527,527,527,527,527,531313131313131313131

Packing

400400400400400200505050505050502525252525252525252525252510101010101010101010

SECTION A-A

Materials

Band and Bridge: X5CrNI 1810 Stainless steel(DIN 1.4301) (AISI-304) (A2)

Bolt: AISI 302 Cu Stainless steel

W5

47

W5

Pat. A

A

Ø d

43-47

be

a

8.8r

High Pressure Series

Supra Heavy-Duty Hose Clamp AISI-316 Stainless Steel

Ø Applicationmm

17-1919-2121-2323-2525-2727-2929-3131-3434-3737-4040-4343-4747-5151-5555-5959-6363-6868-7373-7979-8585-9191-97

97-104104-112112-121121-130130-140140-150150-162162-174174-187187-200200-213213-226226-239239-252

ReferenceW5

03013614030136220301363003013649030136570301366503013673030136810301369003013702030137100301372903013737030137450301375303013761030137700301378803013796030138090301381703013825030138330301384103013850030138680301387603013884030138920301390503013913030139210301393003013948030139560301 3964

r


M10M10M10M10M10M10M10M10M10M10


101010101010121212121212161616161630303030303030303045454545454545454545


40404040404035353535353530303030302020201515151010106663333333

BoxQuantity

505050505050505050505050502525252525252525252525252510101010101010101010

Information

The Supra range is the natural evolution of the Super W1 clamp. Due to its revolutionary swiveling bridge, the Supra W5 clamp can be mounted in the most awkward applications without having to remove the hose. Once mounted, it can be opened up and fastened again without dislodging or losing any of the other components of the clamp, making assembly much easier.Thanks to the beveled edges, the hose is protected from damage. The Supra W5 clamp complies fully with RoHs directive EU 2002/95/EC dated 1st July 2006.The AISI 316 stainless steel bolt together with the captive nut and spacer system allow you to clamp the most demanding of assemblies.Supra W5 is a full stainless steel clamp destined for demanding applications where very high corrosion resistance is vital.This top of the range heavy-duty clamp is ideal for marine a p p l i c a t i o n s , f o o d s t u f f manufacture, pharmaceutical and petro-chemical industries and other applications where AISI 316 stainless steel fittings are required.

The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.

Patented Worldwide.

Supra Heavy-Duty hose clamp W5

e

888888

111111111111111111111113131313131313131315151515151515151515

a

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

b

19,819,819,819,819,819,82222222222222222222222

27,527,527,527,527,527,527,527,527,531313131313131313131

Packing

400400400400400200505050505050502525252525252525252525252510101010101010101010

Materials

Band and Bridge: X5 Cr NI MO 17.12.2(DIN 1.4401) (AISI 316) (A4)Stainless Steel

Bolt: AISI 316 Cu (A4)Stainless steel

SECCION A-A

48

D

C

F

B

G

I

E

A

H




49


The design of the Supra heavy-duty clamp allows you to clamp the most demanding of applications. Supra complies with DIN 3017-3.

The welding spots at both band ends guarantee a perfect bond meaning that Supra gives excellent response in applications which require very high torque.

High resistance bolt designed to take a lot of torque.


Swiveling bridge makes it easy to mount and dismount Supra.

Beveled band edges protect the hose from damage.

The revolutionary design makes it impossible to dislodge the nut and trunions.

Flexible material allows Supra to adapt to the application zone, thereby guaranteeing a leak-proof assembly.

All Supra Clamps are marked with the application range, material and the Mikalor logo.

B

C

D

E

A

F

G

H

I


Supra Heavy-Duty Clamp

Special Clipsand Clamps

W1

52

W1

d

h

DIN 3021

Heavy-duty Spring band clip DIN 3021

Nom. dmm

1719202123242526272931323536383940424344464750515355

Ø mind1

15,217,818,419,521,022,023,024,325,027,028,529,331,532,534,535,035,537,238,038,540,541,043,544,046,046,8

Packing

800800800800800800800800800800800800800800800800800400400400400400400400400400

Box Quantity

200200200200200200200200200200200200200200200200200100100100100100100 100100100

Information

The heavy-duty spring-band clamp is manufactured according to DIN 3021. This c l amp i s espec ia l l y r e c o m m e n d e d f o r a p p l i c a t i o n s w h e r e temperature can vary from -40ºC to +120ºC . The design of this clamp means that it can maintain the same radial force despite t h e s e c h a n g e s i n temperature. It is fast and easy to mount and is also reusable.

Heavy-duty Spring band clip W1

Reference

03031501 03031510 03031528 03031536 03031544 03031552 03031560 03031579 03031587 03031595 03031608 03031616 03031624 03031632 03031640 03031659 03031667 03031675 03031683 03031691 03031704 03031712 03031720 03031739 03031747 03031755

Opening Force N

100200200220220220230250280300280280260250220220220280280280270260260260330320

Ø maxd2

18,320,021,822,524,726,036,828,028,931,522,034,538,029,041,542,042,544,545,546,549,050,053,054,056,058,0

0,851,31,31,31,31,31,51,61,6

1,751,751,751,751,751,751,751,751,91,91,92,02,02,02,02,22,2

h +-0,080,02

* h= thickness before surface treatment.

Materials

Band: 50 CRV4Steel

W1

53

W1

b

a

Ø

Zinc-Plated Mild Steel

Exhaust Clamp

Ø Applicationmm

27-3030-3333-3639-4240-4342-4545-4847-5048-5149-5252-5453-5655-5857-5958-6161-6467-7171-74

Reference

030027650300277303002781030027900300279103002802030028100300282903002837030028450300285303002861030028700300288803002896030029090300291703002925

Box Quantity

10010010010010010010010050505050505050505050

Information

This c lamp has been designed specifically for use in automotive applications as its name suggests. It is used to join safely and securely two metal tubes subject to constant high temperatures and vibrat ion, thereby avoiding leaks of exhaust fumes.

ATE W1 Exhaust Clamp

Ø min. mm

273033394042454748495253555758616771

Packing

400400400400400400400400200200200200200200200200200200

a 0,2

1,51,52,02,02,52,52,52,52,52,52,52,52,52,52,52,53,03,0

+-b

0,5

303336424345485051525456585961647174

+-

MaterialsBolt: 8.8 grade steel white zinc-plated

Band:St34 (DIN 2393C) Steel

54

W4

W4

S

L

h

a

b

Light series

9mm L-band Stainless steel Worm-drive clip Double Bridge Clip

ReferenceW4

0301409A0301410A0301411B0301412B0301415B0301417B0301419B

Application Ø mm

50-7060-8070-90

80-100100-120120-140140-160

bMax.

14141414141414

BoxQuantity

10010010050252525

Information

The Double Bridge clip was developed by the Mikalor R&D Department due to requirements from the ventilation sector for a clamp suitable for spiral hose. This is just one example of how we put our engineering know-how at the service of our customers. We work t o g e t h e r w i t h o u r customers to design and craft the solution to their needs in each case. The Double-Bridge clip is manufactured in AISI-304 stainless steel.

Double Bridge Clip

Packing

10010010050505050

L

25,625,625,625,625,625,625,6

9999999

a +-0,30,2

h

10101010101010

*The maximum appl icat ion pressure can vary depending on the type of hose used and the geometry of the coupling.

Patented Worldwide

Materials

Screw: AISI-304 Cu (A2) Stainless steel

Band and Housing: X5CrNi 1810 Stainless steel(DIN 1.4301) (AISI-304) (A2)

55

a

b

MADE IN SPAIN

Ø

S

L

h

T I

100% Titanium

Titanium S-band Worm-drive Hose clip

Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

Reference

030095020300951003009529030095370300954503009553030095610300957003009588030095960300960903009617030096250300963303009641030096500300966803009676030096840300969203009705030097130300972103009730

Lmax.

29,629,629,629,629,629,631,631,631,631,631,631,631,634,634,634,634,634,634,634,634,634,634,634,6


5,06,06,06,07,07,07,57,57,57,57,57,57,57,57,57,57,57,57,57,57,57,57,57,5


4747423737322621181513118,57,46,35,34,23,22,12,11,91,91,71,7

BoxQuantity

444444444444444444444444

Information

The use of T itanium in the manufacture of this clip, together with the innovative design of the housing and the 12mm bandwidth mean that the Titanium clip gives superlative comparative results in weight, performance and corrosion resistance, not just compared with the rest of the Mikalor worm-drive range, but wi th wor ldwide competition included.We can supply all dimensions from 16-27 up to 220-240 thanks to the revolut ionary manufactur ing process.Due to the combination of its extraordinary low weight, increased pressure values and corrosion r e s i s t a n c e , t h i s c l i p i s recommended f o r use i n competition engines, whether they are on land, in the sea or in aircraft.Each Titanium clip is subject to individual quality control using automatic control systems to ensure that all parameters function to perfection.Titanium clips are hand-packed in boxes of 4 units per diameter, which include an instruction manual and technical specification sheet.This clip conforms to all EU norms and directives.We can truthfully say that we believe the Titanium clip to be the world’s finest hose clip

Titanium-TI Hose Clip (12 mm bandwidth)

s+0,1 0

1,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,0

h

111111111111111111111111111111111111111111111111

12,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,212,2

b max.

181818181818181818181818181818181818181818181818

Packing

242424242424242424242424242424242424242424242424

a +-0,40,2


Patented Worldwide

TI - MaterialsScrew: Ti-3 (3.7055) S/ASTM B 265-79

Band:Ti-2 (3.7035) S/ASTM B 265-79

Housing:Ti-1 (3.7032) S/ASTM B 265-79

W4

56

a

b

W4

Black finish

Stainless steel inner-rings for ASFA-L worm-drive hose clips

Ø Applicationmm

8-1612-2216-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160

ReferenceBlack

730310157303102373031031730310407303105873031066730310747303108273031090730311037303111173031120730311387303114673031154730311627303117073031189

Box Quantity

2002002002001001001001001001005050252525252525

Information

This inner ring for ASFA-L worm-drive clip was designed to give extra protection to the hose, especially in applications where changes in the frequency of vibration can be an issue. The r ing also contr ibutes to an even distribution of pressure around the hose and confers a constant tension function to the clip. The black coating helps to ensure that the rings adapts correctly to the hose assembly.

Inner Rings for ASFA L clips W4

Packing

100080080080080080080040010010040040020020025252525

ReferencePlain

030310180303102603031034030310420303105003031069030310770303108503031093030311060303111403031122030311300303114903031157030311650303117303031181

a0,5

13,513,513,513,513,513,513,513,513,513,513,513,513,513,513,513,513,513,5

+-b

0,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,25

MaterialsBand: Stainless Steel(AISI-301)

Finish: Black Teflon or Stainless steel

W4

57

a

b

W4

Black Finish

Stainless steel inner-rings for ASFA-S worm-drive hose clips

Ø Applicationmm

16-2720-32254030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130120-140130-150140-160150-170160-180170-190180-200190-210200-220210-230220-240

ReferenceBlack

730312187303122673031234730312427303125073031269730312777303128573031293730313067303131473031322730313307303134973031357730313657303137373031381730313907303140273031410730314297303143773031445

Box Quantity

100100100100100100100100100252525252525252525101010101010

Information

This inner ring for ASFA-S worm-drive clip was designed to give extra protection to the hose, especially in applications where changes in the frequency of vibration can be an issue. The r ing also contr ibutes to an even distribution of pressure around the hose and confers a constant tension function to the clip. The black coating helps to ensure that the rings adapts correctly to the hose assembly.

Inner Rings for ASFA S clips W4

Packing

4004004004004004004005050200200200252525252525101010101010

a0,5

16,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,516,5

+-b

0,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,250,25

ReferencePlain

030312100303122803031236030312440303125203031260030312790303128703031295030313090303131703031325030313330303134103031350030313680303137603031384030313920303140503031413030314210303143003031448

MaterialsBand: Stainless Steel(AISI-301)

Finish: Black Teflon or Stainless steel

58

a

Ø

S

L

h

b

W3

DIN: 3017 Light Series black

W3 MaterialsScrew: (AISI-430)Stainless steel

Band and housing: Stainless steel X6Cr-17(DIN 1.4016) AISI 430

Finish: Black


Ø Applicationmm

8-1612-2216-2720-3225-4030-4532-5040-6050-7060-80

Reference

73016011730160207301603873016046730160627301607073016089730160957301610073016118

bMax.

14141414141414141414

BoxQuantity

200200200200100100100100100100

Information

Thanks to the exclusive design of the housing, the ASFA LW3 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped band thread, smoothed on t he unde r s i de , combined with the beveled band edges protects the hose from any damage.The ASFA-L W3 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 2002/95/EC dated 1st July 2006.The special black finish gives added corrosion resistance and makes this cl ip very popular in automotive and defense applications, as well as in the manufacture o f agricultural machinery.

ASFA L Hose Clip W3 (9mm bandwidth)

Lmax.

22,122,123,623,625,625,625,625,626,626,6

s + 0,10

0,60,60,70,70,70,70,70,70,70,7


3,03,03,53,54,04,04,04,04,04,0


45454236322824191715

hmax.

10101010101010101010

Packing

800800800800800800800400100100

* The maximum application p r e s s u r e c a n v a r y depending on the type of hose used and t he geometry of the coupling.

Patented Worldwide.

a +-0,30,2

9999999999

a

b

MADE IN SPAIN

Ø

S

L

h

59

W3

DIN: 3017 Heavy Series black

W3 MaterialsScrew: (AISI-430) Stainless steel

Band and housing: Stainless steel X6Cr-17(DIN 1.4016) AISI 430

Finish: Black


Ø Applicationmm

16-2720-3225-4030-4532-5040-6050-7060-80

Reference

7301620673016214730162227301623073016249730162577301626573016273

bMax.

1818181818181818

BoxQuantity

5050505050505050

Information

Thanks to the exclusive design of the housing, the ASFA SW3 hose clip has excellent performance while being at the same time very compact. The cold-formed stamped band thread, s m o o t h e d o n t h e underside, combined with the beveled band edges protects the hose from any damage.The ASFA-S W3 hose clip complies fully with the DIN 3017 norm and also with the RoHs directive EU 2002/95/EC dated 1st July 2006.The special black finish gives added corrosion resistance and makes this c l ip very popu la r in automotive and defense applications, as well as in t he manu fac tu re o f agricultural machinery.

ASFA-S W3 Hose Clip (12mm bandwidth)

Lmax.

29,629,629,629,629,629,631,631,6

s + 0,10

0,80,80,80,80,80,80,80,8


4,25,25,25,26,06,06,86,8


4545403535302520

hmax.

1111111111111111

Packing

40040040040040040040050


Patented Worldwide.

12,212,212,212,212,212,212,212,2

a +-0,30,2

60

W3

a

b

MADE IN SPAIN

Ø

S

L

h

DIN: 3017 heavy series

W3 Materials

Screw: (AISI-430)Stainless steel

Band and Housing: X6Cr-17Stainless steel(DIN 1.4016) (AISI 430)

Spring-loaded insert: (AISI-301)Stainless steel

S-band Constant tension worm-drive clip

Ø Nominalmm

16-2720-3225-4030-4532-5040-6050-7060-8070-90

80-10090-110

100-120110-130

ReferenceW3

03017800030178180301782603017834030178420301785003017869030178770301788503017893030179060301791403017922

Lmax.

29,629,629,629,629,629,631,631,631,631,631,631,631,6


4,55,55,55,56,36,37,07,07,07,07,07,07,0


4747423737322722181513119

BoxQuantity

2002001001001001001001005050252525

Información

The main difference between the W3 constant tension worm-drive and the standard Mikalor worm-drive is to be found in the inner-ring insert incorporating a spring. This s p r i n g - l o a d e d i n s e r t maintains constant pressure around the hose in case of sudden va r i a t i ons i n temperature and /or vibration thereby avoiding leaks.The fact that this clamp guarantees leak-proof hose assembl ies wi th both gaseous fluid and liquids m a k e s i t i d e a l f o r applications in car, tractor or heavy machinery engines. M o re o v e r, t h e n o n -perforated cold formed band together with the rounded band edges make sure that no damage occurs to the hose. This clip complies fully with the DIN 3017 norm and also with the RoHs directive EU/2002/95/EC dated 1st July 2006.

ASFA-S W3 Constant tension worm-drive Hose Clip (12mm bandwidth)

s + 0,10

0,80,80,80,80,80,80,80,80,80,80,80,80,8

hmax.

11111111111111111111111111

b max.

18181818181818181818181818


12,212,212,212,212,212,212,212,212,212,212,212,212,2

a +-0,30,2

* The bandwidth does not take into account the spring-loaded insert.* This can also be manufactured in 9mm L-band.

ØApplication

13-2317-2822-3627-4129-4637-5647-6657-7667-8677-96

87-10697-116

107-126

W2

61

Pat.

r

Ø d

43-47

be

a

8.8

W2


Supra CT Constant Tension Heavy-Duty Hose Clamp Stainless steel

Ø Applicationmm

17-1919-2121-2323-2525-2727-2929-3131-3434-3737-4040-4343-4747-5151-5555-5959-6363-6868-7373-7979-8585-9191-97

97-104104-112112-121121-130130-140140-150150-162162-174174-187187-200200-213213-226226-239239-252

ReferenceW2

030201000302011803020126030201340302014203020150030201690302017703020185030201930302020603020214030202220302023003020249030202570302026503020273030202810302029003020302030203100302032903020337030203450302035303020361030203700302038803020396030204090302041703020425030204330302044103020450

r


M10M10M10M10M10M10M10M10M10M10


4,54,54,54,54,54,58,08,08,08,08,0

10,010,010,010,010,010,025,025,025,025,025,025,025,025,025,050,050,050,050,050,050,050,050,050,050,0


50504848454542424040383836363434342828282020201212129996663333

BoxQuantity

505050505050505050505050502525252525252525252525252510101010101010101010

Information

T h e S u p r a C T c l a m p incorporates a series of AISI-304 Stainless steel spring washers to the outstanding Supra W2 c lamp. Th is specialized version of the Supra W2 is used in applications subject to vibration and/or great variations in temperature and which cause the components of a hose assembly to expand and contract. Thanks to the spring washer system, the Supra CT maintains constant pressure around the hose and prevents leakage. The beveled edges protect the hose from damage. The Supra CT clamp complies fully with the RoHs directive EU 20032/95/EC dated 1st July 2006.This clamp is generally fitted in high-powered diesel engines in heavy machinery, trucks, buses, marine engines and diesel-powered generators as well as in various other industrial applications where expansion and con t rac t i on cause assemblies using standard clamps to leak.


Patented Worldwide

Supra CT W2 Stainless Steel

e

101010101010111111111111111111111113131313131313131317171717171717171717

a

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

18 +0,2

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

20 +0,3

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

25 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

28 +0,4

b

19,819,819,819,819,819,822,022,022,022,022,022,022,022,022,022,022,027,527,527,527,527,527,527,527,527,531,031,031,031,031,031,031,031,031,031,0

Packing

400400400400400200505050505050502525252525252525252525252510101010101010101010

Materials

Band and Bridge: X6Cr17 Stainless steel(DIN 1.4016) (AISI-430)

Sreew: 8.8 grade steelSilver-white Cr3 Zinc-Plated

Washers and Trunions: AISI 304 Stainless steel

SECTION A-A

62

GH

D

A

B

E

C

B

E

A

C

D

F

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

140,0

0

70,0

S-1 S-2

S-3

S-4

S-5

S-8

S-7

S-6

6,0

0

3,0


Manufactured in 100% Titanium, this clamp offers the greatest resistance to pressure and corrosion of any equivalent clamp on the market, as well as being the lightest of its kind.

The screw is also manufactured in Titanium and can take a great deal of torque.




The exclusive design of the housing keeps the screw in firm contact with the band and means that the ASFA-TI gives great performance.


All ASFA TI hose clips are marked with the application range, material, the Mikalor logo and the country of manufacture.

B

C

D

E

A

F

G

H

S2

71,097,6

S3

93,0123,0

S4

86,0113,6

S5

77,0103,6

S6

76,0102,2

S7

71,3101,4

S8

101,0137,0

Average

81,4109,2

S1

90,0113,0

Sectors

4 Nm5 Nm

Polar Diagram

S2

2,9

S3

3,6

S4

1,5

S5

4,2

S6

2,6

S7

2,2

S8

6,0

Average

3,1

S1

2,3

Sectors

Force Kg

Polar Diagram



The design of this clamp means that it can maintain the same radial force despite changes in temperature and/or pressure.

Safety feature to avoid excessive pressure when mounting which could damage the clamp.

Quick and easy to mount.

Quick and easy to mount.


B

C

D

A

E

ASFA TI Titanium S-band worm-drive hose clip

Heavy-duty spring-band clip DIN 3021

S-1

S-2

S-3

S-4

S-5

S-8

S-7

S-6

120,0

0

60,0

63

C

D

A

E

B

I

H

F

G

A

B

EF

CD

G

H

C

The spring-loaded insert maintains constant pressure around the hose in case of sudden variations in temperature and /or pressure thereby avoiding leaks.




The screw was designed to take a lot of punishment and can be tightened using a variety of different tools.

The exclusive design of the housing keeps the screw in firm contact with the band and means that the ASFA-L gives great performance.



The spring insert is fixed to the band in such a way that it automatically adjusts while tightening thus optimizing performance.

B

C

D

E

A

F

G

H

The Supra CT incorporates a series of stainless steel spring washers which allow the clamp to maintain constant pressure around the hose despite extreme variations of temperature and pressure.

The welding spots at both band ends guarantee a perfect bond meaning that Supra gives excellent response in applications which require very high torque.

High resistance bolt designed to take a lot of torque.

Swiveling bridge makes it easy to mount and dismount Supra.

Beveled band edges protect the hose from damage.

The revolutionary design makes it impossible to dislodge the nut and trunions.

Flexible material allows Supra to adapt to the application zone, thereby guaranteeing a leak-proof assembly.


All Supra Clamps are marked with the application range, material and the Mikalor logo.

B

C

D

E

A

F

G

H

I

I


S2

83,098,2

S3

87,4106,0

S4

102,0116,0

S5

75,093,6

S6

76,295,4

S7

70,089,0

S8

107,0123,0

Average

87,0101,8

S1

95,0112,0

Sectors

5 Nm6 Nm

Polar Diagram


S-band Constant tension worm-drive clip

Supra CT Constant Tension Heavy-duty hose clamp

Assortment Boxes and

Display Units

66

38 cm.

27 c

m.

8 cm.

DIN 3017

Materials

Case:Yellow PVC

Insert:High impact red polypropylene

Worm-Drive Hose Clip Assortment Boxes

Reference

03503010035030280350304403503060035030870350309503503108

Series

LIGHTLIGHTLIGHTLIGHTHEAVYHEAVYHEAVY

MaterialQuality

W1W2W4W5W1W2W4

Information

With the aim of providing you with the hose clip which most adequately suits your needs, we have developed a wide range of hose clip assortment boxes.The different diameters of clip are arranged in individual compartments, making it easy to find the appropriate size.The sturdy plastic case is also very convenient for transporting the product.All assortment boxes include a flexible hex-socket screwdriver which can be used to torque up Mikalor worm-drive clips in all sorts of application zones.

Contents

Ø8-16 Pcs

60606060---

Ø12-22 Pcs

40404040---

Ø16-27 Pcs

40404040252525

Ø20-32 Pcs

20202020202020

Ø25-40 Pcs

20202020121212

Ø30-45 Pcs

20202020---

Ø32-50 Pcs

10101010888

Ø40-60 Pcs

10101010666

Ø50-70 Pcs

6666666

Ø60-80 Pcs

----555

Ø70-90 Pcs

----555

Flexidriver

1111111

67

38 cm.

92 c

m.

10 cm.

DIN 3017

Materials

Display:High resistance PS plastic

Color:Yellow

Worm-Drive Hose Clip Display Units

Reference

025001910250007902500087025001400250016702500183

Series

LIGHTLIGHTLIGHTHEAVYHEAVYHEAVY

MaterialQuality

W1W2W4W1W2W4

Information

Our range of wall-displays is one of the most complete on the market, meaning that you can choose the one which most suits your needs and the space at your disposal.The design of these easy to use wall displays, which are both attractive and well-organized, makes them an ideal sales tool.

Contents

Ø8-16 Pcs

200200200

---

Ø12-22 Pcs

200200200

---

Ø16-27 Pcs

200200200

---

Ø20-32 Pcs

200200200505050

Ø25-40 Pcs

100100100505050

Ø32-50 Pcs

100100100505050

Ø40-60 Pcs

100100100505050

Ø50-70 Pcs

100100100505050

Ø70-90 Pcs

---

505050

68

Frontal Ear Clip pliers

Article

Frontal Ear Clip pliers

ReferenceFrontal ear clip pliers

03011088

Box Quantity

1

Frontal ear clip pliers

Packing

1

Information

These pliers can be used to fasten all types of ear clip. The Frontal model is fast and easy to use and can be used in the majority of cases. It is also known as the “Russian” model

Lateral Ear Clip Pliers

Article

Frontal and lateral ear clip pliers

ReferenceLateral Ear clip pliers

03011096

Box Quantity

1

Frontal and lateral ear clip pliers

Packing

1

Information

This lateral model was designed to be used in application zones which are difficult to access. It can be used both frontally and laterally.

Pliers for DIN 3021 Heavy-duty Spring band Clip

Article

Pliers for heavy-duty spring-band clips

ReferenceSpring-band pliers

03031499

Box Quantity

1

Pliers for heavy-duty spring-band clips

Packing

1

Información

Pliers for DIN 3021 heavy-duty spring-band clips. These pliers were specially designed to grip the DIN 3021 clip firmly during assembly.

69

Application tool for preformed clamps

Article


ReferencePreformed clamp application tool

03002015

Box Quantity

1


Packing

1

Information

Application tool for preformed clamps. This tool is very easy to use. It incorporates a function which regulates tension in the band and cuts the band end automatically.

Pliers for Clip clamp

Article

Frontal pliers for Clip clamp

ReferenceClip clamp pliers

03030390

Box Quantity

1

Frontal pliers for Clip clamp

Packing

1

Information

Pliers for the complete Clip clamp range.

Pneumatic pliers for Clip clamp

Article


ReferencePneumatic pliers for Clip clamp

03030402

Box Quantity

1


Packing

1

Information

Pneumatic pliers for use with the complete range of Clip clamps. Ideal for use on assembly lines. Working pressure: 5 bars. Total weight : 650grs

D.L

.: B

-?-?

Much

more

tha

n ju

st c

lam

ps

Much

more

tha

n ju

st c

lam

ps

Garraf, 10-12 · Pol. Ind. Pla de la Bruguera08211 CASTELLAR DEL VALLÈS (Barcelona) Spain

Tel. (00-34) 937 299 611 - Fax (00-34) 937 142 [email protected] - www.damesa.es

www.mikalor.com

High - IQ- · PDF fileDIN 3021 Heavy-duty Spring-Band clip ... the best range of hose clips...

Documents

Transcript of High - IQ- · PDF fileDIN 3021 Heavy-duty Spring-Band clip ... the best range of hose clips...