HI-TECH · PDF filetoothpastes as a polishing agent and is a biomaterial. Dibasic calcium...

HI-TECH PROJECTS(An Industrial Monthly Magazine on New Project

Opportunities and Industrial Technologies)

JANUARY 2018 Issue(E-copy)

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 43658117, 45120361

* E-Mail : [email protected], [email protected]* Website: www.eiriindia.org, www.industrialprojects.in * PayTM: 9811437895

Deposit the amount in “EIRI “Account with HDFC BANK CA- 05532020001279 (RTGS/NEFT/IFSC CODE: HDFC0000553) ORICICI BANK CA - 038705000994 (RTGS/NEFT/IFSC CODE: ICIC0000387) OR AXIS Bank Ltd. CA - 054010200006248 (RTGS/

NEFT/IFSC CODE:UTIB0000054) OR UNION BAK OF INDIA CA-307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/NEFT/IFSC CODE: SBIN0001067) AND JUST SMS US ON PH. 09811437895

Hi-Tech Projects,Jan’18, www.eiriindia.org # 03

PROFITABLE INDUSTRIES FOR YOU

ASK FOR ANYPROJECT REPORTAND BANK LOAN:

[email protected]

MATCH BOX INDUSTRY(AUTOMATIC PLANT) [EIRI/3181]The origin of the safety match industry inIndia goes back to the beginning of thiscentury. Around 1910 immigrant Japanesefamil ies who settled in Calcutta beganmaking matches with simple hand- andpower-operated machines. Local peoplesoon learned the necessary skills and anumber of small match factories sprangup in and around Calcutta. These smallmatch factories could not meet the totalrequirements of the country however, andIndia began to import matches fromSweden and Japan. During the First WorldWar, when Swedish matches could not beimported, the Indian market was fed mainlyby imported matches from Japan and bythe locally made ones which followed theJapanese pattern introduced in Calcutta.After the war, factories in Calcutta wereunable to compete with imports, andhandmade match production shifted tosouthern India, especial ly in theRamanathapuram and Tirunelveli districtsof Tamil Nadu State. This shift was due tothe pioneering efforts of P. Iya Nadar andA. Shanmuga Nadar who went to Calcuttato learn the process from Purna ChandraRay, a local businessman, who had learnedthe trade in Germany. The Nadars set up anumber of manual match production unitsin extremely poor regions of Tamil Nadu,where a combination of the dry climate,cheap labour and avai labi li ty of rawmaterials from nearby Kerala created idealconditions for match production.

COST ESTIMATIONPlant Capacity 1,50,000 Match Box/DayLand (1200sq.mt.) Rs. 2.14 Cr.Plant & Machinery Rs. 1.48 Cr.W.C. for 1 Month Rs. 15 LacsTotal Capital Investment Rs. 3.88 Cr.Rate of Return 23%Break Even Point 60%*********************************************

MANUFACTURING SHOES(SAFETY BOOTS & SCHOOL

SHOES) USING RUBBER POWDER[EIRI/3182]

Safety Boots are wide term and are subdivided into differet types of boots likecombat boots, Jungle boots, high altitudeboots etc. The requirement is increasingday by day. In addition to this boots with orwithout deviation are used by mines andsteel workers. Police and Para Mil itaryforces, as such, there is wide scope formarketing this product. School shoes areused for protecting the children foot frominjuries due to stones nails, broken glasspieces infection from dust diet, mud, waterand to feel conform during differentclimatic condition. Chi ldren shoes inparticular are very important in order tosave the foot. School shoes are verycommon part of school uniform introducedby many Government and Public School.

Canvas shoes are used as footwear by allgroups of people. It is made of thick clothand sole of soft rubber sheets. Largenumber of variations in quali ty ofcanvas sheet and sole materials areused for different purposes and sellingprice. Canvas shoes are available indifferent sizes and designs suitableaccording to one's need and liking.

COST ESTIMATIONPlant Capacity 500 Pairs/DayLand (1500 sq.mt.) Rs. 1.66 Cr.Plant & Machinery Rs. 40 LacsW.C. for 2 Months Rs. 48 LacsTotal Capital Investment Rs. 2.64 Cr.Rate of Return 20%Break Even Point 31%*****************************************

WALNUT PROCESSING PLANT(EIRI/3183)

Georgia is considered one of the primarycenters of the origin of walnut. There aregreat prospects for i ts development.Walnut is characterized with highproductivity in mountain areas of East andwest Georgia on the elevation of 500-900m from see level, as well as in high areaof Ratcha-Lechkhumi and East Caucasuspre-mountain areas. Despite thesignificantly suitable natural and soi lconditions for walnut growing in Georgia,demand on local market is more 4-8thousand tons than the in-shel l walnutproduction. That is why an amount ofwalnut is imported from other countries inhigh market prices. Therefore study andtesting of the local germplasm, selectionof high productive varieties and theirextension in farms have great importancefor filling this deficit. This article describesthe materials of walnut germplasm studyfor Georgia. Prospective varieties andadvanced selections are distinguished toeach ecological zones of Georgia. Severalwalnut selections of lateral type and semi-dwarf growth are bread from Georgianwalnut breeding program. The biological,agricultural and pomological description ofselected varieties and new selections arealso mentioned.

COST ESTIMATIONPlant Capacity 15 Tons/DayLand & Building (2 Acres) Rs. 1.94 Cr.Plant & Machinery Rs. 2.63 Cr.W.C. for 1 Month Rs. 21.39 Cr.Total Capital Investment Rs. 26.32 Cr.Rate of Return 45%Break Even Point 33%* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *DICALCIUM PHOSPHATE (FROM

SULPHURIC ACID) CAP: 6TPD[EIRI/3184]

Dicalcium phosphate is the calciumphosphate with the formula CaHPO4 andits dihydrate. The "di" prefix in the commonname arises because the formation of theHPO42– anion involves the removal oftwo protons from phosphoric acid, H3PO4.It is also known as dibasic calcium

phosphate or calcium monohydrogenphosphate. Dicalcium phosphate is usedas a food additive, it is found in sometoothpastes as a polishing agent and is abiomaterial. Dibasic calcium phosphate isproduced by the neutralization of calciumhydroxide with phosphoric acid, whichprecipitates the dihydrate as a solid. At60°C the anhydrous form is precipitated:H3PO4 + Ca(OH)2 ? CaHPO4. To preventdegradation that would formhydroxyapatite, sodium pyrophosphate ortrimagnesium phosphate octahydrate areadded when for example, dibasic calciumphosphate dihydrate is to be used as apolishing agent in toothpaste. In acontinuous process CaCl2 can be treatedwith (NH4)2HPO4 to form the dihydrate:CaCl2 + (NH4)2HPO4 ? CaHPO4•2H2O.A slurry of the dihydrate is then heated toaround 65–70°C to form anhydrousCaHPO4 as a crystal l ine precipitate,typically as flat diamondoid crystals, whichare suitable for further processing.

COST ESTIMATIONPlant Capacity 6 Ton/DayLand & Building (8000sq.mt.) Rs. 4.50 Cr.Plant & Machinery Rs. 4 Cr.W.C. for 2 Months Rs. 93 LacsTotal Capital Investment Rs. 9.69 Cr.Rate of Return 16%Break Even Point 67%**********************************************

RECYCLING OF SYNTHETICMOTOR LUBRICATION OIL

[EIRI/3185]Used oil is exactly what its name implies:any petroleum-based or synthetic oil thathas been used. Oil keeps our cars,lawnmowers, and many other machinesrunning smoothly. However, during normaluse, impurities such as dirt, metalscrapings, water, or chemicals, can getmixed in with the oil, so that in time, the oilno longer performs well. Eventually, thisused oil must be replaced with virgin or re-refined oil to do the job correctly. If youare one of the many people who changetheir own motor oil, you too need to knowhow to properly manage the used oil.

COST ESTIMATIONPlant Capacity 10 KL/DayLand (2000 sq.mt.) Rs. 2.40 Cr.Plant & Machinery Rs. 1.50 Cr.W.C. for 2 Months Rs. 1.94 Cr.Total Capital Investment Rs. 5.94 Cr.Rate of Return 21%Break Even Point 59%********************************************

Top Industries to Start


ELECTRICAL SWITCHES ANDACCESSORIES (POLY

CARBONATE BASED) [EIRI/3186]Switches are the most prominent electricalaccessory that we see in a house.Technical ly a switch is an electricalcomponent that can break electrical circuitby interrupting the current or diverting itfrom one conductor to another. There aredifferent types of electrical switchesbased on Current (Ampere) rating varyingfor 6A to 32A. Today modular switches areavailable in different colours and designsto go with our modular home or office.Switches are broadly categorized into twomain categories –Fixed Configuration.Modular and Fixed Configuration switchesare switches with a fixed number of portsand are typically not expandable. Thiscategory is discussed in further detai lbelow. Cisco Catalyst 2K, 3K and theCisco 300/500 series are good examplesof Fixed Configuration switches. Speciallydesigned polycarbonate switches withsleek design offers an excellent quality tocustomers.

COST ESTIMATIONPlant Capacity 5000 Pieces/DayLand (1500 sq.mt.) Rs. 1.68 Cr.Plant & Machinery Rs. 70 LacsW.C. for 2 Months Rs. 35 lacsTotal Capital Investment Rs. 2.82 Cr.Rate of Return 42%Break Even Point 45%********************************************

ALUMINIUM COMPOSITEPANELS (ACP) [EIRI/3187]

Aluminium Composite Panels (ACP) aremainly light-weight composite materialconsisting of two pre-finished aluminiumcover sheets heat-bonded (laminated) toa core made of polyethylene plasticmaterial , available in 3mm, 4mm, and6mm thicknesses after finishing and canbe curved and bent to form corners. Thesepanels are used widely as exterior coveringof commercial buildings and corporatehouses. While adding to aesthetic beautyof the structure, they are also resistant toacid, alkali salt spray, pollution and providegood thermal as well as sound insulation.These Panels are widely used due easymaintenance in almost any kind of climatethrough normal wash with water and milddetergent that ensures long lastingperformance. Aluminium CompositePanels consist of two thin sheets ofaluminium continuously bonded to apolyethylene core. This polyethylene coreof the aluminium composite panel is facedwith two thin sheets of aluminium. Thealuminium is bonded onto the core duringthe manufacturing process and i t isvirtually impossible to separate the layersof material once they have been bonded.Mirror Finish Aluminium Composite Panel:We supply mirror finish aluminium

composite panel in order to interiordecoration material demand in the market.

COST ESTIMATIONPlant Capacity 2000 sq.mt./DayLand (6000 sq.mt.) Rs. 5.20 Cr.Plant & Machinery Rs. 2.03 Cr.W.C. for 2 Months Rs. 4.36 Cr.Total Capital Investment Rs. 12.15 Cr.Rate of Return 60%Break Even Point 39%*************************************************

BABY SOAP [EIRI/3189]One of the most important things to helpyour baby stay healthy is to keep its skinclean, and baby soaps play a vital role inthis. Especial ly formulated for thesensitive skin of babies, babies soaps arecruelty-free, and contain no animal fats,toxins, preservatives, or dyes. Gentle,sophisticated and natural, baby soaps aremade using quality essential oils, herbs,fragrances, and other natural ingredientsthat can gently clean the skin of babywithout irritating or drying it. Toxic free andgood for baby's skin, these soaps aregenerally fortified with vi tamin E,saponified olive, palm kernel, coconut, andfood-grade vegetable oils. Herbal extracts,spices, butters, sweet milk, goat's milkand buttermilk can also be found in someof the baby soaps that makes a luxurious,rich, thick lather, which is dense andperforating, with character and richness inevery soap bar. Parents are constantlyconcerned with getting the best productsin the market and doing everything rightso that their chi ld is safe and sound.

COST ESTIMATIONPlant Capacity 800 Kg./DayLand & Building (1000sq.mt.) Rs. 1.21 Cr.Plant & Machinery Rs. 25 LacsW.C. for 2 Months Rs. 1.28 Cr.Total Capital Investment Rs. 2.80 Cr.Rate of Return 16%Break Even Point 63%**********************************************

GRANITE CUTTING ANDPOLISHING UNIT [EIRI/ 3190]

Granite Slab and Tiles are used in buildingfor the purpose of wall paneling and forthe decoration of walls. So we focus asthe development of building as well asindustrial or residential. Moving across theshould purposes of a glorious past enrichedwith tradition and skill, India has emergedas nation devoted to industrialdevelopment on sound modern l ines.India's industrial progress present a widespread pattern dotted all over by scoresof modern industries covering wide areasof industrial activities and pulsating withmodern know how and research the widespread popularity of granite ti le usuallymore evident in major public monumentalbuilding of traditional or conservativedesign. The new users of granite ti le arealso steadily appearing. So far, for exteriorgranite is used both structurally and as a

veneer, for certain walls, column facingtrim, for interior, its uses is even morediversified, for nearly every type ofpractical and aesthetic need. A brief listingof interior uses would include floor, stairswall facing, and column toilet, bathroometc. and as decorative for many purposes.In all these areas granite is unexcelled forend using beauty and low maintenance.The granite slab and tiles of different sizeshaving dimension for slap (i) 30cm x30cm, 40cm x 40cm, 60 x 40cm, 80cm x40cm, 90cm x 40cm and for tiles dimensionis 15cm x 10cm, 20cm x 10cm, 30cm x10cm and the thickness for slab shouldbe in range of 18mm to 20mm for ti lesthickness is 7/8mm. It is also used in theconstruction of forts temples, palaces,and other building in South India Ancientforts such as the Janjore Fort in TamilNadu the Golkonda Fort near Hyderabadand Chitradurga and Bel lar Forts inKarnataka are important examples of theuse of granite. The slatue of SriGomateshwari (Bahubal i) atshravanbelgoola in Karnataka is anoutstanding work-piece in granite.

COST ESTIMATION

Plant Capacity 800 sq.mt./DayLand & Building (3 Acres) Rs. 2.20 Cr.Plant & Machinery Rs. 1.04 Cr.W.C. for 2 Months Rs. 5 LacsTotal Capital Investment Rs. 3.89 Cr.Rate of Return 29%Break Even Point 59%*********************************************

BANANA PRODUCTSMANUFACTURE [EIRI/3191]

Banana is a globally important fruit cropwith 97.5 million tones of production. InIndia it supports livelihood of million ofpeople. With total annual production of16.91 million tones from 490.70 thousandha., with national average of 33.5 T/ha.Maharashtra ranks first in production with60 T/ha. Banana contributes 37% to totalfruit production in India. Banana is one ofthe major and economically important fruitcrops of Maharashtra. Bananas occupy20% area among the total area under cropin India. Maharashtra ranks second in areaand first in productivity in India. Jalgaonis a major Banana growing district inMaharashtra which occupy 50,000 hectaresarea under Banana. But most of Bananais grown by planting suckers. Thetechnology development in agriculture isvery fast, it results in developing TissueCulture Technique.

COST ESTIMATIONPlant Capacity 3 Ton/DayLand & Building (3000sq.mt.) Rs. 2.53 Cr.Plant & Machinery Rs. 2 Cr.W.C. for 2 Months Rs. 1.41 Cr.Total Capital Investment Rs. 6.09 Cr.Rate of Return 24%Break Even Point 58%*********************************************

Hi-Tech ProjectsJan’18, www.eiriindia.org # 05

Start Your Own Industry1. B.O.P.P. FILM2. COLOUR MASTER BATCHES FOR

VARIOUS PLASTICS3. DOUGH MOULDING COMPOUND (DMC),

BULK MOULDING COMPOUND (BMC),SHEET MOULDING COMPOUND (SMC)

4. EXPANDED CELLULAR POLYETHYLENESHEET

5. H.D.P.E/P.P. BOX STRAPINGS6. HDPE/PP WOVEN SACKS (BAGS)7. HDPE FISHING NET8. H.D.P.E. AND FITTING PIPES9. HDPE PIPES AND PIPE FITTINGS10. INJECTION & BLOW MOULDED

PLASTIC PRODUCTS11. LAMINATION OF CO-EXTRUSION MULTI

LAYER FILM IN ROLL FORM12. MULTI LAYER CO-EXTRUSION, 3 LAYER

- FILM WITH LAMINATION & PRINTING13. NYLON GRANULES FROM NYLON

WASTE14. NYLON NET FOR GIVING SHADE TO

TEA PLANT IN NURSERY15. PET GRANULES (DANA)16. PLASTIC INJECTION MOULDING

PRODUCTS17. PLASTIC MAT18. PLASTIC MOULDED FURNITURE19. P.V.C. PIPES AND FITTINGS20. PLASTIC FILMS AND SHEETS WITH

PRINTING (FLEXO AND ROTO) LDPE/HDPE/PP/HM/PVC

21. PLASTIC GRANULES FROM FRESHRESIN

22. PLASTIC ROPE23. PLASTIC CORRUGATED SHEET & BOX24. PLASTIC TOOTH PICK25. POLY-VINYL FLOORING26. PLASTIC TARPAULIN27. POLYTHENE BAGS28. PLASTTIC SUTLI OR POLYPROPYLENE

SUTLI29. PVC EXTRUSION PROFILES (WIRING

CHANNELS)30. POLY CARBONATE SHEET31. PVC/PLASTICS (SOFT/RIGID) FILMS/

SHEET32. POLYSTER FILM33. P.V.C. FLEXIBLE PIPES34. PVC NON-WOVEN MAT35. P.V.C. CONDUIT PIPES36. POLYESTER ZIP FASTENERS37. POLYPROPYLENE & MULTIFILAMENT

SPINNING YARN38. PLASTIC DOORS AND WINDOWS39. TEFLON - COATED - ELECTRIC CABLES40.uPVC DOORS & WINDOWS PROFILES41. X-RAY FILM

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant & Equipments andRaw Materials, Cost Economics with ProfitabilityAnalysis, BEP, Resources of Finance etc.

Ask for Price of this CD containing all above 41Project Reports. Payable fully in advance throughBank Draft/M.O. in favour of ENGINEERS INDIARESEARCH INSTITUTE, DELHI. Delivery within3 days. (To Order please dial : 098114-37895).

LEAD ACID BATTERYLead-Acid Battery comprises number of cellsin a container. These cells contain positive(PbO2) and negative (Pb) electrodes or platesseparators to keep the plate apart and sulphuricacid electrolyte. The electrochemical system ishighly reversible and sulphuric acid electrolyte.The electrochhemical system is highlyreversible and can be discharged and chargerepeatedly before failure of some sort causesthe chargocyde to be impractical. There arenumerous battery designs. The most widelyused secondary battery is the lead acid type.This battery is available in many sizes andcapacities, and the weight can vary from 100gto several tons, There on three principalcategories. The material used for containersused depends on the appl ication e.g.polypropylene and vulcanized rubber forautomotive batteries, polystyrene for stationerybatteries, polycarbonate for a large single cell.

Cost EstimationPlant Capacity 200 Nos./DayLand & Building (1000 sq.mt.) Rs. 1.02 Cr.Plant & Machinery Rs. 93 LacsW.C. for 2 Months Rs. 5.47 Cr.Total Capital Investment Rs. 7.62 Cr.Rate of Return 49%Break Even Point 39%*********************************************************

CHANACHUR, BHUJIA,GANTHIA (AUTOMATIC PLANT)

Dal Moth, Chanachur & Bhujia are the importantnames enhancing the flavour & taste asprocessed foods. These are food productshaving no historical background & becomes inmarket and in social & cultural synonym as thesociety became more advanced. Initially in long-long ago, people did not heard the name of Dalmoth, chur or Bhujia like food products. But nowa days it is well known not in India but worldwide. These are mainly consumed duringbreakfast period & are very much during social& cultural periods. These are used as tasty &flavored food as well as in medicinal way,however, a little it may be, according toayurveda) because of their carminativestimulative digestive properties. India producesalmost all these types of salty processed foodproducts of grains all these types of saltyprocessed food products of grains like Grams,Pulses etc.

Cost EstimationPlant Capacity 1 Ton./DayLand & Building (600 sq.mt.) Rs. 82 LacsPlant & Machinery Rs. 43 LacsW.C. for 2 Months Rs. 44 LacsTotal Capital Investment Rs. 1.79 Cr.Rate of Return 51%Break Even Point 42%*********************************************************

MANGANESE OREJIGGING PLANT

Manganese is one of the most importantstrategic minerals, being the one which thegreatest tonnages are required, and also theone in which the United States has had a limited

production, Manganese is an absolutenecessity in the steel industry, as this industryuses about 14 pounds of manganese in everyton of steel produced. Annual statistics showthat over 90 percent of the annual amount ofmanganese consumed in the United Statesgoes into the production of steel. From this itcan therefore be seen that the stability andaccessibility of a steady supply of manganeseore is a controlling factor in the maintenanceof the steel industry. The remaining 10 percentof the manganese consumed yearly in theUnited States is used in the manufacture of drybatteries, chemicals, glass, tile and brick. Oneof the outstanding characteristics of theutilization of manganese in steel making is thatin the process of being used, most of the metalis dissipated into the slag in a form not readilysusceptible to subsequent recovery as asecondary metal. In fact, the amounts that arereturned to use in this way are so small as tobe practical ly negligible and the ful lrequirements for each year must be net fromnew mine production.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (20,000 sq.mt.) Rs. 1.04 Cr.Plant & Machinery Rs. 1.46 Cr.W.C. for 2 Months Rs. 1.88 Cr.Total Capital Investment Rs. 4.46 Cr.Rate of Return 28%Break Even Point 59%**********************************************************

SODA ASH PLANT(FROM SOLUTION BRINE)

Sodium carbonate is a common inorganicindustrial chemical, also known as soda ash(Na2CO3). It is widely used in the manufactureof glass, chemicals, such as sodium silicatesand sodium phosphates, the pulp and paperindustries, the manufacture of detergents andfor the treatment of water. Soda ashmanufacture by Solvay technology is a verycomplex process. The natural sodium chloridesolution (brine) is extracted and purified(removal of solid impurities by filtration andremoval of calcium and magnesium ions byprecipitation). The discovery of the chemistryof the ammonia-soda process can be tracedback to the early 1800s. A few British andFrench plants operated in 1840-1860, butwithout success. The ammonia-soda processis usually called the Solvay process becausein 1865 Ernest Solvay started the first reallysuccessful plant at couillet in Belgium. In 1874,the first successful ammonia-soda plant waserected in England. The ammonia-sodaprocess is the dominant technology usedthroughout the world, hence this process isselected for production of soda ash.

Cost EstimationPlant Capacity 1666.67 MT./DayLand & Building (60 Acres) US$ 1.67 Cr.Plant & Machinery US$ 57.63 LacsW.C. for 1 Months US$ 8.58 Cr.Total Capital Investment US$ 10.95 Cr.Rate of Return 48%Break Even Point 32%*******************************************************


Start Your Own Industry

Patrons, deposit amount in EIRI Account

STATE BANK OF INDIA CA-30408535340(RTGS/NEFT/IFSC Code: SBIN0001273)

STATEMENT ABOUT OWNERSHIP ANDOTHER PARTICULARS ABOUT THE

JOURNALHI-TECH PROJECTSFrom IV (See Rule 8)

Place of Publication DelhiPeriodicity of Publication: MonthlyPrinter’s Name : Sudhir Kumar GuptaWhether Citizen of India : YesAddress : 4449 Nai Sarak,

Delhi- 6Publisher’s Name : Sudhir Kumar GuptaWhether Citizen of India : YesAddress : 4/35, Roop Nagar,

Delhi- 7Editor’s Name : Sudhir Kumar GuptaWhether Citizen of India : YesAddress : 4/35, Roop Nagar,

Delhi- 7Name & Address : Engineers India

Research Institute,4449, NaiSarak,Delhi - 6

Statement of individuals who own the newspaperand partners of shareholders more than onepercent of the total capital. I, Sudhir Kumar Guptahereby declare that the particulars given aboveare true to the best of my belief.Dated Sudhir Kumar Gupta

Signature ofPublisher

TECHNICAL TEXTILESTechnical textiles are textile material andproducts manufactured primarily for theirperformance and functional properties ratherthen aesthetic or decorative purpose. Aestheticproperties are not much important for theTechnical Textiles. The performance andfunctional properties are in sense with the agrito aerospace application. Based on the enduses, fibre selection to the method ofprocessing are the keys to new productdevelopment in the textile arena. Over allgrowth rates of Technical Textiles in the worldare about 4.0%per annum but the apparel andhome textiles are at the rate of 1.0%. Technicaltextiles application cycle is shown in the figure1, it gives a vivid picture on the divisions of thetechnical textiles, which is a self-explanatory.

Cost Estimation(All Fig. in Thousand Rupees)

Land & Building (50,000 sq.mt.) Rs. 5.49 LacsPlant & Machinery Rs. 12.92 LacsW.C. for 1 Months Rs. 2.85 LacsTotal Capital Investment Rs. 21.44 LacsRate of Return 15%Break Even Point 68%********************************************************

M.S. BILLET CASTING FROMSCRAP AND SPONGE IRON

USING INDUCTION FURNACEThe Induction furnace based on mini steel plantis a versatile installations where provisions areavailable for producing a range of steelproducts by Alloying and casting into variousshape. The products of steel plants are in theform of Ingots, Billets, Sheets etc. TheseInduction furnace based steel casting units aresuitable for small scale industries and mediumscale industries and yet have the capability to

complete in the internal as well as internationalmarket at all counts. In mini Billets are the basicproducts of steel from which different types ofsteel products are made such as sheets,Angles, Channels, Rods, etc. Mild steel Billetsare the basic raw material for manufacturingvarious types of re-rolled products. Mild steelbillets are used for mechanical engineeringworks such as manufacturing machines andtheir parts. Steel billets are used for productionof plate, sheets, strips, rod etc. by hot Rollingand cold Rolling process. It is the commercialforms of steels mill products which are directlyused in the Engineering Industries. However,is the steel billets is the first form of steel forproducing other shapes by rolling, forging orextrusion process. The Industries of this typein SSI or medium scale have a wide spreadimmediate and future uses and applicationswhich can at certain occasions reduce to someextent but can not be eliminated come whatmay plastics are certainly trying every best toreplaced steel strips/sheets and of course, havesucceeded in certain Areas to be considered asubstitute but it has always been from just afew counted angles. If it is looked upon in everydetails it will be found that steels have substitutein wider senses so far.

Cost EstimationPlant Capacity 50 MT./DayLand & Building (1500 sq.mt.) US$ 3.82 LacsPlant & Machinery US$ 1.18 LacsW.C. for 3 Months US$ 20.56 LacsTotal Capital Investment US$ 25.92 LacsRate of Return 27%Break Even Point 46%**********************************************************

RUBBER PLANTATIONRubber is traditionally grown in India in thehinterlands of the South West Coast comprisingof the state of Kerala and adjoiningKanyakumari District of Tamilnadu. This tractis, however, now reaching a level of saturationfor rubber cultivation and the scope of furtherexpansion of the crop is very much limited.Considering this fact, the expansion of rubbercultivation, which is of prime importance forsetting up rubber production, has to take placemainly in non-traditional areas. Non-traditionalareas so far identified as almost ful ly ormarginally suitable for rubber cultivation areArunachal Pradesh, Assam, Manipur, lowerreaches of hills of Meghalaya, Mizoram,Nagaland and Tripura excluding the other stateof India. Although the North Eastern Regionlies far outside the traditional rubber growingzone, the agro-climatic conditions obtainedhere are unique in as much as near tropicalfeatures are experienced in most parts owingto low elevations, exposure to monsoons andother moderating influences. Public SectorCorporations set up later joined rubber plantingendeavours on extensive scales. Thus while inAssam and Tripura, Public Sector Corporationsare leading in the rubber plantation sector, inMeghalaya, Manipur, Mizoram and ArunachalPradesh the role has played by the State Forestand Soil Conservation Departments. Individualgrowers are also contributing to fast growth ofrubber cultivation in this region.

Cost EstimationLand & Building (1000 Acres) Rs. 31.22 Cr.Plant & Machinery Rs. 12 LacsW.C. for 3 Months Rs. 30 LacsTotal Capital Investment Rs. 31.71 Cr.Rate of Return 7%Break Even Point 70%********************************************************

CP BATH FITTINGSThis project proposes to manufacture chromeplated sanitary fittings eg., Bib cocks, Pillarcocks, stop cocks, Bottle trap, Basin waste,Basin mixer, Angular stop cock, showers,Introducer, and ceramic Disc with Quarter-turnfittings in single lever, etc. These are productsof ordinary to sophisticated types. The Govt. ofIndia has reserved this project for SSI Units inorder to protect entrepreneurs from competitionwith large scale manufacturers. All the plantand machinery required for the project areindigenously available. These products areused as fittings in any Sanitary system. Thereis a large demand of chrome-plated bathroomfittings in all modern houses, offices, Hotels,Railway Stations, Aerodromes & so on all overIndia.

Cost EstimationPlant Capacity 1667 Nos./DayLand & Building (1012 sq.mt.) Rs. 1.02 Cr.Plant & Machinery Rs. 28 LacsTotal Capital Investment Rs. 1.92 Cr.Rate of Return 45%Break Even Point 48%**********************************************************

STEEL TRANSMISSION LINETOWER AND ROLLING MILL TOPRODUCE STEEL SECTIONS

The transmission line towers are comparativelyl ight structures and the maximum windpressure is the main criterion for their design.The concurrence of earth quake & intensifiedwind pressures may also be considered in theearth quake - prone areas for design of theoverhead transmission line towers. Thesetowers are fabricated by means of bolted jointsonly. The structural steels of well specifiedqual ity only are used in construction oftransmission l ine towers to ensure thepermissible stresses and other design details.Practices followed in material selection, design,fabrication, testing and must suit the fieldconditions of this country. Various designconsiderations are adopted in the design ofself-supporting steel lattice towers for overheadtransmission lines, including loads,combination of loads, permissible stresses,wind pressures likely to be experienced duringservice and atmospheric corrosion intensity.

Cost Estimation (All Fig. in Lacs Rupees)Plant Capacity 500 MT./DayLand & Building (5 Acres) Rs. 434 LacsPlant & Machinery Rs. 1,098 LacsW.C. for 2 Months Rs. 11,183 LacsTotal Capital Investment Rs. 12,939 LacsRate of Return 79%Break Even Point 21%*********************************************************

Top Industries to Start


Patrons, deposit amount in EIRI Account

ICICI BANK LTD.CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

FERRO SILICON(FROM MINERAL INGREDIENTS)Ferro alloys are used in making alloy steelsand castings of different special types asaddition agents. Ferro alloys are usually madein electric-are furnaces. Alloy steel have oftengreater l imitations on tramp elementconcentrations than plain carbon steels.Municipal ferrows scraps is largely used as partof the furnace charge to produce ferro alloys.Incinerated scrap is preferred because all ofthe consuminats are eleminiated though thissource leaves a significant proportion of tin &copper impurities, yes due to the fact that ferroalloy is typically only a small addition to thefinal steel, the dilution of impurities, containedin the ferro alloy, results in acceptableconcentrations. In steel making, variouselements are added to the molten metal toeffect various properties, eg. deoxidasion graincontroly improvement of mechanical/thermal/corrosion properties etc. Chemicals added intosteels in the bath consists of iron and theelements intended to be incorporated, hencecalled ferroalloys. These ferro alloys areproduced in electric & many other types offurnaces. A number of ferro alloys producedtoday contain very little of iron. Ferro alloys are,thus, a special class of addition agents.

Cost EstimationPlant Capacity 200 MT./DayLand & Building (1,00,000 sq.mt.) Rs. 1.99 Cr.Plant & Machinery Rs. 6.62 Cr.W.C. for 2 Months Rs. 68.71 Cr.Total Capital Investment Rs. 78.21 Cr.Rate of Return 71%Break Even Point 70%*********************************************************

CATIONIC SOFTENER(STEARIC ACID BASED)

Softening agents are surface active agents witha long hydrophobic chain and a shorterhydrophilic water-solubilizing group. The formerdetermines the softening character andgenerally differs in properties from those ofdetergents. The type of ionic charge on asoftening agent exerts a great influence on itsorientation on textile material. Softening oftextile materials was probably carried out inprehistoric times and has continued till today.Most of the Softening agents are derived fromstraight chain fatty radicals containing 12 to 18carbon atoms. In textile finishing articles, thepast decade can be considered “the age of theacrylics” and the era of the multipurpose finish.Numerous polymers farmed from acrylicmonomers have been specially ‘Tailored’ tomeet the finisher exacting requirements.Multipurpose finished have been big property-wise & economy wise.

Cost EstimationPlant Capacity 5 Tons/DayLand & Building (5000 sq.mt.) Rs. 5.19 Cr.Plant & Machinery Rs. 82 LacsW.C. for 3 Months Rs. 2.97 Cr.Total Capital Investment Rs. 9.50 Cr.Rate of Return 46%Break Even Point 37%********************************************************

PEPPERMINT CULTIVATION& PROCESSING

Consists of menthol (not less than 50%) extensof menthol pinene, l imonene, cineole,menthone etc. It is derived by distilling theleaves and flavoring tops of the peppermintplant. The commercial cultivation of the plantsknown as peppermint and spearmint,members of the genus Mentha and theextraction, processing and shipment of theiroils, includind menthol crystals, constitute anindustry involving over $100 mill ion intransaction each year. The mint plsnts areperennials yeilding aromatic oils which areincreasingly importance and have indeed longbeen amongst the world’s most valuableflavouring materials. Mint is probably theworld’s third most important flavour, beingexceeded in popularity only by vanilla andcitrus flavours. The oils obtained by therelatively simple process of steam distillation,belong to a chemical class of plant productsvariably referred to as essential, volatile orethereal oils, whose chemical compositionconsists almost entirely of hydrocarbon andoxygenated compounds known as terpenoids.

Cost EstimationCapacity Peppermint oil 37,500 kg/Annum Culivated Herb 1500 Ton/Annum Menthol crystals 30,000 Kgs/Annum De Mentholized Oil 27,000 Kgs/AnnumOil extracted Herb used as cattle feed 2700 MT/AnnumLand & Building (150 Acres) Rs. 20.40 Cr.Plant & Machinery Rs. 2.31 Cr.Total Capital Investment Rs. 23.45 Cr.Rate of Return 18%*****************************************************

SILICON FROM RICE HUSKRice husk is a by product of agriculture a by-product while is almost treated like waste andnot seriously bothered about Consider, India’scase every year about 60 million tonnes ofpaddy grown in the country produces upto 12million tons of rice husk in over 900,000 ricemills spread around the country. Though, mostof it is used as either a heating medium or asan animal feed. The strange fact is that 12million tons of rice husk can have a heat valueequivalent to around 20 million barrels of oil.To be more precise 3 kgs. of rice husk areequivalent to one litre of oil or 1.5 kilos of coalin heat content. Rice husk basically consistsof a mixture of moisture Carbon, Volatiles, Ashand silica in ash. Its net heating value isbetween 3010 and 3340 kilo calories per Kgmore over rice husk has low in cinerationproperties because of its sil ica content,modular shape and its light weight. In general,furnace rice husk produces heat of 65%efficiency and in special type vertical furnaceit will produce heat of 95% efficiency.

Cost EstimationPlant Capacity 5 Tons/DayLand & Building (3000 sq.mt.) OWNEDPlant & Machinery Rs. 60 LacsTotal Capital Investment Rs. 2.55 Cr.Rate of Return 63%Break Even Point 34%

RECLAMATION OF USEDENGINE OIL (BY CLAY AND

VACUUM DISTILLATIONPROCESS)

Now-a-days engine oi l has become animportant factor for automobile and otherpurposes and since the prices of all petroleumproducts have gone up. It has becomeextremely necessary to refine used engine oilwhich could be reused as original. Keeping thisview Defence Research (Materials), Kanpurhas developed a very simple process whichenvisages uti l ization of sulphuric acid,activated clay and filter aid as the raw materialsand the suggested reclaimed economical unitfor this industry is 200 tons per annum. Engineoil becomes contaminated with foreign materialin service. In circulating systems, where asubstantial quantity of oil is involved, it isdesirable to maintain it as clean as possible toprovide maximum working efficiency and tokeep wear and damage of lubricated parts toa minimum.

Cost EstimationPlant Capacity 4 KLS/DayLand & Building (2000 sq.mt.) Rs. 1.56 Cr.Plant & Machinery Rs. 46 LacsTotal Capital Investment Rs. 2.72 Cr.Rate of Return 24%Break Even Point 59%***********************************************************

HDPE PIPES(1 INCH TO 24 INCH OD)

Provision of drinking water supply, or in otherwords ‘piped’ water supply to urban and ruralpopulation, constitutes an important aspect ofdevelopmental programmes in many countries.Among several materials for pipes and fittings,plastics, though of recent origin, have offeredvast potentialities both economical andtechnical, for exploitation by the engineers,architects and builders of the plastic materials,polyethylene (low and high density) andunplastic. These HDPE pipes and fittings havea high degree of corrosion a high degree ofcorrosion resitance, are light in weight. Yettough and durable, have excellent, hydraulicproperties, excellent thermal properties,weatherability. As such law & high density pipesare various fields viz. agriculture industry. Withtheir many advantages over conventionalmaterials, plastics have revolutionized modernengineering, unlike steel and copper, plasticmaterials do not corrode, are much lighter andcost less.

Cost EstimationPlant Capacity 10 MT./DayLand & Building (2 Acres) Rs. 5.15 Cr.Plant & Machinery Rs. 4.21 Cr.W.C. for 2 Months Rs. 4.45 Cr.Total Capital Investment Rs. 14.15 Cr.Rate of Return 37%Break Even Point 47%*******************************************************


Best Industries to Start and Grow Hi-Tech Projects(Date of Posting 24th to 30th of Every Month,

Weight of Magazine- Upto 48 Gram)

An Industrial Monthly Magazine onHi-Tech Projects & developed

and underdevelopingTechnologies with lucrative

Project opportunitiesEditor

Sudhir GuptaAsst. EditorAnkur Gupta

SUBSCRIPTION RATESFOR INDIA

Single Copy Rs. 20/-One Year Rs. 225/-

Three Years Rs. 650/-(Add Rs. 100/- for outstation cheques.

Please make the Draft/Cheque infavour of “Engineers India Research

Institute, Delhi”

FOR OVERSEASSingle Copy US$ 10/-One Year US$ 120/-

CAUTIONProject Reports/Profiles provided in

this issue had been prepared ondatas available at the time of

preparing these reports.Entrepreneurs/Industrialists are

requested to please update the databefore venturing into any project

mentioned herein.

PUBLISHERS

4449 Nai Sarak, Main Road, Delhi - 110006(INDIA) Ph : 9111- 43658117, 23918117,

45120361, 9811437895, 9811151047E-Mail :

[email protected],[email protected]: www.eiriindia.org

www.eiribooksandprojectreports.com

Patrons may also directly transfer thefund for Project Reports & Books in

following EIRI current accounts:HDFC BANK - 05532020001279(RTGS/NEFT/IFSC CODE: HDFC0001981)

ICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE: ICIC0000387)

AXIS Bank Ltd. - 054010200006248(RTGS/NEFT/IFSC CODE:UTIB0000054)

UNION BAK OF INDIA -307201010015149(RTGS/NEFT/IFSC CODE: UBIN0530727)

STATE BANK OF INDIA -30408535340(RTGS/NEFT/IFSC CODE: SBIN0001273)

AND SMS US ON PH. +91 9811437895

N-ACETYL THIOZOLIDINE-4-CARBOXYLIE ACID (NATCA)

N-Acetyl Thiozol idine-4-Carboxylic Acid(NATCA) is a versatile chemical, used inagriculture as a plant growth substance usedas a fruit setter, bio stimulant germinationenhancer. The use of plant growth substancemay be caused of the most importantquantitative yield yet achieved in agriculture.The principal aim of the agro chemical industryhas been to provide chemicals that controls thecompetition to the crop. Plant growth substanceon regulators are used to modify the crop bychanging the rate or pattern or both, of itsresponse to the internal and external factor, thatgovern all stages of crop development fromgermination through vegetable growth,reproductive development maturi ty andsenescance or aging as well as postharvestpreservation.

Cost EstimationPlant Capacity 700 KGS/DayLand & Building (3000 sq.mt.) Rs. 3.37 Cr.Plant & Machinery Rs. 36 LacsW.C. for 2 Months Rs. 38 LacsTotal Capital Investment Rs. 4.38 Cr.Rate of Return 24%Break Even Point 52%*****************************************************

PRODUCTION OF ALL TYPESOF FANS SUCH AS AXIAL

FANS, CENTRIFUGAL FANS(SMOKE EXTRACT FANS &FRESH AIR SUPPLY FANS),

BATH ROOM FANS ETC.Fans and blowers provide air for ventilation andindustrial process requirements. Fans generatea pressure to move air (or gases) against aresistance caused by ducts, dampers, or othercomponents in a fan system. The fan rotorreceives energy from a rotating shaft andtransmits it to the air. Difference between Fans,Blowers and Compressors Fans, blowers andcompressors are differentiated by the methodused to move the air, and by the systempressure they must operate against.

Cost EstimationPlant Capacity 40 Nos./DayLand & Building US$ 20 LacsPlant & Machinery US$ 4.65 LacsTotal Capital Investment US$ 34.59 Cr.Rate of Return 85%Break Even Point 35%**********************************************************

READY MADE GARMENTS (T-SHIRT/POLO GOLFER/WOVEN

SHIRTING & SUITING FORUNIFORMS) AND SWEATERS

MANUFACTURINGReadymade garment industry has occupied aunique place in the industrial scenario of ourcountry by generating substantial exportearnings and creating lot of employment. Itscontribution to industrial production,employment and export earnings is verysignificant. This industry provides one of the

basic necessities of life. The employmentprovided by it is a source of livelihood formillions of people. It also provides maximumemployment with minimum capital investment.Since this industry is highly labour-intensive, itis ideally suited to Indian condition. Readymadegarments manufactured in India are wellreceived across the overseas market and Indiahas emerged as a preferred sourcingdestination. India’s including Readymadegarments.

Cost EstimationPlant Capacity 4830 Nos./DayLand & Building (8000 sq.mt.) US$ 10.01 LacsPlant & Machinery US$ 12.57 LacsW.C. for 2 Months US$ 12.82 LacsTotal Capital Investment US$ 37.11 LacsRate of Return 70%Break Even Point 34%********************************************************

PE BASED CARBONBLACK COMPOUNDS

Carbon Black is an important constituent inpolyethylene compounds used in themanufacture of pressure pipes for thedistribution of potable water and gas. The useof specialty P-Type carbon blacks provides forthe most cost effective means of achieving thenecessary level of UV stabilization withoutcompromising the ultimate performancerequirements of these pressure pipes. The StarDiagram is a visual and useful means ofcomparing differing types of carbon black fortheir relative suitability for use in pressure pipeapplications.

Cost EstimationPlant Capacity 10 MT./DayLand & Building (5000 sq.mt.) US$ 13.20 LacsPlant & Machinery US$ 1.72 LacsW.C. for 2 Months US$ 7.84 LacsTotal Capital Investment US$ 23.66 LacsRate of Return 57%Break Even Point 34%*******************************************************

ACTIVATED CARBONFROM RICE HUSK

The term Activated carbon, active carbon, oractive charcoal is usual ly applied toamorphous carbons possessing higherabsorption capacities than wood or animalcharcoal. Many processes were developedduring world war for the production of effectiveabsorbents for use in gas masks. Industrialactivated carbons in the form of pellets,granules or fine powders, and with manyindustrial applications, are now available inthe market under different trade names.Commercial absorbent carbons may begrouped into decolorizing, gas absorbent,metal absorbent, and medicinal carbonsaccording to their physical structure,properties, and applications.

Cost EstimationPlant Capacity 2 Ton./DayLand & Building (2000 sq.mt.) Rs. 1.78 Cr.Plant & Machinery Rs. 41 LacsTotal Capital Investment Rs. 2.95 Cr.Rate of Return 28%Break Even Point 52%******************************************************

Hi-Tech Projects,Jan’18, www.eiriindia.org #09

Start Your Own Industry ONION DEHYDRATION

Dehydrated vegetables are beingincreasingly used as they retain theirculinary quality and palatability and bringabout economy in storage space andtransport cost. Besides, there is optimumutilization of the product during the glutseason, and saving of packaging materialand tinplate. Dehydrated onion is usedextensively in overseas countries as acondiment. Efforts are also being madefor export of dehydrated onions, which isbeing produced by several manufacturers.This standard is intended to help in thequal i ty control of dehydrated Onion.Dehydrated Onions have been producedin small quantities since the nineteenthcentury is dehydrated onions were suppliedto British naval expeditions in the mid-nineteenth century and dehydrated onionshave been produced in sizable quantitiesduring subsequent wars, primari ly forconsumption by armed forces, but alsofor civilian use.

Cost EstimationPlant Capacity 5 Ton./DayLand & Building (3000 sq.mt.) Rs. 3.67 Cr.Plant & Machinery Rs. 1.11 Cr.W.C. for 2 Months Rs. 3.09 Cr.Total Capital Investment Rs. 8.42 Cr.Rate of Return 33%Break Even Point 47%*******************************************************

STONE MININGThe quarry is the type of open pit mine, therock or minerals are extracted from the quarry.For extracting building materials such asdimension stone, construction aggregate,riprap, sand and gravel; quarries are generallyused. For the requirements for large amountsof aggregate in those materials, they arecollocated with concrete and asphalt. Theprocess of splitting the stones into usableshapes and different sizes for the process ofbuilding is known as stone quarrying. Stonesfrom quarries have been used in all types ofstone creations, and they are used in theprocess of constructions ranging from federaloffices to farm foundations. In United States,stones quarries are classified into four majorcategories, they are boulder quarries, surfaceledge quarries, commercial deep pit quarries,and subterranean quarries.

Cost EstimationPlant Capacity 2400 Tons/DayLand & Building LEASEPlant & Machinery Rs. 5.10 Cr.Total Capital Investment Rs. 8.02 Cr.Rate of Return 81%Break Even Point 35%*********************************************************

H.T. & L.T. INSULATOR, HT AIRBRAKE SWITCHES D.O. FUSE,

LIGHTNING ARRESTERSMaterials having few free electrons poorconductors In fact, materials that have hardlyany free electrons can be used to insulateelectricity and are called insulators, as glass,

mica, porcelain, rubber & paper. The functionof an insulator is to insulate the line conductorfrom each other and from the pole or tower.Three colours of insulator are used in overhead lines, namely. The pin insulator gets itsname from the fact that it is supported on apin. The pin holds the insulator, and theinsulator has the conductor tied on it. Pininsulators are made of either glass or porcelain.The glass insulator is always one solid pieceof glass, that is it is one piece insulator. Theporcelain insulator is also a one piece insulatorwhen used on low voltage lines but consists oftwo, three or four layers, cemented togetherto form a rigid until when used on highervoltage line. It is usually one piece for voltagebelow 23,000 volts. The use of several layersfor high voltage line helps to spill the rain andprovide a long, dry arc-over path. Pin insulatorare seldom used on transmission lines havingvoltage above 4400 volts, although some88000 volts, lines using pin insulators are inoperation today.

Cost EstimationCapacity 2 Ton/Day (HT/LT Insulator)500 Nos/Day (HT Air Brake Switch & DO Fuse) 100 Nos/Day (Lightening Arrestor)Land & Building (6000 sq.mt.) Rs. 7.60 Cr.Plant & Machinery Rs. 1.12 Cr.W.C. for 3 Months Rs. 1.45 Cr.Total Capital Investment Rs. 10.32 Cr.Rate of Return 30%Break Even Point 44%**********************************************************

BIO -DIESEL EXTRACTIONFROM JATROPHA, SOYABEAN,

SUNFLOWER, RICE BRAN,ALGE & CULTIVATION OF

JATROPHAThe depleting sources of fossil fuel, everincreasing crude oil prices, increasing energydemand and global environmental concern aredriving the world to look for alternative fuel. Bio-fuels, renewable liquid fuel extracted frombiological raw material, have proved to be agood substitute for oil. Bio-diesel is forming apromising sustainable source of energy and isgaining world wide acceptance as a solutionto problems of environmental degradation,energy insecurity and restrictive price structure.Therefore the production of Bio-diesel isbecoming an increasingly important elementin global energy policies.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (12,300 sq.mt.) Rs. 3.18 Cr.Plant & Machinery Rs. 4.55 Cr.W.C. for 2 Months Rs. 7.98 Cr.Total Capital Investment Rs. 15.88 Cr.Rate of Return 74%Break Even Point 25%********************************************************

PVC PIPES AND FITTINGPVC pipe which is made from polymerizedvinyl chloride, a synthetic resin, which whenplasticized or softened with other chemicalshas some rubber-like properties. Derived fromacetylene and anhydrous hydrochloric acid.

PVC pipe has nominal sizes that are to beused with PVC socket fittings (schedule40) and PVC socket or threaded fittings(schedule 80). PVC Pipe and Fittings havegot tremendous demand in India as well asin abroad. To manufacture this, al l themachinery and raw materials are availableindigenously. A polyvinyl chloride (PVC)pipe is made from a plastic and vinylcombination material. The pipes are durable,hard to damage, and long lasting. A PVC pipedoes not rust, rot, or wear over time. For thatreason, PVC piping is most commonly used inwater systems, underground wiring, and sewerlines.

Cost EstimationPlant Capacity 10 MT./DayLand & Building (10,000 sq.mt.) Rs. 14.17 Cr.Plant & Machinery Rs. 1.77 Cr.W.C. for 2 Months Rs. 4.56 Cr.Total Capital Investment Rs. 20.95 Cr.Rate of Return 13%Break Even Point 64%*********************************************************

PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKING

WATER, EDIBLE OILS,ALCOHOLIC BEVERAGES

(COUNTRY LIQUOR & IMFL) ETC.While PET bottle development was proceedingin the US, a large manufacturer of injectionmoulding machines in Japan, was leading aproject to develop a machine to make biaxiallyoriented PP (polypropylene) containers. Theyrecognized that the prototype machine couldbe used to produce the new PET bottles and,in December 1975, the One-stage ASB-150injection stretch blow moulding machine formaking the new biaxial oriented PET bottleswas unveiled. All one-stage injection stretchblow moulding machines derived from thisoriginal Stretch Blow design are referred toas classic one-stage machines, as the concepthas long since been extended into other PETdevelopments.

Cost EstimationPlant Capacity 30000 Nos./DayLand & Building (4000 sq.mt.) Rs. 5.35 Cr.Plant & Machinery Rs. 1.80 Cr.W.C. for 3 Months Rs. 3.81 Cr.Total Capital Investment Rs. 11.21 Cr.Rate of Return 22%Break Even Point 54%*********************************************************

HDPE PIPES & PIPE FITTINGSProvision of drinking water supply, or in otherwords ‘piped’ water supply to urban and ruralpopulation, constitutes an important aspectof developmental programmes in manycountries. A whole range of sanitary fittings andfixtures viz, taps, showers, gratings, basin andsink wastes, waste traps, float balls and valves,syphons for flushing cystems, are alsocurrently available in the market.

Cost EstimationPlant Capacity 15 MT./DayLand & Building (2 Acre) Rs. 5.15 Cr.


Best Industries to Start and GrowPlant & Machinery Rs. 4.66 Cr.Total Capital Investment Rs. 16.74 Cr.Rate of Return 60%Break Even Point 35%********************************************************

FAST FOOD RESTAURANT CHAINWITH CENTRALLISED KITCHEN

This document is developed to provide theentrepreneur with potential investmentopportunity in setting up and operating amedium sized fast food restaurant offering avariety of food items to the general public. Thispre-feasibility gives an insight into variousaspects of planning, setting up and operatinga fast food restaurant for the general populace.The document is designed to provide relevantdetails (including technical) to facilitate theentrepreneur in making the decision byproviding various technological as well asbusiness alternatives. The document alsoallows flexibility to change various projectparameters to suit the needs of theentrepreneur. Fast food is food which isprepared and served quickly at outlets calledfast-food restaurants. It is a multi-billion dollarindustry which continues to grow rapidly inmany countries.

Cost EstimationLand & Building RENTEDPlant & Machinery Rs. 1.25 Cr.W.C. for 1 Months Rs. 21 LacsTotal Capital Investment Rs. 1.49 Cr.Rate of Return 33%Break Even Point 68%*********************************************************

GLASS REINFORCEDGYPSUM MOULDING

The usual construction methods are now givingway to more specialized and efficient materialsand techniques for construction. Constantinnovation has helped the sector to come outwith new techniques that help in quick and easyreal ization of projects. Prefabricatedconstruction is not new , but it has suddenlygained importance seeing the demand forhousing and infrastructure rising. With theconventional methods of construction usingbrick and mortar time consuming and notefficient, prefab construction proves to be abetter and efficient alternative. Prefabricatedstructures are useful for sites where normalconstruction is not suitable like hilly regions,flyover sites, and even commercial buildings.

Cost EstimationPlant Capacity 15 MT./DayLand & Building (20000 sq.mt.) US$ 45.52 LacsPlant & Machinery US$ 66.46 LacsW.C. for 3 Months US$ 10.40 LacsTotal Capital Investment US$ 1.23 Cr.Rate of Return 31%Break Even Point 50%*******************************************************

QUARTZ BASED INDUSTRIES(QUARTZ POWDER, SILICA

SAND, SILICA RAMMING MASS& FUSED SILICA)

Silica. The most common occurrence of silica(qv) is in the form of quartz. Other forms which

are found in nature are tridymite, cristobalite,vitreous silica, cryptocrystalline forms (usuallyas pebbles in chalk), hydrated silica, anddiatomite. The principal sources of silicaused in the ceramic industry are thesandstones, quartzites, and sands.Quartzites, often called ganister, are firmlyconsolidated sandstones, whereassandstones are rather lightly bonded quartzgrains or sands. Sil ica is the primaryingredient in glass and is usually obtained fromhigh purity sandstones or quartzites bycrushing and grinding, or from high-grade sanddeposits. The term glass sand may refer to adeposit of sand or, more commonly it is usedto refer to the sand after i t has beenbeneficiated from sandstones, quartzites, ornatural sands.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (8000 sq.mt.) Rs. 4.44 Cr.Plant & Machinery Rs. 2.25 Cr.W.C. for 3 Months Rs. 1.61 Cr.Total Capital Investment Rs. 8.64 Cr.Rate of Return 26%Break Even Point 59%*******************************************************

ANHYDROUS SODIUMDITHIONITE PRODUCTION

Sodium Hydrosulfite, also known as SodiumDithionite had been developed at the beginningof the 20th century and was first applied fortextile printing. Due to structural change in thetexti le industry, the importance of theapplication for the bleaching of wood pulp inthe paper industry increased continuously.Sodium Hydrosulfite is a white powder.Commercial sodium hydrosulfite contains 85%- 90% sodium dithionite w/w. It is readily solublein water and shows powerful reducing actionin aqueous solutions. Sodium hydrosulfite isused as a reducing agent in dying application.It undergoes reduction reaction with water-insoluble vat dye and sulfur dye to form water-soluble alkali metal salt of the dye so that theyhave affinity for the textile fiber.

Cost EstimationPlant Capacity 20 MT./DayLand & Building (Area 1.5 Acres)US$ 6.02 LacsPlant & Machinery US$ 28 Th.W.C. for 2 Months US$ 7.22 LacsTotal Capital Investment US$ 14.34 LacsRate of Return 48%Break Even Point 49%********************************************************

MAHINDRA CAR DEALERSHIPWITH AUTOMOBILE SERVICE

STATION/GARAGEA Car dealership is a business that sales newor used cars at the retail lavel based ondealership contact with Auto maker. It employsautomobiles sales people to sell theirautomobile vehicle. It may also providemaintenance service for car sand employsautomobiles technicians to stock and sellsspare automobile parts and process warrantyclaims. Mahindra & Mahindra (M&M) wasestablished in 1945 as Mahindra &Mohammed. Later on, after the partition of

India, one of the partners - GhulamMohammad - returned to Pakistan, where hebecame Finance Minister. As a result, thecompany was renamed to Mahindra &Mahindra in 1948. M&M started its operationas a manufacturer of general-purpose utilityvehicles. It assembled CKD jeeps in 1949. Overthe passing years, the company expanded itsbusiness and started manufacturing lightcommercial vehicles (LCVs) and agriculturaltractors. Apart from agricultural tractors andLCVs, Mahindra & Mahindra also showed itsdexterity in manufacturing army vehicles.

Cost EstimationPlant Capacity 3240 Cars/AnnumLand & Building (Area 4000 sq.mt.Rs. 2.63 Cr.Plant & Machinery Rs. 35 LacsW.C. for 1 Months Rs. 22.15 Cr.Total Capital Investment Rs. 25.60 Cr.Rate of Return 58%Break Even Point 31%*********************************************************

AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

Air filters and filtration equipment are ubiquitousequipment used in diverse industries and fields,given the universal need to maintain particulatecleanliness to ensure efficient functioning ofequipment/machinery and the growingpressure to improve urban and indoor airquality. From residential, commercial toindustrial sectors, these equipments are widelyused to fil ter and remove atmosphericparticulate matter. In clean air applications, thegrowing media clamor over deteriorating indoorair quality, increasing incidences of allergicrespiratory disorders and growing threat ofairborne infectious diseases., is triggeringincreased demand for air filtration and aircleaning devices.

Cost EstimationPlant Capacity 900 Nos./DayLand & Building (Area 2000 sq.mt.Rs. 1.66 Cr.Plant & Machinery Rs. 73 LacsTotal Capital Investment Rs. 3.83 Cr.Rate of Return 27%Break Even Point 67%**********************************************************

ABSORBENT COTTON &SURGICAL BANDAGES (EOU)

Absorbent Cotton also known as SurgicalCotton or Cotton Wool is mainly used formedical purposes in hospitals, nursing homes,dispensaries etc., Because of high fluidabsorbency power, it is better known asabsorbent cotton. The absorbent cotton shouldbe chemically inert and soft to give maximumprotection and should not cause irritation.These properties can be achieved bymanufacturing the product as per standardmethod of manufacture.

Cost EstimationPlant Capacity 3 MT./DayLand & Building (Area 5000 sq.mt.Rs. 5.19 Cr.Plant & Machinery Rs. 2.03 Cr.W.C. for 1 Months Rs. 66 LacsTotal Capital Investment Rs. 8.25 Cr.Rate of Return 32%Break Even Point 50%**********************************************************

To get Loan/Finance from Banks/Finacial Institutes.

To set up your own Industry/Unit

To have Detailed & Exhaustive Data on any Project.

A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com

EACH DETAILED PROJECT REPORT CONTAINS:INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining RequiredProperties Economy & Productivity Competence.

MARKET SURVEY : Market Position, Installed Capacity Production, Anticipated Demand, Present Manufacturers,Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently

PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing theProduct, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished Products

RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement ofRaw Materials [Imported/Indigenous]

PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants, Pricesod Machineries, Suppliers of Plant and Machineries.

LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs ofConstruction

PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment, WorkingCapital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads, Total Cost ofProject, Sources of Finance/Refinance, Break Even Point Determination.

* EIRI Project Reports are prepared by highly qualified & experienced consultants &Market Research and Analysis supported by a panel of Experts and Computerised.

* Data provided are reliable and uptodate collected from manufacturers/suppliers, plantalready commissioned in India.

EIRI Technocrats and Engineers have just prepared“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORTS”

on following lucrative products which are most viable and profitable and having bright future scope

For assessing Market Potential, Corporate Diversifications,Planning, Investment Decision Making and to start your own setup,Entrepreneurs and Industrialists are most welcome to contact EIRI.

* COPPER SULPHATE FROMCOPPER ASH/SCRAPCHELATED ZINC (ZN-EDTA)12%

* ORTHOPAEDIC IMPLANTSAND INSTRUMENTSBARLEY MALT

* MINERAL TURPENTINE OIL(M.T.O.) FROM PETROLEM(SUPERIOR KEROSENE OILOR OTHER MATERIAL)

* M.S.FASTENERS AND S.S.FASTENERS

* P.V.C. COMPOUNDING(FRESH) FOR CABLES ANDPVC PIPES

* BANANA FIBRE EXTRACTIONAND HAND MADE PAPERBANANA & ITS BY

PRODUCTS* COLOUR AND ADDITIVES

MASTERBATCHES* METALLIC STEARATE* SURGICAL METHYLATED

SPIRIT* KHADSARI SUGAR (500 TCD)* COTTON (RUI) FROM WASTE

COTTON CLOTH* LAUNDRY & DRY CLEANERS* COATED YARN* TOUGHENED GLASS* CAUSTIC SODA (SODIUM

HYDROXIDE) (NaoH)ELECTROLYTIC PROCESS

* PLASTIC WASTE RECYCLINGUNIT & PYROLYSIS PLANTFROM PLASTIC AND RUBBERWASTE (INTEGRATED UNIT)

* CHITIN & CHITOSAN FROMPRAWN SHELL WASTE

* PASTA PRODUCTION PLANT(SHORT PASTA)

* SODIUM HYDRO SULFITETHROUGH FORMALDEHYDEROUTE CAP-20 TPD

* SODA ASH PLANT FROMSOLVAY PROCESS

* ONION, AND GARLICPOWDER WITH GRAPEDEHYDRATION (RAISINS)

* FLUSH DOORS* DI-METHYL PHTHALATES

(DMP)* GLUTEN FREE BEER

* PVC AND PP FILES ANDFOLDERS

* SULFAMIC ACID PURECRYSTAL AND OTHER GRADE(GP,SR & TM GRADE)

* DECORATIVE LAMINATEDSHEET (SUNMICA)

* ALPHA CELLULOSE POWDERFROM COTTON WASTE

* CAST POLY PROPYLENEFILMS ( CPP FILM)

* CASHEW NUT PROCESSING* BIOGAS PRODUCTION (1500

CUBIC METER PER DAY)* SOYA MILK AND PANEER* MINERAL TURPENTINE OIL

(MTO)

EIRI is an expertIndustrial Consultantworking over 35 years

and specialized toprepare all types ofDetailed Project

Reports based onclients requirements.Do Contact Today at:

[email protected]



* STEEL FABRICATION* STEEL ROLLING MILL

(REINFORCEMENT BAR)* ACRYLIC BATH TUB BY

ACRYLIC SHEET* FABRICATION OF HEAT

EXCHANGER* KITCHEN PRODUCTS

MADE OF STAINLESS STEEL* ALUMINIUM BEVERAGE CAN* STEEL ROLLING MILL (BY

INDUCTION FURNACE FROMSTEEL SCRAP & SPONGIRON

* M.S. BILLET CASTING WITHINDUCTION FURNACEFROM STEEL SCRAP &SPONGE IRON

* PROCESSING OF LOWGRADE TUNGESTEN OREFULL BODY & CHASSISSBUS PLANT

* ASSEMBLY OF AIR –CONDITIONER/CHESTFREEZER/REFRIGERATOR

* G.I.LADDER & PERFORATEDTRAYS

* ALUMINIUM DOORS &WINDOWS (ALUMINIUMFABRICATION)

* LEAF SPRINGS FORTRACTOR DRAWNTROLLEYS & FOURWHEELER TEMPOS

* STEEL BRIGHT BARS* AUTOMOTIVE ENGINE VALVE* AUTOMOTIVE BRAKING

SYSTEM* DISPLAY COOLER* ERW STEEL PIPES & TUBES* STEEL INGOTS* TMT STEEL BARS (SARIYA)* AUTOMOBILE TRACTORS* ACTIVATED ALUMINA BALLS* ALUMINIUM FOIL* STONEWARE PIPE

(S.W.PIPE)/ CLAY PIPE* IRON ORE PELLETIZATION* ELECTRIC CONTROL PANEL* SOLAR PV POWER PLANT* MACHINE SHOP (FOR OIL

AND GAS ENGINEERINGINDUSTRY, AEROSCAPEENGINEERING INDUSTRY)

* STEEL BRIGHT BARS* CEILING FAN* COPPER STRIP COILS FROM

SCRAPS* PRODUCTION OF PV

PANELS (SOLAR PV PANELS)* ROTARY AIR LOCKS, SCREW

CONVEYOR, MOTORIZED/PNEUMATIC DAMPER, FLAPVALVES, AIR SLIDESREQUIRED IN CEMENTPLANTS AND THERMALPOWER PLANT

* ALUMINIUM EXTRUSION

* ALUMINIUM COIL COATINGFOR ACP AND ROOFING IND.

* PAVING BLOCK* WIRE NAILS* TMT STEEL BARS* FASTENERS/NUT & BOLTS

(INDUSTRIAL &AUTOMOBILE)* HYDRAULIC CYLINDERS* DISPOSABLE SYRINGES

WITH NEEDLE PLANT* FABRICATION UNIT

(PRESSURE VESSEL,REACTOR VESSEL &AGITATORS, HEATEXCHANGERS) & SEAMLESSPIPES AND TUBES

* COPPER POWDER FROMCOPPER SCRAP

* STONE CRUSHER* PRODUCTION OF ALL

TYPES OF FANS SUCH ASAXIAL FANS,CENTRIFUGALFANS (SMOKE EXTRACTFANS & FRESH AIR SUPPLYFANS), BATHROOM FANSETC.

* STONE MINING* MAHINDRA CAR

DEALERSHIP WITHAUTOMOBILE SERVICESTATION/GARAGE

* AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

* AAC & ACSR ALUMINIUMCONDUCTORS

* MANGANESE ORE JIGGING* STEEL TRANSMISSION LINE

TOWERS AND ROLLING MILLTO PRODUCE STEELSECTIONS

* FERRO SILICON (FROMMINERAL INGREDIENTS)STAINLESS STEEL TUBES

* M.S.FASTENERS ANDS.S. FASTENERS

* PREFABRICATED STEELFRAMED BUILDINGMANUFACTURING PLANT

* LEAD ACID BATTERY* GALVANISED WIRE* POWER TRANSFORMER

(50 KVA TO 2000 KVA)* M.S. PIPE* GALVANISED IRON SHEETS* M.S.BILLETS* STEEL GRATING

(GALVANISING ELECTROFORGED STEEL GRATING)

* ALLOY WHEELS PLANT* ESTABLISHMENT OF

MANUFACTURING OFREFRIGERATING APPLIANCE

* WELDED WIRE MESH* ALUMINIUM COLD

ROLLING MILL FORSHEETS & CIRCLES

* ALUMINIUM ROLLINGMILL FOR MANUFACTURINGALUMINIUM CIRCLES

REQUIRED FORPRESSURE COOKERS,NON STICK COOKWARES& CIRCLES

* LPG CYLINDER* ALUMINIUM COMPOSITE

PANNELS* DEEP FREEZER

ENVIRONMENTALCLEARANCE FOREXPANSION OF INGOTS/BILLETS PLANT

* FERRO SILICON BYSMELTING PROCESS

* ALUMINIUM CONDUCTOR* PRESTRESSED

CONCRETE POLES* FASTENERS (NUT & BOLT)

USED IN OIL AND GAS* ALUMINIUM ALLOY PLANT* STAINLESS STEEL SINKS* ALUMINIUM ALLOY PLANT* P.V.C BATTERYSEPARATOR* AUTOMOTIVE TYRE AND

TUBE VALVES (VALVESMANUFACTURING)

* PRESSURE COOKWAREALUMINIUM, STAINLESSSTEEL & HARD ANODIZED

* ELECTRIC WATER HEATER* SOLAR WATER HEATER

DOMESTIC & INDUSTRIAL* CORRUGATED

COLOURED ROOFINGGALVANISED IRON SHEET

* PRESSURE DIE CASTING* G.I.WIRE AND BARBED

WIRE* G.I.WIRE & M.S. BINDING

WIRE* HOT DIP GALVANIZING

PLANT FOR STRUCTURALSTEEL AND PIPES

* COLD ROLLING MILL* DOOR HINGES (MILD

STEEL AND STAINLESSSTEEL)

* PRESSURIZED AEROSOLS(LIKE BODY SPRAYS,PERFUMES, SHAVINGFOAM AND SHAVING

LOTIONS ETC.)* ANHYDROUS SODIUM

DITHIONITE PRODUCTION(SODIUM FORMATEPROCESS)

* SODA ASH PLANT (FROMSOLUTION BRINE)

* SISAL FIBREREINFORCED

* CEMENT ROOFING SHEET* HIGH ALUMINA

REFRACTORY BRICKPLANT

* CATHETERSMANUFACTURING

* SURGICAL RUBBERDISPOSABLE GOODS

* POULTRY AND HATHERYFARMING

* MILK PROCESSING PLANT* ROASTED, SALTED ALMONDS,

PEANUTS FOR PACKING IN25g, 50g,250g & 500g SACHET-S

* BEER FROM POTATOES* GUAR GUM POWDER* AUTOMATIC WHITE BREAD

MAKING PLANT* AUTOMATIC BISCUIT MAKING

PLANT* FROZEN FOOD BY IOF

TECHNOLOGY* WALNUT PROCESSING PLANT* WHIPPING CREAM FRUITS &

VEGETABLES POWDER UNIT(EXPORTS ORIENTED UNIT)

* NATURAL MEDICINE &RESEARCH INSTITUTEWITH 150 BEDS HOSPITAL

* PACKAGED DRINKING WATER(PACKED IN 330 ml CUP, 500MLBOTTLE, 1500 ML BOTTLE AND20 LTR. JAR)

* COLD STORAGE(CONTROLLED ATMOSPHEREOR CA) FOR POTATO CAP:1,00,000 BAGS (50 Kg/Bag),STORING CAP: 5000 Mt,SOLVENT EXTRACTION& REFINING (SOYABEAN) (Cap-250mt/day & 50mt/Day oilRefining)

* BOTTLING PLANT (WHISKY,BRANDY, RUM, VODKS, GIN)FROM RECTIFIED SPIRIT/ENALUBE OIL BLENDING ANDGREASES PLANT

* COLD STORAGE FOR POTATO1,00,000 BAGS (50 KG/BAG)

* MAIZE FLOUR & BY PRODUCTMANUFACTURING PLANT

* CUT FLOWER (GLADIOLI,MARIGOLD, STATICE,CHRYSANTHEMUM ROSEWITH GREEN HOUSE)

* CATTLE FARMING ANDDAIRY PRODUCTS

* COLD STORAGE FORPOTATOAND OTHER HORTICULTUREPRODUCTS Cap:- 5000 Mtor 100000 Bags (50 Kg/Bag)

* DEXTROSE PLANT* SBR RUBBER SHEETS AND

SHOE MANUFACTURING* CASHEW NUT PROCESSING* PLYWOOD AND PLYBOARD

PARTICLE BOARD ANDLAMINATED PARTICLE BOARD

* VENEER MAKING, PLYWOOD& PLYBOARD MAKING

* WALNUT & PINUS(CHILGOZA)OIL, SHELL POWDERPROCESSING PLANT

* COUNTRY LIQUOR BOTTLINGPLANT (1,00,000 BOTTLES/DAY)

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”


* PLASTIC GRANULES FROMPLASTIC WASTE

* ROPE AND SUTLI MAKINGPLANT

* BOTTLING PLANT (COUNTRYLIQUOR) 10,000 LTRS./DAY)

* I.V. FLUID (FFS OR BFSTECHNOLOGY)

* TOXIN PAN MASALA,TOBACCO LESS GUTKHAAND ZARDA

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* UPVC DOORS & WINDOWSFABRICATING PLANT (Fixingand Installation of Door andWindows of uPVC profiles)

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* MUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)

* MEDICAL COLLEGE WITH750 BEDS HOSPITAL FACILITY

* MICRO IRRIGATIONPRODUCT MANUFACTURINGPLANT

* HOT DIP GALVANIZINGMUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)CEMENT TILES, CANAL LINESLAB, KERV STONE, PAYERRCC PIPE, MANOHOLECOVER,ENTERLOCKING ETC.MANUFACTURING PLANT

* MEDICAL COLLEGE (100STUDENT INTAKECAP. MEDICAL COLLEGEWITH 500 BED HOSPITAL)

* ESTABLISHMENT OF APRIVATE UNIVERSITY

* DIGITAL INKS* GALVANIZING PROCESS

PLANT FOR ELECTRICALPOLES

* MAIZE PROCESSING PLANT* STARCHES / MODIFIED

STARCHES/ LIQUID GLUCOSE/ DEXTROSE MONOHYDRATE/GLUCOSE SYRUPS / CORNSYRUP SOLIDS / HIGHMALTOSE CORN SYRUPS /MALTO DEXTRINE POWDER /CORN GLUTEN MEAL (60%)MAIZE OIL / SORBITOL.

* BABY CARE PRODUCTS* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* BOTTLING OF WHISKY* UPVC DOORS & WINDOWS

PROFILES* EPDM RUBBER PROFILES* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* FAST FOOD RESTAURANT

WITH CENTRALLISEDKITCHEN

* READY MADE GARMENT(T-SHIRT/POLO GOLFER/WOVEN SHIRTING & SUITINGFOR UNIFORMS/SWEATERS)MANUFACTURING

* BIO-DIESEL EXTRACTIONFROM JATROPHA,SOYABEAN, SUNFLOWER,RICE BRAN, ALGE &CULTIVATION OF JATROPHA

* FAST FOOD RESTAURANTCHAIN WITH CENTRALLISEDKITCHEN

* GUAR SPLIT POWDER ANDOTHER BY PRODUCTS

* SOLVENT EXTRACTIONPLANT (COTTON SEED)

* RASGULLA MANUFACTURINGAND CANNING

* CULTIVATION OF RICE &WHEAT COMMERCIAL &MECHANISED DEVELOPMNT

* MAIZE & BY PRODUCTSPROCESSING -STARCHMODIFIED STARCHES/LIQUIDGLUCOSE/DEXTROSEMONOHYDRATE/GLUCOSESYRUPS/CORN SYRUPSOLIDS/HIGH MALTOSECORN SYRPS/ MAITODEXTRINE POWDER/CORNGLUTEN MEAL (60%) MAIZEOIL/SORBITOL

* TEAK FARMING* ARTIFICIAL MARBLE

(SYNTHETIC)* POTATO STARCH CARDANOL

FROM C.N.S.L. (CASHEWNUTSHELL LIQVID

* INTEGRATED SCRAP YARD* POTATO STARCH* MANGO PULP (5 TON/HOUR

200 KG ASEPTIC PACKAGING)* BOTTLING PLANT (WHISKY,

BRANDY, RUM, VODKA, GIN)FROM RECTIFIED SPIRIT/ENA

* COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) ANDMILK PROCESSING MILK/DAYCAP-50,000 LTR/DAY

* WHEAT FLOUR MILL* CHAKKI FLOUR MILL* I.V. FLUID (FFSTECHNOLOGY)* LIQUID GLUCOSE FROM

POTATOES* SORBITOL FROM MAIZE

STARCH* WALNUT PROCESSINGPLANT* SOLVENT EXTRACTION AND

OIL REFINERY CUM PACKINGOF RICE BRAN OIL

* COTTON SEED OIL SOLVENTEXTRACTION PLANT

* MARINE TRAINING INSTITUTE& PLACEMENT SERVICEPROVIDING AGENCY

* I.V.FLUID (FFS TECHNOLOGY)* CERAMIC FIBERS, CERAMIC

FIBRE BLANKET, CERAMICFIBRE BOARD AND CERAMICFIBRE ROPE

* COLD SUPPLY CHAIN* LAMI TUBE MANUFACTURING* EYE DROP 3 PIECES

(PLASTIC VIALS)* PET BOTTLES (CAMBER/

CLEAR IN COLOUR) CAP:15ML,60ML 100ML,135ML,200ML & 500ML

* BENZYL ALKONIUMCHLORIDE (BKC)

* NATURAL SUGAR WAX* MARGARINE BUTTERFROM

VEGETABLE OIL* GREEN HOUSE FOR CROP

PRODUCTION* ORGANIC DAIRY FARMING* E-WASTE* BIO-DIESEL FROM ALGAE* VANADIUM PENT OXIDE

GRAPHITE MINING ANDBENEFICIATION PLANT

* VITAMIN WATER* PET PREFORM CUM PET

BOTTLES* ORGANIC DAIRY FARMING

AND PRODUCING WHOLEMILK POWDER (WMP)

* HDPE BOTTLES* CAUSTIC SODA FROM

SODIUM CHLORIDE* COAL TAR PITCH* MOSQUITO REPELLANT* WRIST BAND* CASTOR OIL AND ITS

DERIVATIVES OLEO RESIN,TURKEY RED OIL, DCO, HCO,SEBACIC ACID, 12-HYDROXYSTEARIC ACID

* PAPAIN FROM PAPAYA* PROCESSED CHEESE* MONOCHLOROBENZENE* EUGENOL FROM CINNAMON

OIL* SULPHUR 80% WDG* CERAMIC FIBERS,

CERAMIC FIBRE BLANKET,CERAMIC FIBRE BOARDAND CERAMIC FIBRE ROPE

* SCREEN PRINTING* DI CALCIUM PHOSPHATE

FROM ROCK PHOSPHATE& HAIFA PROCESS

* PVC FLEXIBLE PIPE* FLEX BANNER USED IN

DIGITAL PRINTING* PIGMENTS BINDERS FOR

TEXTILE PRINTING* POULTRY & HATCHERY FARM* ALOEVERA JUICE AND GEL* LIME PUTTY* AUTOMOBILE WORKSHOP/

GARAGE* EGG TRAY FROM PULP* CARDANOL FROM C.N.S.L.* OXYGEN GAS

* POLYALUMINIUM CHLORIDE* NAMKEEN INDUSTRY

(BHUJIA, CHANACHUR ETC.)* POLYOL USED FOR

POLYURETHANES* POLYSTYRENE POLY

PROPYLENE OXIDE* DIETHYL PHTHALATE* UREA FORMALDEHYDE AND

MELAMINE* FORMALDEHYDE MOULDING

POWDER* INSTANT COFFEE* ANNATTO SEED COLOUR

EXTRACTION* FRUITS AND VEGETABLES

DRYING BY (FREEZE DRYINGMETHOD)

* BIO GAS PRODUCTION ANDBOTTLING PLANT

* JAM, JELLIES, FRUIT JUICEAND ALLIED PRODUCTSMATERNITY NURSING HOME

* CANNING & PRESERVATIONOF VEGETABLES

* CURCUMIN & TURMERIC OILFROM TURMERICDETERGENT WASHINGPOWDER (ARIEL TYPE)

* GRANITE SLAB AND TILES* TEA PACKAGING* PAN MASALA & GUTKHA* PRESTRESSED CONCRETE

ELECTRIC POLES* LEATHER SHOES* ROTOGRAVURE PRINTING

(FOR FLEXIBLE PACKAGING)* AUTOCLAVED AERATED

CONCRETE BLOCKS* OXYGEN AND NITROGEN

GAS PLANT* MANGANESE ORE

BENEFICATION* MINERAL WOOL* CALCIUM SILICATE* TOUGHENED GLASS* HUMIC ACID* OFFSET PRINTING UNIT

(5 COLOUR)* CASTOR OIL AND ITS

DERIVATIVES OLEORESIN* TISSUE PAPER PULPING

FROM SAW DUST* KNITTED GLOVES* RADIATOR COOLANT* LATEX FOAM RUBBER

(SPONG RUBBER)* GARLIC OIL AND POWDER* ACTIVATED CARBON &

SODIUM SILICATE FROMPADDY/ RICE HUSK

* TRIETHYLENE GLYCOL* RAMMING MASS* WOOD PEELING &

VENEER MAKING* PETROLEUM JELLY* DAIRY FARM (COW &

BUFFALO) TO PRODUCE

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:

ENGINEERS INDIA RESEARCH INSTITUTE4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361

Email: [email protected], [email protected] Website: www.eiriindia.org, www.eiribooksandprojectreports.com


MILK & PACKAGING INPOUCHES

* CUTTING OIL LIQUID GOLD(IN PASTE FORM)

* P.V.C. LEATHER CLOTH(REXINE)

* COAL TAR DISTILLATION* ALUMINIUM LABEL PRINTING* FOLDING CARTNS/MONO

CARTONS* SURGICAL DISPOSABLE

GLOVES (DIPPED RUBBERGOODS)

* AGRICULTURAL CHEMICAL(PLANT GROWTH PROMOTERAND PLANT GROWTHREGULATOR)

* MENTHOL BOLD CRYSTALSFROM MENTHOL FLAKES

* ORGANIC FARMING* CORRUGATED

POLYCARBONATE SHEET* COLD STORAGE* FLAT PVC LAMINATED* SAFTY GLASS/TOUGHENED

GLASS* PLASTIC GRANULES FROM

WASTE* DRY WALL PUTTY (WHITE

CEMENT BASED)* CHARCOAL BRIQUETTE* OXALIC ACID FROM

MOLASSES* POTATO GRANULES* SANITARY NAPKINS & BABY

DIAPERS* CORRUGATED BOXES* PLASTER OF PARIS* RUBBER ROLLER FOR

PRINTING MACHINE* LACTIC ACID* EMERY PAPER (SAND PAPER)* RUBBER RECLAIM SHEET

FROM USED BUTYL TYREAND TUBE

* MANGO PULP* PARTICLE BOARD FROM

BAGASSE AND RICE HUSK* TOILET PAPER & NAPKINS* TENDER COCONUT WATER* CALCIUM CARBONATE* LIME CALCINATION PLANT* INJECTION MOULDED

PLASTIC COMPONENTS* HYDRATED LIME* BLACK PEPPER* MULTIAXIAL GLASS FABRIC* LIQUID TOILET CLEANER

(HARPIC TYPE)* LIME & PRECIPITATED* CALCIUM CARBONATE* LIQUID GLUCOSE FROM

BROKEN RICE

* MEDICAL DISPOSABLEPLASTIC SYRINGES

* METAL POLISHING BAR* SANITARY NAPKINS & BABY

DIAPERS* PERFUMES/ATTAR* GEMS AND JEWELLERY* MULTIAXIAL GLASS FABRIC* ACTIVE ZINC OXIDE* COPPER PHTHALOCYANINE* TURMERIC OIL EXTRACTION

FROM DRY TURMERIC* CNSL BASED RESIN IN

LIQUID & POWDER FORMBOPP FILM

* BETA IONONE* BIO-FERTILIZER* ZINC & COPPER SULPHATE* PAPER BASED PHENOLIC

SHEET (FOR ELECTRICALAPPLIANCE)

* THINNERS (WHITE SPIRITBASED)

* SINGLE SUPER PHOSPHATE& SULPHURIC ACID

* MONO CALCIUM PHOSPHATE& DI-CALCIUM PHOSPHATE

* FLEXIBLE P.U. FOAM* ASPIRIN* SORBITOL FROM MAIZE

STARCH* SPICE OIL & OLEORESIN* ANTI-FOAMING AGENT

(SILICONE BASED) FORDISTILLERY, SUGAR, PAPERPLANT ETC.

* LAUNDRY & DRY CLEANER* BRICKS FROM STONE DUST* CARBOXY METHYL STARCH* TITANIUM DIOXIDE* UNDECYENIC ACID* PSA BASED NITROGEN

GENERATOR* SYNTHETIC IRON OXIDE* PVC INSULATION TAPE* TAMARIND KERNEL POWDER* ORGANIC CHEMICAL &

SOLVENTS* PLASTICIZERS* ICE PACK (SOLUTIONS

TYPE, VIOLET-SEMI SOLIDPOLYMER TYPE)

* GUM FROM TAMARIND* PEARL SUGAR CANDY

(MISHRI)* GOAT & SHEEP FARMING* GYPSUM PLASTIC BOARD

(AUTOMATIC PLANT)* NON-WOVEN INDUSTRY

(CARRY BAGS, SURGICALGOWN, FACE MASK, ROUNDCAPS, SHOE COVER, GLOVE)

* COTTON SPINNING, SIZING,

YARN, DYEING & WEAVING* CALCIUM CHLORIDE* AMINES & ALLIED PRODUCT* SPINNING COTTON* SILICONE FROM RICE HUSK* ADHESIVE (FEVICOL TYPE)* CAUSTIC SODA FROM

ELECTROLYSIS* CAMPHOR TABLETS* CERAMIC GLAZED WALL

AND FLOOR TILES* ZINC SULPHATE MONO* ETHANOL (BIO FUEL)

FROM RICE STRAW* GYPSUM MOULDING AND

GYPSUM BOARD* SMOKELESS COAL* ACID (SILICA) AND BASIC

RAMMING MASS* UNSATURATED

POLYESTER RESINS* DAIRY (BUFFALO) FARMING

SILICONE FROM RICE HUSK* N-ACETYL THIOZOLIDINE-

4-CARBOXYLIC ACID (NATCA)* PE BASED CARBON BLACK

COMPOUND* ONION DEHYDRATION* PVC PIPES & FITTING* GLASS REINFORCED* GYPSUM MOULDINGS

ABSORBENT COTTON &SURGICAL BANDAGES

* CALCIUM STEARATE BYFUSION PROCESS

* MANGO POWDER & OTHERFREEZE DRIED PRODUCTS

* MENTHOL OIL FROMLEAVES AND MENTHOL

* CRYSTALS (PEPPERMINT)MANUFACTURE OFCELLULOSE ACETATE

* ANTIFOAMING /DEFOAMING AGENT

* ALOEVERA CULTIVATION &PROCESSING

* SYNTHETIC MAGNESIUMSILICATES

* EPHEDRINEHYDROCHLORIDE

* ACTIVATED BLEACHNGEARTH

* TECHNICAL TEXTILES* FORMALIN FROM

METHANOL* CATIONIC SOFTNER

(STEARIC ACID BASED)* PRECIPITATED SILICA* PU BASED FOOT WEARS* FORMALDEHYDE RESIN

(UREA, PHENOL, MELAMINE)* HDPE MONO FILAMEN NET* POTATO & ONION FLAKES

* DUSTLESS CHALK(SCHOOL CHALK)

* TOMATO POWDER* BIODEGRADABLE /

COMPOSTABLE PLASTICS* ACRYLIC CO POLYMER

EMULSION* ESTER GUM (FOOD GRADE)* PROTEIN BASED FOAMING

AGENT* LECITHIN (SOYA BASED)* SOYA OIL AND CATTLE

FEED FROM SOYABEAN

* COMPARISON BETWEENFLY ASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* CELL CAST ACRYLICSHEET

* ACRYLIC BATH TUB ANDSHOWER TRAY

* THERMOCOLE BASEDDISPOSABLE PLATES

* SODIUM SILICATE FROMRICE HUSK

* ETHYL METHACRYLATE* SODIUM LAURYL ETHER

SULPHATE* LATEX GLOVES,

CONDOMS & CATHETER* CALCIUM NITRATE

GRAIN BASED ALCOHOLDISTILLERY

* BULK DRUGS* MARBLE QUARRYING* CULTIVATION OF

CAPSICUM IN GREENHOUSE

* SULPHUR 90% WDG* EGG POWDER* WOOD PLASTIC* COMPOSITE BOARD LINE* SODIUM LAURYL SULPHATE

AND SODIUM LAURYLETHER SULPHATE

* FISH PROCESSING* BABY CEREAL FOOD & MILK

POWDERS (BABY FOOD)* GUR (JAGGERY)* DAIRY PRODUCTS* CHLORINATED PARAFFIN

WAX (CPW)* HAND WASHING

DETERGENT POWDERUSING THE DRY MIXPROCESS INCLUDINGFORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* HANDWASHING DETERGENTPOWDER USING THE DRYMIX PROCESS INCLUDING

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:

ENGINEERS INDIA RESEARCH INSTITUTE4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361

Email: [email protected], [email protected] Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

TERMS AND CONDITIONS

Ask for the quotation for the required project report [email protected] or [email protected]

Mob: +91 9811437895 or +91 9811151047

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : [email protected], [email protected]

* Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Deposit the amount in “EIRI “Account with HDFC BANK CA-05532020001279 (RTGS/NEFT/IFSC CODE: HDFC00001981) OR ICICI

BANK CA - 038705000994 (RTGS/IFSC CODE: ICIC0000387) ORAXIS Bank Ltd. CA- 054010200006248 (RTGS/IFSCCODE:UTIB0000054) OR UNION BAK OF INDIA CA-

307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/IFSC CODE:

SBIN0001273) & SMS ON PH. 09811437895

FORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* DIGITAL PHOTOPAPER/INKJET PHOTOPAPER

* KAOLIN FOR ROAD MAKING* PEPPERMINT CULTIVATION &

PROCESSING* PEPPERMINT CULTIVATION &

PROCESSING* HDPE PIPE* ACTIVATED CARBON FROM

RICE HUSK* HT & LT INSULATOR, HT AIR

BRAKE SWITCH D.O. FUSE,LIGHTENING ARRESTOR

* PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKINGWATER, EDIBLE OILS

* ALCOHOLIC BEVERAGES(COUNTRY LIQUOR & IMFL)

* QUARTZ BASED INDUSTRIES(QUARTZ POWDER SILICASAND SILICA RAMMINGMASS FUSED SILICA)

* BEEDI (BIDI) BY MACHINE* RICE SHELLER* FRUIT RIPENING CHAMBER* MINERAL WATER AND PET

BOTTLING PLANT* DIAGNOSTIC LAB AND* ONLINE TRADING BUSINESS* CEREAL MILLING* MINI OIL PLANT SUITABLE

FOR GROUNDNUT OIL ANDCOTTON SEED OIL

* CHANACHUR, BHUJIA,GANTHIA (AUTOMATICPLANT)

* KHADYA SURAKSHA (FOODSECURITY)

* PLASTIC WATER STORAGETANKS

* ZINC SULPHATE,MONOHYDRATE & HEPTAHYDRATE

* CIGARETTEMANUFACTURING UNIT

* CATTLE FEED PELLETSPLANT FOR COW &BUFFALOE FOR BOOSTINGMILK AND GROWTHTYRE RECYCLING UNIT

* PAPAIN EXTRACTIONINDUSTRY

* CAKE SHOP* BUSINESS PROCESS

OUTSOURCE (B.P.O.)* EMPTY HARD GELATINE

CAPSULES* BIOFERTILIZER* PLASTIC MOULDING UNIT

(CHAIR, TABLES &VEGETABLE TRAYS)

* GOLD POTASSIUM CYANIDE(G.P.C.)

* HDPE, PVC & CPVC PIPESAND FITTINGS

* NO CARB PASTE(ANTICARBURIZING PASTE-WATER SOLUBLE) FOR HEATTREATMENT

* CONVERSION WASTEPLASTIC WITH TYRE INTOACTIVATED CARBON ANDINDUSTRIAL FUEL

* PYROLYSIS PLANT FROMPLASTIC & RUBBER

* COMPARISON BETWEEN FLYASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* AGAR AGAR* NAIL POLISH* PLASTIC GRANULES FROM

WASTE* AGARBATTI SYNTHETIC

PERFUMERY COMPOUNDS &AGARBATTI COMPOUNDSLIKE (CHAMPA, MOGRA,SANDAL WOOD & LOBAN)

* PET PREFORM AND PETJARS (20 LTRS CAPACITY)

* KRAFT PAPER FROM 100%WASTE PAPER

* PRIVATE UNIVERSITY* LIQUID GLUCOSE AND

MALTODEXTRIN FROMBROKEN RICE

* DRY WALL PUTTY (WHITECEMENT BASED)

* CONSTRUCTION CHEMICALSOT PASTE

* FUSED SILICA FROM SILICASAND

* BANANA CHIPS, BANANAPULP & BANANA POWDER(BANANA PRODUCTS)

* CONFECTIONERY UNIT(TOFFEE, CANDY /LOLLIPOPCHEWING GUM, BUBBLEGUM CHOCOLATE)

* FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE& THEIR MODIFIED RESINS)

* EPDM RUBBER PROFILES(WEATHER STRIPS,INDUSTRIAL MONOSTRIPSETC)

* GRANITE CUTTING ANDPOLISHING UNIT (100% EOU)

* SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE& PLASTER CART (READYMADE) E.G. GYPSONA 3MCART

* ENTERTAINMENT CLUB,HOLIDAY RESORT, 4 STARHOTEL, AMUSEMENT PARKCUM WATER PARK,MUSHROOM & ITSPRODUCTS, FISH FARMING,LAKE FOR BOATING, DEERPARK ETC.

* HDPE, PVC, LLDPE PIPES/TUBES AND FITTING

* EPOXIDIZED SOYABEAN OIL(SECONDARY PLASTICIZER)USED IN PVC COMPOUND

* POULTRY PROCESSINGPLANT

* B.O.P.P. SELF ADHESIVETAPES

* I.V.SET* MANGANESE OXIDE AND

MANGANESE SULPHATE* ODOURLESS NYLON

GRANULES FROM FIBER OFWASTE TYRE WITHOUTCHANGING PROPERTIES OFNYLON

* PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGAR CANE BAGASSE ORMIXED OF ALL ABOVEPOULTRY LAYER ANDBROILER FARMING

* TOMATO, GUAVA AND MANGOPULP

* GREEN HOUSE* HYDROXY PROPYL GUAR

(HPG) AND CARBOXYMETHYL HYDROXY PROPYLGUAR

* BATHSOAP MANUFACTURE* PLASTIC MOULDED CHAIRS

FROZEN POTATO PATTY* CALCIUM ALUMINATE* ACTIVATED CARBON FROM

COCONUT SHELL* RIGID PVC FILM

MANUFACTURE FORPHARMACEUTICALS BLISTER

PACKAGING* NYLONE 66 CURING TAPE

USED IN RUBBER HOSE PIPEWRAPPING

* ANTIFOAMING/DEFOAMINGAGENT LIKE ANTAROL T-709

* SOY AND GLUTEN BASEDMOCK MEAT

* KRAFT PAPER USING WASTEPAPER AND OLDCORRUGATED CARTONS

* GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

* DISPOSABLE SYRINGES ANDNEEDLE PLANT (Single UseSyringes, Single Use Needles &As Syringes)

* DIRECT FILLED BALL PEN(USE AND THROW)

* BENZALKONIUM CHLORIDE* SPINNING COTTON (COTTON

SPINNING PLANT)* CALCIUM CHLORIDE USING

LIME STONE ANDHYDROCHLORIC ACID

* RUBBER POWDER FROMWASTE TYRES

* CALCINATION PLANT FORPYROPHYLLITE ANDDIASPORE MINERALS BYVERTICAL SHAFT KILNPROCESS

* ONION, GARLIC & GINGERDEHYDRATION PLANT

* POTASSIUM NITRATE* POTASSIUM SULPHATE* N.P.K. FERTILIZER* CHICORY EXTRACT

(ROASTED CHICORYGRANULES/CUBES, LIQUIDEXTRACT ETC.)

* SOLID WASTE SEGREGATION* LAMITUBE MANUFACTURE* BOARDING SCHOOL* CERAMIC FUSE TUBE/

BARRELS USED IN HRC FUSE* SODIUM POLYACRYLATE

DISPERSANT FOR USE INWATER BASED PAINT WITHDISPERSANT FOR PIGMENT

* NAIL POLISH, LIPSTICKS,NAIL POLISH REMOVER

* SOYA PRODUCTS (MILK,PANEER, TOFU, BUTTER,CHEESE CURD/YOGURT, ICECREAM) WITH PACKAGINGUNIT

* GREASE MANUFACTURING



Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$

CHEMICALS, DYES, LUBRICATINGOILS, PETRO CHEMICALS

ELECTROPLATING

AVAILABLE PROCESS TECHNOLOGY BOOKS AT www.eiriindia.org

* Small Medium & LargeChemical Industries 375/- 40

* Industrial ChemicalsTechnology Hand Book 1100/-110

* Modern Technology ofOrganic & InorganicChemicals 1400/-140

* Electroplating, Anodizing &Surface Finishing Tech. 1100/-110

* Hand Book of Agro ChemicalIndust.(Insecticide & Pesticide) 900/- 90

* Technology of Synthetic Dyes,Pigments Intermediates 1100/-110

* Petrochemicals, Lubricants,Greases & Petroleum Refining 900/- 90

* H.B.of Lubricants, Greases &Petrochemicals Technology 750/- 75

* Technology of Gums, Adhesives& Sealants with Formulations 950/- 95

* Hand Book of Adhesiveswith their Formulae (2nd Edn.) 900/- 65

* Adhesives Technology &Formulations Hand Book 975/- 98

* Technology of Glue &Adhesives with AdhesivesBonding and Formulations 1100/-110

* Complete Hand Book onAdhesives and AdhesionTech. with Project Profiles 900/- 90

* Start Your Own ExportBusiness (How To Export) 450/- 45

* Start Your Own SmallBusiness and Industry 350/- 35

* Candle Making Processes &Formulations Hand-Book 750/- 75

* Stationery, Paper Converting& Packaging Industries 400/- 40

* Modern Inks Formulaes &Manufacturing Industries 325/- 35

* Profitable Businesses toStart for Entrepreneurs 400/- 40

* Modern Small & CottageScale Industries 650/- 65

* Profitable Small Cottage Tiny& Home Industries (2nd Edn.) 900/- 90

* Technology of Bio-Fuel(Ethanol & Biodiesel) 975/-100

* Mod. Tech. of Bioprocessing 1475/-150* ModTech.of BioGasProduction1975/-200

GUMS, ADHESIVES & SEALANTS

BIO FUEL, BIO GAS &BIOPROCESSING

* Tech of Sweets (Mithai) 1050/-110* Technology of Sweets (Mithai),

Namkeen and Snacks Foodwith Formulae 1750/- 175

* Mfr. of Snacks Food, Namkeen,Pappad & Potato Products 900/- 90

* Technology of Water andPackaged Drinking Water 1100/- 110

PACKAGED DRINKING WATER

PRINTING & PACKAGING* Complete Hand Book on Packaging

Technology & Industries 1100/-110* Printing Process Tech&Indt. 375/- 40* Hand Book of Printing Technology

(Offset, Screen, Flexo, Gravure,Inkjet & Digital) 975/-100

* Hand Book of Offset PrintingTechnology 500/- 50

* Screen Printing withProcesses & Technology 350/- 35

* Hand Book of Prepress 800/- 80* Hand Book of Packaging Indus1300/-130* Modern Packaging Technology

for Processing Food, Bakery,Snack Foods, Spices andAllied Food Products 900/- 90

* Food Packaging Tech. 900/- 90* Tech. of Printing Inks 1150/-115* Packaging Technoloy 1150/-115* Corrugated Boxes 1100/-110

* Paint Pigment Varnish &Lacquer Manufacturing 450/- 45

* Paint Varnish Solvents& Coating Technology 800/- 80

* Paint, Pigment, Solvent,Coating, Emulsion, PaintAdditives & Formulations 950/- 95

* Technology of Coatings, Resins,Pigments & Inks Industries 975/-100

* Mfg. Tech. & Formulations H.B.on Thinners, Putty, Wall & Indu.Finishes & Synthetic Resins 900/- 90

* Technology of SyntheticResins & Emulsion Polymers 975/-100

* Technology of Paints andCoatings with Formulations 1750/-175

* Powder Coating Technology 750/- 75* Paint Technology Hand Book

with Formulations (AcrylicEmulsion, Powder Coating, Levelling Agents, PU Ink Binders,Dispersing Agents,Formaldehyde,Polyester Resin, Acrylic Bindersand PU Coatings) 1100/- 110

* Complete Hand Book on Paints,Varnish, Resins, Copolymers andCoatings with ManufacturingProcess, Formulations/Tech 900/-90/-

* Manufacture Of NitrocelluloseLacquers, Pu Lacquer, VacuumMetallizing Lacquers And OtherLacquers With FormulationsAnd Project Profiles 750/- 75/-

* Moulds Design & ProcessingHand Book 495/- 50

* Hand Book of Plastic Materials& Processing Technology 750/- 75

* Injection Moulding of Plastics750/-75* Plastic Processing &

Packaging Industries 975/-100* Plastic Waste Recycling Tech.750/-75* Technology of Plastic Films 650/- 65* Rotational Moulding Technology

HandBook 750/- 75* Plastic Compounding, Master

Batches, PET & Other Plastics750/-75* Synthetic Resins Technology

with Formulations 800/- 80* Technology of PVC Compounding

& Its Applications 900/- 90* Polymer & Plastic Technology950/-90* H.B. of Fibre Glass Moulding450/-45* Techn. of Reinforced Plastics750/- 75* Plastic Additives Technology 950/- 95* Technology of PET Bottles,

Preform and PET Recycling 850/- 85* Modern Technology of

Extrusion & Extruded Products 800/- 80* Technology of Synthetic

Resins & Emulsion Polymers 975/-100* Technology of Plastic Additives

with Processes and Packaging 900/- 90* Complete Technology Book On

Identification Of Plastics AndPlastic Products Materials 975/-100

* Identification Of Plastics & OtherPlastic Process Industries 950/- 95

* Complete Technology BookOf Plastic Processing AndRecycling Of Plastics WithProject Profiles 1250/-125

* Complete Hand Book Of BlowMoulding Plastics TechnologyWith Project Profiles 975/- 98/-

* Modern Technology Of InjectionMoulding, Blow Moulding,PlasticExtrusion,Pet & Other 975/-100

* Tech Book On Beekeeping AndHoney Products WithProject Profiles 975/- 98

* Complete Technology Book onHoney Processing andFormulations (Harvesting,Extraction, Adulteration,Chemistry, Crystallization,Fermentation, Dried Honey,Uses, Applications andProperties) 1100/- 110

* Modern Bee Keeping &Honey Processing 375/- 40

* Technology of StarchManufacturing (Applications,Properties and Composition)with Project Profiles 1100/- 110

PAINT, VARNISH, SOLVENTS,POWDER COATING & LACQUERS

PLASTIC/POLYMER PROCESSING,COMPOUNDING, INJECTION

MOULDING, ROTATIONALMOULDING, PLASTIC FILM, FIBRE

GLASS, PLASTIC WASTERECYCLING, MOULDS, PET &

RESINS, ADDITIVES INDUSTRIES

SMALL SCALE INDUSTRIES,STATIONERY, PAPER, INKS,

CANDLES & EXPORT BUSINESS

SWEETS, NAMKEEN & SNACK FOOD

BEE-KEEPING & HONEYPROCESSING

STARCH MANUFACTURING


LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ Name of Books Rs. US$

* Poultry Farm & Feed Formulae 575/- 58* Hand Book of Pig Farming 400/- 40* Agro Based H.B. of Plantation,

Cultivation & Farming 500/- 75* Agro-Based Plantation

Cultivation & Farming 475/- 50* Agro Chemical Industries

(Insecticide & Pesticides) 900/- 90* Technology of Modern Rice

Milling and Basmati Rice 600/- 60* Hand Book of Goat Farming 450/- 50* Floriculture Hand Book

(Flowers Growing Technology)1000/- 100* Aloe Vera Cultivation,

Processings, Formulations andManufacturing Technology 2500/-250

* Dairy Formulations, Processes &Milk Processing Industries 750/- 75

* Milk Processing and DairyProducts Industries 950/- 95

* Dairy Farming to Produce Milkwith Packaging 475/- 50

* Hand Book of Ice CreamTechnology and Formulae 750/- 75

* Hand Book of Milk Processing,Dairy Products and PackagingTechnology 1675/-165

* Dairy Farming for MilkProduction Technology 975/- 100

* Commercial Dairy Farmingwith Project Profiles 750/- 75

* Herbs, Medicinal & AromaticPlants Cultivation 650/- 65

* Aushidhi and SungndhitPaudho Ka Vaysayik (Hindi) 800/- 80

* Aromatic & Medicinal Plantsand Biodiesel (Jatropha) 1100/- 110

* Hand Book of Medicinal &Aromatic Plants 875/- 90

* Fruits & Vegetable ProcessingHand Book (2nd Edn.) 900/- 75

* Fruit Beverage & Processingwith Mango 750/- 75

* Food Processing & AgroBased Industries (2nd Edn.) 975/- 100

* Preservation & Canning ofFruits and Vegetables 1200/- 120

* Hand Book of FoodDehydration & Drying 1100/- 110

* Meat Processing & MeatProducts Hand Book 900/- 90

N Name of Books Rs. US$

AGRO CULTIVATION, ANIMALFARMING, AGRO PLANTATION &AGRO CHEMICAL/PESTICIDES/

FLORICULTURE/ALOEVERA

HERBS CULTIVATION/MEDICINES

FOOD & AGRO PROCESS, TOMATOPROCESSING, PRESERVATION,

DEHYDRATION, FRUIT BEVERAGE,POTATO, MAIZE, MEAT, BANANA

* Technology of FoodPreservation & Processing1250/-125

* Food Packaging Tech 900/- 90* Agro Based & Processed

Food Products 1100/- 110* Potato & Potato Process 750/- 75* Technology of Maize

& Allied Corn Products 650/- 65* Technology of Food

Processing Industries 975/- 100* Complete Book on Banana

Cultivation, DehydrationRipening, Processing,Products & Packaging Tech 975/- 100

* Agro Food Processingand Packaging Technology 1100/- 110

* Modern Tech. of TomatoProcessing/Dehydration 1100/- 110

* Technology of FoodChemicals, Pigments& Food Aroma Compd. 1100/- 110

* Modern Technology of AgroProcessing & Food PackagingProducts with ProjectProfiles 1100/- 110

* Technology of Chicken Meatand Poultry Products 1750/-175

* Poultry Farming, Hatchery &Broiler Production 975/- 100

* Fresh processed meat & coatedpoultry products withmanufacturing of dried meatemulsions and curing ofpoultry products 1100/- 110

* Poultry Farm/Feed Formulae 575/- 60

* Modern Technology of Wood,Veneer, Plywood, ParticleBoard, Fibreboard, Bamboo& Forest Products 1600/- 160

* Household Soap,ToiletSoap & Other Soap 750/- 75

* Soaps & Detergents 750/- 75* Synthetic Detergents 975/- 90* Acid Slurry, Surfactants, Soap

& Detergents/Formulae 850/- 85* Complete Tech Book on

Detergents with Formula 950/- 95* Manufacture of Washing

Soap, Toilet Soap, DetergentPowders, Liquid Soap & HerbalDetergents & Perfumes 1100/- 110

* Mfg Tech of Surfactants,Washing Powders, OpticalBrighteners &Chelating 1275 125

* Complete Tec. Book on Soaps,Detergents, Cleaners &Fragrance with Formulae 1100/ 110

POULTRY FARM, HATCHERY &CHICKEN MEAT TECHNOLOGY

WOOD, PLYWOOD, PARTICLE,BOARD, BAMBOO & FOREST

SOAP, DETERGENT & ACID SLURRY

COSMETICS TECHNOLOGY(SYNTHETIC & HERBAL)

* Cosmetics Processes &Formulations HandBook 1475/- 140

* Herbal Cosmetics & BeautyProducts withFormulations 950/- 95

* Profitable Small ScaleManufacture of Cosmetics 950/- 95

* Synthetic&Herbal Cosmetic 975/- 98* Tech of Herbal Cosmetics &

ToiletriesProducts/Formulae1100/-* Start Your Own Hair Shampoos

and Conditioners withManufacturing Processes 900/- 90

* Manufacturing Processes AndFormulations Of CleansingCreams, Baby Products, FacePowders.... 975/- 98

* Formulations & Mfg. Processesof Vanishing all Purpose.....900/- 90

* Hand Book of Oils, Fats andDerivatives with Refining &Packaging Technology 950/- 95

* Technology of OilseedsProcessing, Oils & Fatsand Refining 1400/- 140

* Essential Oils Manufacturing& Aromatic Plants 650/- 65

* Modern Technology ofEssential Oils 850/- 85

* Technology of Perfumes,Flavours & Essential Oils 1175/- 120

* Essential Oils Processes& Formulations 650/- 65

* Hand Book of Flavours &Food Colourants Technology1400/- 140

* H. B. of Perfume & Flavours975/-98* Hand Book of Perfumes

with Formulations (2nd Edn.) 900/- 75* Technology of Perfumes,

Flavours & Essential Oils 1175/- 120* Complete Technology Book on

Perfumes, Agarbatti, Dhoopbatti,Attar and other ProductsManufacturing & Formulationswith Project Profiles 950 95

* H.B. of Flavours Tech. 750/- 75* Manufacture Of Perfumes,

Fragrances, Scents, EssencesAnd Incense Sticks (Agarbatti)With Formulations 975/- 98

* Tech Of Solar Pv Panels,Energy,Cells, Lantern, Cooler, LightSystem, Photovoltaic System,Power Plant, Water Heater,Collector, Solar Cooling,Refrigeration, Solar Drying,Home System, Dish Engine &Other Solar Products Mfg.1250/- 125

OILSEEDS AND FATS

ESSENTIAL OILS & AROMATIC

PERFUMES AND FLAVOURS

SOLAR PV PANELS, ENERGY

DAIRY FARM, MILK PROCESSINGAND ICE CREAM


* Technology of Spices andSeasoning of Spices withFormulae 975/- 98

* Technology Of Spices (Masala)And Condiments With ProjectProfiles (Cultivation, Uses,Extrn, Composition etc) 1100/-110

* Spices &Packaging withFormula 900/- 90

* Start Your Own Cold Storage Unit 900/- 90

* Complete Tech. of NonwovensFabrics, CarryBags, Composite,Geotextiles, Medical Textiles,Fibres, Felts, Apparels, Spunlaceand Absorbent Nonwoven1175/- 120

* Tablets, capsules, Injectables,Dry Strups, Oral & ExternalPreparations, Eye, Ear ....1575/- 155

Topical...... 950/- 95

* Hand Book of Leather &Leather ProductsTechnology 850/-85

* Hand Book of Biotechnology900/-90

* H.B.of Ceramics & CeramicsProcessing Technology 1975/- 200

* Modern Tech Of Ceramic Products With Composition 1100/- 110

* Hand Book of Tree Farming 800/- 80

* Hand Book of MushroomCultivation, Processing& Packaging 550/- 55

* Biofertilizers & Vermiculture 900/-100

* Modern Technology ofBiodegradable Plastics andPolymers With Processes(Bio-Plastic, Starch Plastics,Cellulose Polymers & other) 975/- 100

* Production of BiodegradablePlastics & Bioplastics Tech 1500/-150

* Frozen Food Processing &Freeze Drying Technology 1000/- 100

* Frozen Food Products 900/- 90

* Hand Book of Organic Farmingand Organic Foods with Vermi-Composting & Neem Product 1100/-

110

* Hand Book of Fish Farmingand Fishery Products 650/- 65

* Textile Auxiliaries & Chemicalswith Processes/Formula 1050/- 105

* Tech of Textile Chemicalswith Formulations 1450/- 145

* Modern Technology of TextileAuxiliary and chemicalswith formulations 1100/- 110

* Textile Processing Chemicals,Enzymes, Dye Fixing Agentsand Other Finishes withProject Profiles 1275/- 125

* Manufacture of Disinfectants,Cleaners, Phenly, Repellents,Deodorants, DishwashingDetergents with Formulae 900/- 90

* Coffee & Coffee Processing525/- 53

* OnionCultivation, Dehydration,Flakes, Powder, Processing& Packaging Technology 975/- 98

* Hand Book of Minerals andMinerals Based Industries 975/- 100

* Rubber Chemicals &Processing Industries 400/- 40

* Modern Rubber Chemicals,Compounds & RubberGoods Technology 1500/- 150

* Technology of Rubber &Rubber Goods Industries 900/- 90

* Ayurvedic & HerbalMedicines with Formulaes 750/- 75

* Hand Book of AyurvedicMedicines with Formulations

900/- 90

* Modern Technology of NonFerrous Metals and MetalExtraction 1100/-110

* Processing Technology ofSteels and Stainless Steels 1900/-190

* Modern Technology ofRolling Mill, Billets, SteelWire, Galvanized Sheet,Forging & Castings 2500/-250

* Mfg Tech of Non-FerrousMetal Products 1750/- 175

* Modern Technology of FoodAdditives, Sweeteners andFood Emulsifiers 1575/- 156

* Technology of FoodChemicals, Pigments andFood Aroma Compounds 1100/- 110

* Technology of DisposableMedical Products 1750/-175

* Technology of Soya Milk, Tofu,Hydrolyzate, Allied SoyabeanProducts with project Profile 975/- 100

* Technology of SOYBEANProducts with Formulae 1100/- 100

* Technology of Products fromWastes (Industrial, Agriculture,Medical, Municipality, Organic& Biological) By Panda 900/- 90

* Products from WasteTechnology Hand Book 1100/- 110

* Technology of WineProduction and Packaging 1750/- 175

* Casting Technology H.Book750/- 75CASTING TECHNOLOGY

WINE PRODUCTION

SOLAR PV PANELS, ENERGY

* Technology of Building Materials& Chemicals with Processes950/- 95

* Mod. Tech. of Bleaching, Dyeing,Printing & Finishing of Textiles 750/- 75

* Technology of Textiles (Spinning& Weaving, Dyeing, Scouring,Drying, Printing and Bleaching) 900/- 90

* Garments Manufacturing Tech. 900/- 90

* Technology of Biscuits, Rusks,Crackers & Cookies withFormulations 975/- 98

* Hand Book of Confectionerywith Formulations 900/- 90

* Breakfast, Dietary Food, Pasta& Cereal Products Tech 1150/-120

* Modern Bakery Products 900/- 90* Modern Bakery Technology &

Fermented Cereal Productswith Formulae 1250/-125

* Confectionery,Chocolates, Toffee,Candy, Chewing & Bubble Gums,Lollipop & Jelly Products 1750/-175

* H.Book of Bakery Industries 950/-95

* Fibres With Manufacturing Processes & Properties With Project Profiles 975/- 100

BUILDING MATERIAL & CHEMICALS

TEXTILE, GARMENTS, DYEING...

PHARMACEUTICALS & DRUGS

NON WOVEN TECHNOLOGY

LEATHER &LEATHER PRODUCTS

TREE FARMING

SPICE, SEASONING, CONDIMENTS& COLD STORAGE

BIOTECHNOLOGY

CERAMICS & CERAMIC PROCESS

MUSHROOM PROCESSING

BIOFERTILIZERS & VERMICULTURE

BIODEGRADABLE PLASTICSAND POLYMERS

FROZEN FOOD/FREEZE DRYING

MINERAL AND MINERALS

RUBBER CHEMICALS,COMPOUNDS

& RUBBER INDUSTRIES

AYURVEDIC/HERBAL MEDICINES

STAINLESS STEEL, NON FERROUSMETALS, BILLETS & ROLLING MILL

FOOD ADDITIVES/CHEMICALS ANDSWEETENERS & FOOD EMULSIFIERS

DISPOSABLE MEDICAL PRODUCTS

SOYA MILK, TOFU & SOY PRODUCTS

PRODUCTS FROM WASTE

ORGANIC FARMING & FOOD/NEEM

FISH FARMING & FISHERY PRODUCTS

TEXTILE AUXILIARY & CHEMICALS

DISINFECTANTS, CLEANERS,PHENYL, DEODORANTS,

DISHWASHING DETERGENTS ETC.

COFFEE & COFFEE PROCESSING

ONION CULTIVATION/PROCESSING

* H.B.of Pulp & Paper, PaperBoard & Paper Based Tech. 1150/- 120

PULP & PAPER TECHNOLOGY

BAKERY, CONFECTIONERY,BISCUITS, COOKIES, BREAKFAST,

PASTA & CEREALS

TECHNOLOGY OF FIBRES

* Beer,Cereal Based Beverages, SoyBeverages, Fruit Wine, Vodka, TeaBeverages & Beverages 1100/- 110

* Mfg Tech Hand Book Of Gin, Rum, Whisky, Distillery Spirits, Brandy, Fruit Spirits, Flavours, Maturation & Blending With Other Alcoholic Beverage 1250/- 125

BEER, VODKA, BEVERAGE, WHISKY

FLOUR MILL (ATTA MAIDA, SUJI)

* Start Your Own Wheat Flour Mill(Atta, Maida, Suji, Bran& Besan) 900/- 90

HI-TECH · PDF filetoothpastes as a polishing agent and is a biomaterial. Dibasic calcium...

Documents

Transcript of HI-TECH · PDF filetoothpastes as a polishing agent and is a biomaterial. Dibasic calcium...