Hi-TECH 230

1

Hi-TECH 2308-10” Chucker Box Way TypeHorizontal Turning Center

Contents

Product Overview

Basic Information

Detailed Information

04

07

08

12

13

21

Basic Structure

Cutting Performance

Standard / Optional Accessories Status

Hwacheon Software

Diagram

Machine / NC Specifications

3

New Standard for 8-10” Lathe Faithful to the BasicsHi-TECH 230 provides more reliable machining performance based on

excellent machine rigidity and upgraded specifications compared to

the existing 8-10” lathes with box-way structure, and provides greatly

enhanced user convenience and maintainability. The Y-axis model has

Y-axis stroke of up to ±60 mm (±2.36 inch), the largest in class.

Upgrades for Enhanced Machining Performance

Easy Maintenance

Enhanced feed system rigidity for X and Y axes

Enhanced machine structure rigidity

Upgraded main spindle motor

The highest turnmill motor power in class

Extended max bar diameter

Possible to apply the 24 positions index turret

Coolant tank placed at the front and easy to remove

Coolant level sensor applied as standard

Use of external coolant block prevents the leakage of turret inside

1

Enhanced User Convenience

Lighter door to ease the operator's tiredness

Structure to prevent chip accumulation in

the door bottom

90˚ rotating operator panel

Optional software for user convenience

(Operating and machining)

2

1

4

2

3

1

4

2

5

3

6

3

Product Overview

4 HWACHEON CATALOG : Hi-TECH 230

The largest Y-axis stroke in its class

"Maximized Y-axis Machining Performance"

Type Chuck Sizeinch

Max Stroke mm (inch) Rapid Speed m/min (ipm)

X-axis Z-axis Y-axis X-axis Z-axis Y-axis

Hi-TECH 230A/AL/AXL 8

240 (9.45)460 (18.11)

L:700 (27.56)XL:1,200 (47.24)

±60 (±2.36) 30 (1,181) 30 (1,181) 10 (394)Hi-TECH 230B/BL/BXL10

Hi-TECH 230C/CL/CXL

Basic Structure

Y-axis Machining

Ø425 mm (Ø16.73 inch)

1,143 mm (45 inch)

Max Cutting Dia

Max Cutting Length

* Based on Hi-TECH 230AXL STD

Basic Information

"Increased Structural Rigidity of the Machine"via FEM Analysis

The cutting area and the feed zone are separated to

"Minimize Thermal Displacement of the Frame"caused by hot chips and coolant

"Slanted Bed Structure"for easy chip disposalX-axis

Z-axis

Y-axis

Ys-axis

Max Cutting Dia

Max Cutting Length "The Largest Cutting Area in its Class"

* Y-axis is YMC / YSMC Type Only.* L : Long Bed , XL : Extra Long Bed.

Finishing using Y-axis Multi-face machining

Milling at the position deviated from the center

Circular interpolation for X and Y axes

Y-axis

X + C -axis

X + Y-axis

Y-axis

X-axis

Y-axis

X-axis

Ys-axis

X-axisY-axis

Slanted Bed

Type Y-axis Stroke mm (inch)

Y-axis Rapid Speed m/min (ipm)

Inclination Angle (deg)

Slanted Bed X-axis X-Ys axis

Hi-TECH 230 SERIES Y(S)MC ±60 (±2.36) 10 (394) 30

5

Enhanced high-power motor

compared to existing 8-10” lathes

"Enhanced Cutting Performance and Productivity"

Type Max Spindle Speedrpm

Spindle MotorkW (HP)

Spindle TorqueNm

Max Bar Sizemm (inch)

Type of Spindle NoseASA

Hi-TECH 230A/AL/AXL 4,50018.5 / 15 (25 / 20)

330 Ø65 (Ø2.56) A2-6

Hi-TECH 230B/BL/BXL3,500

410Ø81 (Ø3.19) A2-8

Hi-TECH 230C/CL/CXL 22 / 18.5 (29 / 25) 703.5

Main Spindle

Tailstock

4,500 rpm

18.5 kW

Max Spindle Speed

Spindle Motor

* Based on Hi-TECH 230A

Minimized equipment installation space and placed the main spindle motor in a way to ensure easy application of the bar feeder

Application area of the bar feeder

Its digital tailstock (hydraulic) makes setting materials convenient and

implements fast cycle time as its setting time is shorter than that of a

conventional equipment

"Setting Time Reduced by 70% or More"

Type Max Stroke mm (inch)

Cylinder Diamm (inch)

Center TaperMT

Hi-TECH 230A/AL

460 (18.11)/ L:700 (27.56) Ø65 (Ø2.56) #5Hi-TECH 230B/BL

Hi-TECH 230C/CL

Type Max Stroke mm (inch)

Quill Strokemm (inch)

Cylinder Diamm (inch)

Center TaperMT

Hi-TECH 230AXL

1,080 (42.52) 120 (4.72) Ø100 (Ø3.94) #5Hi-TECH 230BXL

Hi-TECH 230CXL

* Comparison of tailstock setting times when the 200 mm (7.87 inch) material is used

Short Type / Long Type

The Quill is activated by foot pedal or program.

Tailstock body of standard machine can be positioned by operator.

Extra Long Type


Turret

Feed System

Type Number of Tool StationsTool Size

mm (inch)Turret Indexing Time

sec/stepMax Speed of Rotating Tool

rpmDisk Widthmm (inch)

STD 12

O.D:□25 (□1)

I.D:Ø40 (Ø1.5)0.344

-

100 (3.94)MC / YMC

SMC / YSMC12 (24 Positions Index) 5,000

Basic Information

4

3

Cu

rvic

1 2

Changed fixed point of X-axis ball screw to minimize

the machining error.

"Minimized Machining Error Caused by Thermal

Displacement"

The guide way contact area is increased by 40%.

"Reinforced Feed System Rigidity"

"Easy Precision Control Using GIB"

GIB Mounting area

Hi-TECH 230

Existing 8-10” lathes

Its external coolant block prevents leakage (cause of

failure) of turret inside from the source.

The largest turnmill motor in class : 5.5 / 3.7 kW

Extended turret disk width

- Standard model: The disk width extended by 25% compared

to the existing model

- MC model: BMT65 applied

Enhanced turret rigidity : The reduced distance between the disk and the curvic coupling decreases the moment imposed on

the curvic by 24%. Possible to apply 24 positions index turret

1

2

3

4

5

·Double O.D Holder ·Double I.D Holder

*The turret indexing time is the individual time based on 12 stations.

Machining direction

Fixed point of ball screw

77

Process Tap SizeCutting Speedm/min (ipm)

Feedmm/rev

Spindle Speed rpm

Tapping Depthmm (inch)

Axial(Z-axis) M16 30 (1,181) 2.0 597 25 (0.98)

O.D Cutting

Material Diamm (inch)

Cutting Speedm/min (ipm)

Feedmm/rev

Spindle Speedrpm

Cutting Depthmm (inch)

Material Removal Ratecm3/min

182 (7.17) 220 (8,661) 0.27 421 6 (0.24) 356.4

U-Drill

Turnmill Drill

Tool Diamm (inch)


Feedmm/rev

Spindle Speedrpm



55 (2.17) 120 (4,724) 0.18 694 50 (1.97) 297

Tool Diamm (inch)


Feedmm/rev

Spindle Speedrpm



20 (0.79) 30 (1,181) 0.1 478 30 (1.18) 15

Face Cutter

Tool Diamm (inch)


Feedmm/min

Spindle Speedrpm



63 (2.48) 198 (7,795) 300 1,000 4 (0.16) 75.6

Groove


Insert Widthmm (inch)

Feedmm/rev


150 (5,906) 5 (0.2) 0.25 187.5

I.D Cutting

Turnmill Tap

ProcessMaterial Diamm (inch)


Feedmm/rev

Spindle Speedrpm


Finishing 70.1 (2.76) 150 (5,906) 0.1 680 0.1 (0.004)

Roughing 72.5 (2.85) 100 (3,937) 0.34 428 1 (0.04)

Cutting Performance : Hi-TECH 230A

Existing 8-10” lathes

* The machining results above are examples based on the factory test standards, and are subjected to the changes in conditions.

Material : Carbon Steel (SM45C)


1

Main Chuck

8 inch S S S S S S S S S S S S S

2 10 inch X X X X X X X X X X X X X

3 No Chuck O O O O O O O O O O O O O

4Sub Chuck

6 inch X X X X X X S S X X X S S

5 No Chuck X X X X X X O O X X X O O

6Jaw

Soft Jaw S S S S S S S S S S S S S

7 Hard Jaw O O O O O O O O O O O O O

8

Chucking

Chucking Pressure Check Switch O O O O O O O O O O O O O

9 Dual Pressure (C-axis brake) X O O X O O O O X O O O O

10 Dual Pressure (Chuck) O O O O O O O O O O O O O

11 Chuck Pressure Compensation O O O O O O O O O O O O O

12 Chuck Clamp / Unclamp Switch O O O O O O O O O O O O O

13

Turret

Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X

14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S

15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S

16 Axial Driven Holder (BMT65) X O O X O O O O X O O O O

17 Radial Driven Holder (BMT65) X O O X O O O O X O O O O

18 U-Drill Holder Cap S S S S S S S S S S S S S

19 Double O.D Holder (for 24 Positions, 20X20) (Main / Sub) X O O X O O O O X O O O O

20 Double O.D Holder (for 24 Positions, 25X25) (Main & Sub) X X X X X X S S X X X S S

21 Double I.D Holder (for 24 Positions, Ø25) X O O X O O O O X O O O O

22 Double I.D Holder (for 24 Positions, Ø32) X X X X X X S S X X X S S

23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) O X X O X X X X O X X X X

24 VDI 40 Turnmil (12 Station turret with 12 positions) X O O X O O O O X O O O O

25 VDI 40 O.D Holder O O O O O O O O O O O O O

26 VDI 40 I.D Holder O O O O O O O O O O O O O

27 VDI 40 Face Holder O O O O O O O O O O O O O

28 Axial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O

29 Radial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O

30 U-Drill Holder (for VDI 40) O O O O O O O O O O O O O

31

Tailstock

Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X

32 Servo Tailstock (use Servo Motor & Ball Screw) O O O O O O X X O O O X X

33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X

34 Steady RestBase for Steady Rest *Selecting both the Steady rest base and part catcher to be installed is not possible.

X X X X X X X X O O O X X

35Coolant Pump

0.05 MPa S S S S S S S S S S S S S

360.6 / 1.5 / 3 / 7 MPa*For 7 MPa, only water soluble coolants are available

O O O O O O O O O O O O O

37

Coolant Options

Coolant Gun O O O O O O O O O O O O O

38 Coolant Blow O O O O O O O O O O O O O

39 Coolant Level Sensor S S S S S S S S S S S S S

40 Coolant Chiller O O O O O O O O O O O O O

41 Oil Skimmer O O O O O O O O O O O O O

42 Large Capacity Coolant Tank O O O O O O O O O O O O O

43

Chip Disposal

Air Blower O O O O O O S S O O O S S

44 Side / Back Type Chip Conveyor (Hinge / Scraper Type)*Back type can be used only in short type


45 Mist Collector (Interface) O O O O O O O O O O O O O

46

Automation

Tool Presetter (Manual / Automation) O O O O O O O O O O O O O

47 Parts Catcher (Main) O O O O O O O O O O O O O

48 Parts Catcher (Sub) *Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.

X X X X X X X O X X X X X

49 Workpiece Air Ejector & Through Coolant (for Sub Spindle) X X X X X X O O X X X O O

50 Barfeeder Interface O O O O O O O O O O O O O

51 Auto Door O O O O O O O O O O O O O

52 Part Conveyor O O O O O O O O O O O O O

53 Robot Interface O O O O O O O O O O O O O

54 Tool & Work Counter (Internal / External) O O O O O O O O O O O O O

55

Software

Tool Load Detect (L-HTLD) S S S S S S S S S S S S S

56 Arbitrary Speed Threading O O O O O O O O O O O O O

57 Tool Life Management S S S S S S S S S S S S S

58 Automatic Tool Offset (Tool Presetter option is required) S S S S S S S S S S S S S

59 Lathe Calculator Function (L-CAL) S S S S S S S S S S S S S

60 Work / Tool Management (L-COUNT) S S S S S S S S S S S S S

61 Workpiece Clamp of Chuck (L-WCMP) O O O O O O O O O O O O O

62 Monitoring Solution of Real-time Operational Status (M-VISION Pro) O O O O O O O O O O O O O

63 Hwacheon Lathe Vibration Control System (HLVC) S S S S S S S S S S S S S

64 M-Code & G-Code List Help S S S S S S S S S S S S S

65

ETC

Linear Scale (X / Z) O O O O O O O O O O O O O

66 NC Cooler O O O O O O O O O O O O O

67 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S

68 Transformer O O O O O O O O O O O O O

69 Manual Guide i S S S S S S S S S S S S S

70 15” Non touch display S S S S S S S S S S S S S

71 15” Touch type display O O O O O O O O O O O O O

NO. Item DescriptionHi-TECH 230A Hi-TECH 230AL Hi-TECH 230AXL

STD MC YMC STD MC YMC SMC YSMC STD MC YMC SMC YSMC

Detailed InformationStandard / Optional Accessories Status S : Standard O : Option X : Not available

9

1

Main Chuck

8 inch X X X X X X X X X X X X X

2 10 inch S S S S S S S S S S S S S

3 No Chuck O O O O O O O O O O O O O

4Sub Chuck

6 inch X X X X X X S S X X X S S

5 No Chuck X X X X X X O O X X X O O

6Jaw

Soft Jaw S S S S S S S S S S S S S

7 Hard Jaw O O O O O O O O O O O O O

8

Chucking

Chucking Pressure Check Switch O O O O O O O O O O O O O

9 Dual Pressure (C-axis brake) X O O X O O O O X O O O O

10 Dual Pressure (Chuck) O O O O O O O O O O O O O

11 Chuck Pressure Compensation O O O O O O O O O O O O O

12 Chuck Clamp / Unclamp Switch O O O O O O O O O O O O O

13

Turret

Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X

14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S

15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S

16 Axial Driven Holder (BMT65) X S S X S S S S X S S S S

17 Radial Driven Holder (BMT65) X S S X S S S S X S S S S

18 U-Drill Holder Cap S S S S S S S S S S S S S

19 Double O.D Holder (for 24 Positions, 20X20) (Main / Sub) X O O X O O O O X O O O O

20 Double O.D Holder (for 24 Positions, 25X25) (Main & Sub) X X X X X X S S X X X S S

21 Double I.D Holder (for 24 Positions, Ø25) X O O X O O O O X O O O O

22 Double I.D Holder (for 24 Positions, Ø32) X X X X X X S S X X X S S

23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) O X X O X X X X O X X X X

24 VDI 40 Turnmil (12 Station turret with 12 positions) X O O X O O O O X O O O O

25 VDI 40 O.D Holder O O O O O O O O O O O O O

26 VDI 40 I.D Holder O O O O O O O O O O O O O

27 VDI 40 Face Holder O O O O O O O O O O O O O

28 Axial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O

29 Radial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O

30 U-Drill Holder (for VDI 40) O O O O O O O O O O O O O

31

Tailstock

Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X

32 Servo Tailstock (use Servo Motor & Ball Screw) O O O O O O X X O O O X X

33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X

34 Steady RestBase for Steady Rest *Selecting both the Steady rest base and part catcher to be installed is not possible.

X X X X X X X X O O O X X

35Coolant Pump

0.05 MPa S S S S S S S S S S S S S

360.6 / 1.5 / 3 / 7 MPa*For 7 MPa, only water soluble coolants are available


37

Coolant Options

Coolant Gun O O O O O O O O O O O O O

38 Coolant Blow O O O O O O O O O O O O O

39 Coolant Level Sensor S S S S S S S S S S S S S

40 Coolant Chiller O O O O O O O O O O O O O

41 Oil Skimmer O O O O O O O O O O O O O

42 Large Capacity Coolant Tank O O O O O O O O O O O O O

43

Chip Disposal

Air Blower O O O O O O S S O O O S S

44 Side / Back Type Chip Conveyor (Hinge / Scraper Type)*Back type can be used only in short type


45 Mist Collector (Interface) O O O O O O O O O O O O O

46

Automation

Tool Presetter (Manual / Automation) O O O O O O O O O O O O O

47 Parts Catcher (Main) O O O O O O O O O O O O O

48 Parts Catcher (Sub) *Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.

X X X X X X X O X X X X X

49 Workpiece Air Ejector & Through Coolant (for Sub Spindle) X X X X X X O O X X X O O

50 Barfeeder Interface O O O O O O O O O O O O O

51 Auto Door O O O O O O O O O O O O O

52 Part Conveyor O O O O O O O O O O O O O

53 Robot Interface O O O O O O O O O O O O O

54 Tool & Work Counter (Internal / External) O O O O O O O O O O O O O

55

Software

Tool Load Detect (L-HTLD) S S S S S S S S S S S S S

56 Arbitrary Speed Threading O O O O O O O O O O O O O

57 Tool Life Management S S S S S S S S S S S S S

58 Automatic Tool Offset (Tool Presetter option is required) S S S S S S S S S S S S S

59 Lathe Calculator Function (L-CAL) S S S S S S S S S S S S S

60 Work / Tool Management (L-COUNT) S S S S S S S S S S S S S

61 Workpiece Clamp of Chuck (L-WCMP) O O O O O O O O O O O O O

62 Monitoring Solution of Real-time Operational Status (M-VISION Pro) O O O O O O O O O O O O O

63 Hwacheon Lathe Vibration Control System (HLVC) S S S S S S S S S S S S S

64 M-Code & G-Code List Help S S S S S S S S S S S S S

65

ETC

Linear Scale (X / Z) O O O O O O O O O O O O O

66 NC Cooler O O O O O O O O O O O O O

67 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S

68 Transformer O O O O O O O O O O O O O

69 Manual Guide i S S S S S S S S S S S S S

70 15” Non touch display S S S S S S S S S S S S S

71 15” Touch type display O O O O O O O O O O O O O

NO. Item DescriptionHi-TECH 230B/C Hi-TECH 230BL/CL Hi-TECH 230BXL/CXL

STD MC YMC STD MC YMC SMC YSMC STD MC YMC SMC YSMC

S : Standard O : Option X : Not available

9

Coolant Pump

Coolant LevelSensor

1st Mesh Chip Filter

2nd Mesh Chip Filter

3rd Mesh Chip Filter



Tool Presetter (OPT) Available functions with automatic tool presetter

- With a simple touch on the sensor, it perfectly sets the coordinate

system (within 15 seconds per tool).

- The tool shape error value is automatically calculated and entered.

- The automatic coordinate system is promptly configured

according to the material geometry.

Parts Catcher - Main / Sub (OPT)The bucket type is designed with connected

linkage applicable to a variety of part shapes.

The bucket catches and carries parts into the

collection box.

Automatic Coolant System (STD)

External Coolant TankA coolant tank is placed at the front of the machine for easy

coolant exchange as well as easy tank cleaning and pump

maintenance. Particularly, it is possible to separate the tank

only without removing the chip conveyor for easy tank

cleaning.

Mesh Chip Filter A 3-layered mesh chip filter, which is able to sort from long

chips to micro chips, extends the service life of the coolant

pump.

Various Options- Standard Coolant Pump : 0.05 MPa

- Optional Coolant Pump

→ 0.6 / 1.5 / 3 / 7 MPa

*For 7 MPa, only water soluble coolants are available

- Oil Skimmer (OPT)

- Lift-up Chip Conveyor : Hinge / Scraper Type (OPT)

- Max machinable workpiece size

→ Ø81 x 160 mm (Ø3.19 x 6.3 inch)

Tank Capacity

Power0.4 kW (for Turret)

* Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.

* Sub Spindle Part catcher can be used only in LYSMC* Selecting both the Steady rest base and part catcher to be installed is not possible.

UnitShort Type Long Type XL Type

STD / MC YMC STD / (S)MC Y(S)MC STD / (S)MC Y(S)MC

STD ℓ(gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)

Large (OPT) ℓ(gal) 200 (52.83) 210 (55.48) 210 (55.48) 225 (59.44) 235 (62.08) 250 (66.04)

11

The operator panel is newly

designed from the operator's

viewpoint and thus enhances

the operator's convenience

"User Friendly Design"

Convenient Operator Panel

15” display as standard (Non-touch Type Display)

QWER Key MDI

Part Program Storage Length : 2MB

Number of Register Able Programs : Max 1,000ea

Enhanced operability by optimizing the layout and

improving the touch feeling of control buttons.

Long time continuous DNC operation with

the CF card even without the data server.

90˚ Rotating Operator Panel (STD)

"Enhanced Productivity"

EnhancedProductivity

Reduced Non-cutting Time

Optimized Tuning

HRV3+

Machine Optimization (STD)

The cycle machining as well as the operating time and the acceleration / deceleration speed of feed system are optimized.

Dramatically reduced non-cutting time during machining ensures optimal productivity.

High precision, speed and smoothness are realized using the cutting-edge machining technology.

Machining surface quality enhanced by HRV3+ control.(HRV3+: effectively prevents machine oscillation by controlling the servo current to enhance the machining surface quality.)

12 HWACHEON CATALOG : HI-TECH230


Hwacheon Software

It monitors the load

factors of spindles and

each axis during lathe

(turnmill) machining and

provides the following

benefits to customers

You can monitor the daily / total production quantity and tool usages.

You can enter values required for machining directly from the

display control panel for an easy calculation without a calculator

To complement the drawback of the proximity switch of which

the position should be adjusted according to the material

diameter, the analog sensor (0-10V) is used to set the distances

of the open and close zones from the operating screen for

enhanced user convenience.

(However, it is necessary to discuss with factory in advance

whether it is possible to mount the analog sensor.)

1. Tool life management

Feed axis

Turnmill

Main / Sub Spindle

2. Optimized process

3. Able to quickly respond to wear and damage of tools

The number of optimal

main spindle speed

The cutting speed

Material removal rate (MRR)

The cutting time View the chuck open / close state

Change the driving condition

according to the chuck type

(inner and outer diameters)

Set the chuck open / close zone

An alarm is generated if the

chuck function fails

- Generates an alarm for excessive insert wear (overload)

- Able to control individual machining conditions per insert wear

- Generates a replacement alarm in the event of an insert damage

L-HTLDLathe Hwacheon ToolLoad Detect system

L-CALLathe Calculator Function

L-COUNTLathe Work / Tool

Counter Management

L-WCMPLathe WorkpieceClamp of Chuck

Reset the current tool counter (NOW)

Reset the total number of machining parts

Reset the number of machining parts

The number ofmachining parts

Tool Count Management : 25 tools

- TOOL replacement forecast through message (ADVANCE)

- Tool replacement notification through alarm (PRESET)

- Display current tool counter status (STAT)

- Counter number display (COUNTER)

- Select tool number (TOOL)

- Display current tool counter (CURRENT)

Lathe Hwacheon Tool Load Detect System (STD)

Work / Tool Counter

Management (STD)

Workpiece Clamp of Chuck

(OPT)Lathe Calculator Function (STD)

L-HTLDLathe Hwacheon ToolLoad Detect system

L-CALLathe Calculator Function

L-COUNTLathe Work / Tool

Counter Management

L-WCMPLathe WorkpieceClamp of Chuck

The number of required parts

(entered by the user)

Total number ofmachining parts

Select Work Counter

Front

1,49

0 (5

8.66

) [ Y

: 1

,652

(65.

04)]

Hei

gh

t - 1

,800

(70.

87) [

Y :

2,1

04 (8

2.83

)]

1,20

0 (4

7.24

)

Side

1,02

5 (4

0.35

) [ Y

: 1

,155

(45.

47)]

70 (2.76)

Handle ~ Door

(Spindle Center)

455.5 (17.93)[ Y : 442.5 (17.42)]

Top

Wid

th -

1,84

9.5

(72.

81) [

Y :

1,9

24.5

(75.

77)]

1,165 (45.87)

385(

15.1

6)51

0.5

(20.

1)

90˚ Rotating

Length : 230A/B S : 2,893 (113.9) / L : 3,133 (123.35) / XL : 3,753 (147.76) 230C S : 2,993 (117.83) / L : 3,233 (127.28) / XL : 3,853 (151.69)

S LLS

Y

Y

Y

Y

Y

230A/B : 198 (7.8)230C : 298 (11.73)

428 (16.85) Added Cover : SMC type only Added Cover : SMC type only900 (35.43)

Hei

gh

t - S

MC

: 1

,934

.5 (7

6.16

)

Large Capacity Coolant Tank (OPT)

400(15.75)

13

Machine Size Y-axis

* Unit : mm (inch)

YShort Type Long Type Extra Long TypeS L XL

S : 2,695 (106.1) / L : 2,935 (115.55) / XL : 3,555 (139.96)S L XL

XLXL

Large Capacity Coolant Tank (OPT) - Length : 230A/B S : 3,293 (129.65) / L : 3,533 (139.09) / XL : 4,153 (163.5) 230C S : 3,393 (133.58) / L : 3,633 (143.03) / XL : 4,253 (167.44)

S LLS

XLXL



Spindle Power – Torque Diagram

3,500 rpm (Hi-TECH 230B)

Max Power : 18.5 kW (25 HP) / Max Torque : 410 Nm

4,500 rpm (Hi-TECH 230A)

5,000 rpm (Sub Spindle)

Max Power : 18.5 kW (25 HP) / Max Torque : 330 Nm

Max Power : 7.5kW (10 HP) / Max Torque : 86 Nm

1000535

714 2142

2000 3000 4000 4500

Torq

ue

(Nm

)

400

100

200

300

0 0

10

20

0

Pow

er (

kW)

Spindle Speed (rpm)

18.5 kW (15 min, 25%)

15 kW (Cont.)

15 kW (60 min, 40%)

267.9 Nm(60 min, 40%)

200.7 Nm (Cont.)

330 Nm(15 min, 25%)

8.36.7

575 1724To

rqu

e (N

m)

400

100

200

300

0 0

10

20

0 1000431 2000 3000 3500

Pow

er (

kW)

Spindle Speed (rpm)

18.5 kW (15 min, 25%)

15 kW (Cont.)

15 kW (60 min, 40%)

332.5 Nm(60 min, 40%)

249.4 Nm (Cont.)

410 Nm (15 min, 25%)

8.9

7.3

1000

1111833 2500

2000 3000 4000 5000

Torq

ue

(Nm

)

20

40

80

60

0 00

Pow

er (

kW)

Spindle Speed (rpm)

7.5 kW (15 min, 25%)

5.5 kW (Cont.)

5.5 kW (60 min, 40%)

63.1 Nm(60 min, 40%)

47.3 Nm (Cont.)

86 Nm (15 min, 25%)

4

6

8

2

5.9

5,000 rpm (Turnmill)

Max Power : 5.5 kW (7.4 HP) / Max Torque : 52.5 Nm

Torq

ue

(Nm

)

10

20

30

40

50

60

0 0

2

4

6

0 1000 2000 3000 4000 5000Po

wer

(kW

)

Spindle Speed (rpm)

5.5 kW (15 min, 25%)

3.7 kW (Cont.)

3.7 kW (60 min, 40%)

35.4 Nm(60 min, 40%)

26.6 Nm (Cont.)

52.5 Nm (15 min, 25%)

4.78

3.2

1333

3,500 rpm (Hi-TECH 230C)

Max Power : 22 kW (29 HP) / Max Torque : 703.5 Nm

749298.5

2574

Torq

ue

(Nm

)

800

200

400

600

0 0

10

30

20

0 1000500

429 1119

2000 3000 3500

Pow

er (

kW)

Spindle Speed (rpm)

High:22 kW (30 min, 60%)

High:18.5 kW (Cont.)

Low:22 kW (15 min, 15%)

Low:13 kW (Cont.)

High:489.3 Nm (30 min, 60%)

Low:416.1 Nm (Cont.)

High:411.9 Nm (Cont.)

Low:703.5 Nm (15 min, 15%)

16.65

13.88

2500

High Speed (0~3500 rpm)Low Speed (0~1119 rpm)

Electric Conversion 429rpm

5,000 rpm (Sub Spindle) (OPT)

Max Power : 11kW (15 HP) / Max Torque : 126 Nm

1000

1111833 2500

2000 3000 4000 5000

Torq

ue

(Nm

)

20

40

80

100

120

140

60

0 00

Pow

er (

kW)

Spindle Speed (rpm)

11 kW (15 min, 25%)

7.5 kW (Cont.)

7.5 kW (60 min, 40%)

86 Nm(60 min, 40%)

64.5 Nm (Cont.)

126 Nm (15 min, 25%)

4

8

6

12

10

14

2

5.72

3.9

1515

Tool Part name Q'ty Shape

Tool Part name Q'ty Shape

* Unit : ea

* Unit : ea

Axial Turnmill Holder (OPT)

Radial Turnmill Holder (OPT)

[BMT65]

Tooling Diagram

Hi-TECH 230 (Y)MC / (Y)SMC

Hi-TECH 230 STD

▒ Common ▒ (Y)MC ▒ (Y)SMC

(Offset)A

[72 mm (2.83 inch)][YSMC : 72 mm (2.83 inch)

& 95 mm (3.74inch)]

A

95 m

m (3

.74

inch

)

□25 mm (□1 inch)

Block230A, B : 6 Set

230C : 5 Set

Extended O.D Cutting Holder230A, B : 0

230C : 1

Face Holder 1

Ø40 mm (Ø1.5 inch)

I.D Holder 4

Sleeve (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) 1 Set

U-Drill Holder 1

U-Drill Sleeve (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) Each OPT

Socket (MT#1), (MT#2), (MT#3) 1 Set

□25 mm (□1 inch)

O.D Cutting Holder4

2

Sub O.D Cutting Holder 1

Face Holder 1

Extended O.D Cutting Holder230A, B : 0

230C : 1

Double O.D Cutting Holder 1

□20 mm ( □ 0.75 inch)

Double O.D Cutting Holder OPT (Main / Sub)


I.D Holder2

1

Sleeve (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) 1 Set


Double I.D Holder 1

Sleeve (Ø6, 1/4”), (Ø8, 5/16”),(Ø10, 3/8”), (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”)

Each OPT

Ø25 mm (Ø1 inch)

Double I.D Holder OPT

Sleeve (Ø6, 1/4”), (Ø8, 5/16”),(Ø10, 3/8”), (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”)

Each OPT

U-Drill Holder 1

U-Drill Sleeve (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) Each OPT

Socket (MT#1), (MT#2), (MT#3) 1 Set

ER 32 : Ø3,4,5,6,7,8,9,10,11,12, 13, 14,15, 16, 17, 18, 19, 20ER 32I : Ø1/8”,Ø3/16”, Ø1/4”, Ø5/16”,Ø3/8”,Ø7/16”, Ø1/2",Ø11/16” 1 Set

Cap 12



Turret Interference Diagram

210 (8.27)35 (1.38)

X-axis Stroke 240 (9.45)

457.5 (18.01)

27.5 (1.08)212.5 (8.37)

Ø255.4 (Ø10.06)

Ø40 (Ø1.57)

Extended OD Holder

(Only C Type)Ø49

0 (Ø

19.2

9)

Ø55

0.46

9 (Ø

21.6

7)

Ø58

9.11

2 (Ø

23.1

9)

Max Cutting Dia. Ø425 (Ø16.73)ST

D Cutti

ng Dia

. Ø21

3.6

(Ø8.

41)

182.5 (7.19)

40 (1.57)

200 (7.87) 40 (1.57)

Max Cutting Dia. Ø

400 (Ø15.75)

STD C

uttin

g Dia

. Ø22

1 (Ø

8.7)

Ø490 (Ø

19.29)

Ø509 (Ø

20.04)

Ø515 (Ø20.28)

Ø605 (Ø23.82)

Ø608 (Ø23.94)

Extended OD Holder

(Only C Type)

Ø40 (Ø1.57)

35 (1.38)


457.5 (18.01)

Ø264 (Ø

10.39)

Ø20

(Ø0.

79)

60(2.36)

254.5 (10.02)

99.1 (3.9)

66.9 (2.63) +60

(2.

36)

-60

(2.3

6)

120

(4.7

2)

203 (7.99) 37 (1.46)


457.5 (18.01)

Hi-TECH 230A / B / C STD

Hi-TECH 230A / B / C SMC Hi-TECH 230A / B / C YSMC

Hi-TECH 230A / B / C (Y)MC

Hi-TECH 230A / B / C Y-axis Moving Range Hi-TECH 230A / B / C Y-axis Moving Range (Sub Spindle)

* Unit : mm (inch)

457.5 (18.01)

257.5 (10.14)

182.5 (7.19)40

(1.57)

35 (1.38)

200 (7.87) 40 (1.57)


Max Cutting Dia Ø400 (Ø15.75)

Max Cutting Dia

Ø280 (Ø11.02)

(Sub Spindle)

STD Cutting Dia Ø226 (Ø

8.9)

Ø40 (Ø1.57)

Ø635 (Ø25)

Ø619 (Ø

24.37)Ø503 (Ø19.8)

Ø597 (Ø23.5)

Ø32

(Ø

1.26

)

Ø20 (Ø0.79)

60(2

.36)

Ø509 (Ø20.04)Ø515 (Ø20.28)Ø277 (Ø

10.91)

457.5 (18.01)

257.5 (10.14)

182.5 (7.19)40

(1.57)

35 (1.38)

200 (7.87) 40 (1.57)


Max Cutting Dia Ø400 (Ø15.75)

STD Cutting Dia Ø226 (Ø

8.9)

Ø40 (Ø1.57)

Ø635 (Ø25)

Ø619 (Ø

24.37)Ø503 (Ø19.8)

Ø597 (Ø23.5)

Ø32

(Ø

1.26

)

Ø20 (Ø0.79)

60(2

.36)

Ø509 (Ø20.04)Ø515 (Ø20.28)Ø277 (Ø

10.91)

Max Cutting Dia

Ø280 (Ø11.02)

(Sub Spindle)

72(2.83)182.5 (7.19)

-60

(2.3

6)+

60 (

2.36

)

120

(4.7

2)

43.9 (1.73)

34.6

(1.

36)

180 (7.09)60

(2.36)

76.1 (3) 15 (0.59)


457.5 (18.01)

Interference Areawith Sub Spindle

Moving Range

Hi-TECH 230A(L) / B(L) / C(L) STD O.D Hi-TECH 230A(L) / B(L) / C(L) STD I.D

Hi-TECH 230A(L) / B(L) / C(L) MC O.D Hi-TECH 230A(L) / B(L) / C(L) MC I.D

Hi-TECH 230A(L) / B(L) / C(L) MC Axial Hi-TECH 230A(L) / B(L) / C(L) MC Radial

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type Max Cutting Length 403 (15.87) [L : 643 (25.31)]

B/C-Type Max Cutting Length 379 (14.92) [L : 619 (24.37)]

Tailstock Stroke 460 (18.11) [L : 700 (27.56)]

52(2.05)

X-a

xis

Stro

ke 2

40 (

9.45

)

25 (

0.98

)

2.5

(0.1

)27

.5(1

.08)

212.

5 (8

.37)

50(1.97) 5

(0.2

)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 405 (15.94) [L : 645 (25.39)]

B/C-Type : 381 (15) [L : 621 (24.45)]

X-a

xis

Stro

ke 2

40 (

9.45

)


90 (

3.54

)

67.5

(2.

66)

212.

5 (8

.37)

52(2.05)27

.5(1

.08) 50

(1.97) 5 (0

.2)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]




60(2.36)

X-a

xis

Stro

ke 2

40 (

9.45

)

200

(7.8

7)

42(1.65)

4.5

(0.1

8)25

.5 (

1)

10 (

0.39

) 8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 390 (15.35) [L : 630 (24.8)]

B/C-Type : 366 (14.41) [L : 606(23.86)]

X-a

xis

Stro

ke 2

40 (

9.45

)


5 (.

2)77

.5 (

3.05

)

42(1.65)

60(2.36)

55 (

2.17

)27

.6(1

.09)

212.

5 (8

.37)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 450 (17.72) [L : 690 (27.17)]

B/C-Type : 426 (16.77) [L : 666 (26.22)]


60(2.36)

X-a

xis

Stro

ke 2

40 (

9.45

)

208

(8.1

9)

40(1.57)5

(0.2

)35

(1.

38)

8 (0

.31) 8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 351 (13.82) [L : 591 (23.27)]

B/C-Type : 327 (12.87) [L : 567 (22.32)]

X-a

xis

Stro

ke 2

40 (

9.45

)


53(2

.09)

30 (

1.18

)

30 (1.18)25 (0.98)

83 (

3.27

)

32 (

1.26

)

203

(7.9

9)

5 (0

.2)

46(1.81)

17

* Unit : mm (inch)

Moving Range * Unit : mm (inch)



Hi-TECH 230AL / BL / CL SMC O.D

Hi-TECH 230AL / BL / CL SMC Radial

Hi-TECH 230AL / BL / CL SMC Radial (Sub) - Offset

Hi-TECH 230AL / BL / CL SMC O.D (Sub) Hi-TECH 230AL / BL / CL SMC I.D (Sub)

Hi-TECH 230AL / BL / CL SMC I.D

Hi-TECH 230AL / BL / CL SMC Axial

Hi-TECH 230AL / BL / CL SMC Axial (Sub)

8" Chuck

10" Chuck

6" Chuck

Z-axis Stroke 700 (27.56)

A-Type Max Cutting Length 584 (22.99)

B/C-Type Max Cutting Length 560 (22.05)

B/C-Type Sub Spindle Stroke 640 (25.2)

A-Type Sub Spindle Stroke 665 (26.18)10 (0.39)

9 (0.35)

85 (3.35)168 (6.61)14

2 (5

.6)

58 (

2.28

)

18.5

(0.

73)

X-a

xis

Stro

ke 2

40 (

9.45

)

259 (10.2)

21.5

(0.

85)

8" Chuck

10" Chuck

6" Chuck


630 (24.8)

606 (23.86)



9 (0.35)

41(1.61)

167 (6.57)259 (10.2)

75.5

(2.9

7)88

(3.4

6)

37 (

1.46

)

22 (

0.87

)18

(0.

71)

X-a

xis

Stro

ke 2

40 (

9.45

)

45(1.77)

8" Chuck

10" Chuck

6" Chuck


690 (27.17)

666 (26.22)



50(1.97)

35(1.38)

168 (6.61)

115

(4.5

3)35

(1.

38)

50(1

.97)

8 (0

.31)

X-a

xis

Stro

ke 2

40 (

9.45

)

259 (10.2)

14 (

0.55

)18 (0

.71)

10 (0.39)

8" Chuck

10" Chuck

6" Chuck


591 (23.27)

567 (22.32)



85 (3.35)168 (6.61)259 (10.2)

70 (

2.76

)13

0 (5

.12)

3 (0

.12)

19 (

0.75

)18 (0

.71)X

-axi

s St

roke

240

(9.

45)

10 (0.39)

8" Chuck

10" Chuck

6" Chuck


A-Type Max Cutting Length 591 (23.27)

B/C-Type Max Cutting Length 566 (22.28)



144 (5.67)259 (10.2)101(3.98)

22 (

0.87

)

18(0

.71)

X-a

xis

Stro

ke 2

40 (

9.45

)

22(0.87)

60(2.36)

5(0.2)

200

(7.8

7)

82 (

3.23

)

25(0

.98)

41(1

.61)

65(2

.56)

87(3

.43)

47(1

.85)

76 (2.99)22 (0.87)60

(2.36)

60 (

2.36

)

5 (0.2)

63(2

.48)

65(2

.56)

87(3

.43)

10 (0.39)

8" Chuck

10" Chuck

6" Chuck




46(1.81)

168 (6.61)259 (10.2)

76(2

.99)

82 (

3.23

)

22 (

0.87

)18 (0

.71)X

-axi

s St

roke

240

(9.

45)

39 (1.54)

Max 65 (2.56)

58(2

.28)

142

(5.5

9)40

(1.

57)

8(0.31)

99(3.9)

71 (2.8)

12(0.47)

60(2

.36)

146

(5.7

5)34

(1.3

4)

43(1

.69)

10 (0.39)

8" Chuck

10" Chuck

6" Chuck




50 1.97)35(1.38)

168 (6.61)

115

(4.5

3)35

(1.

38)

18 (0.7

1)X-a

xis

Stro

ke 2

40 (

9.45

)

8 (0

.31)

259 (10.2)

89(3.5)

22(0.87)

105(4.13)

18(0.71)

72(2

.83)

120

(4.7

2)

95(3

.74)

120

(4.7

2)

14 (

0.55

)

50(1

.97)

10 (0.39)9 (0.35)

Max 65 (2.56)

5(0.2)

14.5(0.57)

8" Chuck

10" Chuck

6" Chuck



A-Type Sub Spindle Stroke 665 (26.18)

61 (2.4)187.5 (7.38)264 (10.39)

50(1

.97)

60(2

.36)

30 (

1.18

)

22

(0.8

7)

X-a

xis

Stro

ke 2

40 (

9.45

)

70(2

.76)

20(0

.79)

210

(8.2

7)

60 (2.36)83 (3.27)

18(0

.71)

95(3

.74)

10 (0.39)


Hi-TECH 230AL / BL / CL YSMC O.D

Hi-TECH 230A(L) / B(L) / C(L) YMC O.D Hi-TECH 230A(L) / B(L) / C(L) YMC I.D

Hi-TECH 230A(L) / B(L) / C(L) YMC Axial Hi-TECH 230A(L) / B(L) / C(L) YMC Radial

Hi-TECH 230AL / BL / CL YSMC Axial

Hi-TECH 230AL / BL / CL YSMC I.D

Hi-TECH 230AL / BL / CL YSMC Radial

X-a

xis

Stro

ke 2

40 (

9.45

)


B/C-Type : Max Cutting Length 560 (22.05)

B/C-Type : Sub Spindle Stroke 640 (25.2)

A-Type : Sub Spindle Stroke 665 (26.18)

A-Type : Max Cutting Length 584 (22.99)

8" Chuck

10" Chuck

6" Chuck

10 (0.39)

9 (0.35)

85 (3.35)168 (6.61)

142

(5.5

9)53

(2

.09)

32(1

.26)

259 (10.2)

5 (0

.2)

8 (0.3

1)

606 (23.86)

630 (24.8)

8" Chuck

10" Chuck

6" Chuck

41(1.61)

167 (6.57)259 (10.2)

65.5

(2.5

8)98

(3.8

6)

45(1.77)




10 (0.39)

9 (0.35)

X-a

xis

Stro

ke 2

40 (

9.45

)

5 (0

.2)

13 (

0.51

)32

(1.2

6)

32(1

.26)

666 (26.22)

690 (27.17)

8" Chuck

10" Chuck

6" Chuck

50(1.97)

35(1.38)

168 (6.61)

115

(4.5

3)35

(1.3

8)

13 (0.5

1)

259 (10.2)

X-a

xis

Stro

ke 2

40 (

9.45

)




10 (0.39)

9 (0.35)

32(1

.26)

45(1

.77)

567 (22.32)

591 (23.27)

8" Chuck

10" Chuck

6" Chuck

85 (3.35)168 (6.61)259 (10.2)

70 (

2.76

)12

5 (4

.92)

X-a

xis

Stro

ke 2

40 (

9.45

)




10 (0.39)

9 (0.35)

32(1

.26)

5 (0

.2)

8 (0

.31)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]


X-a

xis

Stro

ke 2

40 (

9.45

)

200

(7.8

7)

42(1.65) 14

.5(0

.57)

15.5

(0.6

1)

10 (

0.39

)

260 (10.24)

236 (9.29)



8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 390 (15.35) [L : 630 (24.8)]

B/C-Type : 366 (14.41) [L : 606(23.86)]

X-a

xis

Stro

ke 2

40 (

9.45

)


13(0

.51)

69.5

(2.7

4)

42(1.65)

55(2

.17)

14.5

(0.5

7)

212.

5 (8

.37)

284 (11.18)308 (12.13)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 450 (17.72) [L : 690 (27.17)]

B/C-Type : 426 (16.77) [L : 666 (26.22)]


X-a

xis

Stro

ke 2

40 (

9.45

)

208

(8.1

9)

13(0

.51)

27 (

1.06

)

8 (0

.31)

40(1.57)

344 (13.54)

368 (14.49)

8" Chuck

10" Chuck

Z-axis Stroke 460 (18.11) [L : 700 (27.56)]

A-Type : 351 (13.82) [L : 591 (23.27)]

B/C-Type : 327 (12.87) [L : 567 (22.32)]


53(2

.09)

30 (

1.18

)

30 (1.18)25 (0.98)

203

(7.9

9)

24 (

0.94

)

83 (

3.27

)13 (0

.51)245 (9.65)

269 (10.59)

X-a

xis

Stro

ke 2

40 (

9.45

)

19




Hi-TECH 230AL / BL / CL YSMC O.D (Sub)

Hi-TECH 230AL / BL / CL YSMC Axial (Sub)

Hi-TECH 230AL / BL / CL YSMC I.D (Sub)

Hi-TECH 230AL / BL / CL YSMC Radial (Sub) - Offset

8" Chuck

10" Chuck

6" Chuck

144 (5.67)101 (3.98)

55(2

.17)

22(0.87)

60(2.36)

195

(7.6

8)

68(2

.68)

25(0

.98)

87 (

3.43

)65

(2.

56)

65 (

2.56

)

63 (

2.48

)

41(1

.61)

87 (

3.43

)47

(1

.85)

76 (2.99)22(0.87)

60(2.36)

X-a

xis

Stro

ke 2

40 (

9.45

)


B/C-Type : Max Cutting Length 566 (22.28)



A-Type : Max Cutting Length 591 (23.27)

10 (0.39)

9 (0.35)

32(1

.26)

13 (0.5

1)

259 (10.2)5 (0.2)

5 (0.2)

8" Chuck

10" Chuck

6" Chuck

46(1.81)

168 (6.61)259 (10.2)

66 (

2.6)

92 (

3.62

)

12 (

0.47

)33

(1.3

)

39(1.54)

Max 85 (3.35)

48(1

.89)

152

(5.9

8)40

(1.

57)

99 (3.9)

71 (2.8)

60 (

2.36

)15

6 (6

.14)

24 (

0.94

)

5(0

.2)




10 (0.39)

9 (0.35)

8 (0.31)

X-a

xis

Stro

ke 2

40 (

9.45

)

12(0.47)

38 (1.5

)

8" Chuck

10" Chuck

6" Chuck

36(1.42)

167 (6.57)

89(3.5)

22(0.87)

105(4.13)

18(0.71)

72 (

2.83

)

95 (

3.74

)12

0 (4

.73)

120

(4.7

2)

X-a

xis

Stro

ke 2

40 (

9.45

)




10 (0.39)

9 (0.35)

32(1

.26)

259 (10.2) 50(1.97)

115

(4.5

3)35

(1.3

8)45

(1.7

7)13 (0

.51)

8" Chuck

10" Chuck

6" Chuck



A-Type Sub Spindle Stroke 665 (26.18)

10 (0.39)

9 (0.35)

115 (4.53)138 (5.43)259 (10.2)

47 (

1.85

)

15 (

0.59

)

210

(8.2

7)

32(1

.26)X

-axi

s St

roke

240

(9.

45)

148

(5.8

3)

13(0

.51)

77 (3.03)

105 (4.13)

Max 85 (3.35)

95(3

.74)

Hi-TECH 230AXL / BXL / CXL YMC O.D

Hi-TECH 230AXL / BXL / CXL YMC Axial

Hi-TECH 230AXL / BXL / CXL YMC I.D

Hi-TECH 230AXL / BXL / CXL YMC Radial

Quill Stroke : 120 (4.72)

8" Chuck

10" Chuck

Z-axis Stroke : 1,200 (47.24)

A-Type Max Cutting Length : 1,084 (42.68)

B/C-Type Max Cutting Length : 1,060 (41.73)

Tailstock Moving : 1,080 (42.52)

X-a

xis

Stro

ke :

240

(9.4

5)

42(1.65)

24 (0.9

4)6

(0.2

4)

10 (0.3

9)

760 (29.92)

736 (28.98)

200

(7.8

7)

282 (11.1)


8" Chuck

10" Chuck

Z-axis Stroke : 1,200 (47.24)

A-Type : 1,130 (44.49)

B/C-Type : 1,106 (43.54)

X-a

xis

Stro

ke :

240

(9.4

5)


23(0

.91)

59.5

(2.3

4)

42 (1.65)

280 (11.02)

55(2

.17)

4.5

(0.1

8)

212.

5 (8

.37)

784 (30.87)808 (31.81)

157.

5 (6

.2) 62

.5 (2.

46)


8" Chuck

10" Chuck

Z-axis Stroke : 1,200 (47.24)

A-Type : 1,190 (46.85)

B/C-Type : 1,166 (45.91)


X-a

xis

Stro

ke :

240

(9.4

5)

208

(8.1

9)

23(0

.91)

27 (1.

06)

18 (0.

71)

40(1.57)

844 (33.23)

868 (34.17) 282 (11.1)


8" Chuck

10" Chuck

Z-axis Stroke : 1,200 (47.24)

A-Type : 1,091 (42.95)

B/C-Type : 1,067 (42.01)

X-a

xis

Stro

ke :

240

(9.4

5)


53(2

.09)

30 (1.1

8)

30(1.18)

25(0.98)

203

(7.9

9)

13 (0.

51)

83 (3.

27)

66 (2.

6)

120

(4.7

2)24

(0.9

4)

745 (29.33)

769 (30.28)

267 (10.51)

Machine Specifications

ItemHi-TECH 230A / AL / AXL Hi-TECH 230AL / AXL

STD MC YMC SMC YSMC

Capacity

Swing over Bed mm (inch) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53)

Swing over Saddle mm (inch) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26)

Max Cutting Dia mm (inch) Ø425 (Ø16.73) Ø400 (Ø15.75) Ø400 (Ø15.75)

Standard Cutting Dia mm (inch) Ø213.6 (Ø8.41) Ø221 (Ø8.7) Ø277 (Ø10.91)

Max Cutting Lengthmm (inch)

403 (15.87) / L:643 (25.31) / XL:1,143 (45)

344 (13.54) / L:584 (22.99) / XL:1,084 (42.68) L:584 (22.99) / XL: 1,084 (42.68)

Chuck Size inch 8 8 (Sub:6)

Spindle

Type of Spindle Nose ASA A2-6 A2-6 (Sub:A2-5)

Max Spindle Speed rpm 4,500 4,500 (Sub:5,000)

Through Spindle Hole Dia mm (inch) Ø76 (Ø2.99) Ø76 (2.99) [Sub:Ø62 (2.44)]

Max Bar Size mm (inch) Ø65 (Ø2.56) Ø65 (Ø2.56) [Sub:Ø51 (Ø2.01)]

Spindle Bearing Inner Dia mm (inch) Ø110 (Ø4.33) Ø110 (Ø4.33) [Sub:Ø90 (Ø3.54)]

Spindle MotorMain kW (HP) 18.5 / 15 (25 / 20) 18.5 / 15 (25 / 20)

Sub kW (HP) - 7.5 / 5.5 (10 / 7.4) [OPT : 11 / 7.5 (15 / 10)]

Turret

Number of Tool Stations ea 12 12 (24 Positions Index) 12 (24 Positions Index)

Tool Size mm (inch) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5)

Turret Indexing Time sec/step 0.344 0.344

Axes

Rapid Traverse (X / Z / Y / B) m/min (ipm) 30 / 30 / 10 / - (1,181 / 1,181 / 394 / - ) 30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)

Max Stroke (X / Z / Y / B) mm (inch)240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )

/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )

L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,165 (9.45 / 47.24 / 4.72 / 45.87 )

Feed Motor (X / Z / Y / B) kW (HP) 3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / - ) 3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)

Tailstock

Max Stroke mm (inch) 460 (18.11) / L:700 (27.56) / XL:1,080 (42.52) -

Cylinder Diameter mm (inch) Ø65 (Ø2.56) / L:Ø65 (Ø2.56) / XL:Ø100 (Ø3.94) -

Quill Stroke mm (inch) XL:120 (4.72) -

Center Taper MT # 5 -

Turnmill

Spindle Motor kW (HP) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5)

Max Spindle Speed rpm - 5,000 5,000

Max Drill / Tap Size mm (inch) - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16

Min Index Angle deg - 0.0001 0.0001 (Sub:0.0001)

Tank

Lubrication / Hydraulic ℓ (gal) 12 (3.17) / 11 (2.91)

Coolant ℓ (gal) 115 (30.38) / L:125 (33.02) / XL:150 (39.63)125 (33.02) / L:140 (36.98)

/ XL:165 (43.59)L:125 (33.02) / XL:150 (39.63) L:140 (36.98) / XL:165 (43.59)

Large Capacity Coolant (OPT) ℓ (gal) 200 (52.83) / L:210 (55.48) / XL:235 (62.08)210 (55.48) / L:225 (59.44)

/ XL:250 (66.04)L:210 (55.48) / XL:235 (62.08) L:225 (59.44) / XL:250 (66.04)

Power Sources

Electrical Power Supply kVA 35 40 40

Dimension

Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83)

Floor Space (L×W) mm (inch)2,893 x 1,849.5 (113.9 x 72.81)

/ L:3,133 x 1,849.5 (123.35 x 72.81)/ XL:3,753 x 1,849.5 (147.76 x 72.81)

2,893 x 1,924.5 (113.9 x 75.77)/L:3,133 x 1,924.5 (123.35 x 75.77)

/ XL:3,753 x 1,924.5 (147.76 x 75.77)

L:3,133 x 1,849.5 (123.35 x 72.81)/ XL:3,753 x 1,849.5 (147.76 x 72.81)

L:3,133 x 1,924.5 (123.35 x 75.77)/ XL:3,753 x 1,924.5 (147.76 x 75.77)

Weight kgf (lbf) 5,800 (12,787) / L:6,500 (14,330) / XL: 8,050 (17,747)5,950 (13,118) / L:6,650 (14,661)

/ XL:8,200 (18,078)L:6,650 (14,661) / XL:8,200 (18,078) L:6,800 (14,991) / XL:8,350 (18,409)

NC Controller Fanuc 0i-TF Plus

Product Configuration Each product can be configured to fit your application.

Hi-TECH 230

Chuck 8”

STD

MC

YMC

A-Type

Short Bed

A / STDA / MCA / YMC

AL / STDAL / MCAL / YMCAL / SMCAL / YSMC

AXL / STDAXL / MCAXL / YMCAXL / SMCAXL / YSMC

Ref

1) L:Long Type2) XL:Extra Long Type3) MC:Turnmill [C-axis (0.0001˚)]4) S:Sub Spindle5) Y:Y-axis

B / STDB / MCB / YMC

BL / STDBL / MCBL / YMCBL / SMCBL / YSMC

C / STDC / MCC / YMC

CL / STDCL / MCCL / YMCCL / SMCCL / YSMC

BXL / STDBXL / MCBXL / YMCBXL / SMCBXL / YSMC

CXL / STDCXL / MCCXL / YMCCXL / SMCCXL / YSMC

Chuck 10”

STD

YMC

YSMC

B-Type

Long Bed

MC

SMC

Chuck 10”

STD

YMC

YSMC

C-Type

Extra Long Bed

MC

SMC

21



Product Configuration

ItemHi-TECH 230B/BL/BXL Hi-TECH 230BL/BXL Hi-TECH 230C/CL/CXL Hi-TECH 230CL/CXL

STD MC YMC SMC YSMC STD MC YMC SMC YSMC

Capacity

Swing over Bed mm (inch) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53)

Swing over Saddle mm (inch) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26)

Max Cutting Diamm (inch)

Ø425 (Ø16.73)

Ø400 (Ø15.75) Ø400 (Ø15.75)Ø425

(Ø16.73)Ø400 (Ø15.75) Ø400 (Ø15.75)

Standard Cutting Dia mm (inch)Ø213.6 (Ø8.41)

Ø221 (Ø8.7) Ø277 (Ø10.91)Ø255

(Ø10.04)Ø264 (Ø10.39) Ø277 (Ø10.91)

Max Cutting Length mm (inch)

379 (14.92)/ L:619 (24.37)

/ XL:1,119 (44.06)

320 (12.6)/ L:560 (22.05)

/ XL:1,060 (41.73)

L:560 (22.05)/ XL:1,060 (41.73)

379 (14.92)/ L:619(24.37)

/ XL:1,119 (44.06)

320 (12.6)/ L:560 (22.05)

/ XL:1,060 (41.73)

L:560 (22.05)/ XL:1,060 (41.73)

Chuck Size inch 10 10 (Sub:6) 10 10 (Sub:6)

Spindle

Type of Spindle Nose ASA A2-8 A2-8 (Sub:A2-5) A2-8 A2-8 (Sub:A2-5)

Max Spindle Speed rpm 3,500 3,500 (Sub:5,000) 3,500 3,500 (Sub:5,000)

Through Spindle Hole Dia mm (inch) Ø91 (Ø3.58) Ø91 (3.58) [Sub:Ø62 (2.44)] Ø91 (Ø3.58) Ø91 (3.58) [Sub:Ø62 (2.44)]

Max Bar Size mm (inch) Ø81 (Ø3.19) Ø81 (Ø3.19) [Sub:Ø51 (Ø2.01)] Ø81 (Ø3.19) Ø81 (Ø3.19) [Sub:Ø51 (Ø2.01)]

Spindle Bearing Inner Dia mm (inch) Ø140 (Ø5.51) Ø140 (Ø5.51) [Sub:Ø90 (Ø3.54)] Ø140 (Ø5.51) Ø140 (Ø5.51) [Sub:Ø90 (Ø3.54)]

Spindle MotorMain kW (HP) 18.5 / 15 (25 / 20) 18.5 / 15 (25 / 20) 22 / 18.5 (29 / 25) 22 / 18.5 (29 / 25)

Sub kW (HP) - 7.5 / 5.5 (10 / 7.4) [OPT : 11 / 7.5 (15 / 10)] - 7.5 / 5.5 (10 / 7.4)

[OPT : 11 / 7.5 (15 / 10)]

Turret

Number of Tool Stations ea 12 12 (24 Positions Index) 12 (24 Positions Index) 12 12 (24 Positions Index) 12 (24 Positions Index)

Tool Size mm (inch) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5)

Turret Indexing Time sec/step 0.344 0.344 0.344 0.344

Axes

Rapid Speed (X / Z / Y / B)

m/min (ipm) 30 / 30 / 10 / - (1,181 / 1,181 / 394 / - )

30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)

30 / 30 / 10 / - (1,181 / 1,181 / 394 / - )

30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)

Max Stroke (X / Z / Y / B)

mm (inch)240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )

/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )

L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,140(9.45 / 47.24 / 4.72 / 44.88)

240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )

/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )

L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,140(9.45 / 47.24 / 4.72 / 44.88)

Feed Motor (X / Z / Y / B)

kW (HP) 3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / -)

3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)

3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / -)

3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)

Tailstock

Max Stroke mm (inch)460 (18.11)

/ L:700 (27.56) / XL:1,080 (42.52)

-460 (18.11)

/ L:700 (27.56) / XL:1,080 (42.52)

-

Cylinder Diametermm (inch)

Ø65 (Ø2.56) / L:Ø65 (Ø2.56)

/ XL:Ø100 (Ø3.94)-

Ø65 (Ø2.56) / L:Ø65 (Ø2.56)

/ XL:Ø100 (Ø3.94)-

Quill Stroke mm (inch) XL:120 (4.72) - XL:120 (4.72) -

Center Taper MT # 5 - # 5 -

Turnmill

Spindle Motor kW (HP) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5)

Max Spindle Speed rpm - 5,000 5,000 - 5,000 5,000

Max Drill / Tap Size mm (inch) - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16 - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16

Min Index Angle deg - 0.0001 0.0001 (Sub:0.0001) - 0.0001 0.0001 (Sub:0.0001)

Tank

Lubrication ℓ (gal) 12 (3.17) 12 (3.17) 12 (3.17) 12 (3.17)

Hydraulic ℓ (gal) 11 (2.91) 11 (2.91) 11 (2.91) 11 (2.91)

Coolant ℓ (gal)115 (30.38)

/ L:125 (33.02) / XL:150 (39.63)

125 (33.02) / L:140 (36.98)

/ XL:165 (43.59)

L:125 (33.02) / XL:150 (39.63)

L:140 (36.98) / XL:165 (43.59)

115 (30.38) / L:125 (33.02)

/ XL:150 (39.63)

125 (33.02) / L:140 (36.98)

/ XL:165 (43.59)

L:125 (33.02) / XL:150 (39.63)

L:140 (36.98) / XL:165 (43.59)

Large Capacity Coolant (OPT)

ℓ (gal)200 (52.83)

/ L:210 (55.48) / XL:235 (62.08)

210 (55.48) / L:225 (59.44)

/ XL:250 (66.04)

L:210 (55.48) / XL:235 (62.08)

L:225 (59.44) / XL:250 (66.04)

200 (52.83) / L:210 (55.48) / XL:235 (62.08)

210 (55.48) / L:225 (59.44)

/ XL:250 (66.04)

L:210 (55.48) / XL:235 (62.08)

L:225 (59.44) / XL:250 (66.04)

Power Sources

Electrical Power Supply kVA 35 40 40 35 40 45 50

Dimension

Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83)

Floor Space (L×W) mm (inch)

2,893 x 1,849.5 (113.9 x 72.81)

/ L:3,133 x 1,849.5 (123.35 x 72.81)

/ XL:3,753 x 1,849.5 (147.76 x 72.81)

2,893 x 1,924.5 (113.9 x 75.77)

/L:3,133 x 1,924.5 (123.35 x 75.77)

/ XL:3,753x1,924.5 (147.76 x 75.77)

L:3,133 x 1,849.5 (123.35 x 72.81)

/ XL:3,753 x1,849.5 (147.76 x 72.81)

L:3,133 x 1,924.5 (123.35 x 75.77)

/ XL:3,753 x1,924.5 (147.76 x 75.77)

2,993 x 1,849.5(117.83 x 72.81)

/ L:3,233 x 1,849.5(127.28 x 72.81)

/ XL:3,853 x 1,849.5(151.69 x 72.81)

2,993 x 1,924.5(117.83 x 75.77)

/ L:3,233x1,924.5(127.28 x 75.77)

/ XL:3,853x1,924.5(151.69 x 75.77)

L:3,233x1,849.5(127.28 x 72.81)

/ XL:3,853x1,849.5(151.69 x 72.81)

L:3,233x1,924.5(127.28 x 75.77)

/ XL:3,853x1,924.5(151.69 x 75.77)

Weight kgf (lbf)5,800 (12,787)

/ L:6,500 (14,330) / XL: 8,050 (17,747)

5,950 (13,118) / L:6,650 (14,661)

/ XL:8,200 (18,078)

L:6,650 (14,661)

/ XL:8,200 (18,078)L:6,800 (14,991)

/ XL:8,350 18,409)

5,900 (13,007)

/ L:6,600 (14,551)

/ XL:8,150 (17,968)

6,050 (13,338)

/ L:6,750 (14,881)

/ XL:8,300 (18,298)

L:6,750 (14,881)

/ XL:8,300 (18,298)L:6,900 (15,212)

/ XL:8,450 (18,629)

NC Controller Fanuc 0i-TF Plus

23

NC Specifications [Fanuc 0i-TF Plus]※ ㅡ : Not available S : Standard O : Option

Item Specification STD MC SMC YMC YSMC

Controlled Axis

Controlled Axis (Cs Axis) 2 - Axes 2-Axes 3-Axes 5-Axes 4-Axes 6-Axes

Simultaneously Controlled Axes

2 - Axes 2-Axes 3-Axes 4-Axes 4-Axes 4-Axes

Least Input Increment0.001 mm, 0.0001 deg, 0.0001 inch

S S S S S

Least Input Increment 1 / 100.0001 mm, 0.00001 inch

O O O O O

Inch / Metric Conversion G20, G21 S S S S S

Store Stroke Check 1 S S S S S

Store Stroke Check 2, 3 S S S S S

Chamfering on / off S S S S S

Backlash Compensation S S S S S

Operation

Automatic & MDI Operation

S S S S S

Program Number Search S S S S S

Sequence Number Search S S S S S

Dry Run, Single Block S S S S S

Manual Handle Feed 1Unit S S S S S

Manual Handle Feed Rate x1, x10, x100 S S S S S

Interpolation Function

Positioning G00 S S S S S

Linear Interpolation G01 S S S S S

Circular Interpolation G02,G03 S S S S S

Dwell (Per Seconds) G04 S S S S S

Polar Coordinate Interpolation

G12.1 / G13.1 - S S S S

Cylindrical Interpolation G7.1 - S S S S

Threading G32 S S S S S

Multiple Threading S S S S S

Continuous Threading S S S S S

Threading Retract S S S S S

Variable Lead Threading G34 S S S S S

Ref Position Return 1st G28 S S S S S

Ref Position Return Check G27 S S S S S

2 / 3 / 4th Ref Position Return G30 S S S S S

Arbitrary Speed Threading O O O O O

Feed Function

Rapid Traverse OverrideF0, F25, F50, F100

S S S S S

Feed Per Minute (mm/min) G98 S S S S S

Feed Per Revolution (mm/rev) G99 S S S S S

Rapid Traverse Bell-shaped Acceleration / Deceleration S S S S S

Feedrate Override 0 ~ 150% S S S S S

Jog Feed Override 0 ~ 1,260 mm/min S S S S S

Program Input

Tape Code EIA / ISO S S S S S

Optional Block Skip 9 ea S S S S S

Program Number O4-digits(1–9999) S S S S S

Sequence Number N8 - Digits S S S S S

Decimal Point Programming S S S S S

Coordinate System Setting G50 S S S S S

Coordinate System Shift S S S S S

Workpiece Coordinate System (G52 ~ G59) S S S S S

Workpiece Coordinate System Preset (G92.1) S S S S S

Direct Drawing Dimension Programming S S S S S

Item Specification STD MC SMC YMC YSMC

Program Input

G Code System A S S S S S

Programmable Data Input G10 S S S S S

Sub Program Call 10 folds nested S S S S S

Custom Macro B S S S S S

Addition of Custom Macro-common Variables

#100 ~ #199, #500 ~ #999

S S S S S

Canned Cycles S S S S S

Multiple Repetitive Cycle S S S S S

Multiple Repetitive Cycle II S S S S S

Canned Cycles for Drilling S S S S S

Manual Guide i S S S S S

Spindle Speed Function

Constant Surface Speed Control G96 / G97 S S S S S

Spindle Override 0 ~ 150% S S S S S

Spindle Orientation S S S S S

Rigid Tapping S S S S S

Spindle Synchronous Control - - S - S

Tool Function / Compensation

Tool Function T4-digits S S S S S

Tool Offset Pairs 128 pairs S S S S S

Tool Nose Radius Compensation S S S S S

Tool Geometry / Wear Compensation

S S S S S

Tool Life Management S S S S S

Automatic Tool OffsetTool presetter option is required

S S S S S

Direct Input Tool Offset Value Measured B

S S S S S

Editing Operation

Part Program Storage Length 5,120 m (2MB) S S S S S

Number of Register Able Programs

Max.1000 ea S S S S S

Background Editing S S S S S

Extended Part Program Editing

S S S S S

Play Back S S S S S

Operation / Display

Clock Function S S S S S

Self-diagnosis Function S S S S S

Alarm History Display S S S S S

Help Function S S S S S

Run Hour and Parts Count Display

S S S S S

Graphic Function S S S S S

Multi-language DisplayKorean, English, German, French, Italian, Chinese, Spanish, Portuguese, Polish, Hungarian, Swedish, Russian

S S S S S

Data Input / Output

Ethernet Interface S S S S S

Memory Card Interface S S S S S

USB Card Interface S S S S S

Others

Display Unit 15” Non touch display S S S S S

Fanuc i-HMI 15” Touch type display O O O O O

Others

L-HTLD (Hwacheon Tool Load Detect System) S S S S S

L-CAL (Lathe Calculator Function) S S S S S

L-COUNT (Work / Tool Counter Management) S S S S S

HLVC (Hwacheon Lathe Vibration Control) S S S S S

M-VISION Pro O O O O O

Hwacheon Global Network

Hwacheon Headquarters Hwacheon Europe Hwacheon Asia Hwacheon America

HC-T153-R4.0-202011

The product design and specifications may change without prior notice.

Read the operation manual carefully and thoroughly before operating the product,

and always follow the safety instructions and warnings labels attached on the surfaces of the machines.

www.hwacheon.com

Please contact us for product inquiries.

HEAD OFFICE

HWACHEON MACHINE TOOL CO., LTD.

123-17, HANAMSANDAN 4BEON-RO, GWANGSAN-GU, GWANGJU, KOREA

TEL: +82-62-951-5111 FAX: +82-62-951-0086

SEOUL OFFICE

46, BANGBAE-RO, SEOCHO-GU, SEOUL, KOREA

TEL: +82-2-523-7766 FAX: +82-2-523-2867

USA

HWACHEON MACHINERY AMERICA, INC.

555 BOND STREET, LINCOLNSHIRE, ILLINOIS, 60069, USA

TEL: +1-847-573-0100 FAX: +1-847-573-9900

SINGAPORE

HWACHEON ASIA PACIFIC PTE. LTD.

21 BUKIT BATOK CRESCENT, #08-79 WCEGA TOWER,

658065, SINGAPORE

TEL: +65-6515-4357 FAX: +65-6515-4358

VIETNAM

HWACHEON MACHINE TOOL VIETNAM CO., LTD.

HCM: TOA NHA SCS, KHU CNC, Q.9, HCMC, VIET NAM

TEL: +84-28-2253-2613

HN: SO 11, D. HUU NGHI, VSIP BAC NINH, VIET NAM

TEL : +84-22-2390-8981

GERMANY

HWACHEON MACHINERY EUROPE GMBH

JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY

TEL: +49-234-912-816-0 FAX: +49-234-912-816-60

INDIA

HWACHEON MACHINE TOOL INDIA PVT. LTD.

LUNKAD SKY VISTA, UNIT NO.202, 2ND FLOOR PLOT NO.84,

LOHEGAON, VIMAN NAGAR, PUNE 411014, INDIA

+91-96-73-986633

CHINA

HWACHEON MACHINE TOOL CHINA CO., LTD.

B03A LIANGUAN JUHE INTERNATIONAL HARDWARE CITY, NO.

143 ZHENANZHONG ROAD, JINXIA, CHANGAN TOWN,

DONGGUAN CITY, GUANDONG PROVINCE , CHINA #523852

TEL: +86-769-8932-0601 FAX: +86-769-8932-0602

Hi-TECH 230

Documents

Transcript of Hi-TECH 230