Hi-Tec Cat Ver11hitec-implants.com/media/Hi-TecCatalog2012.pdf · HI-TEC IMPLANTS LTD. meets and...
Transcript of Hi-Tec Cat Ver11hitec-implants.com/media/Hi-TecCatalog2012.pdf · HI-TEC IMPLANTS LTD. meets and...
D e s i g n & P ro d u c t i o n I m p l a n t s & P ro s t h e t i c E l e m e n t s
MULTI SYSTEM PRODUCT CATALOGUE 11th Edition
HI-TEC IMPLANTS LTD. meets and exceeds the highest
standards in the field of the medical devices: the main
approvals, besides many others, are:
FDA APPROVAL - Center for Devices and Radiological
Health in the US FDA (Food and Drug Administration)
since 1994.
CE MARK - After demonstrating compliance with Annex II
of Medical Devices Directive 93/42/EEC, entitles us to use
CE Marketing on our products.
ISO 13485: 2003 - an international standard for quality
management of Medical Devices. Hi-Tec Implants Ltd.
meets the requirements of compliance of the Quality
System to the requirements of ISO 13485: 2003 for the
Design, Manufacture and Inspection of Dental Implants
and Accessories.
ISO 9001: 2000 - Certifies that Hi-Tec Implants Ltd.
demonstrates compliance of our Quality System to meet
the requirements os ISO 9001: 2000 (an international
standard for quality managment system).
Health Canada Medical Device License
and CMDCAS IS0 13485:2003 Accredited since 2005
Color Coding
1ø 4.20 mmø 3.75 mmø 3.30 mm ø 5.00 mm
TAB LE OF CONTENTS
HI TEC IMPLANTS Corporate Profile
TAPERED SELF THREAD Internal Hex Thread Implants
LOGIC PLUS Tapered Thread Implants
SELF THREAD 3.30, 3.75 and LOGIC PLUS Prosthetic Elements
SELF THREAD 4.20 & 5.00 Prosthetic Elements
LOGIC Tapered Thread Implants
LOGIC Prosthetic Elements
VISION Tapered Thread Implants
VISION Prosthetic Elements
SUMMIT External Hex Thread Implants
VISION Prosthetic Elements
TITE - FIT Internal Octgon & Morse Taper Implants
TAPERED TITE - FIT Internal Octgon & Morse Taper Implants
TITE - FIT & TAPERED TITE - FIT Prosthetic Elements
TRX Trans Gingival Implants
TRX-TP Trans Gingival Implants
TRX-BA Ball Attachment Implants
TRX-OP One Piece Implants
TRI and TRI-N Mini Implants
TRI-OR Orthodontic Implants
DEPTH CONTROL SYSTEM
BONE TRAP and TORQUE WRENCH
2
3
6
9
9
15
18
19
22
23
26
28
31
34
36
38
38
40
42
44
45
46
H I -TEC IMPLANTS - Adv anced New Techno logy
Innovative dental implants and prosthetic elements for over 20 years
Corporate Profile
Hi-Tec Implants developes, manufactures and markets an extensive range
of dental implants and prosthetic elements since 1990.
Hi-Tec Implants was founded by dental professionals with rich clinical
experience, and it’s commitment is to develop products that offer long-
term compatibility with implant dentistry. The goal is to continue to
provide the most technologically advanced products, to help dentists
develop their practice and to provide their patients with the most up-
to date treatment.
Hi-Tec Implants houses an advanced production facility with state-of-the-art
machinery allowing for the utmost accuracy, fast turnaround time, and
fulfillment of all customer’s needs.
The headquarters are located in the Herzlia Industrial Area, Israel.
Quality Assurance
The medical use of our products demands that ultimate care is taken in
assuring quality control throughout all our operations. Over the years,
Hi-Tec Implants commitment to quality products and service has met and
exceeded the highest standards set by the FDA and many other
regulatory agencies. Hi-Tec Implants have received ISO 9001 and CE
Certifications representing compliance with the International Standards
Organization and European Medical Device Directives.
Research and Clinical Experience
20 years of research and rich clinical experience in many countries
around the world enable Hi-Tec Implants to develop products that offer
long-term satisfaction. Moreover, due to the deep understanding of
implant dentistry, clinical studies demonstrate an extremely high rate
of Osseo-Integration and functional stability.
Product Diversity
Hi-Tec Implants offers an extensive range of dental implants, prosthetic
elements and surgical tools. Along with this wide range of products,
Hi-Tec Implants provides all necessary backup support, focuses on
excellent client service and comprehensive training programs.
Knowledgeable and friendly sales personnel and technical experts can
answer all questions.
Client Serv ice and Technical Support
Hi-Tec Implants takes pride in the extensive knowledge and training of its
staff. Our dedicated Client Service personnel have years of experience in the
dental field and use this expertise to assist dental professionals using Hi-Tec
products to provide their patients with the ultimate in dental care.
U S AFOOD & DRUG ADMINISTRATION
2
I NTR O DU C T I O N
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
3.30 m m Ta p e re d Ti t a n i u m T h re a d I m p l a n t S e l f Th r e a d 3.30
3.75 m m Ta p e re d Ti t a n i u m T h re a d I m p l a n t S e l f Th r e a d 3.75
4.20 m m Ta p e re d Ti t a n i u m T h re a d I m p l a n t S e l f Th r e a d 4.20
5.00 m m Ta p e re d Ti t a n i u m T h re a d I m p l a n t S e l f Th r e a d 5.00
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
Integrated SurfaceNTI 8-SR
NTI 10-SR
NTI 11.5-SR
NTI 13-SR
NTI 16-SR
Integrated SurfaceSLT 8-SR
SLT 10-SR
SLT 11.5-SR
SLT 13-SR
SLT 16-SR
Integrated SurfaceGTI 8-SR
GTI 10-SR
GTI 11.5-SR
GTI 13-SR
GTI 16-SR
Integrated SurfaceWTI 8-SR
WTI 10-SR
WTI 11.5-SR
WTI 13-SR
WTI 16-SR
Cat. No. ItemLength
Cat. No. ItemLength
Cat. No.
Cat. No.
Item
Item
Length
Length
ø 3.30 mm Titanium
Self Tapping Implants
Including Titanium
Cover Screw
ø 3.75 mm Titanium
Self Tapping Implants
Including Titanium
Cover Screw
ø 4.20 mm Titanium
Self Tapping Implants
Including Titanium
Cover Screw
ø 5.00 mm Titanium
Self Tapping Implants
Including Titanium
Cover Screw
S E L F T H R E A DTA P E R E D I n t e r n a l H ex Th read I mp l an t s
ø 2 mm
PD
ø 2.50 mm
FSD
ø 4.30 mm
WTD
ø 2.80 mm
NTD CSD
ø 3.65 mm
GTDRB
ø 3.20 mm
STD
NTI 3.30
SLT 3.75
GTI 4.20
WTI 5.00
TA P E R E D S E L F T H R E A D ™
1.
2.
3.
4.
5.
After exposure of the bone penetrate the bone to
the depth of 8 mm using a PD 2 mm internal
irrigation drill.
X-rays can be taken with paralleling tool placed in
preparation to evaluate length and direction.
Use FSD 2.50 mm internal irrigation drill
to achieve required depth.
Use NTD 2.80 mm internal irrigation drill to
complete the preparation for the SELF THREAD
3.30 implant.
- In case of dense bone, the preparation should be
enlarged with a STD 3.20 mm internal irrigation
drill to the depth of 5 mm.
The STD 3.20 mm internal irrigation drill
completes the preparation of the SELF THREAD
3.75 implant. In case of dense bone, use Bone
Tap S-BT for final preparation for SELF THREAD
3.75 implant.
7.
8.
9.
10.
The GTD 3.65 mm internal irrigation drill completes the
preparation for the SELF THREAD 4.20 mm implant.
In case of dense bone, use Bone Tap G-BT for final
preparation and the CSD internal irrigation drill for
cervical preparation for SELF THREAD 4.20 implant.
The WTD 4.30 mm internal irrigation drill completes
preparation for SELF THREAD 5.00 mm implant.
In case of dense bone, use Bone Tap W-BT for final
preparation for SELF THREAD 5.00 implant.
Hold the Implant mount and thread the implant into
the preparation site, continue using a Rachet or Hex
Screw Driver (HR, HSD) with adaptor (RAD) or
insertion tool (LIT-S, LIT-M).
Undo the connecting screw using a 1.25 mm Hex Tool
(SHT) and remove mount. If necessary use Long
Insertion Tool (LIT-L) to continue screwing the implant.
Connect the cover screw or healing cap using the
1.25 Hex Tool (SHT).
6.
Ta p e r e d S e l f T h r e a d I n t e r n a l I r r i g at i o n D r i l l S e q u e n ce
P l a ce m e n t o f S e l f T h r e a d I m p l a n t s
Su rg i c a l D r i l l s
H E A L I N G CA P S
TA P E R E D S E L F T H R E A D Su rg i c a l K i t
S U R GI CA L I N S T R U M E N TAT I O N
HR - Hex Ratchet
HR-TW - Torque Wrench 10-35 Ncm
HR S - Square Ratchet
HSD - Hex Screw Driver
RAD - Hex to Square Adaptor
DL - Drill Extension
PT - Paralleling Tool
S-BT ll - Bone Tap for 3.75
N-BT ll - Bone Tap for 3.30
G-BT ll - Bone Tap for 4.20
O P T I O N A L CO M P O N E N T S
HC- - 3 mm Healing Cap for 3.30 & 3.75 Implants
HC- - 5 mm Healing Cap for 3.30 & 3.75 Implants
HC-3-P - 3 mm Anatomic Healing Cap for 3.30 & 3.75
HC-5-P - 5 mm Anatomic Healing Cap for 3.30 & 3.75
W-HC-3 - 3 mm Healing Cap for 4.20 & 5.00 Implants
LIT-C - Insertion Tool for Contra Angle
SHT-C - 1.25 Hex Tool for Contra Angle
LIT-L - Long Insertion Tool
LIT-M - Medium Insertion Tool
LIT-S - Short Insertion Tool
SHT - 1.25 Hex Tool
SHT-L - 1.25 Long Hex Tool
W-HC-5 - 5 mm Healing Cap for 4.20 & 5.00 Implants
W-HC-3-P - 3 mm Anatomic Healing Cap for 4.20 & 5.00
W-HC-5-P - 5mm Anatomic Healing Cap for 4.20 & 5.00
W-BT II - Bone Tap for 5.00
Tap e red Th read Im p l an t s
Cat. No.
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Item
Length
Length
Length
Length
3.5 m m T i t a n i u m T h re a d I m p l a n t s L GI P L U S 3.50
8 mm
10 mm
11.5 mm
13 mm
16 mm
LGI PLUS 3.5 - 8
LGI PLUS 3.5 - 10
LGI PLUS 3.5 - 11.5
LGI PLUS 3.5 - 13
LGI PLUS 3.5 - 16
Pre-Mounted ø 3.50
Titanium Integrated Surface™
Self Tapping Implant
& Cover Screw
4.3 m m T i t a n i u m T h re a d I m p l a n t s L GI 4.30P L U S
6 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
LGI PLUS 4.3 - 6
LGI PLUS 4.3 - 8
LGI PLUS 4.3 - 10
LGI PLUS 4.3 - 11.5
LGI PLUS 4.3 - 13
LGI PLUS 4.3 - 16
Pre-Mounted ø 4.30
Titanium Integrated Surface™
Self Tapping Implant
& Cover Screw
5.0 m m T i t a n i u m T h re a d I m p l a n t s L GI 5.00P L U S
6 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
LGI PLUS 5.0 - 6
LGI PLUS 5.0 - 8
LGI PLUS 5.0 - 10
LGI PLUS 5.0 - 11.5
LGI PLUS 5.0 - 13
LGI PLUS 5.0 - 16
Pre-Mounted ø 5.0
Titanium Integrated Surface™
Self Tapping Implant
& Cover Screw
X6 - Unique Thread and Collar Design
Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
6.0 m m T i t a n i u m T h re a d I m p l a n t s L GI 6.00P L U S
6 mm
8 mm
10 mm
11.5 mm
13 mm
LGI PLUS 6.0 - 6
LGI PLUS 6.0 - 8
LGI PLUS 6.0 - 10
LGI PLUS 6.0 - 11.5
LGI PLUS 6.0 - 13
Pre-Mounted ø 6.0
Titanium Integrated Surface™
Self Tapping Implant
& Cover Screw
L O GI C P L U S
Su r g i c a l D r i l l s
P l a ce m e n t o f L O GI C P L U S I m p l a n t s
7.
In case of dense bone, use the WTD 4.30 mm internal
irrigation drill to complete preparation.
GTD 3.65 mm internal irrigation drill completes the
preparation for the LOGIC PLUS 5.00 implant in soft
bone. In case of dense bone, use the WTD 4.30 mm
internal irrigation drill to complete preparation.
Use RTD 5.20 mm internal irrigation drill for the
preparation of the LOGIC PLUS 6.00 implant.
Hold the implant mount and thread the implant into
the preparation site, continue using a Ratchet or Hex
Screw Driver (HR, HSD) with adaptor (RAD) or insertion
tool (LIT-S, LIT-M), or LIT-C for contra angle.
Undo the connection screw using a 1.25 mm Hex Tool
(SHT) and remove mount. If necessary use long
insertion Tool (LIT-L) to continue screwing the implant.
Connect the cover screw or healing cap using the 1.25
Hex Tool (SHT).
8.
9.
10.
11.
L O GI C P L U S ™
CSD
ø 3.50 mm
L O GI C P L U S D R I L L S E Q U E N CE
LGI PLUS 3.50
LGI PLUS 4.30
LGI PLUS 5.00
Hard BoneSoft Bone
LGI PLUS 6.00
RB PD
ø 2 mm ø 2.50 mm
FSD NTD
ø 2.80 mm
STD
ø 3.20 mm
GTD
ø 3.65 mm
WTD
ø 4.30 mm
RTD
ø 5.20 mm
After exposure of the bone penetrate the bone to the
depth of 8 mm using a PD 2mm internal irrigated drill.
X-rays can be taken with paralleling tool placed in
preparation to evaluate length and direction.
Use FSD 2.50mm internal irrigation drill to achieve
required depth.
NTD 2.80 mm internal irrigation drill completes the
preparation for the LOGIC PLUS 3.50 implant in soft
bone. In case of dense bone, the preparation should be
enlarged with a STD 3.20 mm internal irrigation drill
and CSD internal irrigation drill for cervical preparation.
STD 3.20 mm internal irrigation drill completes the
preparation for the LOGIC PLUS 4.3 Implant in soft bone.
In case of dense bone, use the GTD 3.65 mm internal
irrigation drill to complete the preparation.
GTD 3.65 mm internal irrigation drill completes the
preparation for the LOGIC PLUS 5.00 implant in soft
bone.
1.
2.
3.
4.
5.
6.
L O GI C P L U S ™
HSD - Hex Screw Driver
LIT-S - Short Insertion Tool for Mount
RAD - Hex to Square Adaptor
LIT-C - Insertion Tool for Contra Angle
DL - Drill Extension
SHT - 1.25 Hex Tool
PT - Paralleling Tool
SHT-L - 1.25 Long Hex Tool
HR-TW - Torque Wrench 10-35 Ncm
HR - Hex Ratchet
SHT-C - 1.25 Hex Tool for Contra Angle
LIT-M - Medium Insertion Tool
LIT-L - Long Insertion Tool
HC - 5 mm Healing Cap for LOGIC PLUS
HC 3 - 3 mm Healing Cap for LOGIC PLUS
HC- -P - 3 mm Anatomic Healing LOGIC PLUS
HC- -P - 5 mm Anatomic Healing LOGIC PLUS
H E A L I N G CA P S
Item MaterialCat No Length Application
Over Denture
Ball Attachment
Surgical
Titanium Alloy
BBA 0.5
BBA 2
BBA 4
BBA 6
0.5 mm
2 mm
4 mm
6 mm
Over Denture
Ball Attachment
Nylon Cap Nylon
Nylon
Nylon
Nylon
NC
NC-P
NC-2.3
NC-2.2
2.5 Standard
2.5 Pink - Soft
2.3 Orange
2.2 Green
Metal Housing Stainless steelMH For NC
Over-Denture
Base Abutment
Surgical
Titanium Alloy
OBA 3
OBA 5
3 mm
5 mm
Over-Denture Bar
Attachment, Fixed
Detachable Bridge
Bridge Base
Abutment
Surgical
Titanium AlloyCBA 2
CBA 0.7
CBA 3
CBA 4
2 mm
0.7 mm
3 mm
4 mm
Fixed Detachable
Bridge
Screw-in
Abutment
Surgical
Titanium Alloy
SCA 10 mm Fixed Detachable
Bridge
Anti-Rotation
Abutment
Surgical
Titanium Alloy
ACA 10 mm Fixed Cemented
Crown & Bridge
Narrow Anti-Rotation
Abutment
Surgical
Titanium Alloy
ACA-S 9 mm Fixed Cemented
Bridge & Crown
Wide Anti-Rotation
Abutment
Surgical
Titanium Alloy
ACA-P 10 mm Anatomic Abutment for
Esthetic Crown Restoration
Full Anti-Rotation
Abutment
Surgical
Titanium Alloy
ACA-R 12 mm Anatomic Abutment for
Esthetic Crown Restoration
Esthetic Abutment Surgical
Titanium Alloy
ACA-E 1
ACA-E 2
ACA-E 3
ACA-E 4
7 mm
8 mm
9 mm
10 mm
Fix Cemented Crown &
Fixed Cemented Bridge
Gold Castable
Abutment
Gold Base &
Plastic Sleeve
PGA 12 mm
Plastic / Titanium
Castable Anti-Rotation
Abutment
Surgical
Titanium Alloy &
Plastic Sleeve
PTA 12 mm
Plastic Castable Anti-
Peek Temporary
Rotation Abutment
Abutment
Plastic Abutment
Plastic Abutment
Titanium Screw
Titanium Screw
PCA
RPA
RPA 15
RPA 25
10 mm
10 mm
10 mm
10 mm
SELF THREAD 3.30, 3.75 & LOGIC PLUS P r o s t he t i c E l em en t s
One Piece Retrievable Crownor Cemented Crown
One Piece Retrievable Crownor Cemented Crown
Castable Abutment for
Castable Abutment for
One Piece Retrievable Crownor Cemented Crown
Temporary Restoration
Castable Abutment for
15° Angulated Abutment
25° Angulated Abutment
Surgical
Titanium Alloy
ANA 15
ANA 25
10 mm
10 mm
Fixed Cemented Crown &
Fixed Cemented Bridge
Shouldered 15
Angulated Abutment
° Surgical
Titanium Alloy
ANA 15 - E - 1
ANA 15 - E - 2
1 mm
2 mm
Fixed Cemented Crown &
Fixed Cemented Bridge
12 mm
12 mm
Zirconium / Titanium
Anti-Rotation Abutment
Zirconium / Titanium
Anti-Rotation Abutment
Zirconium with
Titanium base
& Titanium Screw
ZTA
ZTA-B
One Piece Retrievable
Crown
Abutment for Cemented
Crown & Bridge
Modular ShoulderedAbutment
ACA-G-1ACA-G-2ACA-G-3ACA-G-4
1 mm2 mm3 mm4 mm
Surgical TitaniumAlloy
Fixed CementedBridge & Crown
Impression Transfer G-PT Plastic Closed TrayImpression
Comfort Cap G-HC Plastic For ACA-G
Castable Sleeve GC-R Plastic For Wax Up
Anti-Rotation Castable Sleeve
GC-F Plastic For Wax Up
Analog GL Stainless Steel Abutment Analog
M o d u l a r S h o u l d e r e d A b u t m e n t S y s t e m
U n i v e r s a l U n i t S y s t e m
Straight Abutment S-MU-1S-MU-2S-MU-3S-MU-4
1 mm2 mm3 mm4 mm
Surgical Titanium Alloy Fixed Detachable Bridge
17º Abutment30º Abutment
S-MU-17S-MU-30
1.5 mm1.3 mm
Surgical Titanium Alloy Fixed Detachable Bridge
MU-Comfort Cap MU-HC 2.5 mm Plastic with TitaniumScrew
Includes MU-S screw
MU-Castable Sleeve MU-PC 12 mm Plastic For Wax Up
MU-Titanium Sleeve MU-TPC 12 mm Plastic For Provisional Bridge
MU-Fixation Screw MU-FS 2.5 mm Surgical Titanium Alloy Fixation Screw
MU-Closed ImpressionTransfer
MU-AAT Stainless Steel Closed Tray Impression
MU-Opened ImpressionTransfer
MU-AAT-L Stainless Steel Opened Tray Impression
MU-Analog MU-CL Stainless Steel Abutment Analog
MU-Tool-Hex MU-IT Stainless Steel For Hex Ratchet
MU-Tool-Square MU-IT-Q Stainless Steel For Square Ratchet
Item MaterialCat No Length Application
P r o s th e t i c E l em en t sSELF THREAD 3.30, 3.75 & LOGIC PLUS
CASTABLE PLAST IC SLEEVES, T I TAN IUM SLEEVES & F IXAT ION SCREWS
P R O S T H E T I C T O O L S
For HC, SCA, ACA, ANA, BBA, FS, TS
For HC, SCA, ACA, ANA, BBA, FS, TS
For HC, SCA, ACA, ANA, BBA, FS, TS
1.25 mm Hex Tool
for Contra-Angle
1.25 mm Hex Tool
Long 1.25 Hex Tool
SHT-C
SHT
SHT-L
I M P R E S S I O N T R A N S F E R S
A N A L O GS
Item Cat No Application
SAT - Impression Transfer for Screw-In Abutment Closed Tray
AAT - Impression Transfer for Hex Lock Abutment Closed Tray
AAT-L - Impression Transfer for Hex Lock Abutment Open Tray
AST - Impression Transfer for Closed Tray with “SNAP CAP”
T-PT - Impression “SNAP CAP” for AST
TS - Transfer for Detachable Bridge on OBA & CBA
IL - Implant Analog
BL - Abutment Analog for OBA
CL - Conical Abutment Analog for CBA
BNL - Ball Attachment Analog for BBA
PC 8 & 12 - Plastic Cylinder 8 & 12 mm for OBA
PC-T - Titanium Cylinder for OBA
CPC - Conical Plastic Cylinder for CBA
CPC-T - Titanium Cylinder for CBA
FS 3, 8 & 12 - Fixation Screw 3, 8 & 12 mm for Detachable Bridge
1.8 Hex Tool For OBA, CBALHT
Long 1.8 Hex Tool LHT-L For OBA, CBA
SELF THREAD 3.30, 3.75 & LOGIC PLUS P r o s t he t i c E l em en t s
Over-Denture
Ball-Attachment
Surgical
Titanium Alloy
& Nylon Cap
W-BBA 0.5
W-BBA 2
W-BBA 4
W-BBA 6
0.5 mm
2 mm
4 mm
6 mm
Over-Denture
Ball Attachment
Nylon Cap NylonNC For W-BBA
Metal Housing Stainless steelMH For NC
Over-Denture
Base Abutment
Surgical
Titanium Alloy
W-OBA 3
W-OBA 5
3 mm
5 mm
Over Denture Bar
Attachment & Fixed
Detachable Bridge
Bridge Base
Abutment
Surgical
Titanium AlloyW-CBA 2
W-CBA 1
W-CBA 4
2 mm
1 mm
4 mm
Fixed Detachable
Bridge
Screw-in
Abutment
Surgical
Titanium Alloy
W-SCA 10 mm Fixed Detachable
Bridge
Anti-Rotation
Abutment
Surgical
Titanium Alloy
W-ACA 10 mm Fixed Cemented
Crown & Bridge
Wide Anti-Rotation
Abutment
Surgical
Titanium Alloy
W-ACA-P 10 mm Anatomic Abutment
for Esthetic Crown
Restoration
Esthetic Abutment Surgical
Titanium Alloy
W-ACA-E 1
W-ACA-E 2
W-ACA-E 3
W-ACA-E 4
7 mm
8 mm
9 mm
10 mm
Fix Cemented Crown &
Fixed Cemented Bridge
Gold Castable
Titanium Castable
Abutment
Abutment
Gold Base &
Titanium Base
Plastic Sleeve
& Plastic Sleeve
W-PGA
W-PTA
12 mm
12 mm
Retrievable Crown &
Retrievable Crown &
Castable Abutment
Castable Abutment
Plastic Castable Anti-
Rotation Abutment
Plastic
Abutment
Titanium Screw
W-PCA 10 mm Castable Abutment
for Cemented Crown
& Bridge / One Piece
Retrievable Crown
Zirconium Anti-Rotation
Abutment
Zirconium Cemented to
Titanium Abutment
Zirconium with
Titanium base
& Titanium
Screw
W-ZTA
W-ZTA-B
12 mm
12 mm
One Piece
Retrievable Crown
Abutment for
Cemented Crown &
Bridge
Full Anti-Rotation
Abutment
Surgical
Titanium Alloy
W-ACA-R 12 mm Castable Abutment
for Cemented Crown
& Bridge / One Piece
Retrievable Crown
Item MaterialCat No Length Application
S E L F T H RE A D 4.20 & 5.00 P r o s th e t i c E l emen t s
Modular ShoulderedAbutment
W-ACA-G-1W-ACA-G-2W-ACA-G-3W-ACA-G-4
1 mm2 mm3 mm4 mm
Surgical TitaniumAlloy
Fixed CementedBridge & Crown
Impression Transfer G-PT Plastic Closed TrayImpression
Comfort Cap G-HC Plastic For ACA-G
Analog GL Stainless Steel Abutment Analog
Castable Sleeve GC-R Plastic For Wax Up
Anti-Rotation Castable Sleeve
GC-F Plastic For Wax Up
M o d u l a r S h o u l d e r e d A b u t m e n t S y s t e m
U n i v e r s a l U n i t S y s t e m
Straight Abutment W-MU-1W-MU-2W-MU-3W-MU-4
1 mm2 mm3 mm4 mm
Surgical TitaniumAlloy
Fixed Detachable Bridge
25º Abutment W-MU-25 1.5 mm Surgical TitaniumAlloy
Fixed Detachable Bridge
MU-Comfort Cap MU-HC 2.5 mm Plastic CapTitanium Screw
Includes MU-S screw
MU-Castable Sleeve MU-PC 12 mm Plastic For Wax Up
MU-Titanium Sleeve MU-TPC 12mm Plastic For ProvisionalBridge
MU-Fixation Screw MU-FS 2.5mm Surgical TitaniumAlloy
Fixation Screw
MU-Closed ImpressionTransfer
MU-AAT Stainless Steel Closed TrayImpression
MU-Opened ImpressionTransfer
MU-AAT-L Stainless Steel Opened TrayImpression
MU-Analog MU-CL Stainless Steel Abutment Analog
MU-Tool-Hex MU-IT Stainless Steel For Hex Ratchet
MU-Tool-Square MU-IT-Q Stainless Steel For Square Ratchet
Item MaterialCat No Length Application
S E L F T H RE A D 4.20 & 5.00 P r o s the t i c E l em en t s
Item MaterialCat No Length Application
15° Angulated Abutment
25° Angulated Abutment
Surgical
Surgical
Titanium Alloy
Titanium Alloy
W-ANA 15
W-ANA 25
W-ANA 15 - E-1
W-ANA 15 - E-2
8 mm
8 mm
1 mm
2 mm
Fix Cemented Crown
Fix Cemented Crown
&
Fixed Cemented Bridge
Fixed Cemented Bridge
Shouldered Angulated
Abutment
15°
Item Cat No Application
1.25 mm Hex Tool for
Contra-Angle
1.25 mm Hex Tool
Long 1.25 Hex Tool
1.8 Hex Tool
Long 1.8 Hex Tool
SHT-C
SHT
SHT-L
LHT
LHT-L
For W-HC, W SCA, W-ACA, W-ANA,
W-BBA, FS, TS
For W-HC, W-SCA, W-ACA, W-ANA,
W-BBA, FS, TS
For W-HC, W-SCA, W-ACA, W-ANA,
W-BBA, FS, TS
For W-OBA, W-CBA
For W-OBA, W-CBA
P R O S T H E T I C T O O L S
CA S TA B L E P L A S T I C S L E E V E S & F I X AT I O N S CR E W S
A N A L O GS
I M P R E S S I O N T R A N S F E R S
W-AAT - Impression Transfer for Hex Lock Abutment Closed Tray
W-AAT-L - Impression Transfer for Hex Lock Abutment Open Tray
W-AST - Impression Transfer for Closed Tray with “SNAP CAP”
T-PT - Impression “SNAP CAP” for W-AST
TS - Transfer for Detachable Bridge on W-OBA & W-CBA.
W-IL - Implant Analog
BL - Abutment Analog for W-OBA
CL - Conical Abutment Analog for W-CBA
BNL - Ball Attachment Analog for W-BBA
PC 8 & 12 - Plastic Cylinder 8 & 12 mm for W-OBA
PC-T - Titanium Cylinder for W-OBA
CPC - Conical Plastic Cylinder for W-CBA
CPC-T - Titanium Cylinder for W-CBA
FS 3, 8 & 12 - Fixation Screw 3, 8 & 12 mm for Detachable Bridge
S E L F T H RE A D 4.20 & 5.00 P r o s th e t i c E l emen t s
15
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
LGI 4.3 - 8.5
LGI 4.3 - 10
LGI 4.3 - 11.5
LGI 4.3 - 13
LGI 4.3 - 16
Pre-Mounted ø 4.30
Titanium Integrated
Surface™ Self
Tapping Implant
8.5 mm
10 mm
11.5 mm
13 mm
16 mm
4.3 m m T i t a n i u m T h re a d I m p l a n t s L GI 4.30™
Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
5.0 m m T i t a n i u m T h re a d I m p l a n t s L GI 5.00™
8.5 mm
10 mm
11.5 mm
13 mm
16 mm
LGI 5.0 - 8.5
LGI 5.0 - 10
LGI 5.0 - 11.5
LGI 5.0 - 13
LGI 5.0 - 16
Pre-Mounted ø 5.0
Titanium Integrated
Surface™ Self
Tapping Implant
3.5 m m T i t a n i u m T h re a d I m p l a n t s L GI 3.50™
LGI 3.5 - 8.5
LGI 3.5 - 10
LGI 3.5 - 11.5
LGI 3.5 - 13
LGI 3.5 - 16
Pre-Mounted ø 3.50
Titanium Integrated
Surface™ Self
Tapping Implant
8.5 mm
10 mm
11.5 mm
13 mm
16 mm
Tap e red Th read Im p l an t sL O GI C™ I M P L A N T S
16
Su rg i c a l D r i l l s
After exposure of the bone penetrate the bone to the The GTD 3.65 mm internal irrigation drill completes
depth of 8 mm using a PD 2mm internal irrigation the preparation of the Logic 5.00 implant in soft
drill. bone. In case of dense bone, use the WTD 4.30 mm
internal irrigation drill to complete preparation.
X-rays can be taken with paralleling tool placed in
preparation to evaluate length and direction. Hold the implant mount and thread the implant into
the preparation site, continue using a Ratchet or Hex
Use FSD 2.50mm internal irrigation drill to achieve Screw Driver (HR, HSD) with adaptor (RAD) or
required depth. Insertion Tool (LIT-S, LIT-M) or LIT-C for contra angle.
Use NTD 2.80mm internal irrigation drill to complete Undo the connection screw using a 1.25 mm Hex Tool
the preparation for the Logic 3.50 implant in soft (SHT) and remove mount. If necessary use long
bone. In case of dense bone, the preparation should Insertion Tool (NL/SL-LIT) to continue screwing the
be enlarged with a STD 3.20 mm internal irrigation implant.
drill and CSD internal irrigation drill for cervical
preparation. Connect the cover screw or healing cap using the
1.25 Hex Tool (SHT).
The STD 3.20 mm internal irrigation drill completes
the preparation for the Logic 4.3 Implant in soft bone.
In case of dense bone, use the GTD 3.65 mm internal
irrigation drill to complete the preparation.
P l a ce m e n t o f L o g i c I m p l a n t s
Hard BoneSoft Bone
1.
2.
3.
4.
5.
6.
7.
8.
9.
L O GI C I n t e r n a l I r r i g a t i o n D r i l l S e q u e n ce
L O GI C™ I M P L A N T S
ø 2 mm
PD
ø 2.50 mm
FSD
ø 4.30 mm
WTD
ø 2.80 mm
NTD
ø 3.50 mm ø 3.65 mm
CSD GTDRB
ø 3.20 mm
STD
LGI 3.50
LGI 4.30
LGI 5.00
17
NL-HC 5 5 mm Healing Cap for LOGIC 3.5
NL-HC-F - Full Healing Cap for LOGIC 3.5
SL-HC-F - Full Healing Cap for LOGIC 4.3 & 5.0
NL-HC 3 - 3 mm Healing Cap for LOGIC 3.5
SL-HC- - 3 mm Healing Cap LOGIC 4.3 & 5.0
SL-HC- - 5 mm Healing Cap LOGIC 4.3 & 5.0
H E A L I N G CA P S
S U R GI CA L I N S T R U M E N TAT I O N
Su rg i c a l K i tL O GI C™ I M P L A N T S
HSD - Hex Screw Driver LIT-S - Short Insertion Tool for Mount
RAD - Hex to Square Adaptor LIT-C - Insertion Tool for Contra Angle
DL - Drill Extension SHT - 1.25 Hex Tool
PT - Paralleling Tool SHT-L - 1.25 Long Hex Tool
HR-TW Torque Wrench 10-35 Ncm SL-LIT-S/L - Short/Long Insertion
Tools for LGI 4.3 & 5.0
HR - Hex Ratchet NL-LIT-S/L - Short/Long Insertion
Tools for LGI 3.5
SHT-C - 1.25 Hex Tool for Contra AngleVS - Sleeve for disconnecting Mount
SL-PCAPlastic Castable
Abutment
SL-ZTAZirconium/Titan.
Abutment
SL-MUUniversal Unit
Abutment
NL-PCAPlastic Castable
Abutment
10 mm
NL-ZTAZirconium/Titan.
Abutment
12 mm
NL-MUUniversal Unit
Abutment
1,2,3,4 mm
SL-PGAGold Castable
Abutment
10 mm
12 mm
1,2,3,4 mm
12 mmNL-PGAGold Castable
Abutment
12 mm
18
P ro s th e t i c E l em en t s
L GI 3.5 L GI 4.3 & 5.0
Cat. No. Cat. No. Cat. No.Length Length LengthItem Item Item
SL-BBA - 2
SL-BBA - 4
SL-BBA - 6
Over-Denture
Ball-Attachment
NCNylon Cap
MHMetal Housing
SL-ACA - 1.5
SL-ACA - 2.5
SL-ACA - 3.5
SL-ACA - 4.5
Anti-Rotation
Abutment
SL-ANA - 1515 Angulated
Abutment
°
SL-AATImpression
Transfer
(Closed Tray)
SL-ILImplant
Analog
SL-AAT - LImpression
Transfer for
Open Tray
Over-Denture
Ball-Attachment
NL-BBA - 2
NL-BBA - 4
NL-BBA - 6
2 mm
4 mm
6 mm
Nylon Cap NC
Metal Housing MH
Anti-Rotation
Abutment
NL-ACA - 1.5
NL-ACA - 2.5
NL-ACA - 3.5
NL-ACA - 4.5
1.5 mm
2.5 mm
3.5 mm
4.5 mm
15 Angulated
Abutment
° NL-ANA - 15 1.5 mm
NL-AATImpression
Transfer
(Closed Tray)
Implant
Analog
NL-IL
SL-ASTImpression
Transfer for
Closed Tray
“SNAP CAP” T-PT
NL-ASTImpression
Transfer for
Closed Tray
“SNAP CAP” T-PT
Impression
Transfer for
Open Tray
NL-AAT - L
MU - Healing
CapMU-HC 2.5 mm
MU - Castable
Sleeve
MU-PC
MU - Titanium
Sleeve
MU-TPC
MU - Fixation
Screw
MU-FS
MU - Closed
Impression
Transfer
MU-AAT
MU - Opened
Impression
Transfer
MU-AAT-L
MU - Analog MU-CL
MU-ITMU -
Hex Tool
MU -
Square Tool
MU-IT-Q
UNIVERSAL UNIT
COMPONENTS & TOOLS
2 mm
4 mm
6 mm
1.5 mm
2.5 mm
3.5 mm
4.5 mm
1.5 mm
12 mm
12 mm
2.5 mm
L O GI C™ I M P L A N T S
19
VRI 4.3 - 8
VRI 4.3 - 10
VRI 4.3 - 13
VRI 4.3 - 16
Pre-Mounted ø 4.30
Pure Titanium Integrated
Surface™ Thread
Implant Including
Titanium Cover Screw
8 mm
10 mm
13 mm
16 mm
4.3m m T i t a n i u m T h re a d I m p l a n t s V R I 4.30
5.0 m m T i t a n i u m T h re a d I m p l a n t s V R I 5.00
8 mm
10 mm
13 mm
16 mm
VRI 5.0 - 8
VRI 5.0 - 10
VRI 5.0 - 13
VRI 5.0 - 16
Pre-Mounted ø 5.0
Pure Titanium Integrated
Surface™ Thread
Implant Including
Titanium Cover Screw
Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
VRI 3.5 - 8
VRI 3.5 - 10
VRI 3.5 - 13
VRI 3.5 - 16
Pre-Mounted ø 3.50
Pure Titanium Integrated
Surface™ Thread
Implant Including
Titanium Cover Screw
8 mm
10 mm
13 mm
16 mm
3.5 m m T i t a n i u m T h re a d I m p l a n t s V R I 3.50
Tap e red Th read I mp l an t sV I S I O N ™ I M P L A N T S
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
CSDWTD
ø 4.30
CSDGTD
ø 3.65
CSDSTD
ø 3.20
NTD
ø 2.80
FSD
ø 2.50
PD
ø 2.00
RB
20
P l a ce m e n t o f V i s i o n I m p l a n t s
V I S I O N ™ I M P L A N T S D R I L L S E Q U E N CE
VRI 3.50
VRI 4.30
VRI 5.00
After exposure of the bone penetrate the bone to the GTD 3.65 mm internal irrigation drill with WTD 4.3 mm
depth of 8 mm using a PD 2 mm internal irrigation drill. internal irrigation drill to depth of 8-10 mm complete
the preparation of the Vision 5.00 implant in soft bone.
X-rays can be taken with paralleling tool placed in In case of dense bone, the cervical preparation should
preparation to evaluate length and direction. be enlarged with full length of CSD internal irrigation
drill.
Use FSD 2.50 mm internal irrigation drill to achieve
required depth. Hold the implant mount and thread the implant into
the preparation site, continue using a Ratchet or Hex
NTD 2.80 mm internal irrigation drill with STD 3.20 mm Screw Driver (HR, HSD) with adaptor (RAD) or insertion
internal irrigation drill to depth of 8-10 mm completes tool (LIT-S, LIT-M) or LIT-C for contra angle.
the preparation for the Vision 3.50 implant in soft bone.
In case of dense bone the cervical preparation should be Undo the connection screw using a 1.25 mm Hex Tool
enlarged with CSD internal irrigation drill until first line (SHT) and remove mount. If necessary use long
of the drill. Insertion Tool (NV/RV/WV-LIT) to continue screwing the
implant.
STD 3.20 mm internal irrigation drill with GTD 3.65 mm
internal irrigation drill to depth of 8-10 mm complete Connect the cover screw or healing cap using the 1.25
the preparation of the Vision 4.3 Implant in soft bone. Hex Tool (SHT).
In case of dense bone the cervical preparation should be
enlarged until second line of CSD internal irrigation drill.
1. 6.
7.
8.
9.
2.
3.
4.
5.
Su rg i c a l D r i l l sV I S I O N ™ I M P L A N T S
Su rg i c a l K i tV I S I O N ™ I M P L A N T S
21
NV-HC - 5 mm Healing Cap for VISION 3.5
NV-HC 7 - 7 mm Healing Cap for VISION 3.5
NV-HC 3 - 3 mm Healing Cap for VISION 3.5
RV-HC-3 - 3 mm Healing Cap VISION 4.3
WV-HC-3 - 3 mm Healing Cap VISION 5.0
RV-HC-5 - 5 mm Healing Cap VISION 4.3
RV-HC-7 - 7 mm Healing Cap VISION 4.3
WV-HC-5 - 5 mm Healing Cap VISION 5.0
WV-HC-7 - 7 mm Healing Cap VISION 5.0
H E A L I N G CA P S
S U R GI CA L I N S T R U M E N TAT I O N
HSD - Hex Screw Driver
LIT-S - Short Insertion Tool for MountRAD - Hex to Square Adaptor
LIT-C - Insertion Tool for Contra Angle DL - Drill Extension
SHT - 1.25 Hex ToolPT - Paralleling Tool
SHT-L - 1.25 Long Hex Tool
HR-TW- Torque Wrench 10-35 Ncm
HR - Hex Ratchet
SHT-C - 1.25 Hex Tool for Contra Angle
RV-LIT-S/L - Short/Long Insertion
Tool for VRI 4.3
NV-LIT-S/L - Short/Long Insertion
Tool for VRI 3.5
WV-LIT-S/L - Short/Long Insertion
Tool for VRI 5.0
VS - Sleeve for disconnecting Mount
V I S I O N ™
Cat. No.Cat. No. Cat. No.ItemItem ItemLengthLength Length
22
V R I 3.5 V R I 4.3 V R I 5.0
U n i v e r s a l U n i t Co m p o n e n t s
NC NCNylon CapNylon CapNCNylon Cap
MH MHMetal HousingMetal HousingMHMetal Housing
RV-IL WV-ILImplant
Analog
Implant
Analog
NV-ILImplant
Analog
RV-AAT - L WV-AAT - LImpression
Transfer for
Open Tray
Impression
Transfer for
Open Tray
NV-AAT - LImpression
Transfer for
Open Tray
WV-BBA - 1
WV-BBA - 2
WV-BBA - 3
WV-BBA - 4
1 mm
2 mm
3 mm
4 mm
Over-Denture
Ball-Attachment
RV-BBA - 1
RV-BBA - 2
RV-BBA - 3
RV-BBA - 4
1 mm
2 mm
3 mm
4 mm
Over-Denture
Ball-Attachment
NV-BBA - 1
NV-BBA - 2
NV-BBA - 3
NV-BBA - 4
1 mm
2 mm
3 mm
4 mm
Over-Denture
Ball-Attachment
1.5 mmRV-ANA - 15 1.5 mmWV-ANA - 1515 Angulated
Abutment
°15 Angulated
Abutment
°1.5 mmNV-ANA - 1515 Angulated
Abutment
°
RV-AAT WV-AATImpression
Transfer for
Closed Tray
Impression
Transfer for
Closed Tray
NV-AATImpression
Transfer for
Closed Tray
RV-ASTImpression
Transfer for
Closed Tray
T-PT“SNAP CAP”
WV-AST
T-PT
Impression
Transfer for
Closed Tray
“SNAP CAP”
NV-ASTImpression
Transfer for
Closed Tray
T-PT“SNAP CAP”
Anti-Rotation
Abutment
1 mm2 mm3 mm4 mm
RV-ACA - 1
RV-ACA - 2
RV-ACA - 3
RV-ACA - 4
1 mm
2 mm
3 mm
4 mm
WV-ACA - 1
WV-ACA - 2
WV-ACA - 3
WV-ACA - 4
Anti-Rotation
Abutment
1 mm
2 mm
3 mm
4 mm
NV-ACA - 1
NV-ACA - 2
NV-ACA - 3
NV-ACA - 4
Anti-Rotation
Abutment
Plastic Castable
Abutment
(Round)
NV-PCA
NV-PCA-R RV-PCA-R WV-PCA-R
10 mm Plastic Castable
Abutment
(Round)
RV-PCA 10 mm Plastic Castable
Abutment
(Round)
WV-PCA 10 mm
Titanium
Castable
Abutment
NV-PTA 12 mm Titanium
Castable
Abutment
RV-PTA 12 mm Titanium
Castable
Abutment
WV-PTA 12 mm
Straight
Abutment
NV-MU 1,2,3,4 Straight
Abutment
RV-MU 1,2,3,4 Straight
Abutment
WV-MU 1,2,3,4
Item:
Cat. No.:
Length:
MU - HealingCap
MU-HC
2.5
MU - CastableSleeve
MU-PC
12
MU - TitaniumSleeve
MU-TPC
12
MU - FixationScrew
MU-FS
2.5
MU - ClosedImpression Transfer
MU-AAT
MU - OpenImpression Transfer
MU-AAT-L
MU - Analog
MU-CL MU-IT
MU -Hex Tool
MU -Square Tool
MU-IT-Q
9 14 13 20 20
P ro s the t i c E l em en t s
23
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
6 mm
8 mm
10 mm
11.5 mm
13 mm
S U M M I T ™ I M P L A N T S Ex t e r n a l H ex Th read I mp l an t s
3.75 m m T i t a n i u m T h re a d I m p l a n t s S u m m i t
4.10
3.75
4.20 m m T i t a n i u m T h re a d I m p l a n t s S u m m i t 4.20
4.10
4.20
5.00 mm Titanium Thread Implants Summit 5.00
4.10
5.00
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
Integrated SurfaceBTI 8-SR
BTI 10-SR
BTI 11.5-SR
BTI 13-SR
BTI 16-SR
Integrated SurfaceBGI 8-SR
BGI 10-SR
BGI 11.5-SR
BGI 13-SR
BGI 16-SR
Integrated SurfaceBWI 6-SR
BWI 8-SR
BWI 10-SR
BWI 11.5-SR
BWI 13-SR
Pre-Mounted ø 3.75 mm
Pure Titanium Integrated
Surface™ Self Tapping
Thread Implant Including
Titanium Cover Screw
Pre-Mounted ø 4.20 mm
Pure Titanium Integrated
Surface™ Self Tapping
Thread Implant Including
Titanium Cover Screw
Pre-Mounted ø 5.00 mm
Pure Titanium Integrated
Surface™ Self Tapping
Thread Implant Including
Titanium Cover Screw
24
SUMMIT™ IMPLANTS Su r g i c a l D r i l l s
SUMMIT™This feature is useful in minimizing crestal bone loss and allowing implant maximum effective length
Implants are designed with a 1mm non-thread collar
S U M M I T ™ 3.75, 4.20 & 5.00 - I n t e r n a l I r r i g a t i o n D r i l l S e q u e n ce
Summit 3.75
Summit 4.20
Summit 5.00
P l a ce m e n t o f S u m m i t I m p l a n t s
GTDPD FSD STD CSD WTDRB
ø 2 mm ø 2.50 mm ø 3.20 mm ø 3.65 mm ø 4.30 mm
After exposure of the bone, penetrate the bone The WTD 4.30 mm internal irrigation drill completes
depth of 8 mm. using a PD 2 mm Internal Irrigation preparation for SUMMIT 5.00, In case of dense bone
Drill. use Bone Tap W-BT for final preparation for SUMMIT
5.00.
X-ray’s can be taken with paralleling tool placed in
preparation to evaluate length and direction Hold the Implant mount and thread the implant into
the preparation site continue using a Rachet or Hex
Use FSD 2.50 mm internal irrigation drill to achieve Screw Driver (HR, HSD) with Adaptor (RAD) or
the required depth. Insertion Tool (LIT-S, LIT-M).
Use the STD 3.20 mm internal irrigation drill to widen Undo the connecting screw using a 1.25 mm Hex Tool
the full depth of the preparation. (SHT) and remove mount. If necessary use long
Insertion Tool (BIT-L) to continue screwing the implant.
The CSD Countersink drill is used to complete
preparation for SUMMIT 3.75. In case of dense bone Connect surgical cover screw using the 0.90 Hex Tool
use Bone Tap B-BT for final preparation for SUMMIT (MHT).
3.75.
The GTD 3.65 internal irrigation drill completes
preparation for SUMMIT 4.20, in case of dense bone
use Bone Tap G-BT for final preparation for SUMMIT
4.20.
to the1. 7.
8.
9.
10.
2.
3.
4.
5.
6.
25
S U M M I T ™ I M P L A N T S Su rg i c a l K i t
S U R GI CA L I N S T R U M E N TAT I O N
HR - Hex Ratchet
HR-S - Square Ratchet
HSD - Hex Screw Driver
RAD - Hex Square Adaptor
DL - Drill Extention
PT - Paralleling Tool
SHT - 1.25 Hex Tool
SHT L - 1.25 Long Hex Tool
MHT - 0.9 Hex Tool
MHT-L - 0.9 Long Hex Tool
BIT L - Long Insertion Tool
O P T I O N A L CO M P O N E N T S
B BT - Bone Tap for 3.75
G BT - BoneTap for 4.20
W BT - Bone Tap for 5.00
LIT S - Short Insertion Tool
LIT C - Insertion Tool for Contra Angle
SHT C - 1.25 Hex Tool for Contra Angle
LIT M - Medium Insertion Tool
H E A L I N G CA P S
B HC - 3 mm Healing Cap for External Hex Implants
B HC - 5 mm Healing Cap for External Hex Implants
HR-TW - Torque Wrench 10-35 Ncm
26
S U M M I T X T E R N A L H E X™ E P r o s th e t i c E l emen t s
Over-Denture
Ball-Attachment
Surgical
Titanium Alloy
& Nylon Cap
B-BBA 2
B-BBA 4
2 mm
4 mm
Over-Denture
Ball Attachment
Nylon Cap NylonNC For B-BBA
Metal Housing Stainless steelMH For NC
Over-Denture
Base Abutment
Surgical
Titanium Alloy
B-OBA 4
B-OBA 6
4 mm
6 mm
Over-Denture Bar
& Fixed Detachable
Bridge
Bridge Base
Abutment
Surgical
Titanium Alloy
B-CBA 2
B-CBA 4
2 mm
4 mm
Fixed Detachable
Bridge
Anti-Rotation
Two-Piece Abutment
Surgical
Titanium Alloy
B-ACA 8 mm Fixed Cemented
Crown & Bridge
Plastic Castable Anti-
Rotation Abutment
Plastic Sleeve &
Titanium Screw
UCLH 12 mm Retrievable Crown
Plastic Castable
Abutment
Plastic Sleeve &
Titanium Screw
UCLN 12 mm Retrievable Bridge
15° Angulated Abutment
25° Angulated Abutment
Surgical
Titanium Alloy
B-ANA 15
B-ANA 25
8 mm
8 mm
Fix Cemented Crown &
Fixed Cemented Bridge
Item MaterialCat No Length Application
27
I M P R E S S I O N T R A N S F E R S
A N A L O GS
CA S TA B L E P L A S T I C S L E E V E S F I X AT I O N S CR E W S
P R O S T H E T I C T O O L S
1.25 mm Hex Toolfor Contra-Angle
1.25 mm Hex Tool
Long 1.25 Hex Tool
1.8 Hex Tool
Long 1.8 Hex Tool
SHT-C
SHT
SHT L
LHT
LHT L
For B-HC, B-SCA, B-ACA, B-ANAB-BBA, FS, TS
For B-HC, B-SCA, B-ACA, B-ANAB-BBA, FS, TS
For B-HC, B-SCA, B-ACA, B-ANAB-BBA, FS, TS
For B-OBA, B-CBA
For B-OBA, B-CBA
P ro s th e t i c E l em en t s
B-SAT - Impression Transfer for Screw-In Abutment
B-AAT - Impression Transfer for Hex Lock Abutment Closed Tray
B-AAT-L - Impression Transfer for Hex Lock Abutment Open Tray
TS - Transfer for Detachable Bridge on B-OBA & B-CBA
B-IL - Implant Analog
BL - Abutment Analog for B-OBA
CL - Conical Abutment Analog for B-CBA
BNL - Ball Attachment Analog for B-BBA
PC 8 & 12 - Plastic Cylinder 8 & 12 mm for B-OBA
PC-T - Titanium Cylinder for B-OBA
CPC - Conical Plastic Cylinder for B-CBA
CPC-T - Titanium Cylinder for B-CBA
FS 3, 8 & 12 - Fixation Screw 3, 8 & 12 mm for Detachable Bridge
Cat. No.Item Application
S U M M I T X T E R N A L H E X™ E
28
T I T E F I T ™ I n t e r n a l O c t ag on 8° M or s e Tap e r I mp l an t s
3.30 m m T i t a n i u m T h re a d I m p l a n t s T i t e F i t 3.30
Length
4.10 m m T i t a n i u m T h re a d I m p l a n t s T i t e F i t 4.10
Length
4.80 m m T i t a n i u m T h re a d I m p l a n t s T i t e F i t 4.80
Length
Color Coding
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
8 mm
10 mm
12 mm
14 mm
8 mm
10 mm
12 mm
14 mm
8 mm
10 mm
12 mm
14 mm
NOI 8
NOI 10
NOI 12
NOI 14
TOI 8
TOI 10
TOI 12
TOI 14
WOI 8
WOI 10
WOI 12
WOI 14
ø 3.30 mm Pure Titanium
Integrated Surface™ Implant
ø 4.10 mm Pure Titanium
Integrated Surface™ Implant
ø 4.80 mm Pure Titanium
Integrated Surface™ Implant
ø 3.30 mm ø 4.10 mm ø 4.80 mm
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
- Implant Collar - 1.5 mm height remains above bone level
- Total Implant Length = Insertion depth plus 1.5 mm Implant collar
29
After exposure of the bone, penetrate the bone to the In case of dense bone for NOI implant use Bone Tap
depth of 8 mm. using a TF 2.0 mm internal irrigation T-BT 3.3 for TOI implant use Bone Tap T-BT 4.1, and
drill. for WOI implant use Bone Tap T-BT 4.8
X-ray’s can be taken with paralleling tool placed in Open vial, connect the Insertion Tool (ITL-S, ITL-M &
preparation to evaluate length and direction. ITL-L) to the implant mount and snap the implant out
of the container.
Use TF 2.0 mm internal irrigation drill to achieve the
required depth. Insert the implant, continue using a Hex Ratchet (HR)
or Hex Screw Driver (HSD)
The TF 2.80 mm internal irrigation drill completes the
preparation for the TITE FIT 3.30 implant. Stabilize the implant with the Counter Key (CTL)
release and remove the implant mount by counter-
The TF 3.50 mm internal irrigation drill completes the turning the Insertion Tool.
preparation for the TITE FIT 4.10 implant.
Connect the suitable Healing Cap (T-IS, T-HC-1.5,
The TF 4.20 mm internal irrigation drill completes T-HC-3, T-HC-4.5) using the 1.25 mm Hex Tool (SHT)
preparation for the TITE-FIT 4.80 implant.
Suture flap
T I T E F I T ™ I M P L A N T S Su rg i c a l D r i l l s
TITE-FIT™ Implants are designed with a 2 mm non-threaded polished collar, placed supra-crestal.
This feature is useful in preserving crestal bone, minimizing bone loss and allowing implant maximum
effective length. One stage procedure without compromising esthetics.
TITE-FIT™ - Internal Irrigation Dri l l Sequence
RB
ø 2 mm
1. 7.
2. 8.
3.
9.
4.
10.
5.
11.
6.
12.
TF 2.0
ø 2.80 mm
TF 2.80
ø 3.50 mm
TF 3.50
ø 4.20 mm
TF 4.20
P l a c e m e n t o f T i t e - F i t I m p l a n t s
Tite Fit 3.30
Tite Fit 4.10
Tite Fit 4.80
T I T E F I T ™ I M P L A N T S Su r g i c a l K i t
S U R GI CA L I N S T R U M E N TAT I O N
HR - Hex Ratchet
HSD - Hex Screw Driver
CTL - Counter Key
DL - Drill Extention
O P T I O N A L CO M P O N E N T S
H E A L I N G CA P S
30
T-BT-3.3 - Bone Tap for 3.30
T-BT-4.1 - Bone Tap for 4.10
PT - Paralleling Tool
SHT - 1.25 Hex Tool
SHT-L - 1.25 Long Hex Tool
ITL-S - Short Insertion Tool
ITL-M - Medium Insertion Tool
T-LIT - Octa Engaging Tool
ITL-L - Long Insertion Tool
T-BT-4.8 - Bone Tap for 4.80
T-BT-3.3-C - Contra Angle Bone Tap for 3.30
T-HC-1.5 - 1.5 mm Healing Cap for Tite Fit Implants
T-HC-3.0 - 3.0 mm Healing Cap for Tite Fit Implants
T-HC-4.5 - 4.5 mm Healing Cap for Tite Fit Implants
T-IS - Flat cover screw for Tite Fit Implants
SHT-C - 1.25 Hex Tool for Contra Angle
T-RS - Mount Removal ToolT-BT-4.1-C - Contra Angle Bone Tap for 4.10
T-BT-4.8-C - Contra Angle Bone Tap for 4.80
HR-TW - Torque Wrench 10-35 Ncm
31
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
TA P E R E D T I T E F I T ™ Internal Octagon 8 Morse Taper Implants°
3.70 mm Tapered Titanium Thread Implants: Tapered Tite Fit 3.70
Length
4.20 mm Tapered Titanium Thread Implants Tapered Tite Fit 4.20
Length
4.90 mm Tapered Titanium Thread Implants Tapered Tite Fit 4.90
Length
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
- Implant Collar - 1.5 mm height remains above bone level
- Total Implant Length = Insertion depth plus 1.5 mm Implant collar
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
8 mm
10 mm
11.5 mm
13 mm
16 mm
NFRNFR 8
NFR 10
NFR 11.5
NFR 13
NFR 16
TFRTFR 8
TFR 10
TFR 11.5
TFR 13
TFR 16
WFRWFR 8
WFR 10
WFR 11.5
WFR 13
WFR 16
ø 3.70 mm Titanium
Self Tapping Implant
ø 4.20 mm Titanium
Self Tapping Implant
ø 4.90 mm Titanium
Self Tapping Implant
Color Coding
ø 3.70 mm ø 4.20 mm ø 4.90 mm
32
TA P E R E D T I T E F I T ™
After exposure of the bone, penetrate the bone to In case of dense bone use Bone Taps S-BT-II for NFR
the depth of 8 mm using a PD 2.0 mm internal 3.70 Implant G-BT-II for TFR 4.20 implant, and for
irrigation drill. WFR 4.90 implant use Bone Tap W-BT-II
X-ray’s can be taken with paralleling tool placed in Open vial, connect the Insertion Tool (ITL-S, ITL-M, &
preparation to evaluate length and direction. ITL-L) to the implant mount and snap the implant out
of the container.
Use PD 2.0 mm and NTD 2.80 mm internal irrigation
drills to achieve the required depth. Insert the implant, continue using a Hex Ratchet (HR)
or Hex Screw Driver (HSD)
The STD 3.20 mm internal irrigation drill completes
the preparation for the TAPERED TITE FIT 3.70 implant Stabilize the implant with the Counter Key (CTL)
release and remove the implant mount by counter-
The GTD 3.60 mm internal irrigation drill. completes turning the Insertion Tool.
the preparation for the TAPERED TITE FIT 4.20
implant. Connect the suitable Healing Cap (T-IS, T-HC-1.5
T-HC-3, T-HC-4.5) using the 1.25 mm Hex Tool (SHT)
The WTD 4.30 mm internal irrigation drill completes
preparation for the TAPERED TITE-FIT 4.90 implant. Suture flap
CSD internal irrigation Counter Sink Drill is used for
sinking implant collar into the bone.
Ta p e r e d T i t e F i t - I n t e r n a l I r r i g at i o n D r i l l S e q u e n ce
P l a ce m e n t o f Ta p e r e d T i t e -F i t I m p l a n t s
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
NFR 3.70 ( )
( )
( )
TFR 4.20
WFR 4.90
ø 2 mm ø 2.80 mm ø 4.30 mmø 3.65 mmø 3.20 mm
PD NTD WTDGTDSTD CSDRB
Su rg i c a l D r i l l s
TA P E R E D T I T E F I T ™
33
S U R GI CA L I N S T R U M E N TAT I O N
HR - Hex Ratchet
HSD - Hex Screw Driver
CTL - Counter Key
DL - Drill Extention
O P T I O N A L CO M P O N E N T S
H E A L I N G CA P S
S-BT-II - Bone Tap for 3.70
G-BT-II - Bone Tap for 4.20
W-BT-II - Bone Tap for 4.20
SHT-C - 1.25 Hex Tool for
Contra Angle
T-RS - Mount Removal Tool
T-HC-1.5 - 1.5 mm Healing Cap for Tite Fit Implants T-IS - Flat cover screw for Tite Fit Implants
T-HC-3.0 - 3.0 mm Healing Cap for Tite Fit Implants
T-HC-4.5 - 4.5 mm Healing Cap for Tite Fit Implants
PT - Paralleling Tool
SHT - 1.25 Hex Tool
SHT-L - 1.25 Long Hex Tool
ITL-S - Short Insertion Tool
ITL-M - Medium Insertion Tool
ITL-L - Long Insertion Tool
HR-TW - Torque Wrench 10-35 Ncm
Su rg i c a l K i t
T-LIT - Octa Engaging Tool
Over-Denture
Ball-Attachment
Nylon Cap
Metal Housing
Octa Base Abutment
Base Abutment
Castable Plastic Cylinder
Castable Plastic Cylinder
for T-CBA
for T-OBA
Fixation Screw for T-OPC
Fixation Screw for T-PC
One Piece Screw-in
Abutment
Octa Two-Piece
Abutment
Wide Octa Two-Piece
Abutment
20° Octa Angulated
Abutment
Non Octa Castable
Abutment
Zirconium
Abutment
Surgical
Titanium Alloy
& Nylon Cap
Nylon
Stainless steel
Surgical
Surgical
Titanium Alloy
Titanium Alloy
Polycarbonate
Delarin
Surgical
Surgical
Titanium Alloy
Titanium Alloy
Surgical
Titanium Alloy
Surgical
Titanium Alloy
Surgical
Titanium Alloy
Surgical
Titanium Alloy
Castable
Plastic with
Titanium Screw
Zirconium
with Titanium
Octagon
T-BBA 1.2
T-BBA 2.5
T BBA 4
NC
MH
T-CBA
T-OBA
T-OPC
T-PC
T-FS
T-CA-S
T-SCA 4
T-SCA 5.5
T-SCA 7
T-ACA
T-ACA-P
T-ANA 20
T-PCA
T-ZTA
1.2 mm
2.5 mm
4 mm
4 mm
5.5 mm
7 mm
8 mm
8 mm
8 mm
P r o s th e t i c E l emen t s
Over-Denture
Ball Attachment
For T-BBA
For NC
Screw-Retained
Screw-Retained
Crown
Crown
Fixed Cemented
Bridge
Fixed Cemented
Crown & Bridge
Fixed Cemented
Crown & Bridge
Fixed Cemented
Crown, Screw
Retained Crown &
Bridge
Fixed Detachable
Bridge
Cemented &
Screw Retained
Crown
34
Item MaterialCat No Length Application
T I T E -F I T & TA P E R E D T I T E F I T ™
A N A L O GS
P R O S T H E T I C T O O L S
1.25 mm Hex Tool
Long 1.25 Hex Tool
SHT
SHT-L
For
T-BBA, T-FS
T-HC, T-SCA, T-ACA, T-ANA,
For
T-BBA, T-FS
T-HC, T-SCA, T-ACA, T-ANA,
I M P R E S S I O N T R A N S F E R
35
CA S TA B L E P L A S T I C S L E E V E S & F I X AT I O N S CR E W S
P ro s th e t i c E l emen t sT I T E -F I T & TA P E R E D T I T E F I T ™
T-NT - Impression Transfer for One-piece Screw in Abutment
T-PT - Impression Transfer for T-ACA Abutment
T-AAT - Closed Tray Impression Transfer for Octa Abutment
T-AAT-L - Open Tray Impression Transfer for Octa Abutment
T-IL - Implant Analog
T-AFL - Castable Plastic Sleeve for T-ANA 20
T-AF - Fixation Screw for T-AFL
T-SL - Castable Plastic Sleeve for T-SCA with Flat surface
T-SL-R - Castable Plastic Sleeve for T-SCA without Flat surface
T-PL - Castable Plastic Sleeve for T-ACA
T-PL-R - Castable Plastic Sleeve for T-ACA without Flat surface
T-AL 4, T-AL 5.5, T-AL 7 - Abutment Analog for T-SCA 4, T-SCA 5.5, T-SCA 7
Cat. No. ApplicationLength
T R X 2.80 m m I m p l a n t s
T R X 3.70 m m I m p l a n t s
Length
Length
T R X ™ I mmed i a t e Load i n g - Tr an s G i n g i v a l I mp l an t s
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
36
Cat. No.
Cat. No.
Item
Item
Length
Length
10 mm
13 mm
10 mm
13 mm
TRX 2.80 / 10 mm
TRX 2.80 / 13 mm
TRX 3.70 / 10 mm
TRX 3.70 / 13 mm
One Stage ø 2.80 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Stage ø 3.70 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
X-AAT - Closed Tray Impression Transfer
X-AAT-L - Open Tray Impression Transfer
X-SCA - Screw in Abutment
X-HPB - Anti Rotation Castable Sleeve for X SCA
X-CPB - Rotatable Castable Sleeve for X SCA
X-CPC - Conical Plastic Cylinder for screw retained work
X-HPC - Anti Rotation Plastic Cylinder for screw retained work
X-FS - Fixation Screw Cylinder for screw retained work
NC - Nylon Cap for Ball Attachment
MH - Metal Housing for Nylon Cap
X-HC - Healing Caps for TRX Implants
P R O S T H E T I CS
H E A L I N G CA P S
D R I L L S A N D S U R GI CA L I N S T R U M E N TAT I O N
-Drill used only in Dense bone - partial depth only.
XTL - Insertion Tool
SHT - 1.25 Hex Tool
HR - Hex Ratchet
X-BBA - Ball Attachment
X-IL - Implant Analog
T R X ™ Su rg i c a l I n s t r umen t s an d P ro s th e t i c E l emen t s
37
TRX 2.80
TRX 3.70
ø 3.20 mmø 2.50 mmø 2.20 mm ø 2.80 mm
STD 3.2FSD 2.5XTD 2.2 NTD 2.8
TRX-TP 2.40 mm Implants
TRX-TP 2.80 mm Implants
TRX-BA 2.80 mm Implants
TRX-TP 3.30 mm Implants
TRX-BA 3.30 mm Implants
2 42 8
2 8
Length
Length
T R X -B A O n e P i e ce - B a l l A t t a ch m e n t I m p l a n t s
T R X -T P Tw o P i e ce - B a l l A t t a ch m e n t I m p l a n t s
T R X -T P & T R X -B A Tr an s G i n g i v a l I mp l an t s
Cat. No.
Cat. No.
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Item
Item
Length
Length
Length
Length
Length
10 mm
13 mm
10 mm
13 mm
10 mm
13 mm
10 mm
13 mm
10 mm
13 mm
TRX-TP 2.40 / 10 mm
TRX-TP 2.40 / 13 mm
TRX-TP 2.80 / 10 mm
TRX-TP 2.80 / 13 mm
TRX-TP 3.30 / 10 mm
TRX-TP 3.30 / 13 mm
TRX-BA 2.80 / 10 mm
TRX-BA 2.80 / 13 mm
TRX-BA 3.30 / 10 mm
TRX-BA 3.30 / 13 mm
One Stage ø 2.40 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Stage ø 2.80 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Stage ø 3.30 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Stage ø 2.80 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Stage ø 3.30 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
38
D R I L L S A N D S U R GI CA L I N S T R U M E N TAT I O N
SHT - 1.25 Hex Tool
P R O S T H E T I CS F O R T R X -T P & T R X -B A
TC - Nylon Coping for Impression
ATL - Implant Analog
NC- Nylon Cap
MH - Metal Housing for Nylon Cap
HR - Hex Ratchet
TIT-S - Short Insertion Tool
for TRI, TRI-N
TIT-L - Long Insertion Tool
for TRI, TRI-N
XTR - Mount Removal Tool
TP-BA 0.5 - 0.5 mm high Ball Attachment for TRX-TP
TP-BA 1.5 - 1.5 mm high Ball Attachment for TRX-TP
TP-SCA - Abutment for cemented crown on TRX-TP
TP-CPC - Plastic for screw retained work on TRX-TP
Surgical Instruments and Prosthetic Elements
39
TRX-TP 2.40
TRX-TP 2.80
TRX-TP 3.30
TRX-BA 2.80
TRX-BA 3.30
ø 2.80 mmø 2.50 mmø 2.20 mmø 2.00 mm
NTD 2.8FSD 2.5XTD 2.2PD
-Drill used only in Dense bone - partial depth only.
T R X -T P & T R X -B A
T R X -O P 2.80 m m I m p l a n t s
T R X -O P 3.70 m m I m p l a n t s
Length
Length
T R X -O P 4.50 m m I m p l a n t s
Length
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
T R X O P ™ O n e p i e ce - I mmed i a t e Lo ad i n g I mp l an t s
Cat. No.
Cat. No.
Cat. No.
Item
Item
Item
Length
Length
Length
10 mm
13 mm
10 mm
13 mm
10 mm
13 mm
TRX-OP 2.80 / 10 mm
TRX-OP 2.80 / 13 mm
TRX-OP 3.70 / 10 mm
TRX-OP 3.70 / 13 mm
TRX-OP 4.50 / 10 mm
TRX-OP 4.50 / 13 mm
One Piece ø 2.80 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Piece ø 3.70 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
One Piece ø 4.50 mm
Titanium Integrated
Surface™ Self Tapping
Thread Implant
40
OP-TC - Nylon Coping for Impression and Crown Fabrication for TRX-OP 2.8 & TRX-OP 3.7
LP-TC Nylon Coping for Impression and Crown Fabrication for TRX-OP 4.5
LP-S - Nylon Coping for Impression and Crown Fabrication with Square for TRX-OP 4.5
LP-R - Nylon Coping for Impression and Crown Fabrication without Square for TRX-OP 4.5
OP-IL - Implant Analog for TRX-OP 2.8 & TRX-OP 3.7
LP-IL - Implant Analog for TRX-OP 4.5
OP-HC - Healing Cap for TRX-OP 2.8 & TRX-OP 3.7
LP-HC - Healing Cap for TRX-OP 4.5
P R O S T H E T I CS
H E A L I N G CA P S
XOT-S - Short Insertion Tool
for TRX-OP 2.8 & 3.7
XOT-L - Long Insertion Tool
for TRX-OP 2.8 & 3.7
HR - Hex Ratchet
TIT-S - Short Insertion Tool
for TRX-OP 4.5
TIT-L - Long Insertion Tool
for TRX-OP 4.5
XTR - Mount Removal Tool
D R I L L S A N D S U R GI CA L I N S T R U M E N TAT I O N
T R X - O P ™ Su rg i c a l I n s t r umen t s an d P ro s th e t i c E l emen t s
TRX-OP 2.80
TRX-OP 3.70
TRX-OP 4.50
ø 2.50 mmø 2.20 mm
FSD 2.5XTD 2.2
-Drill used only in Dense bone - partial depth only.
41
ø 3.20 mm ø 3.65 mmø 2.80 mm
STD 3.2 GTD 3.65NTD 2.8
T R I -N ™ O n e P i e ce M i n i I m p l a n t f o r Cro w n & B r i d g e
T R I O n e P i e ce B a l l A t t a ch m e n t M i n i I m p l a n t s f o r S t a b i l i z i n g D e n t u re s
Length
Length
42
- Integrated Surface™ - Large Grit Sand Blasted & Acid Etched
T R I ™ & T R I -N ™ M i n i I mp l an t s
Cat. No.
Cat. No.
Item
Item
Length
Length
10 mm
13 mm
11.5 mm
13 mm
Long Term Implant
Integrated Surface™
Long Term Implant
Integrated Surface™
Transition Implant
Machined Surface
Transition Implant
Machined Surface
TRI-N-10-SR
TRI-N-13-SR
TRI-11.5-SR
TRI-13-SR
TRI-N-10
TRI-N-13
TRI-11.5
TRI-13
Pre-Mounted ø 2.40 mm
Titanium Self Tapping
Thread Implant
Pre-Mounted ø 2.40 mm
Titanium Self Tapping
Thread Implant
TC-N - Nylon Coping for Impression and Crown Fabrication
ANL - Implant Analog
P R O S T H E T I CS F O R T R I -N
HR - Hex Ratchet
HR-S - Square Ratchet
TIT-S - Short Insertion Tool
for TRI, TRI-N
TIT-L - Long Insertion Tool
for TRI, TRI-N
XTR - Mount Removal Tool
D R I L L S A N D S U R GI CA L I N S T R U M E N TAT I O N
P R O S T H E T I CS F O R T R I
TC - Nylon Coping for Impression
ATL - Implant Analog
NC - Nylon Cap
MH - Metal Housing for Nylon Cap
43
Su rg i c a l I n s t r umen t s an d P ro s th e t i c E l emen t s
TRI
TRI-N
ø 2.00 mm
PD
T R I ™ & T R I -N ™
Orthodontic Implant with The Multi Function Head:
Cross slot bracket design for 0.025 wire
0.7 mm diameter hole for round wire
0.7 mm slot for elastic band or connecting wire
Length
T R I -O R M U LT I F U N CT I O N O R T H O D O N T I C I M P L A N T
S U R GI CA L I N S T R U M E N TAT I O N
Grade 5 Titanium
Grade 5 Titanium
Grade 5 Titanium
Grade 5 Titanium
HR - Hex Ratchet
HSD - Hex Screw Driver
ORT - Insertion Tool
T R I -O R ™ M ul t i Fu nc t i on O r th od o n t i c I mp l an t s
Cat. No. Drill MaterialLengthDiameter
1.3 mm
1.3 mm
1.8 mm
1.8 mm
6 mm
10 mm
6 mm
10 mm
TRI-OR 1.3-6
TRI-OR 1.3-10
TRI-OR 1.8-6
TRI-OR 1.8-10
ORD 0.9-6
ORD 0.9-10
ORD 1.2-6
ORD 1.2-10
44
45
Su rg i c a l K i tT R X ™ & T R I ™
D E P T H CO N T R O L S Y S T E M
For use with Implants Systems:Tapered Self Thread, Logic Plus, Logic, Vision, Summit, Tapered Tite Fit, TRX & TRI.
Sterilization Box & Surgical Kit for TRX & TRI Implants.
The set consists of 4 rings of various lengths
for each diameter of drill.
The rings “click” onto the drill and determine
the depth of the drilling.
Drilling depths: 8 mm, 10 mm, 11.5 mm,
13 mm & 16 mm.
Suction Tip (not included)
Suction Adapter (not included)
Disposable Bone Trap
Sterile Bone Trap - completely disposable - no cleaning or sterilization required.
Throw away at the end of the usage.
Large filtration surface - collects more bone that any other bone collector
Adaptors available for all suction systems:
ADP 11 - for 11 mm dental suction system
ADP 16 - for 16 mm dental suction system
ADP Tube - for surgical tube suction system
30 Ncm is used for the accurate tightening
of most prosthetic components to the correct torque, minimizing
the risk of screw loosening.
HI-TEC - 1.25 mm Hex Tool - SHT fits the Torque Wrench
for tightening of prosthetic components.
HI-TEC 2.5 mm Hex Insertion Tool - LIT can be used
with the Torque Wrench to confirm that implants are secured
in the bone with not less then 30 Ncm.
D I S P O S A B L E B O N E T R A P
H I T E C T O R Q U E W R E N CH
Disposable Bone Trap
supplied in individual
sterile package
Collects bone chips during implant surgery for transplant into bone defects
Adjustable Torque Wrench
Torque Wrench - adjustable from 10 Ncm to 35 Ncm and full ratchet postion.
SHT-S - Short 1.25 mm Hex Tool
LIT-L - Long Insertion Tool
LIT-M - Medium Insertion Tool
LIT-S - Short Insertion Tool
46
Warranty
Hi-Tec Implants maintains the supreme quality of its products and warrants it's products to be free from defects in
material and workmanship. However, should the customer find fault with any product of
Hi-Tec Implants, the defective product will be replaced. No other warranty is expressed or applied.
The products should be used only by qualified personnel with appropriate and adequate training. All risks and
liabilities resulting from the use of the products either separately or in combination with other manufacturers
components are assumed by the purchaser.
Artificial practice bone for training - model of Mandible
Cot No. MPB
Ad
om
# H
15
_0
5_ve
r01
_en
HI-TEC IMPLANTS LTD
20 Galgalei Plada Str.
P.O.Box 2022 Herzlia 46722, Israel
Tel: +972-9-9587775, Fax: +972-9-9582713
E-mail: [email protected], Web site: www.hitec-implants.com