Hi-lume Premier 0.1% EcoSystem / 3-wire LED Driver with ...

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0)

® SPECIF ICAT ION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Architectural Dimming

369883d 1 04.19.17

The Hi-lume Premier 0.1% Constant Voltage Driver (L3D0) is a high-performance LED driver capable of controlling up to 96 W of 24 V- constant voltage loads. This driver provides smooth and continuous dimming down to 0.1% low-end. It is ideal for use with strip lighting in applications such as coves, under or over cabinet lighting and pathway lighting. The driver is UL® Listed with an integrated wiring compartment and can be mounted up to 150 ft (45 m) away from the load.

Features•Continuous,flicker-freedimmingfrom100%to0.1%1.•Soft-on,Fade-to-Black operationforEcoSystem

controls: fades smoothly between 0% and 0.1% when turnedonandoffforanincandescentlikeexperience.2

•PWMdimmingmeetsIEEE1789overtheentiredimming range.

•UL®ListedforUnitedStatesandCanada(cULus®).•NOMcertifiedforMexico.•FieldAdjustmentKnobofferscustomerlow-endlightoutputtuningforbetterfixture-to-fixturematching.

•GuaranteeddimmingperformancewhenusedwithLutron controls:

–HomeWorksQS,EnergiSavrNodeunitswithEcoSystem controls,GRAFIKEyeQSwithEcoSystem controls,PowPakwithEcoSystem dimmingmodules,PowPakwithEcoSystem wireless fixturecontrols,andQuantumsystems,allowingforintegrationintoaplannedorexistingEcoSystemlighting control solution.

– Lutron 3-wire controls and interfaces.•Protectedfrommiswiresofinputpower,upto277V~, toEcoSystemcontrolinputs...

•Ratedlifetimeof50,000hoursat40°C(104°F)ambienttemperatureandmaximumloading.

•FCCPart15compliantforcommercialapplicationsat120–277 V ~ and residential applications at 120 V ~.

•Inrushlimitingallowsfullloadingofcircuitbreakerswithout nuisance tripping.

1 Lightoutputat0.1%dependsoninstallationandlightengineefficacy.2 Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols.

Hi-lume Premier 0.1% EcoSystem / 3-wire Constant Voltage 24 V- LED Driver with Soft-on, Fade-to-Black

•100%end-of-lineperformancetestedataLutronfactory.

•RoHScompliant.•Restoresallsettingsafterpowerfailure.•BarrierprovidedforClass2separationinthewiring

compartment.•Redundantconnectionsonlineandcontrolterminals

for easy daisy chain wiring.•Redundantconnectionsonoutputterminalsallowfor

easy wiring of two LED load home runs.

•Class2outputdesignedtowithstandhotswap.•Formoreinformationpleasevisit:www.lutron.com

Hi-lume Premier 0.1% Constant Voltage Driver (L3D0) 5.5in(140mm)Wx2.0in(51mm)Hx10.5in(267mm)L

lutron.com



Job Name:

Job Number:

Model Numbers:


369883d 2 04.19.17

Specifications

Regulatory Approvals and Compliance

•LutronQualitySystemsregisteredtoISO9001.2008•ManufacturingfacilitiesemployESDreduction

practices that comply with the requirements of ANSI/ESDS20.20

•MeetsANSIC62.41categoryAsurgeprotectionstandardsuptoandincluding4kV

•FCCPart15compliantforcommercialapplicationsat120 V~ to 277 V~ and residential applications at 120 V~

•MeetsUL®8750/CSAC22.2No.250.13-14,“LightEmittingDiode(LED)EquipmentForUseinLightingProducts”

•NOMcertified•Class 2 output; meets UL®1310/CSAC22.2No.223-M91

Performance

•DimmingRange:100%to0.1%1

•LEDlightingturnsontoanydimmedlevelwithoutflashingtofullbrightness

•OperatingVoltage:120V~ to 277 V~at50/60Hz•Ratedlifetimeof50,000hoursat40°C(104°F)ambienttemperatureandmaximumloading

•Forratedwarranty,ambienttemperature(ta) not to exceed40°C (104°F)(maximumratedtemperature)2, 3

•Patentedthermalfoldbackprotection•Non-volatilememoryrestoresalldriversettingsafter

power failure•Typicalstandbypowerconsumption:0.25Wat

120 V~ and 0.4 W at 277 V~

•Open-circuitprotectedoutput•Short-circuitandoverload-protectedoutput•Output:24V- constant voltage at high-end•OutputLoadRange:2Wto96Wathigh-end•PWMdimmingfrequency:meetsIEEE1789atall

dim levels•PowerFactor:>0.90atmaximumpower•TotalHarmonicDistortion(THD):<20%at maximumpower

Performance (continued)

•NEMA410–2011compliant•InrushCurrentLimitingCircuitry:decreasescircuitbreakertripping,switcharcingandrelayfailure;allowsfull loading of switch leg

•InrushCurrent:<2A•Deviceturn-ontime:<100msfromelectronicoffand,<500msfrompoweroff

•Meetsall"SolidStateElectricalPerformanceRequirements"(Section11)inEnergyStar® for Luminaires Version 2.0

•L3D0-96W24V-UdriverisprogrammedbyLutronmanufacturingandisNOTconfigurablebytheLutronQwikFigconfigurationsystem

Environmental

•Soundrated:ClassAinaudiblein24dBAambient

•RelativeHumidity:maximum90%non-condensing

•MinimumOperatingAmbientTemperature:ta=0°C(32°F)3

•Indooruseonly

•Ratedfordryanddamplocations

•MeetsNEC®requirementsforinstallationin“otherspaceusedforenvironmentalair”4

•MeetstheCanadianNationalBuildingCodePlenumRequirementsforaconcealedspaceusedasaplenumwithinafloororroofassembly

•Maximumheatoutputofmodule:46BTU/hour

1 Lightoutputat0.1%dependsoninstallationandlightengineefficacy.2 Tomaintainwarranty,installerisresponsibleforensuringthatthedriverambienttemperaturedoesnotexceed40ºC(104ºF).3 Where ta is the temperature of the air directly surrounding the driver.4 Additionalconsiderationsmayberequiredbasedonstateandlocalcodesandstandards.



Job Name:

Job Number:

Model Numbers:


369883d 3 04.19.17

Specifications (continued)

Driver Wiring and Mounting

Forbestinstallationpractices,pleaserefertoApplicationNote#591atwww.lutron.com.

•Mountthedriverinapositionwhereitcanbeeasilylocated and accessed if service or troubleshooting is necessary.

•Driverisgroundedbyterminalconnection•Terminalblocksonthedriveracceptsolidorstrandedwireperterminalfrom20AWGto12AWG(0.50mm2 to 2.5 mm2).

•MaximumwirelengthbetweentheLEDdriverandthestartofthelinearstripfordifferentwiresizesislistedbelow. The table below can be used independently of the line voltage that is powering the LED Driver.

Wire Gauge Maximum Lead Length

24AWG(0.20mm2)* 6 ft (1.8 m)22AWG(0.34mm2)* 10 ft (3.0 m)20AWG(0.50mm2) 15 ft (4.5 m)18AWG(0.75mm2) 25 ft (7.62 m)16AWG(1.0mm2) 40 ft (12.2 m)14AWG(1.5mm2) 60 ft (18.3 m)12AWG(2.5mm2) 100 ft (30.5 m)10AWG(4.0mm2)* 150 ft (45.7 m)

* Tousewiregaugelargerorsmallerthanterminalblocks’ratedgaugeof20AWGto12AWG(0.50mm2 to 2.5 mm2), connect 1 ft (0.3 m) or less of rated wire from terminal and connect with larger or smaller wire.

TerminalBlockDetails

LED(-)

LED(+)

E1/DA1

E2/DA2 L DH N D



Job Name:

Job Number:

Model Numbers:


369883d 4 04.19.17

Models Available

ModelInput Voltage (V~)

Input Current1 (A)

Typical Power Factor1

Typical THD1 (%)

Output Power (W)

Output Voltage1 (V-)

3-Wire or EcoSystem Control 2

For 24 V- Constant Voltage LED Loads

L3D0-96W24V-U120 0.92 0.99 8 2 – 96 24

277 0.40 0.94 13 2 – 96 24

1 Atmaximumoutputpower.2 Forwiringoptions,seeWiring section, pages 9-11.

NOTE:Specificationsaresubjecttochangewithoutnotice.

Output Voltage vs. Output Power

Output Power (W)

Output Power (W)Output Power (W)

Out

put

Vo

ltag

e (V

)T

HD

Effi

cien

cy

0

0

10

10

20

20

30

30

40

40

50

50

60

60

70

70

80

80

90

90

100

100

23.0

22.5

22.0

21.5

21.0

20.5

20.0

23.5

24.0

24.5

25.0

25.5

26.0

120 V~Key: 277 V~

120 V~Key: 277 V~120 V~Key: 277 V~

THD vs. Output PowerEfficiency vs. Output Power

10%

5%

0%

15%

20%

25%

30%

0 10 20 30 40 50 60 70 80 90 100

60

50

40

30

70

80

90

100

Output Power (W)

Pow

er F

acto

r

120 V~Key: 277 V~

Power Factor vs. Output Power

0 10 20 30 40 50 60 70 80 90 100

0.60

0.50

0.40

0.30

0.70

0.80

0.90

1.00

ShadedareameetstheperformancecriteriaoftheENERGYSTARRLuminairesV2.0Specification



Job Name:

Job Number:

Model Numbers:


369883d 5 04.19.17

50016452a

lutron.com

0 784276 166027

120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max

Soft-on, Fade-to-BlackTMEcoSystemTM 3-wire Constant Voltage LED Driver

LED Driver 4RM5

L3D0-96W24V-U

Allumage doux, fondu au noirEcoSystemTM Pilote 3-fil tension constante pour DELUSA / Canada: 1.844.LUTRON1 (1.844.588.7661)Input | Entrée:

Output | Sortie:24 V 4 A Max Class 2

B2

Warranty void if inner plastic cover is removed.Garantie annulée si le couvercle plastique intérieur est ouvert.

Field Adjustment KnobBouton de Réglage pour utilisation en chantier

Hi-lume® Premier 0.1%

Suitable for damp locations.Convient aux emplacements humides.

Use 20 - 12 AWG wire only.Utiliser un fil de 0,50 - 2,5 mm² seulement.

WARNING: Shock hazard. May result in serious injury or death.

Disconnect power before opening top lid, servicing or installing.

AVERTISSEMENT : Danger d'électrocution. Peut causer de graves

lésions ou le décès de la personne. Couper l’alimentation du

disjoncteur avant de procéder à l’ouverture de couvercle supérieur,

au montage ou à l’entretien de l’installation.

Pats | Brevets: 7,911,156

Lid screws: 8-32 x 3/8” thread-rolling, serratedVis du couvercle: 8-32 x 3/8” roulage de filets, dentelées

1/4 in (6,5 mm)

Cu Al

Enclosure DimensionsMeasurementsareshownas:in(mm)

Knockouts•Sides –4locations:1/2inor21mmtradesize

•Top –2locations:1/2inor21mmtradesize10.5 (267)

2.0 (51)

5.5 (140)



Job Name:

Job Number:

Model Numbers:


369883d 6 04.19.17

Mounting Options 1,2

1 Anyothermountingconfigurationwillrequireadditionalmechanicalsupport.Improperinstallationmayresultinhazardstopersonnelorproperty.2 Mountthedriverinapositionwhereitcanbeeasilylocatedandaccessedifserviceortroubleshootingisnecessary.

Mounting Surface



Job Name:

Job Number:

Model Numbers:


369883d 7 04.19.17

Barrier Installation and Driver Spacing RequirementsMeasurementsareshownas:in(mm)

• OptionalbarriercanbeplacedeitherbetweentheinputandEcoSystemcontrolterminals (Option 1)whentheEcoSystemlinksarewiredasClass2orbetweentheEcoSystemcontrolandoutputterminals(Option 2)whentheEcoSystemlinksarewired as Class 1.

• For3-wirecontrol,barriercouldbeplacedineither location.

• TheEcoSystemdigitallinkmaybewiredas Class 1 or Class 2. Please refer to ApplicationNote#142atwww.lutron.com.

• Maintainaminimumof3.0in(76mm)betweenany two Hi-lume Premier 0.1% drivers.

Option 1 Option 2

3.375 (86)

≥ 3.0 (76)

Barrier

≥ 3.0 (76)

BarrierBarrier

Output EcoSystemControl

Input Output Input

Output Input

EcoSystemControl

EcoSystemControl



Job Name:

Job Number:

Model Numbers:


369883d 8 04.19.17

Control Mounting Options (continued)APowPakWirelessFixtureControlcanbemountedonthedriverusingthedriver'savailableknockouts.Additionalconsiderations may be required based on state and local codes and standards.

Suitable for damp locations. Convient aux emplacements humides.

USA / Canada: 1.844.LUTRON1 (1.844.588.7661)

Pats. | Brevets: 7,911,156

L3D0-96W24V-U

4 A Max Class 2Output | Sortie: 24 V-

0,92 - 0,40 A

Input | Entrée:

110 W Max50 / 60 Hz120 - 277 V~

50016452a

lutron.com

Bouton de Réglage pour utilisation en chantier

Field Adjustment Knob

Use 20 - 12 AWG wire only. Utiliser un fil 0,50 - 2,5 mm2 seulement.

Warranty void if inner plastic cover is removed.Garantie annulée si le couvercle plastique intérieur est ouvert.

B2

LISTED

LED Driver 4RM5

Hi-lume® Premier 0.1%

WARNING: Shock hazard. May result in serious injury or death. Disconnect power before opening top lid, servicing or installing.

AVERTISSEMENT : Danger d'électrocution. Peut causer de graveslésions ou le décès de la personne. Couper l’alimentation du disjoncteur avant de procéder à l’ouverture de couvercle supérieur,au montage ou à l’entretien de l’installation.

Lid screws: 8-32 x 3/8” thread-rolling, serratedVis du couvercle : 8-32 x 3/8” roulage de filets, dentelées

Cu Al

1/4 in (6,5 mm)

Soft-on, Fade-to-Black™

EcoSystem™ / 3-wire Constant Voltage LED Driver

Allumage doux, fondu au noirEcoSystem™ pilote 3-fil tension constante pour DEL

1 Thewirelessfixturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustingthelow-endlightlevel,refertoApplicationNote#556atwww.lutron.com,call1.877.346.5338(U.S.A.andCanadaonly),[email protected]

Hi-lume Premier 0.1% Constant Voltage Driver ModelL3D0-96W24V-U

PowPakDimmingModuleModelRMJ-ECO32-DV-B

ORPowPakFixtureControl1ModelFCJ-ECO,FCJS-ECO

Pico Wireless ControlModelPJ2-3BRL-GWH-L01



Job Name:

Job Number:

Model Numbers:


369883d 9 04.19.17

Wiring

L3D Models: 3-Wire Controls (third wire required for control signal) Wiring Diagram

Compatible Controls without Soft-on, Fade-to-Black dimming technology: Lutron 3-Wire Controls5

Guaranteedperformancespecificationswiththecontrolslistedinthechartbelow.Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanadaonly) or [email protected]

ProductModel Number Drivers per Control 2

Load Type Low-end Trim Setting120 V~ 277 V~ 120 V~ 277 V~

NovaT* dimmerNTF-10- NTF-10-277- 1 –16 1 – 19 — —NTF-103P- NTF-103P-277- 1 – 8 1 – 14 — —

NovadimmerNF-10- NF-10-277- 1 – 16 1 – 19 — —NF-103P- NF-103P-277- 1 – 8 1 – 14 — —

SkylarkdimmerSF-10P- SF-12P-277- 1 – 8 1 – 14 — —SF-103P- SF-12P-277-3- 1 – 8 1 – 14 — —

Diva dimmerDVF-103P- DVF-103P-277- 1 – 8 1 – 14 — —DVSCF-103P- DVSCF-103P-277- 1 – 8 1 – 14 — —

Ariadnidimmer AYF-103P- AYF-103P-277- 1 – 8 1 – 14 — —

MaestrodimmerMAF-6AM- MAF-6AM-277- 1 – 6 1 – 14 — —

MSCF-6AM- MSCF-6AM-277- 1 – 6 1 – 14 — —MaestroWirelessdimmer MRF2-F6AN-DV- 1 – 6 1 – 14 — —

RadioRA2dimmer RRD-F6AN-DV- 1 – 6 1 – 14 Dual voltage 3-wire dimmer 21% 4

HomeWorksQSdimmer HQRD-F6AN-DV- 1 – 6 1 – 14 Fluorescent3-wireLED 3-wire 21% 4

Interfaces 3

PHPM-3F-120- — 1 – 16 – — —

PHPM-3F-DV-1 – 16 1 – 38 — —

1 – 16 1 – 38 — —

BCI-0-10 1 – 16 1 – 38 — —GPdimmingpanels Various 1 – 16 1 – 38 2-1 —

1 ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.2 Noderatingrequiredinmulti-gangapplicationsprovidedthatthefixture-countdoesnotexceedthequantitylisted.3 Pleaserefertointerfacespecificationsheetforcompatiblesystemlist.4 Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level

couldbeusedtoavoiddeadtravelbutmightresultin>0.1%dimlevel.5 Soft-on,Fade-to-Blackdimmingtechnologyisnotavailablefor3-wirecontrols. Note:ForinformationaboutLegacyproductuseinexistingcontrolapplications,[email protected]

Lutron 3-Wire Dimmer/

Module/Panel Hi-lume Premier

0.1 % Constant Voltage

LED Driver

LED Light Engine

Dimmed Hot (DH)

Line/HotLED + 1

LED – 1Neutral(N)

Neutral

Neutral Ground

Ground

SwitchedLine/Hot(L)

To line voltage



Job Name:

Job Number:

Model Numbers:


369883d 10 04.19.17

Wiring (continued)

L3D Models: EcoSystem Digital Controls

Compatible Controls with Soft-on, Fade-to-Black dimming technology: Lutron EcoSystem Digital ControlsGuaranteedperformancespecificationswiththecontrolslistedinthechartbelow.Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1.877.346.5338(U.S.A.andCanadaonly) or [email protected]

ProductModel Number Recommended

System Version3 Drivers per Control120 V~ 277 V~

PowPakDimmingModulewithEcoSystemRMJ-ECO32-DV-BURMJ-ECO32-DVB

5.9 or higher 32perEcoSystemlink

PowPak WirelessFixtureControlwithEcoSystem2 FCJ-ECO FCJS-ECO 0796554 or higher 3perEcoSystemlink

EnergiSavrNodeunitwithEcoSystemQSN-1ECO-S,QSN-2ECO-S

QSN-2ECO-PS120 UQSN-1ECO-S,UQSN-2ECO-S

9.027 or higher 64perEcoSystemlink

GRAFIKEyeQSunitwithEcoSystem QSGRJ-_E QSGR-_E — 9.009 or higher 64perEcoSystemlink

QuantumLightManagementHub QP2-_P_C — 3.2 or higher 4 64perEcoSystemlink

HomeWorksQSwithEcoSystemLQSE-2ECO-D QSGRJ-_E QSGR-_E

— 10 or higher5 64perEcoSystemlink

1 ForthemaximumwirelengthbetweentheLEDdriverandthestartofthelinearstrip,seechartsintheDriver Wiring and Mounting section.2 AlldevicesconnectedtoonePowPakWirelessFixtureControlwillbecontrolledtogether.Deviceswilldimtothesamelevelastheresultofacontrol

command.Thewirelessfixturecontrolwillneedtohaveitslow-endlevelreprogrammedtodimto0.1%output.Formoredetailonadjustinglow-endlightlevel,refertoApplicationNote#556atwww.lutron.com.

3 Forlowersystemversions,pleasevisitwww.lutron.com/LEDsystemchecktocheckifyoursystemrequireschanges.4 Version 3.1 (or later) is required to dim lower than 1%.5 Version 7.0 (or higher) is required to dim lower than 1%.

Hi-lume Premier

0.1 % Constant Voltage

LED Driver

ToEcoSystemDigitalLink

LED Light Engine

Line/Hot(L)LED+ 1

LED– 1Neutral(N)

Ground

E1

E2

To line voltage



Job Name:

Job Number:

Model Numbers:


369883d 11 04.19.17

Wiring (continued)

Continuous LED Light Run

In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult load manufacturer best practices for any additional consideration in load installation.

When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as possible for best performance.

Hi-lume Premier 0.1 % Constant

Voltage LED Driver

LED Light Engines

LED +

LED –

Hi-lume Premier 0.1 % Constant

Voltage LED Driver

LED +

LED –

LED +

LED –

LED +

LED –

LED Light Engine

LED Light Engine

LED Light Engine

Forinstallationbestpractices,pleaserefertoApplicationNote#591atwww.lutron.com



Job Name:

Job Number:

Model Numbers:


369883d 12 04.19.17

EcoSystem Wiring

EcoSystem Digital Link Overview•TheEcoSystemDigitalLinkwiring(E1andE2)

connects the digital ballasts and drivers together to form a lighting control system.

•Sensorsdonotconnectdirectlytodrivers.SensorsareintegratedthroughtheEcoSystemcontroller.

•E1andE2(EcoSystemDigitalLinkwires)arepolarity-insensitive and can be wired in any topology.

•PowerissuppliedtotheEcoSystemDigitalLinkfromthe control system.

•Protectedfrommiswiresofinputpower,upto 277 V~,toEcoSystemcontrolinputs.

EcoSystem Digital Link Wiring•EcoSystemDigitalLinkterminalsaccept20 AWGto12 AWG(0.50 mm2to2.5 mm2) solid or stranded copper wire per terminal.

•MakesurethatthesupplybreakertothedriversandEcoSystemDigitalLinkSupplyisOFFwhenwiring.

•E1andE2terminalsofthedriverscanbedaisychained as shown to the right.

•UsingtwodifferentcolorsforE1andE2willreduceconfusion when wiring several drivers together.

•TheEcoSystemLinkmaybewiredClass1or Class2(SeeLutronApplicationNote#142at www.lutron.com for more details). Consult applicable electrical codes for proper wiring practices. Ensure that the barrier placement is consistent with this wiring choice.

•Foremergencywiring,pleaserefertoLutronApplicationNote#106.

Notes•TheEcoSystemDigitalLinkSupplydoesnothave tobelocatedattheendoftheDigitalLink.

•EcoSystemDigitalLinklengthislimitedbythewiregauge used for E1 and E2 as follows:

Wire Gauge Digital Link Length (max)12AWG 2200 ft14AWG 1400 ft16AWG 900 ft18AWG 550 ft20AWG 352 ft

Wire Size Digital Link Length (max)2.5 mm2 828 m1.5 mm2 517 m1.0 mm2 310 m0.75 mm2 207 m0.50 mm2 155 m

E1 E2



Job Name:

Job Number:

Model Numbers:


369883d 13 04.19.17

Field Adjustment Knob

TheFieldAdjustmentKnobislocatedonthesideoftheHi-lumePremier0.1%ConstantVoltageDriver(L3D0)enclosure.Thisfeatureenablesthecustomertotunethelowestlightoutputachievedduringnormaloperation.Anexampleofthisscenarioisshownintheimagebelow.AdjustingtheFieldAdjustmentKnobofthelowerlightoutputdriverminimizesthelightoutputdifferenceandsetsthelow-endlightlevelat0.1%.Thisfeatureonly needs to be used in cases of mismatched loads that are separately controlled by 2 or more units.

TheFieldAdjustmentKnobcannotfixlightlevelmismatchamongloadsonthesamedriver.Forexample,twohomerunsofdifferentwattage.Forincreasingtheminimumlightoutputofallthedriversinaspace,pleaseuse thecontrol'slow-endtrimfeature.UsingtheFieldAdjustmentKnobforthispurposewilldegradeOn/Offtransitionperformance.

Figure 1: Cove Lighting with Mismatched Light Output at Low-End Due to Installation Variability

lutron.com lutron.com

lutron.com

2 W Load 0.1% dim level

96 W Load < 0.1% dim level

Figure 2: Cove Lighting After the Use of the Field Adjustment Knob Eliminates Mismatch without Costly Re-wiring



Steps:1. Set the control to low-end and turn all knobs fully

counter-clockwise2. Identify the driver with the lowest light output3. Turn the knob clockwise until the light output

matches the brightest driver4. Repeat steps 2-3 until all drivers match in low-end

light output



Job Name:

Job Number:

Model Numbers:


369883d 14 04.19.17

Facilities Manager

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

277 V~ NOTE: This equipment has been tested at 277 V~ and found to comply with the limits for a ClassAdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuser will be required to correct the interference at their ownexpense.

120 V~ NOTE: This equipment has been tested at 120 V~ and found to comply with the limits for a Class Bdigitaldevice,pursuanttopart15oftheFCCRules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorientorrelocatethereceivingantenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consultthedealeroranexperiencedradio/TVtechnician for help.

)Lutron,Lutron,Hi-lume,GRAFIKEye,PowPak,Quantum,HomeWorks,Pico,NovaT*,Nova,Skylark,Diva,Ariadni,Maestro,MaestroWireless,RadioRA,andEcoSystemaretrademarksofLutronElectronicsCo.,Inc.registeredintheU.S.andothercountries.

Soft-on,Fade-to-Black,EnergiSavrNode,andQwigFigaretrademarksof Lutron Electronics Co., Inc.

ENERGYSTARisaregisteredtrademarkoftheU.S.EnvironmentalProtectionAgency

Service

Driver WarrantyForwarrantyinformation,pleasevisit www.lutron.com/driverwarranty

Replacement PartsWhen ordering Lutron replacement parts, please provide the full model number. Consult Lutron if you have any questions.

Further InformationForfurtherinformation,pleasevisitusat www.lutron.com or contact our LED Control Center ofExcellenceat1.877.346.5338(U.S.A.andCanada only) or [email protected]

Hi-lume Premier 0.1% EcoSystem / 3-wire LED Driver with ...

Documents

Transcript of Hi-lume Premier 0.1% EcoSystem / 3-wire LED Driver with ...