HFO Feeder Module - VP · PDF fileHFO Feeder Module Standard configuration: Media Heavy Fuel...
1
www.vpindustries.eu Nylandsvej 36, DK-6940 Lem +45 9692 2000 [email protected] www.vestaspipecon.com Rev.No. 00 Page 3-3 HFO Feeder Module Standard configuration: Media Heavy Fuel Oil Viscosity 65 cSt. 90° C / 110 cSt a 80°C Power Suply 3x480V / 60Hz Flow (max) 0,9 m/s Operation pressure 8 bar Surface treatment Acc. to C3 Colour- standard RAL 7035 This unit is mounted with two pumps (one working and one standby), protected with strainers. Fitted with valves and check valves on the outlet. On common panel there’s mounted pressure gauge (inlet+outlet) and pressure switch (outlet). Pipe’s are insulated with 30 mm mineral wool, covered with sea worthy aluminium cladding EN5754. The module is delivered with counter flanges and foundation bolts. Option: • Power: 400V/50Hz • Pump seal: Magnetic seal • Power and pump seal: 400V/50Hz and Magnetic seal • Insulation: Soft insulation of valve, strainer and pump • Tracing: Electrical tracing with temp. reuglation • Surface treatment: According to, EN12944: 1998 level C4 M • Sea worthy packing: Wooden box ISPM 15 Document no.: Text Capacity m³/h Inlet/ Outlet NPSHr mWC Power - kW consumption 00294-01-0011 HFO 1 6 DN50 2,77 / 2,92 2,22 / 2,32 00294-01-0012 HFO 2 11 DN65 4,07 / 4,24 2,39 / 2,55 00294-01-0013 HFO 3 16 DN80 4,07 / 4,24 5,0 / 5,25 00294-01-0014 HFO 4 25 DN100 3,44 / 3,65 7,73 / 8,08 00294-01-0015 HFO 5 31 DN100 4,0 / 4,27 9,41 / 9,83 00294-01-0016 HFO 6 38 DN125 3,77 / 4,00 11,6 / 12,0 00294-01-0017 HFO 7 55 DN150 4,27 / 4,56 16,3 / 16,9 00294-01-0018 HFO 8 68 DN150 5,21 / 5,6 20,3 / 21,0
Transcript of HFO Feeder Module - VP · PDF fileHFO Feeder Module Standard configuration: Media Heavy Fuel...
www.vpindustries.eu
lef Produktblade_fortrykte_Layout 1 08/07/11 15.12 Side 1
Nylandsvej 36, DK-6940 Lem+45 9692 [email protected]
Rev.No. 00 Page 3-3
HFO Feeder Module
Standard configuration:Media Heavy Fuel OilViscosity 65 cSt. 90° C / 110 cSt a 80°CPower Suply 3x480V / 60HzFlow (max) 0,9 m/sOperation pressure 8 barSurface treatment Acc. to C3Colour- standard RAL 7035
This unit is mounted with two pumps (one working and one standby), protected with strainers. Fitted with valves and check valves on the outlet. On common panel there’s mounted pressure gauge (inlet+outlet) and pressure switch (outlet).Pipe’s are insulated with 30 mm mineral wool, covered with sea worthy aluminium cladding EN5754. The module is delivered with counter flanges and foundation bolts.
Option:• Power: 400V/50Hz• Pump seal: Magnetic seal• Power and pump seal: 400V/50Hz and Magnetic seal• Insulation: Soft insulation of valve, strainer and pump• Tracing: Electrical tracing with temp. reuglation• Surface treatment: According to, EN12944: 1998 level C4 M• Sea worthy packing: Wooden box ISPM 15
Document no.: Text Capacity m³/h Inlet/ Outlet NPSHr mWC Power - kW consumption
00294-01-0011 HFO 1 6 DN50 2,77 / 2,92 2,22 / 2,3200294-01-0012 HFO 2 11 DN65 4,07 / 4,24 2,39 / 2,5500294-01-0013 HFO 3 16 DN80 4,07 / 4,24 5,0 / 5,2500294-01-0014 HFO 4 25 DN100 3,44 / 3,65 7,73 / 8,0800294-01-0015 HFO 5 31 DN100 4,0 / 4,27 9,41 / 9,8300294-01-0016 HFO 6 38 DN125 3,77 / 4,00 11,6 / 12,000294-01-0017 HFO 7 55 DN150 4,27 / 4,56 16,3 / 16,900294-01-0018 HFO 8 68 DN150 5,21 / 5,6 20,3 / 21,0
