Herringbone - Spot On · line, creating two half-square triangles (HSTs). Press toward the darker...
Transcript of Herringbone - Spot On · line, creating two half-square triangles (HSTs). Press toward the darker...
Just KissesDesigned by Robert Kaufman Fabricswww.robertkaufman.com
Featuring
HERRINGBONE
For questions about this pattern, please email [email protected].
Finished quilt measures: 54-1/2” x 66-1/2”Quilt shown in “SILVER” colorstory. For alternate colorstories see pages 4-6.
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
SRK-16554-12 GREY
K001-1019 BLACK
(binding)
SRKM-16554-185 STEEL
SRK-16554-304 SHADOW
SRKM-16554-186 SILVER
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
1-5/8 yard
1-5/8 yard
1/2 yard
1/2 yard
5/8 yard
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/2 yards for backing
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
From each Fabrics A and B, cut:seven 7” x WOF strips. Subcut: thirty-nine 7” squares each of A and B.
From Fabrics C and D, cut:two 7” x WOF strips. Subcut: eleven 7” squares each of C and D.
From Fabric E, cut:seven 2-1/2” x WOF strips for the binding.
Notes Before You Begin
Cutting Instructions
page 3
Step 1: Pair a Fabric A square with a Fabric B square, RST. Mark a diagonal line on the wrong side of one square. Sew 1/4” away from both sides of the marked line. Cut on the marked line, creating two half-square triangles (HSTs). Press toward the darker fabric. Repeat to make seventy-seven A/B HSTs and twenty-two C/D HSTs. Trim each to 6-1/2” if necessary.
Assemble the Half-Square Triangles (HSTs)
Step 2: Arrange the HSTs as shown in the Quilt Assembly Diagram, noting the fabric placement and orientation of each unit.
Step 3: Sew the HSTs together to form rows. Press the rows to the left in the odd numbered rows and to the right in the even numbered rows.
Assemble the Quilt
Step 4: Sew the rows together to form the quilt center. Press the row seams open.
Your quilt top is now complete! Baste, quilt, bind and enjoy!
page 4
Fabric and Supplies Needed
HERRINGBONE - Gold Colorstory
Color Fabric Name/SKU Yardage
SRK-16554-2 BLACK
K001-1019 BLACK
(binding)
SRKP-16554-88 ICE
SRKM-16554-190 JET
SRKM-16554-303 BLANC
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
1-5/8 yard
1-5/8 yard
1/2 yard
1/2 yard
5/8 yard
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/2 yards for backing
page 5
Fabric and Supplies Needed
HERRINGBONE - Baby Colorstory
Color Fabric Name/SKU Yardage
SRK-16554-110 HOT PINK
SRK-16554-70 AQUA
SRK-16554-10 PINK
SRK-16554-215 SURF
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/2 yards for backing
K001-1339 SNOW
(binding)
1-5/8 yard
1-5/8 yard
1/2 yard
1/2 yard
5/8 yard
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
page 6
Fabric and Supplies Needed
HERRINGBONE - Primary Colorstory
Color Fabric Name/SKU Yardage
SRK-16554-69 MIDNIGHT
SRK-16554-5 YELLOW
SRK-16554-3 RED
SRK-16554-50 LIME
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/2 yards for backing
K001-7 TOMATO(binding)
1-5/8 yard
1-5/8 yard
1/2 yard
1/2 yard
5/8 yard