HenriYoungRegistered ProfessionalProscess ControlsEngineer.281-398-2561, 832-512-0720,Email:henri.lyh@gmail.comSeniorAnalyzerInstrumentElectricalProcessControlengineer with over15Yexperiencewith FEED, detailed design, simulation,Electric Power utility,refinery, maintenance,construction,commissioning and startup per API 6A, 14C,D E, F,FZ, J, 500, 520, 521and withrecord of success in propelling breakthrough in safe production of quality on spec. products.OBJECTIVESeeking a position as aSenior InstrumentElectricalandProcessControls engineeror lead engineer.CAREERSUMMARYBacked with MBA in Operational Management, career has spanned the acquisition and the practice of supervisory techniques from the main Oil and Gas EPC companies in mentoring youngerand olderengineersinoperatingplants. andEPC companies.Ensuringthat control systems are designed to enhance the operators ability to maintain safe, stable operation during both normal and abnormal operating circumstances.Providingcontrol system installations, which protect the environment and allow to operate within the permit restraints.Designingcontrol systems and specific instrumentation, which provide cost effective measurement and control that will result on-spec.products.AssistingI&E maintenance technicians in resolving technical problems.Developingand maintainingdocumentation of control systems.SupportingLoss control compliance with all plant policies, procedures and applicable regulations.Contribute to develop/maintain interface management system/proceduresMonitor interface issues between contractors and the clientAttend progress or monthly meetings with relevant contractorsContribute to monthly reportWork with project team to address and mitigate interface issuesExpedite outstanding interface issuesReport open and closed interface informationIdentify potential interface issues that may result in variation orders.Contribute to training and development of staffProcess and CEMS analyzersSuccessful implementation of process control and automation projects in accordance with business and regulatory requirementsProcess Safety Management PracticeContinuous ImprovementDevelop, maintain, and optimize Process Control Systems including operation and maintenance proceduresDevelop process control strategies and standards toimprove operational efficiencyEnsure compliance and enforcement of company, safety, environmental, governmental policiesand regulations.Providetechnical expertise in support of capital projects, process evaluation, and project modificationsProvide day-to-day troubleshooting assistance for instrumentation and controls to avoid or minimize production upsets and/or downtimeAssist with the instrumentation and process controls functional responsibilities (i.e.design, configuration, commissioning and startups) associated with capital and improvement projectsManage administrative and documentation requirements for tasks such as configuration backups, software revisions, downloading configuration changes, graphics development and modification, and implementing software changes of designAssisting in training operators on how the control systems function and in diagnosing operating problemsImplement /Maintain interlock test proceduresEnsure upkeep of the Control System peripherals and associated equipment in order to support production demandTroubleshoot and maintain DCSWonderware HMIGE Allen Bradley Rockwell PLCExperience in a PSM and ISO9001environmentAnalytical Engineer, from Applied Automation, Braun, Rosemount and ABB.Complex instrumentation, including custody flow meter stations, Remote Instrument Enclosures, Analyzer Shelters, complex analyzers, severe service valves, telecommunications, and complex control and safety systems.Design of process analyzer network architecture, analyzer house layout and grouping, sample system solutions, analyzer P&ID, sample probes and scrubbers.Development of analyzer system technical narrative specifications.Power GenerationOvation DCS,GE Gas turbinesSpeedtronics Mark VI,Emerson AMS, Allen-Bradley PLC, transmitters, control valves and Bolier feed water chemistryIuon exchangeReverse osmosis

TECHNICAL PROFILE1.Electric Utility Power generation,Refinery& Plastic PlantsProcess ControlsEngineeringInTool SPIDCS upgradeEmersonDeltaV, YokogawaHot cut overContractor and sub-contractor oversight.Process gascompressors (reciprocating, centrifugal, and screw),pumps (various types of centrifugal and positive displacement),Turbines (steam and gas), gas engines (internal combustionConstruction, Commissioning ,PSSR and star up.Contractor design review and approval.Contract administration and Change Orders validation and approval.Familiarity with company standardsOptimizingandimprovingplantperformance;Providingtechnical support tooperation group in problem solving and troubleshooting equipment;Initiating& implementingprojects to improve the safety, reliability, integrity, efficiency, and operability.Apollo Root Cause Failure Analysis.Provide maintenance support to plant.Sizing, selecting and specifying control systems equipment and instrumentsDeveloping control strategies and writing control narrativesDeveloping Cause and Effect Diagrams and/or SAFE ChartsControl Panel Design (electronic, pneumatic and/or hydraulic systems)Safety System Design, including IPF analysisAlarm ManagementFire and Gas System DesignTelecommunication SystemsPackage equipment engineeringRFQ packagesCreating deliverables for construction packages(Instrument Summaries, I/O lists, installation details, wiring diagrams, schematics, and loop drawings.2.Process ControlsEngineering in EPC firmsExecutingproject development during FEED (Front End Engineering Design) and Detailed Engineering;Process Controlssimulation byINDISS,HysysandProII to carry out the Heat and Material Balance and develop the PFDs& UFDs;P&ID development, hydraulic calculation, equipment sizing, datasheet, utility summary, overpressure protection, report write up, and Hazop analysis.Project planning & schedulingPrimavera R6, MSProject.FEL estimatingProject management and administration.SAP maintenance for accuracy in cost data and delivery.Monitoring data transfer from contractor systems to company.3.Commissioning, Loop tuning, PSSRand start upAnalyzersField InstrumentsDCS,PLCConduct Pre-start up Safety ReviewInspect installations and observe operations to ensure conformance to design.Utilize technical drawings, specifications of electrical and mechanical systems and components to ensure systems conformance.Direct and coordinate installation, maintenance, support, documentation, and testing activities.4.Technical & industrialLeadershipLead maintenance safety and environmental compliance initiatives.Lead predictive & preventative maintenance programs.Lead energy efficiency programs - steam, air, nitrogen.Develop and manage standard Work Procedures.Provide daily supervision of maintenance mechanical department.Provide plant turnaround/shutdown leadership.Maintain and improve union labor relations.Lead and direct specialty contractors.Liaison with engineers, operations,to discuss existing or potential engineeringAssist in developing capital project programs for new equipment and major repairs.PROFESSIONAL EXPERIENCESE RefinerySeniorInstrumentElectricalprocessControlsEngineer2012-presentAllen Bradley Rockwell PLC programmingHMIVFD configuration, Siemens, ABBDCS upgrade,Yokogawa Centum VP,Honeywell,EmersonDeltaVTeaching Engineering safety instrumentation methodologies to engineersatRefineries, Plastic,and LNG plants.Troubleshooting and plant maintenanceHands onindustrialexperience inRegulatory andAdvanced Process ControlsInterfacingdirectlywith HSE for development of SAFE charts as per API 14C.6 Sigma black belt in JIT construction.PI, PIMS hands on experience on Foxboro, Honeywell & Yokogawa DCS.Preparing Logic diagram for ESD programmingPLC software programmingComputer simulationProviding reports on the status of project milestones and adjust schedules.Checking, reviewing and approving product design for compliance with engineering principles, companystandards, customer contract requirements, andnational codes.Coordinating activities concerned with technical developments, scheduling, and resolving engineering designand test problems.Evaluating and approving design changes, specifications, and drawing releases.Interfacing with customers to provide project status reports and ensure customer needs are met.Attending design reviews to ensure design in accordance codes, standardsProvidingdirections to third party engineers and review their engineering deliverables;Catalyst run cycle prediction, Reformer catalyst regeneration,Hydro treatingcatalyst selection, loading, and pre-sulfiding;Completed UOP training for Reformer controlsDesign, operation and maintenance of process control systems, process safety systems, fire & gas systems, DCS's, PLC's,Specification and use of flow meters, measurement equipment, flow computers,analyzers, transmitters and control valves.Preparing Logic diagram for ESD programmingEnsuring Classification societies compliance , ABS, DNV, LREConceptual, FEED and detailedPLC software programmingSupervising the work of various designers/drafters and other Engineers.Conceptual design work and engineering analysis.Writing & reviewing technical proposals, equipment evaluations and sourcing.Equipment Factory Acceptance Testing and offshore field operations of hardware.Organizing assignments of designs to designers/drafters, technicians or other Engineers.Developing project budgets and schedules.Identifying project staffing requirements and coordinate staffing with supporting organization managers.Attending design reviews to ensure design in accordance codes, standardsSpecifying control systems hardware and field instruments, Automated Valves (Pneumatic, Hydraulic, Electric) Pressure Relief Valves, Analyzers, Fire and Gas detectors and systems, ICSS, Metering SystemsControl Narratives,Specification of DCS, SIS, F&G, and PLC systems;Developing Electrical Distribution Systems, Single Line Diagrams and Protection Schemes.Performing Electrical Short Circuit and Load Flow studies.Performing Electrical Protective Device Coordination Studies.Performing Electrical Arc Flash Analysis.Performing Hazardous Area Classification Studies.Developing Substation Arrangements.Preparing specifications and performing bid evaluations for:electrical equipment, electrical heat tracing systems, fire detection and protection systemsReviewing Vendor drawings for specification compliance.Coordination of in-house Electrical Design Drafting activities:power distribution systems (underground and overhead), lighting, grounding, electrical heat tracingMonitoring the type of work described above when performed by outside contractor engineers and designers, to ensure quality, timeliness and cost effectiveness.Interpretation and adherence to Technical Standards, industry standards and regulatory codes.Providing support to the installation of electrical equipment and systems.Performing shop and field inspection of electrical equipment and systems.Participating in plant start-up and troubleshooting.Reviewing, validating/challenging, and providing constructive feedback on new and revised Technical Standards and Site Practices relating to Electrical engineering.Active support of all SHE policies and procedures.Provide technical support and leadership solving issues in an integrated cross-functional team environment.Analyzing process configurations, unit operations, scale-up, equipment designs and optimization.Provide electrical engineering design guidance and technical leadership for the following industrial scale unit operations: biomass processing and handling, gasification, heat transfer, steam & power generation, fermentation, filtration, distillation, boilers, incineration, evaporation, effluent treatment systems, utilities.Works with License Support Contractor UOP.Works closely with the Project Manager and other key stakeholders to ensure projects are constructed on time and within budget. Liaises with contractors staff, attends construction and/or design meetings and reviews detailed designs and specifications.Builds and maintains positive relationships with colleagues, consultants, and key stakeholders to ensure projects run smoothly and to resolve concerns promptly and efficiently.Researches and sources new systems and resources, analyzes processes, procedures and working practices to identify and implement changes to increase efficiency, productivity and overall profitability. Maintains familiarity with current techniques and developments to sustain and improve technical skills.Provides guidance and mentoring to junior engineering staff members on more difficult problems and methods of approach. Researches new methods and establishes departmental practices and specificationsProvide input on selection of equipment, review, and approval of specifications to support projects.Design input and review of engineering contractor and vendor packages for:oPower distribution MV & HV, switching, grounding and usage (including variable speed drives and motors).oDirect current power supplies and circuits for instrumentation, DCS and PLC systems and safety interlocks/shutdowns.oControl and safety-relief valvesoAll instrumentation and field analyzers, both analog and discrete.oProcess control systems architectureUnderstand company HSE practices, policies and procedures, including the impact of I&E equipment and operations. Participating in cross-functional teams to optimize plant designs for cost effectiveness, reliability, and maintainability.Participate in Process Hazard Analysis studies (PHA).Participate in testing and evaluation of process control hardware and software.Start-up support.Maintain ongoing awareness of new developments in hardware and software technologies.To provide owner coordination of all issues associated with the plant instrumentation and electrical systems. to ensure that designs meet the business expectations.To support the commissioning activities for Vero Beach plant to ensure systems are commissioned safely and to schedule.Detailed knowledge of various electrical Codes (e.g. NEC and ANSI / IEEE) and industry instrumentation standards as applied to chemical plant facilities, working with E&I designers, Process Safety Management (PSM), Management of Change process, and Capital Value Process (CVP).

Skills, Education, & Knowledge Required

Education/ExperienceProven Electrical and Instrumentation Engineering experience (ideally 10 years minimum) in a chemical plant project/consulting environment.Degree in Electrical Engineering and professional engineering accreditation.Strong basic engineering skills with detailed knowledge of instrumentation and electrical equipment.Experience programming PLCs and DCS is desirable.Detailed knowledge of various electrical Codes (e.g. NEC and ANSI / IEEE) and industry instrumentation standards as applied to petrochemical facilities, working with I&E designers, Process Safety Management (PSM), Management of Change process, and Capital Value Process (CVP).General knowledge of process control hardware, software, and associated computer system and infrastructure.Thorough understanding of the engineering documents associated with electrical/instrumentation such as: P&IDs, loop sheets, specification sheets, electrical line diagrams, logic diagrams, installation detail drawings, etc.Skills/CompetenciesSincere commitment to safetyStrong leadership skillsBudgeting experienceStrong organizational skills along with the ability to handle a fast paced environment.Good verbal and written communication skillsGood computer skills

BechtelSenior Quality Assurance E I &C engineer 2009 - 2012Managingmaintenance and capital projects related to control systems improvements. Review controlsystem designs for safety, operability, and maintenance. Actively support the I&E maintenance groupwith resolution of technical problems.ShellRefinery CEP Project, inless than 8 months successfullydesigned andaudited, the Triconex (TMR) Plant Emergency Shutdown System and the Bently Nevada High Speed Rotating Equipment Condition Monitoring for the Optimization of the Honeywell ExperionPKS Distributed Control System and the plant Programming Logic Controllers including the. GE Fanuc, Multilin, Schweitzer Electrical Laboratory (SEL) power management.As the Process safety inspector and certification engineer executedAs an Installations surveyor, upon discovery of any low or high voltage mis-wiring, immediately went on to initiate repairs, reworks and replaced dispositions and avoiding loss of lives. Administered contracts awards and INTools database.As the sole RPEQ reviewed all designs and certified for client approval for the Curtis Island gas gathering and LNG projects.Certified designs for authority approvalProposal engineeringCoordinated with Offshore British Gas and ERGON, local Australian service providers.Developed and managed project schedulesMain and standby generator design and controlsLed the design of the systems for the Offshore projects including camp sites living quarterselectrical Power.Developed E I &C philosophies and implementation strategyChecked FEED contractor work for compliance to Company specifications, and National regulations,and industry standardsTransitioned design from pre FEED to FEEDQA/QC technical auditsGas gathering & LNGEnsured all equipment compliedwith classification zone ratingsEvaluated equipment selection with respect to facility life, cost, and maintainabilitySupported development of tender package and technical review of proposalsSupervised vendors in system commissioning and startup activities, including regulatory testing.Reviewed and approving PLC logic and Cause and Effect Diagrams in compliance with NFPA85 for interface with the Emergency Shutdown system, air movement and purging of toxic gases.Analyzed location installation of Fire and Gas detectors including fusible loops.Co-coordinated with engineers and craftsmen of multi-discipline activities.Diagnosed telecommunication problems and install control devices and other components for design improvement and interface with the LON Detronic F&G and ESD system.Halliburton / K Brown & Root Offshore Senior I&C engineer 2007 - 20091999 - 2003Seconded To BP as field engineer at the refineryWorked on Plastic reactors.Specifying control systems hardware and field instruments, Automated Valves (Pneumatic, Hydraulic, Electric) Pressure Relief Valves, Analyzers, Fire and Gas detectors and systems, ICSS, Metering Systems.Issued Field Material RequisitionsMaintained SAPPrepared Control Narratives for DCS configuration,Programming/Configuring DCS, SIS, F&G, and PLC systemsAllen Bradley, Rockwell, Honeywell, DeltaVProject initiation and MOC to improve performance and eliminate hazard;JacobsEG,Instrument, Electric, Process Control engineer 2004 2007SuncorrefineryManaged maintenance projects and capital projects related control systems improvement, working within the agreed budget and schedulerestraints Participatein the Process Hazard Analysis Steering Committee and provide technical expertise in the management of process hazards.Site surveysLOPA participationSIL calculationRFCA and FMCEAHAZID, HAZAN and HAZOPSAP modules from purchasing to installation.Verification of electrical for hazardous areas suitability.Fire Protection and Safety Data SheetsFire Hazard AnalysisReliability studies and Root Failure Cause Analysis on electrical equipment Continuous emission andprocess analyzers, large Pumps Compressors and gas turbines.ISA 84, IEC 61508, IEC 61511 and OSHA 1910 standardsUpgraded the Bently Nevada condition monitoring to 3500 series.Interfaced with Operations, Maintenance, Engineering, Safety, and Environmental, Process Technology,\ Specify Machinery Monitoring System (MMS), SCADA, and Fire and Gas Detection SystemDevelop detailed design in the installation and wiring of instruments and process control systemsGenerate technical requisitionsReview and evaluate vendor technical proposalsComputer SkillsMSOffice Excel, Word and Access, MSProjectPrimaveraIntergraph Smart Plant Instrumentation (Intools) , Process and Instrument modules, Instrument Index administration, Specification data sheets preparation.AcademiaMcGill university Part time lecturer in Instrument controls Robotics EngineeringUniversity of Louisville part time lecturer in Chemical & Electrical engineering departmentsShell Leweunhoorst Training Centre, Part Time I &C InstructorExxonMobil Research Training Centre, Part time, API practices instructorInstrument Society of America, Part time, I & C instructorCommunity contributionMentored Houston's High school students in the National For Inspiration Science and Technology (FIRST) Robot design and assisted students at Washington T in winning University Scholarships for engineering studies at Universities including MIT.Key Results:Delivered electrical and instrument design improvement solutions to Brownfield valued from $2M to $6M through process controls enhancements paving the way for gains in throughput (increases of up to 14%) coupled with cost and energy savings and downtime minimization in hydrate formation prevention.Worked with all levels of management and client teams to drive consensus, collaboration and forward momentum toward the completion of project milestones and the attainment of client goals.EducationFellow Grade Registered Professional Engineer, RPEQPost Graduate HV Electrical Marine Power EngineeringBS Electrical Instrument & Control Systems EngineeringACGI Electronics Telecommunications EngineeringAmerican Institute of Electronics and Electrical EngineersRecognitionBoard member of the Panel of Professional Engineers, responsible for guiding and interviewing candidates for membership admissions.