HELLER MCP H250 - s3.amazonaws.com fileApprox. 200 tool holders SK 50 : Probe with infrared receiver...
Transcript of HELLER MCP H250 - s3.amazonaws.com fileApprox. 200 tool holders SK 50 : Probe with infrared receiver...
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
HELLER MCP H250
2
MACHINE INFO
Manufacturer
Type
Year of manufacture
Control
Machine number
Travels
HELLER MCP H250 | | 2
NC rotary table 360.000 x 0,001°
Palletpool with 4 additional pallets (DIN 55201-A1) – size 500 x 630 mm
Approx. 200 tool holders SK 50
Probe with infrared receiver
Workpiece setup position manually rotatable (4 x 90°) with pallet unlocking
Hub swivel-pallet changer
Horizontal working unit
Working unit with transmission oil cooling (cooling unit)
Tool spindle with SK holder (steep taper)
Drill breakage control
Tool magazine with 52 tool places
Flushing device
Workroom shower
Internal coolant: 29 l/min at 50 bar (high pressure)
Total coolant: approx. 1.500 liter
Discharge height chip conveyor: 1.200 mm
Round storage
User guide / Documentation Machine parameters on disk
EQUIPMENT
| 3 HELLER MCP H250 |
TECHNICAL SPECIFICATIONS
Working range X axis
Y axis
Z axis
Max. workpiece interference contour (Ø x H) Guide system
Version with linear compact roller guide, size
Transmission elements
Precision ballscrews (Ø x pitch)
Feeding drive system
AC servo motors, closed design
Feed forces X- + Y-axis / at DC S3 – 40%
Z-axis / at DC S3 – 40% Speeds Feed speed in X-. Y- and Z- axes
Rapid traverse speed
Acceleration X- + Z-axes / Y-axis
B-axis NC rotary table Work unit Tool holder
Spindle diameter in front bearing
max. performance on the spindle DC S1 – 100% DC S6 – 40% DC S6 – 25%
| 4 HELLER MCP H250 |
| 5 HELLER MCP H250 |
max. torque at the spindle DC S1 – 100% DC S6 – 40% DC S6 – 25%
Speed programming
Speed range Tool magazine Magazine places
Magazine type
Max. tool diameter (all slots occupied)
Max. tool diameter (free places needed)
Max. bridge tool (free places needed / Dimensions with limitations)
Max. tool length from spindle nose
Tool shaft SK 50
Max. permissible tool weight
Max. permissible weight torque of the tool held on the gripper
Tool changing time - Weight till 12 daN / till 25 daN NC rotary table Division
Max. permissible clamping weight - middle
Max. tangential moment at clamped rotary table
Max. tilting moment at clamped round table
Rotation time – for 45° / 90° / 180°
Max. rotary milling torque – at DC S3 – 40% Pallet changer device Pallet type
Pallet size
Central fixing hole
Alignment bore
Mounting thread
Pallet chaning time according to VDI 2852
| 6 HELLER MCP H250 |
Positioning system X-, Y-, Z- axis direct with linear scales
Resolution
Positioning (according to VDI/DGQ 344 l) Coolant system 50 bar with chip conveyor Coolant tank capacity
High pressure pump - selectable pressure levels
High pressure pump capacity – at 50 bar
Chip conveyor conveying speed
Chip conveyor discharge height Painting
Textured finish
Installation data Machine weight
Power consumption - basic machine
Network connection
Control voltage
Compressed air
Compressed air consumption