industrial centrifugal pumps manufacturer, China centrifugal pumps supplier
Heavy Duty Centrifugal Pumpsamtpumps.com/site/wp-content/uploads/2017/01/STE-15-16.pdfCentrifugal...
2
High Flow Pump High Head Pump ® A Gorman-Rupp Company 400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials. Viton ® and Teflon ® are registered trademarks of E. I. Dupont. STE-15 HEAVY DUTY CENTRIFUGAL PUMPS 0 9 0 8 0 7 0 6 0 5 0 4 0 3 0 2 0 1 0 0 0 1 0 2 0 3 0 0 2 0 4 0 6 0 8 0 0 1 0 2 1 0 4 1 0 6 1 0 8 1 0 0 2 0 4 4 0 0 4 0 6 3 0 2 3 0 8 2 0 4 2 0 0 2 0 6 1 0 2 1 0 8 0 4 0 ) z H 0 6 ( M P R 0 5 4 3 @ y t i c a p a C 0 . 1 y t i v a r g c i f i c e p s r e t a W - d i u q i L 1 3 . 2 y b e d i v i d , i s p o t t r e v n o C ) * ( : s l e d o M d a e H h g i H ] W k 9 5 . 5 [ P H ½ 7 " ½ 1 × " 2 s e i r e S 0 4 2 4 = F ] W k 6 4 . 7 [ P H 0 1 " 2 × " 3 s e i r e S 0 5 2 4 = G ] W k 9 1 . 1 1 [ P H 5 1 " 2 × " 3 s e i r e S 1 5 2 4 = H 0 0 1 0 2 0 3 0 4 0 5 0 6 ] * . t f [ ] m [ ] m p g . S . U [ Total Head m [ 3 ] h / H G F ) F ( r H S P N ) H , G ( r H S P N 0 4 8 r H S P N ] m [ ] * . t f [ 0 2 1 0 1 1 0 0 1 0 9 0 8 0 7 0 6 0 5 0 4 0 3 0 2 0 1 0 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 0 1 0 1 1 0 2 1 0 3 1 0 4 1 0 5 1 0 6 1 0 7 1 0 8 1 0 9 1 0 0 2 0 1 2 0 0 2 0 4 0 6 0 8 0 0 1 0 2 1 0 4 1 0 4 5 0 8 4 0 2 4 0 6 3 0 0 3 0 4 2 0 8 1 0 2 1 0 6 0 ) z H 0 6 ( M P R 0 5 4 3 @ y t i c a p a C 0 . 1 y t i v a r g c i f i c e p s r e t a W - d i u q i L 1 3 . 2 y b e d i v i d , i s p o t t r e v n o C ) * ( : s l e d o M w o l F h g i H ] W k 9 4 . 1 [ P H 2 " ½ 1 × " 2 s e i r e S x 5 1 3 = A ] W k 4 2 . 2 [ P H 3 " ½ 1 × " 2 s e i r e S x 5 1 3 = B ] W k 3 7 . 3 [ P H 5 " ½ 1 × " 2 s e i r e S x 5 1 3 = C ] W k 9 5 . 5 [ P H ½ 7 " 3 × " 3 s e i r e S 0 6 2 4 = D ] W k 6 4 . 7 [ P H 0 1 " 3 × " 3 s e i r e S 1 6 2 4 = E 0 4 8 2 1 6 1 0 2 4 2 8 2 2 3 6 3 0 4 ] * . t f [ ] m [ ] m p g . S . U [ Total Head m [ 3 ] h / E D C ) C , B , A ( r H S P N ) E , D ( r H S P N 0 4 8 2 1 B A r H S P N ] m [ ] * . t f [ Performance of Heavy Duty Straight Centrifugal Pumps • Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller • Buna-N Mechanical Seal and O-Ring on Cast Iron Models • Viton ® Mechanical Seal and O-Ring on Stainless Steel and Bronze Models • Optional Silicon Carbide Seals Available • Front Drain Plugs Located 90° Apart • Maximum Head 194 Feet (84 PSI) • Maximum Flow 500 GPM • 2 HP to 15 HP NEMA Motors, Single and Three Phase • Optional Mounting Base Available • Solids Handling and Dirty Water Design Heavy Duty Centrifugal Pumps AMT Heavy Duty Solids Handling Centrifugal pumps are suited for liquid and chemical transfer, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/ or corrosion can develop in systems. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4” diameter solids and muddy or dirty liquids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are not self-priming and require flooded suction.
Transcript of Heavy Duty Centrifugal Pumpsamtpumps.com/site/wp-content/uploads/2017/01/STE-15-16.pdfCentrifugal...
High Flow Pump
High Head Pump
®
A Gorman-Rupp Company
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)For use with nonflammable liquids compatible with pump component materials. Viton® and Teflon® are registered trademarks of E. I. Dupont. STE-15
HEA
VY
DU
TY C
ENTR
IFU
GA
L P
UM
PS
0908070605040302010
0010203040506070809
001011021031041051061071081091002
0
02
04
06
08
001
021
041
061
081
002
04400406302308204200206102108040
)zH 06( MPR 0543 @ yticapaC0.1 ytivarg cificeps retaW- diuqiL 13.2 yb edivid ,isp ot trevnoC)*(
:sledoM daeH hgiH]Wk 95.5[ PH ½7 "½1×"2 seireS 0424 = F
]Wk 64.7[ PH 01 "2×"3 seireS 0524 = G]Wk 91.11[ PH 51 "2×"3 seireS 1524 = H
0
01
02
03
04
05
06]*.tf[ ]m[
]mpg .S.U[
To
tal H
ead
m[ 3 ]h/
H
G
F
)F( rHSPN)H ,G( rHSPN
0
4
8
rHSPN]m[]*.tf[
0210110010908070605040302010
0010203040506070809
001011021031041051061071081091002012
0
02
04
06
08
001
021
041
045084024063003042081021060
)zH 06( MPR 0543 @ yticapaC0.1 ytivarg cificeps retaW- diuqiL 13.2 yb edivid ,isp ot trevnoC)*(
:sledoM wolF hgiH]Wk 94.1[ PH 2 "½1×"2 seireS x513 = A]Wk 42.2[ PH 3 "½1×"2 seireS x513 = B]Wk 37.3[ PH 5 "½1×"2 seireS x513 = C]Wk 95.5[ PH ½7 "3×"3 seireS 0624 = D
]Wk 64.7[ PH 01 "3×"3 seireS 1624 = E
0
4
8
21
61
02
42
82
23
63
04
]*.tf[ ]m[
]mpg .S.U[
To
tal H
ead
m[ 3 ]h/
ED
C
)C ,B ,A( rHSPN
)E ,D( rHSPN0
4
8
21
B
A
rHSPN]m[ ]*.tf[
Performance of Heavy Duty Straight Centrifugal Pumps
• Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller
• Buna-N Mechanical Seal and O-Ring on Cast Iron Models
• Viton® Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
• Optional Silicon Carbide Seals Available
• Front Drain Plugs Located 90° Apart
• Maximum Head 194 Feet (84 PSI)
• Maximum Flow 500 GPM
• 2 HP to 15 HP NEMA Motors, Single and Three Phase
• Optional Mounting Base Available
• Solids Handling and Dirty Water Design
Heavy Duty Centrifugal Pumps
AMT Heavy Duty Solids Handling Centrifugal pumps are suited for liquid and chemical transfer, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4” diameter solids and muddy or dirty liquids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are not self-priming and require flooded suction.
®
A Gorman-Rupp Company
Manufacturer of AMT & IPT Pumps400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.
©2012 American Machine and Tool Company. All rights reserved.
STE-16
®
A Gorman-Rupp Company Heavy Duty Centrifugal Pumps
0716
Pump Dimensional & Specification Data
Model ‡ Curve HP PH Frame ENC SUC* DIS* A** B** C** D** E F** G J** K L** W** H
3156 1 56J 115/230 22/11 5.4 [13.8] 5.0 [12.7] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 17.4 [44.2]
19.2 [48.7]
16.9 [42.9]
17.9 [45.4]
20.0 [50.8]
17.4 [44.2]
24.2 [61.4]
21.7 [55.1]
27.0 [68.6]
22.5 [57.1]
27.0 [68.5]
26.0 [66.0]
26.0 [66.0]
21.5 [54.6]
26.1 [66.3]
25.2 [64.0]
25.2 [64.0]
10.6 [26.9]
11.4 [28.9]
10.6 [26.9]
10.6 [26.9]
12.8 [32.5]
10.6 [26.9]
13.9 [35.3]
12.8 [32.5]
16.2 [41.1]
14.3 [36.3]
16.2 [41.1]
15.0 [38.1]
14.6 [37.1]
12.6 [32.0]
15.9 [40.4]
14.7 [37.3]
14.7 [37.3]
9.6 [24.4]
3150 A 2 3 145JM TEFC 230/460 6/3 2 1½ 6.1 [15.5] 3.5 [8.9] 10.7 [27.1] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 2.7 [7.0] 1.3 [3.5] 9.6 [24.4]
3157 3 56J 230/460 6/3 5.4 [13.8] 3.6 [9.1] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 9.6 [24.4]
315A 1 56J 230 12 5.4 [13.8] 5.0 [12.7] 8.6 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 9.6 [24.4]
3151 B 3 3 182JM TEFC 230/460 8/4 2 1½ 7.1 [18.0] 6.6 [16.8] 10.9 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 3.7 [9.5] 0.3 [0.9] 9.6 [24.4]
315B 3 56J 230/460 8/4 5.4 [13.8] 3.6 [9.1] 8.5 [21.8] 3.5 [8.9] 2.5 [6.4] 4.0 [10.2] 4.3 [11.0] 2.4 [6.2] 1.3 [3.5] 9.6 [24.4]
315E 1 184JM 230 16 7.8 [19.9] 6.6 [16.8] 10.8 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 3.7 [9.5] 0.3 [0.9] 9.6 [24.4]
3152C 5
3 184JMTEFC
230/460 17/92 1½
7.1 [18.0] 6.6 [16.8] 10.8 [27.6] 4.5 [11.4] 2.5 [6.4] 4.0 [10.2] 4.4 [11.3] 3.7 [9.5] 0.3 [0.9] 9.6 [24.4]
4242 1 213JM 230 32 9.0 [22.9] 7.3 [18.7] 11.3 [28.9] 5.2 [13.3] 2.4 [6.2] 3.8 [9.7] 4.4 [11.3] 4.2 [10.8] N/A 11.1 [28.1]
4240F 7½
3 184JMTEFC
230/460 22/112 1½
7.1 [18.0] 6.6 [16.8] 10.6 [27.0] 4.5 [11.4] 2.4 [6.2] 4.5 [11.4] 4.5 [11.4] 3.7 [9.5] 0.1 [0.3] 10.5 [30.6]
4253 1 215JM 230 40 9.0 [22.9] 5.5 [14.2] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 10.6 [26.9]
4250G 10
3 215JMTEFC
230/460 26/133 2
8.1 [20.7] 7.3 [18.7] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 10.6 [26.9]
4251 H 15 3 215JM TEFC 230/460 47/24 3 2 8.1 [20.7] 7.3 [18.7] 11.5 [29.3] 5.2 [13.3] 2.7 [7.1] 4.7 [12.1] 5.0 [12.9] 4.2 [10.8] 0.3 [0.9] 10.6 [26.9]
(*) Standard NPT (Female) pipe thread.(**) This dimension may vary due to motor manufacturer's specifications.(+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/4".NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).
NOTE: Check Price Book for Specific Pump Construction/Material Availability.Maximum Solids Handling Capacity: 1/4" Diameter
Voltage@ 60 Hz +
Full LoadAmps
4264 1 213JM 230 32 9.0 [22.9] 7.3 [18.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 12.0 [30.4]
4260D 7½
3 184JMTEFC
230/460 22/113 3
7.0 [18.0] 6.6 [16.8] 11.6 [29.5] 4.5 [11.4] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 3.7 [9.5] 1.0 [2.6] 12.0 [30.4]
4265 1 215JM 230 40 9.0 [22.9] 6.2 [15.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 12.0 [30.4]
4261E 10
3 215JMTEFC
230/460 26/133 3
8.1 [20.7] 7.3 [18.7] 12.3 [31.4] 5.2 [13.3] 2.7 [7.0] 4.5 [11.4] 4.7 [12.1] 4.2 [10.8] 0.2 [0.7] 12.0 [30.4]
78
84
71
87
137
75
143
145
196
163
217
208
218
‡ Ship Wt.(Lbs.)
205
172
213
204
Standard Features• Stainless Steel, Bronze and Cast Iron Construction
• Buna-N or Viton® Mechanical Seal and O-ring, Depending on Model
• Optional Silicon Carbide Mechanical Seals Available
• Stainless Steel Motor Shaft and Hardware
• NEMA TEFC Single and Three Phase Motors, Depending on Model
• Optional Mounting Base Available for 182/184/215 JM Frames
• Self-cleaning Stainless Steel Impeller
• Maximum Working Pressure 150 PSI
• Maximum Temperature u Viton® 200° F u Buna-N 180° F• Optional Seal Wash Port and Hose Available on
All Models
• Pedestal Version Models Available for Frame Models 145/182/184JM
• QSP – Quick Ship Pump for Many Models
• Solids Handling Design
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 315A-95)
XCI (-95) Cast Iron Construction with Buna-N Seals
XB (-94) Cast Bronze Construction with Viton® Seals
XSS (-98) Cast Stainless Steel Construction with Viton® Seals
(All Models Come Standard with Stainless Steel Impeller)
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
0220
