HeatProbe Specifications Catalog - Heavy … · HeatProbe Specifications Catalog. Page 2 of 11 ......

2016

HeatProbe Specifications Catalog

of 11

SPECIFICATION SHEET

HeatProbe: 2000 Series

NPT Style

Type: Turbulated Immersion Heat Exchanger (HeatProbe) Heat Output: Oil/Fuel = 1.5 KW per lineal foot or 427 BTU per lineal inch at -30 C/-22 F.

Water = 3.0 KW per lineal foot or 854 BTU per lineal inch at 1 C/34 F. Immersion/Insert Length: Production sizes shall be 8”, 12”, 15”, 18”, 20”, 24”. Custom Manufactured lengths shall

be available in any size over 4” up to 40”. Fin-tube type: The exchanger tube shall be of SA-214, 14 GA, carbon steel with radial .016” L-foot aluminum fins

spaced at 10 FPI. Brass and SS exchanger tubes c/w fins are also available for water and/or corrosive fluids. Manifold type: The manifold shall be machined 304 SS. Thread type: The thread type shall be 2” NPTM Cap type: The exchanger’s (HeatProbe) epoxy threaded end plug shall be 304 SS. Coolant Ports: Coolant ports shall be 2 x 1/2” NPTF inline and 2 x 3/8” NPTF at 90 degrees from manifold.

3/8” NPTM brass plugs close off end ports not used. Tank Flanges: The tank flanges required to install the exchanger (HeatProbe) shall be 2" NPTF thread size half-

couplings, either weld-on or bulkhead. Weldless SS Tank Flange shall also be available for retrofit. Pressure Ratings: The exchanger (HeatProbe) shall have an internal pressure rating of 1100 KPA/160 PSI and an

external rating of 380 KPA/55 PSI with a max working temperature of 200 C/392 F. Installation: The installation of the exchanger (HeatProbe) shall be performed in accordance with Operation Manual. Warranty: The warranty on the exchanger (HeatProbe) shall be for 5 full years from Date of Purchase.

Model Insert

Length Thread

Size Output At -30 C

Output At -22 F

Typical Tank Sizes

HP 2008 8" 2" NPT 1.0 KW 3,400 BTU 15-30 USG 57-113 L

HP 2012 12" 2" NPT 1.5 KW 5,100 BTU 20-40 USG 76-151 L

HP 2015 15" 2" NPT 1.9 KW 6,400 BTU 25-50 USG 94-189 L

HP 2018 18" 2" NPT 2.3 KW 7,700 BTU 30-60 USG 113-227 L

HP 2020 20" 2" NPT 2.5 KW 8,500 BTU 35-70 USG 132-265 L

HP 2024 24" 2" NPT 3.0 KW 10,200 BTU 40-80 USG 151-302 L

of 11

SPECIFICATION SHEET

HeatProbe: 2000 Series

ORB Style

Type: Turbulated Immersion Heat Exchanger (HeatProbe) Heat Output: Oil/Fuel = 1.5 KW per lineal foot or 427 BTU per lineal inch at -30 C/-22 F.

Water = 3.0 KW per lineal foot or 854 BTU per lineal inch at 1 C/34 F. Immersion/Insert Length: Production sizes shall be 8”, 12”, 15”, 18”, 20”, 24”. Custom Manufactured lengths shall

be available in any size over 4” up to 40”. Fin-tube type: The exchanger tube shall be of SA-214, 14 GA, carbon steel with radial .016” L-foot aluminum fins

spaced at 10 FPI. Brass and SS exchanger tubes c/w fins are also available for water and/or corrosive fluids. Manifold type: The manifold shall be machined 304 SS. Thread type: The thread type shall be JIC No. 32 (2.5”-12), Straight Thread O-Ring Boss, with Jam Nut. Cap type: The exchanger’s (HeatProbe) epoxy threaded endcap shall be 304 SS. Coolant Ports: Coolant ports shall be 2 x 1/2” NPTF inline and 2 x 3/8” NPTF at 90 degrees from manifold.

3/8” NPTM brass plugs close off end ports not used. Tank Flanges: The tank flanges required to install the exchanger (HeatProbe) shall be JIC No. 32 (2.5”-12) half-

couplings, either weld-on or bulkhead. Weldless SS Tank Flange shall also be available for retrofit. Pressure Ratings: The exchanger (HeatProbe) shall have an internal pressure rating of 1100 KPA/160 PSI and an


Model Insert

Length Thread


Output At -22 F

Typical Tank Sizes

HP 2008-ORB 8" 2-1/2” - 12 1.0 KW 3,400 BTU 15-30 USG 57-113 L

HP 2012-ORB 12" 2-1/2” - 12 1.5 KW 5,100 BTU 20-40 USG 76-151 L

HP 2015-ORB 15" 2-1/2” - 12 1.9 KW 6,400 BTU 25-50 USG 94-189 L

HP 2018-ORB 18" 2-1/2” - 12 2.3 KW 7,700 BTU 30-60 USG 113-227 L

HP 2020-ORB 20" 2-1/2” - 12 2.5 KW 8,500 BTU 35-70 USG 132-265 L

HP 2024-ORB 24" 2-1/2” - 12 3.0 KW 10,200 BTU 40-80 USG 151-302 L

of 11

SPECIFICATION SHEET

HeatProbe Jr: 1300 Series

Type: Turbulated Immersion Heat Exchanger (HeatProbe) Heat Output: Oil/Fuel = 0.9 KW per lineal foot or 256 BTU per lineal inch at -30 C/-22 F. Immersion/Insert Length: Production sizes shall be 8”, 12”, 15”, 18”, 20”, 24”. Custom Manufactured lengths shall

be available in any size over 4” up to 30”. Fin-tube type: The exchanger tube shall be of SA-214 16 GA carbon steel tube with radial .016” L-foot aluminum fins

spaced at 10 FPI Manifold type: The manifold shall be Cadmium plated C1018 machined CRS. Thread type: The thread type shall be 1-1/4” NPTM Cap type: The exchanger’s (HeatProbe) epoxy threaded end plug shall be T6061 Aluminum. Coolant Ports: Coolant ports shall be 2 x 3/8” NPTF Tank Flanges: The tank flanges required to install the exchanger (HeatProbe) shall be 1-1/4” NPTF half-couplings,

either weld-on or retrofit bulkhead. Pressure Ratings: The exchanger (HeatProbe) shall have an internal pressure rating of 1100 KPA/160 PSI and an

external rating of 380 KPA/55 PSI with a maximum working temperature of 200 C/392 F. Installation: The installation of the exchanger (HeatProbe) shall be performed in accordance with Operation Manual. Warranty: The warranty on the exchanger (HeatProbe) shall be for 3 full years from Date of Purchase.

Model Insert

Length Thread


Output At -22 F

Typical Tank Sizes

HP 1308 8" 1-1/4 NPT 0.6 KW 2,000 BTU 4-7 USG 15-26 L

HP 1312 12" 1-1/4 NPT 0.9 KW 3,100 BTU 5-10 USG 19-38 L

HP 1315 15" 1-1/4 NPT 1.1 KW 3,800 BTU 7-14 USG 26-53 L

HP 1318 18" 1-1/4 NPT 1.4 KW 4,600 BTU 8-17 USG 30-64 L

HP 1320 20" 1-1/4 NPT 1.5 KW 5,100 BTU 9-18 USG 34-68 L

HP 1324 24" 1-1/4 NPT 1.8 KW 6,100 BTU 12-24 USG 45-90 L

of 11

SPECIFICATION SHEET

HeatProbe Mini: 0500 Series

Type: Turbulated Immersion Heat Exchanger (HeatProbe) Heat Output: Oil/Fuel = .43 KW per lineal foot or 123 BTU per lineal inch at -30 C/-22 F.

Water = .86 KW per lineal foot or 246 BTU per lineal inch at 1 C/34 F. Immersion/Insert Length: Production sizes shall be 10”, 17”, 21”, 23”, 28”. Custom Manufactured lengths shall be

available in any size over 4” up to 30”. Fin-tube type: The exchanger tube shall be knurled T6061 aluminum Manifold type: The manifold shall be Cadmium plated C1018 machined CRS. Thread type: The thread type shall be 1/2” NPTM Cap type: The exchanger’s (HeatProbe) epoxy threaded end plug shall be T6061 Aluminum. Coolant Ports: Coolant ports shall be 2 x 1/4” NPTF. Tank Flanges: The tank flanges required to install the exchanger (HeatProbe) shall be 1/2” NPT half-couplings,

either weld-on or retrofit bulkhead. Pressure Ratings: The exchanger (HeatProbe) shall have an internal pressure rating of 1100 KPA/160 PSI and an


Model Insert

Length Thread


Output At -22 F

HP 0510 10" 1/2" NPT .36 KW 1,200 BTU

HP 0517 17" 1/2" NPT .61 KW 2,100 BTU

HP 0521 21" 1/2" NPT .75 KW 2,600 BTU

HP 0523 23" 1/2" NPT .82 KW 2,800 BTU

HP 0528 28" 1/2" NPT 1.0 KW 3,400 BTU

of 11

SPECIFICATION SHEET Weldless Tank Flange RSF-2000 NPT Style Type: Retrofit Sandwich Flange Plate type: The Tank Flange Assembly shall be 304 SS. Thread type: The thread type shall be 2” NPTF Bolt/Washer/Nut type: The Flange’s fastening hardware shall be 304 SS 5/16” size Gasket type: Gasket shall be 1/16” thickness of ASTM D3676, 13.7 lb/ft Pressure Ratings: The exchanger Flange shall have an internal pressure rating of 1100 KPA/160 PSI and an

external rating of 380 KPA/55 PSI with a max working temperature of 200 C/392 F. Installation: The installation of the Flange shall be performed in accordance with Owner’s Manual. Procedure as

follows; 1. Cut 3” hole & Drill 4 x 3/8” holes by tracing Front flange 2. Insert backer plate (be sure to attach temp wire to prevent losing plate) 3. Push Studs through holes into position (maintain pressure) 4. Install Gasket 5. Install Front flange 6. Tighten up nuts/washers

Warranty: The warranty on the Flange shall be for 3 full years from Date of Purchase.

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6

of 11

SPECIFICATION SHEET Coolant Distribution Manifolds 20-DMS-X 20-DMD-XX Manifold type: The manifold shall be machined 304 SS. Thread type: The thread type shall be NPTF, Pressure Ratings: The manifold shall have an internal pressure rating of 150 PSI with a max working temperature of

400 Degrees F. Installation: The installation of the manifold shall be done according to Operation Manual provided. Warranty: The warranty on the manifold shall be for 5 full years from Date of Purchase.

Model Input Ports Output Ports

20-DMS-6 1each - 1.5” NPT 3each – 1” NPT 3each – ½” NPT

20-DMS-605 1each – ¾” NPT 4each – ½” NPT

20-DMD-12 2each – 1.5” NPT 10each – 1” NPT

20-DMD-1205 2each – ¾” NPT 8each – ¾” NPT

Dual Manifold Single Manifold

of 11

SPECIFICATION SHEET

Fuel Line Heaters HX-FLH-XX Type: In-line Fuel Warmer Outer Shell Tube: The Outer exchanger tube shall be of 304 SS. Production lengths shall be = 11”, 21”, 51”, Inner Fin-tube type: The Inner exchanger tube shall be of SA-214 16 GA carbon steel tube with radial .016” L-foot

aluminum fins spaced at 10 FPI. Coolant Manifold type: The Coolant manifold shall be machined C360 Brass. Fuel Ports: Fuel ports shall be 2 x 1” NPT or 2 x ½” NPTF. Coolant Ports: Coolant ports shall be 2 x 3/8” NPTF. Flow Ratings: The exchanger (Fuel Line Heater) will have a recommended flow rating capacity of min 1 to max 5

GPM. Installation: The installation of the exchanger (Fuel Line Heater) shall be done according to Operation Manual

provided. Warranty: The warranty on the exchanger (Fuel Line Heater) shall be for 5 full years from Date of Purchase.

Model Tube

Length Tube

Diameter Fuel Ports

Coolant Ports

HX-FLH-1005 11” 2” 1/2” 3/8”

HX-FLH-10 11” 2” 1” 3/8”

HX-FLH-20 21” 2” 1” 3/8”

HX-FLH-50 51” 2” 1” 3/8”

Mounting Bracket(s)

Included

¼” Bolt holes (2)

of 11

SPECIFICATION SHEET

Battery Warmer BW-4D8D Type: Battery Base Heater Base Type: The exchanger (Battery Warmer) shall be formed 1/8” Aluminum Plate. Battery Size: The exchanger (Battery Warmer) shall accommodate either a 4D or 8D size of battery Coolant Tube Type: The Coolant manifold shall be 5/8” OD Tubing. Coolant Ports: Coolant ports shall be 1/2” NPTF. Pressure Ratings: The exchanger (Battery Warmer) shall have an internal pressure rating of 150 PSI with a max

working temperature of 400 Degrees F. Installation: The installation of the exchanger (Battery Warmer) shall be done according to Operation Manual

provided. Warranty: The warranty on the exchanger (Battery Warmer) shall be for 1 full year from Date of Purchase.

of 11

SPECIFICATION SHEET Coolant Booster Pump CP-25xx Type: Centrifugal Coolant Pump Ports: The suction and discharge ports shall be 3/4" NPT x 3/4" NPT Pump Housing: The outer pump housing shall be 316 stainless steel Impeller: The impeller shall be 316 stainless steel Flow: The flow rate shall be max 24 GPM Head Pressure: The head pressure shall be max 12 PSI Power: The voltage shall be 12VDC or 24VDC Installation: The installation of the Centrifugal Coolant Pump shall be done according to Operation Manual provided. Warranty: The warranty on the Centrifugal Coolant Pump shall be for 1 full year from Date of Purchase.

of 11

HEATPROBE ACCESORIES

Note: Product Specifications for Accessories available separately

Hose – 5/8”, 3/4”, 1” Heavy Duty and Silicone Abrasion Sleeve, Hose Guard, Wraps & Insulation

Coolant Shut-offs – 5/8”, 1/2”,

3/4”, 1” Ball Valves, Gate Valves

Pipe Flanges – 1/2”, 1.25”, 2” Weld-in

Scully Flanges for NPT & ORB

Bulkhead Quick-Coupler

Manifolds Custom Assembled Installation

Kits c/w Fittings

HeatProbe Specifications Catalog - Heavy … · HeatProbe Specifications Catalog. Page 2 of 11 ......

Documents

Transcript of HeatProbe Specifications Catalog - Heavy … · HeatProbe Specifications Catalog. Page 2 of 11 ......