Chap. 7 Electrical Conduction in Metals and Alloys Chap. 8 ...
Heating Plug 230 VAC / 12 A CHAP-01/xx-12E · Doc.Id.: CHAP-01xx-12E_270718 Fernando Ceccarelli...
Transcript of Heating Plug 230 VAC / 12 A CHAP-01/xx-12E · Doc.Id.: CHAP-01xx-12E_270718 Fernando Ceccarelli...
1Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-CHAP-01/x5-12E.indd / 10.2018c / IL019210ZU / 136211200© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austriawww.eaton.com/recycling
Heating Plug 230 VAC / 12 ACHAP-01/xx-12E
+55°C*
-5°C
Technical Data / Technische gegevens / Tekniske data /Technische Daten / Technická data
Power supply 230 VAC +10% -15%, 50 HzPower standby 190mW (TYP)Load RLC, 12A (at 40°C, Derating*)Technology Eaton Patented Hybrid Zero-cross Switching lifetime 5×107 (TYP)Inrush current 500A@200us, 300A@1ms, 200A@3ms (TYP)EMS 3W to 2760W, 5% (>3W)RF 868,3MHz (xComfort compatible)Button Operation On / Off / BoostButton LED Multi-Color EMS power consumptionProfiles 5 PWM Heating ProfilesDimensions 100.3 x 52 x 56.9 mm (H x W x D)
55°C40°C
* Derating
-5°C
11 A10 A
9 A
12 A
MRF Version 2.60
RM Version V41cSHC-RF Version 2.21ECI-RF Version 2.01USB-RF Version 2.10
R
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio
����
Инструкция по монтажу
����
Montagehandleiding
Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Kullanma Talimatı
Упутство
Intruksjonsblad
Монтажна інструкція
868.3 MHz
IP20
F-Type (Schuko)
CHAP-01/F5-12E
E-Type
(Earthing pin)
CHAP-01/E5-12E
J-Type (S13)
CHAP-01/J5-12E
G-Type
(British Standard)
CHAP-01/G5-12E
OFF Boost
EMSMulti-color LED
Plug types
Multi-functionalButton
F-Type Schuko
CHAP-01/Fx-12E
E-Type
(Earthing pin)
CHAP-01/Ex-12E
G-Type
(British Standard)
CHAP-01/Gx-12E
J-Type (S13)
CHAP-01/Jx-12E
136211200.indd 1136211200.indd 1 22.10.2018 13:43:3822.10.2018 13:43:38
2Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-CHAP-01/x5-12E.indd /10.2018c / IL019210ZU / 136211200© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austriawww.eaton.com/recycling
or Controller
of Controller
oder Controller
eller Kontroller
nebo řídící jednotka
Button behaviour / Knopgedrag / Tastenfunktion / Knapp virkemåte / Funkce tlačítka
Notification / Notificatie / Benachrichtigung / Melding / Zpráva
Set Heating Profile / Verwarmingsprofiel instellen / Stille inn varmeprofil / Einstellen des Heizprofil /Nastavení topného profilu
136211200.indd 2136211200.indd 2 22.10.2018 13:43:5622.10.2018 13:43:56
3Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-CHAP-01/x5-12E.indd / 10.2018c / IL019210ZU / 136211200© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austriawww.eaton.com/recycling
>7 s
>7 s
Assign Sensor in Basic Mode / Sensor in Basic Mode toewijzen / Tilknytte i Basic Mode /Zuweisen im Basic Mode / Přiřadit v základním režimu
Remove Sensor in Basic Mode / Sensor in Basic Mode verwijderen / Fjerne i Basic Mode /Im Basic Mode löschen / Odstranit v základním režimu
Back to factory default / Terug naar fabrieksinstellingen / Tilbake til fabrikkinnstillinger /Zurück zu den werkseitigen Standard / Zpět na tovární hodnoty
flashing / blinker / knippertblinkt / blikání
flashing / blinker / knippertblinkt / blikání
1x
1x
136211200.indd 3136211200.indd 3 22.10.2018 13:43:5722.10.2018 13:43:57
4Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA-CHAP-01/x5-12E.indd /10.2018c / IL019210ZU / 136211200© 2018 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austriawww.eaton.com/recycling
EU- type examination performed by: TÜV Austria Services GmbH, Notified Body 1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2018
Doc.Id.: CHAP-01xx-12E_270718
Senior Vice President Director Quality General Manager & Systems
Friedrich Schröder Fernando Ceccarelli
Declaration of Conformity We, EATON Industries (Austria) GmbH 3943 Schrems, Eugenia 1 Austria declare under our sole responsibility as the manufacturer that the product (family) Eaton - Plug in adapter - heating,
CHAP-01/xx-12E (the declaration of conformity applies to all listed types within our actual product catalogue) provided that it is installed, maintained and used in the application intended for, with respect to the relevant manufacturers instructions, installation standards and “good engineering practices” complies with the provisions of Council directive(s): RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s): EN 300 220-2 V3.1.1, EN 300 489-1 V1.9.2, EN 301 489-1 V2.1.0, EN 301 489-3 V1.6.1, EN 301 489-3 V2.1.1, EN 50491-5-1:2010, EN 50491-5-2:2010, EN 60669-2-5:2017, EN 50581:2012
27.07.2018
136211200.indd 4136211200.indd 4 22.10.2018 13:43:5822.10.2018 13:43:58