HEAT TRANSFER AND EXCHANGERS -...
4
www.boostuae.com Tel: +971-24496000 Fax: +971-24496777 Email: [email protected] The course is formulated with objectives of understanding the heat transfer equipment, typical features and tube heat transfer and exchangers, design methods and design thumb rules, operation, control and troubleshooting aspects. The course further deals with how to optimize for both mechanical and thermal design requirements. HEAT TRANSFER AND EXCHANGERS MECHANICAL ENGINEERING AND MATERIAL SCIENCES SECTOR / ENGINEERING TECHNICAL & CERTIFICATE OF ATTENDANCE TRAINING COURSE
Transcript of HEAT TRANSFER AND EXCHANGERS -...
www.boostuae.com Tel: +971-24496000 Fax: +971-24496777 Email: [email protected]
The course is formulated with objectives of understanding the heat transfer equipment, typical features and tube heat transfer and
exchangers, design methods and design thumb rules, operation, control and troubleshooting aspects.
The course further deals with how to optimize for both mechanical and thermal design requirements.
HEAT TRANSFER AND EXCHANGERS MECHANICAL ENGINEERING AND MATERIAL SCIENCES
SECTOR / ENGINEERING TECHNICAL & CERTIFICATE OF ATTENDANCE TRAINING COURSE
WHAT ARE THE GOALS?By the end of the course, participants will be able to: ✓ Understanding the functions and applications of heat exchangers ✓ Learning about the basic principles of heat transfer and their application to design of heat exchangers, ✓ Analyzing the overall heat transfer coefficients ✓ Recognizing how to make specific considerations applicable to condensers, evaporators etc. ✓ Gaining understanding of design thumb rules, fouling effect, prediction and techniques of control ✓ Familiarizing with heat exchanger performance ✓ Exploring operation and control aspects ✓ Discovering maintenance and troubleshooting
WHO IS THE COURSE FOR?This course is suitable to a wide range of professionals but will greatly benefit:✓ Anyone who wants to become more familiar with heat exchangers and the methods of analyzing them ✓ Those who are engaged in design and/or specification of heat exchangers Staff ✓ Technologist ✓ Engineers
www.boostuae.com Tel: +971-24496000 Fax: +971-24496777 Email: [email protected]
HEAT
TRAN
SFER
AND
EXCH
ANGE
RS
www.boostuae.com Tel: +971-24496000 Fax: +971-24496777 Email: [email protected]
THE COURSE CONTENTDAY 1 ✓ Introduction to Heat Transfer ✓ Introduction to Conduction ✓ One-Dimensional, Steady State Conduction ✓ Two-Dimensional, Steady State Conduction ✓ Transient Conduction ✓ Introduction to Convection
DAY 2 ✓ Forced Convection - External Flow ✓ Forced Convection - Internal Flow ✓ Free Convection ✓ Heat Exchangers ✓ Radiation: Processes and Properties ✓ Radiation Exchange Between Surfaces
DAY 3 ✓ Classification based on application,
terminology and applications (typical) ✓ Fundamentals of heat transfer ✓ Concept of LMTD, overall HT co-efficient,
fouling factor ✓ TEMA classification and TEMA types ✓ Use of both kern method and bell (delaware)
method would be highlighted
DAY 4 ✓ Mechanical design of shell and tube heat
exchangers ✓ Baffles and support plates ✓ Design of tube sheet – general
requirements ✓ Tube sheet bending and shear formula ✓ Design of nozzles ✓ Pass-partition plates, end flanges and
bolting ✓ Mechanical design of components – tube
sheet, baffles, bonnet/shell cover
DAY 5 ✓ Problems with hydrodynamics aspects;
pressure drops, pumping power ✓ Investigate the parameters that affect heat
transfer coefficients ✓ Effects of fouling and remedial measures ✓ Malfunctioning – typical causes and
remedial measures ✓ Process control of heat exchangers
HEAT
TRAN
SFER
AND
EXCH
ANGE
RS
THANK YOU
BOOSTUAE.COM
HEAT TRANSFER AND EXCHANGERS MECHANICAL ENGINEERING AND MATERIAL SCIENCES
SECTOR / ENGINEERING TECHNICAL & CERTIFICATE OF ATTENDANCE TRAINING COURSE
