HEAT SHRINKABLE SLEEVES€¦ · are equipped with a metal core that maintains its rigidity after...

2
Resistant Different calibres Different lengths HEAT SHRINKABLE SLEEVES Multifiber networks for buildings FTTH Data Center Central Office Multifiber networks for buildings FTTH Data Center Central Office

Transcript of HEAT SHRINKABLE SLEEVES€¦ · are equipped with a metal core that maintains its rigidity after...

Page 1: HEAT SHRINKABLE SLEEVES€¦ · are equipped with a metal core that maintains its rigidity after heat shrinkage. LENGTH 30 mm 35 mm 45 mm INTERNAL HOLE DIAMETER 0.5 mm 0.5 mm 1.3

ResistantDifferent calibresDifferent lengths

HEAT SHRINKABLESLEEVES

Multifiber networksfor buildings

FTTHDataCenter

CentralOffice

Multifiber networksfor buildings

FTTHDataCenter

CentralOffice

Page 2: HEAT SHRINKABLE SLEEVES€¦ · are equipped with a metal core that maintains its rigidity after heat shrinkage. LENGTH 30 mm 35 mm 45 mm INTERNAL HOLE DIAMETER 0.5 mm 0.5 mm 1.3

Head office: Via degli Olmetti,18 – 00060 Formello (RM) Share capital: € 100.000,00 - VAT: 06557181002 Ph. +39 06 90405039, +39 06 90400349 – Fax +39 06 90409266 www.fibernet.it - [email protected]

HEAT SHRINKABLE SLEEVES

Heat shrinkable joint covers are used to protect fusion joints. They are equipped with a metal core that maintains its rigidity after heat shrinkage.

LENGTH 30 mm 35 mm 45 mm

INTERNAL HOLE DIAMETER 0.5 mm 0.5 mm 1.3 mm

METALLIC PIN DIAMETER 0.5 mm 0.5 mm 1.2 mm

METALLIC PIN LENGTH 30 mm 35 mm 45 mm

DIAMETER AFTER RESTRICTION 1.6 mm 1.6 mm 2.5 mm

TECHNICAL SPECIFICATIONS

PRODUCT DETAILS


0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit ...docs-europe.electrocomponents.com/webdocs/118d/0900766b8118da… · 1 0.5 mm Pitch, 1.2 mm above the board, Flexible

0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit ...docs-europe.electrocomponents.com/webdocs/118d/0900766b8118da… · 1 0.5 mm Pitch, 1.2 mm above the board, Flexible

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors2 FH52 Series 0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors Product Specifications Rating Rated current 0.5 A (Note 1) Rated voltage

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors2 FH52 Series 0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors Product Specifications Rating Rated current 0.5 A (Note 1) Rated voltage

nith.ac.inRadiography Accessories Maltese cross phantom pin diaphragm aluminium layer, stepped aluminium absorbers, O. 1/0.25/0.5/1.0/2.0 mm lead absorber, 0.5 mm plastic absorber

nith.ac.inRadiography Accessories Maltese cross phantom pin diaphragm aluminium layer, stepped aluminium absorbers, O. 1/0.25/0.5/1.0/2.0 mm lead absorber, 0.5 mm plastic absorber

POSITIONAL ACCURACY OF AEROPHOTOGRAMMETRIC SURVEY …€¦ · positioning accuracy in static mode (L1 / L2) of 3 mm + 0.5 ppm horizontally and 5 mm + 0.5 ppm vertically. The projection

POSITIONAL ACCURACY OF AEROPHOTOGRAMMETRIC SURVEY …€¦ · positioning accuracy in static mode (L1 / L2) of 3 mm + 0.5 ppm horizontally and 5 mm + 0.5 ppm vertically. The projection

ENe RS Pro Crimp Tool Open Barrel Terminal, 0.5 → 6.0 mm² ...

ENe RS Pro Crimp Tool Open Barrel Terminal, 0.5 → 6.0 mm² ...

ROBOT WELDING. - Fronius International GmbH metal thicknesses 0.5 – 2.0 mm 2.0 – 5.0 mm > 5.0 mm standard cmt pulsed twin tig laser hybrid crni metal thicknesses 0.5 – 2.0 mm

ROBOT WELDING. - Fronius International GmbH metal thicknesses 0.5 – 2.0 mm 2.0 – 5.0 mm > 5.0 mm standard cmt pulsed twin tig laser hybrid crni metal thicknesses 0.5 – 2.0 mm

STD Series Multi-Wire Connectors Specifications€¦ · Screw Terminal Tightening Test Torque 0.5 Nm N/A 0.5 Nm N/A 0.5 Nm N/A Screw Terminal Stripping Length 7.0 mm N/A 7.0 mm N/A

STD Series Multi-Wire Connectors Specifications€¦ · Screw Terminal Tightening Test Torque 0.5 Nm N/A 0.5 Nm N/A 0.5 Nm N/A Screw Terminal Stripping Length 7.0 mm N/A 7.0 mm N/A

TN1205 Technical note - STMicroelectronics · pitch FPN 2X3 UFDFPN 8 leads, 2x3x0.6 mm, 0.5 mm pitch ZW 13” 8 mm 4 mm 12 mm 4 mm FPN 3X3 UFQFPN 20 leads, 3x3x0.6 mm, 0.5 mm pitch

TN1205 Technical note - STMicroelectronics · pitch FPN 2X3 UFDFPN 8 leads, 2x3x0.6 mm, 0.5 mm pitch ZW 13” 8 mm 4 mm 12 mm 4 mm FPN 3X3 UFQFPN 20 leads, 3x3x0.6 mm, 0.5 mm pitch

Meiosis. Figure 13.2 (a) Hydra (b) Redwoods Bud Parent 0.5 mm.

Meiosis. Figure 13.2 (a) Hydra (b) Redwoods Bud Parent 0.5 mm.

STANDARD BEARING TUBES · Bearing quality: OD/ID max 0.5 mm Other qualities: OD < 100 max 0.5 mm OD > 100 max 0.5 % * OD Decarburization depth: OD/ID Standard lenghts: 4–9

STANDARD BEARING TUBES · Bearing quality: OD/ID max 0.5 mm Other qualities: OD < 100 max 0.5 mm OD > 100 max 0.5 % * OD Decarburization depth: OD/ID Standard lenghts: 4–9

Thermal Switching Cryogenic Heat Pipeslightly adverse tilt. The arbitrary tilt specification specified in the test plan required that the evapo-rator would be 1.3 +/- 0.5 mm above

Thermal Switching Cryogenic Heat Pipeslightly adverse tilt. The arbitrary tilt specification specified in the test plan required that the evapo-rator would be 1.3 +/- 0.5 mm above

33 30 40 40 50 56 56 56 70 70 70 70 83 83 83- 90 85 85 85 85 85- 95 105 mm 125- 125 120-0 130- 165 200 mm +0.5 20 +0.5 20 20+8S +0.5 25 +0.5

33 30 40 40 50 56 56 56 70 70 70 70 83 83 83- 90 85 85 85 85 85- 95 105 mm 125- 125 120-0 130- 165 200 mm +0.5 20 +0.5 20 20+8S +0.5 25 +0.5

Film Capacitors - EMI Suppression Capacitors (MKP) - B32911*3 … · 2020. 6. 26. · 0.5 < d 1 ≤ 0.8 mm 0.8 < d 1 ≤ 1.25 mm 10 N 20 N Resistance to soldering heat IEC 60068-2-20:2008,

Film Capacitors - EMI Suppression Capacitors (MKP) - B32911*3 … · 2020. 6. 26. · 0.5 < d 1 ≤ 0.8 mm 0.8 < d 1 ≤ 1.25 mm 10 N 20 N Resistance to soldering heat IEC 60068-2-20:2008,

PQM4000...• U4 AC voltage input max 4 mm 8 mm 0.8x3.5 mm BLADE 0.5 Nm M6 protective earth - - PH2 0.5 Nm Terminal fixing - - 0.8x3.5 mm BLADE 0.5 Nm PROTECTIVE EARTH DANGER! For

PQM4000...• U4 AC voltage input max 4 mm 8 mm 0.8x3.5 mm BLADE 0.5 Nm M6 protective earth - - PH2 0.5 Nm Terminal fixing - - 0.8x3.5 mm BLADE 0.5 Nm PROTECTIVE EARTH DANGER! For

i.MX50 Applications Processors for Consumer Products - Data … · 2018-12-17 · Case 416 MAPBGA 13 x 13 mm, 0.5 mm pitch Case 416 PoPBGA 13 x 13 mm, 0.5 mm pitch Case 400 MAPBGA

i.MX50 Applications Processors for Consumer Products - Data … · 2018-12-17 · Case 416 MAPBGA 13 x 13 mm, 0.5 mm pitch Case 416 PoPBGA 13 x 13 mm, 0.5 mm pitch Case 400 MAPBGA

ruvinbros.com · 2020. 7. 31. · FINISH, STYLE AND HARDWARE Base Molding:Ore, Eased Edge Base Shelf:Ore, 0.5 mm Vertical Panel:Ore, 0.5 mm Page - Project: Designer: Date: 14 of 16

ruvinbros.com · 2020. 7. 31. · FINISH, STYLE AND HARDWARE Base Molding:Ore, Eased Edge Base Shelf:Ore, 0.5 mm Vertical Panel:Ore, 0.5 mm Page - Project: Designer: Date: 14 of 16

PROGRESS-AMS-MLD, mm 1.4 ±0.5 - MLD POST ( mm ) 2.5 ±0.4 - % D stenosis post AMS 12.4 ±5.6 - late lumen loss, mm 1.1 ±0.5 - % D stenosis 48.2 ±17.2 FOLLOW-UP at 4 months N = 57

PROGRESS-AMS-MLD, mm 1.4 ±0.5 - MLD POST ( mm ) 2.5 ±0.4 - % D stenosis post AMS 12.4 ±5.6 - late lumen loss, mm 1.1 ±0.5 - % D stenosis 48.2 ±17.2 FOLLOW-UP at 4 months N = 57

3D Printing Solution ! ne FUNMAT PRO 410 · 2 Printing Nozzles Without Scraching 300 mm/s 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.2 mm Auto-cleaning station 1.75 mm PEEK, PEKK,

3D Printing Solution ! ne FUNMAT PRO 410 · 2 Printing Nozzles Without Scraching 300 mm/s 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.2 mm Auto-cleaning station 1.75 mm PEEK, PEKK,

Freely orbiting magnetic tweezers to directly ... - LMU Munich · Relative position in x (mm) –0.5 0 0.5 Relative position in y (mm) 0 0.5 –0.5 Figure 1 | Schematic of FOMT. (a)

Freely orbiting magnetic tweezers to directly ... - LMU Munich · Relative position in x (mm) –0.5 0 0.5 Relative position in y (mm) 0 0.5 –0.5 Figure 1 | Schematic of FOMT. (a)

i heat time z,r,B ua P for · Strip height : 5.5 m Strip pitch : 8 mm Clearance 0.5 mm Number of chambers : 3 Entrance pressure p : 1.425 bar Exit pressure : 0.950 bar Reservoir temperature:

i heat time z,r,B ua P for · Strip height : 5.5 m Strip pitch : 8 mm Clearance 0.5 mm Number of chambers : 3 Entrance pressure p : 1.425 bar Exit pressure : 0.950 bar Reservoir temperature: