Head Walls
-
Upload
ronan-niland -
Category
Documents
-
view
213 -
download
0
Transcript of Head Walls
-
8/22/2019 Head Walls
1/4
-
8/22/2019 Head Walls
2/4
Humes manufactures a comprehensiverange of standard headwalls to conform
with the requirements of individual stateand local authorities.
These headwalls may be customised toaccommodate multiple conduit applicationsfor both pipes and box culverts.
Also available on a regional basis are slopingheadwalls and endwalls - these are usedprimarily in property access applications.
Headwalls are used at both the inlet andthe outlet of a pipe system. While they areprimarily used in culvert applications theywill have application at the outlet point of astormwater system.
Culvert Applications
The natural water way will generally
be wider than the culvert structure andtransition sections will be required to receivethe upstream water, direct it through theculvert and then return it to the naturalwater course in an undisturbed manner.
Where the velocity of the water is of theorder of 4 metres per second the headwallis the most common structure used toeffectively achieve these conditions.
The wingwalls train the water and the
base slab combined with the wing wallsprovide protection for the embankmentand surrounds. Where exit velocitiesare high it may be necessary to incorporateenergy dissipators into the structure. Wheresediments are carried in the water it may benecessary to incorporate a silt trap at theexit.
Stormwater Applications
Where headwalls are used in theseapplications the key issue will be to train thewater in the path that will cause minimumturbulence and hence optimise the hydrauliccapacity of the line.
Headwalls
Purpose
Multiple Steel Reinforced Concrete Pipe Headwall
Multiple Steel Reinforced Box Culvert Headwall
Single Steel Reinforced Concrete Pipe Headwall
-
8/22/2019 Head Walls
3/4
Reduced installation time
Fewer people on site No reinforcement on site
No premix concrete
No waste, no clean up
No formwork
Remote sites are not an issue
Concrete at strength when delivered
No delays waiting to strip formwork
Ancillary components may be fitted
Standard Products
Humes manufactures a comprehensive range of standardheadwalls to conform with the requirements of individualstate and local authorities.
These headwalls may be customised to accommodatemultiple conduit applications for both pipes and boxculverts. Wing wall angles can be varied to suit thespecific application.
Also available on a regional basis are sloping headwallsand endwalls these are used primarily in propertyaccess applications.
Custom Solutions
Where a project requires specific needs we will workwith you to produce a dedicated design for a headwallthat provides a cost effective solution. We detail belowtwo examples of such design work which met the uniquerequirements of specific sites.
Irrigation Headwall - Cotton Area NSW
This headwall sited in a channel incorporates a pumpstation. The water is sourced from the Macquarie Riverand gravitates to the headwall where it is pumped intoan adjacent water storage area.
The system may be reversed so that the flow of waterreturns ensuring that the demand for water may bemet.
Modular Headwall - SE Queensland
The drainage design for a canal estate required aheadwall to be fitted onto a 2100 mm diameter pipe ina submerged situation.
The headwall was precast in modules and assembledat site and lowered into position, fitted and secured bydivers.
The insitu alternative was to construct a coffer dam,dewater the site, pour an insitu structure and thenremove the coffer dam.
This precast option was supplied and installed for 25%of the estimated cost of the insitu option.
BenefitsProduct Range
Innovative Precast Options
Irrigation Headwall - Cotton Area NSW
Modular Headwall - SE Queensland
-
8/22/2019 Head Walls
4/4
HEAD OFFICE
18 Little Cribb Street,Milton. QLD 4064.Tel: (07) 3364 2800 Fax: (07) 3364 2963
NORTH QUEENSLAND
Ingham Road,Bohle. QLD 4818.Tel: 1300 361 601 Fax: (07) 4758 6001
CENTRAL QUEENSLAND
MacLaughlin Street,Rockhampton. QLD 4701.Tel: 1300 361 601 Fax: (07) 4926 1837
SOUTH EAST QUEENSLAND
59 Sugarmill Road,Meeandah. QLD 4008.Tel: 1300 361 601 Fax: (07) 3866 7101
NEW SOUTH WALES
Cnr Woodstock Ave & Glendenning Rd,Rooty Hill. NSW 2766.Tel: 1300 361 601 Fax: (02) 9625 5200
NORTH WEST NEW SOUTH WALES
Showground Road, Tamworth. NSW 2340.Tel: 1300 361 601 Fax: (02) 6765 2683
VICTORIA
122a Dohertys Road,Laverton North. VIC 3028.Tel: 1300 361 601 Fax: (03) 9360 3887
TASMANIA
19-25 Churchill Park Drive,Invermay. TAS 7248.Tel: 1300 361 601 Fax: (03) 6335 6330
SOUTH AUSTRALIA
39-43 Maxwell Road,Pooraka. SA 5095.Tel: 1300 361 601 Fax: (08) 8349 4992
WESTERN AUSTRALIA
36-38 Felspar Street,Welshpool. WA 6106.Tel: 1300 361 601 Fax: (08) 9351 6977
NORTHERN TERRITORY
1606 Reichardt Road,Winnellie. NT 0821.Tel: 1300 361 601 Fax: (08) 8947 0535
Headwalls can be custom designed and manufactured tosuit the complete range of steel reinforced concrete pipe
and reinforced concrete box culverts we supply.
When you are designing, specifying or ordering aheadwall(s) it is necessary for us to obtain project specificdetails from you. These details will include the conduittype (Steel Reinforced Concrete Pipe, Box Culvertor Custom Profiled Pipe), the exposure classification(freshwater, saltwater or other) and the site specificgeometry including number of cells and angle of conduitto headwall if other than normal.
Your headwall(s) will then be manufactured tospecification and will perform in accordance with yourexpectations.
Single Steel ReinforcedConcrete Pipe Headwall
Multiple Steel ReinforcedConcrete Pipe Headwall
Multiple Steel ReinforcedBox Culvert Headwall
Ordering the Headwall Isometric Drawings
Multiple Steel Reinforced Concrete Pipe Headwall