Contents● Before you start

● PreparationOpening the storage case

Do not mark on the model and other compo-nents with pen nor leave printed materials in contact with the surface.Ink marks on the models cannot be removed.

Caution

Set includes/Dos and Don’ ts ・・・・・・・・

・・・・・・・・・・・

P.１

P.２

● Training

● After Training

Sites for Palpation

Swallowing movement

・・・・・・・・・・・・・・・

・・・・・・・・・・・・

P.３

・・・・・・・・・・・・・・・・・ P.４

P.３

MW30

Head and Neck Palpation Trainer

InstructionManual

Head and Neck Palpation Trainer for Training and OSCE

11412-000

11412-100

Product Supervision :Junji Otaki,Professor and Acting Chief of the Center,Center for Medical Education, Hokkaido University

1

Before you start Dos and Don’ts

Materials of the Trainer are special composi-tions of soft resin, and carries a certain amount of weight. Do not drop from tall spaces as strong impact can damage the Trainer

● Handle with care

Discoloration happens naturally over time. This will not affect the use of the product.

Long period of pressure on material could cause material to change shape

Make sure to store Trainer with case in upright position

● Do not use pen or ink on Trainer

When used on the Trainer, pen or ink will be absorbed by the material and can not be removed

● Wipe the Trainer with water or detergent

● Possible discoloration

Prevent any printed material from touching the surface of Trainer

● Do not place any printed material on surface of the Trainer

Prevent from exposing heat, humidity, and direct sunlight when storing after use. This is to prevent material from deterioration and damages.

Being in contact with other plastic or resin products could cause chemical reaction and/or material deterioration. Always store in the case after use.

Wipe stains or dirt with water or detergent. Do not use thinners or any liquid containing organic solvent.

● Store the Trainer in a cool, dry place

● Do not let the Trainer be in contact with other plastic or resin products during storage

● Do not lay flat during storage

１

１

a

a a

b

b

Set includes

Before your first use, ensure that you have all components listed below.

（storage case attached）

Instruction manual

Head and neck manikin

Talcum Powder

２

１

a

b（storage case attached）

Instruction manual

Head and neck manikin（type A ・type B）

Talcum Powder

Set includes

a

ｂ

● Head and Neck Palpation Trainer ● Head and Neck Palpation Trainer for training and OSCE

Dos and Don’ts

●Do not store printed material or other item together with model

２

Preparation

１ Opening the case

Opening the storage case

●Head and neck manikin is attached to the storage case at the bottom

1. Open zipper on top from both sides to open lid.

2. Open flap in front, which is fastened with velcro,and open zipper at the bottom from both sidesto fully open the case.

3. Once opened, fold storage case flaps behind manikin to start training.

caution : always use/store the case in upright position

３

Training

１ Sites for Palpation

２ Swallowing Movement

Palpation of cervical lymph nodes

By moving the lever on the back up and down, a swallowing movement is simulated

Examination of salivary gland　　　

Examination ofthyroid gland　　　

● Head and Neck Palpation Trainer

● Head and Neck Palpation Trainer for training and OSCE

Type A

Leftside

Pre-auricular nodesposterior auricular nodesSuperficial cervical nodesSupraclavicular nodes

Rightside

Leftside

Rightside

Superficial cervical nodesSubmandibular nodesPosterior cervical nodesThyroid gland

Superficial cervical nodesPosterior cervical nodesSubmental nodesSubmandibular nodes

Deep cervical nodesSubclavicular (Infraclavicular) nodesSubmandibular nodes

Type B

11 sites

2 sites

1 sites

posterior auricular nodes

Pre-auricular nodes

Parotid gland

Tonsillar nodes

Submandibular nodes

Submandibular gland

Submental nodes

Thyroid gland

Supraclavicular nodes

Subclavicular (Infraclavicular) nodes

Occipital nodes

Superficial cervical nodes

Posterior cervical nodes

Deep cervical nodes

Sternocleidomastoid

４

After Training

１ After training1. Wipe stains with wet tissue or a wet towel with added washing liquid.

2. Dry completely and add talcum powder to the surface of the manikin.

3. Open the folded flaps of storage case, raise flaps and close the zipper at the bottom.

Attention : Head and neck manikin is attached to the storage case. Always remember to store case in an upright position. Do not enclose anything else with the manikin inside the case.

5. Close the top lid, pull and fasten zipper.

4. Fasten the velcro on front flap.

Do not mark on the model and other components with pen nor leave printed materials in contact with the surface. Ink marks on the models cannot be removed.Caution

■ (World Wide)

The contents of the instruction manual are subject to change without prior notice.No part of this instruction manual may be reproduced or transmitted in any form without permission from the manufacturer. Please contact the manufacturer for extra copies of this manual which may contain important updates and revisions. Please contact the manufacturer with any discrepancies in this manual or product feedback. Your cooperation is greatly appreciated.

For inquiries and service, please contact your distributor or KYOTO KAGAKU CO., LTD.

2018.11

e

■

Kyoto Kagaku America Inc.